Search Results

Search found 6638 results on 266 pages for 'boost range'.

Page 255/266 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• ASP.NET MVC 2 client-side validation rules not being created

  - by Brant Bobby

  MVC isn't generating the client-side validation rules for my viewmodel. The HTML just contains this: <script type="text/javascript"> //<![CDATA[ if (!window.mvcClientValidationMetadata) { window.mvcClientValidationMetadata = []; } window.mvcClientValidationMetadata.push({"Fields":[],"FormId":"form0","ReplaceValidationSummary":false}); //]]> </script> Note that Fields[] is empty! My view is strongly-typed and uses the new strongly-typed HTML helpers (TextBoxFor(), etc). View Model / Domain Model public class ItemFormViewModel { public Item Item { get; set; } [Required] [StringLength(100)] public string Whatever { get; set; } // for demo } [MetadataType(typeof(ItemMetadata))] public class Item { public string Name { get; set; } public string SKU { get; set; } public int QuantityRequired { get; set; } // etc. } public class ItemMetadata { [Required] [StringLength(100)] public string Name { get; set; } [Required] [StringLength(50)] public string SKU { get; set; } [Range(0, Int32.MaxValue)] public int QuantityRequired { get; set; } // etc. } (I know I'm using a domain model as my / as part of my view model, which isn't a good practice, but disregard that for now.) View <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<ItemFormViewModel>" %> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>Editing item: <%= Html.Encode(Model.Item.Name) %></h2> <% Html.EnableClientValidation(); %> <%= Html.ValidationSummary("Could not save the item.") %> <% using (Html.BeginForm()) { %> <%= Html.TextBoxFor(model => model.Item.Name) %> <%= Html.TextBoxFor(model => model.Item.SKU) %> <%= Html.TextBoxFor(model => model.Item.QuantityRequired) %> <%= Html.HiddenFor(model => model.Item.ItemID) %> <%= Html.TextBox("Whatever", Model.Whatever) %> <input type="submit" value="Save" /> <% } %> </asp:Content> I included the Whatever property on the view model because I suspected that MVC wasn't recursively inspecting the sub-properties of ItemFormViewModel.Item, but even that isn't being validated? I've even tried delving into the MVC framework source code but have come up empty. What could be going on?

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections

  - by Hammer Bro.

  Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• If record exists in database, UPDATE a single column

  - by Doug

  I have a bulk uploading object in place that is being used to bulk upload roughly 25-40 image files at a time. Each image is about 100-150 kb in size. During the upload, I've created a for each loop that takes the file name of the image (minus the file extension) to write it into a column named "sku". Also, for each file being uploaded, the date is recorded to a column named DateUpdated, as well as some image path data. Here is my c# code: protected void graphicMultiFileButton_Click(object sender, EventArgs e) { //graphicMultiFile is the ID of the bulk uploading object ( provided by Dean Brettle: http://www.brettle.com/neatupload ) if (graphicMultiFile.Files.Length > 0) { foreach (UploadedFile file in graphicMultiFile.Files) { //strip ".jpg" from file name (will be assigned as SKU) string sku = file.FileName.Substring(0, file.FileName.Length - 4); //assign the directory where the images will be stored on the server string directoryPath = Server.MapPath("~/images/graphicsLib/" + file.FileName); //ensure that if image existes on server that it will get overwritten next time it's uploaded: file.MoveTo(directoryPath, MoveToOptions.Overwrite); //current sql that inserts a record to the db SqlCommand comm; SqlConnection conn; string connectionString = ConfigurationManager.ConnectionStrings["DataConnect"].ConnectionString; conn = new SqlConnection(connectionString); comm = new SqlCommand("INSERT INTO GraphicsLibrary (sku, imagePath, DateUpdated) VALUES (@sku, @imagePath, @DateUpdated)", conn); comm.Parameters.Add("@sku", System.Data.SqlDbType.VarChar, 50); comm.Parameters["@sku"].Value = sku; comm.Parameters.Add("@imagePath", System.Data.SqlDbType.VarChar, 300); comm.Parameters["@imagePath"].Value = "images/graphicsLib/" + file.FileName; comm.Parameters.Add("@DateUpdated", System.Data.SqlDbType.DateTime); comm.Parameters["@DateUpdated"].Value = DateTime.Now; conn.Open(); comm.ExecuteNonQuery(); conn.Close(); } } } After images are uploaded, managers will go back and re-upload images that have previously been uploaded. This is because these product images are always being revised and improved. For each new/improved image, the file name and extension will remain the same - so that when image 321-54321.jpg was first uploaded to the server, the new/improved version of that image will still have the image file name as 321-54321.jpg. I can't say for sure if the file sizes will remain in the 100-150KB range. I'll assume that the image file size will grow eventually. When images get uploaded (again), there of course will be an existing record in the database for that image. What is the best way to: Check the database for the existing record (stored procedure or SqlDataReader or create a DataSet ...?) Then if record exists, simply UPDATE that record so that the DateUpdated column gets today's date. If no record exists, do the INSERT of the record as normal. Things to consider: If the record exists, we'll let the actual image be uploaded. It will simply overwrite the existing image so that the new version gets displayed on the web. We're using SQL Server 2000 on hosted environment (DiscountAsp). I'm programming in C#. The uploading process will be used by about 2 managers a few times a month (each) - which to me is not a allot of usage. Although I'm a jr. developer, I'm guessing that a stored procedure would be the way to go. Just seems more efficient - to do this record check away from the for each loop... but not sure. I'd need extra help writing a sproc, since I don't have too much experience with them. Thank everyone...

  Read the article

• Why does my macbook pro have long ping times over wifi?

  - by randynov

  I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

  Read the article

• Using bindings to control column order in a DataGrid

  - by DanM

  Problem I have a WPF Toolkit DataGrid, and I'd like to be able to switch among several preset column orders. This is an MVVM project, so the column orders are stored in a ViewModel. The problem is, I can't get bindings to work for the DisplayIndex property. No matter what I try, including the sweet method in this Josh Smith tutorial, I get: The DisplayIndex for the DataGridColumn with Header 'ID' is out of range. DisplayIndex must be greater than or equal to 0 and less than Columns.Count. Parameter name: displayIndex. Actual value was -1. Is there any workaround for this? I'm including my test code below. Please let me know if you see any problems with it. ViewModel code public class MainViewModel { public List<Plan> Plans { get; set; } public int IdDisplayIndex { get; set; } public int NameDisplayIndex { get; set; } public int DescriptionDisplayIndex { get; set; } public MainViewModel() { Initialize(); } private void Initialize() { IdDisplayIndex = 1; NameDisplayIndex = 2; DescriptionDisplayIndex = 0; Plans = new List<Plan> { new Plan { Id = 1, Name = "Primary", Description = "Likely to work." }, new Plan { Id = 2, Name = "Plan B", Description = "Backup plan." }, new Plan { Id = 3, Name = "Plan C", Description = "Last resort." } }; } } Plan Class public class Plan { public int Id { get; set; } public string Name { get; set; } public string Description { get; set; } } Window code - this uses Josh Smith's DataContextSpy <Window x:Class="WpfApplication1.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:WpfApplication1" xmlns:mwc="http://schemas.microsoft.com/wpf/2008/toolkit" Title="Main Window" Height="300" Width="300"> <Grid> <mwc:DataGrid ItemsSource="{Binding Plans}" AutoGenerateColumns="False"> <mwc:DataGrid.Resources> <local:DataContextSpy x:Key="spy" /> </mwc:DataGrid.Resources> <mwc:DataGrid.Columns> <mwc:DataGridTextColumn Header="ID" Binding="{Binding Id}" DisplayIndex="{Binding Source={StaticResource spy}, Path=DataContext.IdDisplayIndex}" /> <mwc:DataGridTextColumn Header="Name" Binding="{Binding Name}" DisplayIndex="{Binding Source={StaticResource spy}, Path=DataContext.NameDisplayIndex}" /> <mwc:DataGridTextColumn Header="Description" Binding="{Binding Description}" DisplayIndex="{Binding Source={StaticResource spy}, Path=DataContext.DescriptionDisplayIndex}" /> </mwc:DataGrid.Columns> </mwc:DataGrid> </Grid> </Window> Note: If I just use plain numbers for DisplayIndex, everything works fine, so the problem is definitely with the bindings. Update 5/1/2010 I was just doing a little maintenance on my project, and I noticed that when I ran it, the problem I discuss in this post had returned. I knew that it worked last time I ran it, so I eventually narrowed the problem down to the fact that I had installed a newer version of the WPF Toolkit (Feb '10). When I reverted to the June '09 version, everything worked fine again. So, I'm now doing something I should have done in this first place: I'm including the WPFToolkit.dll that works in my solution folder and checking it into version control. It's unfortunate, though, that the newer toolkit has a breaking change.

  Read the article

• asp.net detailsview update method not getting new values

  - by Ali

  Hi all, I am binding a detailsview with objectdatasource which gets the select parameter from the querystring. The detailsview shows the desired record, but when I try to update it, my update method gets the old values for the record (and hence no update). here is my detailsview code: <asp:DetailsView ID="dvUsers" runat="server" Height="50px" Width="125px" AutoGenerateRows="False" DataSourceID="odsUserDetails" onitemupdating="dvUsers_ItemUpdating"> <Fields> <asp:CommandField ShowEditButton="True" /> <asp:BoundField DataField="Username" HeaderText="Username" SortExpression="Username" ReadOnly="true" /> <asp:BoundField DataField="FirstName" HeaderText="First Name" SortExpression="FirstName" /> <asp:BoundField DataField="LastName" HeaderText="Last Name" SortExpression="LastName" /> <asp:BoundField DataField="Email" runat="server" HeaderText="Email" SortExpression="Email" /> <asp:BoundField DataField="IsActive" HeaderText="Is Active" SortExpression="IsActive" /> <asp:BoundField DataField="IsOnline" HeaderText="Is Online" SortExpression="IsOnline" ReadOnly="true" /> <asp:BoundField DataField="LastLoginDate" HeaderText="Last Login" SortExpression="LastLoginDate" ReadOnly="true" /> <asp:BoundField DataField="CreateDate" HeaderText="Member Since" SortExpression="CreateDate" ReadOnly="true" /> <asp:TemplateField HeaderText="Membership Ends" SortExpression="ExpiryDate"> <EditItemTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("ExpiryDate") %>'></asp:TextBox> <cc1:CalendarExtender ID="TextBox1_CalendarExtender" runat="server" Enabled="True" TargetControlID="TextBox1"> </cc1:CalendarExtender> </EditItemTemplate> <InsertItemTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("ExpiryDate") %>'></asp:TextBox> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label1" runat="server" Text='<%# Bind("ExpiryDate") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> </Fields> and here is the objectdatasource code: <asp:ObjectDataSource ID="odsUserDetails" runat="server" SelectMethod="GetAllUserDetailsByUserId" TypeName="QMS_BLL.Membership" UpdateMethod="UpdateUserForClient"> <UpdateParameters> <asp:Parameter Name="User_ID" Type="Int32" /> <asp:Parameter Name="firstName" Type="String" /> <asp:Parameter Name="lastName" Type="String" /> <asp:SessionParameter Name="updatedByUser" SessionField="userId" DefaultValue="1" /> <asp:Parameter Name="expiryDate" Type="DateTime" /> <asp:Parameter Name="Email" Type="String" /> <asp:Parameter Name="isActive" Type="String" /> </UpdateParameters> <SelectParameters> <asp:QueryStringParameter DefaultValue="1" Name="User_ID" QueryStringField="User_ID" Type="Int32" /> </SelectParameters> </asp:ObjectDataSource> Is the OnItemUpdating method still required when you have your custom BLL method called on insertevent? (which is being executed fine in my case but updating with the old values) or am I missing something else? Also I tried to provide an OnItemUpdating method and in there I tried to capture the contents of the textboxes (the new values). I got an exception: "Specified argument was out of the range of valid values. Parameter name: index" when I tried to do: TextBox txtFirstName = (TextBox)dvUsers.Rows[1].Cells[1].Controls[0]; Any help will be most appreciated.

  Read the article

• What git branching models actually work - the final question

  - by UncleCJ

  In our company we have successfully deployed git and we are currently using a simple trunk/release/hotfixes branching model. However, this has it's problems, I have some key issues of confusion in the community which would be awesome to have answered here. Maybe my hopes for an Alexander stroke are too great, quite possibly I'll decompose this question into more manageable issues, but here's my first shot. Workflows / branching models - below are the three main descriptions of this I have seen, but they are partially contradicting each other or don't go far enough to sort out the subsequent issues we've run into (as described below). Thus our team so far defaults to not so great solutions. Are you doing something better? gitworkflows(7) Manual Page (nvie) A successful Git branching model (reinh) A Git Workflow for Agile Teams Merging vs rebasing (tangled vs sequential history) - the bids on this are as confusing as it gets. Should one pull --rebase or wait with merging back to the mainline until your task is finished? Personally I lean towards merging since this preserves a visual illustration of on which base a task was started and finished, and I even prefer merge --no-ff for this purpose. It has other drawbacks however. Also many haven't realized the useful property of merging - that it isn't commutative (merging a topic branch into master does not mean merging master into the topic branch). I am looking for a natural workflow - sometimes mistakes happen because our procedures don't capture a specific situation with simple rules. For example a fix needed for earlier releases should of course be based sufficiently downstream to be possible to merge upstream into all branches necessary (is the usage of these terms clear enough?). However it happens that a fix makes it into the master before the developer realizes it should have been placed further downstream, and if that is already pushed (even worse, merged or something based on it) then the option remaining is cherry-picking, with it's associated perils... What simple rules like such do you use? Also in this is included the awkwardness of one topic branch necessarily excluding other topic branches (assuming they are branched from a common baseline). Developers don't want to finish a feature to start another one feeling like the code they just wrote is not there anymore How to avoid creating merge conflicts (due to cherry-pick)? What seems like a sure way to create a merge conflict is to cherry-pick between branches, they can never be merged again? Would applying the same commit in revert (how to do this?) in either branch possibly solve this situation? This is one reason I do not dare to push for a largely merge-based workflow. How to decompose into topical branches? - We realize that it would be awesome to assemble a finished integration from topic branches, but often work by our developers is not clearly defined (sometimes as simple as "poking around") and if some code has already gone into a "misc" topic, it can not be taken out of there again, according to the question above? How do you work with defining/approving/graduating/releasing your topic branches? Proper procedures like code review and graduating would of course be lovely, but we simply cannot keep things untangled enough to manage this - any suggestions? integration branches, illustration please? Vote and comment as much as you'd like, I'll try to keep the issue page clear and informative enough. Thanks! Below is a list of related topics on stackoverflow I have checked out: What are some good strategies to allow deployed applications to be hotfixable? Workflow description for git usage for in-house development Git workflow for corporate Linux kernel development How do you maintain development code and production code? (thanks for this PDF!) git releases management Git Cherry-pick vs Merge Workflow How to cherry-pick multiple commits How do you merge selective files with git-merge? How to cherry pick a range of commits and merge into another branch ReinH Git Workflow git workflow for making modifications you’ll never push back to origin Cherry-pick a merge Proper Git workflow for combined OS and Private code? Maintaining Project with Git Why cant Git merge file changes with a modified parent/master. Git branching / rebasing good practices When will "git pull --rebase" get me in to trouble?

  Read the article

• Diagramming Software for a Developer/Designer

  - by Craig Walker

  For a long time I've been looking for a good diagramming/vector-based drawing program that meets my needs as a developer. I'd like to: Draw database diagrams Draw flow charts Draw object-modeling diagrams (UML being the standard) Draw other free-form diagrams (basically boxes & arrows with the occasional clipart) Draw mockups of user interfaces and web pages EDIT: I want good-looking electronic-format diagrams that I can show to 3rd parties, not just something for my own internal use. EDIT 2: I'm also looking for Windows software, although I'm toying with the idea of switching to Mac, so a really good Mac-only product might get me to switch. Basically I need a good vector graphic program (with decent grouping, connecting lines, and ideally auto-routing). I'd prefer a diagramming tool that can also be used for drawing (for the UI mockups) rather than a drawing tool that can also be used for diagrams. I've tried Visio on several occasions, and every time I've been disappointed. The interface always seems to get in my way at some point. It's pretty close to what I want, and the latest version (I got the trail from MS) seems to be better than previous ones in terms of usability, but I really don't want to plunk down that sort of cash for a mediocre product. I've tried Dia and Inkscape, and while initially promising and with the right price tag, I found both of them to be lacking in several ways (including some recurring bugs). I've toyed with getting Adobe Illustrator, but I've never used it before, and I have a feeling that it wouldn't handle the diagramming aspect very well, and I don't want to buy a copy just to find out it doesn't meet my needs. So far, the product that I've had the most success with is, sadly, OpenOffice Draw. It's free of course (which lowers my expectations and thus improves my view of it) and its usability is pretty good, but in the end I'd like something more suited to diagramming. I'm willing to spend real money (in the $500-$1K range) for a really good piece of software if it does everything I want it to. The front runner is of course Visio but I'm hoping for more. Does anybody have any recommendations? CONCLUSION: @dlamblin had the most informative post, but the part I gained the most from was his/her (and others) mention of OmniGraffle, not Gliffy. I gave Gliffy a try, and it seemed neet for occational use, but since it's a Flash app (note: not AJAX as dlamblin mentioned) it's still a bit of a pain to use (no keyboard shortcuts for copy/paste was pretty much a deal breaker for me). I also tried SmartDraw, but it had 3-strikes-you're-out against it: The trial period was only 7 days long. It used some nonstandard (and visually jarring) GUI widget toolkit for its UI. At the very least it makes me suspicious (how do I know it will actually work & support the standard Windows features?) It crashed on me early into my trial. OmniGraffle looks like exactly what I want... except that it's Mac-only (so I couldn't give it a try). However, it got good reviews from my Mac-owning coworker, and I hope to try it on a friend's Mac soon. If it's good enough then I might spring for a new MacBook.

  Read the article

• Emulating old-school sprite flickering (theory and concept)

  - by Jeffrey Kern

  I'm trying to develop an oldschool NES-style video game, with sprite flickering and graphical slowdown. I've been thinking of what type of logic I should use to enable such effects. I have to consider the following restrictions if I want to go old-school NES style: No more than 64 sprites on the screen at a time No more than 8 sprites per scanline, or for each line on the Y axis If there is too much action going on the screen, the system freezes the image for a frame to let the processor catch up with the action From what I've read up, if there were more than 64 sprites on the screen, the developer would only draw high-priority sprites while ignoring low-priority ones. They could also alternate, drawing each even numbered sprite on opposite frames from odd numbered ones. The scanline issue is interesting. From my testing, it is impossible to get good speed on the XBOX 360 XNA framework by drawing sprites pixel-by-pixel, like the NES did. This is why in old-school games, if there were too many sprites on a single line, some would appear if they were cut in half. For all purposes for this project, I'm making scanlines be 8 pixels tall, and grouping the sprites together per scanline by their Y positioning. So, dumbed down I need to come up with a solution that.... 64 sprites on screen at once 8 sprites per 'scanline' Can draw sprites based on priority Can alternate between sprites per frame Emulate slowdown Here is my current theory First and foremost, a fundamental idea I came up with is addressing sprite priority. Assuming values between 0-255 (0 being low), I can assign sprites priority levels, for instance: 0 to 63 being low 63 to 127 being medium 128 to 191 being high 192 to 255 being maximum Within my data files, I can assign each sprite to be a certain priority. When the parent object is created, the sprite would randomly get assigned a number between its designated range. I would then draw sprites in order from high to low, with the end goal of drawing every sprite. Now, when a sprite gets drawn in a frame, I would then randomly generate it a new priority value within its initial priority level. However, if a sprite doesn't get drawn in a frame, I could add 32 to its current priority. For example, if the system can only draw sprites down to a priority level of 135, a sprite with an initial priority of 45 could then be drawn after 3 frames of not being drawn (45+32+32+32=141) This would, in theory, allow sprites to alternate frames, allow priority levels, and limit sprites to 64 per screen. Now, the interesting question is how do I limit sprites to only 8 per scanline? I'm thinking that if I'm sorting the sprites high-priority to low-priority, iterate through the loop until I've hit 64 sprites drawn. However, I shouldn't just take the first 64 sprites in the list. Before drawing each sprite, I could check to see how many sprites were drawn in it's respective scanline via counter variables . For example: Y-values between 0 to 7 belong to Scanline 0, scanlineCount[0] = 0 Y-values between 8 to 15 belong to Scanline 1, scanlineCount[1] = 0 etc. I could reset the values per scanline for every frame drawn. While going down the sprite list, add 1 to the scanline's respective counter if a sprite gets drawn in that scanline. If it equals 8, don't draw that sprite and go to the sprite with the next lowest priority. SLOWDOWN The last thing I need to do is emulate slowdown. My initial idea was that if I'm drawing 64 sprites per frame and there's still more sprites that need to be drawn, I could pause the rendering by 16ms or so. However, in the NES games I've played, sometimes there's slowdown if there's not any sprite flickering going on whereas the game moves beautifully even if there is some sprite flickering. Perhaps give a value to each object that uses sprites on the screen (like the priority values above), and if the combined values of all objects w/ sprites surpass a threshold, introduce the sprite flickering? IN CONCLUSION... Does everything I wrote actually sound legitimate and could work, or is it a pipe dream? What improvements can you all possibly think with this game programming theory of mine?

  Read the article

• Convert NSData to primitive variable with ieee-754 or twos-complement ?

  - by William GILLARD

  Hi every one. I am new programmer in Obj-C and cocoa. Im a trying to write a framework which will be used to read a binary files (Flexible Image Transport System or FITS binary files, usually used by astronomers). The binary data, that I am interested to extract, can have various formats and I get its properties by reading the header of the FITS file. Up to now, I manage to create a class to store the content of the FITS file and to isolate the header into a NSString object and the binary data into a NSData object. I also manage to write method which allow me to extract the key values from the header that are very valuable to interpret the binary data. I am now trying to convert the NSData object into a primitive array (array of double, int, short ...). But, here, I get stuck and would appreciate any help. According to the documentation I have about the FITS file, I have 5 possibilities to interpret the binary data depending on the value of the BITPIX key: BITPIX value | Data represented 8 | Char or unsigned binary int 16 | 16-bit two's complement binary integer 32 | 32-bit two's complement binary integer 64 | 64-bit two's complement binary integer -32 | IEEE single precision floating-point -64 | IEEE double precision floating-point I already write the peace of code, shown bellow, to try to convert the NSData into a primitive array. // self reefer to my FITS class which contain a NSString object // with the content of the header and a NSData object with the binary data. -(void*) GetArray { switch (BITPIX) { case 8: return [self GetArrayOfUInt]; break; case 16: return [self GetArrayOfInt]; break; case 32: return [self GetArrayOfLongInt]; break; case 64: return [self GetArrayOfLongLong]; break; case -32: return [self GetArrayOfFloat]; break; case -64: return [self GetArrayOfDouble]; break; default: return NULL; } } // then I show you the method to convert the NSData into a primitive array. // I restrict my example to the case of 'double'. Code is similar for other methods // just change double by 'unsigned int' (BITPIX 8), 'short' (BITPIX 16) // 'int' (BITPIX 32) 'long lon' (BITPIX 64), 'float' (BITPIX -32). -(double*) GetArrayOfDouble { int Nelements=[self NPIXEL]; // Metod to extract, from the header // the number of element into the array NSLog(@"TOTAL NUMBER OF ELEMENTS [%i]\n",Nelements); //CREATE THE ARRAY double (*array)[Nelements]; // Get the total number of bits in the binary data int Nbit = abs(BITPIX)*GCOUNT*(PCOUNT + Nelements); // GCOUNT and PCOUNT are defined // into the header NSLog(@"TOTAL NUMBER OF BIT [%i]\n",Nbit); int i=0; //FILL THE ARRAY double Value; for(int bit=0; bit < Nbit; bit+=sizeof(double)) { [Img getBytes:&Value range:NSMakeRange(bit,sizeof(double))]; NSLog(@"[%i]:(%u)%.8G\n",i,bit,Value); (*array)[i]=Value; i++; } return (*array); } However, the value I print in the loop are very different from the expected values (compared using official FITS software). Therefore, I think that the Obj-C double does not use the IEEE-754 convention as well as the Obj-C int are not twos-complement. I am really not familiar with this two convention (IEEE and twos-complement) and would like to know how I can do this conversion with Obj-C. In advance many thanks for any help or information.

  Read the article

• The HTML5 doctype is not triggering standards mode in IE8

  - by El Guapo

  i work for a company where all our sites currently use the XHTML 1.0 transitional doctype (yes i know it is very old school). I want to change them all to use the HTML5 doctype seeing as it is backwards compatible. One of the reasons why i want to make the switch is because in IE8 if someone has the developer tools installed then the old XHTML doctype switches the browser into compatibility mode and renders the page as IE7. From reading up on it i was led to believe that the HTML5 doctype will set any page to render in standards mode, but this is not happening when i test it on our staging server it still flips into IE7 rendering mode. The weird thing is if i save the page with HTML5 doctype locally and open it, it is rendering in IE8 standards mode. There must be something else causing it to drop into compatibility IE7 rendering. Any ideas what this could be? Below is the head of the test page i have been looking at: <!DOCTYPE html > <html xmlns="http://www.w3.org/1999/xhtml" xmlns:og="http://opengraphprotocol.org/schema/" xmlns:fb="http://www.facebook.com/2008/fbml"> <head> <title>Burton - Mens Clothing - Mens Fashion - Burton Menswear</title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta name="description" content="Burton is one of the UK's leading men's clothing &amp; fashion retailers, with a range of men's clothing designed to make you look &amp; feel good. Find formal &amp; casual clothes &amp; accessories for men online at Burton menswear"/> <meta name="keywords" content="menswear, clothes for men, clothing for men, men clothes, men's fashion, men's wear, men's clothing online, men's clothes online, men's clothes shop, burton men's, burton menswear, burton uk, burton"/> <script type="text/javascript">document.getElementsByTagName('html')[0].className = 'js';</script> <link rel="stylesheet" type="text/css" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/screen.css" /> <link rel="stylesheet" type="text/css" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/print.css" media="print"/> <link rel="stylesheet" type="text/css" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/brand.css" /> <!--[if lt IE 8]> <link rel="stylesheet" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/ie.css" type="text/css" media="screen, projection"> <![endif]--> <meta http-equiv="content-language" content="en-gb" /> <link rel="shortcut icon" type="image/x-icon" href="http://eu.burton-menswear.com/favicon.ico" /> <link rel="search" type="application/opensearchdescription+xml" title="burton.co.uk Search" href="http://eu.burton-menswear.com/burton-search.xml"/> <!-- Start Summit Tag --> <script type="text/javascript"> var __stormJs = "t1.stormiq.com/dcv4/jslib/3286_D92B7532_4A18_46A8_864A_5FDF1DF25844.js"; </script> <script type="text/javascript" src="http://eu.burton-menswear.com/javascript/track.js"></script> <!-- End Summit Tag --> <!-- Start QuBit Tag --> <script src=//d3c3cq33003psk.cloudfront.net/opentag-31935-42109.js async defer></script> <!-- End QuBit Tag --> <link type="text/css" rel="stylesheet" href="http://reviews.br.wcstage.arcadiagroup.ltd.uk/bvstaging/static/6028-en_gb/bazaarvoice.css" ></link> </head>

  Read the article

• Overflow - what am I doing wrong?

  - by ClarkeyBoy

  Hi, I have been working on trying to get a page to display a title at the top of the content pane, and then a scrollable list of products below that so that the title of the product range is displayed at all times. I am sure this is a very simple thing to do - but cannot figure it out. Currently the actual page (not the test page for which the code is given below) works ok in the sense that I set the heading div to 5% of the height of .content-container and then set the scrollable div to 95% with top: 5%, both with position: absolute applied. - however I would like to place some links in the heading div to different pages (1, 2, 3 etc), which I would like to centre vertically if they are shorter than the heading and expand the heading div to match the height of the heading or the links, whichever is smallest. Furthermore I would like the div below the heading to shrink so that it doesn't go below the bottom of the content div as the heading div gets taller. The point of this is because it is for a client who may, or may not, be happy with the heading sizes and so on - therefore the heading div height could easily change. Specifying heights so precisely means that changing the h1 height could mean 5 changes to the CSS file - something I want to avoid. The content pane currently has its height fixed to 80% of the page, with the header and footer being 10% each on top of that, so there is no scrollbar at the side of the page and the header / footer are always showing. This is something I would like to keep. In the code below, .content-container is the main content pane - this is contained in another div which is centred using the margin at 50% of the page width. .test-div is the div which contains the heading. .test-div-2 is an attempt to place a div below .test-div, in the hope that I can force .test-div-3 to extend to 100% of its' height but no further, and to display a scrollbar if the content exceeds the height. So far I have the following, but it doesn't do exactly what I would like it to: <div class="content-container"> <div class="test-div"> <h1 style="text-align: center;">Dogs</h1> </div> <div class="test-div-2"> <div class="test-div-3"> //Content here </div> </div> </div> .content-container { position: absolute; width: 100%; height: 100%; left: 0; right: 0; bottom: 0; overflow: auto; } .test-div { position: relative; padding: 0; margin: 0; } .test-div-2 { position: relative; background-color: #CCCCCC; } .test-div-3 { max-height: 100%; background-color: #999999; } Any help with this would be greatly appreciated. I would like to achieve this without the use of JavaScript / jQuery if possible - pure HTML / CSS solutions only please! Regards, Richard

  Read the article

• Python bindings for a vala library

  - by celil

  I am trying to create python bindings to a vala library using the following IBM tutorial as a reference. My initial directory has the following two files: test.vala using GLib; namespace Test { public class Test : Object { public int sum(int x, int y) { return x + y; } } } test.override %% headers #include <Python.h> #include "pygobject.h" #include "test.h" %% modulename test %% import gobject.GObject as PyGObject_Type %% ignore-glob *_get_type %% and try to build the python module source test_wrap.c using the following code build.sh #/usr/bin/env bash valac test.vala -CH test.h python /usr/share/pygobject/2.0/codegen/h2def.py test.h > test.defs pygobject-codegen-2.0 -o test.override -p test test.defs > test_wrap.c However, the last command fails with an error $ ./build.sh Traceback (most recent call last): File "/usr/share/pygobject/2.0/codegen/codegen.py", line 1720, in <module> sys.exit(main(sys.argv)) File "/usr/share/pygobject/2.0/codegen/codegen.py", line 1672, in main o = override.Overrides(arg) File "/usr/share/pygobject/2.0/codegen/override.py", line 52, in __init__ self.handle_file(filename) File "/usr/share/pygobject/2.0/codegen/override.py", line 84, in handle_file self.__parse_override(buf, startline, filename) File "/usr/share/pygobject/2.0/codegen/override.py", line 96, in __parse_override command = words[0] IndexError: list index out of range Is this a bug in pygobject, or is something wrong with my setup? What is the best way to call code written in vala from python? EDIT: Removing the extra line fixed the current problem, but now as I proceed to build the python module, I am facing another problem. Adding the following C file to the existing two in the directory: test_module.c #include <Python.h> void test_register_classes (PyObject *d); extern PyMethodDef test_functions[]; DL_EXPORT(void) inittest(void) { PyObject *m, *d; init_pygobject(); m = Py_InitModule("test", test_functions); d = PyModule_GetDict(m); test_register_classes(d); if (PyErr_Occurred ()) { Py_FatalError ("can't initialise module test"); } } and building with the following script build.sh #/usr/bin/env bash valac test.vala -CH test.h python /usr/share/pygobject/2.0/codegen/h2def.py test.h > test.defs pygobject-codegen-2.0 -o test.override -p test test.defs > test_wrap.c CFLAGS="`pkg-config --cflags pygobject-2.0` -I/usr/include/python2.6/ -I." LDFLAGS="`pkg-config --libs pygobject-2.0`" gcc $CFLAGS -fPIC -c test.c gcc $CFLAGS -fPIC -c test_wrap.c gcc $CFLAGS -fPIC -c test_module.c gcc $LDFLAGS -shared test.o test_wrap.o test_module.o -o test.so python -c 'import test; exit()' results in an error: $ ./build.sh ***INFO*** The coverage of global functions is 100.00% (1/1) ***INFO*** The coverage of methods is 100.00% (1/1) ***INFO*** There are no declared virtual proxies. ***INFO*** There are no declared virtual accessors. ***INFO*** There are no declared interface proxies. Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: ./test.so: undefined symbol: init_pygobject Where is the init_pygobject symbol defined? What have I missed linking to?

  Read the article

• Why C# doesn't implement indexed properties ?

  - by Thomas Levesque

  I know, I know... Eric Lippert's answer to this kind of question is usually something like "because it wasn't worth the cost of designing, implementing, testing and documenting it". But still, I'd like a better explanation... I was reading this blog post about new C# 4 features, and in the section about COM Interop, the following part caught my attention : By the way, this code uses one more new feature: indexed properties (take a closer look at those square brackets after Range.) But this feature is available only for COM interop; you cannot create your own indexed properties in C# 4.0. OK, but why ? I already knew and regretted that it wasn't possible to create indexed properties in C#, but this sentence made me think again about it. I can see several good reasons to implement it : the CLR supports it (for instance, PropertyInfo.GetValue has an index parameter), so it's a pity we can't take advantage of it in C# it is supported for COM interop, as shown in the article (using dynamic dispatch) it is implemented in VB.NET it is already possible to create indexers, i.e. to apply an index to the object itself, so it would probably be no big deal to extend the idea to properties, keeping the same syntax and just replacing this with a property name It would allow to write that kind of things : public class Foo { private string[] _values = new string[3]; public string Values[int index] { get { return _values[index]; } set { _values[index] = value; } } } Currently the only workaround that I know is to create an inner class (ValuesCollection for instance) that implements an indexer, and change the Values property so that it returns an instance of that inner class. This is very easy to do, but annoying... So perhaps the compiler could do it for us ! An option would be to generate an inner class that implements the indexer, and expose it through a public generic interface : // interface defined in the namespace System public interface IIndexer<TIndex, TValue> { TValue this[TIndex index] { get; set; } } public class Foo { private string[] _values = new string[3]; private class <>c__DisplayClass1 : IIndexer<int, string> { private Foo _foo; public <>c__DisplayClass1(Foo foo) { _foo = foo; } public string this[int index] { get { return _foo._values[index]; } set { _foo._values[index] = value; } } } private IIndexer<int, string> <>f__valuesIndexer; public IIndexer<int, string> Values { get { if (<>f__valuesIndexer == null) <>f__valuesIndexer = new <>c__DisplayClass1(this); return <>f__valuesIndexer; } } } But of course, in that case the property would actually return a IIndexer<int, string>, and wouldn't really be an indexed property... It would be better to generate a real CLR indexed property. What do you think ? Would you like to see this feature in C# ? If not, why ?

  Read the article

• UnicodeEncodeError when uploading files in Django admin

  - by Samuel Linde

  Note: I asked this question on StackOverflow, but I realize this might be a more proper place to ask this kind of question. I'm trying to upload a file called 'Testaråäö.txt' via the Django admin app. I'm running Django 1.3.1 with Gunicorn 0.13.4 and Nginx 0.7.6.7 on a Debian 6 server. Database is PostgreSQL 8.4.9. Other Unicode data is saved to the database with no problem, so I guess the problem must be with the filesystem somehow. I've set http { charset utf-8; } in my nginx.conf. LC_ALL and LANG is set to 'sv_SE.UTF-8'. Running 'locale' verifies this. I even tried setting LC_ALL and LANG in my nginx init script just to make sure locale is set properly. Here's the traceback: Traceback (most recent call last): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 307, in wrapper return self.admin_site.admin_view(view)(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/views/decorators/cache.py", line 79, in _wrapped_view_func response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/sites.py", line 197, in inner return view(request, *args, **kwargs) File "/srv/django/letebo/app/cms/admin.py", line 81, in change_view return super(PageAdmin, self).change_view(request, obj_id) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 28, in _wrapper return bound_func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 24, in bound_func return func(self, *args2, **kwargs2) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/transaction.py", line 217, in inner res = func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 985, in change_view self.save_formset(request, form, formset, change=True) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 677, in save_formset formset.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 482, in save return self.save_existing_objects(commit) + self.save_new_objects(commit) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 613, in save_new_objects self.new_objects.append(self.save_new(form, commit=commit)) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 717, in save_new obj.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 504, in save_base self.save_base(cls=parent, origin=org, using=using) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 543, in save_base for f in meta.local_fields if not isinstance(f, AutoField)] File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 255, in pre_save file.save(file.name, file, save=False) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 92, in save self.name = self.storage.save(name, content) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 48, in save name = self.get_available_name(name) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 74, in get_available_name while self.exists(name): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 218, in exists return os.path.exists(self.path(name)) File "/srv/.virtualenvs/letebo/lib/python2.6/genericpath.py", line 18, in exists st = os.stat(path) UnicodeEncodeError: 'ascii' codec can't encode characters in position 52-54: ordinal not in range(128) I tried running Gunicorn with debugging turned on, and the file uploads without any problem at all. I suppose this must mean that the issue is with Nginx. Still beats me where to look, though. Here are the raw response headers from Gunicorn and Nginx, if it makes any sense: Gunicorn: HTTP/1.1 302 FOUND Server: gunicorn/0.13.4 Date: Thu, 09 Feb 2012 14:50:27 GMT Connection: close Transfer-Encoding: chunked Expires: Thu, 09 Feb 2012 14:50:27 GMT Vary: Cookie Last-Modified: Thu, 09 Feb 2012 14:50:27 GMT Location: http://my-server.se:8000/admin/cms/page/15/ Cache-Control: max-age=0 Content-Type: text/html; charset=utf-8 Set-Cookie: messages="yada yada yada"; Path=/ Nginx: HTTP/1.1 500 INTERNAL SERVER ERROR Server: nginx/0.7.67 Date: Thu, 09 Feb 2012 14:50:57 GMT Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: close Vary: Cookie 500 UPDATE: Both locale.getpreferredencoding() and sys.getfilesystemencoding() outputs 'UTF-8'. locale.getdefaultlocale() outputs ('sv_SE', 'UTF8'). This seem correct to me, so I'm still not sure why I keep getting these errors.

  Read the article

• Scope quandary with namespaces, function templates, and static data

  - by Adrian McCarthy

  This scoping problem seems like the type of C++ quandary that Scott Meyers would have addressed in one of his Effective C++ books. I have a function, Analyze, that does some analysis on a range of data. The function is called from a few places with different types of iterators, so I have made it a template (and thus implemented it in a header file). The function depends on a static table of data, AnalysisTable, that I don't want to expose to the rest of the code. My first approach was to make the table a static const inside Analysis. namespace MyNamespace { template <typename InputIterator> int Analyze(InputIterator begin, InputIterator end) { static const int AnalysisTable[] = { /* data */ }; ... // implementation uses AnalysisTable return result; } } // namespace MyNamespace It appears that the compiler creates a copy of AnalysisTable for each instantiation of Analyze, which is wasteful of space (and, to a small degree, time). So I moved the table outside the function like this: namespace MyNamespace { const int AnalysisTable[] = { /* data */ }; template <typename InputIterator> int Analyze(InputIterator begin, InputIterator end) { ... // implementation uses AnalysisTable return result; } } // namespace MyNamespace There's only one copy of the table now, but it's exposed to the rest of the code. I'd rather keep this implementation detail hidden, so I introduced an unnamed namespace: namespace MyNamespace { namespace { // unnamed to hide AnalysisTable const int AnalysisTable[] = { /* data */ }; } // unnamed namespace template <typename InputIterator> int Analyze(InputIterator begin, InputIterator end) { ... // implementation uses AnalysisTable return result; } } // namespace MyNamespace But now I again have multiple copies of the table, because each compilation unit that includes this header file gets its own. If Analyze weren't a template, I could move all the implementation detail out of the header file. But it is a template, so I seem stuck. My next attempt was to put the table in the implementation file and to make an extern declaration within Analyze. // foo.h ------ namespace MyNamespace { template <typename InputIterator> int Analyze(InputIterator begin, InputIterator end) { extern const int AnalysisTable[]; ... // implementation uses AnalysisTable return result; } } // namespace MyNamespace // foo.cpp ------ #include "foo.h" namespace MyNamespace { const int AnalysisTable[] = { /* data */ }; } This looks like it should work, and--indeed--the compiler is satisfied. The linker, however, complains, "unresolved external symbol AnalysisTable." Drat! (Can someone explain what I'm missing here?) The only thing I could think of was to give the inner namespace a name, declare the table in the header, and provide the actual data in an implementation file: // foo.h ----- namespace MyNamespace { namespace PrivateStuff { extern const int AnalysisTable[]; } // unnamed namespace template <typename InputIterator> int Analyze(InputIterator begin, InputIterator end) { ... // implementation uses PrivateStuff::AnalysisTable return result; } } // namespace MyNamespace // foo.cpp ----- #include "foo.h" namespace MyNamespace { namespace PrivateStuff { const int AnalysisTable[] = { /* data */ }; } } Once again, I have exactly one instance of AnalysisTable (yay!), but other parts of the program can access it (boo!). The inner namespace makes it a little clearer that they shouldn't, but it's still possible. Is it possible to have one instance of the table and to move the table beyond the reach of everything but Analyze?

  Read the article

• NSMutableString leaks on append or replaceOccurrencesOfString

  - by John

  Hello Folks, I know similar questions have been asked time and time again but I ask that you please bear with me as I cannot seem to find an answer that helps. My application has leaks that are driving me out of my mind. Actually, they are not reported as leaks using Leaks, but my net bytes in ObjectAlloc goes up and up and up and never stops, eventually leading to a crash if it goes on long enough (not very long). The problem occurs with NSMutableStrings. I think there is either something fundamental I don't understand about them, or I am facing another problem that I am having difficulty tracking down but keeps hiding behind the NSMutableStrings. Specifically, I am noticing that whenever I append to or perform a replace on a NSMutableString, ObjectAlloc reports what appear to be mismatches in malloc/frees behind the scene when resizing the NSMutableString. I'm sorry to say this is the second time I'm facing this problem - the first time I messed around for hours and hours and finally the problem went away (magic!) but I don't really know why. When I look at the code below (and believe me, I've stared at it for hours) I cannot see the problem. I look at the code and think to myself that I should be fine because I'm releasing the only object for which I am responsible (aString) and that NSMutableString should be taking care of cleaning up after any resizing it does. In the second example, just so you know in case it helps, the string being passed in comes from an ASIHTTPRequest object (it's the responseString) and I don't do anything at all with it. It's being called simply like so ([self DoStuff2:[request responseString]]) and I don't free the request myself either (I'm using a ASINetworkQueue and I assume that the requests are destroyed for me (I tried and caused errors because the request was already being release somewhere else). Also, I know it shouldn't do anything, but I even tried wrapping the code in autorelease pools, which of course did nothing. I should mention that this code is being run inside of an NSOperation. I thought that perhaps I am experiencing problems because NSOperations should create an autorelease pool for themselves, but I've tried that to no avail. Not related to NSMutableString, but I find I also have similar problems using the NSString componentsSeparatedByString method. Sometimes the memory used by the array that gets the separated components is never released. Hmmm...strings in general seem to be somewhat problematic for me it seems. I would appreciate ANY help anyone can provide. If you require more info, I'll be glad to add it. I do promise you that I've struggled with this (and other problems) for weeks and every problem I encounter I research hard and long until I find a solution - this is not an idle request, but a true cry for help! I've written so much code and now I'm trying to seal some small leaks etc and I notice this problem. Honestly, I cannot believe how memory management in Objective C can stump me so at times...I've read Apple's memory mgmt docs many times and I thought I thoroughly understood it and I try to be diligent about releasing objects I own, but sometimes I find myself wondering if I truly understand...I would like to put this to bed once and make sure I understand all this fully - to have this sort of question/problem after writing thousands of lines of code is more than a little scary/embarrassing/annoying. So again, if anybody has any insight, I'd be grateful. Thanks for your time and efforts. -(void)DoStuff { NSString *aString [ [[NSString alloc] initWithFormat:@"text %@ more text", self.strVariable]; [self.someMutableStringVar replaceOccurrencesOfString:@"replace" withString:aString options:NSCaseInsensitiveSearch range:NSMakeRange(0, [self.someMutableStringVar length])]; [aString release]; } -(void)DoStuff2:(NSString *)aString { [self.someMutableStringVar appendString:aString]; }

  Read the article

• What is Causing this IIS 7 Web Service Sporadic Connectivity Error?

  - by dpalau

  On sporadic occasions we receive the following error when attempting to call an .asmx web service from a .Net client application: "The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host." By sporadic I mean that it might occur zero, once every few days, or a half-dozen times a day for some users. It will never occur for the first web service call of a user. And the subsequent (usually the same) call will always work immediately after the failure. The failures happen across a variety of methods in the service and usually happens between 15-20 seconds (according to the log) from the time of the request. Looking in the IIS site log for the particular call will show one or the other of the following windows error codes: 121: The semaphore timeout period has elapsed. 1236: The network connection was aborted by the local system. Some additional environment details: Running on internal network web farm consisting of two servers running IIS7 on Windows Server 2008 OS. These problems did not occur when running in an older IIS6 web farm of three servers running on Windows Server 2003 (and we use a single IIS6/2003 instance for our development and staging environments with no issues). EDIT: Also, all of these server instances are VMWare virtual machines, not sure if that is a surprise anymore or not. The web service is a .Net 2.0/3.5 compiled .asmx web service that has its own application pool (.Net 2.0, integrated pipeline). Only has Windows Authentication enabled. We have another web service on the farm that uses the same physical path as the primary service, the only difference being that Basic Authentication is enabled. This is used for a portion of our ERP system. Have tried using the same and different application pool - no effect on the error. This site isn't hit as often as the primary site and has never had an error. As mentioned, the error will only happen when called from the .Net client - not from other applications. The client application is always creating a new web service object for each request and setting the service credentials to System.Net.CredentialCache.DefaultCredentials. The application is either deployed locally to a client or run in a Citrix server session. Those users running in Citrix doesn't seem to experience the issue, only locally deployed clients. The Citrix servers and the web farm are located in the same physical location and are located in the same IP range (10.67.xx.xx). Locally deployed clients experiencing the error are located elsewhere (10.105.xx.xx, 10.31.xx.xx). I've checked the OS logs to see if I can see any problems but nothing really sticks out. EDIT: Actually, I myself just ran into the error a little bit ago. I decided to check out the logs again and saw that there was a Security log entry of "Audit Failure" at the 'same' time (IIS log entry at 1:39:59, event log entry at 1:39:50). Not sure if this is a coincidence or not, I'll have to check out the logs of previous errors. I'm probably grasping for straws but the details: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 7/8/2009 1:39:50 PM Event ID: 5159 Task Category: Filtering Platform Connection Level: Information Keywords: Audit Failure User: N/A Computer: is071019.<**.net Description: The Windows Filtering Platform has blocked a bind to a local port. Application Information: Process ID: 1260 Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Source Address: 0.0.0.0 Source Port: 54802 Protocol: 17 Filter Information: Filter Run-Time ID: 0 Layer Name: Resource Assignment Layer Run-Time ID: 36 I've also tried to use Failed Request Tracing in IIS7 but the service call never actually gets to where FRT can capture it (even though the failure is logged in the web service log). The network infrastructure group said they checked out the DNS and any NIC settings are correct so there is no 'flapping'. Everything pans out. I'm not sure that they checked out any domain controller servers though to see if that could be an issue. Any ideas? Or any other debugging strategies to get to the bottom of this? I'm just the developer in charge of the software and don't really have the knowledge on what to investigate from the networking side of things - although it does sound like a networking issue to me based on what is happening. Thanks in advance for any help.

  Read the article

• Server Memory with Magento

  - by Mohamed Elgharabawy

  I have a cloud server with the following specifications: 2vCPUs 4G RAM 160GB Disk Space Network 400Mb/s System Image: Ubuntu 12.04 LTS I am only running Magento CE 1.7.0.2 on this server. Nothing else. Usually, the server has a loading time of 4-5 seconds. Recently, this has dropped to over 30 seconds and sometimes the server just goes away and I get HTTP error reports to my email stating that HTTP requests took more than 20000ms. Running top command and sorting them returns the following: top - 15:29:07 up 3:40, 1 user, load average: 28.59, 25.95, 22.91 Tasks: 112 total, 30 running, 82 sleeping, 0 stopped, 0 zombie Cpu(s): 90.2%us, 9.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31901 www-data 20 0 360m 71m 5840 R 7 1.8 1:39.51 apache2 32084 www-data 20 0 362m 72m 5548 R 7 1.8 1:31.56 apache2 32089 www-data 20 0 348m 59m 5660 R 7 1.5 1:41.74 apache2 32295 www-data 20 0 343m 54m 5532 R 7 1.4 2:00.78 apache2 32303 www-data 20 0 354m 65m 5260 R 7 1.6 1:38.76 apache2 32304 www-data 20 0 346m 56m 5544 R 7 1.4 1:41.26 apache2 32305 www-data 20 0 348m 59m 5640 R 7 1.5 1:50.11 apache2 32291 www-data 20 0 358m 69m 5256 R 6 1.7 1:44.26 apache2 32517 www-data 20 0 345m 56m 5532 R 6 1.4 1:45.56 apache2 30473 www-data 20 0 355m 66m 5680 R 6 1.7 2:00.05 apache2 32093 www-data 20 0 352m 63m 5848 R 6 1.6 1:53.23 apache2 32302 www-data 20 0 345m 56m 5512 R 6 1.4 1:55.87 apache2 32433 www-data 20 0 346m 57m 5500 S 6 1.4 1:31.58 apache2 32638 www-data 20 0 354m 65m 5508 R 6 1.6 1:36.59 apache2 32230 www-data 20 0 347m 57m 5524 R 6 1.4 1:33.96 apache2 32231 www-data 20 0 355m 66m 5512 R 6 1.7 1:37.47 apache2 32233 www-data 20 0 354m 64m 6032 R 6 1.6 1:59.74 apache2 32300 www-data 20 0 355m 66m 5672 R 6 1.7 1:43.76 apache2 32510 www-data 20 0 347m 58m 5512 R 6 1.5 1:42.54 apache2 32521 www-data 20 0 348m 59m 5508 R 6 1.5 1:47.99 apache2 32639 www-data 20 0 344m 55m 5512 R 6 1.4 1:34.25 apache2 32083 www-data 20 0 345m 56m 5696 R 5 1.4 1:59.42 apache2 32085 www-data 20 0 347m 58m 5692 R 5 1.5 1:42.29 apache2 32293 www-data 20 0 353m 64m 5676 R 5 1.6 1:52.73 apache2 32301 www-data 20 0 348m 59m 5564 R 5 1.5 1:49.63 apache2 32528 www-data 20 0 351m 62m 5520 R 5 1.6 1:36.11 apache2 31523 mysql 20 0 3460m 576m 8288 S 5 14.4 2:06.91 mysqld 32002 www-data 20 0 345m 55m 5512 R 5 1.4 2:01.88 apache2 32080 www-data 20 0 357m 68m 5512 S 5 1.7 1:31.30 apache2 32163 www-data 20 0 347m 58m 5512 S 5 1.5 1:58.68 apache2 32509 www-data 20 0 345m 56m 5504 R 5 1.4 1:49.54 apache2 32306 www-data 20 0 358m 68m 5504 S 4 1.7 1:53.29 apache2 32165 www-data 20 0 344m 55m 5524 S 4 1.4 1:40.71 apache2 32640 www-data 20 0 345m 56m 5528 R 4 1.4 1:36.49 apache2 31888 www-data 20 0 359m 70m 5664 R 4 1.8 1:57.07 apache2 32511 www-data 20 0 357m 67m 5512 S 3 1.7 1:47.00 apache2 32054 www-data 20 0 357m 68m 5660 S 2 1.7 1:53.10 apache2 1 root 20 0 24452 2276 1232 S 0 0.1 0:01.58 init Moreover, running free -m returns the following: total used free shared buffers cached Mem: 4003 3919 83 0 118 901 -/+ buffers/cache: 2899 1103 Swap: 0 0 0 To investigate this further, I have installed apache buddy, it recommeneded that I need to reduce the maxclient connections. Which I did. I also installed MysqlTuner and it suggests that I need to set my innodb_buffer_pool_size to = 3.0G. However, I cannot do that, since the whole memory is 4G. Here is the output from apache buddy: ### GENERAL REPORT ### Settings considered for this report: Your server's physical RAM: 4003MB Apache's MaxClients directive: 40 Apache MPM Model: prefork Largest Apache process (by memory): 73.77MB [ OK ] Your MaxClients setting is within an acceptable range. Max potential memory usage: 2950.8 MB Percentage of RAM allocated to Apache 73.72 % And this is the output of MySQLTuner: -------- Performance Metrics ------------------------------------------------- [--] Up for: 47m 22s (675K q [237.552 qps], 12K conn, TX: 1B, RX: 300M) [--] Reads / Writes: 45% / 55% [--] Total buffers: 2.1G global + 2.7M per thread (151 max threads) [OK] Maximum possible memory usage: 2.5G (64% of installed RAM) [OK] Slow queries: 0% (0/675K) [OK] Highest usage of available connections: 26% (40/151) [OK] Key buffer size / total MyISAM indexes: 36.0M/18.7M [OK] Key buffer hit rate: 100.0% (245K cached / 105 reads) [OK] Query cache efficiency: 92.5% (500K cached / 541K selects) [!!] Query cache prunes per day: 302886 [OK] Sorts requiring temporary tables: 0% (1 temp sorts / 15K sorts) [!!] Joins performed without indexes: 12135 [OK] Temporary tables created on disk: 25% (8K on disk / 32K total) [OK] Thread cache hit rate: 90% (1K created / 12K connections) [!!] Table cache hit rate: 17% (400 open / 2K opened) [OK] Open file limit used: 12% (123/1K) [OK] Table locks acquired immediately: 100% (196K immediate / 196K locks) [!!] InnoDB buffer pool / data size: 2.0G/3.5G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: query_cache_size ( 64M) join_buffer_size ( 128.0K, or always use indexes with joins) table_cache ( 400) innodb_buffer_pool_size (= 3G) Last but not least, the server still has more than 60% of free disk space. Now, based on the above, I have few questions: Are these numbers normal? Do they make sense? Do I need to upgrade the server? If I don't need to upgrade and my configuration is not correct, how do I optimize it?

  Read the article

• Cisco ASA - Enable communication between same security level

  - by Conor

  I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• Running an allocation simulation repeatedly breaks after the first run.

  - by Az

  Background I have a bunch of students, their desired projects and the supervisors for the respective projects. I'm running a battery of simulations to see which projects the students end up with, which will allow me to get some useful statistics required for feedback. So, this is essentially a Monte-Carlo simulation where I'm randomising the list of students and then iterating through it, allocating projects until I hit the end of the list. Then the process is repeated again. Note that, within a single session, after each successful allocation of a project the following take place: + the project is set to allocated and cannot be given to another student + the supervisor has a fixed quota of students he can supervise. This is decremented by 1 + Once the quota hits 0, all the projects from that supervisor become blocked and this has the same effect as a project being allocated Code def resetData(): for student in students.itervalues(): student.allocated_project = None for supervisor in supervisors.itervalues(): supervisor.quota = 0 for project in projects.itervalues(): project.allocated = False project.blocked = False The role of resetData() is to "reset" certain bits of the data. For example, when a project is successfully allocated, project.allocated for that project is flipped to True. While that's useful for a single run, for the next run I need to be deallocated. Above I'm iterating through thee three dictionaries - one each for students, projects and supervisors - where the information is stored. The next bit is the "Monte-Carlo" simulation for the allocation algorithm. sesh_id = 1 for trial in range(50): for id in randomiseStudents(1): stud_id = id student = students[id] if not student.preferences: # Ignoring the students who've not entered any preferences for rank in ranks: temp_proj = random.choice(list(student.preferences[rank])) if not (temp_proj.allocated or temp_proj.blocked): alloc_proj = student.allocated_proj_ref = temp_proj.proj_id alloc_proj_rank = student.allocated_rank = rank successActions(temp_proj) temp_alloc = Allocated(sesh_id, stud_id, alloc_proj, alloc_proj_rank) print temp_alloc # Explained break sesh_id += 1 resetData() # Refer to def resetData() above All randomiseStudents(1) does is randomise the order of students. Allocated is a class defined as such: class Allocated(object): def __init__(self, sesh_id, stud_id, alloc_proj, alloc_proj_rank): self.sesh_id = sesh_id self.stud_id = stud_id self.alloc_proj = alloc_proj self.alloc_proj_rank = alloc_proj_rank def __repr__(self): return str(self) def __str__(self): return "%s - Student: %s (Project: %s - Rank: %s)" %(self.sesh_id, self.stud_id, self.alloc_proj, self.alloc_proj_rank) Output and problem Now if I run this I get an output such as this (truncated): 1 - Student: 7720 (Project: 1100241 - Rank: 1) 1 - Student: 7832 (Project: 1100339 - Rank: 1) 1 - Student: 7743 (Project: 1100359 - Rank: 1) 1 - Student: 7820 (Project: 1100261 - Rank: 2) 1 - Student: 7829 (Project: 1100270 - Rank: 1) . . . 1 - Student: 7822 (Project: 1100280 - Rank: 1) 1 - Student: 7792 (Project: 1100141 - Rank: 7) 2 - Student: 7739 (Project: 1100267 - Rank: 1) 3 - Student: 7806 (Project: 1100272 - Rank: 1) . . . 45 - Student: 7806 (Project: 1100272 - Rank: 1) 46 - Student: 7714 (Project: 1100317 - Rank: 1) 47 - Student: 7930 (Project: 1100343 - Rank: 1) 48 - Student: 7757 (Project: 1100358 - Rank: 1) 49 - Student: 7759 (Project: 1100269 - Rank: 1) 50 - Student: 7778 (Project: 1100301 - Rank: 1) Basically, it works perfectly for the first run, but on subsequent runs leading upto the nth run, in this case 50, only a single student-project allocation pair is returned. Thus, the main issue I'm having trouble with is figuring out what is causing this anomalous behaviour especially since the first run works smoothly. Thanks in advance, Az

  Read the article

• Slow queries in Rails- not sure if my indexes are being used.

  - by Max Williams

  I'm doing a quite complicated find with lots of includes, which rails is splitting into a sequence of discrete queries rather than do a single big join. The queries are really slow - my dataset isn't massive, with none of the tables having more than a few thousand records. I have indexed all of the fields which are examined in the queries but i'm worried that the indexes aren't helping for some reason: i installed a plugin called "query_reviewer" which looks at the queries used to build a page, and lists problems with them. This states that indexes AREN'T being used, and it features the results of calling 'explain' on the query, which lists various problems. Here's an example find call: Question.paginate(:all, {:page=>1, :include=>[:answers, :quizzes, :subject, {:taggings=>:tag}, {:gradings=>[:age_group, :difficulty]}], :conditions=>["((questions.subject_id = ?) or (questions.subject_id = ? and tags.name = ?))", "1", 19, "English"], :order=>"subjects.name, (gradings.difficulty_id is null), gradings.age_group_id, gradings.difficulty_id", :per_page=>30}) And here are the generated sql queries: SELECT DISTINCT `questions`.id FROM `questions` LEFT OUTER JOIN `taggings` ON `taggings`.taggable_id = `questions`.id AND `taggings`.taggable_type = 'Question' LEFT OUTER JOIN `tags` ON `tags`.id = `taggings`.tag_id LEFT OUTER JOIN `subjects` ON `subjects`.id = `questions`.subject_id LEFT OUTER JOIN `gradings` ON gradings.question_id = questions.id WHERE (((questions.subject_id = '1') or (questions.subject_id = 19 and tags.name = 'English'))) ORDER BY subjects.name, (gradings.difficulty_id is null), gradings.age_group_id, gradings.difficulty_id LIMIT 0, 30 SELECT `questions`.`id` AS t0_r0 <..etc...> FROM `questions` LEFT OUTER JOIN `answers` ON answers.question_id = questions.id LEFT OUTER JOIN `quiz_questions` ON (`questions`.`id` = `quiz_questions`.`question_id`) LEFT OUTER JOIN `quizzes` ON (`quizzes`.`id` = `quiz_questions`.`quiz_id`) LEFT OUTER JOIN `subjects` ON `subjects`.id = `questions`.subject_id LEFT OUTER JOIN `taggings` ON `taggings`.taggable_id = `questions`.id AND `taggings`.taggable_type = 'Question' LEFT OUTER JOIN `tags` ON `tags`.id = `taggings`.tag_id LEFT OUTER JOIN `gradings` ON gradings.question_id = questions.id LEFT OUTER JOIN `age_groups` ON `age_groups`.id = `gradings`.age_group_id LEFT OUTER JOIN `difficulties` ON `difficulties`.id = `gradings`.difficulty_id WHERE (((questions.subject_id = '1') or (questions.subject_id = 19 and tags.name = 'English'))) AND `questions`.id IN (602, 634, 666, 698, 730, 762, 613, 645, 677, 709, 741, 592, 624, 656, 688, 720, 752, 603, 635, 667, 699, 731, 763, 614, 646, 678, 710, 742, 593, 625) ORDER BY subjects.name, (gradings.difficulty_id is null), gradings.age_group_id, gradings.difficulty_id SELECT count(DISTINCT `questions`.id) AS count_all FROM `questions` LEFT OUTER JOIN `answers` ON answers.question_id = questions.id LEFT OUTER JOIN `quiz_questions` ON (`questions`.`id` = `quiz_questions`.`question_id`) LEFT OUTER JOIN `quizzes` ON (`quizzes`.`id` = `quiz_questions`.`quiz_id`) LEFT OUTER JOIN `subjects` ON `subjects`.id = `questions`.subject_id LEFT OUTER JOIN `taggings` ON `taggings`.taggable_id = `questions`.id AND `taggings`.taggable_type = 'Question' LEFT OUTER JOIN `tags` ON `tags`.id = `taggings`.tag_id LEFT OUTER JOIN `gradings` ON gradings.question_id = questions.id LEFT OUTER JOIN `age_groups` ON `age_groups`.id = `gradings`.age_group_id LEFT OUTER JOIN `difficulties` ON `difficulties`.id = `gradings`.difficulty_id WHERE (((questions.subject_id = '1') or (questions.subject_id = 19 and tags.name = 'English'))) Actually, looking at these all nicely formatted here, there's a crazy amount of joining going on here. This can't be optimal surely. Anyway, it looks like i have two questions. 1) I have an index on each of the ids and foreign key fields referred to here. The second of the above queries is the slowest, and calling explain on it (doing it directly in mysql) gives me the following: +----+-------------+----------------+--------+---------------------------------------------------------------------------------+-------------------------------------------------+---------+------------------------------------------------+------+----------------------------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+----------------+--------+---------------------------------------------------------------------------------+-------------------------------------------------+---------+------------------------------------------------+------+----------------------------------------------+ | 1 | SIMPLE | questions | range | PRIMARY,index_questions_on_subject_id | PRIMARY | 4 | NULL | 30 | Using where; Using temporary; Using filesort | | 1 | SIMPLE | answers | ref | index_answers_on_question_id | index_answers_on_question_id | 5 | millionaire_development.questions.id | 2 | | | 1 | SIMPLE | quiz_questions | ref | index_quiz_questions_on_question_id | index_quiz_questions_on_question_id | 5 | millionaire_development.questions.id | 1 | | | 1 | SIMPLE | quizzes | eq_ref | PRIMARY | PRIMARY | 4 | millionaire_development.quiz_questions.quiz_id | 1 | | | 1 | SIMPLE | subjects | eq_ref | PRIMARY | PRIMARY | 4 | millionaire_development.questions.subject_id | 1 | | | 1 | SIMPLE | taggings | ref | index_taggings_on_taggable_id_and_taggable_type,index_taggings_on_taggable_type | index_taggings_on_taggable_id_and_taggable_type | 263 | millionaire_development.questions.id,const | 1 | | | 1 | SIMPLE | tags | eq_ref | PRIMARY | PRIMARY | 4 | millionaire_development.taggings.tag_id | 1 | Using where | | 1 | SIMPLE | gradings | ref | index_gradings_on_question_id | index_gradings_on_question_id | 5 | millionaire_development.questions.id | 2 | | | 1 | SIMPLE | age_groups | eq_ref | PRIMARY | PRIMARY | 4 | millionaire_development.gradings.age_group_id | 1 | | | 1 | SIMPLE | difficulties | eq_ref | PRIMARY | PRIMARY | 4 | millionaire_development.gradings.difficulty_id | 1 | | +----+-------------+----------------+--------+---------------------------------------------------------------------------------+-------------------------------------------------+---------+------------------------------------------------+------+----------------------------------------------+ The query_reviewer plugin has this to say about it - it lists several problems: Table questions: Using temporary table, Long key length (263), Using filesort MySQL must do an extra pass to find out how to retrieve the rows in sorted order. To resolve the query, MySQL needs to create a temporary table to hold the result. The key used for the index was rather long, potentially affecting indices in memory 2) It looks like rails isn't splitting this find up in a very optimal way. Is it, do you think? Am i better off doing several find queries manually rather than one big combined one? Grateful for any advice, max

  Read the article

• What is "elegant" code?

  - by Breton

  I see a lot of lip service and talk about the most "elegant" way to do this or that. I think if you spend enough time programming you begin to obtain a sort of intuitive feel for what it is we call "elegance". But I'm curious. Even if we can look at a bit of code, and say instinctively "That's elegant", or "That's messy", I wonder if any of us really understands what that means. Is there a precise definition for this "elegance" we keep referring to? If there is, what is it? Now, what I mean by a precise definition, is a series of statements which can be used to derive questions about a peice of code, or a program as a whole, and determine objectively, or as objectively as possible, whether that code is "elegant" or not. May I assert, that perhaps no such definition exists, and it's all just personal preference. In this case, I ask you a slightly different question: Is there a better word for "elegance", or a better set of attributes to use for judging code quality that is perhaps more objective than merely appealing to individual intuition and taste? Perhaps code quality is a matter of taste, and the answer to both of my questions is "no". But I can't help but feel that we could be doing better than just expressing wishy washy feelings about our code quality. For example, user interface design is something that to a broad range of people looks for all the world like a field of study that oughtta be 100% subjective matter of taste. But this is shockingly and brutally not the case, and there are in fact many objective measures that can be applied to a user interface to determine its quality. A series of tests could be written to give a definitive and repeatable score to user interface quality. (See GOMS, for instance). Now, okay. is Elegance simply "code quality" or is it something more? Is it something that can be measured? Or is it a matter of taste? Does our profession have room for taste? Maybe I'm asking the wrong questions altogether. Help me out here. Bonus Round If there is such a thing as elegance in code, and that concept is useful, do you think that justifies classifying the field of programming as an "Art" capital A, or merely a "craft". Or is it just an engineering field populated by a bunch of wishful thinking humans? Consider this question in the light of your thoughts about the elegance question. Please note that there is a distinction between code which is considered "art" in itself, and code that was written merely in the service of creating an artful program. When I ask this question, I ask if the code itself justifies calling programming an art. Bounty Note I liked the answers to this question so much, I think I'd like to make a photographic essay book from it. Released as a free PDF, and published on some kind of on demand printing service of course, such as "zazz" or "tiggle" or "printley" or something . I'd like some more answers, please!

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >