Search Results

Search found 6397 results on 256 pages for 'ssh agent'.

Page 251/256 | < Previous Page | 247 248 249 250 251 252 253 254 255 256  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Write-error on swap-device, Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

    - by Jan
    My root server at 1&1 was unresponsive on HTTP and SSH, so I logged into the serial console . It flooded my connection with endless error messages like quoted below. I initiated a reboot and now everything seems to work properly. After googling, I installed smartctl and ran a short self test, which told me the device was healthy. Is this likely a disk failure soon to happen or could it be just some program going wild? I assume, the swap device could also grow full when huge amounts of memory get consumed by a buggy program? How can I find out for sure? The sever was already unresponsive a week ago when I just restarted it without proper investigation. The server is running on CentOS. Write-error on swap-device (8:16:8351055) Write-error on swap-device (8:16:8351063) Write-error on swap-device (8:16:8351071) Write-error on swap-device (8:16:8351079) Write-error on swap-device (8:16:8351087) Write-error on swap-device (8:16:8351095) Write-error on swap-device (8:16:8351103) Write-error on swap-device (8:16:8351111) Write-error on swap-device (8:16:8351119) Write-error on swap-device (8:16:8351127) Write-error on swap-device (8:16:8351135) Write-error on swap-device (8:16:8351143) Write-error on swap-device (8:16:8351151) Write-error on swap-device (8:16:8351159) Write-error on swap-device (8:16:8351167) Write-error on swap-device (8:16:8351175) Write-error on swap-device (8:16:8351183) Write-error on swap-device (8:16:8351191) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 00 ef 00 00 08 00 end_request: I/O error, dev sdb, sector 10223855 Write-error on swap-device (8:16:10223863) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 0e 97 00 00 10 00 end_request: I/O error, dev sdb, sector 10227351 Write-error on swap-device (8:16:10227359) Write-error on swap-device (8:16:10227367) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c b0 1f 00 00 10 00 end_request: I/O error, dev sdb, sector 10268703 Write-error on swap-device (8:16:10268711) Write-error on swap-device (8:16:10268719) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a0 84 7f 00 00 08 00 end_request: I/O error, dev sdb, sector 10519679 Write-error on swap-device (8:16:10519687) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a7 26 af 00 04 00 00 end_request: I/O error, dev sdb, sector 10954415 Write-error on swap-device (8:16:10954423) Write-error on swap-device (8:16:10954431) Write-error on swap-device (8:16:10954439) Write-error on swap-device (8:16:10954447) Write-error on swap-device (8:16:10954455) Write-error on swap-device (8:16:10954463) Write-error on swap-device (8:16:10954471) Write-error on swap-device (8:16:10954479) Write-error on swap-device (8:16:10954487) Write-error on swap-device (8:16:10954495) Write-error on swap-device (8:16:10954503) Write-error on swap-device (8:16:10954511) Write-error on swap-device (8:16:10954519) Write-error on swap-device (8:16:10954527) Write-error on swap-device (8:16:10954535) Write-error on swap-device (8:16:10954543) Write-error on swap-device (8:16:10954551) Write-error on swap-device (8:16:10954559) Write-error on swap-device (8:16:10954567) Write-error on swap-device (8:16:10954575) Write-error on swap-device (8:16:10954583) Write-error on swap-device (8:16:10954591) Write-error on swap-device (8:16:10954599) Write-error on swap-device (8:16:10954607) Write-error on swap-device (8:16:10954615) Write-error on swap-device (8:16:10954623) Write-error on swap-device (8:16:10954631) Write-error on swap-device (8:16:10954639) Write-error on swap-device (8:16:10954647) Write-error on swap-device (8:16:10954655) Write-error on swap-device (8:16:10954663) Write-error on swap-device (8:16:10954671) Write-error on swap-device (8:16:10954679) Write-error on swap-device (8:16:10954687) Write-error on swap-device (8:16:10954695) Write-error on swap-device (8:16:10954703) Write-error on swap-device (8:16:10954711) Write-error on swap-device (8:16:10954719) Write-error on swap-device (8:16:10954727) Write-error on swap-device (8:16:10954735) Write-error on swap-device (8:16:10954743) Write-error on swap-device (8:16:10954751) Write-error on swap-device (8:16:10954759) Write-error on swap-device (8:16:10954767) Write-error on swap-device (8:16:10954775) Write-error on swap-device (8:16:10954783) Write-error on swap-device (8:16:10954791) Write-error on swap-device (8:16:10954799) Write-error on swap-device (8:16:10954807) Write-error on swap-device (8:16:10954815) Write-error on swap-device (8:16:10954823) Write-error on swap-device (8:16:10954831) Write-error on swap-device (8:16:10954839) Write-error on swap-device (8:16:10954847) Write-error on swap-device (8:16:10954855) Write-error on swap-device (8:16:10954863) Write-error on swap-device (8:16:10954871) Write-error on swap-device (8:16:10954879) Write-error on swap-device (8:16:10954887) Write-error on swap-device (8:16:10954895) Write-error on swap-device (8:16:10954903) Write-error on swap-device (8:16:10954911) Write-error on swap-device (8:16:10954919) Write-error on swap-device (8:16:10954927) Write-error on swap-device (8:16:10954935) Write-error on swap-device (8:16:10954943) Write-error on swap-device (8:16:10954951) Write-error on swap-device (8:16:10954959) Write-error on swap-device (8:16:10954967) Write-error on swap-device (8:16:10954975) Write-error on swap-device (8:16:10954983) Write-error on swap-device (8:16:10954991) Write-error on swap-device (8:16:10954999) Write-error on swap-device (8:16:10955007) Write-error on swap-device (8:16:10955015) Write-error on swap-device (8:16:10955023) Write-error on swap-device (8:16:10955031) Write-error on swap-device (8:16:10955039) Write-error on swap-device (8:16:10955047) Write-error on swap-device (8:16:10955055) Write-error on swap-device (8:16:10955063) Write-error on swap-device (8:16:10955071) Write-error on swap-device (8:16:10955079) Write-error on swap-device (8:16:10955087) Write-error on swap-device (8:16:10955095) Write-error on swap-device (8:16:10955103) Write-error on swap-device (8:16:10955111) Write-error on swap-device (8:16:10955119) Write-error on swap-device (8:16:10955127) Write-error on swap-device (8:16:10955135) Write-error on swap-device (8:16:10955143) Write-error on swap-device (8:16:10955151) Write-error on swap-device (8:16:10955159) Write-error on swap-device (8:16:10955167) Write-error on swap-device (8:16:10955175) Write-error on swap-device (8:16:10955183)

    Read the article

  • migrating simple rails database to mysql

    - by joseph-misiti
    i am interested in creating a rails app with a mysql database. i am new to rails and am just trying to start creating something simple: rails -d mysql MyMoviesSQL cd MyMoviesSQL script/generate scaffold Movies title:string rating:integer rake db:migrate i am seeing the following error: rake aborted! NoMethodError: undefined method `ord' for 0:Fixnum: SET NAMES 'utf8' if i do a trace: ** Invoke db:migrate (first_time) ** Invoke environment (first_time) ** Execute environment ** Execute db:migrate rake aborted! NoMethodError: undefined method ord' for 0:Fixnum: SET NAMES 'utf8' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract_adapter.rb:219:inlog' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:323:in execute' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:599:inconfigure_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:594:in connect' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:203:ininitialize' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:75:in new' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:75:inmysql_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:223:in send' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:223:innew_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:245:in checkout_new_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:188:incheckout' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:184:in loop' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:184:incheckout' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in synchronize' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:183:incheckout' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:98:in connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:326:inretrieve_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:123:in retrieve_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:115:inconnection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:435:in initialize' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:400:innew' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:400:in up' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:383:inmigrate' /Library/Ruby/Gems/1.8/gems/rails-2.3.5/lib/tasks/databases.rake:116 /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:inexecute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:inexecute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:597:in invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:insynchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:583:ininvoke' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2051:in invoke_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:intop_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:intop_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:intop_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:instandard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/bin/rake:31 /usr/bin/rake:19:inload' /usr/bin/rake:19 here are my versions: rails - 2.3.5 ruby - 1.8.6 gem list * LOCAL GEMS * actionmailer (2.3.5, 1.3.6) actionpack (2.3.5, 1.13.6) actionwebservice (1.2.6) activerecord (2.3.5, 1.15.6) activeresource (2.3.5) activesupport (2.3.5, 1.4.4) acts_as_ferret (0.4.1) capistrano (2.0.0) cgi_multipart_eof_fix (2.5.0) daemons (1.0.9) dbi (0.4.3) deprecated (2.0.1) dnssd (0.6.0) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.4) gem_plugin (0.2.3) highline (1.2.9) hpricot (0.6) libxml-ruby (0.9.5, 0.3.8.4) mongrel (1.1.4) needle (1.3.0) net-sftp (1.1.0) net-ssh (1.1.2) rack (1.0.1) rails (2.3.5) rake (0.8.7, 0.7.3) RedCloth (3.0.4) ruby-openid (1.1.4) ruby-yadis (0.3.4) rubygems-update (1.3.6) rubynode (0.1.3) sqlite3-ruby (1.2.1) termios (0.9.4) also, if i need to add a patch to FixNum, can someone please tell which file to add the patch to. thanks for your help

    Read the article

  • Apache2 mod_proxy to remote Tomcat7 - slow response

    - by 12N
    Been stuck with this one for a few days. Will try to provide as much information as possible, but please feel free to ask for extra detail. I have 2 VMs behind a NAT, 192.168.0.100 and 192.168.0.102, both running Ubuntu 11.04 x64. The first one is mapped to the exterior and is our webserver, has one Apache/2.2.17 install with several vhosts to serve static content, and there's also mod_jk for load balancing. The second one has a tomcat 7 install with several J2EE REST webservices but no apache - requests are expected to be passed directly from .100 apache to .102 tomcat. It is my intention to prepare a tomcat clustered environment. My problem: Requests reach to 192.168.0.100 with no trouble whatsoever, but then take about... 100 seconds for data to actually arrive to .102 - by that time apache has already timeouted, but tomcat receives and processes the request pretty normally. This happens both when using mod_jk, mod_proxy, or mod_ajp_proxy. No idea why, since there are no firewalls in either of the machines, both are pingable - more than that, there are NFS shares active working like a charm - and a mod_proxy experience shown that requests originating directly from .100 are processed normally. Also, to add insult to injury, a similar environment is set up at our office network. Everything works perfectly. -_- The only difference? We have no ip translation at the office and do everything by internal addresses - dunno if that's relevant in any way. Some configs: Apache vhost: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ ServerName www.example.com ProxyRequests Off <Proxy *> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Proxy> ProxyPass /bork http://192.168.0.102:8080/bork ProxyPassReverse /bork http://192.168.0.102:8080/bork LogLevel debug CustomLog ${APACHE_LOG_DIR}/api_access.log combined ErrorLog ${APACHE_LOG_DIR}/api_error.log </VirtualHost> Tomcat connectors <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> And a debug log from apache, from a test using mod_proxy_ajp. The behavior is pretty much the same in mod_proxy, at least regarding the delay. Please note that tomcat eventually receives and processes the request, more or less when the log starts being updated again: [Sun May 06 14:40:33 2012] [debug] proxy_util.c(1506): [client 188.81.234.2] proxy: ajp: found worker ajp://192.168.0.102:8008/bork for ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] mod_proxy.c(1015): Running scheme ajp handler (attempt 0) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(661): proxy: AJP: serving URL ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2011): proxy: AJP: has acquired connection for (192.168.0.102) [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2067): proxy: connecting ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2193): proxy: connected /bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2444): proxy: AJP: fam 2 socket created to connect to 192.168.0.102 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(224): Into ajp_marshal_into_msgb [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[0] [Accept-Encoding] = [gzip,deflate] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[1] [Content-Type] = [text/xml;charset=UTF-8] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[2] [SOAPAction] = [""] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[3] [User-Agent] = [Jakarta Commons-HttpClient/3.1] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[4] [Host] = [www.example.com] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[5] [Content-Length] = [520] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(450): ajp_marshal_into_msgb: Done [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(267): proxy: APR_BUCKET_IS_EOS [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(272): proxy: data to read (max 8186 at 4) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(287): proxy: got 520 bytes of data [Sun May 06 14:40:33 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 06 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(697): ajp_parse_type: got 06 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5916 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5916 for (192.168.0.100) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5916 for worker http://192.168.0.102:8080 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5916 for (192.168.0.102) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5916 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5916 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5918 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5918 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5918 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5917 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5917 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5917 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5917 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5917 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5917 for (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(516): ajp_unmarshal_response: status = 200 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(537): ajp_unmarshal_response: Number of headers is = 1 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(599): ajp_unmarshal_response: Header[0] [Content-Type] = [text/xml;charset=utf-8] [Sun May 06 14:42:09 2012] [debug] ajp_header.c(609): ajp_unmarshal_response: ap_set_content_type done [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 05 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 05 [Sun May 06 14:42:09 2012] [debug] mod_deflate.c(615): [client 188.81.234.2] Zlib: Compressed 447 to 255 : URL /bork/SSOIdentityProviderSoap [Sun May 06 14:42:09 2012] [debug] mod_proxy_ajp.c(570): proxy: got response from (null) (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] proxy_util.c(2029): proxy: AJP: has released connection for (192.168.0.102) [Sun May 06 14:42:09 2012] [info] [client 188.81.234.2] Request body read timeout Was wondering if any one could provide some advice, perhaps even point out any hideous, horrible configuration error? thanks in advance!

    Read the article

  • Juniper SSG-5 subinterface vlan routing to the internet

    - by catfish
    I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

    Read the article

  • Openswan + xl2tpd connections time out after a while

    - by Halfgaar
    I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

    Read the article

  • CakePHP sending multiple lines of same cookie information in response header. why??

    - by Vicer
    Hi all, I am having this problem with one of my cakePHP applications. My application displays a big html table on the page. I noticed that when the table goes beyond a certain size limit, IE cannot display that page. While trying to figure out why this happens, I noticed that my html response header contains a HUGE number of lines repeating the same thing. Response Headers ------------------------------ Date Thu, 20 May 2010 04:18:10 GMT Server Apache/2.0.63 (Win32) mod_ssl/2.0.63 OpenSSL/0.9.7m PHP/5.2.10 X-Powered-By PHP/5.2.10 P3P CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM" Set-Cookie CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:12 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1; expires=Sun, 20-May-2035 10:18:13 GMT; path=/mywebapp Keep-Alive timeout=15, max=100 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html ========================================================================== Request Headers -------------------------- Host localhost:8080 User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729) Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://localhost:8080/mywebapp/section2/bigtable/1 Cookie CAKEPHP=q4tp37tn9gkhcpgmf1ftr1i6c1 Authorization Basic cGt1bWFyYTpwa3VtYXJh Notice the huge set of repeated lines at 'Set-Cookie' in the Response Header. This only happens when I try to display large tables. Does anyone have any clue to what might be causing this? Any help to find the issue is appreciated. I am using CakePHP 1.2.5. As far as I know, I am not messing with any set cookie functions. But yes I am using session variables.

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections

    - by Hammer Bro.
    Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

  • Linux IPTables / routing issue

    - by Jon
    Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

    Read the article

  • LDAP query on linux against AD returns groups with no members

    - by SethG
    I am using LDAP+kerberos to authenticate against Active Directory on Windows 2003 R2. My krb5.conf and ldap.conf appear to be correct (according to pretty much every sample I found on the 'net). I can login to the host with both password and ssh keys. When I run getent passwd, all my ldap user accounts are listed with all the important attributes. When I run getent group, all the ldap groups and their gid's are listed, but no group members. If I run ldapsearch and filter on any group, the members are all listed with the "member" attribute. So the data is there for the taking, it's just not being parsed properly. It would appear that I simply am using an incorrect mapping in ldap.conf, but I can't see it. I've tried several variations and all give the same result. Here is my current ldap.conf: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy hard nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=User pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad Here's the kicker: this config works 100% fine on a different linux box with a different distro. It does not work on the distro I am planning on switching to. I have installed from source the versions of pam_ldap and nss_ldap on the new box to match the old box, which fixed another problem I was having with this setup. Other relevant info is the original AD box was Windows 2003. It's mirror died a horrible hardware death so I'm trying to add two more 2003-R2 servers to the mirror tree and ultimately drop the old 2003 box. The new R2 boxes appear to have joined the DC forest properly. What do I need to do to get groups working? I've exhausted all the resources I could find and need a different angle. Any input is appreciated. Status update, 7/31/09 I have managed to tweak my config file to get full info from the AD and performance is nice and snappy. I replaced the back-rev'd copies of pam_ldap and nss_ldap with the current ones for the distro I'm using, so it's back to a standard out-of-the-box install. Here's my current config: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy soft nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_connect_policy oneshot referrals no nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=CN=Person,CN=Schema,CN=Configuration,DC=w2k,DC=cis,DC=ksu,DC=edu pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad ssl off tls_checkpeer no sasl_secprops maxssf=0 The remaining problem now is when you run the groups command, not all subscribed groups are listed. Some are (one or two), but not all. Group memberships are still honored, such as file and printer access. getent group foo still shows that the user is a member of group foo. So it appears to be a presentation bug, and does not interfere with normal operation. It also appears that some (I have not determined exactly how many) group searches do not resolve correctly, even though the group is listed. eg, when you run "getent group bar", nothing is returned, but if you run "getent group|grep bar" or "getent group|grep <bar_gid>" you can see that it indeed listed and your group name and gid are correct. This still seems like an LDAP search or mapping error, but I can't figure out what it is. I'm a heckuva lot closer than earlier in the week, but I'd really like to get this last detail ironed out.

    Read the article

  • Xenserver 5.5 U2 a bit unstable with an unstable W2003 VM

    - by twistedbrain
    In the last week I had to reboot the host system twice and the second one by means of the power button. The system is a Dell PE 6950 (4 Opteron dual core, 2,8 Ghz, 16 GB RAM, 900 GB disk in a RAID 10 array composed by 4 450GB 15000 rpm disks) with XenServer 5.5 U2. We're installing it and at now there are working in production a 2003 32 bit Windows server VM with 2 GB RAM, 3 vcpu and about 200 GB disk in 4 partition (12 GB boot, 20 GB program, 80 GB user data, 80 GB other data). The first time I was compressing many Windows 2003 folders (some tens GB by means of W2003 compressed folder option) from a Windows remote console and some hours before my colleague installed Backup Exec agent that was alredy installed and that required a reboot (that was pending). The console stopped responding, it was no more possible to connect by means of remote console or by means of the console of the XenCentre, it was still possible from the network to use the shared folder of the VM and the programs on it (2 db and a GIS program), but the print server didn't work any more and I couldn't give remote reboot from other domain controller hosts. I couldn't stop the virtual machine neither from the XenCentre, neither from the command line of the host also forcing the reboot. I had to reboot the host server. Yesterday it has been worst. I installed a template of another VM, CentOS 5.3 and then, put the DVD in the drive of the host. Then, before the install and after the boot I checked for defect the DVD and the W2003 VM began to respond slowly (I was connected by means of an administration remote console) the task manager showed only mid or low load, it is, only the first of the 3 vcpu was loaded (about 70%), while the other two were about at 20% and also the disk I/O was not so heavy. Then the users were not so happy because they couldn't any more use the MS word docs on the server. I immediately stopped the check of the DVD (to do that I had to force the stop of such Centos 5.3 VM), then some users could again use their docs, but other had still problems, so I decided to reboot the VM, but it doesn't stopped, neither from XenCenter, neither from command line, neither forcing the reboot. Then I tried to reboot of the host, but it didn't worked, neither from the XenCentre, neither from the host prompt (shutdown -r now as root: it told that it was shutting down, but then it didn't did that). So I had to power off by means of the power button of the server (before I tried some Magic SyS REQ, but I saw that Xen isn't compiled with this option enabled). What could you suggest about my problem, what can I look, search and see? In the W2003 VM logs there are no errors or warning to explain what happened. Some more exciting, amusing and inspiring words of poetry (the facts happened around 11 am): \# egrep -i 'err|warning' xensource.log [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: watching xenstore paths: [ /xapi/0/frontend/vbd/51712/hotplug; /local/domain/0/backend/vbd/0/51712/tapdisk-error ] with timeout 1200.000000 seconds [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: fired on /local/domain/0/backend/vbd/0/51712/tapdisk-error [20100219 10:32:14.314|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: watching xenstore paths: [ /local/domain/0/backend/vbd/0/51712/shutdown-done; /local/domain/0/error/device/vbd/51712/error ] with timeout 1200.000000 seconds [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/0 [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/device/vbd/51712 [20100219 10:32:14.338|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: fired on /local/domain/0/error/device/vbd/51712/error [20100219 10:53:48.903|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 14 guest session [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51744 [20100219 10:53:52.085|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.086|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51728 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51712 [20100219 10:53:52.127|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vbd/14 [20100219 10:53:52.128|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51760 [20100219 10:53:52.496|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/0 [20100219 10:53:53.385|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/1 [20100219 10:53:53.389| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/0 [20100219 10:53:53.391| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/1 [20100219 11:20:49.766|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 11 guest session [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/832 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/768 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/11 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/5696 [20100219 11:20:50.753|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vif/11 [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vif/1 [20100219 11:20:50.757| warn|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|hotplug] Warning, deleting 'vif' entry from /xapi/11/hotplug/vif/1 [20100219 11:28:13.803|debug|culo|6610 inet-RPC|Connection to VM console R:e9f8b76e8975|console] error: INTERNAL_ERROR: [ Unix.Unix_error(63, "connect", "") ]

    Read the article

  • OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

    - by michael
    I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

    Read the article

  • Varnish "FetchError no backend connection" error

    - by clueless-anon
    Varnishlog: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829925 1.0 12 SessionOpen c 79.124.74.11 3063 :80 12 SessionClose c EOF 12 StatSess c 79.124.74.11 3063 0 1 0 0 0 0 0 0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829928 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829931 1.0 12 SessionOpen c 108.62.115.226 46211 :80 12 ReqStart c 108.62.115.226 46211 467185881 12 RxRequest c GET 12 RxURL c / 12 RxProtocol c HTTP/1.0 12 RxHeader c User-Agent: Pingdom.com_bot_version_1.4_(http://www.pingdom.com/) 12 RxHeader c Host: www.mysite.com 12 VCL_call c recv lookup 12 VCL_call c hash 12 Hash c / 12 Hash c www.mysite.com 12 VCL_return c hash 12 VCL_call c miss fetch 12 FetchError c no backend connection 12 VCL_call c error deliver 12 VCL_call c deliver deliver 12 TxProtocol c HTTP/1.1 12 TxStatus c 503 12 TxResponse c Service Unavailable 12 TxHeader c Server: Varnish 12 TxHeader c Content-Type: text/html; charset=utf-8 12 TxHeader c Retry-After: 5 12 TxHeader c Content-Length: 418 12 TxHeader c Accept-Ranges: bytes 12 TxHeader c Date: Wed, 27 Jun 2012 20:45:31 GMT 12 TxHeader c X-Varnish: 467185881 12 TxHeader c Age: 1 12 TxHeader c Via: 1.1 varnish 12 TxHeader c Connection: close 12 Length c 418 12 ReqEnd c 467185881 1340829931.192433119 1340829931.891024113 0.000051022 0.698516846 0.000074035 12 SessionClose c error 12 StatSess c 108.62.115.226 46211 1 1 1 0 0 0 256 418 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829934 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829937 1.0 netstat -tlnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3086/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1915/varnishd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1279/sshd tcp 0 0 127.0.0.2:25 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:6082 0.0.0.0:* LISTEN 1914/varnishd tcp 0 0 127.0.0.2:9000 0.0.0.0:* LISTEN 1317/php-fpm.conf) tcp 0 0 127.0.0.2:3306 0.0.0.0:* LISTEN 1192/mysqld tcp 0 0 127.0.0.2:587 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:11211 0.0.0.0:* LISTEN 3072/memcached tcp6 0 0 :::8080 :::* LISTEN 3086/nginx tcp6 0 0 :::80 :::* LISTEN 1915/varnishd tcp6 0 0 :::22 :::* LISTEN 1279/sshd /etc/nginx/site-enabled/default server { listen 8080; ## listen for ipv4; this line is default and implied listen [::]:8080 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm index.php; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.2; deny all; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.2:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } /etc/nginx/sites-enabled/www.mysite.com.vhost server { listen 8080; server_name www.mysite.com mysite.com.net; root /var/www/www.mysite.com/web; if ($http_host != "www.mysite.com") { rewrite ^ http://www.mysite.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; location ~* \.(jpg|jpeg|png|gif|css|js|ico)$ { expires max; log_not_found off; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.2:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } include /var/www/www.mysite.com/web/nginx.conf; location ~ /nginx.conf { deny all; access_log off; log_not_found off; } } /etc/varnish/default.vcl # This is a basic VCL configuration file for varnish. See the vcl(7) # man page for details on VCL syntax and semantics. # # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.2"; .port = "8080"; # .connect_timeout = 600s; #.first_byte_timeout = 600s; # .between_bytes_timeout = 600s; # .max_connections = 800; Note: uncommenting the last four options at default.vcl made no difference. cat /etc/default/varnish # Configuration file for varnish # # /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK # to be set from this shell script fragment. # # Should we start varnishd at boot? Set to "yes" to enable. START=yes # Maximum number of open files (for ulimit -n) NFILES=131072 # Maximum locked memory size (for ulimit -l) # Used for locking the shared memory log in memory. If you increase log size, # you need to increase this number as well MEMLOCK=82000 # Default varnish instance name is the local nodename. Can be overridden with # the -n switch, to have more instances on a single server. INSTANCE=$(uname -n) # This file contains 4 alternatives, please use only one. ## Alternative 1, Minimal configuration, no VCL # # Listen on port 6081, administration on localhost:6082, and forward to # content server on localhost:8080. Use a 1GB fixed-size cache file. # # DAEMON_OPTS="-a :6081 \ # -T localhost:6082 \ # -b localhost:8080 \ # -u varnish -g varnish \ # -S /etc/varnish/secret \ # -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" ## Alternative 2, Configuration with VCL # # Listen on port 6081, administration on localhost:6082, and forward to # one content server selected by the vcl file, based on the request. Use a 1GB # fixed-size cache file. # DAEMON_OPTS="-a :80 \ -T 127.0.0.2:6082 \ -f /etc/varnish/default.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" If you need any other info let me know. I am all out of clue as to whats the problem.

    Read the article

  • MySQL 5.1.49 freezing every two days

    - by maximus
    Hi all, our mysql system is "freezing" every two days. By "freezing" i mean the following: it doesn't respond to ping we can't login with SSH we don't get any answer from MySQL there is no entry in the error logs! neither from linux neither from MySQL. we have already changed to a completely new hardware, we have the same problem, so it's definitely not a hardware problem. we do not have any other software installed except a firewall (iptables rule) we can restart the server from another server using rsyslog (www.rsyslog.com)(software reset) Could someone help me, by giving me some pointers what could i do to figure out the problem? I have included every detail about our settings. Thank you in advance for your help. Max. Our system parameters and settings: System-Memory: 12GB Processor: Intel 7-920 Quadcore Operating system: Debian 5 (lenny) 64bit MySQL 5.1.49 Databases: (a) a small phpbb forum (b) a 6GB database 3 tables with about 15 million rows my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = our-ip-address # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 256K thread_cache_size = 32 max_connections = 300 table_cache = 2048 #thread_concurrency = 4 # Used for InnoDB tables recommended to 50%-80% available memory innodb_buffer_pool_size = 6G # 20MB sometimes larger innodb_additional_mem_pool_size = 20M # 8M-16M is good for most situations innodb_log_buffer_size = 8M # Disable XA support because we do not use it innodb-support-xa = 0 # 1 is default wich is 100% secure but 2 offers better performance innodb_flush_log_at_trx_commit = 1 innodb_flush_method = O_DIRECT #innodb_thread_concurency = 8 # Recommended 64M - 512M depending on server size innodb_log_file_size = 512M # One file per table innodb_file_per_table # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M #query_cache_type = 1 #query_cache_min_res_unit= 2K #join_buffer_size = 1M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 log_bin = /var/log/mysql/mysql-bin.log # WARNING: Using expire_logs_days without bin_log crashes the server! See README.Debian! expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # * InnoDB plugin # As of MySQL 5.1.38, the InnoDB plugin from Oracle is included in the MySQL source code. # It has many improvements and better performances than the built-in InnoDB storage engine. # Please read http://www.innodb.com/products/innodb_plugin/ for more information. # Uncommenting the two following lines to use the InnoDB plugin. ignore_builtin_innodb plugin-load=innodb=ha_innodb_plugin.so # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # !includedir /etc/mysql/conf.d/ UPDATE After installing sysstat and configuring it to collect data after every minute i have the following datas. I used sar to generate the following output: The log-file is too big so coudn't enter it here but uploaded to box.net. The link is http://www.box.net/shared/xc6rh7qqob SECOND UPDATE We started a ping command in the background, and that solved the problem. Now the server does work since more then a week. We still don't know what's the problem.

    Read the article

  • Confirm disk is broken when it passes all diagnostics

    - by Halfgaar
    I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

    Read the article

  • pasenger does not start puppet master under nginx

    - by Anadi Misra
    On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user.

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

    - by Hammer Bro.
    Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

  • How to upload video on YouTube with Ruby

    - by viatropos
    I am trying to upload a youtube video using the GData gem (I have seen the youtube_g gem but would like to make it work with pure GData if possible), but I keep getting this error: GData::Client::BadRequestError in 'MyProject::Google::YouTube should upload the actual video to youtube (once it does, mock this test out)' request error 400: No file found in upload request. I am using this code: def metadata data = <<-EOF <?xml version="1.0"?> <entry xmlns="http://www.w3.org/2005/Atom" xmlns:media="http://search.yahoo.com/mrss/" xmlns:yt="http://gdata.youtube.com/schemas/2007"> <media:group> <media:title type="plain">Bad Wedding Toast</media:title> <media:description type="plain"> I gave a bad toast at my friend's wedding. </media:description> <media:category scheme="http://gdata.youtube.com/schemas/2007/categories.cat">People</media:category> <media:keywords>toast, wedding</media:keywords> </media:group> </entry> EOF end @yt = GData::Client::YouTube.new @yt.clientlogin("name", "pass") @yt.developer_key = "myKey" url = "http://uploads.gdata.youtube.com/feeds/api/users/name/uploads" mime_type = "multipart/related" file_path = "sample_upload.mp4" @yt.post_file(url, file_path, mime_type, metadata) What is the recommended/standard way for uploading videos to youtube with ruby, what is your method? Update After applying the changes to wrapped_entry, the string it produces looks like this: --END_OF_PART_59003 Content-Type: application/atom+xml; charset=UTF-8 <?xml version="1.0"?> <entry xmlns="http://www.w3.org/2005/Atom" xmlns:media="http://search.yahoo.com/mrss/" xmlns:yt="http://gdata.youtube.com/schemas/2007"> <media:group> <media:title type="plain">Bad Wedding Toast</media:title> <media:description type="plain"> I gave a bad toast at my friend's wedding. </media:description> <media:category scheme="http://gdata.youtube.com/schemas/2007/categories.cat">People</media:category> <media:keywords>toast, wedding</media:keywords> </media:group> </entry> --END_OF_PART_59003 Content-Type: multipart/related Content-Transfer-Encoding: binary ... and inspecting the request and response looks like this: Request: <GData::HTTP::Request:0x1b8bb44 @method=:post @url="http://uploads.gdata.youtube.com/feeds/api/users/lancejpollard/uploads" @body=#<GData::HTTP::MimeBody:0x1b8c738 @parts=[#<GData::HTTP::MimeBodyString:0x1b8c058 @bytes_read=0 @string="--END_OF_PART_30909\r\nContent-Type: application/atom+xml; charset=UTF-8\r\n\r\n <?xml version=\"1.0\"?>\n<entry xmlns=\"http://www.w3.org/2005/Atom\"\n xmlns:media=\"http://search.yahoo.com/mrss/\"\n xmlns:yt=\"http://gdata.youtube.com/schemas/2007\">\n <media:group>\n <media:title type=\"plain\">Bad Wedding Toast</media:title>\n <media:description type=\"plain\">\n I gave a bad toast at my friend's wedding.\n </media:description>\n <media:category scheme=\"http://gdata.youtube.com/schemas/2007/categories.cat\">People</media:category>\n <media:keywords>toast wedding</media:keywords>\n </media:group>\n</entry> \n\r\n--END_OF_PART_30909\r\nContent-Type: multipart/related\r\nContent-Transfer-Encoding: binary\r\n\r\n"> #<File:/Users/Lance/Documents/Development/git/thing/spec/fixtures/sample_upload.mp4> #<GData::HTTP::MimeBodyString:0x1b8c044 @bytes_read=0 @string="\r\n--END_OF_PART_30909--"] @current_part=0 @boundary="END_OF_PART_30909" @headers={"Slug"="sample_upload.mp4" "User-Agent"="GoogleDataRubyUtil-AnonymousApp" "GData-Version"="2" "X-GData-Key"="key=AI39si7jkhs_ECjF4unOQz8gpWGSKXgq0KJpm8wywkvBSw4s8oJd5p5vkpvURHBNh-hiYJtoKwQqSfot7KoCkeCE32rNcZqMxA" "Content-Type"="multipart/related; boundary=\"END_OF_PART_30909\"" "MIME-Version"="1.0"} Response: #<GData::HTTP::Response:0x1b897e0 @body="No file found in upload request." @headers={"cache-control"=>"no-cache no-store must-revalidate" "connection"=>"close" "expires"=>"Fri 01 Jan 1990 00:00:00 GMT" "content-type"=>"text/plain; charset=utf-8" "date"=>"Fri 11 Dec 2009 02:10:25 GMT" "server"=>"Upload Server Built on Nov 30 2009 13:21:18 (1259616078)" "x-xss-protection"=>"0" "content-length"=>"32" "pragma"=>"no-cache"} @status_code=400> Still not working, I'll have to check it out more with those changes.

    Read the article

  • Tomcat stops responding to JK requests

    - by Bruno Reis
    Hello. I have a nasty issue with load-balanced Tomcat servers that are hanging up. Any help would be greatly appreciated. The system I'm running Tomcat 6.0.26 on HotSpot Server 14.3-b01 (Java 1.6.0_17-b04) on three servers sitting behind another server that acts as load balancer. The load balancer runs Apache (2.2.8-1) + MOD_JK (1.2.25). All of the servers are running Ubuntu 8.04. The Tomcat's have 2 connectors configured: an AJP one, and a HTTP one. The AJP is to be used with the load balancer, while the HTTP is used by the dev team to directly connect to a chosen server (if we have a reason to do so). I have Lambda Probe 1.7b installed on the Tomcat servers to help me diagnose and fix the problem soon to be described. The problem Here's the problem: after about 1 day the application servers are up, JK Status Manager starts reporting status ERR for, say, Tomcat2. It will simply get stuck on this state, and the only fix I've found so far is to ssh the box and restart Tomcat. I must also mention that JK Status Manager takes a lot longer to refresh when there's a Tomcat server in this state. Finally, the "Busy" count of the stuck Tomcat on JK Status Manager is always high, and won't go down per se -- I must restart the Tomcat server, wait, then reset the worker on JK. Analysis Since I have 2 connectors on each Tomcat (AJP and HTTP), I still can connect to the application through the HTTP one. The application works just fine like this, very, very fast. That is perfectly normal, since I'm the only one using this server (as JK stopped delegating requests to this Tomcat). To try to better understand the problem, I've taken a thread dump from a Tomcat which is not responding anymore, and from another one that has been restarted recently (say, 1 hour before). The instance that is responding normally to JK shows most of the TP-ProcessorXXX threads in "Runnable" state, with the following stack trace: java.net.SocketInputStream.socketRead0 ( native code ) java.net.SocketInputStream.read ( SocketInputStream.java:129 ) java.io.BufferedInputStream.fill ( BufferedInputStream.java:218 ) java.io.BufferedInputStream.read1 ( BufferedInputStream.java:258 ) java.io.BufferedInputStream.read ( BufferedInputStream.java:317 ) org.apache.jk.common.ChannelSocket.read ( ChannelSocket.java:621 ) org.apache.jk.common.ChannelSocket.receive ( ChannelSocket.java:559 ) org.apache.jk.common.ChannelSocket.processConnection ( ChannelSocket.java:686 ) org.apache.jk.common.ChannelSocket$SocketConnection.runIt ( ChannelSocket.java:891 ) org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run ( ThreadPool.java:690 ) java.lang.Thread.run ( Thread.java:619 ) The instance that is stuck show most (all?) of the TP-ProcessorXXX threads in "Waiting" state. These have the following stack trace: java.lang.Object.wait ( native code ) java.lang.Object.wait ( Object.java:485 ) org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run ( ThreadPool.java:662 ) java.lang.Thread.run ( Thread.java:619 ) I don't know of the internals of Tomcat, but I would infer that the "Waiting" threads are simply threads sitting on a thread pool. So, if they are threads waiting inside of a thread pool, why wouldn't Tomcat put them to work on processing requests from JK? Solution? So, as I've stated before, the only fix I've found is to stop the Tomcat instance, stop the JK worker, wait the latter's busy count slowly go down, start Tomcat again, and enable the JK worker once again. What is causing this problem? How should I further investigate it? What can I do to solve it? Thanks in advance.

    Read the article

  • solved: passenger(mod_rails) fails to start puppet master under nginx

    - by Anadi Misra
    On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user. Solved The simple solution to my complicated problem was that I had placed the config.ru in wrong place moved it to /etc/puppet/rack , it was in /etc/puppet/rack/public Well!!! :-/

    Read the article

  • Unable to find valid certification path to requested target while CAS authentication

    - by Dmitriy Sukharev
    I'm trying to configure CAS authentication. It requires both CAS and client application to use HTTPS protocol. Unfortunately we should use self-signed certificate (with CN that doesn't have anything in common with our server). Also the server is behind firewall and we have only two ports (ssh and https) visible. As far as there're several application that should be visible externally, we use Apache for ajp reverse proxying requests to these applications. Secure connections are managed by Apache, and all Tomcat are not configured to work with SSL. But I obtained exception while authentication, therefore desided to set keystore in CATALINA_OPTS: export CATALINA_OPTS="-Djavax.net.ssl.keyStore=/path/to/tomcat/ssl/cert.pfx -Djavax.net.ssl.keyStoreType=PKCS12 -Djavax.net.ssl.keyStorePassword=password -Djavax.net.ssl.keyAlias=alias -Djavax.net.debug=ssl" cert.pfx was obtained from certificate and key that are used by Apache HTTP Server: $ openssl pkcs12 -export -out /path/to/tomcat/ssl/cert.pfx -inkey /path/to/apache2/ssl/server-key.pem -in /path/to/apache2/ssl/server-cert.pem When I try to authenticate a user I obtain the following exception: Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174) ~[na:1.6.0_32] at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238) ~[na:1.6.0_32] at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:318) ~[na:1.6.0_32] Meanwhile I can see in catalina.out that Tomcat see certificate in cert.pfx and it's the same as the one that is used while authentication: 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Constructing validation url: https://external-ip/cas/proxyValidate?pgtUrl=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_proxyreceptor&ticket=ST-17-PN26WtdsZqNmpUBS59RC-cas&service=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_check 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. keyStore is : /path/to/tomcat/ssl/cert.pfx keyStore type is : PKCS12 keyStore provider is : init keystore init keymanager of type SunX509 *** found key for : 1 chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** trustStore is: /jdk-home-folder/jre/lib/security/cacerts Here is a lot of trusted CAs. Here is nothing related to our certicate or our (not trusted) CA. ... 09:11:39.731 [http-bio-8080-exec-4] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. Allow unsafe renegotiation: false Allow legacy hello messages: true Is initial handshake: true Is secure renegotiation: false %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 63, 239, 180, 32, 103, 140, 83, 7, 109, 149, 177, 80, 223, 79, 243, 244, 60, 191, 124, 139, 108, 5, 122, 238, 146, 1, 54, 218 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA, TLS_EMPTY_RENEGOTIATION_INFO_SCSV] Compression Methods: { 0 } *** http-bio-8080-exec-4, WRITE: TLSv1 Handshake, length = 75 http-bio-8080-exec-4, WRITE: SSLv2 client hello message, length = 101 http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 81 *** ServerHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 145, 237, 232, 63, 240, 104, 234, 201, 148, 235, 12, 222, 60, 75, 174, 0, 103, 38, 196, 181, 27, 226, 243, 61, 34, 7, 107, 72 } Session ID: {79, 202, 117, 79, 130, 216, 168, 38, 68, 29, 182, 82, 16, 25, 251, 66, 93, 108, 49, 133, 92, 108, 198, 23, 120, 120, 135, 151, 15, 13, 199, 87} Cipher Suite: SSL_RSA_WITH_RC4_128_SHA Compression Method: 0 Extension renegotiation_info, renegotiated_connection: <empty> *** %% Created: [Session-2, SSL_RSA_WITH_RC4_128_SHA] ** SSL_RSA_WITH_RC4_128_SHA http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 609 *** Certificate chain chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** http-bio-8080-exec-4, SEND TLSv1 ALERT: fatal, description = certificate_unknown http-bio-8080-exec-4, WRITE: TLSv1 Alert, length = 2 http-bio-8080-exec-4, called closeSocket() http-bio-8080-exec-4, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target I tried to convert our pem certificate to der format and imported it to trustedKeyStore (cacerts) (without private key), but it didn't change anything. But I'm not confident that I did it rigth. Also I must inform you that I don't know passphrase for our servier-key.pem file, and probably it differs from password for keystore created by me. OS: CentOS 6.2 Architecture: x64 Tomcat version: 7 Apache HTTP Server version: 2.4 Is there any way to make Tomcat accepts our certificate?

    Read the article

  • VFS: file-max limit 1231582 reached

    - by Rick Koshi
    I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • What is the RSA SecurID packet format?

    - by bmatthews68
    I am testing a client application that authenticates using RSA SecurID hardware tokens. The authentication is failing and I am not finding any useful information in the log files. I am using Authentication Manager 8.0 and the Java SDK. I have a traffic capture which I would like to analyze with Wireshark to and from port 5500 on the authentication agent. But I can't find the packet format searching the internet or on the the RSA SecurCare knowledge base. Can anybody direct me to the packet format? Here is an extract from the rsa_api_debug.log file which dumps the UDP payload of the request and the response: [2013-11-06 15:11:08,602] main - b.a():? - Sending 508 bytes to 192.168.10.121; contents: 5c 5 0 3 3 5 0 0 2 0 0 0 0 0 1 ea 71 ee 50 6e 45 83 95 8 39 4 72 e 55 cf cc 62 6d d5 a4 10 79 89 13 d5 23 6a c1 ab 33 8 c3 a1 91 92 93 4f 1e 4 8d 2a 22 2c d0 c3 7 fc 96 5f ba bf 0 80 60 60 9d 1d 9c b9 f3 58 4b 43 18 5f e0 6d 5e f5 f4 5d df bf 41 b9 9 ae 46 a0 a9 66 2d c7 6 f6 d7 66 f1 4 f8 ad 8a 9f 4d 7e e5 9c 45 67 16 15 33 70 f0 1 d5 c0 38 39 f5 fd 5e 15 4f e3 fe ea 70 fa 30 c9 e0 18 ab 64 a9 fe 2c 89 78 a2 96 b6 76 3e 2e a2 ae 2e e0 69 80 8d 51 9 56 80 f4 1a 73 9a 70 f3 e7 c1 49 49 c3 41 3 c6 ce 3e a8 68 71 3f 2 b2 9b 27 8e 63 ce 59 38 64 d1 75 b7 b7 1f 62 eb 4d 1d de c7 21 e0 67 85 b e6 c3 80 0 60 54 47 e ef 3 f9 33 7b 78 e2 3e db e4 8e 76 73 45 3 38 34 1e dd 43 3e 72 a7 37 72 5 34 8e f4 ba 9d 71 6c e 45 49 fa 92 a f6 b bf 5 b 4f dc bd 19 0 7e d2 ef 94 d 3b 78 17 37 d9 ae 19 3a 7e 46 7d ea e4 3a 8c e1 e5 9 50 a2 eb df f2 57 97 bc f2 c3 a7 6f 19 7f 2c 1a 3f 94 25 19 4b b2 37 ed ce 97 f ae f ec c9 f5 be f0 8f 72 1c 34 84 1b 11 25 dd 44 8b 99 75 a4 77 3d e1 1d 26 41 58 55 5f d5 27 82 c d3 2a f8 4 aa 8d 5e e4 79 0 49 43 59 27 5e 15 87 a f4 c4 57 b6 e1 f8 79 3b d3 20 69 5e d0 80 6a 6b 9f 43 79 84 94 d0 77 b6 fc f 3 22 ca b9 35 c0 e8 7b e9 25 26 7f c9 fb e4 a7 fc bb b7 75 ac 7b bc f4 bb 4f a8 80 9b 73 da 3 94 da 87 e7 94 4c 80 b3 f1 2e 5b d8 2 65 25 bb 92 f4 92 e3 de 8 ee 2 30 df 84 a4 69 a6 a1 d0 9c e7 8e f 8 71 4b d0 1c 14 ac 7c c6 e3 2a 2e 2a c2 32 bc 21 c4 2f 4d df 9a f3 10 3e e5 c5 7f ad e4 fb ae 99 bf 58 0 20 0 0 0 0 0 0 0 0 0 0 [2013-11-06 15:11:08,602] main - b.b():? - Enterring getResponse [2013-11-06 15:11:08,618] main - b.a():? - Enterring getTimeoutValue(AceRequest AceAuthV4Request[AbstractAceRequest[ hdr=AcePacketHeader[Type=92 Ver=5 AppID=3 Enc=ENCRYPT Hi-Proto=5 Opt=0 CirID=0] created=1383750668571 trailer=AcePackeTrailer[nonce=39e7a607b517c4dd crc=722833884]] user=bmatthews node-sec-req=0 wpcodes=null resp-mac=0 m-resp-mac=0 client=192.168.10.3 passcode==ZTmY|? sec-sgmt=AceSecondarySegments[ cnt=3] response=none]) [2013-11-06 15:11:08,618] main - b.a():? - acm base timeout: 5 [2013-11-06 15:11:08,618] main - b.b():? - Timeout is 5000 [2013-11-06 15:11:08,618] main - b.b():? - Current retries: 0 [2013-11-06 15:11:10,618] main - b.b():? - Received 508 bytes from 192.168.10.121; contents: 6c 5 0 3 3 6 0 0 0 0 0 1 4d 18 55 ca 18 df 84 49 70 ee 24 4a a5 c3 1c 4e 36 d8 51 ad c7 ef 49 89 6e 2e 23 b4 7e 49 73 4 15 d f4 d5 c0 bf fc 72 5b be d1 62 be e0 de 23 56 bf 26 36 7f b f0 ba 42 61 9b 6f 4b 96 88 9c e9 86 df c6 82 e5 4c 36 ee dc 1e d8 a1 0 71 65 89 dc ca ee 87 ae d6 60 c 86 1c e8 ef 9f d9 b9 4c ed 7 55 77 f3 fc 92 61 f9 32 70 6f 32 67 4d fc 17 4e 7b eb c3 c7 8c 64 3f d0 d0 c7 86 ad 4e 21 41 a2 80 dd 35 ba 31 51 e2 a0 ef df 82 52 d0 a8 43 cb 7c 51 c 85 4 c5 b2 ec 8f db e1 21 90 f5 d7 1b d7 14 ca c0 40 c5 41 4e 92 ee 3 ec 57 7 10 45 f3 54 d7 e4 e6 6e 79 89 9a 21 70 7a 3f 20 ab af 68 34 21 b7 1b 25 e1 ab d 9f cd 25 58 5a 59 b1 b8 98 58 2f 79 aa 8a 69 b9 4c c1 7d 36 28 a3 23 f5 cc 2b ab 9e f a1 79 ab 90 fd 5f 76 9f d9 86 d1 fc 4c 7a 4 24 6d de 64 f1 53 22 b0 b7 91 9a 7c a2 67 2a 35 68 83 74 6a 21 ac eb f8 a2 29 53 21 2f 5a 42 d6 26 b8 f6 7f 79 96 5 3b c2 15 3a b d0 46 42 b7 74 4e 1f 6a ad f5 73 70 46 d3 f8 e a3 83 a3 15 29 6e 68 2 df 56 5c 88 8d 6c 2f ab 11 f1 5 73 58 ec 4 5f 80 e3 ca 56 ce 8 b9 73 7c 79 fc 3 ff f1 40 97 bb e3 fb 35 d1 8d ba 23 fc 2d 27 5b f7 be 15 de 72 30 b e d6 5c 98 e8 44 bd ed a4 3d 87 b8 9b 35 e9 64 80 9a 2a 3c a2 cf 3e 39 cb f6 a2 f4 46 c7 92 99 bc f7 4a de 7e 79 9d 9b d9 34 7f df 27 62 4f 5b ef 3a 4c 8d 2e 66 11 f7 8 c3 84 6e 57 ba 2a 76 59 58 78 41 18 66 76 fd 9d cb a2 14 49 e1 59 4a 6e f5 c3 94 ae 1a ba 51 fc 29 54 ba 6c 95 57 6b 20 87 cc b8 dc 5f 48 72 9c c0 2c dd 60 56 4e 4c 6c 1d 40 bd 4 a1 10 4e a4 b1 87 83 dd 1c f2 df 4c [2013-11-06 15:11:10,618] main - a.a():? - Response status is: 1 [2013-11-06 15:11:10,618] main - a.a():? - Authenticaton failed for bmatthews ! [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown invoked [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown successful

    Read the article

  • NMap route determination on Windows 7 x64

    - by user30772
    C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

    Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256  | Next Page >