Search Results

Search found 8364 results on 335 pages for 'unable'.

Page 250/335 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Samba and Windows 7

  - by John Gaughan

  I built a new computer with the intention of it being primarily a home file server. Here is my setup: one desktop with Windows 7 64 HP one laptop with Windows 7 64 HP one desktop with Kubuntu 11.10 (server) The two desktops use static IPs, and I have hostnames mapped in the HOSTS files on all three systems. I have the same username/password combo on all three systems. I have been trying for a while now to set up Samba so the Windows 7 systems can see and use it. Even if I can get the server to show up, Windows is unable to log in. One of the first things I did was to enable LMv2 authentication, which this version of Samba (3.5.11) supports. The workgroup is set correctly. I can normally see the server, but cannot authenticate. Windows homegroup is turned off. Pinging between machines works fine, and the two Windows 7 systems work together flawlessly. What I am trying to do is set up Samba to use peer to peer networking using NTLM security and user-mode authentication. According to the documentation this is possible, but there are no examples that I could find. In all the googling I have done, I see a lot of people asking how to set this up but it either works for someone else and not for me (no idea what I'm missing), or it doesn't work. Has anyone gotten this to work? Is there a place I could download a smb.conf that is set up to work in this environment?

  Read the article

• Connection Issue

  - by Karl Schneider

  Desktop computer, connected directly into a Comcast modem. Every so often, at seemingly random intervals, my connection will drop. This could be while in the middle of browsing, or when I'm not even at the computer. When the connection drops, the modem still shows 4 green lights. The modem is connected to a splitter (cable and internet in same room), and then directly to the wall. To recover from the problem, I am forced to restart my computer, at which point everything works fine again. I have tried an ipconfig/release and renew, it tells me that it is unable to contact the DHCP server, and thus can't renew. I have updated the NICs driver, no luck. I have changed the ethernet cord, no luck. I have had Comcast replace the modem, no luck. The only thing I can think of that hasn't been replaced is the cords connecting the modem to the wall and the splitter. Can anyone think of anything else I may be able to do to isolate what's causing the issue?

  Read the article

• can not connect to SQL running on amazon ec2 machine

  - by njj56

  I am using SQL managment studio 2008 running on an Amazon EC2 machine. I am unable to connect to the database in my asp.net application. The EC2 instance has been set to accept connections over the SQL port. I am also able to remote the machine as well as view websites hosted on the server. Listed below is part of the connection string relating to this instance. When the program is ran and this connection string is called, it returns tcp error 0 - no return response. it just times out. <add name="ProjectServer" connectionString="Data Source=*IP ADDRESS HERE*,1433;Initial Catalog=*Catalog Name*;User ID=IP-0A6ED514\Administrator;"/> I removed the ip and the catalog name for the example, but I am sure they are correct. The only thing that I could think may cause an error, is the differences in names between the user id and the server name - the server name is ip-0A6ED514\sharepoint but the user name is ip-0A6ED514\administrator when I log into the sql server manager on the EC2 instance. A password is not used. Not sure if I would need to leave in a blank string for password - also not sure if the difference between server name and user id to log in makes a difference. Any help is appreciated. Thank you. update - when this connection string is used with out the port, i get tcp provider error 40 - when the port is in there, i get error 0 edit- the sql server is using windows authentication - does this make a difference? Usually I always use SQL server authentication

  Read the article

• Blender refuses to start

  - by Sekhemty

  I'm trying to run Blender under Linux, but I'm unable to do that, whenever I try I get some errors. I'm using Kubuntu 12.04 with KDE 4.11.1. This is my video card: ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610/M74 [Mobility Radeon HD 2400 XT] I used to have installed the fglrx proprietary Catalyst drivers, but lately they gave me some system-wide problems and I had to revert to the open source Mesa drivers (I don't think that these details are important, but just in case, the whole story is here). Whit the fglrx drivers Blender was running fine, but now, whenever I try to start it, I get this error message (some parts are in italian, but I think that they are easily understandable): ~$ blender connect failed: No such file or directory Writing: /tmp/blender.crash.txt Errore di segmentazione (core dump creato) The content of /tmp/blender.crash.txt is as follows: # Blender 2.68 (sub 5), Revision: 60150 # backtrace /usr/lib/blender/blender() [0x877a41f] [0xb7756400] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(_ZN4llvm3ARM8SPRClassC1Ev+0x15) [0xa8f4a9d5] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(+0x25ca48) [0xa8eefa48] /lib/ld-linux.so.2(+0xeeab) [0xb7765eab] /lib/ld-linux.so.2(+0xef94) [0xb7765f94] /lib/ld-linux.so.2(+0x12fa6) [0xb7769fa6] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/ld-linux.so.2(+0x127f4) [0xb77697f4] /lib/i386-linux-gnu/libdl.so.2(+0xbe9) [0xb4ff9be9] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/i386-linux-gnu/libdl.so.2(+0x133a) [0xb4ffa33a] /lib/i386-linux-gnu/libdl.so.2(dlopen+0x47) [0xb4ff9c97] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x3cbf0) [0xb7717bf0] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x4079d) [0xb771b79d] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x1a3aa) [0xb76f53aa] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(glXQueryVersion+0x2e) [0xb76f0cee] /usr/lib/blender/blender(_ZN15GHOST_WindowX11C1EP15GHOST_SystemX11P9_XDisplayRK10STR_Stringiijj18GHOST_TWindowStatei25GHOST_TDrawingContextTypebbt+0x11c) [0x8f54aec] /usr/lib/blender/blender(_ZN15GHOST_SystemX1112createWindowERK10STR_Stringiijj18GHOST_TWindowState25GHOST_TDrawingContextTypebbti+0xd7) [0x8f4f4a7] /usr/lib/blender/blender(GHOST_CreateWindow+0xb6) [0x8f4cf86] /usr/lib/blender/blender(wm_window_add_ghostwindows+0x205) [0x8799be5] /usr/lib/blender/blender(WM_check+0x50) [0x877b670] /usr/lib/blender/blender(wm_homefile_read+0x111) [0x87859f1] /usr/lib/blender/blender(WM_init+0xd2) [0x8787872] /usr/lib/blender/blender(main+0xe6e) [0x873848e] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0xb4e694d3] /usr/lib/blender/blender() [0x8778a99] The only thing that I can guess from this report is that the mesa drivers are somewhat involved, as I already suspected, but I don't have a clue on what I need to do to try to solve the issue.

  Read the article

• Win7 Domain User Profile- Desktop Icon management best practices request

  - by Doltknuckle

  Here's the situation: We have a large (5,000+ user) organization that is currently using folder redirection to manage the windows desktop icons. This folder is redirected to a network share where we can centrally manage the different sites and such. When a user tries to use a computer when the network is not available, they are unable to use any shortcuts in the Public folder. We only redirect the C:\Users\%username%\Desktop folder. Does anyone have any suggestions of how to go about managing desktop icons? We still want a central location to manage these items, but find a way to keep the system working when the network is unavailable. As a point of clarification, the network rarely goes down. We do have instances where a few computers do not have a network connection. Usually, something is simply unplugged. Since we have multiple sites, the line from a branch to the central office has gone down a few times. This is more of an attempt to maintain a positive end user experience when disconnected from the network.

  Read the article

• Cleaning a proxy/phishing trojan from Windows XP computer

  - by i-g

  I am trying to remove an interesting trojan from a Windows XP computer. It manifests itself as a phishing page (screenshot linked) that appears after the user tries to log on to eBay. So far, I haven't found any other web sites that are affected. As you can see, the trojan intercepts browser connections (all installed browsers are affected) and injects this phishing page. The address looks like it's ebay.com, but HTTPS verification doesn't work (no lock icon or green bar in Firefox.) At some point, Trojan.Dropper appeared on the computer. I removed it with Malwarebytes Anti-Malware. Although it reappeared several times, it seemed to be gone after I booted into Safe Mode and did a full system scan with MBAM. Now, however, a different trojan has appeared on the machine; I suspect it was installed by Trojan.Dropper. So far, MBAM, Ad-Aware, and Spybot S&D have been unable to remove it. I've looked for it in the HijackThis log but haven't found anything conclusive. Has anyone run across a trojan like this before? Where would I start looking for it to remove it manually? Thank you for reading.

  Read the article

• Running Jackd on Ubuntu for my External Firewire Sound card

  - by Asaf

  Hello, I'm running Ubuntu 10.04 and I have an external Sound card: Phonic Firefly 302. I've connected the device, installed Jackd, added the lines: @audio - rtprio 99 @audio - memlock 500000 @audio - nice -10 to /etc/security/limits.conf logged out, logged back in, ran qjackctl (sudo qjackctl to be exact), ran the settings and chose "firewire" on the driver option, pressed "Start" and that was the output: 20:10:19.450 Patchbay deactivated. 20:10:19.578 Statistics reset. 20:10:19.601 ALSA connection graph change. 20:10:19.828 ALSA connection change. 20:10:21.293 Startup script... 20:10:21.293 artsshell -q terminate sh: artsshell: not found 20:10:21.695 Startup script terminated with exit status=32512. 20:10:21.695 JACK is starting... 20:10:21.695 /usr/bin/jackd -dfirewire -r44100 -p1024 -n3 jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details 20:10:21.704 JACK was started with PID=22176. no message buffer overruns JACK compiled with System V SHM support. loading driver .. libffado 2.0.0 built Mar 31 2010 14:47:42 firewire ERR: Error creating FFADO streaming device cannot load driver module firewire no message buffer overruns 20:10:21.819 JACK was stopped successfully. 20:10:21.819 Post-shutdown script... 20:10:21.822 killall jackd jackd: no process found 20:10:22.230 Post-shutdown script terminated with exit status=256. 20:10:23.865 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Error: "/tmp/kde-asaf" is owned by uid 1000 instead of uid 0.

  Read the article

• Zabbix Proxy not collecting data

  - by syntaxcollector

  Hi All I have a working Zabbix 1.8.2 server collecting data for our office and our colo facility. However the link between the colo and office is flaky. What I'm trying to do is setup a proxy on the colo side to have a 1 hour cache and relay the data to our primary server at the office. Our zabbix server is compiled from source and uses a mysql database I've followed the instructions found in the zabbix documentation to compile the proxy using a sqlite3 database. I add the proxy to zabbix under Administration-DM-Proxies. The zabbix server "sees" the proxy because the "last seen" field is always under 60s. However when I assign a colo host to the proxy I stop receiving data from it. The colo host's zabbix_agentd.log file says this: 29343:20100622:124847 Timeout while answering request 29343:20100622:124847 Getting list of active checks failed. Will retry after 60 seconds The zabbix_proxy.log says this. 2041:20100622:123131.760 Deleted 0 records from history [0.000994 seconds] 2028:20100622:124131.671 Error while receiving answer from server [ZBX_TCP_READ() failed I also am unable to receive any SNMP data which is more important to me than the zabbix agent data. Has anyone had this problem before? Zabbix Server OS: CentOS5.4 Zabbix Server Build: 1.8.2 from source Zabbix Proxy OS: CentOS5.4 Zabbix Proxy Build: 1.8.2 from source P.S. The SQLite database on the zabbix proxy never gets any data written to it, it is identical to when I created it from the blank schema in zabbix-1.8.2/create/schema. (Yes I've checked the permissions)

  Read the article

• USB device goes to "Unknown device" randomly

  - by ILovePaperTowels

  We have a kiosk that uses a bio scanner from m2sys (usb device). It scans your palm to recognize you. Every so often, maybe 1-3 times a day, the bio scanner will become an unknown device. We are unable to see any patterns or commonalities. When we unplug and plug it back in, it becomes available again. We have custom software that uses the bio scanner's software to communicate with it. We've added a crap load of logging on everything but there doesn't seem to be any pattern of when the thing shuts off. We have these devices deployed to multiple locations (100+) and they are all seeing the issues but we can not reproduce it here, at the main office. I've evaluated the software and I don't see anything. I'm thinking it's a driver or hardware issue (but we can't reproduce the issues here in the main office) or maybe environmental interference of some sort like from scan guns, automatic doors, microwaves or something else. Any ideas would be welcome. I'm looking for possible causes of the usb device becoming unknown or ways to figure out what the cause is. no other usb devices have this issue, only the scanner We've contacted the manufacturer and they blame our software We're getting help from Microsoft, but they haven't found anything OS is embedded XP http://www.m2sys.com/palm-vein-reader.htm

  Read the article

• How to stop/kill a virtual machine that hangs in "Stopping" state?

  - by SvetP

  Hi, I have a virtual machine that constantly hangs in the “Stopping” state. I’ve red several posts suggesting killing the vmwp.exe process of the machine but I’ve never been able to kill this process neither from the Windows Task Manager nor from an administrative command prompt by using prockill /PID xxxx /F where xxxx was the process ID. The only result that I have is that my machine enters in “Stopping-Critical” state. Even worse, from that point (having a virtual machine hung at stopping) I am unable to manage (stop or start) any other virtual machine on the same host. The only “solution” in that case for me is to stop the Virtual Machine Management Service (vmms.exe) and to restart the physical host. Without first stopping the vmms.exe service my physical host also hangs during the restart. Moreover, there is no any error logged in the Event Viewer. I’ve found some other posts complaining about them problem. On all of them the only suggestion was to kill the vmwp.exe process, which obviously doesn’t work for them too. Can somebody help us with this, pls? Thanks

  Read the article

• Group Policy installation failed error 1274

  - by David Thomas Garcia

  I'm trying to deploy an MSI via the Group Policy in Active Directory. But these are the errors I'm getting in the System event log after logging in: The assignment of application XStandard from policy install failed. The error was : %%1274 The removal of the assignment of application XStandard from policy install failed. The error was : %%2 Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274 The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance. When I reboot and log in again I simply get the same messages about needing to perform the update before the next logon. I'm on a Windows Vista 32-bit laptop. I'm rather new to deploying via group policy so what other information would be helpful in determining the issue? I tried a different MSI with the same results. I'm able to install the MSI using the command line and msiexec when logged into the computer, so I know the MSI is working ok at least.

  Read the article

• What could cause a huge packet loss in Ubuntu 9.10, for both wired and wireless?

  - by xzenox

  I was previously using 9.04 fine (and in fact, I am posting this from my old 9.04 live cd). I tested the following install steps in a virtualbox vm prior to following the sames ones to upgrade my laptop: Download/burn ubuntu minimal cd (12mb one) Install ubuntu minimal sudo apt-get update sudo apt-get upgrade sudo apt-get ubuntu-desktop ubuntu-standard In the VM worked fine and I found myself with a working 9.10 ubuntu, network worked fine and I was able to test my backups and DropBox without a hitch (host was 9.04). When I followed the same steps on my laptop, everything worked up to after 9.10 being installed and working. As far as I can tell, everything besides eth0/wireless works. For some reason, I am unable to access the internet. Ping reports that over 99% of packets get lost (over an hour or so of pinging). This means for example that if I try hard enough, I can load a webpage but only at the cost of much patience... This happens both for a wired and wireless connection to my wrt310n (updated with latest firmware). At first I thought that it could be related to the ipv6 issues ppl have been experiencing however even after disabling ipv6 at the kernel level (through grub), I still get the issue. I do not think this is related to DNS issues or the likes since even when I ping my ISP's gateway IP, I have the same amount of packet loss. No DNS resolving should be required there. Access to my router works peachy with no packet loss there. I've tried different MTU values but to no avail. Note that this issue affects every web-enabled application: firefox, ping, synaptic, etc. The same hardware/router combo works with 9.04 but not with 9.10. In fact, when I did: sudo apt-get ubuntu-desktop ubuntu-standard after 9.10 minimal was installed, it downloaded over 400mb of packages without a hitch so my guess is that one of those packages either in ubuntu-desktop or ubuntu-standard is causing havok. Thoughts?

  Read the article

• "Open file location" is broken for Win Live Photo Gallery and Chrome

  - by Arnold Spence

  Symptoms: Windows Live Photo Gallery: Right clicking on an image (.jpg, .png) and selecting the context menu item "Open file location" should open the containing folder in explorer. Instead, I get an error dialog stating "This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." Chrome: After downloading a file (of any type), clicking the down arrow on the download status bar at the bottom and clicking "Show in folder" results in the same error dialog mentioned above. I'm using Windows 7. I'm pretty sure this is a registry entry gone bad but I've been unable to locate any information about this specific problem. It's not a file type association problem as I am not trying to open the files concerned, I'm trying to open an explorer window at the location for the file. I've found a similar issue that somebody had with explorer itself. However, the suggested registry fixes here for "Folder", "Directory" and "Drive" did not solve the problem. Also, If I use the searchbar in explorer to do a search, right click on a file and choose "Open file location", explorer jumps to that location without any trouble. I have not yet identified other programs with this issue.

  Read the article

• Exchange 2010 POP3/IMAP4/Transport services complaining that they can't find SSL certificate after blue screen

  - by Graeme Donaldson

  We have a single-server Exchange 2010 setup. In the early hours of this morning the server had a blue screen and rebooted. After coming back up the POP3/IMAP4 and Transport services are complaining that they cannot find the correct SSL certificate for mail.example.com. POP3: Log Name: Application Source: MSExchangePOP3 Date: 2012/04/23 11:45:15 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. SSL or TLS encryption can't be made to the POP3 service. IMAP4: Log Name: Application Source: MSExchangeIMAP4 Date: 2012/04/23 08:30:44 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. Neither SSL or TLS encryption can be made to the IMAP service. Transport: Log Name: Application Source: MSExchangeTransport Date: 2012/04/23 08:32:27 AM Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: Microsoft Exchange could not find a certificate that contains the domain name mail.example.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCH01 with a FQDN parameter of mail.example.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. The odd part is that Get-ExchangeCertificate show the cert as enabled for all the relevant services, and OWA is working flawlessly using this certificate. [PS] C:\Users\graeme\Desktop>Get-ExchangeCertificate Thumbprint Services Subject ---------- -------- ------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ....S. CN=exch01 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ....S. CN=exch01 ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ IP.WS. CN=mail.example.com, OU=Domain Control Validated, O=mail.exa... Here's the certificate in the computer account's personal cert store: Does anyone have any pointers for getting POP3/IMAP4/SMTP to use the cert again?

  Read the article

• Separate computers in my apartment can't communicate to each other?

  - by Razor Storm

  In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

  Read the article

• How to enable synergy 24800 (or some other port) through firewalld

  - by ndasusers

  After upgrading to Fedora 18, Synergy, the keyboard sharing system was blocked by default. The culprit was firewalld, which happily ignored my previous settings made in the Fedora GUI, backed by iptables. ~]$ ps aux | grep firewall root 3222 0.0 1.2 22364 12336 ? Ss 18:17 0:00 /usr/bin/python /usr/sbin/firewalld --nofork david 3783 0.0 0.0 4788 808 pts/0 S+ 20:08 0:00 grep --color=auto firewall ~]$ Ok, so how to get around this? I did sudo killall firealld for several weeks, but that got annoying every time I rebooted. It was time to look for some clues. There were several one liners, but they did not work for me. They kept spitting out the help text. For example: ~]$ sudo firewall-cmd --zone=internal --add --port=24800/tcp [sudo] password for auser: option --add not a unique prefix Also, posts that clamied this command worked also stated it was temporary, unable to survive a reboot. I ended up adding a file to the config directory to be loaded in on boot. Would anyone be able to have a look at that and see if I missed something? Though synergy works, when I run the list command, I get no result: ~]$ sudo firewall-cmd --zone=internal --list-services ipp-client mdns dhcpv6-client ssh samba-client ~]$ sudo firewall-cmd --zone=internal --list-ports ~]$

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

  - by Gary Kephart

  I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

  Read the article

• Since upgrading to Windows 8.1, I can't open any files on a SMB share shared by my OS X Mavericks Mac

  - by Gary

  I have a PC with Windows 8.1 and a Mac with Mavericks. I have a folder on the Mac that is shared with the PC. When I'm on the PC and I try to open a file that is shared by the Mac, such as an ISO file (a disk image), then I get a message saying that I cannot open the file, or the file is in use (it depends on the app/filetype). I have the same problem when I open a video file. Strangely, text files and PDF files are just fine. And if I copy any of the problematic files to the local Windows disk, then I can open them just fine. The specific error messages are: AVI files opened in VLC: "Your input can't be opened. VLC is unable to open the MRL." ISO files opened by Windows Explorer: "Sorry, there was a problem mounting the file." This only started happening after I upgraded to Windows 8.1 on the PC and Mavericks on the Mac. Mavericks upgraded its SMB version from SMB1 to SMB2, so perhaps that is related? Does anyone know what the problem might be, and how I could fix it? Thanks in advance!

  Read the article

• Exchange 2003 IMAP not working for some users

  - by John Gardeniers

  We normally don't have a need for IMAP connections from outside the company network but in order to allow a one user to use IMAP on a portable device I've turned it on and opened port 993 on the firewall. When the user in question was unable to get connected I tested this using Outlook remotely. Start by creating a new IMAP account in Outlook using a test account. No problems, it worked perfectly. Now try the same thing using the account of the user who actually needs to connect and it's a no-go. Outlook simply keeps prompting for logon credentials. Next I tried using my own account and that too failed. Testing with a couple of other accounts worked perfectly. Interestingly enough, with my own account I've used IMAP on a MAC before (internally) without a problem and I'm not aware of anything that has changed which could affect IMAP on my account. Checking the user settings in ADUC showed that all accounts have the same Exchange protocol settings. Specifically, IMAP is enabled. A check of the event logs on the server reveals no entries for the connection attempts, making this kind of difficult to debug. Has anyone here encountered such a situation and, even more importantly, what caused it?

  Read the article

• Protocol to mount fat32 network filesystem on Linux with ability to lock files ( not advisory locks

  - by nagul

  I have a fat32 filesystem sitting on a NAS storage device (nslu2) that I need to mount on my Ubuntu system. I've tried Samba and NFS mounts, but both don't seem to support proper locking. More specifically, I am unable to save files to the mounted drive through GNUcash, KeepassX etc, which makes the share fairly useless. Is there a protocol that allows me to achieve this ? Note that the NAS storage device is running a linux OS so I can run pretty much any protocol that has a linux implementation. The only option I'm not looking for is to reformat the partition to ext3, which I'm not able to do due to other constraints. Alternatively, has anyone managed proper locking of a fat32 system over the network using Samba ? Or, is advisory locking the best you get with a network-mounted fat32 file system ? I've thought of trying sshfs but I've not found any indication that this will solve my problem. Edit: Okay, maybe I can reformat the drive, but to any file system except ext3. The "unslung" nslu2 doesn't like more than one ext3 drive, and I already have one attached. So any solution that involves reformatting the drive to ntfs, hfs etc is fine, as long as I can mount it on linux and lock files.

  Read the article

• Setting up CIFS ISO Repository for Xen

  - by user85610

  I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

  Read the article

• VPN being blocked somewhere between either my BT2700HGV and DLink DFL-210

  - by Dom

  Hi, For some time I have been unable to get VPN working through my set up. I have a BT2700HGV Router (2 Wire Model) and as a firewall I have the Dlink DFL-210. You can't turn the firewall completely off on the BT2700HGV so I have it set to DMZplus mode for the Firewall. In theory this should then allow the VPN ports through. On the Firewall I have a series of rules set up and one is the pptp-allow rule which should allow access on the correct ports also. When I try to connect via VPN however the client machine gets an error 809. If I check the log on the Dlink firewall, I see this record: http://dl.dropbox.com/u/1041315/packetdrop.PNG The laptop I am testing the vpn with is connected directly to the BT2700HGV router and I am trying to VPN from it onto 81.138.86.217. I can't work out whether I have some sort of problem in the set up of the rules on my firewall or if the BT router (even though it's in DMZplus mode) is still blocking port 1723. I read somewhere that there where problems because BTs Openzone held onto this port for some reason. Any help would be greatly appreciated. If you need further screen shots or information then please let me know. I wasn't able to create new tags for the router and firewall name or insert the picture in as I am new to the forum. Dom :-)

  Read the article

• Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

  - by bob franklin smith harriet

  I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >