Search Results

Search found 10128 results on 406 pages for 'extended events'.

Page 251/406 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

  • USB drives not recognized all of a sudden (module usb_storage not loading)

    - by Siddharth
    I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • Using Open MQ as an Oracle CEP Event Source

    - by seth.white
    I helped an Oracle CEP customer recently who wanted to use Open MQ has an event source for their Oracle CEP application.  In this case, the Oracle CEP application was being used to provide monitoring for an electronic commerce website, however, the steps for configuring Open MQ are entirely independent of the application logic. I thought I would list the configuration steps in a blog post in case they might help others in the future. Note that although the Oracle CEP documentation states that only WebLogic and Tibco JMS are "officially" supported, any JMS implementation that provides a Java client should work with Oracle CEP. The first step is to add an adapter to the application's EPN. This can be done in the usual way, using the Eclipse IDE. The end result is something like the following bit of configuration in the application's Spring application context. Note that the provider attribute value of 'jms-inbound' specifies that the out-of-the-box JMS adapter is being used. <wlevs:adapter id="helloworldAdapter" provider="jms-inbound"> </wlevs:adapter>   Next, configure the inbound adapter so that it can connect to Open MQ in the Oracle CEP configuration file (config.xml). The snippet below provides an example of what this configuration should look like. The exact values specified for jndi-provider-url, jndi-factory, connection-jndi-name, destination-jndi-name elements will depend on your Open MQ configuration.  For example , if the name of your Open MQ topic destination is 'ElectronicCommerceTopic', then you would specify that as the destination-jndi-name.  The name of your Open MQ connection factory goes in the connection-jndi-name element. In my simple example, I also specify in event-type element so that the out-of-the-box JMS adapter will attempt to automatically convert incoming messages to events of type HelloWorldEvent. In a more complex application, one would configure a custom converter on the JMS adapter to convert from messages to events.  The Oracle CEP 11.1.3 documentation describes how to do this.   <jms-adapter> <name>helloworldAdapter</name> <event-type>HelloWorldEvent</event-type> <jndi-provider-url>file:///C:/Temp</jndi-provider-url> <jndi-factory>com.sun.jndi.fscontext.RefFSContextFactory</jndi-factory> <connection-jndi-name>YourJMSConnectionFactoryName</connection-jndi-name> <destination-jndi-name>YourJMSDestinationName</destination-jndi-name> </jms-adapter>   Finally, one needs to package the client-side Open MQ jars so that the classes that they contain are available to the Oracle CEP runtime. The recommended way for doing this in the Oracle CEP 11.1.3 release is to package the classes as a library module or simply place them in the application bundle.  The advantage of deploying the classes as a library module is that they are available to any application that wants to connect to Open MQ. In my case, I packaged the classes in my application bundle. A best practice when you want to include additional jars in your application bundle is to create a 'lib' directory in your Eclipse project and then copy the required jars into that directory.  Then, use the support that Eclipse provides to add the jars to the bundle classpath (which makes the classes part of your application in the same way that regular application classes are), and export all of the classes from your application bundle so that they are available to the Oracle CEP server runtime.  The screenshot below Illustrates how this is done in Eclipse.  The bundle classpath contains two Open MQ jars and all packages in the jars are exported.     Finally, import the javax.jms and javax.naming packages into the application module as these are needed by the Open MQ classes. The screenshot below shows the complete list of package imports for my sample application.       Once you have completed these steps, you should be able to build and deploy your application and begin receiving inbound messages from Open MQ. Technorati Tags: CEP,JMS,Adapter,Open MQ,Eclipse .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 }

    Read the article

  • Summit Time!

    - by Ajarn Mark Caldwell
    Boy, how time flies!  I can hardly believe that the 2011 PASS Summit is just one week away.  Maybe it snuck up on me because it’s a few weeks earlier than last year.  Whatever the cause, I am really looking forward to next week.  The PASS Summit is the largest SQL Server conference in the world and a fantastic networking opportunity thrown in for no additional charge.  Here are a few thoughts to help you maximize the week. Networking As Karen Lopez (blog | @DataChick) mentioned in her presentation for the Professional Development Virtual Chapter just a couple of weeks ago, “Don’t wait until you need a new job to start networking.”  You should always be working on your professional network.  Some people, especially technical-minded people, get confused by the term networking.  The first image that used to pop into my head was the image of some guy standing, awkwardly, off to the side of a cocktail party, trying to shmooze those around him.  That’s not what I’m talking about.  If you’re good at that sort of thing, and you can strike up a conversation with some stranger and learn all about them in 5 minutes, and walk away with your next business deal all but approved by the lawyers, then congratulations.  But if you’re not, and most of us are not, I have two suggestions for you.  First, register for Don Gabor’s 2-hour session on Tuesday at the Summit called Networking to Build Business Contacts.  Don is a master at small talk, and at teaching others, and in just those two short hours will help you with important tips about breaking the ice, remembering names, and smooth transitions into and out of conversations.  Then go put that great training to work right away at the Tuesday night Welcome Reception and meet some new people; which is really my second suggestion…just meet a few new people.  You see, “networking” is about meeting new people and being friendly without trying to “work it” to get something out of the relationship at this point.  In fact, Don will tell you that a better way to build the connection with someone is to look for some way that you can help them, not how they can help you. There are a ton of opportunities as long as you follow this one key point: Don’t stay in your hotel!  At the least, get out and go to the free events such as the Tuesday night Welcome Reception, the Wednesday night Exhibitor Reception, and the Thursday night Community Appreciation Party.  All three of these are perfect opportunities to meet other professionals with a similar job or interest as you, and you never know how that may help you out in the future.  Maybe you just meet someone to say HI to at breakfast the next day instead of eating alone.  Or maybe you cross paths several times throughout the Summit and compare notes on different sessions you attended.  And you just might make new friends that you look forward to seeing year after year at the Summit.  Who knows, it might even turn out that you have some specific experience that will help out that other person a few months’ from now when they run into the same challenge that you just overcame, or vice-versa.  But the point is, if you don’t get out and meet people, you’ll never have the chance for anything else to happen in the future. One more tip for shy attendees of the Summit…if you can’t bring yourself to strike up conversation with strangers at these events, then at the least, after you sit through a good session that helps you out, go up to the speaker and introduce yourself and thank them for taking the time and effort to put together their presentation.  Ideally, when you do this, tell them WHY it was beneficial to you (e.g. “Now I have a new idea of how to tackle a problem back at the office.”)  I know you think the speakers are all full of confidence and are always receiving a ton of accolades and applause, but you’re wrong.  Most of them will be very happy to hear first-hand that all the work they put into getting ready for their presentation is paying off for somebody. Training With over 170 technical sessions at the Summit, training is what it’s all about, and the training is fantastic!  Of course there are the big-name trainers like Paul Randall, Kimberly Tripp, Kalen Delaney, Itzik Ben-Gan and several others, but I am always impressed by the quality of the training put on by so many other “regular” members of the SQL Server community.  It is amazing how you don’t have to be a published author or otherwise recognized as an “expert” in an area in order to make a big impact on others just by sharing your personal experience and lessons learned.  I would rather hear the story of, and lessons learned from, “some guy or gal” who has actually been through an issue and came out the other side, than I would a trained professor who is speaking just from theory or an intellectual understanding of a topic. In addition to the three full days of regular sessions, there are also two days of pre-conference intensive training available.  There is an extra cost to this, but it is a fantastic opportunity.  Think about it…you’re already coming to this area for training, so why not extend your stay a little bit and get some in-depth training on a particular topic or two?  I did this for the first time last year.  I attended one day of extra training and it was well worth the time and money.  One of the best reasons for it is that I am extremely busy at home with my regular job and family, that it was hard to carve out the time to learn about the topic on my own.  It worked out so well last year that I am doubling up and doing two days or “pre-cons” this year. And then there are the DVDs.  I think these are another great option.  I used the online schedule builder to get ready and have an idea of which sessions I want to attend and when they are (much better than trying to figure this out at the last minute every day).  But the problem that I have run into (seems this happens every year) is that nearly every session block has two different sessions that I would like to attend.  And some of them have three!  ACK!  That won’t work!  What is a guy supposed to do?  Well, one option is to purchase the DVDs which are recordings of the audio and projected images from each session so you can continue to attend sessions long after the Summit is officially over.  Yes, many (possibly all) of these also get posted online and attendees can access those for no extra charge, but those are not necessarily all available as quickly as the DVD recording are, and the DVDs are often more convenient than downloading, especially if you want to share the training with someone who was not able to attend in person. Remember, I don’t make any money or get any other benefit if you buy the DVDs or from anything else that I have recommended here.  These are just my own thoughts, trying to help out based on my experiences from the 8 or so Summits I have attended.  There is nothing like the Summit.  It is an awesome experience, fantastic training, and a whole lot of fun which is just compounded if you’ll take advantage of the first part of this article and make some new friends along the way.

    Read the article

  • Security Controls on data for P6 Analytics

    - by Jeffrey McDaniel
    The Star database and P6 Analytics calculates security based on P6 security using OBS, global, project, cost, and resource security considerations. If there is some concern that users are not seeing expected data in P6 Analytics here are some areas to review: 1. Determining if a user has cost security is based on the Project level security privileges - either View Project Costs/Financials or Edit EPS Financials. If expecting to see costs make sure one of these permissions are allocated.  2. User must have OBS access on a Project. Not WBS level. WBS level security is not supported. Make sure user has OBS on project level.  3. Resource Access is determined by what is granted in P6. Verify the resource access granted to this user in P6. Resource security is hierarchical. Project access will override Resource access based on the way security policies are applied. 4. Module access must be given to a P6 user for that user to come over into Star/P6 Analytics. For earlier version of RDB there was a report_user_flag on the Users table. This flag field is no longer used after P6 Reporting Database 2.1. 5. For P6 Reporting Database versions 2.2 and higher, the Extended Schema Security service must be run to calculate all security. Any changes to privileges or security this service must be rerun before any ETL. 6. In P6 Analytics 2.0 or higher, a Weblogic user must exist that matches the P6 username. For example user Tim must exist in P6 and Weblogic users for Tim to be able to log into P6 Analytics and access data based on  P6 security.  In earlier versions the username needed to exist in RPD. 7. Cache in OBI is another area that can sometimes make it seem a user isn't seeing the data they expect. While cache can be beneficial for performance in OBI. If the data is outdated it can retrieve older, stale data. Clearing or turning off cache when rerunning a query can determine if the returned result set was from cache or from the database.

    Read the article

  • Desktop Fun: Happy New Year Icon and Font Packs

    - by Asian Angel
    With the Christmas holiday so near, New Year’s Eve and Day will not be far behind. To help you prepare those New Year’s Eve and Day celebrations we have put together a nice collection of fonts for party invitations, fliers, decorations, and more. We also have icon goodness to make your desktop all bright and shiny for the new year. Sneak Preview This is the New Year’s desktop that we put together using the Birthday Icon Set shown below. Note: The original unmodified version of this wallpaper can be found here. An up close look at the icons that we used… The Icon Packs Note: To customize the icon setup on your Windows 7 & Vista systems see our article here. Using Windows XP? We have you covered here. New Year Celebration Icon Set *.ico format only Download New Year Party Icon *.ico, .png, and .icns format Note: This icon is available for download in single file format (based on format type and/or image size). Download Celebration *.ico format only Download Birthday *.ico, .png, and .icns format Special Note: While not an official New Year’s set of icons, it will still work nicely for a New Year’s or celebration desktop setup. Download The Font Packs Note: To manage the fonts on your Windows 7, Vista, & XP systems see our article here. Cocktail Bubbly Download Fontdinerdotcom Sparkly Download Confetti Download KR Happy New Year 2002 Note: For those who are curious about this font’s shape, it is a cork popping out of a champagne bottle. Download NewYearBats *includes 52 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Download LCR Party Dings *includes 26 individual characters (A – Z), not case sensitive Special Note: This font is an all-purpose type that covers a variety of party/celebration types from New Year’s to birthdays. Download For more great ways to customize your computer be certain to look through our Desktop Fun section. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Track Weather Conditions with the Weather Underground Web App for Chrome These 8-Bit Mario Wood Magnets Put Video Games on Your Fridge Christmas Themes 4 Pack for Chrome and Iron Browser Enjoy the First Total Lunar Eclipse in 372 Years This Evening Gmail’s Free Calling Extended Through 2011 Voice Search Brings Android-Style Voice Search to Google Chrome

    Read the article

  • USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

    - by Siddharth
    I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • WinMo&rsquo;s Demise: Notifying Next of &ldquo;Kin&rdquo;

    - by andrewbrust
    This past Monday, April 12th, Visual Studio 2010 was launched.  And on that same day, Microsoft also launched a new line of  mobile phone handsets, called Kin.  The two product launches are actually connected, but only by what they do not have in common, and what they commonly lack. On the former point: VS 2010 had released to manufacturing a couple weeks prior to its launch.  The Kin phones, meanwhile are not yet available.  We don’t even know what they will cost.  (And I think cost will be a major factor in Kin’s success…I told ChannelWeb’s Yara Souza so in this article). What do the two products both lack? Simple: Windows Mobile 6.x. For example, Kin seems to be based on the same platform as Windows Phone 7 (albeit a subset).  And VS 2010 does not support .NET Compact Framework development, which means no .NET development support for WinMo 6.x and earlier. So I guess April 12th marks Windows Phone “clean slate day.”  If you want to develop for the old phone platform, you will need to use the old version of Visual Studio (i.e. 2008).  Luckily VS 2010 and 2008 can be installed side-by-side.  But I doubt that’s much consolation to developers who still target WinMo 6.5 and earlier. Remember, WinMo isn’t just about the phone.  There are all sorts of non-telephony mobile devices, including ruggedized Pocket PC-style instruments, bar code readers and shop-floor-deployed units that don’t run Windows Phone 7 and couldn’t, even if they wanted to. Where will developers in these markets go?  I would guess some will stick with WinMo 6.x and earlier, until Windows Phone 7 can handle their workloads, assuming that does indeed happen.  Others will likely go to Google’s Android platform. For OEMs and developers who need a customizable mobile software stack, Android is turning out to be out-WinMo-ing WinMo.  As I wrote in this post, Google took Microsoft’s model (minus the licensing fees) and combined it with a modern SmartPhone feature set (rather than a late 90s/early oughts PDA paradigm), to great success.  You might say Google embraced and extended. You might also say Microsoft shunned and withdrew.

    Read the article

  • Tellago releases a RESTful API for BizTalk Server business rules

    - by Charles Young
    Jesus Rodriguez has blogged recently on Tellago Devlabs' release of an open source RESTful API for BizTalk Server Business Rules.   This is an excellent addition to the BizTalk ecosystem and I congratulate Tellago on their work.   See http://weblogs.asp.net/gsusx/archive/2011/02/08/tellago-devlabs-a-restful-api-for-biztalk-server-business-rules.aspx   The Microsoft BRE was originally designed to be used as an embedded library in .NET applications. This is reflected in the implementation of the Rules Engine Update (REU) Service which is a TCP/IP service that is hosted by a Windows service running locally on each BizTalk box. The job of the REU is to distribute rules, managed and held in a central database repository, across the various servers in a BizTalk group.   The engine is therefore distributed on each box, rather than exploited behind a central rules service.   This model is all very well, but proves quite restrictive in enterprise environments. The problem is that the BRE can only run legally on licensed BizTalk boxes. Increasingly we need to deliver rules capabilities across a more widely distributed environment. For example, in the project I am working on currently, we need to surface decisioning capabilities for use within WF workflow services running under AppFabric on non-BTS boxes. The BRE does not, currently, offer any centralised rule service facilities out of the box, and hence you have to roll your own (and then run your rules services on BTS boxes which has raised a few eyebrows on my current project, as all other WCF services run on a dedicated server farm ).   Tellago's API addresses this by providing a RESTful API for querying the rules repository and executing rule sets against XML passed in the request payload. As Jesus points out in his post, using a RESTful approach hugely increases the reach of BRE-based decisioning, allowing simple invocation from code written in dynamic languages, mobile devices, etc.   We developed our own SOAP-based general-purpose rules service to handle scenarios such as the one we face on my current project. SOAP is arguably better suited to enterprise service bus environments (please don't 'flame' me - I refuse to engage in the RESTFul vs. SOAP war). For example, on my current project we use claims based authorisation across the entire service bus and use WIF and WS-Federation for this purpose.   We have extended this to the rules service. I can't release the code for commercial reasons :-( but this approach allows us to legally extend the reach of BRE far beyond the confines of the BizTalk boxes on which it runs and to provide general purpose decisioning capabilities on the bus.   So, well done Tellago.   I haven't had a chance to play with the API yet, but am looking forward to doing so.

    Read the article

  • How to Never Use iTunes With Your iPhone, iPad, or iPod Touch

    - by Chris Hoffman
    iTunes isn’t an amazing program on Windows. There was a time when Apple device users had to plug their devices into their PCs or Macs and use iTunes for device activation, updates, and syncing, but iTunes is no longer necessary. Apple still allows you to use iTunes for these things, but you don’t have to. Your iOS device can function independently from iTunes, so you should never be forced to plug it into a PC or Mac. Device Activation When the iPad first came out, it was touted as a device that could replace full PCs and Macs for people who only needed to perform light computing tasks. Yet, to set up a new iPad, users had to plug it into a PC or Mac running iTunes and use iTunes to activate the device. This is no longer necessary. With new iPads, iPhones, and iPod Touches, you can simply go through the setup process after turning on your new device without ever having to plug it into iTunes. Just connect to a Wi-Fi or cellular data network and log in with your Apple ID when prompted. You’ll still see an option that allows you to activate the device via iTunes, but this should only be necessary if you don’t have a wireless Internet connection available for your device. Operating System Updates You no longer have to use Apple’s iTunes software to update to a new version of Apple’s iOS operating system, either. Just open the Settings app on your device, select the General category, and tap Software Update. You’ll be able to update right from your device without ever opening iTunes. Purchased iTunes Media Apple allows you to easily access content you’ve purchased from the iTunes Store on any device. You don’t have to connect your device to your computer and sync via iTunes. For example, you can purchase a movie from the iTunes Store. Then, without any syncing, you can open the iTunes Store app on any of your iOS devices, tap the Purchased section, and see stuff you’ve downloaded. You can download the content right from the store to your device. This also works for apps — apps you purchase from the App Store can be accessed in the Purchased section on the App Store on your device later. You don’t have to sync apps from iTunes to your device, although iTunes still allows you to. You can even set up automatic downloads from the iTunes & App Store settings screen. This would allow you to purchase content on one device and have it automatically download to your other devices without any hassle. Music Apple allows you to re-download purchased music from the iTunes Store in the same way. However, there’s a good chance you have your own music you didn’t purchase from iTunes. Maybe you spent time ripping it all from your old CDs and you’ve been syncing it to your devices via iTunes ever since. Apple’s solution for this is named iTunes Match. This feature isn’t free, but it’s not a bad deal at all. For $25 per year, Apple allows you to upload all your music to your iCloud account. You can then access all your music from any iPhone, IPad, or iPod Touch. You can stream all your music — perfect if you have a huge library and little storage on your device — and choose which songs you want to download to your device for offline use. When you add additional music to your computer, iTunes will notice it and upload it using iTunes Match, making it available for streaming and downloading directly from your iOS devices without any syncing. This feature is named iTunes Match because it doesn’t just upload music — if Apple already has a song you upload, it will “match” your song with Apple’s copy. This means you may get higher-quality versions of your songs if you ripped them from CD at a lower bitrate. Podcasts You don’t have to use iTunes to subscribe to podcasts and sync them to your devices. Even if you have a lowly iPod Touch, you can install APple’s Podcasts app from the app store. Use it to subscribe to podcasts and configure them to automatically download directly to your device. You can use other podcast apps for this, too. Backups You can continue backing up your device’s data through iTunes, generating local backups that are stored on your computer. However, new iOS devices are configured to automatically back up their data to iCloud. This happens automatically in the background without you even having to think about it, and you can restore such backups when setting up a device simply by logging in with your Apple ID. Personal Data In the days of PalmPilots, people would use desktop programs like iTunes to sync their email, contacts, and calendar events with their mobile devices. You probably shouldn’t have to sync this data form your computer. Just sign into your email account — for example, a Gmail account — on your device and iOS will automatically pull your email, contacts, and calendar events from your associated account. Photos Rather than connecting your iOS device to your computer and syncing photos from it, you can use an app that automatically uploads your photos to a web service. Dropbox, Google+, and even Flickr all have this feature in their apps. You’ll be able to access your photos from any computer and have a backup copy without any syncing required. You may still need to use iTunes if you want to sync local music without paying for iTunes Match or copy local video files to your device. Copying large local files over is the only real scenario where you’d need iTunes. If you don’t need to copy such files over, you can go ahead and uninstall iTunes from your Windows PC if you like. You shouldn’t need it.     

    Read the article

  • Hello From South Florida

    - by Sam Abraham
    Fellow Blog Readers: I figured I use my first blog post on GeeksWithBlogs to introduce myself.   I recently relocated from Long Island, NY to South Florida where I joined a local company as Software Engineer specializing in technologies such as C#, ASP.Net 3.5, WCF, Silverlight, SQL Server 2008 and LINQ, to name a few. I am an MCP and MCTS ASP.Net 3.5, looking to get my .Net 4.0 certification soon.   Having been in industry for a few years so far, I figured I would share with you my take on the importance of being involved(at least attending) in local user groups.   I am a firm believer that besides using a certain technology, the best way to expand one’s knowledge is by sharing it with others and being equally open to learn from others just as much as you are willing to share what you know.   In my opinion, an important factor that makes a good developer stand-out is his/her ability to keep abreast with the latest and greatest even in areas outside his/her direct expertise.   Additionally, having spoken to various recruiters, technical user group attendees are always favorably looked upon as genuinely interested in their field and willing to take the initiative to expand their knowledge which offers job candidates good leverage when competing for jobs.   I believe I am very blessed to be in an area with a very strong and vibrant developer community. I found in the local .Net community leadership a genuine interest in constantly extending the opportunity to all developers to get more involved and encouraging those who are willing to take that initiative achieve their goal: Speak in meetings, volunteer at events or write and publish articles/blogs about latest and greatest technologies.   With Vishal Shukla (Site director for the West Palm Beach .Net User Group) traveling overseas, I have been extended the opportunity to come on board as site coordinator for FladotNet's WPB .Net User Group along with Venkata Subramanian, an opportunity which I gratefully accepted.   Being involved in running a .Net User Group will surely help me personally and professionally, but my real hope is to use this opportunity to assist in delivering the ultimate common-goal: spread the word about new .Net Technologies, help everybody get more involved and simply have fun learning new things.   With my introduction out of the way, in the next few days I will be posting some notes on an upcoming talk I will be giving about MVC2 and VS2010 in mid-April.   Environment.Exit(0); --Sam

    Read the article

  • Can I safely delete the Ubuntu 12.04 partition and use the unallocated space for my Elementary OS?

    - by d4ryl3
    I have this setup: I've decided to switch to Elementary OS Luna (fork of Ubuntu 12.04) as my main Linux distro. Now I need to delete my Ubuntu partition so I could add capacity to my eOS which only has 10Gb. Currently my eOS is in /dev/sda9, and Ubuntu in /dev/sda8/. I forgot where my bootloader is installed, so I ran bootinfoscript, which returned this: `============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 94 for . sda1: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 851823520 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Boot files: /grub/grub.cfg /extlinux/extlinux.conf sda8: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda8 and looks at sector 860224256 of the same hard drive for core.img. core.img is at this location and looks for (,msdos9)/boot/grub on this drive. Operating System: Ubuntu 13.04 Boot files: /etc/fstab sda9: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: elementary OS Luna Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img` I need advice as to how to proceed. I mean, could I simply delete /dev/sda7/ and /dev/sda8/? Please help, thank you.

    Read the article

  • Patterns for Handling Changing Property Sets in C++

    - by Bhargav Bhat
    I have a bunch "Property Sets" (which are simple structs containing POD members). I'd like to modify these property sets (eg: add a new member) at run time so that the definition of the property sets can be externalized and the code itself can be re-used with multiple versions/types of property sets with minimal/no changes. For example, a property set could look like this: struct PropSetA { bool activeFlag; int processingCount; /* snip few other such fields*/ }; But instead of setting its definition in stone at compile time, I'd like to create it dynamically at run time. Something like: class PropSet propSetA; propSetA("activeFlag",true); //overloading the function call operator propSetA("processingCount",0); And the code dependent on the property sets (possibly in some other library) will use the data like so: bool actvFlag = propSet["activeFlag"]; if(actvFlag == true) { //Do Stuff } The current implementation behind all of this is as follows: class PropValue { public: // Variant like class for holding multiple data-types // overloaded Conversion operator. Eg: operator bool() { return (baseType == BOOLEAN) ? this->ToBoolean() : false; } // And a method to create PropValues various base datatypes static FromBool(bool baseValue); }; class PropSet { public: // overloaded[] operator for adding properties void operator()(std::string propName, bool propVal) { propMap.insert(std::make_pair(propName, PropVal::FromBool(propVal))); } protected: // the property map std::map<std::string, PropValue> propMap; }; This problem at hand is similar to this question on SO and the current approach (described above) is based on this answer. But as noted over at SO this is more of a hack than a proper solution. The fundamental issues that I have with this approach are as follows: Extending this for supporting new types will require significant code change. At the bare minimum overloaded operators need to be extended to support the new type. Supporting complex properties (eg: struct containing struct) is tricky. Supporting a reference mechanism (needed for an optimization of not duplicating identical property sets) is tricky. This also applies to supporting pointers and multi-dimensional arrays in general. Are there any known patterns for dealing with this scenario? Essentially, I'm looking for the equivalent of the visitor pattern, but for extending class properties rather than methods. Edit: Modified problem statement for clarity and added some more code from current implementation.

    Read the article

  • ArchBeat Top 10 for November 18-24, 2012

    - by Bob Rhubart
    The Top 10 most popular items shared on the OTN ArchBeat Facebook page for the week of November 18-24, 2012. One-Stop Shop for over 200 On-Demand Oracle Webcasts Webcasts can be a great way to get information about Oracle products without having to go cross-eyed reading yet another document off your computer screen. Oracle's new Webcast Center offers selectable filtering to make it easy to get to the information you want. Yes, you have to register to gain access, but that process is quick, and with over 200 webcasts to choose from you know you'll find useful content. Oracle SOA Suite 11g PS 5 introduces BPEL with conditional correlation for aggregation scenarios | Lucas Jellema An extensive, detailed technical post from Oracle ACE Director Lucas Jellema. Oracle Utilities Application Framework V4.2.0.0.0 Released | Anthony Shorten Principal Product Manager Anthony Shorten shares an overview of the changes implemented in the new release. Fault Handling and Prevention - Part 1 | Guido Schmutz and Ronald van Luttikhuizen In this technical article, part one of a four part series, Oracle ACE Directors Guido Schmutz and Ronald van Luttikhuizen guide you through an introduction to fault handling in a service-oriented environment using Oracle SOA Suite and Oracle Service Bus. Oracle BPM Process Accelerators and process excellence | Andrew Richards "Process Accelerators are ready-to-deploy solutions based on best practices to simplify process management requirements," says Capgemini's Andrew Richards. "They are considered to be 'product grade,' meaning they have been designed; engineered, documented and tested by Oracle themselves to a level that they can be deployed as-is for a solution to a problem or extended as appropriate for a particular scenario." Videos: Getting Started with Java Embedded | The Java Source Interested in Java Embedded? You'll want to check out these videos provided Tori Weildt, including interviews with Oracle's James Allen and Kevin Smith, recorded at ARM TechCon. JPA SQL and Fetching tuning ( EclipseLink ) | Edwin Biemond Oracle ACE Edwin Biemond's post illustrates how to "use the department and employee entity of the HR Oracle demo schema to explain the JPA options you have to control the SQL statements and the JPA relation Fetching." Devoxx 2012 Trip Report - clouds and sunshine | Markus Eisele Oracle ACE Director Markus Eisele shares an extensive and entertaining account of his experience at Devoxx 2012. Towards Ultra-Reusability for ADF - Adaptive Bindings | Duncan Mills "The task flow mechanism embodies one of the key value propositions of the ADF Framework," says Duncan Mills. "However, what if we could do more? How could we make task flows even more re-usable than they are today?" As you might expect, Duncan has answers for those questions. Java Specification Requests in Numbers | Markus Eisele Oracle ACE Director Markus Eisele shares some interesting data culled from the Java Community Process site. Thought for the Day "You can't have great software without a great team, and most software teams behave like dysfunctional families." — Jim McCarthy Source: SoftwareQuotes.com

    Read the article

  • ADF Code Guidelines

    - by Chris Muir
    During Oracle Open World 2012 the ADF Product Management team announced a new OTN website, the ADF Architecture Square.  While OOW represents a great opportunity to let customers know about new and exciting developments, the problem with making announcements during OOW however is customers are bombarded with so many messages that it's easy to miss something important. So in this blog post I'd like to highlight as part of the ADF Architecture Square website, one of the initial core offerings is a new document entitled ADF Code Guidelines. Now the title of this document should hopefully make it obvious what the document contains, but what's the purpose of the document, why did Oracle create it? Personally having worked as an ADF consultant before joining Oracle, one thing I noted amongst ADF customers who had successfully deployed production systems, that they all approached software development in a professional and engineered way, and all of these customers had their own guideline documents on ADF best practices, conventions and recommendations.  These documents designed to be consumed by their own staff to ensure ADF applications were "built right", typically sourced their guidelines from their team's own expert learnings, and the huge amount of ADF technical collateral that is publicly available.  Maybe from manuals and whitepapers, presentations and blog posts, some written by Oracle and some written by independent sources. Now this is all good and well for the teams that have gone through this effort, gathering all the information and putting it into structured documents, kudos to them.  But for new customers who want to break into the ADF space, who have project pressures to deliver ADF solutions without necessarily working on assembling best practices, creating such a document is understandably (regrettably?) a low priority.  So in recognising this hurdle, at Oracle we've devised the ADF Code Guidelines.  This document sets out ADF code guidelines, practices and conventions for applications built using ADF Business Components and ADF Faces Rich Client (release 11g and greater).  The guidelines are summarized from a number of Oracle documents and other 3rd party collateral, with the goal of giving developers and development teams a short circuit on producing their own best practices collateral. The document is not a final production, but a living document that will be extended to cover new information as discovered or as the ADF framework changes. Readers are encouraged to discuss the guidelines on the ADF EMG and provide constructive feedback to me (Chris Muir) via the ADF EMG Issue Tracker. We hope you'll find the ADF Code Guidelines useful and look forward to providing updates in the near future. Image courtesy of paytai / FreeDigitalPhotos.net

    Read the article

  • Communities - The importance of exchange and discussion

    Communication with your environment is an essential part of everyone's life. And it doesn't matter whether you are actually living in a rural area in the middle of nowhere, within the pulsating heart of a big city, or in my case on a wonderful island in the Indian Ocean. The ability to exchange your thoughts, your experience and your worries with another person helps you to get different points of view and new ideas on how to resolve an issue you might be confronted with. Benefits of community work What happens to be common sense in your daily life, also applies to your work environment. Working in IT, or ICT as it is called in Mauritius, requires a lot of reading and learning. Not only during your lectures at the university but with your colleagues in a project assignment and hopefully with 'unknown' pals in the universe of online communities. At least I can say that I learned quite a lot from other developers code, their responses in various forums, their numerous blog articles, and while attending local user group meetings. When I started to work as a professional software developer (or engineer some may say) years ago I immediately checked the existence of communities on the programming language, the database technology and other vital information on software development in general. Luckily, it wasn't too difficult to find. My employer had a subscription of the monthly magazines and newsletters of a national organisation which also run the biggest forum in that area. Getting in touch with other developers and reading their common problems but also solutions was a huge benefit to my growth. Image courtesy of Michael Kappel (CC BY-NC 2.0) Active participation and regular contribution to this community gave me some nice advantages, too. Within three years I was listed as a conference speaker at the annual developer's conference and provided several sessions on different topics during consecutive years. Back in 2004, I took over the responsibility and management of the monthly meetings of a regional user group, and organised it for more than two years. Furthermore, I was invited to the newly-founded community program of Microsoft Germany (Community Leader/Insider Program - CLIP). My website on Active FoxPro Pages was nominated in the second batch of online communities. Due to my community work and providing advice to others, I had the honour to be awarded as Microsoft Most Valuable Professional (MVP) - Visual Developer for Visual FoxPro in the years 2006 and 2007. It was a great experience to meet with other like-minded people and I'm really grateful for that. Just in case, more details are listed in my Curriculum Vitae. But this all changed when I moved to Mauritius... Cyber island Mauritius? During the first months in Mauritius I was way too busy to think about community activities at all. First of all, there was the new company that had to be set up, the new staff had to be trained and of course the communication work-flows and so on with the project managers back in Germany had to be sorted out, too. Second, I had to get a grip of my private matters like getting the basics for my new household or exploring the neighbourhood, and last but not least I needed a break from the hectic and intensive work prior to my departure. As soon as the sea literally calmed down, I started to have conversations with my colleagues about communities and user groups. Sadly, it turned out that there were none, or at least no one was aware of any at that time. Oh oh, what did I do? Anyway, having this kind of background and very positive experience with off-line and on-line activities I decided for myself that some day I'm going to found a community in Mauritius for all kind of IT/ICT-related fields. The main focus might be on software development but not on a certain technology or methodology. It was clear to me that it should be an open infrastructure and anyone is welcome to join, to experience, to share and to contribute if they would like to. That was the idea at that time... Ok, fast-forward to recent events. At the end of October 2012 I was invited to an event called Open Days organised by Microsoft Indian Ocean Islands together with other local partners and resellers. There I got in touch with local Technical Evangelist Arnaud Meslier and we had a good conversation on communities during the breaks. Eventually, I left a good impression on him, as we are having chats on Facebook or Skype irregularly. Well, seeing that my personal and professional surroundings have been settled and running smooth, having that great exchange and contact with Microsoft IOI (again), and being really eager to re-animate my intentions from 2007, I recently founded a new community: Mauritius Software Craftsmanship Community - #MSCC It took me a while to settle down with the name but it was obvious that the community should not be attached to one single technology, like ie. .NET user group, Oracle developers, or Joomla friends (these are fictitious names). There are several other reasons why I came up with 'Craftsmanship' as the core topic of this community. The expression of 'engineering' didn't feel right with the fields covered. Software development in all kind of facets is a craft, and therefore demands a lot of practice but also guidance from more experienced developers. It also includes the process of designing, modelling and drafting the ideas. Has to deal with various types of tests and test methodologies, and of course should be focused on flexible and agile ways of acting. In order to meet and to excel a customer's request for a solution. Next, I was looking for an easy way to handle the organisation of events and meeting appointments. Using all kind of social media platforms like Google+, LinkedIn, Facebook, Xing, etc. I was never really confident about their features of event handling. More by chance I stumbled upon Meetup.com and in combination with the other entities (G+ Communities, FB Pages or in Groups) I am looking forward to advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there will be a Trello workspace to collect and share ideas and provide downloads of slides, etc. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians!

    Read the article

  • The Sensemaking Spectrum for Business Analytics: Translating from Data to Business Through Analysis

    - by Joe Lamantia
    One of the most compelling outcomes of our strategic research efforts over the past several years is a growing vocabulary that articulates our cumulative understanding of the deep structure of the domains of discovery and business analytics. Modes are one example of the deep structure we’ve found.  After looking at discovery activities across a very wide range of industries, question types, business needs, and problem solving approaches, we've identified distinct and recurring kinds of sensemaking activity, independent of context.  We label these activities Modes: Explore, compare, and comprehend are three of the nine recognizable modes.  Modes describe *how* people go about realizing insights.  (Read more about the programmatic research and formal academic grounding and discussion of the modes here: https://www.researchgate.net/publication/235971352_A_Taxonomy_of_Enterprise_Search_and_Discovery) By analogy to languages, modes are the 'verbs' of discovery activity.  When applied to the practical questions of product strategy and development, the modes of discovery allow one to identify what kinds of analytical activity a product, platform, or solution needs to support across a spread of usage scenarios, and then make concrete and well-informed decisions about every aspect of the solution, from high-level capabilities, to which specific types of information visualizations better enable these scenarios for the types of data users will analyze. The modes are a powerful generative tool for product making, but if you've spent time with young children, or had a really bad hangover (or both at the same time...), you understand the difficult of communicating using only verbs.  So I'm happy to share that we've found traction on another facet of the deep structure of discovery and business analytics.  Continuing the language analogy, we've identified some of the ‘nouns’ in the language of discovery: specifically, the consistently recurring aspects of a business that people are looking for insight into.  We call these discovery Subjects, since they identify *what* people focus on during discovery efforts, rather than *how* they go about discovery as with the Modes. Defining the collection of Subjects people repeatedly focus on allows us to understand and articulate sense making needs and activity in more specific, consistent, and complete fashion.  In combination with the Modes, we can use Subjects to concretely identify and define scenarios that describe people’s analytical needs and goals.  For example, a scenario such as ‘Explore [a Mode] the attrition rates [a Measure, one type of Subject] of our largest customers [Entities, another type of Subject] clearly captures the nature of the activity — exploration of trends vs. deep analysis of underlying factors — and the central focus — attrition rates for customers above a certain set of size criteria — from which follow many of the specifics needed to address this scenario in terms of data, analytical tools, and methods. We can also use Subjects to translate effectively between the different perspectives that shape discovery efforts, reducing ambiguity and increasing impact on both sides the perspective divide.  For example, from the language of business, which often motivates analytical work by asking questions in business terms, to the perspective of analysis.  The question posed to a Data Scientist or analyst may be something like “Why are sales of our new kinds of potato chips to our largest customers fluctuating unexpectedly this year?” or “Where can innovate, by expanding our product portfolio to meet unmet needs?”.  Analysts translate questions and beliefs like these into one or more empirical discovery efforts that more formally and granularly indicate the plan, methods, tools, and desired outcomes of analysis.  From the perspective of analysis this second question might become, “Which customer needs of type ‘A', identified and measured in terms of ‘B’, that are not directly or indirectly addressed by any of our current products, offer 'X' potential for ‘Y' positive return on the investment ‘Z' required to launch a new offering, in time frame ‘W’?  And how do these compare to each other?”.  Translation also happens from the perspective of analysis to the perspective of data; in terms of availability, quality, completeness, format, volume, etc. By implication, we are proposing that most working organizations — small and large, for profit and non-profit, domestic and international, and in the majority of industries — can be described for analytical purposes using this collection of Subjects.  This is a bold claim, but simplified articulation of complexity is one of the primary goals of sensemaking frameworks such as this one.  (And, yes, this is in fact a framework for making sense of sensemaking as a category of activity - but we’re not considering the recursive aspects of this exercise at the moment.) Compellingly, we can place the collection of subjects on a single continuum — we call it the Sensemaking Spectrum — that simply and coherently illustrates some of the most important relationships between the different types of Subjects, and also illuminates several of the fundamental dynamics shaping business analytics as a domain.  As a corollary, the Sensemaking Spectrum also suggests innovation opportunities for products and services related to business analytics. The first illustration below shows Subjects arrayed along the Sensemaking Spectrum; the second illustration presents examples of each kind of Subject.  Subjects appear in colors ranging from blue to reddish-orange, reflecting their place along the Spectrum, which indicates whether a Subject addresses more the viewpoint of systems and data (Data centric and blue), or people (User centric and orange).  This axis is shown explicitly above the Spectrum.  Annotations suggest how Subjects align with the three significant perspectives of Data, Analysis, and Business that shape business analytics activity.  This rendering makes explicit the translation and bridging function of Analysts as a role, and analysis as an activity. Subjects are best understood as fuzzy categories [http://georgelakoff.files.wordpress.com/2011/01/hedges-a-study-in-meaning-criteria-and-the-logic-of-fuzzy-concepts-journal-of-philosophical-logic-2-lakoff-19731.pdf], rather than tightly defined buckets.  For each Subject, we suggest some of the most common examples: Entities may be physical things such as named products, or locations (a building, or a city); they could be Concepts, such as satisfaction; or they could be Relationships between entities, such as the variety of possible connections that define linkage in social networks.  Likewise, Events may indicate a time and place in the dictionary sense; or they may be Transactions involving named entities; or take the form of Signals, such as ‘some Measure had some value at some time’ - what many enterprises understand as alerts.   The central story of the Spectrum is that though consumers of analytical insights (represented here by the Business perspective) need to work in terms of Subjects that are directly meaningful to their perspective — such as Themes, Plans, and Goals — the working realities of data (condition, structure, availability, completeness, cost) and the changing nature of most discovery efforts make direct engagement with source data in this fashion impossible.  Accordingly, business analytics as a domain is structured around the fundamental assumption that sense making depends on analytical transformation of data.  Analytical activity incrementally synthesizes more complex and larger scope Subjects from data in its starting condition, accumulating insight (and value) by moving through a progression of stages in which increasingly meaningful Subjects are iteratively synthesized from the data, and recombined with other Subjects.  The end goal of  ‘laddering’ successive transformations is to enable sense making from the business perspective, rather than the analytical perspective.Synthesis through laddering is typically accomplished by specialized Analysts using dedicated tools and methods. Beginning with some motivating question such as seeking opportunities to increase the efficiency (a Theme) of fulfillment processes to reach some level of profitability by the end of the year (Plan), Analysts will iteratively wrangle and transform source data Records, Values and Attributes into recognizable Entities, such as Products, that can be combined with Measures or other data into the Events (shipment of orders) that indicate the workings of the business.  More complex Subjects (to the right of the Spectrum) are composed of or make reference to less complex Subjects: a business Process such as Fulfillment will include Activities such as confirming, packing, and then shipping orders.  These Activities occur within or are conducted by organizational units such as teams of staff or partner firms (Networks), composed of Entities which are structured via Relationships, such as supplier and buyer.  The fulfillment process will involve other types of Entities, such as the products or services the business provides.  The success of the fulfillment process overall may be judged according to a sophisticated operating efficiency Model, which includes tiered Measures of business activity and health for the transactions and activities included.  All of this may be interpreted through an understanding of the operational domain of the businesses supply chain (a Domain).   We'll discuss the Spectrum in more depth in succeeding posts.

    Read the article

  • Is throwing an error in unpredictable subclass-specific circumstances a violation of LSP?

    - by Motti Strom
    Say, I wanted to create a Java List<String> (see spec) implementation that uses a complex subsystem, such as a database or file system, for its store so that it becomes a simple persistent collection rather than an basic in-memory one. (We're limiting it specifically to a List of Strings for the purposes of discussion, but it could extended to automatically de-/serialise any object, with some help. We can also provide persistent Sets, Maps and so on in this way too.) So here's a skeleton implementation: class DbBackedList implements List<String> { private DbBackedList() {} /** Returns a list, possibly non-empty */ public static getList() { return new DbBackedList(); } public String get(int index) { return Db.getTable().getRow(i).asString(); // may throw DbExceptions! } // add(String), add(int, String), etc. ... } My problem lies with the fact that the underlying DB API may encounter connection errors that are not specified in the List interface that it should throw. My problem is whether this violates Liskov's Substitution Principle (LSP). Bob Martin actually gives an example of a PersistentSet in his paper on LSP that violates LSP. The difference is that his newly-specified Exception there is determined by the inserted value and so is strengthening the precondition. In my case the connection/read error is unpredictable and due to external factors and so is not technically a new precondition, merely an error of circumstance, perhaps like OutOfMemoryError which can occur even when unspecified. In normal circumstances, the new Error/Exception might never be thrown. (The caller could catch if it is aware of the possibility, just as a memory-restricted Java program might specifically catch OOME.) Is this therefore a valid argument for throwing an extra error and can I still claim to be a valid java.util.List (or pick your SDK/language/collection in general) and not in violation of LSP? If this does indeed violate LSP and thus not practically usable, I have provided two less-palatable alternative solutions as answers that you can comment on, see below. Footnote: Use Cases In the simplest case, the goal is to provide a familiar interface for cases when (say) a database is just being used as a persistent list, and allow regular List operations such as search, subList and iteration. Another, more adventurous, use-case is as a slot-in replacement for libraries that work with basic Lists, e.g if we have a third-party task queue that usually works with a plain List: new TaskWorkQueue(new ArrayList<String>()).start() which is susceptible to losing all it's queue in event of a crash, if we just replace this with: new TaskWorkQueue(new DbBackedList()).start() we get a instant persistence and the ability to share the tasks amongst more than one machine. In either case, we could either handle connection/read exceptions that are thrown, perhaps retrying the connection/read first, or allow them to throw and crash the program (e.g. if we can't change the TaskWorkQueue code).

    Read the article

  • Three Global Telecoms Soar With Siebel

    - by michael.seback
    Deutsche Telekom Group Selects Oracle's Siebel CRM to Underpin Next-Generation CRM Strategy The Deutsche Telekom Group (DTAG), one of the world's leading telecommunications companies, and a customer of Oracle since 2001, has invested in Oracle's Siebel CRM as the standard platform for its Next Generation CRM strategy; a move to lower the cost of managing its 120 million customers across its European businesses. Oracle's Siebel CRM is planned to be deployed in Germany and all of the company's European business within five years. "...Our Next-Generation strategy is a significant move to lower our operating costs and enhance customer service for all our European customers. Not only is Oracle underpinning this strategy, but is also shaping the way our company operates and sells to customers. We look forward to working with Oracle over the coming years as the technology is extended across Europe," said Dr. Steffen Roehn, CIO Deutsche Telekom AG... "The telecommunications industry is currently undergoing some major changes. As a result, companies like Deutsche Telekom are needing to be more intelligent about the way they use technology, particularly when it comes to customer service. Deutsche Telekom is a great example of how organisations can use CRM to not just improve services, but also drive more commercial opportunities through the ability to offer highly tailored offers, while the customer is engaged online or on the phone," said Steve Fearon, vice president CRM, EMEA Read more. Telecom Argentina S.A. Accelerates Time-to-Market for New Communications Products and Services Telecom Argentina S.A. offers basic telephone, urban landline, and national and international long-distance services...."With Oracle's Siebel CRM and Oracle Communication Billing and Revenue Management, we started a technological transformation that allows us to satisfy our critical business needs, such as improving customer service and quickly launching new phone and internet products and services." - Saba Gooley, Chief Information Officer, Wire Line and Internet Services, Telecom Argentina S.A.Read more. Türk Telekom Develops Benefits-Driven CRM Roadmap Türk Telekom Group provides integrated telecommunication services from public switched telephone network (PSTN) and global systems for mobile communications technology (GSM). to broadband internet...."Oracle Insight provided us with a structured deployment approach that makes sense for our business. It quantified the benefits of the CRM solution allowing us to engage with the relevant business owners; essential for a successful transformation program." - Paul Taylor, VP Commercial Transformation, Türk Telekom Read more.

    Read the article

  • Spotlight on RIVA: CRM integration for Oracle CRM on Demand and Microsoft Exchange

    - by Richard Lefebvre
    Introducing Riva from Omni - an Oracle ISV partner specializing in Enterprise Management and Integration Solutions Riva delivers advanced, server-side integration for Oracle CRM On Demand and Microsoft Exchange or even Novell GroupWise. Riva allows Oracle customers to go beyond the standard Outlook plug-in to deliver additional value for the end user as they interact between Outlook and CRM On Demand. Riva syncs CRM On Demand to ALL Exchange mail apps, not just Windows Outlook.  So, whether customers are using Outlook 2010, Outlook Web Access (web client), Outlook 2011 for Mac, Apple Mail, Outlook on Citrix  or a mobile device, Riva's got them covered. There are no plug-ins to be installed, configured, managed and maintained on users' desktops, laptops as Riva delivers Server-side synchronisation for CRMOD and Exchange. The automation of CRM and Outlook integration will remove the reliance upon users to synchronise between the two with Riva handling this process. Riva allows administrators to define sync policies and apply them to individuals or groups of users depending on their sync requirements. Administrators will be able to determine and manage the exposure of the most pertinent detail to be synchronised between Outlook and CRM On Demand. Custom and organic contact filtering for large deployments i.e. Based on ownership, groupings and contact frequency, filters can be applied on what contact records are shared with the users. Riva provides the capability to synchronise CRM and Outlook beyond Contacts, Calendar entries and Email. The synchronisation can be extended to cater for  opportunities, quotes and custom objects for example within the Outlook interface. Riva SmartConvert Folders can automate the creation of opportunities and associated contacts for example if they don't already exist. This can facilitate a reduction in manual detail entry through quick association whilst also benefiting user adoption. From a mobile perspective, Riva allows users to view and manage their CRM On Demand contacts, calendar, tasks, opportunities and cases from iPad, iPhone, Android and BlackBerry devices.  Again, there are no mobile apps or additional plugins to install, configure or manage. We sync CRM On Demand to Exchange.  Because the mobile device is connected to an Exchange mailbox, the information automatically syncs down to the native address book, calendar and mail apps on the smartphone or tablet. Riva Datasheet for CRM On Demand Riva Brochure – Oracle CRM On Demand  Technical Knowledgebase & Riva Trial  http://kb.omni-ts.com/47/ Comparison to Outlook Plug-ins Riva Diagram – Riva Comparison with Outlook Plug-ins Contact: Wolfgang Berger - [email protected]

    Read the article

  • Emtel Knowledge Series - Q2/2014

    From Cyber Island to Smart Mauritius Cyber Island? Smart Mauritius? - What is Emtel talking about? "With the majority of the population living in urban environments today, the concept of "Smart Cities" has become an urgent necessity. "Smart Cities" refer to an urban transformation which, by using latest ICT technologies makes cities more efficient. Many Governments are setting out ambitious plans to build the cities of the future based on massive connectivity, high bandwidth communications, intelligent sensors and analysis of huge volumes of data. Various researches have shown four key enablers for smart city success - Government leadership, suitable technology infrastructure, solid public-private partnerships and engaged citizens. It is around these enabling factors that telecoms companies can play a vital role in assisting governments to deliver on the smart city vision." The Emtel Knowledge Series goes in compliance with Emtel's 25th anniversary celebrations throughout the year and the master of ceremony, Kim Andersen, mentioned that there will be more upcoming events on a quarterly base. As a representative of the Mauritius Software Craftsmanship Community (MSCC) there was absolutely no hesitation to join in again. Following my visit to the first Emtel Knowledge Series workshop back in February this year, it was great to have another opportunity to meet and exchange with technology experts. But quite frankly what is it with those buzz words... As far as I remember and how it was mentioned "Cyber Island" is an old initiative from around 2005/2006 which has been refreshed in 2010. It implies the empowerment of Information & Communication Technologies (ICT) as an essential factor of growth by the government here in Mauritius. Actually, the first promotional period of Cyber Island brought me here but that's another story. The venue and its own problems Like last time the event was organised and held at the Conference Hall at Cyber Tower I in Ebene. As I've been working there for some years, I know about the frustrating situation of finding a proper parking. So, does Smart Island include better solutions for the search of parking spaces? Maybe, let's see whether I will be able to answer that question at the end of the article. Anyway, after circling around the tower almost two times, I finally got a decent space to put the car, without risking to get a ticket or damage actually. International speakers and their experience Once again, Emtel did a great job to get international expertise onto the stage to share their experience and vision on this kind of embarkment. Personally, I really appreciated the fact they were speakers of global reach and could provide own-experience knowledge. Johan Gott spoke about the fundamental change that the Swedish government ignited in order to move their society and workers' environment away from heavy industry towards a knowledge-based approach. Additionally, we spoke about the effort and transformation of New York City into a greener and more efficient Smart City. Given modern technology he also advised that any kind of available Big Data should be opened to the general public - this openness would provide a playground for anyone to garner new ideas and most probably solid solutions of which no one else thought about before. Emtel Knowledge Series on moving from Cyber Island to Smart Mauritus Later during the afternoon that exact statement regarding openness to and transparency of government-owned Big Data has been emphasised again by the Danish speaker Kim Andersen and his former colleague Mika Jantunen from Finland. Mika continued to underline the important role of the government to provide a solid foundation for a knowledge-based society and mentioned that Finnish citizens have a constitutional right to broadband connectivity. Next to free higher (tertiary) education Finland already produced a good number of innovations, among them are: First country to grant voting rights to women Free higher education Constitutional right to broadband connectivity Nokia Linux Angry Birds Sauna and others...  General access to internet via broadband and/or mobile connectivity is surely a key factor towards Smart Cities, or better said Smart Mauritius given the area dimensions and size of population. CTO Paul Valette gave the audience a brief overview of the essential role that Emtel will have to move Mauritius forward towards a knowledge-based and innovation-driven environment for its citizen. What I have seen looks really promising and with recently published information that Mauritians have 127% of mobile capacity - meaning more than 1 mobile, smartphone or tablet per person - it will be crucial to have the right infrastructure for these connected devices. How would it be possible to achieve a knowledge-based society? YouTube to the rescue!Seriously, gaining more knowledge will require to have fast access to educational course material as explained by Dr Kaviraj Sukon, General Director of the Open University of Mauritius. According to him a good number of high-profile universities in the world have opened their course libraries to the general public, among them EDX, Coursera and Open University. Nowadays, you're actually able and enabled to learn for and earn a BSc or even MSc certification on your own pace - no need to attend classed on campus. It was really impressive to see the number of available hours - more than enough for a life-long learning experience! {loadposition content_adsense} Networking in the name of MSCC As briefly mentioned above I was about to combine two approaches for this workshop. Of course, getting latest information and updates on Emtel services available, especially for my business here on the west coast of the island, but also to meet and greet new people for the MSCC. And I think it was very positive on both sides. Let me quickly describe some of the key aspects that happened during the day: Met with Arnaud Meslier and Kellie, both Microsoft to swap latest information on IT events. Hereby, I got an invite to Microsoft Windows Phone 8.1 Dev Camp. Got in touch with Arvin Lockee, Emtel to check our options to meet with the data team, and seizing the opportunity to have a visiting tour at the Emtel Data Centre. Had a great chat with Avinash Meetoo, Knowledge 7, Kim Andersen and Mika Jantunen about the situation of teaching and learning in general and specifically in the private sector here in Mauritius. Additionally, a number of various other interesting chats... Once again, I'm catching up on a couple of business cards in order to provide more background information about the MSCC, and to create a better awareness of MSCC within the local IT businesses. There is more to come soon!  Resume of the day The number of attendees during this event has been doubled or even tripled this time. The whole organisation has been improved massively and the combination of presentation and summarizing panel discussions was better than during the previous workshop back in February. Overall, once again a well-organised workshop and I'm already looking forward to join the next workshop in Q3. Update End of July we finally managed to visit the Emtel Data Centre in Arsenal. It was an interesting opportunity for some of our MSCC members.

    Read the article

  • Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

    - by arlendo
    Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

    Read the article

  • DTracing TCP congestion control

    - by user12820842
    In a previous post, I showed how we can use DTrace to probe TCP receive and send window events. TCP receive and send windows are in effect both about flow-controlling how much data can be received - the receive window reflects how much data the local TCP is prepared to receive, while the send window simply reflects the size of the receive window of the peer TCP. Both then represent flow control as imposed by the receiver. However, consider that without the sender imposing flow control, and a slow link to a peer, TCP will simply fill up it's window with sent segments. Dealing with multiple TCP implementations filling their peer TCP's receive windows in this manner, busy intermediate routers may drop some of these segments, leading to timeout and retransmission, which may again lead to drops. This is termed congestion, and TCP has multiple congestion control strategies. We can see that in this example, we need to have some way of adjusting how much data we send depending on how quickly we receive acknowledgement - if we get ACKs quickly, we can safely send more segments, but if acknowledgements come slowly, we should proceed with more caution. More generally, we need to implement flow control on the send side also. Slow Start and Congestion Avoidance From RFC2581, let's examine the relevant variables: "The congestion window (cwnd) is a sender-side limit on the amount of data the sender can transmit into the network before receiving an acknowledgment (ACK). Another state variable, the slow start threshold (ssthresh), is used to determine whether the slow start or congestion avoidance algorithm is used to control data transmission" Slow start is used to probe the network's ability to handle transmission bursts both when a connection is first created and when retransmission timers fire. The latter case is important, as the fact that we have effectively lost TCP data acts as a motivator for re-probing how much data the network can handle from the sending TCP. The congestion window (cwnd) is initialized to a relatively small value, generally a low multiple of the sending maximum segment size. When slow start kicks in, we will only send that number of bytes before waiting for acknowledgement. When acknowledgements are received, the congestion window is increased in size until cwnd reaches the slow start threshold ssthresh value. For most congestion control algorithms the window increases exponentially under slow start, assuming we receive acknowledgements. We send 1 segment, receive an ACK, increase the cwnd by 1 MSS to 2*MSS, send 2 segments, receive 2 ACKs, increase the cwnd by 2*MSS to 4*MSS, send 4 segments etc. When the congestion window exceeds the slow start threshold, congestion avoidance is used instead of slow start. During congestion avoidance, the congestion window is generally updated by one MSS for each round-trip-time as opposed to each ACK, and so cwnd growth is linear instead of exponential (we may receive multiple ACKs within a single RTT). This continues until congestion is detected. If a retransmit timer fires, congestion is assumed and the ssthresh value is reset. It is reset to a fraction of the number of bytes outstanding (unacknowledged) in the network. At the same time the congestion window is reset to a single max segment size. Thus, we initiate slow start until we start receiving acknowledgements again, at which point we can eventually flip over to congestion avoidance when cwnd ssthresh. Congestion control algorithms differ most in how they handle the other indication of congestion - duplicate ACKs. A duplicate ACK is a strong indication that data has been lost, since they often come from a receiver explicitly asking for a retransmission. In some cases, a duplicate ACK may be generated at the receiver as a result of packets arriving out-of-order, so it is sensible to wait for multiple duplicate ACKs before assuming packet loss rather than out-of-order delivery. This is termed fast retransmit (i.e. retransmit without waiting for the retransmission timer to expire). Note that on Oracle Solaris 11, the congestion control method used can be customized. See here for more details. In general, 3 or more duplicate ACKs indicate packet loss and should trigger fast retransmit . It's best not to revert to slow start in this case, as the fact that the receiver knew it was missing data suggests it has received data with a higher sequence number, so we know traffic is still flowing. Falling back to slow start would be excessive therefore, so fast recovery is used instead. Observing slow start and congestion avoidance The following script counts TCP segments sent when under slow start (cwnd ssthresh). #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::connect-request / start[args[1]-cs_cid] == 0/ { start[args[1]-cs_cid] = 1; } tcp:::send / start[args[1]-cs_cid] == 1 && args[3]-tcps_cwnd tcps_cwnd_ssthresh / { @c["Slow start", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / start[args[1]-cs_cid] == 1 && args[3]-tcps_cwnd args[3]-tcps_cwnd_ssthresh / { @c["Congestion avoidance", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } As we can see the script only works on connections initiated since it is started (using the start[] associative array with the connection ID as index to set whether it's a new connection (start[cid] = 1). From there we simply differentiate send events where cwnd ssthresh (congestion avoidance). Here's the output taken when I accessed a YouTube video (where rport is 80) and from an FTP session where I put a large file onto a remote system. # dtrace -s tcp_slow_start.d ^C ALGORITHM RADDR RPORT #SEG Slow start 10.153.125.222 20 6 Slow start 138.3.237.7 80 14 Slow start 10.153.125.222 21 18 Congestion avoidance 10.153.125.222 20 1164 We see that in the case of the YouTube video, slow start was exclusively used. Most of the segments we sent in that case were likely ACKs. Compare this case - where 14 segments were sent using slow start - to the FTP case, where only 6 segments were sent before we switched to congestion avoidance for 1164 segments. In the case of the FTP session, the FTP data on port 20 was predominantly sent with congestion avoidance in operation, while the FTP session relied exclusively on slow start. For the default congestion control algorithm - "newreno" - on Solaris 11, slow start will increase the cwnd by 1 MSS for every acknowledgement received, and by 1 MSS for each RTT in congestion avoidance mode. Different pluggable congestion control algorithms operate slightly differently. For example "highspeed" will update the slow start cwnd by the number of bytes ACKed rather than the MSS. And to finish, here's a neat oneliner to visually display the distribution of congestion window values for all TCP connections to a given remote port using a quantization. In this example, only port 80 is in use and we see the majority of cwnd values for that port are in the 4096-8191 range. # dtrace -n 'tcp:::send { @q[args[4]-tcp_dport] = quantize(args[3]-tcps_cwnd); }' dtrace: description 'tcp:::send ' matched 10 probes ^C 80 value ------------- Distribution ------------- count -1 | 0 0 |@@@@@@ 5 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 0 512 | 0 1024 | 0 2048 |@@@@@@@@@ 8 4096 |@@@@@@@@@@@@@@@@@@@@@@@@@@ 23 8192 | 0

    Read the article

  • How To Deal With Terrible Design Decisions

    - by splatto
    I'm a consultant at one company. There is another consultant who is a year older than me and has been here 3 months longer than I have, and a full time developer. The full-time developer is great. My concern is that I see the consultant making absolutely terrible design decisions. For example, M:M relationships are being stored in the database as a comma-delimited string rather than using a conjunction table to hold the relationships. For example, consider two tables, Car and Property: Car records: Camry Volvo Mercedes Property records: Spare Tire Satellite Radio Ipod Support Standard Rather than making a table CarProperties to represent this, he has made a "Property" attribute on the Car table whose data looks like "1,3,7,13,19,25," I hate how this decision and others are affecting the quality of my code. We have butted heads over this design three times in the past two months since I've been here. He asked me why my suggestion was better, and I responded that our database would be eliminating redundant data by converting to a higher normal form. I explained that this design flaw in particular is discussed and discouraged in entry level college programs, and he responded with a shot at me saying that these comma-separated-value database properties are taught when you do your masters (which neither of us have). Needless to say, he became very upset and demanded I apologize for criticizing his work, which I did in the interest of not wanting to be the consultant to create office drama. Our project manager is focused on delivering a product ASAP and is a very strong personality - Suggesting to him at this point that we spend some time to do this right will set him off. There is a strong likelihood that both of our contracts will be extended to work on a second project coming up. How will I be able to exert dominant influence over the design of the system and the data model to ensure that such terrible mistakes are not repeated in the next project? A glimpse at the dynamics: I can be a strong personality if I don't measure myself. The other consultant is not a strong personality, is a poor communicator, is quite stubborn and thinks he is better than everyone else. The project manager is an extremely strong personality who is focused on releasing tomorrow's product yesterday. The full-time developer is very laid back and easy going, a very effective communicator, but is someone who will accept bad design if it means not rocking the boat. Code reviews or anything else that takes "time" will be out of the question - there is no way our PM will be sold on such a thing by anybody.

    Read the article

  • How to fix 'grub error file not found' when installing 12.04?

    - by Tomasz Grabowski
    i'm trying to install Ubuntu. I don't know if it is important, but i'm trying to install it on external HDD. In the end i have external bootable HDD which only displays: error: file not found grub recovery> From the beginning: I've downloaded ubuntu-12.04-desktop-i386.iso I've used LiLi USB Creator (LinuxLive) to create bootable pendrive from that image I've bootet from it, it works I've clicked "Try ubuntu", it works too. I've used GParted to look over drivers (disks) My primary embedded disk is seen as /dev/sda My attached external disk as /dev/sdb My PenDrive as /dev/sdc I've created partitions on /dev/sdb Fist partition for system (over 200GiB) Second was there already (it's xsf, and i don't want to touch it :P) Third is extended partition, with 1 locital partiton (10GiB) for swap I've started installation i've choose "somethin else" in ... i belive secound screeb then is selected /dev/sdb as boot disk for first partiton of /dev/sdb i set i want ext3 file system, i've check "formattin" checkbox, and mount path set to "/" firs logical partiton set as swap partition After installation finished, i restarted my computer. When i boot from my primary disc it's work ok, my previous operating system - vista - works ok. When i set my BIOS to boot from my external disc, i only get that message: error: file not found grub recovery> I've try to reinstall it, but didn't help... In desperation, i've try to read a bit about that "grub recovery" command-line and experiment a bit... I'm not sure if this has had any point, or if it give you some information (notice, that i don't know what i'm doing :P ) when i've type command: insmod (hd1,1)/boot/grub/linux.mod i've get message: unknown filesystem the same with: insmod (hd1,msdos1)/boot/grub/linux.mod the same with: insmod ext3 but i get no message after command: insmod ext2 ... notice that i really don't know what this command exactly do, but than i thought that maybe if i reinstall ubuntu with ext2 filesystem, it will work. I've done that, but symptoms are the same. I've go back to that Live version of ubuntu, filesystem and basics directories seems to be present on /dev/sdb1 ... i'm completely unfamiliar with GRUB. I'm also don't know which wersion of GRUB it is, i hope there is only one version on ubuntu-12.04-desktop-i386.iso Any help? Thax

    Read the article

  • Telesharp – An Application Repository for .NET applications

    - by cibrax
    A year ago, we released SO-Aware as our first product in Tellago Studios. SO-Aware represented a new way to manage web services and all the related artifacts like configuration, tests or monitoring data in the Microsoft stack. It was based on the idea of using a lightweight SOA governance approach with a central repository exposed through RESTful services. At that point, we thought the same idea could be extended to enterprise applications in general by providing a generic repository for many of the runtime or design time artifacts generated during the development like configuration, application description or topology (a high level view of the components that made up a system), logging information or binaries. It took us several months to give a form to that idea and implement it as a product, but it is finally here and I am very proud to announce the release today under the name of “TeleSharp”. Telesharp provides in a nutshell the following features, 1. Configure your application topology in a central repository. Application topology in this context means that you can decompose your application and describe it in terms of components and how they interact each other. For example, you can tell that the CRM system is made up of a couple of WCF services and a ASP.NET MVC front end. 2. Centralize configuration for your applications and components.  You can import existing .NET configuration sections into the repository and associate them to the different components. In addition, environment overrides are supported for the configuration sections. We provide tooling and extensions in Visual Studio for managing all the configuration, and a set of powershell commands for automating the configuration deployment. 3. Browse all the assemblies and types remotely in your application servers in a web browser using an interface similar to any of the existing .NET reflection tools. You can easily determine this way whether the server is running the correct version of your applications. 4. Centralize logging and exception management into the repository. You get different reports and a pivot viewer experience for browsing all the different logging information generated by your applications. In addition, TeleSharp provides different providers for pushing the logging information to the central repository using well-known frameworks like ELMAH, Log4Net, EntLib or even Windows ETW.  The central repository itself is implemented as a set of OData services that any application can easily consume using regular Http. You can read more details in this introductory post If you think this product can be a good fit in your organization, you can request a trial version in our Tellago Studios website.

    Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >