Search Results

Search found 39866 results on 1595 pages for '2012 end of the world'.

Page 253/1595 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

• Formal separation marker of syslog events?

  - by Server Horror

  I've been looking at RFC5424 to find the formally specified marker that will end a syslog event. Unfortunately I couldn't find it. So If I wanted to implement some small syslog server that reacts on certain messages what is the marker that ends a message (yes commonly an event is a single line, but I just couldn't find it in the specification) Clarification: I call it event because I associate a message with a single line. An event could possibly be some thing like Type: foo Source: webservers whereas a message to me is this: Type: foo Source: webservers http://tools.ietf.org/html/rfc5424#section-6 defines: SYSLOG-MSG = HEADER SP STRUCTURED-DATA [SP MSG] neither STRUCTURED-DATA nor MSG tell me how these fields end. Especially MSG is defined as as MSG-ANY / MSG-UTF8 which expands to virtually anything. There's nothing that says a newline marks the end (or an 8 or an a for that matter). Given the example messages (section 6.5): This is one valid message, or 2 valid messages depending on wether you say that a HEADER element must never occur in any MSG element: literal whitespace <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 - <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 | is this an end marker? \t stands for a tab <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 -\t<34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 | is this an end marker? \n stands for a newline <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 -\n<34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 | is this an end marker? Either I'm misreading the RFC or there just isn't any mention. The sizes specified in the RFC just say what the minimum length is expected that I can work with...

  Read the article

• Performance-optimizing Oracle 10g on a server that is also a Tomcat JSP app server?

  - by PKHunter

  I have inherited a simple RedHat 5 - 64bit platform. It has SCSI disks on RAID1, with 16GB of RAM. Double Core CPU. Oracle 10g, Release 2. This would be a decent platform for running the DB only, perhaps, but the same server in an "A-A mode" clustering (very simple) also runs Tomcat and there are several Java servlets running on this. Sadly there is no caching platform etc. We only use an external CDN for some html caching. I am personally more familiar with web environments on the LAMPP platform (apache, php, mysql, postgresql). PROBLEM: Because the server has both Tomcat JSP/Java and Oracle 10g running on the same server, with no caching, I have some issues of the server going down. Often, sadly. QUESTION: What are my options in terms of improving performance of all these different apps? Connection Pooling? Example, in Postgresql world we have PgBouncer, which really helps things. Does Oracle have something similar? Or is there a famous Java-based external pooler that people use in production environments? (I'm not familiar with Java) Any "SQL cache" as in the MySQL and Postgresql world? Any other kind of application cache, as "APC" or "eAccelarator" in the PHP world? The "OSCache" stuff from the Java world (JSP thingie I found on Google: http://onjava.com/pub/a/onjava/2005/01/05/jspcache.html?page=2) ... What else? Sorry if this is a noob question. I have googled and googled, but problem is I don't know what to google for, other than the broad general concepts above. So if not full answers, I would even appreciate basic pointers and I am happy to JFGI myself. Thanks!

  Read the article

• how to export bind and keyframe bone poses from blender to use in OpenGL

  - by SaldaVonSchwartz

  EDIT: I decided to reformulate the question in much simpler terms to see if someone can give me a hand with this. Basically, I'm exporting meshes, skeletons and actions from blender into an engine of sorts that I'm working on. But I'm getting the animations wrong. I can tell the basic motion paths are being followed but there's always an axis of translation or rotation which is wrong. I think the problem is most likely not in my engine code (OpenGL-based) but rather in either my misunderstanding of some part of the theory behind skeletal animation / skinning or the way I am exporting the appropriate joint matrices from blender in my exporter script. I'll explain the theory, the engine animation system and my blender export script, hoping someone might catch the error in either or all of these. The theory: (I'm using column-major ordering since that's what I use in the engine cause it's OpenGL-based) Assume I have a mesh made up of a single vertex v, along with a transformation matrix M which takes the vertex v from the mesh's local space to world space. That is, if I was to render the mesh without a skeleton, the final position would be gl_Position = ProjectionMatrix * M * v. Now assume I have a skeleton with a single joint j in bind / rest pose. j is actually another matrix. A transform from j's local space to its parent space which I'll denote Bj. if j was part of a joint hierarchy in the skeleton, Bj would take from j space to j-1 space (that is to its parent space). However, in this example j is the only joint, so Bj takes from j space to world space, like M does for v. Now further assume I have a a set of frames, each with a second transform Cj, which works the same as Bj only that for a different, arbitrary spatial configuration of join j. Cj still takes vertices from j space to world space but j is rotated and/or translated and/or scaled. Given the above, in order to skin vertex v at keyframe n. I need to: take v from world space to joint j space modify j (while v stays fixed in j space and is thus taken along in the transformation) take v back from the modified j space to world space So the mathematical implementation of the above would be: v' = Cj * Bj^-1 * v. Actually, I have one doubt here.. I said the mesh to which v belongs has a transform M which takes from model space to world space. And I've also read in a couple textbooks that it needs to be transformed from model space to joint space. But I also said in 1 that v needs to be transformed from world to joint space. So basically I'm not sure if I need to do v' = Cj * Bj^-1 * v or v' = Cj * Bj^-1 * M * v. Right now my implementation multiples v' by M and not v. But I've tried changing this and it just screws things up in a different way cause there's something else wrong. Finally, If we wanted to skin a vertex to a joint j1 which in turn is a child of a joint j0, Bj1 would be Bj0 * Bj1 and Cj1 would be Cj0 * Cj1. But Since skinning is defined as v' = Cj * Bj^-1 * v , Bj1^-1 would be the reverse concatenation of the inverses making up the original product. That is, v' = Cj0 * Cj1 * Bj1^-1 * Bj0^-1 * v Now on to the implementation (Blender side): Assume the following mesh made up of 1 cube, whose vertices are bound to a single joint in a single-joint skeleton: Assume also there's a 60-frame, 3-keyframe animation at 60 fps. The animation essentially is: keyframe 0: the joint is in bind / rest pose (the way you see it in the image). keyframe 30: the joint translates up (+z in blender) some amount and at the same time rotates pi/4 rad clockwise. keyframe 59: the joint goes back to the same configuration it was in keyframe 0. My first source of confusion on the blender side is its coordinate system (as opposed to OpenGL's default) and the different matrices accessible through the python api. Right now, this is what my export script does about translating blender's coordinate system to OpenGL's standard system: # World transform: Blender -> OpenGL worldTransform = Matrix().Identity(4) worldTransform *= Matrix.Scale(-1, 4, (0,0,1)) worldTransform *= Matrix.Rotation(radians(90), 4, "X") # Mesh (local) transform matrix file.write('Mesh Transform:\n') localTransform = mesh.matrix_local.copy() localTransform = worldTransform * localTransform for col in localTransform.col: file.write('{:9f} {:9f} {:9f} {:9f}\n'.format(col[0], col[1], col[2], col[3])) file.write('\n') So if you will, my "world" matrix is basically the act of changing blenders coordinate system to the default GL one with +y up, +x right and -z into the viewing volume. Then I also premultiply (in the sense that it's done by the time we reach the engine, not in the sense of post or pre in terms of matrix multiplication order) the mesh matrix M so that I don't need to multiply it again once per draw call in the engine. About the possible matrices to extract from Blender joints (bones in Blender parlance), I'm doing the following: For joint bind poses: def DFSJointTraversal(file, skeleton, jointList): for joint in jointList: bindPoseJoint = skeleton.data.bones[joint.name] bindPoseTransform = bindPoseJoint.matrix_local.inverted() file.write('Joint ' + joint.name + ' Transform {\n') translationV = bindPoseTransform.to_translation() rotationQ = bindPoseTransform.to_3x3().to_quaternion() scaleV = bindPoseTransform.to_scale() file.write('T {:9f} {:9f} {:9f}\n'.format(translationV[0], translationV[1], translationV[2])) file.write('Q {:9f} {:9f} {:9f} {:9f}\n'.format(rotationQ[1], rotationQ[2], rotationQ[3], rotationQ[0])) file.write('S {:9f} {:9f} {:9f}\n'.format(scaleV[0], scaleV[1], scaleV[2])) DFSJointTraversal(file, skeleton, joint.children) file.write('}\n') Note that I'm actually grabbing the inverse of what I think is the bind pose transform Bj. This is so I don't need to invert it in the engine. Also note I went for matrix_local, assuming this is Bj. The other option is plain "matrix", which as far as I can tell is the same only that not homogeneous. For joint current / keyframe poses: for kfIndex in keyframes: bpy.context.scene.frame_set(kfIndex) file.write('keyframe: {:d}\n'.format(int(kfIndex))) for i in range(0, len(skeleton.data.bones)): file.write('joint: {:d}\n'.format(i)) currentPoseJoint = skeleton.pose.bones[i] currentPoseTransform = currentPoseJoint.matrix translationV = currentPoseTransform.to_translation() rotationQ = currentPoseTransform.to_3x3().to_quaternion() scaleV = currentPoseTransform.to_scale() file.write('T {:9f} {:9f} {:9f}\n'.format(translationV[0], translationV[1], translationV[2])) file.write('Q {:9f} {:9f} {:9f} {:9f}\n'.format(rotationQ[1], rotationQ[2], rotationQ[3], rotationQ[0])) file.write('S {:9f} {:9f} {:9f}\n'.format(scaleV[0], scaleV[1], scaleV[2])) file.write('\n') Note that here I go for skeleton.pose.bones instead of data.bones and that I have a choice of 3 matrices: matrix, matrix_basis and matrix_channel. From the descriptions in the python API docs I'm not super clear which one I should choose, though I think it's the plain matrix. Also note I do not invert the matrix in this case. The implementation (Engine / OpenGL side): My animation subsystem does the following on each update (I'm omitting parts of the update loop where it's figured out which objects need update and time is hardcoded here for simplicity): static double time = 0; time = fmod((time + elapsedTime),1.); uint16_t LERPKeyframeNumber = 60 * time; uint16_t lkeyframeNumber = 0; uint16_t lkeyframeIndex = 0; uint16_t rkeyframeNumber = 0; uint16_t rkeyframeIndex = 0; for (int i = 0; i < aClip.keyframesCount; i++) { uint16_t keyframeNumber = aClip.keyframes[i].number; if (keyframeNumber <= LERPKeyframeNumber) { lkeyframeIndex = i; lkeyframeNumber = keyframeNumber; } else { rkeyframeIndex = i; rkeyframeNumber = keyframeNumber; break; } } double lTime = lkeyframeNumber / 60.; double rTime = rkeyframeNumber / 60.; double blendFactor = (time - lTime) / (rTime - lTime); GLKMatrix4 bindPosePalette[aSkeleton.jointsCount]; GLKMatrix4 currentPosePalette[aSkeleton.jointsCount]; for (int i = 0; i < aSkeleton.jointsCount; i++) { F3DETQSType& lPose = aClip.keyframes[lkeyframeIndex].skeletonPose.joints[i]; F3DETQSType& rPose = aClip.keyframes[rkeyframeIndex].skeletonPose.joints[i]; GLKVector3 LERPTranslation = GLKVector3Lerp(lPose.t, rPose.t, blendFactor); GLKQuaternion SLERPRotation = GLKQuaternionSlerp(lPose.q, rPose.q, blendFactor); GLKVector3 LERPScaling = GLKVector3Lerp(lPose.s, rPose.s, blendFactor); GLKMatrix4 currentTransform = GLKMatrix4MakeWithQuaternion(SLERPRotation); currentTransform = GLKMatrix4TranslateWithVector3(currentTransform, LERPTranslation); currentTransform = GLKMatrix4ScaleWithVector3(currentTransform, LERPScaling); GLKMatrix4 inverseBindTransform = GLKMatrix4MakeWithQuaternion(aSkeleton.joints[i].inverseBindTransform.q); inverseBindTransform = GLKMatrix4TranslateWithVector3(inverseBindTransform, aSkeleton.joints[i].inverseBindTransform.t); inverseBindTransform = GLKMatrix4ScaleWithVector3(inverseBindTransform, aSkeleton.joints[i].inverseBindTransform.s); if (aSkeleton.joints[i].parentIndex == -1) { bindPosePalette[i] = inverseBindTransform; currentPosePalette[i] = currentTransform; } else { bindPosePalette[i] = GLKMatrix4Multiply(inverseBindTransform, bindPosePalette[aSkeleton.joints[i].parentIndex]); currentPosePalette[i] = GLKMatrix4Multiply(currentPosePalette[aSkeleton.joints[i].parentIndex], currentTransform); } aSkeleton.skinningPalette[i] = GLKMatrix4Multiply(currentPosePalette[i], bindPosePalette[i]); } Finally, this is my vertex shader: #version 100 uniform mat4 modelMatrix; uniform mat3 normalMatrix; uniform mat4 projectionMatrix; uniform mat4 skinningPalette[6]; uniform lowp float skinningEnabled; attribute vec4 position; attribute vec3 normal; attribute vec2 tCoordinates; attribute vec4 jointsWeights; attribute vec4 jointsIndices; varying highp vec2 tCoordinatesVarying; varying highp float lIntensity; void main() { tCoordinatesVarying = tCoordinates; vec4 skinnedVertexPosition = vec4(0.); for (int i = 0; i < 4; i++) { skinnedVertexPosition += jointsWeights[i] * skinningPalette[int(jointsIndices[i])] * position; } vec4 skinnedNormal = vec4(0.); for (int i = 0; i < 4; i++) { skinnedNormal += jointsWeights[i] * skinningPalette[int(jointsIndices[i])] * vec4(normal, 0.); } vec4 finalPosition = mix(position, skinnedVertexPosition, skinningEnabled); vec4 finalNormal = mix(vec4(normal, 0.), skinnedNormal, skinningEnabled); vec3 eyeNormal = normalize(normalMatrix * finalNormal.xyz); vec3 lightPosition = vec3(0., 0., 2.); lIntensity = max(0.0, dot(eyeNormal, normalize(lightPosition))); gl_Position = projectionMatrix * modelMatrix * finalPosition; } The result is that the animation displays wrong in terms of orientation. That is, instead of bobbing up and down it bobs in and out (along what I think is the Z axis according to my transform in the export clip). And the rotation angle is counterclockwise instead of clockwise. If I try with a more than one joint, then it's almost as if the second joint rotates in it's own different coordinate space and does not follow 100% its parent's transform. Which I assume it should from my animation subsystem which I assume in turn follows the theory I explained for the case of more than one joint. Any thoughts?

  Read the article

• SQL Authority News – Play by Play with Pinal Dave – A Birthday Gift

  - by Pinal Dave

  Today is my birthday. Personal Note When I was young, I was always looking forward to my birthday as on this day, I used to get gifts from everybody. Now when I am getting old on each of my birthday, I have almost same feeling but the direction is different. Now on each of my birthday, I feel like giving gifts to everybody. I have received lots of support, love and respect from everybody; and now I must return it back.Well, on this birthday, I have very unique gifts for everybody – my latest course on SQL Server. How I Tune Performance I often get questions where I am asked how do I work on a normal day. I am often asked that how do I work when I have performance tuning project is assigned to me. Lots of people have expressed their desire that they want me to explain and demonstrate my own method of solving performance problem when I am facing real world problem. It is a pretty difficult task as in the real world, nothing goes as planned and usually planned demonstrations have no place there. The real world, demands real solutions and in a timely fashion. If a consultant goes to industry and does not demonstrate his/her capabilities in very first few minutes, it does not matter how much fame he/she is, the door is shown to them eventually. It is true and in my early career, I have faced it quite commonly. I have learned the trick to be honest from the start and request absolutely transparent communication from the organization where I am to consult. Play by Play Play by Play is a very unique setup. It is not planned and it is a step by step course. It is like a reality show – a very real encounter to the problem and real problem solving approach. I had a great time doing this course. Geoffrey Grosenbach (VP of Pluralsight) sits down with me to see what a SQL Server Admin does in the real world. This Play-by-Play focuses on SQL Server performance tuning and I go over optimizing queries and fine-tuning the server. The table of content of this course is very simple. Introduction In the introduction I explained my basic strategies when I am approached by a customer for performance tuning. Basic Information Gathering In this module I explain how I do gather various information for performance tuning project. It is very crucial to demonstrate to customers for consultant his capability of solving problem. I attempt to resolve a small problem which gives a big positive impact on performance, consultant have to gather proper information from the start. I demonstrate in this module, how one can collect all the important performance tuning metrics. Removing Performance Bottleneck In this module, I build upon the previous module’s statistics collected. I analysis various performance tuning measures and immediately start implementing various tweaks on the performance, which will start improving the performance of my server. This is a very effective method and it gives immediate return of efforts. Index Optimization Indexes are considered as a silver bullet for performance tuning. However, it is not true always there are plenty of examples where indexes even performs worst after implemented. The key is to understand a few of the basic properties of the index and implement the right things at the right time. In this module, I describe in detail how to do index optimizations and what are right and wrong with Index. If you are a DBA or developer, and if your application is running slow – this is must attend module for you. I have some really interesting stories to tell as well. Optimize Query with Rewrite Every problem has more than one solution, in this module we will see another very famous, but hard to master skills for performance tuning – Query Rewrite. There are few do’s and don’ts for any query rewrites. I take a very simple example and demonstrate how query rewrite can improve the performance of the query at many folds. I also share some real world funny stories in this module. This course is hosted at Pluralsight. You will need a valid login for Pluralsight to watch  Play by Play: Pinal Dave course. You can also sign up for FREE Trial of Pluralsight to watch this course. As today is my birthday – I will give 10 people (randomly) who will express their desire to learn this course, a free code. Please leave your comment and I will send you free code to watch this course for free. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority News, T SQL, Video

  Read the article

• An issue with tessellation a model with DirectX11

  - by Paul Ske

  I took the hardware tessellation tutorial from Rastertek and implemended texturing instead of color. This is great, so I wanted to implemended the same techique to a model inside my game editor and I noticed it doesn't draw anything. I compared the detailed tessellation from DirectX SDK sample. Inside the shader file - if I replace the HullInputType with PixelInputType it draws. So, I think because when I compiled the shaders inside the program it compiles VertexShader, PixelShader, HullShader then DomainShader. Isn't it suppose to be VertexShader, HullSHader, DomainShader then PixelShader or does it really not matter? I am just curious why wouldn't the model even be drawn when HullInputType but renders fine with PixelInputType. Shader Code: [code] cbuffer ConstantBuffer { float4x4 WVP; float4x4 World; // the rotation matrix float3 lightvec; // the light's vector float4 lightcol; // the light's color float4 ambientcol; // the ambient light's color bool isSelected; } cbuffer cameraBuffer { float3 cameraDirection; float padding; } cbuffer TessellationBuffer { float tessellationAmount; float3 padding2; } struct ConstantOutputType { float edges[3] : SV_TessFactor; float inside : SV_InsideTessFactor; }; Texture2D Texture; Texture2D NormalTexture; SamplerState ss { MinLOD = 5.0f; MipLODBias = 0.0f; }; struct HullOutputType { float3 position : POSITION; float2 texcoord : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; }; struct HullInputType { float4 position : POSITION; float2 texcoord : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; }; struct VertexInputType { float4 position : POSITION; float2 texcoord : TEXCOORD; float3 normal : NORMAL; float3 tangent : TANGENT; uint uVertexID : SV_VERTEXID; }; struct PixelInputType { float4 position : SV_POSITION; float2 texcoord : TEXCOORD0; // texture coordinates float3 normal : NORMAL; float3 tangent : TANGENT; float4 color : COLOR; float3 viewDirection : TEXCOORD1; float4 depthBuffer : TEXTURE0; }; HullInputType VShader(VertexInputType input) { HullInputType output; output.position.w = 1.0f; output.position = mul(input.position,WVP); output.texcoord = input.texcoord; output.normal = input.normal; output.tangent = input.tangent; //output.normal = mul(normal,World); //output.tangent = mul(tangent,World); //output.color = output.color; //output.texcoord = texcoord; // set the texture coordinates, unmodified return output; } ConstantOutputType TexturePatchConstantFunction(InputPatch inputPatch,uint patchID : SV_PrimitiveID) { ConstantOutputType output; output.edges[0] = tessellationAmount; output.edges[1] = tessellationAmount; output.edges[2] = tessellationAmount; output.inside = tessellationAmount; return output; } [domain("tri")] [partitioning("integer")] [outputtopology("triangle_cw")] [outputcontrolpoints(3)] [patchconstantfunc("TexturePatchConstantFunction")] HullOutputType HShader(InputPatch patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID) { HullOutputType output; // Set the position for this control point as the output position. output.position = patch[pointId].position; // Set the input color as the output color. output.texcoord = patch[pointId].texcoord; output.normal = patch[pointId].normal; output.tangent = patch[pointId].tangent; return output; } [domain("tri")] PixelInputType DShader(ConstantOutputType input, float3 uvwCoord : SV_DomainLocation, const OutputPatch patch) { float3 vertexPosition; float2 uvPosition; float4 worldposition; PixelInputType output; // Interpolate world space position with barycentric coordinates float3 vWorldPos = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; // Determine the position of the new vertex. vertexPosition = vWorldPos; // Calculate the position of the new vertex against the world, view, and projection matrices. output.position = mul(float4(vertexPosition, 1.0f),WVP); // Send the input color into the pixel shader. output.texcoord = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.normal = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.tangent = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; //output.depthBuffer = output.position; //output.depthBuffer.w = 1.0f; //worldposition = mul(output.position,WVP); //output.viewDirection = cameraDirection.xyz - worldposition.xyz; //output.viewDirection = normalize(output.viewDirection); return output; } [/code] Somethings are commented out but will be in place when fixed. I'm probably not connecting something correctly.

  Read the article

• BIP and Mapviewer Mash Up I

  - by Tim Dexter

  I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

  Read the article

• 2D OBB collision detection, resolving collisions?

  - by Milo

  I currently use OBBs and I have a vehicle that is a rigid body and some buildings. Here is my update() private void update() { camera.setPosition((vehicle.getPosition().x * camera.getScale()) - ((getWidth() ) / 2.0f), (vehicle.getPosition().y * camera.getScale()) - ((getHeight() ) / 2.0f)); //camera.move(input.getAnalogStick().getStickValueX() * 15.0f, input.getAnalogStick().getStickValueY() * 15.0f); if(input.isPressed(ControlButton.BUTTON_GAS)) { vehicle.setThrottle(1.0f, false); } if(input.isPressed(ControlButton.BUTTON_BRAKE)) { vehicle.setBrakes(1.0f); } vehicle.setSteering(input.getAnalogStick().getStickValueX()); vehicle.update(16.6666f / 1000.0f); ArrayList<Building> buildings = city.getBuildings(); for(Building b : buildings) { if(vehicle.getRect().overlaps(b.getRect())) { vehicle.update(-17.0f / 1000.0f); break; } } } The collision detection works well. What doesn't is how they are dealt with. My goal is simple. If the vehicle hits a building, it should stop, and never go into the building. When I apply negative torque to reverse the car should not feel buggy and move away from the building. I don't want this to look buggy. This is my rigid body class: class RigidBody extends Entity { //linear private Vector2D velocity = new Vector2D(); private Vector2D forces = new Vector2D(); private float mass; //angular private float angularVelocity; private float torque; private float inertia; //graphical private Vector2D halfSize = new Vector2D(); private Bitmap image; public RigidBody() { //set these defaults so we don't get divide by zeros mass = 1.0f; inertia = 1.0f; } //intialize out parameters public void initialize(Vector2D halfSize, float mass, Bitmap bitmap) { //store physical parameters this.halfSize = halfSize; this.mass = mass; image = bitmap; inertia = (1.0f / 20.0f) * (halfSize.x * halfSize.x) * (halfSize.y * halfSize.y) * mass; RectF rect = new RectF(); float scalar = 10.0f; rect.left = (int)-halfSize.x * scalar; rect.top = (int)-halfSize.y * scalar; rect.right = rect.left + (int)(halfSize.x * 2.0f * scalar); rect.bottom = rect.top + (int)(halfSize.y * 2.0f * scalar); setRect(rect); } public void setLocation(Vector2D position, float angle) { getRect().set(position, getWidth(), getHeight(), angle); } public Vector2D getPosition() { return getRect().getCenter(); } @Override public void update(float timeStep) { //integrate physics //linear Vector2D acceleration = Vector2D.scalarDivide(forces, mass); velocity = Vector2D.add(velocity, Vector2D.scalarMultiply(acceleration, timeStep)); Vector2D c = getRect().getCenter(); c = Vector2D.add(getRect().getCenter(), Vector2D.scalarMultiply(velocity , timeStep)); setCenter(c.x, c.y); forces = new Vector2D(0,0); //clear forces //angular float angAcc = torque / inertia; angularVelocity += angAcc * timeStep; setAngle(getAngle() + angularVelocity * timeStep); torque = 0; //clear torque } //take a relative Vector2D and make it a world Vector2D public Vector2D relativeToWorld(Vector2D relative) { Matrix mat = new Matrix(); float[] Vector2Ds = new float[2]; Vector2Ds[0] = relative.x; Vector2Ds[1] = relative.y; mat.postRotate(JMath.radToDeg(getAngle())); mat.mapVectors(Vector2Ds); return new Vector2D(Vector2Ds[0], Vector2Ds[1]); } //take a world Vector2D and make it a relative Vector2D public Vector2D worldToRelative(Vector2D world) { Matrix mat = new Matrix(); float[] Vectors = new float[2]; Vectors[0] = world.x; Vectors[1] = world.y; mat.postRotate(JMath.radToDeg(-getAngle())); mat.mapVectors(Vectors); return new Vector2D(Vectors[0], Vectors[1]); } //velocity of a point on body public Vector2D pointVelocity(Vector2D worldOffset) { Vector2D tangent = new Vector2D(-worldOffset.y, worldOffset.x); return Vector2D.add( Vector2D.scalarMultiply(tangent, angularVelocity) , velocity); } public void applyForce(Vector2D worldForce, Vector2D worldOffset) { //add linear force forces = Vector2D.add(forces ,worldForce); //add associated torque torque += Vector2D.cross(worldOffset, worldForce); } @Override public void draw( GraphicsContext c) { c.drawRotatedScaledBitmap(image, getPosition().x, getPosition().y, getWidth(), getHeight(), getAngle()); } } Essentially, when any rigid body hits a building it should exhibit the same behavior. How is collision solving usually done? Thanks

  Read the article

• Opposite Force to Apply to a Collided Rigid Body?

  - by Milo

  I'm working on the physics for my GTA2-like game so I can learn more about game physics. The collision detection and resolution are working great. I'm now just unsure how to compute the force to apply to a body after it collides with a wall. My rigid body looks like this: /our simulation object class RigidBody extends Entity { //linear private Vector2D velocity = new Vector2D(); private Vector2D forces = new Vector2D(); private float mass; private Vector2D v = new Vector2D(); //angular private float angularVelocity; private float torque; private float inertia; //graphical private Vector2D halfSize = new Vector2D(); private Bitmap image; private Matrix mat = new Matrix(); private float[] Vector2Ds = new float[2]; private Vector2D tangent = new Vector2D(); private static Vector2D worldRelVec = new Vector2D(); private static Vector2D relWorldVec = new Vector2D(); private static Vector2D pointVelVec = new Vector2D(); private static Vector2D acceleration = new Vector2D(); public RigidBody() { //set these defaults so we don't get divide by zeros mass = 1.0f; inertia = 1.0f; setLayer(LAYER_OBJECTS); } protected void rectChanged() { if(getWorld() != null) { getWorld().updateDynamic(this); } } //intialize out parameters public void initialize(Vector2D halfSize, float mass, Bitmap bitmap) { //store physical parameters this.halfSize = halfSize; this.mass = mass; image = bitmap; inertia = (1.0f / 20.0f) * (halfSize.x * halfSize.x) * (halfSize.y * halfSize.y) * mass; RectF rect = new RectF(); float scalar = 10.0f; rect.left = (int)-halfSize.x * scalar; rect.top = (int)-halfSize.y * scalar; rect.right = rect.left + (int)(halfSize.x * 2.0f * scalar); rect.bottom = rect.top + (int)(halfSize.y * 2.0f * scalar); setRect(rect); } public void setLocation(Vector2D position, float angle) { getRect().set(position.x,position.y, getWidth(), getHeight(), angle); rectChanged(); } public Vector2D getPosition() { return getRect().getCenter(); } @Override public void update(float timeStep) { doUpdate(timeStep); } public void doUpdate(float timeStep) { //integrate physics //linear acceleration.x = forces.x / mass; acceleration.y = forces.y / mass; velocity.x += (acceleration.x * timeStep); velocity.y += (acceleration.y * timeStep); //velocity = Vector2D.add(velocity, Vector2D.scalarMultiply(acceleration, timeStep)); Vector2D c = getRect().getCenter(); v.x = getRect().getCenter().getX() + (velocity.x * timeStep); v.y = getRect().getCenter().getY() + (velocity.y * timeStep); setCenter(v.x, v.y); forces.x = 0; //clear forces forces.y = 0; //angular float angAcc = torque / inertia; angularVelocity += angAcc * timeStep; setAngle(getAngle() + angularVelocity * timeStep); torque = 0; //clear torque } //take a relative Vector2D and make it a world Vector2D public Vector2D relativeToWorld(Vector2D relative) { mat.reset(); Vector2Ds[0] = relative.x; Vector2Ds[1] = relative.y; mat.postRotate(JMath.radToDeg(getAngle())); mat.mapVectors(Vector2Ds); relWorldVec.x = Vector2Ds[0]; relWorldVec.y = Vector2Ds[1]; return relWorldVec; } //take a world Vector2D and make it a relative Vector2D public Vector2D worldToRelative(Vector2D world) { mat.reset(); Vector2Ds[0] = world.x; Vector2Ds[1] = world.y; mat.postRotate(JMath.radToDeg(-getAngle())); mat.mapVectors(Vector2Ds); worldRelVec.x = Vector2Ds[0]; worldRelVec.y = Vector2Ds[1]; return worldRelVec; } //velocity of a point on body public Vector2D pointVelocity(Vector2D worldOffset) { tangent.x = -worldOffset.y; tangent.y = worldOffset.x; pointVelVec.x = (tangent.x * angularVelocity) + velocity.x; pointVelVec.y = (tangent.y * angularVelocity) + velocity.y; return pointVelVec; } public void applyForce(Vector2D worldForce, Vector2D worldOffset) { //add linear force forces.x += worldForce.x; forces.y += worldForce.y; //add associated torque torque += Vector2D.cross(worldOffset, worldForce); } @Override public void draw( GraphicsContext c) { c.drawRotatedScaledBitmap(image, getPosition().x, getPosition().y, getWidth(), getHeight(), getAngle()); } public Vector2D getVelocity() { return velocity; } public void setVelocity(Vector2D velocity) { this.velocity = velocity; } } The way it is given force is by the applyForce method, this method considers angular torque. I'm just not sure how to come up with the vectors in the case where: RigidBody hits static entity RigidBody hits other RigidBody that may or may not be in motion. Would anyone know a way (without too complex math) that I could figure out the opposite force I need to apply to the car? I know the normal it is colliding with and how deep it collided. My main goal is so that say I hit a building from the side, well the car should not just stay there, it should slowly rotate out of it if I'm more than 45 degrees. Right now when I hit a wall I only change the velocity directly which does not consider angular force. Thanks!

  Read the article

• Stepping outside Visual Studio IDE [Part 1 of 2] with Eclipse

  - by mbcrump

  “If you're walking down the right path and you're willing to keep walking, eventually you'll make progress." – Barack Obama In my quest to become a better programmer, I’ve decided to start the process of learning Java. I will be primary using the Eclipse Language IDE. I will not bore you with the history just what is needed for a .NET developer to get up and running. I will provide links, screenshots and a few brief code tutorials. Links to documentation. The Official Eclipse FAQ’s Links to binaries. Eclipse IDE for Java EE Developers the Galileo Package (based on Eclipse 3.5 SR2)  Sun Developer Network – Java Eclipse officially recommends Java version 5 (also known as 1.5), although many Eclipse users use the newer version 6 (1.6). That's it, nothing more is required except to compile and run java. Installation Unzip the Eclipse IDE for Java EE Developers and double click the file named Eclipse.exe. You will probably want to create a link for it on your desktop. Once, it’s installed and launched you will have to select a workspace. Just accept the defaults and you will see the following: Lets go ahead and write a simple program. To write a "Hello World" program follow these steps: Start Eclipse. Create a new Java Project: File->New->Project. Select "Java" in the category list. Select "Java Project" in the project list. Click "Next". Enter a project name into the Project name field, for example, "HW Project". Click "Finish" Allow it to open the Java perspective Create a new Java class: Click the "Create a Java Class" button in the toolbar. (This is the icon below "Run" and "Window" with a tooltip that says "New Java Class.") Enter "HW" into the Name field. Click the checkbox indicating that you would like Eclipse to create a "public static void main(String[] args)" method. Click "Finish". A Java editor for HW.java will open. In the main method enter the following line.      System.out.println("This is my first java program and btw Hello World"); Save using ctrl-s. This automatically compiles HW.java. Click the "Run" button in the toolbar (looks like a VCR play button). You will be prompted to create a Launch configuration. Select "Java Application" and click "New". Click "Run" to run the Hello World program. The console will open and display "This is my first java program and btw Hello World". You now have your first java program, lets go ahead and make an applet. Since you already have the HW.java open, click inside the window and remove all code. Now copy/paste the following code snippet. Java Code Snippet for an applet. 1: import java.applet.Applet; 2: import java.awt.Graphics; 3: import java.awt.Color; 4:  5: @SuppressWarnings("serial") 6: public class HelloWorld extends Applet{ 7:  8: String text = "I'm a simple applet"; 9:  10: public void init() { 11: text = "I'm a simple applet"; 12: setBackground(Color.GREEN); 13: } 14:  15: public void start() { 16: System.out.println("starting..."); 17: } 18:  19: public void stop() { 20: System.out.println("stopping..."); 21: } 22:  23: public void destroy() { 24: System.out.println("preparing to unload..."); 25: } 26:  27: public void paint(Graphics g){ 28: System.out.println("Paint"); 29: g.setColor(Color.blue); 30: g.drawRect(0, 0, 31: getSize().width -1, 32: getSize().height -1); 33: g.setColor(Color.black); 34: g.drawString(text, 15, 25); 35: } 36: } The Eclipse IDE should look like Click "Run" to run the Hello World applet. Now, lets test our new java applet. So, navigate over to your workspace for example: “C:\Users\mbcrump\workspace\HW Project\bin” and you should see 2 files. HW.class java.policy.applet Create a HTML page with the following code: 1: <HTML> 2: <BODY> 3: <APPLET CODE=HW.class WIDTH=200 HEIGHT=100> 4: </APPLET> 5: </BODY> 6: </HTML> Open, the HTML page in Firefox or IE and you will see your applet running.  I hope this brief look at the Eclipse IDE helps someone get acquainted with Java Development. Even if your full time gig is with .NET, it will not hurt to have another language in your tool belt. As always, I welcome any suggestions or comments.

  Read the article

• Nashorn ?? JDBC ? Oracle DB ?????·?? 3

  - by Homma

  ???? Nashorn ?? JavaScript ??????? JDBC ? Oracle DB ???????????????????? Oracle DB ????? SQL ??????????????? ???????????????????????????????? ????????? URL ? https://blogs.oracle.com/nashorn_ja/entry/nashorn_jdbc_3 ??? JDBC ??????????????? JDBC ????????????????? Nashorn ????? JavaScript ????????????? ???????? JDBC OCI ???????????????????????????????? ????? ?? Java ??????????????? Nashorn ? JavaScript ???????????????? // Invoke jjs with -scripting option. /* * This sample can be used to check the JDBC installation. * Just run it and provide the connect information. It will select * "Hello World" from the database. */ var OracleDataSource = Java.type("oracle.jdbc.pool.OracleDataSource"); function main() { // Prompt the user for connect information print("Please enter information to test connection to the database"); var user, password, database; user = readLine("user: "); slash_index = user.indexOf('/'); if (slash_index != -1) { password = user.substring(slash_index + 1) user = user.substring(0, slash_index); } else password = readLine("password: "); database = readLine("database(a TNSNAME entry): "); java.lang.System.out.print("Connecting to the database..."); java.lang.System.out.flush(); print("Connecting..."); // Open an OracleDataSource and get a connection var ods = new OracleDataSource(); ods.setURL("jdbc:oracle:oci:@" + database); ods.setUser(user); ods.setPassword(password); var conn = ods.getConnection(); print("connected."); // Create a statement var stmt = conn.createStatement(); // Do the SQL "Hello World" thing var rset = stmt.executeQuery("select 'Hello World' from dual"); while (rset.next()) print(rset.getString(1)); // close the result set, the statement and the connection rset.close(); stmt.close(); conn.close(); print("Your JDBC installation is correct."); } main(); oracle.jdbc.pool.OracleDataSource ? Java.type() ?????Nashorn ??????????????????????????? Java ? System.out.println() ? System.out.flush() ? java.lang. ???????????????? Java ?????????? readEntry() ????? Nashorn ? readLine() ???????????? Java ????????????????????????JavaScript ?????????????????? ?? Java ??????????????????????????? Java ???????????????? JavaScript ?????????????????? ???????? JDBC OCI ???????????????? LD_LIBRARY_PATH ????????????????? ???Nashorn ? readLine() ??????????jjs ????? -scripting ????????????????? $ export LD_LIBRARY_PATH=${ORACLE_HOME}/lib $ jjs -scripting -cp ${ORACLE_HOME}/jdbc/lib/ojdbc6.jar JdbcCheckup.js Please enter information to test connection to the database user: test password: test database(a TNSNAME entry): orcl Connecting to the database...Connecting... connected. Hello World Your JDBC installation is correct. JDBC OCI ????????????????? "select 'Hello World' from dual" ??? SQL ?????????????? ?????????????????database ???? :: ??????????? ??? ??? Oracle DB ????? SQL ???????????????? Java ? JDBC ??????????????????????????? Nashorn ??????????????????????????????????

  Read the article

• WPF Dialog Box Property Value Editor access source control

  - by Cicik

  Hello, I have User control in WPF with dependency property DEP1 on which i set value by DialogPropertyValueEditor(code below): Public Class OPCItemDialogPropertyValueEditor Inherits DialogPropertyValueEditor Private res As New EditorResources() Public Sub New() Me.InlineEditorTemplate = TryCast(res("OPCItemInlineEditorTemplate"), DataTemplate) End Sub Public Overrides Sub ShowDialog(ByVal propertyValue As PropertyValue, ByVal commandSource As IInputElement) Dim window As New MyWindowToSetProperty(SomeParameter, "STRING Value Of ANother Property In control") If window.ShowDialog() Then propertyValue.Value = window.ChoosedOPCItem End If End Sub End Class I need to set value of property of my control as parameter("STRING Value Of ANother Property In control") for window from i set value to property DEP1 Thanks

  Read the article

• WPF Dialog Box Property Value Editor access source(parent) control

  - by Cicik

  Hello, I have User control in WPF with dependency property DEP1 on which i set value by DialogPropertyValueEditor(code below): Public Class OPCItemDialogPropertyValueEditor Inherits DialogPropertyValueEditor Private res As New EditorResources() Public Sub New() Me.InlineEditorTemplate = TryCast(res("OPCItemInlineEditorTemplate"), DataTemplate) End Sub Public Overrides Sub ShowDialog(ByVal propertyValue As PropertyValue, ByVal commandSource As IInputElement) Dim window As New MyWindowToSetProperty(SomeParameter, "STRING Value Of ANother Property In control") If window.ShowDialog() Then propertyValue.Value = window.ChoosedOPCItem End If End Sub End Class I need to set value of property of my control as parameter("STRING Value Of ANother Property In control") for window from i set value to property DEP1 Thanks

  Read the article

• Rails 3 and RJS

  - by Denis

  Hi, I use the rails 3.0.0.beta Is there any new syntax to write RJS, here is an example def remote_create @photo = Photo.new(params[:photo]) respond_to do |format| if @photo.save # add @photo's thumbnail to last import tag format.js { render :update do |page| page.insert_html :bottom, 'polaroids' , :partial => 'polaroid', :locals => {:photo => @photo} end } else #... end end end

  Read the article

• How to extent activrerecord,just make id to id.to_i

  - by qichunren

  module ActiveRecord module Mixin alias old_id id def id old_id.to_i end def hello "hellooooooooooooo" end end end ActiveRecord::Base.send :include, ActiveRecord::Mixin I make is because: id column in oracle is number type,not number(10), @user.id return 123.0,not 123,so I would like to do it by extend ar. But my way above does not work for me,it still show number with dot zero,123.0. How to make id auto invove id.to_i???

  Read the article

• Access Rails 3 Session from Rack?

  - by viatropos

  I was able to do the following in Rails 2.3.5 to access attributes that I set on the session from within my Rails app. Now in Rails 3, env["rack.session"] is nil. How do I do the same thing in Rails 3? class CallbackFilter def initialize(app) @app = app end def call(env) unless env["rack.session"][:oauth_callback_method].blank? env["REQUEST_METHOD"] = env["rack.session"].delete(:oauth_callback_method).to_s.upcase end @app.call(env) end end

  Read the article

• How do I create an accordion box using JavaScript?

  - by user105033

  What I want is this: Start: End: ---------------- ---------------- |asdf | | | ---------------- | stuff | | | | | ---------------- | asdf | ---------------- When you click asdf it should end up looking like the End box but the 'stuff' box should appear gradually so it looks like the asdf box is pulling down the stuff menu. When asdf is clicked again it should look like the stuff box is pulling up the asdf box and end at the Start position. Any tutorials on doing things like this?

  Read the article

• Binary Cosine Cofficient

  - by hairyyak

  I was given the following forumulae for calculating this sim=|QnD| / v|Q|v|D| I went ahed and implemented a class to compare strings consisting of a series of words #pragma once #include <vector> #include <string> #include <iostream> #include <vector> using namespace std; class StringSet { public: StringSet(void); StringSet( const string the_strings[], const int no_of_strings); ~StringSet(void); StringSet( const vector<string> the_strings); void add_string( const string the_string); bool remove_string( const string the_string); void clear_set(void); int no_of_strings(void) const; friend ostream& operator <<(ostream& outs, StringSet& the_strings); friend StringSet operator *(const StringSet& first, const StringSet& second); friend StringSet operator +(const StringSet& first, const StringSet& second); double binary_coefficient( const StringSet& the_second_set); private: vector<string> set; }; #include "StdAfx.h" #include "StringSet.h" #include <iterator> #include <algorithm> #include <stdexcept> #include <iostream> #include <cmath> StringSet::StringSet(void) { } StringSet::~StringSet(void) { } StringSet::StringSet( const vector<string> the_strings) { set = the_strings; } StringSet::StringSet( const string the_strings[], const int no_of_strings) { copy( the_strings, &the_strings[no_of_strings], back_inserter(set)); } void StringSet::add_string( const string the_string) { try { if( find( set.begin(), set.end(), the_string) == set.end()) { set.push_back(the_string); } else { //String is already in the set. throw domain_error("String is already in the set"); } } catch( domain_error e) { cout << e.what(); exit(1); } } bool StringSet::remove_string( const string the_string) { //Found the occurrence of the string. return it an iterator pointing to it. vector<string>::iterator iter; if( ( iter = find( set.begin(), set.end(), the_string) ) != set.end()) { set.erase(iter); return true; } return false; } void StringSet::clear_set(void) { set.clear(); } int StringSet::no_of_strings(void) const { return set.size(); } ostream& operator <<(ostream& outs, StringSet& the_strings) { vector<string>::const_iterator const_iter = the_strings.set.begin(); for( ; const_iter != the_strings.set.end(); const_iter++) { cout << *const_iter << " "; } cout << endl; return outs; } //This function returns the union of the two string sets. StringSet operator *(const StringSet& first, const StringSet& second) { vector<string> new_string_set; new_string_set = first.set; for( unsigned int i = 0; i < second.set.size(); i++) { vector<string>::const_iterator const_iter = find(new_string_set.begin(), new_string_set.end(), second.set[i]); //String is new - include it. if( const_iter == new_string_set.end() ) { new_string_set.push_back(second.set[i]); } } StringSet the_set(new_string_set); return the_set; } //This method returns the intersection of the two string sets. StringSet operator +(const StringSet& first, const StringSet& second) { //For each string in the first string look though the second and see if //there is a matching pair, in which case include the string in the set. vector<string> new_string_set; vector<string>::const_iterator const_iter = first.set.begin(); for ( ; const_iter != first.set.end(); ++const_iter) { //Then search through the entire second string to see if //there is a duplicate. vector<string>::const_iterator const_iter2 = second.set.begin(); for( ; const_iter2 != second.set.end(); const_iter2++) { if( *const_iter == *const_iter2 ) { new_string_set.push_back(*const_iter); } } } StringSet new_set(new_string_set); return new_set; } double StringSet::binary_coefficient( const StringSet& the_second_set) { double coefficient; StringSet intersection = the_second_set + set; coefficient = intersection.no_of_strings() / sqrt((double) no_of_strings()) * sqrt((double)the_second_set.no_of_strings()); return coefficient; } However when I try and calculate the coefficient using the following main function: // Exercise13.cpp : main project file. #include "stdafx.h" #include <boost/regex.hpp> #include "StringSet.h" using namespace System; using namespace System::Runtime::InteropServices; using namespace boost; //This function takes as input a string, which //is then broken down into a series of words //where the punctuaction is ignored. StringSet break_string( const string the_string) { regex re; cmatch matches; StringSet words; string search_pattern = "\\b(\\w)+\\b"; try { // Assign the regular expression for parsing. re = search_pattern; } catch( regex_error& e) { cout << search_pattern << " is not a valid regular expression: \"" << e.what() << "\"" << endl; exit(1); } sregex_token_iterator p(the_string.begin(), the_string.end(), re, 0); sregex_token_iterator end; for( ; p != end; ++p) { string new_string(p->first, p->second); String^ copy_han = gcnew String(new_string.c_str()); String^ copy_han2 = copy_han->ToLower(); char* str2 = (char*)(void*)Marshal::StringToHGlobalAnsi(copy_han2); string new_string2(str2); words.add_string(new_string2); } return words; } int main(array<System::String ^> ^args) { StringSet words = break_string("Here is a string, with some; words"); StringSet words2 = break_string("There is another string,"); cout << words.binary_coefficient(words2); return 0; } I get an index which is 1.5116 rather than a value from 0 to 1. Does anybody have a clue why this is the case? Any help would be appreciated.

  Read the article

• Excel 2003 - VBA for looping through every cell in a row to provide attributes/formatting

  - by Justin

  say I want to make the first row of the excel ss something like this: .Rows("1:1").Select With Selection.Borders(xlEdgeLeft) .LineStyle = xlContinuous .Weight = xlMedium .ColorIndex = xlAutomatic End With With Selection.Borders(xlEdgeTop) .LineStyle = xlContinuous .Weight = xlMedium .ColorIndex = xlAutomatic End With With Selection.Borders(xlEdgeBottom) .LineStyle = xlContinuous .Weight = xlMedium .ColorIndex = xlAutomatic End With With Selection.Borders(xlEdgeRight) .LineStyle = xlContinuous .Weight = xlMedium .ColorIndex = xlAutomatic End With only I want each individual cells to have the outline, not the entire selection. how can i say for each cell in row 1, do the above idea Thanks!

  Read the article

• Creating thousands of records in Rails

  - by willCosgrove

  Let me set the stage: My application deals with gift cards. When we create cards they have to have a unique string that the user can use to redeem it with. So when someone orders our gift cards, like a retailer, we need to make a lot of new card objects and store them in the DB. With that in mind, I'm trying to see how quickly I can have my application generate 100,000 Cards. Database expert, I am not, so I need someone to explain this little phenomena: When I create 1000 Cards, it takes 5 seconds. When I create 100,000 cards it should take 500 seconds right? Now I know what you're wanting to see, the card creation method I'm using, because the first assumption would be that it's getting slower because it's checking the uniqueness of a bunch of cards, more as it goes along. But I can show you my rake task desc "Creates cards for a retailer" task :order_cards, [:number_of_cards, :value, :retailer_name] => :environment do |t, args| t = Time.now puts "Searching for retailer" @retailer = Retailer.find_by_name(args[:retailer_name]) puts "Retailer found" puts "Generating codes" value = args[:value].to_i number_of_cards = args[:number_of_cards].to_i codes = [] top_off_codes(codes, number_of_cards) while codes != codes.uniq codes.uniq! top_off_codes(codes, number_of_cards) end stored_codes = Card.all.collect do |c| c.code end while codes != (codes - stored_codes) codes -= stored_codes top_off_codes(codes, number_of_cards) end puts "Codes are unique and generated" puts "Creating bundle" @bundle = @retailer.bundles.create!(:value => value) puts "Bundle created" puts "Creating cards" @bundle.transaction do codes.each do |code| @bundle.cards.create!(:code => code) end end puts "Cards generated in #{Time.now - t}s" end def top_off_codes(codes, intended_number) (intended_number - codes.size).times do codes << ReadableRandom.get(CODE_LENGTH) end end I'm using a gem called readable_random for the unique code. So if you read through all of that code, you'll see that it does all of it's uniqueness testing before it ever starts creating cards. It also writes status updates to the screen while it's running, and it always sits for a while at creating. Meanwhile it flies through the uniqueness tests. So my question to the stackoverflow community is: Why is my database slowing down as I add more cards? Why is this not a linear function in regards to time per card? I'm sure the answer is simple and I'm just a moron who knows nothing about data storage. And if anyone has any suggestions, how would you optimize this method, and how fast do you think you could get it to create 100,000 cards? (When I plotted out my times on a graph and did a quick curve fit to get my line formula, I calculated how long it would take to create 100,000 cards with my current code and it says 5.5 hours. That maybe completely wrong, I'm not sure. But if it stays on the line I curve fitted, it would be right around there.)

  Read the article

• Could you help me write a proper query in rails for accessing the following information?

  - by aditi-syal

  @workname = [] @recos = [] @bas = [] if current_user.recommendations.size != 0 current_user.recommendations.each do |r| if r.work_type == 'J' @job = Job.find_by_id(r.work_id) @workname.push "#{@job.title} at #{@job.company.name}" else @qualification = Qualification.find_by_id(r.work_id) @workname.push "Student at #{@qualification.school_name}" end @recommender = User.find_by_id(r.recommender_id) if r.recommender_work_type == 'J' @job = Job.find_by_id(r.recommender_work_id) @recos.push "#{@recommender.first_name} #{@recommender.last_name}" @bas.push "#{r.basis.gsub("You","#{@job.title} at #{@job.company.name}")}" else @qualification = Qualification.find_by_id(r.recommender_work_id) @recos.push "#{@recommender.first_name} #{@recommender.last_name} as " @bas.push "#{r.basis.gsub("You","Student at #{@qualification.school_name}")}" end end end

  Read the article

• ASP Web Service Not Working

  - by BlitzPackage

  Good people, Hello. Our webservice is not working. We should be receiving information via an HTTP POST. However, nothing is working. Below are the code files. Let me know what you think. Thanks in advance for any help or information you can provide. (By the way, some information (e.g. class names, connection strings, etc...) has been removed or changed in order to hide any sensitive information. Imports System.Web.Mail Imports System.Data Imports System.Data.SqlClient Imports System.IO Partial Class hbcertification Inherits System.Web.UI.Page Public strBody As String = "" Public sqlInsertStr As String = "" Public errStr As String = "" Public txn_id, first_name, last_name, address_street, address_city, address_state, address_zip, address_country, address_phone, payer_email, Price, key, invoice, payment_date, mc_fee, buyer_ip As String Dim myConn As New SqlConnection(ConfigurationSettings.AppSettings("ConnectionInfo")) '******************************************************************************************* Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load strBody += "Test email sent.Customer name: " & Request("first_name") & " " & Request("last_name") strBody += "Reg Key: " & Request("key") & "Transaction ID: " & Request("txn_id") & "Tran Type: " & Request("txn_type") updateFile(Server.MapPath("log.txt"), strBody) txn_id = Request("txn_id") first_name = Request("first_name") last_name = Request("last_name") address_street = Request("address_street") address_city = Request("address_city") address_state = Request("address_state") address_zip = Request("address_zip") address_country = Request("address_country") address_phone = Request("address_phone") payer_email = Request("payer_email") Price = Request("Price") key = Request("key") invoice = Request("invoice") payment_date = Request("payment_date") mc_fee = Request("mc_fee") buyer_ip = Request("buyer_ip") If Request("first_name") "" And Request("last_name") "" Then SendMail("[email protected]", "[email protected]", strBody, "Software Order Notification", "[email protected]") Else Response.Write("Email not sent. Name missing.") End If Dim sItem As String Response.Write("") If Request.Form("dosubmit") = "1" Then Response.Write("FORM VALS:") For Each sItem In Request.Form Response.Write("" & sItem & " - [" & Request.Form(sItem) & "]") Next sqlInsertStr += "insert into aspnet_MorrisCustomerInfo (TransactionID,FirstName,LastName,AddressStreet,AddressCity,AddressState,AddressZip,AddressCountry,AddressPhone,PayerEmail,Price,AuthenticationCode,InvoiceID,PurchaseDate,PaypalFee,PurchaseIPAddress) values ('" & SQLSafe(txn_id) & "','" & SQLSafe(first_name) & "','" & SQLSafe(last_name) & "','" & SQLSafe(address_street) & "','" & SQLSafe(address_city) & "','" & SQLSafe(address_state) & "','" & SQLSafe(address_zip) & "','" & SQLSafe(address_country) & "','" & SQLSafe(address_phone) & "','" & SQLSafe(payer_email) & "','" & SQLSafe(Price) & "','" & SQLSafe(key) & "','" & SQLSafe(invoice) & "','" & SQLSafe(payment_date) & "','" & SQLSafe(mc_fee) & "','" & SQLSafe(buyer_ip) & "')" runMyQuery(sqlInsertStr, False) End If Response.Write("sqlInsertStr is: " & sqlInsertStr) Response.Write("") End Sub '******************************************************************************************* Sub SendMail(ByVal strEmailAddress, ByVal strEmailAddress_cc, ByVal Email_Body, ByVal Email_Subject, ByVal Email_From) If Request.ServerVariables("server_name") "localhost" Then Try Dim resumeEmail As New MailMessage resumeEmail.To = strEmailAddress resumeEmail.Cc = strEmailAddress_cc resumeEmail.From = Email_From resumeEmail.Subject = Email_Subject resumeEmail.Priority = MailPriority.High 'resumeEmail.BodyFormat = MailFormat.Html resumeEmail.BodyFormat = MailFormat.Html resumeEmail.Body = Email_Body 'System.Web.Mail.SmtpMail.SmtpServer = "morris.com" System.Web.Mail.SmtpMail.SmtpServer = "relay-hosting.secureserver.net" System.Web.Mail.SmtpMail.Send(resumeEmail) Response.Write("Email sent.") Catch exc As Exception Response.Write("MAIL ERROR OCCURRED" & exc.ToString() & "From: " & Email_From) End Try Else Response.Write("TEST RESPONSE" & strBody & "") End If End Sub End Function End Class Process Data Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in \Windows\Microsoft.Net\Framework\v2.x\Config -- section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. -- section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. --

  Read the article

• How to create a \newenvironment in latex for a scaled table

  - by markus

  Hi, I try to define a table as a new environment. \newenvironment{scaledtable}[1]{% \begin{table}[h] \caption{xxx} \label{tab:xxx} \begin{center} \begin{tabular}{rcrrrrrrrrrrrrcc} }{ \hline \end{tabular} \end{center} \end{table}} The problem I have is that I can't use scalebox{}. If I put the closing bracket into the end definition of the environment, latex can't assign the brackets anymore. I also can not use PStricks because of pdflatex. /Markus

  Read the article

• [How to] Checkbox :: Select one at a time

  - by neo-nant

  This is the code section from inno setup.My intention is to make two Checkbox where at a time one is being selected. But this code return error when first checkbox is clicked. [code] procedure CheckBoxOnClick(Sender: TObject); var Box2,CheckBox: TNewCheckBox; begin if CheckBox.Checked then ///error:"Could not call proc" [sud it be global if then how to or what to change?] BEGIN CheckBox.State := cbUnchecked; Box2.State := cbChecked; END else BEGIN CheckBox.State := cbChecked; Box2.State := cbUnchecked; END; end; procedure Box2OnClick(Sender: TObject); var Box2,CheckBox: TNewCheckBox; begin if Box2.Checked then ///error:same BEGIN CheckBox.State := cbChecked; Box2.State := cbUnchecked; END else BEGIN CheckBox.State := cbUnchecked; Box2.State := cbChecked; END; end; procedure CreateTheWizardPages; var Page: TWizardPage; Box2,CheckBox: TNewCheckBox; begin { TButton and others } Page := CreateCustomPage(wpWelcome, '', ''); CheckBox := TNewCheckBox.Create(Page); CheckBox.Top :=ScaleY(8)+ScaleX(50); CheckBox.Width := Page.SurfaceWidth; CheckBox.Height := ScaleY(17); CheckBox.Caption := 'Do this'; CheckBox.Checked := True; CheckBox.OnClick := @CheckBoxOnClick; CheckBox.Parent := Page.Surface; Box2 := TNewCheckBox.Create(Page); Box2.Top :=ScaleY(8)+ScaleX(70); Box2.Width := Page.SurfaceWidth; Box2.Height := ScaleY(17); Box2.Caption := 'No,Thanks.'; Box2.Checked := False; Box2.OnClick := @Box2OnClick; Box2.Parent := Page.Surface; end; procedure InitializeWizard(); //var begin { Custom wizard pages } CreateTheWizardPages; end; Please tell me where to change..

  Read the article

• Matlab N-Queen Problem

  - by Kay

  main.m counter = 1; n = 8; board = zeros(1,n); back(0, board); disp(counter); sol.m function value = sol(board) for ( i = 1:(length(board))) for ( j = (i+1): (length(board)-1)) if (board(i) == board(j)) value = 0; return; end if ((board(i) - board(j)) == (i-j)) value = 0; return; end if ((board(i) - board(j)) == (j-i)) value = 0; return; end end end value = 1; return; back.m function back(depth, board) disp(board); if ( (depth == length(board)) && (sol2(board) == 1)) counter = counter + 1; end if ( depth < length(board)) for ( i = 0:length(board)) board(1,depth+1) = i; depth = depth + 1; solv2(depth, board); end end I'm attempting to find the maximum number of ways n-queen can be placed on an n-by-n board such that those queens aren't attacking eachother. I cannot figure out the problem with the above matlab code, i doubt it's a problem with my logic since i've tested out this logic in java and it seems to work perfectly well there. The code compiles but the issue is that the results it produces are erroneous. Java Code which works: public static int counter=0; public static boolean isSolution(final int[] board){ for (int i = 0; i < board.length; i++) { for (int j = i + 1; j < board.length; j++) { if (board[i] == board[j]) return false; if (board[i]-board[j] == i-j) return false; if (board[i]-board[j] == j-i) return false; } } return true; } public static void solve(int depth, int[] board){ if (depth == board.length && isSolution(board)) { counter++; } if (depth < board.length) { // try all positions of the next row for (int i = 0; i < board.length; i++) { board[depth] = i; solve(depth + 1, board); } } } public static void main(String[] args){ int n = 8; solve(0, new int[n]); System.out.println(counter); }

  Read the article

• Shoulda: How would I use an instance variable outside of a setup or should block?

  - by TheDeeno

  I'm trying to do something like the following: @special_attributes = Model.new.methods.select # a special subset @special_attributes.each do |attribute| context "A model with #{attribute}" setup do @model = Model.new end should "have some special characteristic" assert @model.method(attribute).call end end end However, @special_attributes is out of scope when running the unit tests, leaving me with a nil object on line 2. I can't figure out where to define it to bring it in scope. Any thoughts?

  Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >