Search Results

Search found 11107 results on 445 pages for 'drive bay'.

Page 251/445 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• LSI MegaRAID LINUX got Optimal after degradation but strange POST message

  - by kesrut

  Linux server box with LSI MegaRAID controller got degraded. But after some time RAID status changed to Optimal. Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0 Size : 2.727 TB Mirror Data : 2.727 TB State : Optimal Strip Size : 256 KB Number Of Drives per span:2 Span Depth : 3 Default Cache Policy: WriteBack, ReadAdaptive, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Is VD Cached: No But now I'm getting RAID BIOS POST message: Your battery is either charging, bad or missing, and you have VDs configured for write-back mode. Because the battery is not currently usable, these VDs willl actually run in write-through mode until the battery is fully charged or replaced if it is bad or missing. (Image: http://cl.ly/image/1h1O093b1i2d) So may it be battery issue caused problem ? I get information about battery: BatteryType: iBBU Voltage: 4001 mV Current: 0 mA Temperature: 22 C Battery State : Operational BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : No Periodic Learn Required : No Transparent Learn : No No space to cache offload : No Pack is about to fail & should be replaced : No Cache Offload premium feature required : No Module microcode update required : No Where can be problem ? I'm disabled alarms, but get them if enabled. But don't know how find root of problem.

  Read the article

• Password Cracking Windows Accounts

  - by Kevin

  At work we have laptops with encrypted harddrives. Most developers here (on occasion I have been guilty of it too) leave their laptops in hibernate mode when they take them home at night. Obviously, Windows (i.e. there is a program running in the background which does it for windows) must have a method to unencrypt the data on the drive, or it wouldn't be able to access it. That being said, I always thought that leaving a windows machine on in hibernate mode in a non-secure place (not at work on a lock) is a security threat, because someone could take the machine, leave it running, hack the windows accounts and use it to encrypt the data and steal the information. When I got to thinking about how I would go about breaking into the windows system without restarting it, I couldn't figure out if it was possible. I know it is possible to write a program to crack windows passwords once you have access to the appropriate file(s). But is it possible to execute a program from a locked Windows system that would do this? I don't know of a way to do it, but I am not a Windows expert. If so, is there a way to prevent it? I don't want to expose security vulnerabilities about how to do it, so I would ask that someone wouldn't post the necessary steps in details, but if someone could say something like "Yes, it's possible the USB drive allows arbitrary execution," that would be great! EDIT: The idea being with the encryption is that you can't reboot the system, because once you do, the disk encryption on the system requires a login before being able to start windows. With the machine being in hibernate, the system owner has already bypassed the encryption for the attacker, leaving windows as the only line of defense to protect the data.

  Read the article

• .NET 3.5 installation comes up with Error 0x800F0906, then 0x800F0081F using dism

  - by Austin Meadows

  I've recently tried installing .NET 3.5 for an application on Windows 8.1. I used the OS's popup thing to download/install .NET 3.5 and always get error code 0x800F0906. Upon further research, I found I would have to pop in my Windows 8 CD and install it with this command, where "E:\" is where my CD is mounted: Dism /online /enable-feature /featurename:NetFx3 /All /Source:E:\sources\sxs /LimitAccess This and any derivative of it (e.g., removing /LimitAccess) has not worked for me and has either given me the same error code (0x800F0906) or a different one, 0x800F0081F. I've even copied the sxs folder to my hard drive, just in case something was going on with the CD Drive, only to have the same results. In that case, I used this command line: Dism /online /enable-feature /featurename:NetFx3 /All /Source:C:\dotnet35 /LimitAccess I find this surreal because in both cases, the files are indeed there but the program thinks it's not. Here's the CBS.log file. Any ideas on how to fix this? Any help is very appreciated :) EDIT: I now have a proper dism.log file, I'm not sure what happened to the last one or why it did that. Here's the link to the new log file. It's interesting to note that it doesn't recognize some of the commands in the script such as "featurename" or "source".

  Read the article

• Win8/7/XP print spooler not getting along with Zebra ZT230 via WIFI

  - by Jonathan M

  I have a graphics-intensive 4"x6" label I'm printing to the ZT230. I'm printing multiple (10) copies. When connected via USB, all goes well. However, when connected via wifi, I only get 2 of the labels. A wireshark capture shows that at some point in the process my computer (presumably my windows spooler) is sending a reset packet, which, I believe, would pretty much kill the print job. I'm getting the same results on Win8, Win7 and WinXP. The print job was originally generated on Zebra's ZebraDesigner2 software. For easier diagnosis, I captured it to a .prn file. The .prn file can be found here: https://drive.google.com/file/d/0BwxF_9SAkKzLLTF5bUJVT0lESUU/edit?usp=sharing And the wireshark capture file can be found here: https://drive.google.com/file/d/0BwxF_9SAkKzLTGpSS0ktZW1xV28/edit?usp=sharing And the printer configuration listing: https://docs.google.com/document/d/1zh1Tw4D4yNa2uljOIL1kO2z8se9HK859irpUEwyxlyY/edit?usp=sharing I've started a discussion with Zebra Tech Support, and they're working on it, but I thought I'd toss it out here for more ideas since we're getting kind of stumped. Any ideas why this may be happening?

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• Make isolinux 4.0.3 chainload itself in VMWare

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• After reinstallation, Disk Cleanup disappears when I click OK.

  - by James

  After I reinstalled Windows 7, Disk Cleanup stopped working. I can start Disk Cleanup and select the drive to clean, but when I click on the OK button, the window disappears. Any solutions? Here's the data from Windows LogsApplication :- EventData 1744235005 1 APPCRASH Not available 0 cleanmgr.exe 6.1.7600.16385 4a5bc5e1 Csi.dll 14.0.4733.1000 4b5662be c0000005 00135213 F:\Users\Jacob\AppData\Local\Temp\WER419.tmp.WERInternalMetadata.xml F:\Users\Jacob\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_cleanmgr.exe_6514b6ecb633f97cbf78e3a5bcae2c4bd74351_0d3b109c 0 75fa9599-41b1-11e0-b864-001966b2bcb6 0 The above one was with an Information icon. The one below was with an Error icon:-- EventData cleanmgr.exe 6.1.7600.16385 4a5bc5e1 Csi.dll 14.0.4733.1000 4b5662be c0000005 00135213 bbc 01cbd5be36b572bf F:\Windows\system32\cleanmgr.exe F:\Program Files\Common Files\Microsoft Shared\OFFICE14\Csi.dll 75fa9599-41b1-11e0-b864-001966b2bcb6 I also used process explorer:- When i started disk cleanup, a cleanmgr.exe process appeared under explorer.exe.But when i clicked on the "OK" button after selecting the drive, cleanmgr.exe was there for some seconds before it disappeared. But a new process - WerFault.exe appeared under svchost.exe a few seconds after i clicked the "OK" button. It disappeared, too, from the process list after some time (i think it disappeared along with cleanmgr.exe).

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• PC only boots from Linux-based media and won't boot from DOS-based media

  - by xolstice

  I have this problem where the PC only seems to boot from a floppy disk or CD if it was created as a Linux-based bootable media. If it was created as a DOS-based bootable media the system just freezes at the starting point of the boot process. I originally asked this under question 139515 for CD booting only, and based on the given answers, I was under the impression the problem was with the CD-ROM drive; however, I have since installed a newly purchased CD-ROM drive and the same freezing occurs. This then made me try the DOS bootable floppy disk approach and I was quite surprised that it exhibited the same freezing problem. I then tried try a Linux bootable floppy and everything booted from it without any issues. As I mentioned in my original question, the PC was booting just fine from the DOS-based bootable CD, and then it suddenly decides to pull this freezing stunt. I can't remember if I changed anything in the BIOS settings that may I have caused the problem, but I am wondering if that could be the case - it is currently using the Award Module BIOS v4.60PGMA. Can anyone help?

  Read the article

• MSSQLSERVER Will Not Start - Event ID 913 and 1814

  - by ThaKidd

  Hello ServerFault! I need some serious help. I have a major database server down and am scratching my head at how to fix it. The server was hit by rolling black outs last week in Dallas and sense then, Microsoft SQL 2005 SP2 will not start up. I am getting the following errors (both when starting the service and while trying to execute mssqlsrv.exe -c -f -m: Event Type: Error Event Source: MSSQLSERVER Event ID: 913 Could not find database ID 3. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred. and... Event Type: Information Event Source: MSSQLSERVER Event ID: 1814 Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized. I have tried to rename the tempdb.mdf to tempdb.old with no success. I have checked and have 193 GB of free hard drive space. What else might cause this problem? Could the server need a chkdsk ran on it or do I need to be looking at some area of the database server? Any help is greatly appreciated. Thank you in advance.

  Read the article

• Will just a couple of thermal "trip" shutdowns typically damage a CPU?

  - by T.J. Crowder

  The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

  Read the article

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• Drobo FS vs Lime Technology unRAID vs FreeNAS

  - by elluca

  I already decided to by a drobo fs until I just found these two tests: http://www.digitalversus.com/data-robotics-drobo-fs-p889_9543_487.html http://www.digitalversus.com/lime-technology-unraid-p889_8992_473.html The two cons agains drobo for me: loudness price What disadvantages has the unraid stuff against the drobo fs? Has it also got that ease of use like swapping drives on the go, simply extend capacity by plugging in new drives, notify me of drive errors, disk failure protection, dynamic space of "partitions", better/worse effective capacity, etc. Which is more secure? Am I able to simply replace a bad drive with a new one on unraid? What happens if my pc fails? Lets say the cpu overheats. Since I have a complete pc which is going to be replaced, I only have to pay the software to use unraid. I am going to use my nas for: music library (how well does it integrate with iTunes? ) picture library movie library development (i need to be able to be to use time machine) I am going to use this nas with a MacBook pro. My current disks: 2x 500Gb 1x 1.5Tb 1x 2Tb On a drobo fs I would have 2.26 Tb of space. What would it be on unraid? Is FreeNAS also an alternative?

  Read the article

• Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

  - by Jesse

  I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

  Read the article

• gpg symmetric encryption using pipes

  - by Thomas

  I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

  Read the article

• install Win7 SP1 with bcdedit failing

  - by Albert

  I'm getting the error 0x800F0A12 which is described here. bcdedit says: C:\>bcdedit.exe Der Speicher für die Startkonfigurationsdaten konnte nicht geöffnet werden. Das System kann die angegebene Datei nicht finden. (English: Couldn't open the start configuration. Couldn't find the file.) (off topic: how can I get those messages in English?) I played around and I assume that is because the system partition C:\ is not on the first BIOS disk. There are 4 disks in my PC. On one of them (shown as the 4th in Windows drive manager) contains Windows, whereby the system-reserved NTFS partition is the first primary and the second primary is my main Windows system partition. A few more partitions follow with other (non-NTFS) stuff. I was able to set the first two disks offline (via the Windows drive manager). For the 3rd disk, it says that it cannot set the BIOS 0 disk offline. How can I ignore that and still install SP1? I don't want to rewire/resetup my disks.

  Read the article

• Where to get grub files without using grub-install

  - by Jacky

  I am in a particular situation. I have a MacBook Pro with no internal CD drive and both MacOS X (minimal setup) and Linux (my main system) is installed. During a cross-upgrade to Ubuntu 12.04 I messed up grub, so that my /boot/grub directory is basically empty. This means I can't boot Linux on the laptop anymore but only get into grub rescue. Normally this is no issue as you'd just boot from a rescue CD or USB stick, but unfortunately with a MacBook Pro this is not possible (I have reFIT installed and it attempts to boot, but it fails and the manual says that Apple's EFI firmware is not able to handle this situation). From MacOS X, however, I still have write access to the Linux partition. I've now been trying to figure out how to populate the /boot/grub folder with the necessary files, to no avail so far. The ISO image of Ubuntu 12.04 contains an EFI folder which is not what I am looking for, instead I need the normal.mod files for the grub version of Ubuntu 12.04. I do not have any other machine to set up a virtual machine of Ubuntu 12.04 to extract this from after a grub-install, so I am asking for ideas here how to solve this mess. P.S.: I installed the Linux previously when I still had a working internal CD drive. This is gone now.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• vmdk Recovery after migration from 3.5 to 4 and fallback tentative.

  - by olgirard

  Hy, I've tryed to migrate some VM from my 3.5i environment to a brand new vSphere 4.0 U1. The two platforms are running simultaneously, sharing the same SAN. I Migrate my VM by stopping it, unregistering in vcenter (esx ver. 3.5, i call it esx3), register in vSphere (esx ver. 4, i call it esx4), and migrate upgrade virtual hardware before powering it up (First mistake). vMotion was enabled on esx4, seem to be a second mistake. After a day or so, i encountred problems joigning the esx server (esx4) and decided to unregister my server for esx4 and fallback to esx3. esx3 refused to boot, i supposed this was due to virtual hardware in Version 7 so i recreated a new VM pointing to the vmdk of the old VM. Everithing seemed fine until i log into the server and discover that i was running on the original disk ith every snapshots ignored even those created on esx3. I tried to reboot VM on esx4 but VM doesn't power up because "The parent virtual disk has been modified since the child was created". I've got a copy of a later state of the drive but generated between two snapshots (ovf generated with canverter standalone) as a backup. Do i have a chance to recover at least some files on the virtual drive or (as i tink) all is played, i've done enought mistakes for this time. Thanks for your help.

  Read the article

• Ubuntu Cannot change permissions on files I own and have RW to.

  - by madmaze

  Hello there, I have a harddrive full of backups which for me is mounted at /media/chronus_ I have been trying to give another user rw permission to this drive. The problem is that I cannot change any permissions on this drive, even if i make a new file it puts sets everything to -rw------- here is an excerpt of what i have tried: madmaze@the-gibson:~$ touch testfile madmaze@the-gibson:~$ ls -l testfile -rw-r--r-- 1 madmaze madmaze 0 2011-01-16 20:11 testfile madmaze@the-gibson:~$ chmod 777 testfile madmaze@the-gibson:~$ ls -l testfile -rwxrwxrwx 1 madmaze madmaze 0 2011-01-16 20:11 testfile madmaze@the-gibson:~$ cd /media/chronos_/Pix/ madmaze@the-gibson:/media/chronos_/Pix$ ls -l total 4100 -rw------- 1 madmaze madmaze 28226 2011-01-16 20:18 avp.jpg -rw------- 1 madmaze madmaze 5764 2011-01-16 20:18 avpsmall.jpg -rw------- 1 madmaze madmaze 98414 2011-01-16 20:18 john.jpg -rw------- 1 madmaze madmaze 98785 2011-01-16 20:18 lisa.jpg -rw------- 1 madmaze madmaze 3954281 2011-01-16 20:18 peter.jpg madmaze@the-gibson:/media/chronos_/Pix$ chmod 777 *.jpg madmaze@the-gibson:/media/chronos_/Pix$ ls -l total 4100 -rw------- 1 madmaze madmaze 28226 2011-01-16 20:18 avp.jpg -rw------- 1 madmaze madmaze 5764 2011-01-16 20:18 avpsmall.jpg -rw------- 1 madmaze madmaze 98414 2011-01-16 20:18 john.jpg -rw------- 1 madmaze madmaze 98785 2011-01-16 20:18 lisa.jpg -rw------- 1 madmaze madmaze 3954281 2011-01-16 20:18 peter.jpg madmaze@the-gibson:/media/chronos_/Pix$ sudo chmod 777 *.jpg madmaze@the-gibson:/media/chronos_/Pix$ ls -l total 4100 -rw------- 1 madmaze madmaze 28226 2011-01-16 20:18 avp.jpg -rw------- 1 madmaze madmaze 5764 2011-01-16 20:18 avpsmall.jpg -rw------- 1 madmaze madmaze 98414 2011-01-16 20:18 john.jpg -rw------- 1 madmaze madmaze 98785 2011-01-16 20:18 lisa.jpg -rw------- 1 madmaze madmaze 3954281 2011-01-16 20:18 peter.jpg madmaze@the-gibson:/media/chronos_/Pix$ touch testfile madmaze@the-gibson:/media/chronos_/Pix$ ls -l testfile -rw------- 1 madmaze madmaze 0 2011-01-16 20:25 testfile madmaze@the-gibson:/media/chronos_/Pix$ chmod 777 testfile madmaze@the-gibson:/media/chronos_/Pix$ ls -l testfile -rw------- 1 madmaze madmaze 0 2011-01-16 20:25 testfile madmaze@the-gibson:/media/chronos_/Pix$ Any Ideas what I could be doing wrongly?

  Read the article

• Disable XP disk check using FAT32

  - by mike xie

  Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

  Read the article

• Linux Uninstalling errors

  - by Zack

  I want to uninstall back-track 5 so I deleted the partitions for back-track os. After deleting the partition that used to be for back-track becomes free space as in picture. But I can't delete that partition nor creating a new partition. I used G-Parted from hiren boot cd but it says there is no partition table, you need to create a partition table. But actually I have 5 partitions already. And I thought of restarting might fix it. But after showing post screen my laptop show grub error. I don't know what to do, and I tried to install back-track again to fix the problem but it also says that i do not have any partitions. I can only boot windows by passing through hiren boot cd. But most of the time My computer is not recognizing the external dvd drive, nor the internal so i have to restart again and again, hoping to catch the time computer recognize the dvd drive. Can I change the boot loader to correct the grub error? SOLVED : I have solved the grub error by writing MBR again by using EasyBCD But I still have the format error.

  Read the article

• OpenWrt vs DDWrt

  - by Ioan Paul Pirau

  I have a TP-Link Wr1043ND router and I want to install one of these two firmwares: OpenWRT DD-WRT I read that I can install custom packages and do much more than I can with the original firmware. I would like to ask someone with experience in using both OpenWRT and DD-WRT which he would recommend and why. And to give a few reference points I'm interested in: reliability – network stability both on cable and wireless and on the usb drive performance – network speed, very important also usb drive speed configurability – the possibility to add extensions such as a torrent client, FTP, SSH, WWW and SVN server directly ease of use – the ease of installation and configuration of the router support/docs – how much info there is if you stumble upon a problem and you have to find some documentation, or if there's any free support (but that's a longshot) Of course I don't imagine that I will find the perfect firmware and that one is vastly superior over the other. Also if there's anyone out there who uses one of these firmwares on a TP-Link Wr1043ND, it would be great to get some feedback about the impact of the changes from the original firmware. P.S. I'm open also for Tomato if it's the better one.

  Read the article

• Automated Scanning for Corrupted Archive Files

  - by Synetech inc.

  Hi, I have all kinds of files that I have downloaded from everywhere over the years scattered around my hard drives. I’m in the process of trying to organize them all and have run into a problem. Sometimes a file was not downloaded correctly (this was a big issue when Chromium first came out) and is thus corrupt. For media files, this is relatively simple to determine (it requires actually opening and examining the file). For executables or other binaries, it is relatively difficult (executables may or may not crash, other binaries could be completely unknown). Archive files (eg zip, rar, 7z, exe, ace, etc.) however should be pretty simple, they have a built-in corruption detection facility. My problem now is that I really don’t want to open and test each and every single archived file throughout my drive; that would be a nightmare. I’m looking for a utility that can automate the process. Is there a program that can scan archive files on a drive and list the ones that are corrupt? Thanks a lot.

  Read the article

• `:Zone.Identifier` files keep on appearing in Windows XP virtual machine

  - by Jonathan Reno

  I have a Windows XP Home Edition guest and a Linux Mint 13 host. I use VirtualBox and the ~/Public directory is shared with the guest. It sometimes happens that I use IE on the guest system to download files (until I get a better Windows browser). All of the downloaded files go the the L:\ drive (the ~/Public directory). When they are finished downloading, Windows Explorer adds a :Zone.Identifier file for each file I download. When I extract a downloaded ZIP archive on the guest (on drive L:\), Windows creates a :Zone.Identifier file for every file in the extracted directory. This even occurs if I use the host to move a file to the ~/Public directory. The shared ~/Public directory is on an ext4 partition and the colon character is supposed to be illegal in file names in Windows, but not on the ext4 partition. Is there any way to stop Windows from putting all this rubbish on my filesystem? (I might have to create a shell script to clean up after Windows' act.) Here is what I see in Windows Explorer: By the way, if I were running a Mac OS X host (where colons are illegal file name characters) this would be even more horrendous.

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >