Search Results

Search found 61061 results on 2443 pages for 'help authoring'.

Page 253/2443 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

  • DPM Coordinator Service is not responding

    - by Anatoly Vilchinsky
    Hi dear Gurus! I'm in stuck point now, so please at least try to help me. I've installed DPM 2010 on cluster server (w2k8 r2), everything was fine. Than I've tried tot install Protection Agent on both server of my cluster, but I'm getting error Error 312: The agent operation failed because the DPM Agent Coordinator service is not responding. Error details: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it (0x80070422) Recommended action: Restart the DPM Agent Coordinator service on . And the thing is that I'm totally can't see DPM Agent Coordinator service not on the localhost, nor on the second server. All the suggestion, that I've found in the internet are suggesting to restart this service, but how can I perform this if the one is absent? I'll be glad for any help

    Read the article

  • SharePoint 365 / Office 365 helpdesk template

    - by PnP
    I want to use my current Sharepoint 365 for handling helpdesk tickets. I want a really basic helpdesk utility. I tried to install some applications templates and I couldn't. I found that Office 365 does not support application templates (am I right?) I tried to install the help desk template here and also the Help Desk here, but I didn't find a way. I've seen that there is a commercial app, but I'm interested in checking some other options (specially free options).

    Read the article

  • excel cannot open the file xxx.xlsx' because the file format is not valid error

    - by Yavuz
    I have difficulty open opening word and excel files suddenly. Only particular office file give me the problem. These files were previously scanned by combo fix and I believe they were damaged. The error response that I from office is Excel cannot open the file xxx.xlsx because the file format is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file. This is for excel and a similar kind of error response comes for word. The file looks fine. I mean the size vise... Please help me with this problem. I really appreciate your help and time....

    Read the article

  • Analyzing Linux NFS server performance

    - by Kamil Kisiel
    I'd like to do some analysis of our NFS server to help track down potential bottlenecks in our applications. The server is running SUSE Enterprise Linux 10. The kind of things I'm looking to know are: Which files are being accessed by which clients Read/write throughput on a per-client basis Overhead imposed by other RPC calls Time spent waiting on other NFS requests, or disk I/O, to service a client I already know about the statistics available in /proc/net/rpc/nfsd and in fact I wrote a blog post describing them in depth. What I'm looking for is a way to dig deeper and help understand what factors are contributing to the performance seen by a particular client. I want to analyze the role the NFS server plays in the performance of an application on our cluster so that I can think of ways to best optimize it.

    Read the article

  • Tool to check if XML is valid in my VS2012 comments

    - by davidjr
    I am writing the documentation for our companies software developed with vs2012. I need to add xml examples to the summary of each class, due to xml instantiation of objects. We are using sandcastle to create the documentation (company choice), and I want to be able to review my xml comments without building the help file every time. Is there an application that anyone would recommend where I can view how the xml renders before I build the help file? Here is my example: /// <summary> /// Performs DFT on a data array, writes output in a CSV file. /// </summary> /// <example> /// <para>XML declaration</para> /// <code lang="xml" xml:space="preserve"> /// %lt;DataProvider name="DftDP" description="Computes DFT" etc... I want to check the XML to make sure it is valid, maybe by copy and pasting it into a tool of some sort?

    Read the article

  • 404 Not Found for a PL script that exists!

    - by Abs
    Hello all, I make a GET request to a CGI script and I get a 404 error. However, I am 100% sure that script is present and it has permissions: -rwxr-xr-x 1 apache apache 6520 Sep 7 03:01 uu_ini_status_audios.pl The request URL is: http://mysite.com/cgi-bin/uu_ini_status_audios.pl?tmp_sid=893facacc5dc392ad0f4c91e6a9e8d40&rnd_id=0.12266222834382812 The error I get: The requested URL /cgi-bin/uu_ini_status_audios.pl was not found on this server. This use to work for me before, but I think it stopped working after I restarted apache so maybe it means its a configuration I changed?? I checked the error logs for apache and php and nothing useful was found to help me with my problem! I appreciate any help on this!

    Read the article

  • Copying OS X account settings to new user account

    - by Donna Crain
    Hi I hope someone can help me... I accidentally renamed my own user name on my mac running OS X 10.4.11 and tried renaming back to what it was but now I have two accounts (the one I want to use which has all my preferences, applications, mail boxes, etc etc) is it possible to copy my settings from my original into this new user name? When I open my computer it defaults to this new account but everything is setting up from new and I just need to get access to all my work documents, mail settings etc. If there is anyone who could help out, I would be very grateful. Thank you in advance.

    Read the article

  • server shrinks html file to 0bytes on upload

    - by user38714
    Hi there, I have come across a very unusual problem. I am working on a website at the moment and whenever I upload a file to the server, it becomes a 0kb file. I have changed ftp software to filezilla to see would this help and it hasn't. I have compared it to other sites I am working on the permissions are the same numbers 0644 but on the site that I am having the trouble with the permissions have the prefix- flcdmpe(0644). Would this be the problem and if so any ideas how to change it?, changing the permissions doesn't work. I have been onto the host company and they cannot figure it out at all. Any help would be appreciated. Cheers Emma

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Virtual machine on ubuntu

    - by MITHIYA MOIZ
    I have configured virtual machine on ubuntu with the help of below article, https://help.ubuntu.com/9.04/serverguide/C/libvirt.html I managed to finish all the part except the major portion getting virtual host to talk to real network, Which I guess should be done only via bridge interface. Via virtual machine manager I try to choose any interface it gives me interface not bridged When I try to bridge the interceface eth0 as below auto br0 iface br0 inet static address 192.168.0.223 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off I cannot communicate with this interface to network, host server looses all the communication to network. But when I remote bridge interface from /etc/network/interfaces And configure eth0 as below it works fine The primary network interface auto eth0 iface eth0 inet static address 192.168.0.223 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 dns-nameservers 62.215.6.51 gateway 192.168.0.1 how can i setup bridge interface correctly and how would my /etc/netwrok/interfaces file would look a like.

    Read the article

  • Can't import contacts into Outlook from Excel

    - by Michael
    I run MS Office 2010. I have all contacts from a previous Outlook 2010 saved in an Excel sheet. I have tried dozens of time to import, but when Outlooks is supposed to do the mapping of the columns I only have one column in my CSV-file: firstname;middlename;surname, etc. It means I cannot map the data correctly. I have tried saving in MS-DOS and Tab and it does not get better. I have tried saving on another computer and it does help either. ALso tried importing to Gmail with same result. Can anyone help?

    Read the article

  • Integrate Python Projects Into Xcode

    - by Vynile
    Hi! I'm a Mac user, and one of my hobbies is programming. I use Xcode, the integrated IDE of Mac OS X. I started to learn Python programming langage, and I want to use Xcode for developing my scripts. I searched for weeks in the internet, but I didn't find something interesting. Firstly, I want to update the integrated interpreter of Mac OS X, that is on 2.6 version. And secondly, I want to create a Python project on Xcode easily, like I do with C & C++ projects. Can you help me? I really need help! Cordially.

    Read the article

  • How might I stop BACKSCATTER using Qmail?

    - by alecb
    New to ServerFault , please pardon if my details are too much Linux box acting as Virtual Host for domain hosting. Runs CentOs. Runs Parallels Plesk 9.x Regardless of the following, the SPAM keeps flowing in at 1-3 / second. An explanation of the problem... "xinetd service listens for SMTP connections and forwards to qmail-smtpd. The qmail service only process the queue, but does not control messages coming into the queue...that's why stopping it has no effect. If you stop xinetd AND qmail, then kill any open qmail-smtpd processes, all mail flow comes to a stop SOMETIMES Problem is, qmail-smtpd is not smart enough to check for valid mailboxes on the localhost before accepting the mail. So, it accepts bad mail with a forged replyto address which gets processed in the queue by qmail. Qmail cannot deliver locally and bounces to the forged replyto address." We believe the fix is to patch the qmail-smtpd process to give it the intelligence to check for the existence of local mailboxes BEFORE accepting the message. The problem is when we try to compile the chkuser patch we run into failures due to Plesk Control Panel." Is anyone aware of something we could do differently or better?" Other things that have NOT worked thus far: -Turning off any and all mail processes (to check as an indicator that an individual account has been compromised. This has been verified as NOT the case.) -Turning off mail AND http server processes (in the case of a compromised formmail) -Running EXIM in lieu of Qmail( easy/quick install but xinetd forces exim to close and restarts qmail on its own) -Turned on SPF protection via Plesk GUI. Does not help. -Turned on Greylisting via Plesk GUI. Does not help. -Disabled Bounce notifications via command line That which MIGHT work but have complications: -Use POSTFIX instead of QMAIL (No knowledge of POSTIFX and don't want to bother with it unless anyone knows it has potential to handle backscatter WELL before investing time) -As mentioned above, compiling a chkusr patch, we believe will STOP this problem, along with qmail (because of plesk in the mix, the comile fails every time and Parallels Plesk support is unresponsive unless I cough up MONEY) If I don't clear out the SPAM from the outgoing mail queue nightly, then it clogs up with millions of SPAMs and will bring down the OUTGOING email services. Any and all help welcome and appreciated!

    Read the article

  • Forgotten laptop windows login - what are my options?s

    - by Galwegian
    I have a (elderly) colleague who has forgotten the password to his laptop - he generally signs in as Administrator, but can't remember the password, and has asked my help. He says the laptop contains some important data. What are my options? Thanks for any help. EDIT: I have just got hold of the machine and not all is as I was told... The password is not the problem... Before the login box appears I get an error message relating to savedump.exe: The instruction at "0x0..." referenced memory at "0x0...". The memory could not be written. Then when I login using the proper credentials, It logs me in for a tiny second and then logs me out again and 'saves my settings'. Any ideas on this one?

    Read the article

  • My computer keeps crashing and I just want it FIXED

    - by xabaddon
    So long story short, I had my brother build me a computer for my birthday last year. I saw how good his was (also built by him) so I decided I would have him build me one. About a month after this was all finished, my computer started crashing when I when run over 3 programs. For example, an online game, a music player (spotify), skype, and a browser with a few tabs open. The way it would crash is the screen will freeze and a buzzing noise will come from whatever audio device I am using (headset, speakers) I took it to a computer tech guy and he told me my cooling system was inadequate. SOOO he led me to buy a CORSAIR H75 Liquid cooling system. Everything was good for about a week, and now it just did the same thing again. I am so freaking over this guys and I really need some help figuring out what the heck is wrong, I dont care how long it takes, just please help me.

    Read the article

  • Another installation is in progress

    - by Steven
    Why I try to install any program I see "Another installation is in progress. You must complete that installation before continuing this one." error. Googled the web and found that solution would be to delete HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress registry key and reboot. That didn't help me unfortunately. When I open "Services" mmc snapin it shows that "Windows Installer" service is "Started", but "Start/Stop/Pause/Restart" buttons are grayed (the interesting thing is that startup type = "Manual", so I don't really know how to explain that I already have 2 instances of msiexec.exe in memory and one instance is consuming 50Mb of memory. Looks like there's a serious issue with my installer service - is there any way to fix it (please do mind - I can't install anything!) Any help would be greatly appreciated.

    Read the article

  • How do I backup Firefox add-on like "Fastdial" addon for a reinstall?

    - by danacon
    I am doing a new install of Firefox and over the years my Windows "roaming folder" I use for backup has gotten all clogged up from so many add-ons and crap... I want to backup just a couple Firefox add-on's, one is "Fast dial" How do I backup this add-on and its addresses for when I reinstall Firefox and the add-on, so It will go back to where it is now? Most add-on's have a backup feature like "too many tabs" bookmarks and such but fast dial doesn't? so How do I backup this add-on? and /or addons like it without a backup feature? Thanks in advance any help or options would be a big help. Dana

    Read the article

  • Mouse button and keypress counter for Linux?

    - by rakete
    I would like to have some kind of statistic of my daily mouse/keyboard usage to help me make my keyboard layout a little bit more efficient. There is already an question about how to do this on windows, but I would like to know I anyone is aware if this is possible under linux. Another thing I already found is key-mon, a little program for screencasts that displays your mouse and keyboard presses on the screen, which would help me achieve what I want with a little bit of python coding by myself. But still, if there was an solution already, that would be easier of course. PS: obfuscated link to key-mon because of spam prevention: hxxp://code.google.com/p/key-mon/

    Read the article

  • How to setup heartbeat for IP fail over on SSH failure

    - by Tony
    I wonder if anyone can help me, I am trying to setup heartbeat on a redhat 5 to failover an IP address when ssh stops responding on a server. So basically you ssh to a VIP and then get put through which ever server has the floating ip. 192.168.0.100 | | /------------------------\ | /------------------------\ | Server 01 | | | Server 02 | | eth0 - 192.168.0.1 |-----/ | eth0 - 192.168.0.2 | | eth0:0 - 192.168.0.100 | | eth0:0 - down | \------------------------/ \------------------------/ if ssh stops responding i want eth0:0 to be brought up on the second machine to allow ssh connections to carry on being served. I have tried to follow some documents I have found online so here is my current configuration: ha.cf bcast eth0 keepalive 2 warntime 10 deadtime 30 initdead 120 udpport 694 auto_failback off node vm-bal01 node vm-bal02 debugfile /var/log/ha-debug logfile /var/log/ha-log authkeys auth 1 1 sha1 sshhhsecret1234 haresources server01 192.168.0.100/24/eth0:0/192.168.0.255 Hope someone can help as this is driving me nuts...

    Read the article

  • Load-balance with LAN and Wifi

    - by Synox
    I have a Mac, which runs Mac OSX 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wifi, one can be accessed via LAN. In OSX i can define the priority, which network to choose first. But what i wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused wifi routers if this would help. Compiling and configuring programms in linux is no problem for me. Thanks for any help.

    Read the article

  • Permission problem - users can't access main index.php anymore

    - by JMan
    From /var/www, I executed "chmod -R 774 ." and now none of my .php scripts are accessible. From my browser, when I type in mydomain.com or mydomain.com/test2.php or mydomain.com/test.php, I get the 403 Forbidden error msg. So, I changed the permissions of 3 of the .php scripts to 775, but this didn't help either. Here is the output from "ls -la /var/www": drwxrwxr-- 6 john wheel 4096 2010-09-29 17:38 . drwxr-xr-x 14 root root 4096 2010-09-27 21:15 .. -rwxrwxr-x 1 john wheel 3353 2010-09-29 05:29 index.php -rwxrwxr-x 1 john wheel 124 2010-09-27 23:12 .htaccess -rwxrwxr-x 1 john john 34 2010-09-29 17:39 test2.php -rwxrwxr-x 1 john john 26 2010-09-28 22:08 test.php The .htaccess file does a URL mod_rewrite so typing in index.php is not needed. Thanks for your help.

    Read the article

  • How to register putty public key on windows server 2003?

    - by igarren
    So we were trying to transfer files from unix server to a windows server 2003. I currently don't have any visibility on the unix server since it is being handled by another team. So in order for the 2 servers to establish connection, they sent us a public key which they said that we need to register on our windows server 2003 machine. can anyone help me? i cant seem to find anything about registering this public key generated by putty on a windows server 2003. there's no directory to put the public key(like in linux authorized_keys). Any help will be appreciated. thanks in advance. EDIT: we're trying to transfer file via pscp if this info is needed.

    Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >