Search Results

Search found 11961 results on 479 pages for 'boot arguments'.

Page 254/479 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Fixing damaged partition table

  - by dr4cul4

  This is continuation of Recover Extended Partition , but this time I have different problem related partition table it self. I managed to restore partition that I needed and backed up files that were crucial to me (at least those that I had space to store somewhere) OK now get to the problem. My partition table is corrupted, booting RIP Linux I can mount it in truecrypt (and other ones that recovered), but that's basically it. When I launch GParted I have unallocated drive. GParted Dev info: Device Information Model: ATA ST2000DL003-9VT1 Size: 1.82TiB Path: /dev/sda Partition table: unrecognized Heads: 255 Sectors/track: 63 Cylinders: 243201 Total Sectors: 3907029168 Sector size: 512 When I check information on unallocated space I get: File system: unallocated Size: 1.82TiB First sector: 0 Last sector: 3907029167 Total sectors: 3907029168 Warning: Can't have a partition outside the disk! Now the output of testdisc (Analyze): TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Partition Start End Size in sectors > 1 P Linux 13132 242 39 16353 233 8 51744768 2 E extended LBA 16807 223 1 243201 254 63 3637021626 No partition is bootable 5 L Linux 16807 223 57 20430 39 25 58191872 X extended 20430 70 1 243201 78 13 3578816632 Invalid NTFS or EXFAT boot 6 L HPFS - NTFS 20430 71 58 243201 78 13 3578816512 6 LNext Now fdisk: # fdisk -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00039cd0 Device Boot Start End Blocks Id System /dev/sda1 210980864 262725631 25872384 83 Linux /dev/sda2 270018504 3907040129 1818510813 f W95 Ext'd (LBA) /dev/sda5 270018560 328210431 29095936 83 Linux /dev/sda6 328212480 3907028991 1789408256 7 HPFS/NTFS/exFAT Now I would like to fix that to arrange partitions correctly, but I have no idea which tool is capable of fixing that (tried, a few, some of them offered fixing, but it was to risky at the moment - still backing up data).

  Read the article

• Solaris 10: How to remove devices from a zpool with /usr currently mounted?

  - by cali-spc

  I use Solaris 10 on SPARC. I have /usr legacy mounted on a zpool 'usr-pool'. I now need to move some of the devices in usr-pool to another zpool which is running out of room. What is the safest way for me to do this? I already know that (since my zpool is not mirrored) I need to destroy and recreate the zpool. I know how to backup and restore a zfs snapshot. However... I'm stumped on how to unmount usr-pool without losing access to the commands I need on /usr to complete the backup/restore. Cursory research indicated that I should boot to OpenBoot (init 0) and then 'boot cdrom -s'. I did this but none of the zpools are accessible on that runlevel. I also read I could just copy /usr to another location, symlink /usr to that location, then do my backup/restore. Is that safe to do? I would appreciate some guidance. S.

  Read the article

• initrd problem and Kernel panics after openSUSE 11.2 upgrade.

  - by unixbhaskar

  Once I have done the upgrade form openSUSE11.1 to openSUSE11.2 by doing this: zypper dup Now I tried to boot the system and it failed sync with VFS and kernel panic, so clearly a initrd problem . if I'm not mistaken. Now a bit of explanation about the problem: while upgrading it shows me the error updating initramfs( I forgot the exact error or might be warning).Oh yeah it shows some grub warning too. I have had been doing that from a chroot environment.. with all the required file mounted in proper place in the chroot environment. Now .after bit googling and painfully looking the susegeek.com forum and opensuse.org forum I have decided to recreate the initrd ...but the fellow called "mkinitrd" is real real crap as I hev been pointed out by few forum members. I tried to make an initrd image by myself, failed to do so .as it shows error that device not found( if I boot into suse live cd and mount the partition ) then I tried from the chrooted env and it says "there is no space left on the device" A bit bemused :( yeah most of you pointed it right may lack of knowledge of mine. Kindly suggest me and show me steps to do it correctly and get opensuse11.2 up and running. TIA

  Read the article

• How to correctly setup home directories and permissions on a mounted partition.

  - by user36505

  I'm setting up a Fedora 12 server. I have a root (/) partition where the boot (/boot) partition is mounted and then a separate partition (/files) for separating home directories and shares away from the other partitions. The filesystem mounts fine and users can be created to have home directories in /files/home/[user] just fine. However, when I log in as one of those users, I get an error saying "Cannot chdir in to /files/home/[user]: permission denied". If I create a user under the default /home using the same process, everything works fine. The same goes for when I try and browse a share in windows; I can see the shares, but cannot access them. The permissions and owners on /files and /files/home are the same as /home. When the user is created, the user directory owner and permissions are also the same. How can I set the /files partition up so that it can be used as a home directory and for samba sharing rather than using the root (/) partition? Thanks.

  Read the article

• PCI configuration method error (Linux Kernel)

  - by user326580

  (I'm not sure if here is the best place for that question, so I will be pleased if anyone suggests me a more proper forum for that.) I'm trying to install Ubuntu 12.04.4 in a netbook (from an usb), but the kernel stops very early in initialization process. After two days of research, I've found that it boots with the parameter pci=conf2 but not with the default conf1 method. Nevertheless, after kernel boot, it seems that Ubuntu can't find usb devices and I'm not be able to install it. Trying with Debian, its a graphic installer and I found that the mouse isn't working neither.I think pci devices are not working. I tried about 50% of kernel pci boot options in the kernel-parameters file (in conjunction with the implicit default conf1) without luck. Any suggestions? PS: The problem is the same with kernel 2.6 or 3. (In Spanish) No estoy seguro si éste es el mejor lugar para esta pregunta, por lo cual estaré encantado si alguno me sugiere un mejor lugar para ella. Estoy intentando instalar Ubuntu 12.04.4 en una netbook (desde un usb), pero el kernel se detiene muy temprano en la inicialización. Después de dos días de investigar, encontré que arranca con el parámetro pci=conf2 pero no con método default conf1. Sin embargo después de que el kernel arranca, parece que Ubuntu no logra encontrar los dispositivos usb y no puedo instalar el sistema. Intentando con Debian y su instalador gráfico, encontré que el ratón tampoco funcionaba, así que pienso que los dispositivos pci no están funcionando. Intenté con aproximadamente el 50% de las opciones de arranque del kernel para pci (en conjunción con el método implícito conf1) sin suerte. Alguna idea? PS: El problema es el mismo con el kernel 2.6 o 3.

  Read the article

• How to automatically start VM created by virt-manager?

  - by Jeff Shattock

  I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Windows Server 2008 R2 Standard to Enterprise Problems

  - by boburob

  A few months ago I setup a Citrix XenApp cluster running on Windows Server 2008 R2 Standard Edition using the temporary 180 day license key. Recently the company bought a Windows Server 2008 R2 Enterprise DataCenter license. This means I need to upgrade the Windows edition from Standard to Enterprise. I attach the disk to the VM and start the upgrade process through XenCenter, it runs through all checks and unpacks all Windows files and seems to create a Windows Setup partition, it then reboots and trys to boot into this partition and I get a blue screen telling me to CHKDSK the hard drive with the following error message: STOP: 0x0000007B As XenApp is already setup and working I really do not want to go down the route of rebuilding this server (as I already had to do this once down to issues with XenApp). The server did have 8GB of RAM assigned to it, I have tried reducing this down to 2GB's as I read this can cause an issue. Also I can boot back into the Windows Server 2008 R2 Standard partition without any problems. UPDATE I have managed to get round the urgency by re-arming the license, giving me another 180 day trial..but would be nice to work out why this is happening!

  Read the article

• How to fix Truecrypt MBR using Command Prompt or Linux live USB?

  - by Michal Stefanow

  I was playing with TrueCrypt and decided to make a fresh installation of Windows 7 from USB stick. Unfortunately Windows 7 installer: "setup was unable to create a new system partition" My entire HDD has been formatted and is visible as 320GB unallocated space, but no fdisk nor Windows 7 installer nor Windows XP installer could help. (Windows XP doesn't even see the HDD, it sees only USB stick and says "not enough space to install") It may be related to Truecrypt and pre-boot authentification, boot loader and/or MBR. As I don't have optical device I could not have created rescue disk. Right now I need a rescue of some kind, supposingly by erasing/fixing MBR using Linux live USB or using Command Promt. Another approach is to click "repair your comuter" menu from Windows 7 installer then click "restore your computer", then click OK upon error and get access to Command Prompt. Yet another another approach is to start computer without Linux USB I receive this: error:unknown filesystem. grub rescue> Any help would be greatly appreciated as my laptop is kind of not fully operational now. UPDATE: This was asked long time ago, ended up formatting everything (eventually it worked using different bootable USB)...

  Read the article

• How can I create two partitions and clone one to the other (using Clonezilla)?

  - by johnny

  I was hoping someone could help. I want to create a "backup" partition. I want to create two partitions on my drive. One is a good install, which I want to then use clonezilla to copy the good partition to the broken/unused partition and have the restored partition boot up as usual. Example, C: goes bad. D: is a "good" copy of C. C gets a corrupt registry. I restore D to C, C will then boot up as usual. So, I need to do the clone with Clonezilla and the restore with the same. I see the part_...clone and restore. Will this do it? How do I get the partitions? EDIT: I am using XP. How can I do this? Also, I know this is not the best thing for all occasions. I have a offline backup as well. I would like to have both. Thanks for any help. I'm using Clonezilla if it matters.

  Read the article

• Assembling Software RAID in Live CD for data recovery

  - by Maletor

  I need help recovering some data that's on my RAID which is on a LVM on my server running Ubuntu. What happened was I deleted the logical volume that controlled my swap space which was on a partition on drives sda2, sdb2, sdc2, and sdd2 in RAID1. This foobared my whole system for one reason or another. Booting leave me with grub rescue and an error saying that it is an unknown filesystem. When I boot to a live cd I can see my RAID arrays and I can even start them up. However, it doesn't appear to mount them anywhere so I can't see the data. I am in the live cd now and I have done sudo apt-get install mdadm lvm2 so it should be mounting them correctly. I just can't see why it wouldn't. Please any help is appreciated here. Here is some output. By the way, there are 3 RAIDs, 1) /boot 100mb RAID1, 2) swap 10gb RAID1, 3) root 990GB RAID5 ubuntu@ubuntu:~$ df -h Filesystem Size Used Avail Use% Mounted on aufs 124M 101M 18M 86% / none 2.0G 324K 2.0G 1% /dev /dev/sde1 2.0G 826M 1.2G 42% /cdrom /dev/loop0 667M 667M 0 100% /rofs none 2.0G 164K 2.0G 1% /dev/shm tmpfs 2.0G 28K 2.0G 1% /tmp none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw /dev/md1 91M 73M 15M 84% /media/5ac3dbf1-a6c5-409c-96ae-edc6e27992c7 ubuntu@ubuntu:~$ cat /etc/fstab aufs / aufs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda2 swap swap defaults 0 0 /dev/sdb2 swap swap defaults 0 0 /dev/sdc2 swap swap defaults 0 0 /dev/sdd2 swap swap defaults 0 0

  Read the article

• Deleting old system folders from a drive that is no longer the windows installation drive

  - by grenade

  I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

  Read the article

• How to prevent an SSD from disappearing from BIOS

  - by Midimatt

  I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

  Read the article

• XFS: No space left on device

  - by beketa

  I am using XFS on small HDD (/dev/sdb1, less than 1TB) and storing many small files (-32KB). df -h and -i show that it has available space. # df -hv Filesystem Size Used Avail Use% Mounted on /dev/sda3 127G 19G 102G 16% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 168K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 99M 20M 75M 21% /boot /dev/sdb1 136G 123G 14G 91% /mnt/sdb1 # df -iv Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 8421376 36199 8385177 1% / tmpfs 4126158 5 4126153 1% /lib/init/rw udev 4124934 671 4124263 1% /dev tmpfs 4126158 1 4126157 1% /dev/shm /dev/sda1 26112 222 25890 1% /boot /dev/sdb1 24905120 11076608 13828512 45% /mnt/sdb1 However I got No space left on device error. # touch /mnt/sdb1/test touch: cannot touch `/mnt/sdb1/test': No space left on device I think inode64 issue is not related to this case because drive is less than 1TB and df -i shows that there are free inodes. I unmounted and mounted with -o inode64 but got the same error. xfs_repair does not report any problem. xfs_info shows drive information as follows. # xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=16, agsize=2227764 blks = sectsz=512 attr=2 data = bsize=4096 blocks=35644210, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=17404, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Any ideas? Thanks!

  Read the article

• Can I install windows on an SSD and access data from my old windows HDD?

  - by nzifnab

  I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

  Read the article

• Problem with Amiga 1200 accelerator board

  - by cc0

  I just recently walked past a dump, where in the corner of my eye I spotted something that looked like a huge keyboard. I went to take a closer look, and found out that it was an Amiga 1200 with a 030 accellerator board and scala dongle. Jackpot! So anyway; I dried it, cleaned it, it works, but the floppy was not powering on and same with the harddrive. I am using an old Amiga 1200 PSU that was making some strange high pitch noise when I tried to boot the amiga with the harddrive installed in it. I removed the harddrive and it booted fine with the PSU not emitting any detectable noise. However, when I have the 030 installed it sometimes reboots and shows a red "Software Error" screen. I tried removing the memory on the board, same effect. Sometimes it does not boot at all, just gives a black screen. Someone suggested the card had problems with 3.1 roms, but this amiga has only 3.0 roms installed. Does anyone have any apparent theories as to why it seems unstable? I don't have any other Amiga parts to cross-swap with to test a lot of things, so I'd really appreciate some sound input here so I'd know what to look for in order to try fix it. And merry Christmas everyone :]

  Read the article

• Static IP addressing issue in Ubuntu on BeagleBoneBlack Rev C

  - by Stringfellow

  I have my BBB configured to use a static IP address using the following in the file /etc/network/interfaces: allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask 255.255.255.0 network 192.168.0.0 This seems to work ok on boot, but when the ethernet cable is unplugged and then plugged back in, I lose the IP address. Any ideas what's going on here? Another weird symptom: If I boot the BBB with the network cable unplugged, but the switch it's plugged into off, I'll get my static IP. But, when I turn the switch on, I'll get a DHCP-assigned address. This is even though I have it configured with a static IP address. One last thing. If I ifdown etho, the interface will be gone when I do an ifconfig. If I wait a few seconds, though, and then re-run ifconfig, it will reappear, without an IP address. (Before I disabled IPv6, I used to get a IPv4 DHCP address in this case... weird). When that happens, I get a message like this in /var/log/messages: Apr 23 20:32:06 beaglebone kernel: [ 737.170172] libphy: 4a101000.mdio:00 - Link is Up - 100/Full Apr 23 20:32:06 beaglebone kernel: [ 737.170304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Here's my uname -a: root@beaglebone:/etc# uname -a Linux beaglebone 3.8.13-bone47 #1 SMP Fri Apr 11 01:36:09 UTC 2014 armv7l GNU/Linux Any ideas what's going on here?

  Read the article

• Repeated installation of malicious software to do outbound DDOS attack [duplicate]

  - by user224294

  This question already has an answer here: How do I deal with a compromised server? 12 answers We have a Ubuntu Vitual Private Server hosted by a Canadian company. Out VPS was affected to do "outbound DDOS attack" as reported by server security team. There are 4 files in /boot looks like iptable, please note that the capital letter "I","L". VPS:/boot# ls -lha total 1.8M drwx------ 2 root root 4.0K Jun 3 09:25 . drwxr-xr-x 22 root root 4.0K Jun 3 09:25 .. -r----x--x 1 root root 1.1M Jun 3 09:25 .IptabLes -r----x--x 1 root root 706K Jun 3 09:23 .IptabLex -r----x--x 1 root root 33 Jun 3 09:25 IptabLes -r----x--x 1 root root 33 Jun 3 09:23 IptabLex We deleted them. But after a few hours, they appeared again and the attack resumed. We deleted them again. They resurfaced again. So on and so forth. So finally we have to disable our VPS. Please let us know how can we find the malicious script somewhere in the VPS, which can automatically install such attcking software? Thanks.

  Read the article

• Almost All Logical Volumes Disappeared - Recovery?

  - by Alex

  We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

  Read the article

• 4GB Memory Upgrade for Acer Aspire 5102WLMi

  - by Richard Slater

  I have bought a 4GB memory upgrade (2x 2GB PC2-5300 SODIMM) for my Acer Aspire 5102WLMi (Aspire 5100 Series) laptop, I installed the two memory modules correctly however with 4GB installed the laptop refuses to POST. I have tried the following: Tried both 2GB SODIMMs without the other (Worked Fine) Tried the original 512MB SODIMMs (Worked Fine) Tried with original 512MB SODIMM and new 2GB SODIMM (Worked Fine) Tried swapping over the 2GB SODIMs (Didn't Boot) Left the computer for 10 minutes with both 2GB SODIMMs installed (Didn't Boot) Checked latest BIOS installed (No Change) The Crucial website said that the laptop supported 4GB of RAM as do several other sites through found through Google, up until now I was fairly confident this would work. Couple of questions that would be good to have answered: Question: Has anyone got an Acer Aspire 5100 Series running with 4GB RAM? Answer: Yes, I have now got one working with 3.75GB Usable, the rest is occupied utilized by the Graphics Card. Question: Any tips on getting this to work; is there a CMOS reset switch? Answer: Yes there is, if both SODIMMs are removed two very small interlocking PCB tracks are revealed. If these are shorted together with a screwdriver the BIOS will be reset. Thanks.

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• trying to setup multiple primary partitions on ubuntu linux [migrated]

  - by JohnMerlino

  I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

  Read the article

• Install Peppermint OS three on Asus EeePC

  - by Kithoth

  I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• I (stupidly) converted a TrueCrypt encrypted disk to GPT in Disk Management: now TrueCrypt won't mount it

  - by asilentfire

  Backstory: After moving a Macrium Reflect disk image from my TrueCrypt external drive (with whole disk encryption) onto a unencrypted drive and using Windows PE with Macrium Reflect to restore my internal disk to the recovery image on the external unencrypted drive, my Windows 8 failed to boot. I then went back and also recovered the System Partition (looking now, it is currently EFI), but I still couldn't boot into my backup.. I was in a hurry to get online for something so I just did a clean install of Windows 8, without the backup.. After I installed Windows 8, I went into Disk Management out of curiosity to see if there were other partitions with Windows 8 that Macruim might have missed, and there is (by default) a Recovery Partition of 100MB. My memory of this is hazy, as I was trying to get up and running for an exam at 4 AM: Something in Disk Management prompted me to convert my encrypted external drive to GPT.. I have no idea why I did this, but I went ahead and allowed it to convert my TrueCrypt drive to GPT. Now, I can't mount the drive in TrueCrypt.. Disk Management sees it as Disk 1, Basic, and Unallocated. I tried converting it back to MBR with Disk Management, but no dice with TrueCrypt :( If I try to mount the disk in TrueCrypt I get the message: Incorrect password or not a TrueCrypt volume I should never have messed with a Truecrypt drive in Disk Management, but I did. I have important college work in that drive, and fear I have lost it forever. PLEASE HELP

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >