Search Results

Search found 7555 results on 303 pages for 'sites'.

Page 253/303 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

  • Windows 7 hangs with 100% disk activity but only when online

    - by jeremy
    I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

    Read the article

  • Small office network setups

    - by user39822
    I work at a small office and we're overhauling our network setup there. We're a web dev company and at the moment we have 50+ production sites running on the same machine that runs our internal email, which is just plain stupid. We're moving all our client hosting off site and are now looking for something to run our internal office requirement. Below is a brain dump: Equal amount of Mac & PC, about 25 machines in total. We need a central "server" to host files that should be accessible everyone as a "network drive". If possible we'd like to use low cost hardware for this (Mac or Win based). Disk space should be upward of 1TB. Ideally we should also be able to run a small web server on this machine (LAMP stack) to run some planning and billing applications we wrote ourselves. We need some sort of MS Exchange alternative for things like a shared calendar and especially being able to set Out of Office replies. We have one printer that is connected to the network Setup should be something can preferably be managed easily via a graphical interface and NOT require command line skills. Users want to keep using Apple Mail or MS Outlook After a quick google I came across the Zimbra collaboration suite, can anyone recommend this or any other solution for our office?

    Read the article

  • No LAN and SMB access, and Explorer not responsive, when using a second connection

    - by Lorenzo
    I apologize if this is a duplicate question, I know that there are several questions about multiple connection (LAN + LAN and LAN + dialup) but I haven't been able to find one that fits my scenario. I'm still using Windows XP on my corporate laptop, and I'm connected to the corporate LAN via Ethernet. The LAN NIC has a public IP address, although not accessible externally, obtained via the corporate DNS server. This connection is firewalled and requires a proxy to access Internet. To access Internet sites blocked by the corporate firewall, I use my smartphone via USB tethering. It is seen as a new LAN interface, and I get a private IP address (class 192.168..). There are two problems: The LAN is not accessible, as the default gateway goes to the tethering NIC. I'd like to solve this, but I can live with it. My PC becomes unresponsive if I use Windows Explorer to view local files, or even when I open the start menu. I guess that this is caused by attemps to connect to a mapped network drive. But I disabled the "Client for Microsoft Networks" in the tethering NIC. Why the system still hangs? Of course if I disable the Ethernet NIC, Explorer stops hanging. If you need further details, add a comment. Thanks!

    Read the article

  • Nginx/puma rhel unix socket permission error?

    - by Kevin Brown
    When I try to start my puma server, I get the error: /.rvm/gems/ruby-2.1.1/gems/puma-2.9.0/lib/puma/binder.rb:275:in `initialize': Permission denied - connect(2) for "/var/run/nvhbase.sock" (Errno::EACCES) My sites-available/nvhbase.conf file: upstream nvhbase { server unix:/var/run/nvhbase.sock; } server { listen 80 default_server; server_name 207.131.132.219; root /home/vf032500/dev/nvh/public; location / { proxy_pass http://unix:/var/run/nvhbase.sock; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } I don't know a lot about unix sockets and everything works fine using tcp/puma default. My rails app is in my user directory. Is that the problem?? socket is starting in /var/run--I can start in /tmp, but I've heard that's bad practice? Provided I start the server in /tmp, I then can't access it via the server's ip--then what? I'm happy to provide any needed info, I just don't know a whole lot about server/nginx/puma.

    Read the article

  • Implementing an isolated guest WLAN via IPSec VPN on Windows

    - by sysadmin1138
    We are attempting to set up a guest WLAN network that is isolated from the rest of our network. This is proving difficult due to a couple of technical reasons. My first choice was to use a separate VLAN, on which our Firewall's handy WLAN port would handle DHCP, DNS and the network isolation we need. Unfortunately, due to the fact that our main office and our Internet connection itself are in different locations connected by way of a Metro Ethernet connection, I'm at the mercy of our ISP for VLAN transit. They won't pass a second VLAN between our two sites. And my hardware doesn't support 802.1ad "Q-in-Q", which would also solve this problem. So I can't use the VLAN method for isolation. At least not without spending money. As our Firewall can handle IPSec site-to-site VPN connections, I hope it is possible to connect a Server 2008R2 (standard) server I have in the office location to the WLAN and provide gateway services to the firewall. Thusly: Unfortunately, I don't know if it is possible to connect the two this way. The firewall has a pretty flexible IPSec/L2TP implementation (I've used it to connect iPads in the wild), but is neither Kerberized or supports NTLM. The Connection Security Rules view on the Windows server seems to get close to what I think needs to be done, but I'm failing on figuring out how to get it to do what I need it to do. Is this even possible, or do I need to pursue alternate solution?

    Read the article

  • Apache Bench reports different result with same page

    - by Aspis
    I'm running into a little problem base-lining an Apache2/fcgi/php-fpm server I am setting up. 1) If I run: ab -n 15000 http://mysite.com/index.php. Apache Bench returns Time per request: 41ms but document length: 0 bytes and html transferred: 0 bytes. The Transfer rate: 7.9Kb/s. 2) If I run: ab -n 15000 http://mysite.com/ Apache Bench returns Time per request: 83ms along with the accurate document length and html transferred total. The APC cache status reports identical hit counts from both test. Also Apache Bench reports no errors in either case. Overall, no errors on any test sites and all logs are clean, etc. DocumentRoot is set to index.php so I would expect both of these test runs to produced a similar result. My 2 question(s) are: 1) why the discrepancy? 2) which is the correct result? I've seen plenty of results like test 1 posted (with out question) but frankly from my own experience and those of others, accurate testing is hard to come by. Even with out goofy issues like this.

    Read the article

  • Getting custom web.config sections and their contents in Powershell

    - by Rob
    I have a web application installed in c:\inetpub\wwwroot_Site1\AppName which has a custom section group and section as follows: <configSections> <sectionGroup name="Libraries"> <section name="Custom.Section.Name" type="System.Configuration.NameValueSectionHandler,system, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null"/> <section name="Custom.Section.Name2" type="System.Configuration.NameValueSectionHandler,system, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null"/> </sectionGroup> </configSections> I've written the following snippet of Powershell: Import-Module WebAdministration Get-WebConfiguration //Libraries IIS:\Sites\Site1\AppName Which correctly returns: Name         Sections                           Groups ====          ========                        =========== Libraries    Custom.Section.Name                   Custom.Section.Name2 What I can't fathom is how to, either via Get-WebConfiguration or Get-WebConfigurationProperty obtain access to the <add key="x" value="y" /> elements that are direct children of CustomSectionName in the actual "body" of the configuration file.

    Read the article

  • Firefox window disappears

    - by Lord Torgamus
    Now this is odd. At some point in the last half hour, my Firefox window disappeared. I didn't notice, as I was working in another program at the time. No Firefox icon shows up with Alt-Tab, and no Firefox listing shows up under the Applications tab in the task manager. There is a Firefox entry under the Processes tab. Normally, I probably wouldn't have noticed, just opened Firefox up again, but I'm listening to an Internet radio station and the stream never stopped. When I did open a new Firefox window, it showed up in the Task Manager's applications tab. I'm running Windows XP, and my Firefox has the add-ons Adblock Plus, BetterPrivacy, Cert Viewer Plus, DOM Inspector, Firebug, Greasemonkey, Java Quick Starter, Live HTTP headers, Microsoft .NET Framework Assistant, NoScript, WebDeveloper and XPather. The radio station is Slacker; it's never given me any trouble before, and I've been using it for months. I don't think there was anything unusual in my open tabs; just a few static pages at non-sketchy sites like Java APIs, plus GMail and the aforementioned Slacker. Googling brought up a handful of similar-but-not-quite-the-same errors, none of which had useful resolutions. Does anyone know how to bring that window back and/or prevent this from happening again?

    Read the article

  • Computer Won't Boot Properly, unless in safe mode?

    - by Mr_CryptoPrime
    I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

    Read the article

  • Remove directory from URL IIS 7.5

    - by xalx
    I've tried to find a solution to this and found some guides out there but none seem to work. I have the following URL - http://www.mysite.com/aboutus.html However there are some other sites which link to my old hosted site and point to http://www.mysite.com/nw/aboutus.html. My issue here is trying to remove the 'nw' directory from the URL's. I have setup the following URL Rewrite in IIS but it does not seem to do anything, <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <rewrite> <rules> <rule name="Redirect all to root folder" enabled="true" stopProcessing="true"> <match url="^nw$|^/nw/(.*)$" /> <conditions> </conditions> <action type="Redirect" url="nw/{R:1}" /> </rule> <rule name="RewriteToFile"> <match url="^(?!nw/)(.*)" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> </conditions> <action type="Rewrite" url="/{R:1}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Any insight would be appreciated.

    Read the article

  • How to configure a large mtu (linux)

    - by Somejan
    I have a gigabit ethernet connection from my laptop to my router, and a working ipv6 connection to the internet. I can receive very large packets from sites on the internet, with sizes up to at least 10000 bytes (according to wireshark). (edit: turns out to be linux's 'generic receive offload') However, when trying to send anything, my local computer fragments at just below 1500 bytes for ipv6. (On ipv4, I can send tcp packets to the internet of at least 1514 bytes, I can ping with packets up to the configured mtu of 6128 but they are blackholed.) I'm on ubuntu 12.04. I have configured an mtu for my eth0 of 6128 (the maximum it accepts), both using ip link set dev eth0 mtu 6128 and in the NetworkManager applet gui, and restarted the connection. ip link show eth0 shows the 6128 mtu is indeed set. ip -6 route shows that none of the paths the kernel knows about have an mtu set. I can ping over ipv4 with packets up to 6128 bytes (though I don't get responses), but when I do ping6 myrouter -c3 -s1500 -Mdo I get error replies from my own computer saying that the packets are too large and the mtu is 1480. I have confirmed with Wireshark that nothing is put on the wire, and the replies are indeed generated by my own computer. So, how do I get my computer to use the larger mtu?

    Read the article

  • Rewrite a url on Nginx

    - by Ido B
    I tried to use this - location / { root /path.to.app/; index index.php index.html; rewrite ^/(.*)$ /check_register.php?key=$1 break; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /path.to.app/$fastcgi_script_name; include fastcgi_params; } And its didn't work , This is my full config - user www-data www-data; worker_processes 4; events { worker_connections 3072; } http { include mime.types; default_type application/octet-stream; access_log off; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 15; gzip on; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; server { listen 80; server_name localhost; location / { root html; index index.html index.htm; } location / { root /path.to.app/; index index.php index.html; rewrite ^/(.*)$ /check_register.php?key=$1 break; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /path.to.app/$fastcgi_script_name; include fastcgi_params; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } include /usr/local/nginx/sites-enabled/*; } How can i make it work?

    Read the article

  • What are the "least legally restrictive" well-connected countries to host a website?

    - by monster
    NB: I am aware that this question is subjective, as it can't be defined precisely, but the answers should still be "objective": Country name, and what makes it legally safer. EDIT: A) I am located in Germany. B) I am NOT looking for a place to offer pirated Software/Media; no binary on my site, except "profile icon". Hello! I want to start publishing "social" websites / apps, and I found that the biggest initial problem is this: Any and all services I have to depend on, including Domain Registrar, DNS provider, Server/Cloud Provider, CDN Provider, ... even my Insurance Agent, basically say that they can "throw me out" if my website contains "unacceptable" content. It's always phrased in such a way that basically anything can fall under "unacceptable" content. This is very frustrating because you just can't fully control what users post on your "social website", and you so you basically have to expect when you go to bed that your site is going to be gone when you wake up. I've heard a lot of horror stories about this. Since the "Terms Of Service" of all those providers are foremost to protect themselves from legal actions, and those legal actions depend on the country where they are located, it seems like the first step is to find which country is the "safest" to locate a site. "Safest" being defined as, where I am least likely to get in legal trouble with the local authorities, if some user posts something unacceptable in some way. The main restriction is that it should also be a "well-connected" country, because there is no point in being "safe", if my users can't get to my sites, or the latency is unacceptable. I am targeting the English speaking people in any country as my future users.

    Read the article

  • Connecting to same public IP from different locations yields different results

    - by DHall
    Since yesterday I've been unable to access one of my favorite time-wasting sites, boston.com. It starts to load but then it gets redirected to pagesinxt or something like that. After some investigation, I've narrowed it down to an issue with cache.boston.com, but only from my work location. I found the IP (216.38.160.107) , but even that doesn't work correctly from here at work. When I do a telnet 216.38.160.107 80 GET http://cache.boston.com/universal/css/hp_bgcom.css from another location, I get a nice long CSS, as expected. From here, I get an error (trimmed for size): HTTP/1.1 400 Bad Request Your request could not be processed. Request could not be handled This could be caused by a misconfiguration, or possibly a malformed request. For assistance, contact your network support team. Is there any way I can troubleshoot this further on my end? Tracert doesn't tell me anything too useful: Tracing route to vwrpx1.ttn.xpc-mii.net [216.38.160.107] over a maximum of 30 hops: 1 * * * Request timed out. Since it's not really work-related, I don't really want to bring it up to our network team unless I know what's going on, or if there's some risk to the network (ex. malware or something)

    Read the article

  • Apache2 doesn't serve PHP-scripts correctly

    - by cmbrnt
    I've run into a problem with my Apache 2.2.16 configuration, running on Debian Squeeze. The problem is that it stopped serving PHP5-scripts completely. When I try to access the sites with Google Chrome, it instead downloads a file called "download", which contains the contents of the script. This is of course not a good thing. It does serve common html-files perfectly... I've been at this for quite a while now, and after all the googling and troubleshooting, I thought it would be a good time to ask you guys. Here's what I've got: The php5 and libapache2-mod-php5 packages are installed /etc/apache2/mods-available contains both php5.load and php5.conf, and these are symlinked from the mods-enabled directory The /etc/php5/ directory is left untouched since the installation. Here's the contents of /etc/apache2/mods-available/php.load: LoadModule php5_module /usr/lib/apache2/modules/libphp5.so And /etc/apache2/mods-available/php.conf: <IfModule mod_php5.c> <FilesMatch "\.ph(p3?|tml)$"> SetHandler application/x-httpd-php </FilesMatch> <FilesMatch "\.phps$"> SetHandler application/x-httpd-php-source </FilesMatch> <IfModule mod_userdir.c> <Directory /home/*/public_html> php_admin_value engine Off </Directory> </IfModule> </IfModule> What am I missing? This is a server with modified virtual hosts and the like, so I might have changed some settings which causes this problem, but simply purging and reinstalling is not an option so far, since the configuration is quite extensive. Any help would be great. Thanks.

    Read the article

  • configuration issue with respect to .htaccess file on ubuntu

    - by Registered User
    I am building an application tshirtshop I have following configuration in /etc/apache2/sites-enabled/tshirtshop <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/tshirtshop <Directory /var/www/tshirtshop> Options Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> and following in .htaccess file in location /var/www/tshirtshop/.htaccess <IfModule mod_rewrite.c> # Enable mod_rewrite RewriteEngine On # Specify the folder in which the application resides. # Use / if the application is in the root. RewriteBase /tshirtshop #RewriteBase / # Rewrite to correct domain to avoid canonicalization problems # RewriteCond %{HTTP_HOST} !^www\.example\.com # RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L] # Rewrite URLs ending in /index.php or /index.html to / RewriteCond %{THE_REQUEST} ^GET\ .*/index\.(php|html?)\ HTTP RewriteRule ^(.*)index\.(php|html?)$ $1 [R=301,L] # Rewrite category pages RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2&Page=$3 [L] RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2 [L] # Rewrite department pages RewriteRule ^.*-d([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&Page=$2 [L] RewriteRule ^.*-d([0-9]+)/?$ index.php?DepartmentId=$1 [L] # Rewrite subpages of the home page RewriteRule ^page-([0-9]+)/?$ index.php?Page=$1 [L] # Rewrite product details pages RewriteRule ^.*-p([0-9]+)/?$ index.php?ProductId=$1 [L] </IfModule> the site is working on localhost and is working as if there is no .htaccess rule specified i.e. if I were to view a page as http://localhost/tshirtshop/nature-d2 then I get a 404 Error but if I view the same page as http://localhost/tshirtshop/index.php?DepartmentId=2 then I can view it. What is the mistake if any one can point out in above configuration, or else I need to check any thing else? sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) reqtimeout_module (shared) rewrite_module (shared) setenvif_module (shared) status_module (shared) Syntax OK I am using Apache2 on Ubuntu 12.04

    Read the article

  • Internal Code Signing: Key Distribution, or Certificate Server?

    - by Myrddin Emrys
    I should first note that we have nobody in IT with significant familiarity with self-signed certification. We have a moderately sprawling network (one forest, many locations), and we are now rolling out internal code signing; until now users have run untrusted code, or we even disabled(!) the warnings. Intranet applications, scripts, and sites will now be signed with self certification. I am aware of two obvious ways we can deploy this: Distributing the keys directly via a group policy, and setting up a cert server. Can someone explain the trade-offs between these two methods? How many certs before the group policy method is unwieldy? Are they large enough that remote users will have issues? Does the group policy method distribute duplicates on every login? Is there a better method I am not aware of? I can find a lot of documentation on certifications and various ways to create them, but I have not been able to find something that summarizes the difference between the distribution methods and what criteria make one or the other superior.

    Read the article

  • git : The remote end hung up unexpectedly - too many simultaneous users?

    - by Pritam Barhate
    I asked this first on StackOverflow and I was suggested that I should ask it here: We have a self hosted git server (Gitolite) on a VPS account (CPU:2.68GHz RAM:1824MB). This same VPS is also used to publish our underdevelopment web apps for client demos. (Very little traffic). so the main use of the server is as a Git Server Only. This git server is accessed by a team of 30-40 people for various projects. Our problem is that during the day when 6-7 people are trying to access the server (sometimes same repo) we get frequent error message: ssh: connect to host xxx.xxx.xx.xx port 22: Bad file number fatal: The remote end hung up unexpectedly After trying for 10-15 minutes it generally succeeds. During early mornings and late nights when there are only 1-2 people, git commands work with 100% success rate. Also I would like to note that if I access the other file hosted on the server through HTTP it works fine. I found a couple of questions on StackOverflow and on other sites regarding this. But most of the people point towards SSH key set up or conflicts between Msysgit and Cygns SSH. However I don't think this is the problem in our case as we get this behavior on Windows (using msysgit only) as well as Mac Machines. Also if it was SSH configuration issue then it shouldn't work at all. But in our case it works after 10-15 minutes. I think in our case it might be too many simultaneous connections to same server (or same repo) or something like that. Does there exists a setting or a conf file that needs to modified to solve this problem? Please help me solve this problem or point me in the right direction. Thanks in advance. Pritam.

    Read the article

  • Automated Syslog Error Solution Finder

    - by Dru
    Any automated syslog solution finding frameworks? I want my central syslog server to email a list of problems, their severity and suggested solutions. There have been several questions about centralising system logs and alternative log analysis systems, but I don't get the impression that any of them help with issue resolution. A little background: At work I am now literally doing the work of two people, and both jobs have expanded beyond their initial frameworks. It is not so bad as I have helpers, but they are little more than smart monkeys. While one of my predecessors [I have two, that is how I know I have the jobs of two people] set-up logwatch to email its results out, my monkeys don't have the skills necessary to identify unimportant data. This has caused all of them, and myself sadly, to setup email filters and ignore the whole thing until something goes "bang". It would be handy to have someone else tell them what is important, what is connected, and to suggest a few ways to resolve the issue (I could train then to research the solution first, ha!). My reading of the Splunk and Octopussy sites indicates that I still need to bring my own highly trained monkey to the party. Which I am several years from having.

    Read the article

  • Server 2003 and XP Client; Why are HTTP connections being silently dropped.

    - by Asa Yeamans
    On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

    Read the article

  • Automated Syslog Error Solution Finder

    - by Dru
    Any automated syslog solution finding frameworks? I want my central syslog server to email a list of problems, their severity and suggested solutions. There have been several questions about centralising system logs and alternative log analysis systems, but I don't get the impression that any of them help with issue resolution. A little background: At work I am now literally doing the work of two people, and both jobs have expanded beyond their initial frameworks. It is not so bad as I have helpers, but they are little more than smart monkeys. While one of my predecessors [I have two, that is how I know I have the jobs of two people] set-up logwatch to email its results out, my monkeys don't have the skills necessary to identify unimportant data. This has caused all of them, and myself sadly, to setup email filters and ignore the whole thing until something goes "bang". It would be handy to have someone else tell them what is important, what is connected, and to suggest a few ways to resolve the issue (I could train then to research the solution first, ha!). My reading of the Splunk and Octopussy sites indicates that I still need to bring my own highly trained monkey to the party. Which I am several years from having.

    Read the article

  • Nginx order of servers

    - by scrat
    I have 3 sites on my server. All are running on gunicorn and use unix sockets to communicate with nginx which routes requests. I got three records in nginx.conf like: server { listen 80; server_name site1.com; location / { proxy_pass http://unix:/tmp/site1.sock; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } For site1, site2, site3. If they are ordered as config for site1 goes first, and then goes config for site2 and site3 everything works good. But when I change the order for example to site2, site1, site3, then site1 becomes routed to site2. What am I doing wrong? Full server nginx.conf before servers configs: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon;

    Read the article

  • This web site needs a different Google Maps API key. A new key can be generated at http://code.googl

    - by MJI
    Apologies in advance if this is the wrong place to post. I tried searching for this issue and all that seemed to come up were questions posted from people who had this issue with their web pages. I couldn't find questions related to this issue from a laypersons perspective. I'm not a developer. I have no domain, nor wish to have one at the time. Rather I'm just a regular person who likes to upload photos to some photo related sites. My uploading process constantly gets interrupted by one of these annoying API errors. I get it at least two times, one when I click the page to upload, and also right after it has uploaded. It also pops up if I go to edit a photo or delete it. This interrupts my browsing experience until I click okay. I just want a fix for the annoying without having to register for a key. I tried before and it required a web domain. I rather not have to create a domain and go through such hoops just to fix this. Is there a solution for this problem that doesn't require registration? Another thing to note: I have used two computers. One has the message pop-up and the other doesn't. What is different about the two computers?

    Read the article

  • IIS7 can't read web.config on shared Mac filesystem

    - by RobG
    I'm running a VirtualBox virtualized Windows 2008 Server on my Mac, just finished setting it up today. On it, I have SQL Server 2008, IIS and ColdFusion 9. I want to serve websites from my Mac filesystem (for development purposes). So I created a new website in IIS and pointed it at the appropriate path using a UNC path: \vboxsvr\rob\Sites\testsite, which contains the ColdFusion code and a web.config file. When I attempt to modify the file at all, or view the site in a web browser, I get an error: HTTP 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. I did some Googling, and found several similar problems, but nothing exactly like I have. The closest one seemed to indicate permissions. So I recreated the site and set it up to allow the Administrator (in Windows) to access the stuff. That didn't help. I can read/modify the files just fine from within Windows, but IIS itself can't seem to do it. What do I need to do to fix this? Thanks!

    Read the article

  • Recommended offline on-demand virus scanners

    - by ashh
    I have never run full anti-virus on my Windows XP systems. Instead I use various anti-malware tools to manually perform scans every few weeks. This approach, combined with Windows updates and general care about what web-sites I visit and what files I download has kept me 99% free of problems. The remaining 1% has occurred when I download files that I know may contain malware, but still decide the risk is worth it. When on 2 occasions in 10 years I did get caught doing this, I realised that being able to easily scan them would most likely have avoided getting infected. I don't need, or want, to run a "stay resident" anti-virus. Also, the online scanners such as Kaspersky etc limit uploads to small files, so these are not always useful. In summary I would like to simply be able to download a file and then manually initiate an on demand anti-virus scan, on the downloaded file only. I'm sure some/most Anti-Virus do both, however once again I don't really want to pay for or need the stay resident part. Any recommendations (commercial or free)? UPDATE: This is not an exact duplicate, nor a possible duplicate. I searched for and read other questions on anti-virus here at SuperUser and found none that answered my question. I am specifically asking about anti-virus scanners that run ON-DEMAND locally on the computer, not online scanners.

    Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >