Search Results

Search found 8219 results on 329 pages for 'less'.

Page 252/329 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• What can cause my code to run slower when the server JIT is activated?

  - by durandai

  I am doing some optimizations on an MPEG decoder. To ensure my optimizations aren't breaking anything I have a test suite that benchmarks the entire codebase (both optimized and original) as well as verifying that they both produce identical results (basically just feeding a couple of different streams through the decoder and crc32 the outputs). When using the "-server" option with the Sun 1.6.0_18, the test suite runs about 12% slower on the optimized version after warmup (in comparison to the default "-client" setting), while the original codebase gains a good boost running about twice as fast as in client mode. While at first this seemed to be simply a warmup issue to me, I added a loop to repeat the entire test suite multiple times. Then execution times become constant for each pass starting at the 3rd iteration of the test, still the optimized version stays 12% slower than in the client mode. I am also pretty sure its not a garbage collection issue, since the code involves absolutely no object allocations after startup. The code consists mainly of some bit manipulation operations (stream decoding) and lots of basic floating math (generating PCM audio). The only JDK classes involved are ByteArrayInputStream (feeds the stream to the test and excluding disk IO from the tests) and CRC32 (to verify the result). I also observed the same behaviour with Sun JDK 1.7.0_b98 (only that ist 15% instead of 12% there). Oh, and the tests were all done on the same machine (single core) with no other applications running (WinXP). While there is some inevitable variation on the measured execution times (using System.nanoTime btw), the variation between different test runs with the same settings never exceeded 2%, usually less than 1% (after warmup), so I conclude the effect is real and not purely induced by the measuring mechanism/machine. Are there any known coding patterns that perform worse on the server JIT? Failing that, what options are available to "peek" under the hood and observe what the JIT is doing there?

  Read the article

• How can I force a ListView with a custom panel to re-measure when the ListView width goes below the

  - by Scott Whitlock

  Sorry for the long winded question (I'm including background here). If you just want the question, go to the end. I have a ListView with a custom Panel implementation that I'm using to implement something similar to a WrapPanel, but not quite. I'm overriding the MeasureOverride and ArrangeOverride methods in the custom panel. If I do the naive implementation of a WrapPanel in the MeasureOverride method it doesn't work when the ListView is resized. Let's say the custom panel does a measure and the constraint is a width of 100 and let's say I have 3 items that are 40 wide each. The naive approach is to return a size of 80,80 but when I resize the window that the ListView is in, down to say 75, it just turns on the horizontal scrollbar and never calls measure or arrange again (it does keep measuring and arranging if the width is greater than 80). To get around this, I hard coded the measurement to only have a width of the widest item. Then in the arrange, it gives me more space than I asked for and I use as much horizontal space as I can before wrapping. If I resize the window smaller than the smallest item in the ListView, then it turns on the scrollbar, which is great. Unfortunately this is causing a big problem when I have one of these ListViews with a custom panel nested inside of another one. The outside one works ok, but I can't get the inside one to "take as much as it needs". It always sizes to the smallest item, and the only way around it is to set the MinWidth to be something greater than zero. Anyway, stepping back for a second, I think the real way to fix this is to go back to the Naive implementation of the WrapPanel but force it to re-measure when the ListView width goes below the Size I previously returned as a measurement. That should solve my problem with the nested one. So, that's my question: I have a ListView with a custom panel If I return a measurement width on the panel and the ListView is resized to less than that width, it stops calling MeasureOverride How can I get it to continue calling MeasureOverride?

  Read the article

• MSBuild / PowerShell: Copy SQL Server 2012 database to SQL Azure via BACPAC (for Continuous Integration)

  - by giveme5minutes

  I'm creating a continuous integration MSBuild script which copies a database in on-premise SQL Server 2012 to SQL Azure. Easy right? Methods After a fair bit of research I've come across the following methods: Use PowerShell to access the DAC library directly, then use the MSBuild PowerShell extension to wrap the script. This would require installing PowerShell 3 and working out how to make the MSBuild PowerShell extension work with it, as apparently MS moved the DAC API to a different namespace in the latest version of the library. PowerShell would give direct access to the API, but may require quite a bit of boilerplate. Use the sample DAC Framework Client Side Tools, which requires compiling them myself, as the downloads available from Codeplex only include the Hosted version. It would also require fixing them to use DAC 3.0 classes as they appear to currently use an earlier version of DAC. I could then call these tools from an <Exec Command="" /> in the MSBuild script. Less boilerplate and if I hit any bumps in the road I can just make changes to the source. Processes Using whichever method, the process could be either: Export from on-premise SQL Server 2012 to local BACPAC Upload BACPAC to blog storage Import BACPAC to SQL Azure via Hosted DAC Or: Export from on-premise SQL Server 2012 to local BACPAC Import BACPAC to SQL Azure via Client DAC Question All of the above seems to be quite a lot of effort for something that seems to be a standard feature... so before I start reinventing the wheel and documenting the results for all to see, is there something really obvious that I've missed here? Is there pre-written script that MS has released that I have not yet uncovered? There's an command in the GUI of SQL Server Management Studio 2012 that does EXACTLY what I'm trying to do (right click on local database, click "Tasks", click "Deploy Database to SQL Azure"). Surely if it's a few clicks in the GUI it must be a single command on the command line somewhere??

  Read the article

• Jquery UI Datepicker disabling wrong days

  - by Nazariy

  I have run in to issue that days that have to be disabled are shifted to the next day. The idea is that day that does not exist in our booking object or have a value less than 1 should be disabled on calendar. here is simplified version of my script and demonstration on jsfiddle: var bookings = { "2012-09-01": 24, "2012-09-03": 31, "2012-09-05": 27, "2012-09-06": 9, "2012-09-07": 18, "2012-09-08": 0, "2012-09-10": 20, "2012-09-12": 19, "2012-09-13": 0, "2012-09-14": 9, "2012-09-15": 24, "2012-09-17": 19, "2012-09-19": 28, "2012-09-20": 15, "2012-09-21": 12, "2012-09-22": 25, "2012-09-24": 19, "2012-09-26": 0, "2012-09-27": 0, "2012-09-28": 0, "2012-09-29": 0 }; function MyEvent(date) { bookings = bookings || {}; this.date = date.toISOString().substr(0, 10); this.display = (typeof bookings[this.date] == 'number' && bookings[this.date] > 0); return this; } MyEvent.prototype.toArray = function () { return [this.display, null, null]; }; $(function () { $('#eventCalendar').datepicker({ dateFormat: "yy-mm-dd", firstDay: 1, defaultDate: "2012-09-24", beforeShowDay: function (date) { return new MyEvent(date).toArray(); } } ); }); Can some one suggest me what am I doing wrong or is it a bug?

  Read the article

• Fading out everything but (this) - while honoring a click()

  - by Kasper Lewau

  I'm trying to achieve a fading navigation system, where everything in the nav but the element being hovered will fade out to say, 0.3 opacity. At the same time, I want clicks to have a greater "value", so as to not fade out a clicked element (or in this case, the active subpage).. That didn't make much sense to me either, I'll just post the code I have. <nav id="main"> <ul> <li> <a>work</a> </li> <li> <a>about me</a> </li> <li> <a>contact</a> </li> </ul> </nav> And the script that makes it sparkle: var nava = "nav#main ul li a"; $(nava).hover(function(){ $(nava).not(this).removeClass().addClass("inactive"); $(this).addClass("active"); }); $(nava).click(function(){ $(this).removeClass().addClass("active"); }); }); And the classes / css(less): .inactive{color:@color2; border-bottom:0 solid #000;} .active{color:@color1; border-bottom:1px solid #000;} nav#main ul li a{color:@color1;} Basically the hover states take priority over the click, which I do not want to happen. Ideally I'd like for all of the anchor elements to revert to its original state whenever you hover out from the unordered list holding it all. If anyone has some pointers on this it'd be greatly appreciated. Cheers!

  Read the article

• why i^=j^=i^=j isn't equal to *i^=*j^=*i^=*j

  - by klvoek

  In c , when there is variables (assume both as int) i less than j , we can use the equation i^=j^=i^=j to exchange the value of the two variables. For example, let int i = 3, j = 5; after computed i^=j^=i^=j, I got i = 5, j = 3 . What is so amazing to me. But, if i use two int pointers to re-do this , with *i^=*j^=*i^=*j , use the example above what i got will be i = 0 and j = 3. Then, describe it simply: In C 1 int i=3, j=5; i^=j^=i^=j; // after this i = 5, j=3 2 int i = 3, j= 5; int *pi = &i, *pj = &j; *pi^=*pj^=*pi^=*pj; // after this, $pi = 0, *pj = 5 In JavaScript var i=3, j=5; i^=j^=i^=j; // after this, i = 0, j= 3 the result in JavaScript makes this more interesting to me my sample code , on ubuntu server 11.0 & gcc #include <stdio.h> int main(){ int i=7, j=9; int *pi=&i, *pj=&j; i^=j^=i^=j; printf("i=%d j=%d\n", i, j); i=7, j==9; *pi^=*pj^=*pi^=*pj printf("i=%d j=%d\n", *pi, *pj); } however, i had spent hours to test and find out why, but nothing means. So, please help me. Or, just only i made some mistake???

  Read the article

• Is there a way to increase performance on my simple textfilter?

  - by djerry

  Hey guys, I'm writing a filter that will pick out items. I have a list of Objects. The objects contain a number, name and some other irrelevant items. At the moment, the list contains 200 items. When typing in a textbox, i'm looking if the string matches a part of the number/name of the objects in the list. If so, add them to the listbox. Here's the code for my textbox textchanged event : private void txtTelnumber_TextChanged(object sender, TextChangedEventArgs e) { lstOverview.Items.Clear(); string data = ""; foreach (ucTelListItem telList in _allUsers) { data = telList.User.H323 + telList.user.E164; if (data.Contains(txtTelnumber.Text)) lstOverview.Items.Add(telList); } } I sometimes see a little delay when entering a character, especially when i go from 4 records to 200 records (so when i had a filter and 4 records matched, and i backspace and the whole list appears again). My list is a list of usercontrols, cause i found it takes less time to load the usercontrols from a list, then to have to initialize a new usercontrol each time. Can i do something about the code, or is it just adding the usercontrol the listbox that causes the small delay (small delay = <1 sec)? Thanks in advance.

  Read the article

• ASP MVC - Routing Required?

  - by evo_9

  I've been reading up on MVC2 which came in VS2010 and it sounds pretty interesting. I'm actually in the middle of a large multi-tenant application project, and have just started coding the UI. I'm considering changing to MVC as I'm not that far along at this point. I have some questions about the Routing capabilities, namely are they required to use MVC or can I more or less ignore Routing? Or do I have to setup a default routing record that will make things work like standard ASPX (as far as routing alone is concerned)? The reason why I don't want to use Routing is because I've already defined a custom URL 'rewrite' mechanism of my own (which fires on session_start). In addition, I'm using jquery and opens-standards for the entire UI, and MVC's aspx overhead-free approach seems like a better fit based on how I've already started to build the application (I am not using viewstate at all, for example). I guess my big concern is whether the routing can be ignored, of if I will have to re-implement my custom URL rewriting to work with MVC, and if that's the case, how would I do that? As a new Routing routine, or stick with the session_start (if that's even possible?). Lastly, I don't want to use anything even remotely 'intelligent/readable' for the url - for a site like StackOverflow, the readability of the URL is a positive, but the opposite is true if it's not a public website like this one. In fact, it would seem to me that the more friendly MVC routing URL (which indirectly show method names) could pose a security risk on a private, non-public website app like I'm developing. For all these reasons I would love to use the lightweight aspects of MVC but skip the Routing entirely - is this possible?

  Read the article

• Parsing HTTP - Bytes.length != String.length

  - by hotzen

  Hello, I consume HTTP via nio.SocketChannel, so I get chunks of data as Array[Byte]. I want to put these chunks into a parser and continue parsing after each chunk has been put. HTTP itself seems to use an ISO8859-Charset but the Payload/Body itself may be arbitrarily encoded: If the HTTP Content-Length specifies X bytes, the UTF8-decoded Body may have much less Characters (1 Character may be represented in UTF8 by 2 bytes, etc). So what is a good parsing strategy to honor an explicitly specified Content-Length and/or a Transfer-Encoding: Chunked which specifies a chunk-length to be honored. append each data-chunk to an mutable.ArrayBuffer[Byte], search for CRLF in the bytes, decode everything from 0 until CRLF to String and match with Regular-Expressions like StatusRegex, HeaderRegex, etc? decode each data-chunk with the proper charset (e.g. iso8859, utf8, etc) and add to StringBuilder. With this solution I am not able to honor any Content-Length or Chunk-Size, but.. do I have to care for it? any other solution... ?

  Read the article

• C++0x rvalue references and temporaries

  - by Doug

  (I asked a variation of this question on comp.std.c++ but didn't get an answer.) Why does the call to f(arg) in this code call the const ref overload of f? void f(const std::string &); //less efficient void f(std::string &&); //more efficient void g(const char * arg) { f(arg); } My intuition says that the f(string &&) overload should be chosen, because arg needs to be converted to a temporary no matter what, and the temporary matches the rvalue reference better than the lvalue reference. This is not what happens in GCC and MSVC. In at least G++ and MSVC, any lvalue does not bind to an rvalue reference argument, even if there is an intermediate temporary created. Indeed, if the const ref overload isn't present, the compilers diagnose an error. However, writing f(arg + 0) or f(std::string(arg)) does choose the rvalue reference overload as you would expect. From my reading of the C++0x standard, it seems like the implicit conversion of a const char * to a string should be considered when considering if f(string &&) is viable, just as when passing a const lvalue ref arguments. Section 13.3 (overload resolution) doesn't differentiate between rvalue refs and const references in too many places. Also, it seems that the rule that prevents lvalues from binding to rvalue references (13.3.3.1.4/3) shouldn't apply if there's an intermediate temporary - after all, it's perfectly safe to move from the temporary. Is this: Me misreading/misunderstand the standard, where the implemented behavior is the intended behavior, and there's some good reason why my example should behave the way it does? A mistake that the compiler vendors have somehow all made? Or a mistake based on common implementation strategies? Or a mistake in e.g. GCC (where this lvalue/rvalue reference binding rule was first implemented), that was copied by other vendors? A defect in the standard, or an unintended consequence, or something that should be clarified?

  Read the article

• How to detect if a file is PDF or TIFF ?

  - by eviljack

  Please bear with me as I've been thrown into the middle of this project without knowing all the background. If you've got WTF questions, trust me, I have them too. Here is the scenario: I've got a bunch of files residing on an IIS server. They have no file extension on them. Just naked files with names like "asda-2342-sd3rs-asd24-ut57" and so on. Nothing intuitive. The problem is I need to serve up files on an ASP.NET (2.0) page and display the tiff files as tiff and the PDF files as PDF. Unfortunately I don't know which is which and I need to be able to display them appropriately in their respective formats. For example, lets say that there are 2 files I need to display, one is tiff and one is PDF. The page should show up with a tiff image, and perhaps a link that would open up the PDF in a new tab/window. The problem: As these files are all extension-less I had to force IIS to just serve everything up as TIFF. But if I do this, the PDF files won't display. I could change IIS to force the MIME type to be PDF for unknown file extensions but I'd have the reverse problem. http://support.microsoft.com/kb/326965 Is this problem easier than I think or is it as nasty as I am expecting?

  Read the article

• VS2010 development web server does not use integrated-mode HTTP handlers/modules

  - by Domenic

  I am developing an ASP.NET MVC 2 web site, targeted for .NET Framework 4.0, using Visual Studio 2010. My web.config contains the following code: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <add name="XhtmlModule" type="DomenicDenicola.Website.XhtmlModule" /> </modules> <handlers> <add name="DotLess" type="dotless.Core.LessCssHttpHandler,dotless.Core" path="*.less" verb="*" /> </handlers> </system.webServer> When I use Build > Publish to put the web site on my local IIS7 instance, it works great. However, when I use Debug > Start Debugging, neither the HTTP handler nor module are executed on any requests. Strangely enough, when I put the handler and module <add /> tags back into <system.web /> under <httpHandlers /> and <httpModules />, they work. This seems to imply that the development web server is running in classic mode. How do I fix this?

  Read the article

• Testing ActionFilterAttributes with MSpec

  - by Tomas Lycken

  I'm currently trying to grasp MSpec, mainly to learn new ways of (T/B)DD to be able to make an educated decision on which technology to use. Previously, I've mostly (read: only) used the built-in MSTest framework with Moq, so BDD is quite new for me. I'm writing an ASP.NET MVC app, and I want to implement PRG. Last time I did this, I used action filters to export and import ModelState via TempData, so that I could return a RedirectResult and the validation errors would still be there when the user got the view. I tested that scenario by verifying two things: a) That the ExportModelStateAttribute I had written was applied (among tests for my controller) b) That the attribute worked (among tests for action filter attributes) However, in BDD I've understood I should be even more concerned with behavior, and even less with implementation. This means I should probably just verify that the model state is in tempdata when the action has finished executing - not necessarily that it's done via an attribute. To further complicate things, attributes are not run when calling the action directly in the test, so I can't just call the action and see if the job's been done. How should I spec/test this in MSpec?

  Read the article

• Wrappers of primitive types in arraylist vs arrays

  - by ismail marmoush

  Hi, In "Core java 1" I've read CAUTION: An ArrayList is far less efficient than an int[] array because each value is separately wrapped inside an object. You would only want to use this construct for small collections when programmer convenience is more important than efficiency. But in my software I've already used Arraylist instead of normal arrays due to some requirements, though "The software is supposed to have high performance and after I've read the quoted text I started to panic!" one thing I can change is changing double variables to Double so as to prevent auto boxing and I don't know if that is worth it or not, in next sample algorithm public void multiply(final double val) { final int rows = getSize1(); final int cols = getSize2(); for (int i = 0; i < rows; i++) { for (int j = 0; j < cols; j++) { this.get(i).set(j, this.get(i).get(j) * val); } } } My question is does changing double to Double makes a difference ? or that's a micro optimizing that won't affect anything ? keep in mind I might be using large matrices.2nd Should I consider redesigning the whole program again ?

  Read the article

• Logic for family tree program

  - by david robers

  Hi All, I am creating a family tree program in Java, or at least trying to. I have developed several classes: Person - getters and setter for name gender age etc FamilyMember - extends Person getters and setters for setting arents and children Family - which consists of multiple family members and methods for adding removing members FamilyTree which is the main class for setting relationships. I have two main problems: 1) I need to set the relationships between people. Currently I am doing: FamilyMember A, FamilyMember B B.setMother(A); A.setChild(B); The example above is for setting a mother child relationship. This seems very clunky. Its getting very long winded to implement all relationships. Any ideas on how to implement multiple relationships in a less prodcedural way? 2) I have to be able to display the family tree. How can I do this? Are there any custom classes out there to make life easier? Thanks for your time...

  Read the article

• What if you used the wrong language?

  - by HS

  A reply to another question made me remember a project from some years ago when it turned out that Java was not the right tool to use. I typically only learn a new language when I have a problem that it solves better than the ones I already know. [...] Then I write whatever program I wanted to learn that language for in the first place. [...] By the time I've gotten my target program written, I've usually got a decent handle on the language, not to mention any other features it has, and I've got other ideas to use it for. I did just that back then with Java, because the client thought it to be the right language to use (platform independent) and initial evaluation confirmed that. However, much later in the project there were some issue (can't really remember all the details by now). So, the project that started as a nice learning experience turned into a nightmare toward the end. I was at the brink of switching over to my trusted C++ and doing a complete rewrite. The client was not so much of a problem to convince back then, but my supervisor was strongly opposed because of all the work that already went into the Java version. In hindsight, he was right and the project was complete more or less with the intended features kind of working, but it was the project that I am least proud of by now. Long story short: what do you think, when is it too much and the switch to another technology is worthwhile? I personally would estimate the point of no return to be around 50% of the planned effort, but really want to know, if anyone has real experience with such a switch. And to answer the inevitable question: I do not really care, if the technology switched to is proven or another new thing. The latter would basically need more initial scrutiny based on the past experiences in the problematic project.

  Read the article

• Practical non-image based CAPTCHA approaches?

  - by Jeff Atwood

  It looks like we'll be adding CAPTCHA support to Stack Overflow. This is necessary to prevent bots, spammers, and other malicious scripted activity. We only want human beings to post or edit things here! We'll be using a JavaScript (jQuery) CAPTCHA as a first line of defense: http://docs.jquery.com/Tutorials:Safer_Contact_Forms_Without_CAPTCHAs The advantage of this approach is that, for most people, the CAPTCHA won't ever be visible! However, for people with JavaScript disabled, we still need a fallback and this is where it gets tricky. I have written a traditional CAPTCHA control for ASP.NET which we can re-use. However, I'd prefer to go with something textual to avoid the overhead of creating all these images on the server with each request. I've seen things like.. ASCII text captcha: \/\/(_)\/\/ math puzzles: what is 7 minus 3 times 2? trivia questions: what tastes better, a toad or a popsicle? Maybe I'm just tilting at windmills here, but I'd like to have a less resource intensive, non-image based <noscript> compatible CAPTCHA if possible. Ideas?

  Read the article

• Vim - show diff on commit in mercurial;

  - by JackLeo

  In my .hgrc I can provide an editor or a command to launch an editor with options on commit. I want to write a method or alias that launches $ hg ci, it would not only open up message in Vim, but also would split window and there print out $ hg diff. I know that I can give parameters to vim by using +{command} option. So launching $ vim "+vsplit" does the split but any other options goes to first opened window. So I assume i need a specific function, yet I have no experience in writing my own Vim scripts. The script should: Open new vertical split with empty buffer (with vnew possibly) In empty buffer launch :.!hg diff Set empty buffer file type as diff :set ft=diff I've written such function: function! HgCiDiff() vnew :.!hg diff set ft=diff endfunction And in .hgrc I've added option: editor = vim "+HgCiDiff()" It kind of works, but I would like that splited window would be in right side (now it opens up in left) and mercurial message would be focused window. Also :wq could be setted as temporary shortcut to :wq<CR>:q! (having an assumption that mercurial message is is focused). Any suggestions to make this a bit more useful and less chunky? UPDATE: I found vim split guide so changing vnew with rightbelow vnew opens up diff on the right side.

  Read the article

• Load SQL query result data into cache in advance

  - by Marc

  I have the following situation: .net 3.5 WinForm client app accessing SQL Server 2008 Some queries returning relatively big amount of data are used quite often by a form Users are using local SQL Express and restarting their machines at least daily Other users are working remotely over slow network connections The problem is that after a restart, the first time users open this form the queries are extremely slow and take more or less 15s on a fast machine to execute. Afterwards the same queries take only 3s. Of course this comes from the fact that no data is cached and must be loaded from disk first. My question: Would it be possible to force the loading of the required data in advance into SQL Server cache? Note My first idea was to execute the queries in a background worker when the application starts, so that when the user starts the form the queries will already be cached and execute fast directly. I however don't want to load the result of the queries over to the client as some users are working remotely or have otherwise slow networks. So I thought just executing the queries from a stored procedure and putting the results into temporary tables so that nothing would be returned. Turned out that some of the result sets are using dynamic columns so I couldn't create the corresponding temp tables and thus this isn't a solution. Do you happen to have any other idea?

  Read the article

• Why does a sub-class class of a class have to be static in order to initialize the sub-class in the

  - by Alex

  So, the question is more or less as I wrote. I understand that it's probably not clear at all so I'll give an example. I have class Tree and in it there is the class Node, and the empty constructor of Tree is written: public class RBTree { private RBNode head; public RBTree(RBNode head,RBTree leftT,RBTree rightT){ this.head=head; this.head.leftT.head.father = head; this.head.rightT.head.father = head; } public RBTree(RBNode head){ this(head,new RBTree(),new RBTree()); } public RBTree(){ this(new RBNode(),null,null); } public class RBNode{ private int value; private boolean isBlack; private RBNode father; private RBTree leftT; private RBTree rightT; } } Eclipse gives me the error: "No enclosing instance of type RBTree is available due to some intermediate constructor invocation" for the "new RBTree()" in the empty constructor. However, if I change the RBNode to be a static class, there is no problem. So why is it working when the class is static. BTW, I found an easy solution for the cunstructor: public RBTree(){ this.head = new RBNode(); } So, I have no idea what is the problem in the first piece of code.

  Read the article

• stealing inside the move constructor

  - by FredOverflow

  During the implementation of the move constructor of a toy class, I noticed a pattern: array2D(array2D&& that) { data_ = that.data_; that.data_ = 0; height_ = that.height_; that.height_ = 0; width_ = that.width_; that.width_ = 0; size_ = that.size_; that.size_ = 0; } The pattern obviously being: member = that.member; that.member = 0; So I wrote a preprocessor macro to make stealing less verbose and error-prone: #define STEAL(member) member = that.member; that.member = 0; Now the implementation looks as following: array2D(array2D&& that) { STEAL(data_); STEAL(height_); STEAL(width_); STEAL(size_); } Are there any downsides to this? Is there a cleaner solution that does not require the preprocessor?

  Read the article

• SQL Queries SELECT IN and SELECT NOT IN

  - by Sequenzia

  Does anyone know why the results of the following 2 queries do not add up to the results of the 3rd one? SELECT COUNT(leadID) FROM leads WHERE makeID NOT IN (SELECT uploadDataMapID FROM DG_App.dbo.uploadData WHERE uploadID = 3 AND uploadRowID = 1) AND modelID NOT IN (SELECT uploadDataMapID FROM DG_App.dbo.uploadData WHERE uploadID = 3 AND uploadRowID = 2) SELECT COUNT(leadID) FROM Leads WHERE makeID IN (SELECT uploadDataMapID FROM DG_App.dbo.uploadData WHERE uploadID = 3 AND uploadRowID = 1) OR modelID IN (SELECT uploadDataMapID FROM DG_App.dbo.uploadData WHERE uploadID = 3 AND uploadRowID = 2) SELECT COUNT(leadID) FROM Leads The first query is the count I need. The second one is to tell the user how many records were suppressed based on the contents of the DG_App.dbo.uploadData table. The third query is just a straight count of all the records. When I run these the results of query 1 + the results of query 2 comes up about 46K records less than the count of the entire table. I have played with grouping the WHERE statements with () but that did not change the counts at all. This is MSSQL Server 2012. Any input on this would be great. Thanks

  Read the article

• Ajax with Jsf 1.1 implementation

  - by Rohan Ved

  I am using JSF1.1 in that, have this code_ <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%> <%@ taglib uri="http://www.azureworlds.org" prefix="azure"%> <%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="x"%> <%@ taglib uri="http://www.asifqamar.com/jsf/asif" prefix="a"%> ... <x:selectOneMenu value="#{hotelBean.state}"> <f:selectItem itemLabel="Select One" itemValue="" /> <f:selectItem value="#{hotelBean.mapStates }" /> <x:ajax update="city" listener="#{hotelBean.handleCityChange}" /> </x:selectOneMenu> <h:outputText value="City* " /> <x:selectOneMenu id="city" value="#{hotelBean.city}"> <f:selectItem itemLabel="Select One" itemValue="" /> <f:selectItem value="#{hotelBean.mapCities }" /> </x:selectOneMenu> line x:ajax update="city" listener="#{hotelBean.handleCityChange}" is not working , i searched but got JSF1.1 not support for Ajax. then what can i do for this? and i have less knowledge of JS. Thanx

  Read the article

• Turning on multiple result sets in an ODBC connection to SQL Server

  - by David Griffiths

  I have an application that originally needed to connect to Sybase (via ODBC), but I've needed to add the ability to connect to SQL Server as well. As ODBC should be able to handle both, I thought I was in a good position. Unfort, SQL Server will not let me, by default, nest ODBC commands and ODBCDataReaders - it complains the connection is busy. I know that I had to specify that multiple active result sets (MARS) were allowed in similar circumstances when connecting to SQL Server via a native driver, so I thought it wouldn't be an issue. The DSN wizard has no entr y when creating a SystemDSN. Some people have provided registry hacks to get around this, but this did not work (add a MARS_Connection with a value of Yes to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\system-dsn-name). Another suggestion was to create a file-dsn, and add "MARS_Connection=YES" to that. Didn't work. Finally, a DSN-less connection string. I've tried this one (using MultipleActiveResultSets - same variable as a Sql Server connection would use), "Driver={SQL Native Client};Server=xxx.xxx.xxx.xxx;Database=someDB;Uid=u;Pwd=p;MultipleActiveResultSets=True;" and this one: "Driver={SQL Native Client};Server=192.168.75.33\\ARIA;Database=Aria;Uid=sa;Pwd=service;MARS_Connection=YES;" I have checked the various connection-string sites - they all suggest what I've already tried.

  Read the article

• How to "reduce" a hash?

  - by Julien Lebosquain

  Suppose I have any "long" hash, like a 16 bytes MD5 or a 20 bytes SHA1. I want to reduce this hash to fit on 4 bytes, for GetHashCode() purposes. First, I'm perfectly aware that I'll get more collisions. That's totally fine in my case, but I'd still prefer to get the less possible collisions. There are several solutions to my problem: I could take the 4 first bytes of the hash. I could take the 4 last bytes of the hash. I could take 4 random bytes of the hash. I could generate a hash of the hash, involving classic prime numbers multiplications. Are there other solutons I didn't think about? And more importantly, what method will give me the most unique hash code? I'm currently supposing they're almost equivalent. Microsoft choose that the public key token of an assembly is the last 8 bytes of the SHA1 hash of its public key, so I'll probably go for this solution but I'd like to know why.

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >