Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 251/647 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• Recover data from a Thecus N4100 NAS jbod partition

  - by TimothyP

  I have a Thecus N4100 NAS wich had a 2TB drive in it configured as jbod partition. Later I tried adding a second drive to expand the available space. I added it to the jbod configuration but I did not get any extra space. Then I tried removing the second drive but then the NAS system indicated the jbod configuration was damaged. After a reboot it told me there is no configuration and I need to create a new RAID/jbod configuration and that I would lose all data on the drive. Of course I did not do this, I took the 2TB drive and checked with Linux if the partition was still there and it is... completely intact. I found that linux recognizes it as a /dev/mdX device and that I should be able to mount it but I don't know the file system type. Anyway.... is there a way to recover the data? Since everything has always been on a single drive it should all be there right? I can connect the drive to Windows , Linux or MacOS so whatever gets the job done.

  Read the article

• Explorer.exe keeps crashing during log in

  - by asif

  I have got a weird problem. My windows 7 has two user accounts (both are administrator). I can log in to one account and do all sort of work. But whenever I try to log in to other account, it shows a blank screen and a messagebox pops up with "windows explorer has stopped working". The options available are: Close the program Check online for a solution and close the program The problem signature is as follows: Problem Event Name: InPageError Error Status Code: c000009c Faulting Media Type: 00000003 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If I press alt+ctrl+del and then select start task manager, it also crashes. I can not run any program using runas command (from good profile) too. The task manager and runas programs all show same problem signature. I read the similar question and followed all the steps, but no luck. Later, I viewed the event log and found that, explorer.exe could not access a file. I checked the location but the file is there. The actual message is: Windows cannot access the file C:\Users\testuser\AppData\Local\Microsoft\Windows\Caches\{AFBF9F1A-8EE8-4C77-AF34-C647E37CA0D9}.1.ver0x0000000000000020.db for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Windows Explorer because of this error. The question is, how can I resolve this issue? Should I just delete the file or replace it with another one to stop explorer.exe from crashing? offtopic: What is the content of this file and why it is necessary?

  Read the article

• Installing Windows 7 over PXE, preferably with domain autojoin

  - by Ivan Vucica

  At an educational non-profit, I've inherited a previously set-up Windows domain that, after the first reinstall of the machines, we ended up not using by simply not joining machines back into the domain. Over last summer, before the annual reinstall for shipping machines to the summer school, I toyed with the idea of installing Windows 7 over network, instead of just imaging the machines. It took a bit longer than I expected to figure out the basics; honestly, I expected that Windows would be more friendly for PXE installation out of the box. What I'm interested in is best practices for installing Windows 7 over PXE with domain autojoin. I'd love it if the whole setup could optionally be hosted on a UNIX based system as well. I've had some success by preparing an ISO using Windows Deployment Kit, and loading the ISO into memory. This was needed since I wanted a menu, and I think I couldn't get PXELINUX to chainload into Windows' bootloader. Unfortunately, I couldn't figure out much about customization of the Windows setup in that timeframe nor could I get Samba to work properly; studying the stuff ended up being too lengthy, especially the portion where I edited a disk image on Windows and copied it outside. WDK didn't make things easier by mounting the disk image into RAM, and writing it in its entirety when done with it, making me a very sad boy. I've recently found a different approach, too, that appears to be closer to Microsoft's original idea for netboot deployment and does not involve ISOs. So my question boils down to the following. What exact approach do you use for netbooting Windows 7 setup? How can Windows 7 setup be best customized to be completely unattended, including installation on specific system partition and not destroying the data partition, creation of passworded admin and default user, choice of MAC-address-based hostname, and joining a domain? As much details as possible for everyone's future reference would be appreciated. WDS isn't a bad choice, but if a Linux-based install can be used, that'd be better.

  Read the article

• Word 2010, Multiple Columns, Vertical center one column only

  - by Nancy N Jones

  I am creating a document with two columns in Microsoft Word 2010. I want the first column to be centered vertically. I want the second column to be on the same page and the vertical placement to be from the top. I highlight my text in the first column that I want centered vertically, then go to Page Layout Margins Custom Margins Layout, you can choose to center the vertical alignment. I have choosen the "Section Start" to be "Column" and also tried "Continuous." In all cases it always shifts all of my second column information to a new page. I don't want my second column text to be on a new page, I want it to be on the same page and vertically aligned from the top--not the center. Am I understanding the functionality of the Section Start on the Layout tab correctly? Maybe the page layout isn't the correct formatting to use. What I am really doing is formatting columns. I haven't found anywhere to format the columns for this. Am I missing some important column formatting features? I know that I can use the paragraph formatting and add space above the first line of text to make it look like it is centered vertically. However, this is a template for a master document and will be changed frequently. I really would like the first column text to be automatically formatted to be centered vertically without having to go in and manually change the space above the paragraph every time. Your assistance would be greatly appreciated.

  Read the article

• Is execution of sync(8) still required before shutting down linux?

  - by Amos Shapira

  I still see people recommend use of "sync; sync; sync; sleep 30; halt" incantations when talking about shutting down or rebooting Linux. I've been running Linux since its inception and although this was the recommended procedure in the BSD 4.2/4.3 and SunOS 4 days, I can't recall that I had to do that for at least the last ten years, during which I probably went through shutdown/reboot of Linux maybe thousands of times. I suspect that this is an anachronism since the days that the kernel couldn't unmount and sync the root filesystem and other critical filesystems required even during single-user mode (e.g. /tmp), and therefore it was necessary to tell it explicitly to flush as much data as it can to disk. These days, without finding the relevant code in the kernel source yet (digging through http://lxr.linux.no and google), I suspect that the kernel is smart enough to cleanly unmount even the root filesystem and the filesystem is smart enough to effectively do a sync(2) before unmounting itself during a normal "shutdown"/"reboot"/"poweorff". The "sync; sync; sync" is only necessary in extreme cases where the filesystem won't unmount cleanly (e.g. physical disk failure) or the system is in a state that only forcing a direct reboot(8) will get it out of its freeze (e.g. the load is too high to let it schedule the shutdown command). I also never do the "sync" procedure before unmounting removable devices, and never hit a problem. Another example - Xen allows the DomU to be sent a "shutdown" command from the Dom0, this is considered a "clean shutdown" without anyone having to login and type the magical "sync; sync; sync" first. Am I right or was I lucky for a few thousands of system shutdowns?

  Read the article

• trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

  - by Registered User

  Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6 cores) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. Edit Additional info.

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• 2011 i7 Macbook Pro unable to boot from any Windows CD?

  - by Craig Otis

  I'm encountering issues installing Windows alongside my Lion install. I'm attempting to install from the internal SuperDrive, after using Boot Camp to partition what was a single, HFS+ volume. When holding down Option at boot, the CD appears in the startup list, but upon selecting it, I get a gray screen for 5 minutes, then a flashing white folder. I tried installing rEFIt and using this to boot the CD, but I receive an error about "Not Found" being returned from the "LocateDevicePath", and a mention of the firmware not supporting booting using legacy methods. In the Console, when opening the StartupDisk preference pane (which never presents the CD as a selectable option), I see: 11/25/11 4:39:31.159 PM System Preferences: isCDROM: 0 isDVDROM:1 11/25/11 4:39:31.159 PM System Preferences: mountable disk appeared: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.214 PM System Preferences: - So far so good, passing disk to System Searcher. 11/25/11 4:39:33.218 PM System Preferences: OSXCheck: No boot.efi in System Folder or volume root. 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD I'm at a loss here. I've done my research, but it sounds like most of the rEFIt errors of this nature are caused by installing from a thumbdrive, or an external drive. I'm using the internal SuperDrive. Also, I've tried this with two different disks: A Windows XP SP2 CD A Windows 7 x86 DVD Both are disks I've had around for years, and I've used them reliably in the past. The system is an early 2011 15" Macbook Pro, all firmware updates installed.

  Read the article

• Windows Server 2008 R2 Finding Hidden files that are causing drive to fill up

  - by Xaxum

  What is the best way to find out what files are sucking up so much space? My Windows directory lists its size as 15 GB but when I run a powershell script against it, it shows 40 GB. It seems 40 GB is about right because if I use that 40 GB and add it to the rest of my folders on C I get the 45 GB that is in use. I checked volume shadow copy and that is disabled and there are no volume shadow files listed. My page file is limited to 3 GB. How can I find out what files are taking 25 GB of space? Final Results: We ended up disabling UAC and then the Properties showed the true file size of the Windows folder, as shown in powershell script. This allowed us to drill down to the folder that had the issues... In our case it was in C:\Windows\System32\config\systemprofile\AppData\Local\VMware\VDM there were several large dump files, these were the mysterious unknown files in WinDirStat. It turns out our nessus scan is crashing a view service for a couple seconds so it creates a large dump file. So we will try this.. https://discussions.nessus.org/thread/5212

  Read the article

• Permanently deleting files on Mac OS

  - by Jonik

  A while back, as relatively new Mac OS X user, I was surprised to learn that you cannot easily delete files. Directly, that is, without moving them to the trash first. On Windows and Linux this can obviously be done with ease, but not so on the Mac. I noticed this when trying clear up files from a USB memory stick — removing the files ("move to trash") does not free up space; that happens only after emptying the whole system-wide Trash. Not particularly convenient! (It seems stupid to have to empty the whole trashcan just to make some space on the USB stick. There might be gigabytes of stuff in there, and this sort of defeats its purpose - what if you'd actually need to restore something from the trash some day.) So, what's your way of getting around this? Have you bought a 3rd party application like RAW Trash for $16.95 just to delete files, or do you diligently empty the trashcan whenever needed? Or did I miss something? Also, can you convince me that this is actually the way it should be — that users shouldn't be able to fiddle with the filesystem easily? :)

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• Is my OCZ SSD aligned correctly? (Linux)

  - by Barney Gumble

  I have an OCZ Agility 2 SSD with 40 GB of space. I use it as a system drive in Debian Linux (Squeeze) and in my opinion it's really fast. But I've read a lot on aligning partitions and file systems... And I'm not sure if I succeeded in aligning the partitions correctly. Maybe the SSD could be even faster?? ;-) I use ext4 and here is the output of fdisk -cul: Disk /dev/sda: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78161328 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: [...] Device Boot Start End Blocks Id System /dev/sda1 * 2048 73242623 36620288 83 Linux /dev/sda2 73244670 78159871 2457601 5 Extended /dev/sda5 73244672 78159871 2457600 82 Linux swap / Solaris My partitions were created just by the Debian Squeeze setup assistant. So I didn't care about the details of partitioning. But now I think maybe the installer didn't align it correctly? Actually, 2048 looks good to me (better than odd values like 63 or something like that) but I've no idea... ;-) Help plz! According to some "SSD Alignment Calculator" I found on the web, the OCZ SSDs have a NAND Erase Block Size of 512kB and their NAND Page Size is 4kB. 2048 is divisible by 4 and 512. So are the partitions aligned correctly?

  Read the article

• Did chkdsk make it harder to restore files?

  - by neyl

  My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

  Read the article

• Fix bad superblock on logical partition

  - by Chris

  I was following http://www.howtoforge.com/linux_resi...xt3_partitions and when i reboot and run: root@Microknoppix:/home/knoppix# fsck -n /dev/sda7 fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda7 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> so i ran e2fsck with all the block numbers that you need (forget exactly what tool i used to find where the superblocks are hidden) no dice then i ran testdisk and had it look for the superblock, no results anyone have any ideas? fdisk -l for reference: root@Microknoppix:/home/knoppix# fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x97646c29 Device Boot Start End Blocks Id System /dev/sda1 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 38912 312046593 f W95 Ext'd (LBA) /dev/sda5 64 326 2104320 82 Linux swap / Solaris /dev/sda6 * 327 2938 20972544 83 Linux /dev/sda7 2938 38912 288968672+ 83 Linux To be honest it looks like I lost it... Next step if that happens is to dump the partition to an image file and hope i can find or write some software to parse through the data looking for known file headers, i think.

  Read the article

• unable to recover data from failed hdd

  - by Eslam Elyamany

  my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xe9fb38fb Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 40959999 20376576 7 HPFS/NTFS/exFAT /dev/sda4 40962046 976771071 467904513 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 82913280 86910975 1998848 82 Linux swap / Solaris /dev/sda6 86913024 394113023 153600000 7 HPFS/NTFS/exFAT /dev/sda7 40962048 82913279 20975616 83 Linux /dev/sda8 394122708 976768064 291322678+ 7 HPFS/NTFS/exFAT Partition 8 does not start on physical sector boundary. no sdc appears here , BUT it's appears on /dev/ rootghost-lap:/home/ghost# ls /dev/sd* /dev/sda /dev/sda2 /dev/sda5 /dev/sda8 /dev/sdb /dev/sdc1 /dev/sdc2 /dev/sdc6 /dev/sdc8 /dev/sda1 /dev/sda4 /dev/sda6 /dev/sda9 /dev/sdc /dev/sdc10 /dev/sdc5 /dev/sdc7 /dev/sdc9 also it appears in proc Code: rootghost-lap:/home/ghost# cat /proc/partitions major minor #blocks name 8 0 488386584 sda 8 1 102400 sda1 8 2 20376576 sda2 8 4 1 sda4 8 5 1998848 sda5 8 6 153600000 sda6 8 8 291322678 sda8 8 9 20975616 sda9 11 0 1048575 sr0 11 1 99136 sr1 8 32 244198583 sdc 8 33 14651248 sdc1 8 34 1 sdc2 8 37 15380480 sdc5 8 38 4153344 sdc6 8 39 48829536 sdc7 8 40 48829536 sdc8 8 41 110374551 sdc9 8 42 1975963 sdc10 and dmesg : [10604.777168] end_request: I/O error, dev sdc, sector 1 [10604.817238] sd 26:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10604.817243] sd 26:0:0:0: [sdc] Sense Key : Aborted Command [current] [10604.817248] sd 26:0:0:0: [sdc] Add. Sense: No additional sense information [10604.817253] sd 26:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 02 00 00 06 00 ok now , let's see what i've tried testdisk to check for partitions -- failed dd to copy data from /dev/sdcX -- provide strange output size for example /dev/sdc1 is about 15G , the output for dd is 62G+ so i had to cancle it safecopy successfully made an image for partitons , but can't fix images, can't mount it, can't do any thing with it and some other tools i've tried and all failed , so any idea ?

  Read the article

• NTBackup (on WS2k3) fails to backup remote server (WS2k8R2) with " Error: is not a valid drive, or you do not have access."

  - by Mark A

  We run an NTBackup job on a Windows Server 2003 R2 SP2 with all updates (as of Q4-2011). It works well backing up two WS2k3 servers as well as the backup server itself. However, we have been unable to successfully back up our Windows Server 2008 R2 machine ("G5-01"). It often runs for about 2GB worth of backup and then dies out with one of the below error messages. It should be more like 20GB for the full server. We have tried using the admin share (C$), an explicitly shared drive share, UNC and mapped drives. The result is the same each time, the only thing that varies is the amount of stuff backed up before it chokes. We've also run NTBbackup from the UI interface, from the command line and as a scheduled task. We are backing up to 400/800GB tapes and they have plenty of space available on them (blank media). Error: \\G5-01\c is not a valid drive, or you do not have access. Error: \\G5-01\c$ is not a valid drive, or you do not have access. Error: Y: is not a valid drive, or you do not have access. Error: Could not access or create backup catalog files. Verify that you have full access to the working folder and there is disk space available. The job is run as Administrator and we have no problems logging onto the server and transferring files. The Event Log on the WS2k8 is not much help, as it has success audits for each login. All of the hardware involved (HP DL360 G3, HP LTO Ultrium 3, Adaptec 39320A) has the latest supported drivers. We've seemingly tried a bunch of different options but are wondering where to look next to resolve the backup issue. We've been super happy with our reliable schedule task for years but this one is stumping us!

  Read the article

• Disable RAID to JBOD in server IBM x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• diskmgmt.msc: Cannot delete volume from USB

  - by Notinlist

  I have an USB drive with about 8GB of size. It has a single partition of size 169MB. Don't know why, I got it that way. I wanted to delete this small (FAT32) partition and create a single NTFS volume on it. First, I noticed that the "Delete volumme" option is disabled (grayed out). I then tried "Change drive letter and paths..." and removed "F:", that way I made sure that there are no open files on it. The "Delete volume" was still disabled. Then I got suspicious, and right clicked on the "Unallocated" area and I noticed that I did not have any useful option. All "New * volume" items are disabled. I exited from diskmgmt.msc, ran a cmd.exe with administrator privileges, ran the diskmgmt.msc from it, same experiences. Why can't i do anything with this disk? I've read some advices about downloading some alternative free software, but I rather not do it if possible. I still hope that Windows 7 Enterprise 64bit alone can reinitialize an USB drive without external help. I also cannot do anything with my other 8GB pendrive. It's all an NTFS volume, I tried to delete it, but the option is disabled here too. Maybe I have some settings somewhere that prevents my from partitioning USB disks. (I have the freedom to remove my D: partition which is the second - not counding the "System reserved" - on my SSD disk.)

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• How To Replace Laptop HDD Without Losing Data?

  - by Ishan

  Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

  Read the article

• Do eSATA HDD docking stations have a capacity limit?

  - by Michael Kjörling

  I'm looking at perhaps buying an eSATA docking station to be able to easily plug in and unplug hard disk drives, particularly but not necessarily only for backup purposes. Note: This is not a hardware shopping recommendation question. Please don't vote to close it as such. Looking at different models, I find for example this page detailing the Deltaco SI-7908SUS which specifically states "storage capacity: 1.5 TB" as well as "pictured hard disk not included, only for illustration". A customer review specifically mentions that it does not work with 3 TB drives, although does not go into any detail such as OS, drive model, etc. From a brief glance, the vendor's web site does not appear to say either way. Then there is the quite similar Deltaco SI-7908B3 which boasts on the box "all 2.5" and 3.5" HDD/SSD compatible". My question is: Why would what basically amounts to a SATA/eSATA adapter have any say in what storage capacity devices are supported? Does it? Assuming the OS supports the full capacity of the drive, why should introducing another (not even a different, really) connector change anything? Bonus question: Might it make a difference if the docking station exposes multiple interfaces (such as in the case of for example the SI-7908SUS exposing USB 2.0 and eSATA)? (I still think it shouldn't, but it'd be nice to have it confirmed.)

  Read the article

• Should I embed the sRGB color profile in JPEG files?

  - by basic6

  I have a large (growing) collection of scanned images. They are TIFF files, mostly 48 bit with the Adobe RGB color space. This color profile is integrated in the files. When such a file is opened in IrfanView (with plugins), it says (Image - Information) Adobe RGB 1998. "Normal images", like the JPG files from a digital camera, do not (necessarily) have a color profile integrated in the file. I understand that it's necessary to include the Adobe RGB profile in an image file which uses the Adobe RGB space, so the color values can be interpreted correctly. Here's a test image with a completely different color profile, programs that ignore the included profile (like MSIE8 or Gwenview) will render it as sRGB (?): I'm planning to convert my TIF files to JPG, so I'm wondering if there's anything wrong with using IrfanView that would save them as sRGB without embedding the sRGB profile. I've heard that images should always be saved with the color profile included. Since every image seems to be interpreted as sRGB by default (by software without color management), I don't understand why the sRGB profile should be included?

  Read the article

• Can't Install Win2k8 On KVM - Classic 0x80070013 error

  - by javano

  I am trying to install Win2k8 Std as a KVM guest on Debian Squeeze. As you can see from these screen shots; No drives are detected (I have blanked out a 20GB image for testing) - screenshot1 I am using this driver CD: - screenshot2 I have signed the Win7 driver (I assume this was the most appropriate one?) - screenshot3 I can now see an unpartitioned drive - screenshot4 But I can't create a new partition on here, getting the error code 0x80070013 - screenshot5 I have had this error code before but only on a physical server. If I remember correctly it was complaining because the disks were partitioned as GPT (because it was a server that was being re-purposed) so repartitioning with an MS-DOS table fixed that. This is a blank disk image though. What is wrong here, and how can I correct this? Thank you. UPDATE I have booted the VM with a Gparted-Live disk and formatted this volume with an MS-DOS partitioning scheme, and a single 20GB NTFS file system. Now when I boot the Win2k8 CD, load my drivers, I get a different error. As you can see at the bottom of screenshot6 "Windows cannot be installed on this hard drive space. Windows must be installed to a partition formatted as NTFS". Clicking format produces the error (0x80004005) on the screen, so I think this is still a driver issue because Windows can see the drive but not interact with it properly. Is that insane thinking?

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >