Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 255/772 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

  • Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

    - by Kendall Gifford
    I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

    Read the article

  • Sporadic '.Xauthority not writable, changes will be ignored' going from OSX -> Linux

    - by Kamil Kisiel
    Every now and then when users SSH from their OS X (Snow Leopard) workstation to one of our Linux hosts they receive the message: /usr/bin/xauth: ~/.Xauthority not writable, changes will be ignored Of course, their X forwarded applications will not work at this point. However, if they log out and log right back in again they do not get the message and everything works as expected. On their Mac they get their home directory via AFP. The Linux machines get it via NFS. Any ideas on what could be going on here?

    Read the article

  • jQuery dialog open causes page to continuously lengthen in IE [closed]

    - by Michael
    I made my first dialog and AJAX work in jQuery and finally got everything working great - the dialog has a few buttons, cancel, save, and generate to get a new random string from the server. The problem is when I make the dialog modal (graying out the rest of the window), then in IE the scrollbars appear and sometimes keep moving as the page continuously extends down. This happens whenever the dialog is opened (it's not initially set to open) but not everytime. I can't think of any part of my code that would do this as I don't even have a JS loop anywhere. Googling for this didn't help. It seems like an IE vs jQuery quirk but any ideas?

    Read the article

  • Cloudstack virtual machines can't communicate with virtual routers when they are on different hosts

    - by Jorge Suárez de Lis
    I'm using Cloudstack 2.2.14 on a Ubuntu 10.04 set of hosts, and I have a problem on my setup. I have two hosts running. When a virtual router is created on host 1 and a virtual machine using that virtual router is created on host 2, or vice versa, I have no connectivity at all on the virtual machine. First of all, I have to setup the network manually on that virtual machine -usually DHCP is working, but not here-. Then, I can't ping to the virtual router from the virtual machine or vice versa. When both virtual router and virtual machine are created on the same host, everything works! Maybe those packages are being filtered somehow? I have no clue on how to proceed. Both hosts can communicate directly outside the virtualization.

    Read the article

  • Run Logstalgia on Remote Global Apache Log On a WHM System

    - by macinjosh
    I work for a small web development shop. We have a dedicated Linux server running WHM. For fun we want to run Logstalgia on a machine in our office. We'd really like it to display information about all the traffic on our server. Logstalgia use Apache's access logs to generate its visuals, the problem I have is that by default WHM does not have an access log for all sites combined. How can I safely configure our server to output a combined/global Apache access log in a place accessible by a non-root SSH user? I am also concerned that this file could get quite large so I think I'd also need to know how to have it automatically shed old information. To make things more interesting I'm a programmer not a sys admin so not everything is immediately obvious to me.

    Read the article

  • Is there a way to import email from the raw email files?

    - by Chris Schmitz
    I have a client who recently switched hosts. When they switched hosts they didn't backup their email and updated their configuration settings so they lost everything. However, I was able to log in to their old hosting control panel and download their mail folder. I am wondering if there is a way to extract their emails and/or contacts from the files. I'm not sure what type of files they are, there is no extension, but the folder directory is structured like this: mail/ .Drafts/ .Sent/ .Trash/ cur/ new/ theirdomain.com/ tmp/ [email protected] maildir Inside of the theirdomain.com folder, there is a folder for each account and inside of that is a folder called "cur" which has a whole bunch of files with names like 1292945327.H169813P25958.uscentral21.myserverhosts.com,S=10117/2,S and if I preview those files I can see the actual email messages inside of them but I have no idea how to get that information from those files to an email client. Anyone know of a way to work with these files? Thanks in advance for any insight you can share!

    Read the article

  • Mandatory Profiles on a Server 2003 TS Box

    - by Chloe
    I have a Windows Server 2003 box which will be acting as a terminal server. It will actually be running Citrix, but I don't believe that to be relevant here. There has been a request for every user to use a single mandatory profile. I've used mandatory profiles before, but there have been generally different profiles for different users so I've always used the "Terminal Services Profile" tab to good effect. What I'd like this time is a single setting, such as a Group Policy or similar that simply forces every non-domain admin user logging on to the box into using the mandatory profile. We'll be using Folder Redirection to take care of everything else. I'm aware of the following GPO: Computer Policy\Computer Configuration\Administrative Templates\Windows Components/Terminal Services Set path for TS Roaming Profiles But, as that's a computer policy, will it not apply to all users including administrators? If so, is it possible to exclude admins somehow?

    Read the article

  • What are the benefits of running chef-server instead of chef-solo?

    - by strife25
    I am looking at automated deployment solutions for my team and have been playing with Chef for the past few days. I've been able to get a simple web app up an running from a base Red Hat VM using chef-solo. Our end goal is to use Chef (or another system) to automatically deploy application topologies to the cloud as we run builds. Our process would basically run like so: Our web app code, dependencies, and chef cookbooks are stored in SCM A build is executed and greats a single package for images to acquire and test against The build engine then deploys new cloud images that run a chef client to get packages installed. The images acquire the cookbooks from SCM or the Chef server and install everything to get up and running What are the benefits and/or use cases for getting a Chef Server running? Are there any major benefits to have a Chef Server hold and acquire the cookbooks from SCM vs. using chef-solo and having a script that will pull the cookbooks from SCM?

    Read the article

  • Mac OS X & Linux: mount_nfs: can't access /nfs: Permission denied

    - by MountainX
    I have an Ubuntu 12.04 NFS server and I have an iMac NFS client running OS X 10.6.8. I believe I have everything set up properly, yet I still get this error on the Mac: mount_nfs: can't access /nfs: Permission denied My exports on the Linux server uses the insecure option like this: /export/home/me/ 192.168.100.132(rw,subtree_check,insecure,nohide) Where 192.168.100.132 is the address of my Mac. I have even tried using -o resvport on the Mac (in addition to insecure on Linux) and I still get the same error as above. $ sudo mount -t nfs -o resvport 192.168.100.1:/home/me /Users/me/mount Here is the output of showmount: # showmount -e 192.168.100.1 Export list for 192.168.100.1: /export/home/me 192.168.100.132 .... I have reviewed this similar question: How to mount NFS export on Mac OS X? And I have reviewed this frequently recommended tutorial: http://www.cyberciti.biz/faq/apple-mac-osx-nfs-mount-command-tutorial/ I still can't find a solution. Any ideas?

    Read the article

  • How can I stop sysprep from interacting with boot on windows 7

    - by Grofit
    I have recently had a laptop sent back to supplier for fixing a mainboard fault. I got it back today and every time it boots up I am faced with: "Setup is preparing windows for first time use" Then once it gets to the desktop I get the sysprep dialog come up asking if I want OOBC or Audit actions. I can close it, but it just keeps coming back, and I cannot find any startup or boot actions, even downloaded autoruns, and that cannot find anything to do with it. Ideally I do not want to format/fdisk as I have just spent hours installing everything on the laptop and I have my primary C:/ which has all windows and at worst case I can get rid of that, but I have a secondary partition D:/ which has alot of stuff I cant lose as its work related and important. Also to make matters more difficult I do not have a windows 7 disk, it was just pre-installed and they dont provide a disk. Any help would be great!

    Read the article

  • WSDL-world vs CLR-world – some differences

    - by nmarun
    A change in mindset is required when switching between a typical CLR application and a web service application. There are some things in a CLR environment that just don’t add-up in a WSDL arena (and vice-versa). I’m listing some of them here. When I say WSDL-world, I’m mostly talking with respect to a WCF Service and / or a Web Service. No (direct) Method Overloading: You definitely can have overloaded methods in a, say, Console application, but when it comes to a WCF / Web Services application, you need to adorn these overloaded methods with a special attribute so the service knows which specific method to invoke. When you’re working with WCF, use the Name property of the OperationContract attribute to provide unique names. 1: [OperationContract(Name = "AddInt")] 2: int Add(int arg1, int arg2); 3:  4: [OperationContract(Name = "AddDouble")] 5: double Add(double arg1, double arg2); By default, the proxy generates the code for this as: 1: [System.ServiceModel.OperationContractAttribute( 2: Action="http://tempuri.org/ILearnWcfService/AddInt", 3: ReplyAction="http://tempuri.org/ILearnWcfService/AddIntResponse")] 4: int AddInt(int arg1, int arg2); 5: 6: [System.ServiceModel.OperationContractAttribute( 7: Action="http://tempuri.org/ILearnWcfServiceExtend/AddDouble", 8: ReplyAction="http://tempuri.org/ILearnWcfServiceExtend/AddDoubleResponse")] 9: double AddDouble(double arg1, double arg2); With Web Services though the story is slightly different. Even after setting the MessageName property of the WebMethod attribute, the proxy does not change the name of the method, but only the underlying soap message changes. 1: [WebMethod] 2: public string HelloGalaxy() 3: { 4: return "Hello Milky Way!"; 5: } 6:  7: [WebMethod(MessageName = "HelloAnyGalaxy")] 8: public string HelloGalaxy(string galaxyName) 9: { 10: return string.Format("Hello {0}!", galaxyName); 11: } The one thing you need to remember is to set the WebServiceBinding accordingly. 1: [WebServiceBinding(ConformsTo = WsiProfiles.None)] The proxy is: 1: [System.Web.Services.Protocols.SoapDocumentMethodAttribute("http://tempuri.org/HelloGalaxy", 2: RequestNamespace="http://tempuri.org/", 3: ResponseNamespace="http://tempuri.org/", 4: Use=System.Web.Services.Description.SoapBindingUse.Literal, 5: ParameterStyle=System.Web.Services.Protocols.SoapParameterStyle.Wrapped)] 6: public string HelloGalaxy() 7:  8: [System.Web.Services.WebMethodAttribute(MessageName="HelloGalaxy1")] 9: [System.Web.Services.Protocols.SoapDocumentMethodAttribute("http://tempuri.org/HelloAnyGalaxy", 10: RequestElementName="HelloAnyGalaxy", 11: RequestNamespace="http://tempuri.org/", 12: ResponseElementName="HelloAnyGalaxyResponse", 13: ResponseNamespace="http://tempuri.org/", 14: Use=System.Web.Services.Description.SoapBindingUse.Literal, 15: ParameterStyle=System.Web.Services.Protocols.SoapParameterStyle.Wrapped)] 16: [return: System.Xml.Serialization.XmlElementAttribute("HelloAnyGalaxyResult")] 17: public string HelloGalaxy(string galaxyName) 18:  You see the calling method name is the same in the proxy, however the soap message that gets generated is different. Using interchangeable data types: See details on this here. Type visibility: In a CLR-based application, if you mark a field as private, well we all know, it’s ‘private’. Coming to a WSDL side of things, in a Web Service, private fields and web methods will not get generated in the proxy. In WCF however, all your operation contracts will be public as they get implemented from an interface. Even in case your ServiceContract interface is declared internal/private, you will see it as a public interface in the proxy. This is because type visibility is a CLR concept and has no bearing on WCF. Also if a private field has the [DataMember] attribute in a data contract, it will get emitted in the proxy class as a public property for the very same reason. 1: [DataContract] 2: public struct Person 3: { 4: [DataMember] 5: private int _x; 6:  7: [DataMember] 8: public int Id { get; set; } 9:  10: [DataMember] 11: public string FirstName { get; set; } 12:  13: [DataMember] 14: public string Header { get; set; } 15: } 16: } See the ‘_x’ field is a private member with the [DataMember] attribute, but the proxy class shows as below: 1: [System.Runtime.Serialization.DataMemberAttribute()] 2: public int _x { 3: get { 4: return this._xField; 5: } 6: set { 7: if ((this._xField.Equals(value) != true)) { 8: this._xField = value; 9: this.RaisePropertyChanged("_x"); 10: } 11: } 12: } Passing derived types to web methods / operation contracts: Once again, in a CLR application, I can have a derived class be passed as a parameter where a base class is expected. I have the following set up for my WCF service. 1: [DataContract] 2: public class Employee 3: { 4: [DataMember(Name = "Id")] 5: public int EmployeeId { get; set; } 6:  7: [DataMember(Name="FirstName")] 8: public string FName { get; set; } 9:  10: [DataMember] 11: public string Header { get; set; } 12: } 13:  14: [DataContract] 15: public class Manager : Employee 16: { 17: [DataMember] 18: private int _x; 19: } 20:  21: // service contract 22: [OperationContract] 23: Manager SaveManager(Employee employee); 24:  25: // in my calling code 26: Manager manager = new Manager {_x = 1, FirstName = "abc"}; 27: manager = LearnWcfServiceClient.SaveManager(manager); The above will throw an exception saying: In short, this is saying, that a Manager type was found where an Employee type was expected! Hierarchy flattening of interfaces in WCF: See details on this here. In CLR world, you’ll see the entire hierarchy as is. That’s another difference. Using ref parameters: * can use ref for parameters, but operation contract should not be one-way (gives an error when you do an update service reference)   => bad programming; create a return object that is composed of everything you need! This one kind of stumped me. Not sure why I tried this, but you can pass parameters prefixed with ref keyword* (* terms and conditions apply). The main issue is this, how would we know the changes that were made to a ‘ref’ input parameter are returned back from the service and updated to the local variable? Turns out both Web Services and WCF make this tracking happen by passing the input parameter in the response soap. This way when the deserializer does its magic, it maps all the elements of the response xml thereby updating our local variable. Here’s what I’m talking about. 1: [WebMethod(MessageName = "HelloAnyGalaxy")] 2: public string HelloGalaxy(ref string galaxyName) 3: { 4: string output = string.Format("Hello {0}", galaxyName); 5: if (galaxyName == "Andromeda") 6: { 7: galaxyName = string.Format("{0} (2.5 million light-years away)", galaxyName); 8: } 9: return output; 10: } This is how the request and response look like in soapUI. As I said above, the behavior is quite similar for WCF as well. But the catch comes when you have a one-way web methods / operation contracts. If you have an operation contract whose return type is void, is marked one-way and that has ref parameters then you’ll get an error message when you try to reference such a service. 1: [OperationContract(Name = "Sum", IsOneWay = true)] 2: void Sum(ref double arg1, ref double arg2); 3:  4: public void Sum(ref double arg1, ref double arg2) 5: { 6: arg1 += arg2; 7: } This is what I got when I did an update to my service reference: Makes sense, because a OneWay operation is… one-way – there’s no returning from this operation. You can also have a one-way web method: 1: [SoapDocumentMethod(OneWay = true)] 2: [WebMethod(MessageName = "HelloAnyGalaxy")] 3: public void HelloGalaxy(ref string galaxyName) This will throw an exception message similar to the one above when you try to update your web service reference. In the CLR space, there’s no such concept of a ‘one-way’ street! Yes, there’s void, but you very well can have ref parameters returned through such a method. Just a point here; although the ref/out concept sounds cool, it’s generally is a code-smell. The better approach is to always return an object that is composed of everything you need returned from a method. These are some of the differences that we need to bear when dealing with services that are different from our daily ‘CLR’ life.

    Read the article

  • is there software that can fill in forms on the Internet, automatically and if so, what kind of server would work best [closed]

    - by Stevew51
    Possible Duplicate: Firefox Form Fill Add On I have been looking to get into that fill in forms for cash type job/business. I have been searching for software that can do the job automatically. I guess some sort of copy and paste I have been told that there is software for everything. I need software that can fill in forms on the Internet automatically. And if so, what kind of server works best. Not what brand what kind of server.I am not sure if you understand what I am looking for. I am looking for software they can take information from a business site and automatically place it in a form on that same site.I am not asking, what brand I should buy, what kind of server is it.

    Read the article

  • Folder/File permission transfer between alike file structure

    - by Tyler Benson
    So my company has recently upgraded to a new SAN but the person who copied all the data over must have done a drag n' drop or basic copy to move everything. Apparently Xcopy is not something he cared to use. So now I am left with the task of duplicating all the permissions over. The structure has changed a bit ( as in more files/folders have been added) but for the most part has been stayed unchanged. I'm looking for suggestions to help automate this process. Can I use XCopy to transfer ONLY permissions to one tree from another? Would i just ignore any folders/permissions that don't line up correctly? Thanks a ton in advance, Tyler

    Read the article

  • Is Joel Test really a good gauging tool?

    - by henry
    I just learned about Joel Test. I have been computer programmer for 22 years, but somehow never heard about it before. I consider my best job so far to be this small investment managing company with 30 employees and only 3 people in IT department. I am no longer with them but I had being working there for 5 years – my longest streak with any given company. To my surprise they scored extremely poor on Joel Test. The only two questions I would answer “yes” are #4: Do you have a bug database? And #9: Do you use the best tools money can buy? Everything else is either “sometimes” or straight “no”. Here is what I liked about the company however: a) Good pay, they bragged about it to my face and I bragged about it to their face, so it was almost like a family environment. b) I always knew big picture. When writing a code to solve particular problem there were no ambiguity about the business nature of that problem. Even though we did not always had written specs we could ask business users a question anytime, often yelling it across the floor. I could even talk to executives any time I felt like doing it: no appointment necessary. c) Immediate feedback. Once we implement a solution and make business users happy they immediately let us know that, we (programmers) become heroes of the moment. d) No red tape. I could always buy any tools I deem necessary, and design solutions the way my professional judgment dictates. e) Flexibility. If I had mid-day dental appointment that is near my house rather than near the office, I would send email to the company: "FYI: I work from home today". As long as one of 3 IT guys was on the floor (to help traders in case their monitors go dark) they did not care where 2 others are. So the question thus becomes how valuable Joel Test is? Why bother with it?

    Read the article

  • Integrating different branches from external sources into a single Mercurial repository

    - by dukeofgaming
    I'm currently working in a company using Perforce and am making way for distributed version control with Mercurial. I've had success importing Perforce history using the perfarce (quite a suitable name, I laugh every time I see/say it) however, this only works with a single branch at a time. Here's how my P4 integration setup works: In perforce, create a "client", which is kind of a description of what you will be constantly updating/checking-out. This can only address one branch at a time (trunk or other). Once you do this, run hg clone p4://<server>/<client_name> Go to .hg/hgrc and put the perforce path line: perforce = p4://<server>/<client_name> Work normally with the code under mercurial, do hg pull perforce to sync up, hg push to export a changelist What I'd like to be able to do is have a perforce path per branch and have everything work in the same repository. Now, pushing is not a problem, however, if I pull the history from another branch it would end up at the default branch. I'd like to be able to do something like hg pull perforce-R5 and have it land in mercurial's R5 branch. Even if I have no merging history, it would be sweet enough to be able to preserve it. There are also other plugins for CVCSs that let you integrate mercurial, but AFAIK the subversion one has the same problem. I don't think there is a straight-through way of doing this, but as long as I could automate the process with some hooks and scripts in a single Mercurial machine, that would be good enough.

    Read the article

  • Linux clients and Windows Servers can connect but not windows clients

    - by Mustafa Ismail Mustafa
    This is driving me insane because I can't make head or tails of it. We have two DCs (W2K3 SP1) and I'v tried this once on each machine as a sanity check. DHCP is being served by either one of the machines and all machines get an address no problem. The servers can connect/ping/browse to the www and so can all our linux clients. But NONE of our windows clients (all windows 7). I can do anything within the network, I can even ping the firewall/router but nothing from the windows clients is leaving the confines of our subnet. I don't get it. The linux and windows clients are both served from the same DHCP server, the gateway is the same, everything is the same. Anyone care to take a shot at how to resolve this? I tried adding explicit routes at the clients, but still no go. TIA SMIM

    Read the article

  • Can't access VirtualBox host-only network from windows host

    - by Markus Orreilly
    I've got two vms running on a windows host, each with a host-only network and ips in the 192.168.56.XXX range. One of them is running apache and serving some content that I want to access from my windows host. However, the windows host can't access the apache server at all. The server is running on 192.168.56.103. ipconfig from windows says it's ip for the Virtual Box interface is 169.254.143.37. I tried route add to route 192.168.56.XX traffic, but everything I tried didn't work and I was probably using it wrong. Any ideas on how to make this work?

    Read the article

  • Teamcity nuget feed http authentication

    - by Mihalis Bagos
    Nuget feed by team city is working perfectly but there is a strange problem. Local IP (http://192.168.xx.xx:9999/feed/../): Listing through browser works Accessing packages through Visual studio 11 nuget works VPN IP (http://55.xx.xx.xx:9999/feed/../): Listing packages through browser works Accessing packages through Visual studio 11 nuget PROBLEM GUEST Account: Everything works fine, both on VPN and local IP (so its purely an authentication problem) The problem is, we can't get the user to authenticate. Using the same credentials, no matter what we try we get 401. The server VPN ip is whitelisted in internet explorer intranet settings. Any ideas? Basically HTTP authentication is failing for the VPN although it shouldn't, since the browser works fine!

    Read the article

  • Cannot FTP without simultaneous SSH connection?

    - by Lucas
    I'm trying to set up an old box as a backup server (running 10.04.4 LTS). I intend to use 3rd party software on my PC to periodically connect to my server via FTP(S) and to mirror certain files. For some reason, all FTP connection attempts fail UNLESS I'm simultaneously connected via SSH. For example, if I use putty to test the connection to port 21, the system hangs and times out. I get: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] <cursor> However, when I'm simultaneously logged in (in another session) everything works: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] 230 Login successful. Basically, this means that my software will never be able to connect on its own, as intended. I know that the correct port is open because it works (sometimes) and nmap gives me: Starting Nmap 5.00 ( http://nmap.org ) at 2012-03-20 16:15 CDT Interesting ports on xx.xxx.xx.x: Not shown: 995 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 53/tcp open domain 139/tcp open netbios-ssn 445/tcp open microsoft-ds Nmap done: 1 IP address (1 host up) scanned in 0.15 seconds My only hypothesis is that this has something to do with iptables. Maybe it's allowing only established connections? I don't think that's how I set it up, but maybe? Here's my iptables rules for INPUT: lucas@rearden:~$ sudo iptables -L INPUT Chain INPUT (policy DROP) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ufw-before-logging-input all -- anywhere anywhere ufw-before-input all -- anywhere anywhere ufw-after-input all -- anywhere anywhere ufw-after-logging-input all -- anywhere anywhere ufw-reject-input all -- anywhere anywhere ufw-track-input all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:ftp I'm using vsftpd. Any thoughts/resources on how I could fix this? L

    Read the article

  • SSH keys fail for one user

    - by Eli
    I just set up a new Debian server. I disabled root SSH and password auth, so you've gotta use a key file. For my primary user, everything works exactly as expected. I used ssh-keygen -t dsa and got myself a public and private key. Put one in authorized keys, put the other in a pem file locally. I wanted to create a user that I can deploy things with, so I did basically the same process. I addusered it, made a .ssh folder, ran ssh-keygen -t dsa (I also tried RSA), put the keys in their appropriate locations. No luck. I'm getting a Permission denied (publickey) error. When I use the exact same keys as the account that works, same error. When I enable password authentication, I can log in via SSH with the password. How do I debug this?

    Read the article

  • Going Paperless

    - by Jesse
    One year ago I came to work for a company where the entire development team is 100% “remote”; we’re spread over 3 time zones and each of us works from home. This seems to be an increasingly popular way for people to work and there are many articles and blog posts out there enumerating the advantages and disadvantages of working this way. I had read a lot about telecommuting before accepting this job and felt as if I had a pretty decent idea of what I was getting into, but I’ve encountered a few things over the past year that I did not expect. Among the most surprising by-products of working from home for me has been a dramatic reduction in the amount of paper that I use on a weekly basis. Hoarding In The Workplace Prior to my current telecommute job I worked in what most would consider pretty traditional office environments. I sat in cubicles furnished with an enormous plastic(ish) modular desks, had a mediocre (at best) PC workstation, and had ready access to a seemingly endless supply of legal pads, pens, staplers and paper clips. The ready access to paper, countless conference room meetings, and abundance of available surface area on my desk and in drawers created a perfect storm for wasting paper. I brought a pad of paper with me to every meeting I ever attended, scrawled some brief notes, and then tore that sheet off to keep next to my keyboard to follow up on any needed action items. Once my immediate need for the notes was fulfilled, that sheet would get shuffled off into a corner of my desk or filed away in a drawer “just in case”. I would guess that for all of the notes that I ever filed away, I might have actually had to dig up and refer to 2% of them (and that’s probably being very generous). That said, on those rare occasions that I did have to dig something up from old notes, it was usually pretty important and I ended up being very glad that I saved them. It was only when I would leave a job or move desks that I would finally gather all those notes together and take them to shredding bin to be disposed of. When I left my last job the amount of paper I had accumulated over my three years there was absurd, and I knew coworkers who had substance-abuse caliber paper wasting addictions that made my bad habit look like nail-biting in comparison. A Product Of My Environment I always hated using all of this paper, but simply couldn’t bring myself to stop. It would look bad if I showed up to an important conference room meeting without a pad of paper. What if someone said something profound! Plus, everyone else always brought paper with them. If you saw someone walking down the hallway with a pad of paper in hand you knew they must be on their way to a conference room meeting. Some people even had fancy looking portfolio notebook sheaths that gave their legal pads all the prestige of a briefcase. No one ever worried about running out of fresh paper because there was an endless supply, and there certainly was no shortage of places to store and file used paper. In short, the traditional office was setup for using tons and tons of paper; it’s baked into the culture there. For that reason, it didn’t take long for me to kick the paper habit once I started working from home. In my home office, desk and drawer space are at a premium. I don’t have the budget (or the tolerance) for huge modular office furniture in my spare bedroom. I also no longer have access to a bottomless pit of office supplies stock piled in cabinets and closets. If I want to use some paper, I have to go out and buy it. Finally (and most importantly), all of the meetings that I have to attend these days are “virtual”. We use instant messaging, VOIP, video conferencing, and e-mail to communicate with each other. All I need to take notes during a meeting is my computer, which I happen to be sitting right in front of all day. I don’t have any hard numbers for this, but my gut feeling is that I actually take a lot more notes now than I ever did when I worked in an office. The big difference is I don’t have to use any paper to do so. This makes it far easier to keep important information safe and organized. The Right Tool For The Job When I first started working from home I tried to find a single application that would fill the gap left by the pen and paper that I always had at my desk when I worked in an office. Well, there are no silver bullets and I’ve evolved my approach over time to try and find the best tool for the job at hand. Here’s a quick summary of how I take notes and keep everything organized. Notepad++ – This is the first application I turn to when I feel like there’s some bit of information that I need to write down and save. I use Launchy, so opening Notepad++ and creating a new file only takes a few keystrokes. If I find that the information I’m trying to get down requires a more sophisticated application I escalate as needed. The Desktop – By default, I save every file or other bit of information to the desktop. Anyone who has ever had to fix their parents computer before knows that this is a dangerous game (any file my mother has ever worked on is saved directly to the desktop and rarely moves anywhere else). I agree that storing things on the desktop isn’t a great long term approach to keeping organized, which is why I treat my desktop a bit like my e-mail inbox. I strive to keep both empty (or as close to empty as I possibly can). If something is on my desktop, it means that it’s something relevant to a task or project that I’m currently working on. About once a week I take things that I’m not longer working on and put them into my ‘Notes’ folder. The ‘Notes’ Folder – As I work on a task, I tend to accumulate multiple files associated with that task. For example, I might have a bit of SQL that I’m working on to gather data for a new report, a quick C# method that I came up with but am not yet ready to commit to source control, a bulleted list of to-do items in a .txt file, etc. If the desktop starts to get too cluttered, I create a new sub-folder in my ‘Notes’ folder. Each sub-folder’s name is the current date followed by a brief description of the task or project. Then all files related to that task or project go into that sub folder. By using the date as the first part of the folder name, these folders are automatically sorted in reverse chronological order. This means that things I worked on recently will generally be near the top of the list. Using the built-in Windows search functionality I now have a pretty quick and easy way to try and find something that I worked on a week ago or six months ago. Dropbox – Dropbox is a free service that lets you store up to 2GB of files “in the cloud” and have those files synced to all of the different computers that you use. My ‘Notes’ folder lives in Dropbox, meaning that it’s contents are constantly backed up and are always available to me regardless of which computer I’m using. They also have a pretty decent iPhone application that lets you browse and view all of the files that you have stored there. The free 2GB edition is probably enough for just storing notes, but I also pay $99/year for the 50GB storage upgrade and keep all of my music, e-books, pictures, and documents in Dropbox. It’s a fantastic service and I highly recommend it. Evernote – I use Evernote mostly to organize information that I access on a fairly regular basis. For example, my Evernote account has a running grocery shopping list, recipes that my wife and I use a lot, and contact information for people I contact infrequently enough that I don’t want to keep them in my phone. I know some people that keep nearly everything in Evernote, but there’s something about it that I find a bit clunky, so I tend to use it sparingly. Google Tasks – One of my biggest paper wasting habits was keeping a running task-list next to my computer at work. Every morning I would sit down, look at my task list, cross off what was done and add new tasks that I thought of during my morning commute. This usually resulted in having to re-copy the task list onto a fresh sheet of paper when I was done. I still keep a running task list at my desk, but I’ve started using Google Tasks instead. This is a dead-simple web-based application for quickly adding, deleting, and organizing tasks in a simple checklist style. You can quickly move tasks up and down on the list (which I use for prioritizing), and even create sub-tasks for breaking down larger tasks into smaller pieces. Balsamiq Mockups – This is a simple and lightweight tool for creating drawings of user interfaces. It’s great for sketching out a new feature, brainstorm the layout of a interface, or even draw up a quick sequence diagram. I’m terrible at drawing, so Balsamiq Mockups not only lets me create sketches that other people can actually understand, but it’s also handy because you can upload a sketch to a common location for other team members to access. I can honestly say that using these tools (and having limited resources at home) have lead me to cut my paper usage down to virtually none. If I ever were to return to a traditional office workplace (hopefully never!) I’d try to employ as many of these applications and techniques as I could to keep paper usage low. I feel far less cluttered and far better organized now.

    Read the article

  • Help, broken Gsettings

    - by Rene
    I was trying to disable the global menu as per http://ubuntuhandbook.org/index.php/2013/07/disable-global-menu-on-ubuntu-13-10-saucy/#comment-8612, but while it didn't change anything, after running the autoremove command unity-tweak-tool broke. Obviously my first reaction was to re-install the removed package but it remains broken. TBH I don't know if it is even related or just a coincidence. When I start it from the launcher it just blinks and disappear. When I start it from terminal I get this error: $ gnome-tweak-tool WARNING : Shell not installed or running WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 199, in __init__ raise Exception("Shell not running or DBus service not available") Exception: Shell not running or DBus service not available INFO : GSettings missing key org.gnome.nautilus.desktop (key computer-icon-visible) WARNING : Shell not running None INFO : GSettings missing key org.gnome.mutter (key workspaces-only-on-primary) Segmentation fault (core dumped) I had a look with dconf-editor if I could just add the missing key, but apparently keys aren't meant to be added "by hand". So how can I fix this? I'd rather prefer not having to reinstall everything. Which package is broken, can I just reinstall that? EDIT: I found by being root gnome-tweak-tool no longer crashed so possibly a permission issue somewhere. I don't know that I changed any permissions. Another related problem, actually the reason I noticed the problem at all, is that unity-tweak-tool seem no longer to want to save the values edited. I normally just have the Unity launcher on the primary display but wanted to check what it was like having it on both. I didn't like it so I went into unity-tweak-tool to set it back - but regardless how many time I tick "only primary display" it never changes anything. What does the Unity-tweak-tool actually change and can I do this directly somehow?

    Read the article

  • Interactive Reporting with BI Publisher 11G

    - by kanichiro.nishida
    One of the new features that came out with BI Publisher 11G and made me really excited about is the Interactive Viewer, which allows you to interact with the data presented in the reports and gain more insights about the data. You can have as many Table, Chart, Pivot Table, Gauge components in a single report and all of them are linked together so that you can click on any data point on the components such as Chart, Pivot Table, Gauge, and that would refresh other components in the report to reflect the selection without refreshing the whole report or page. No longer you need to navigate to another report or open other reports to see related data or drill down to the detail data. It’s all there within a single report. Well, sounds cliché but really this is a typical case of ‘seeing is believing’, so instead of reading I would love you guys to take a look so I’ve recorded the following video. Please take a look !   The above video shows you the power of the BI Publisher Interactive Viewer with a real data from San Francisco Airport. The lists shown at the top or the left are one of the new features that we’ll be introducing in coming future very soon, but everything else is there with 11.1.1.3. So why not start today ? And please share your feedback with us!

    Read the article

  • SQL SERVER – Get Free Books on While Learning SQL Server 2012 Error Handling

    - by pinaldave
    Fans of this blog are aware that I have recently released my new books SQL Server Functions and SQL Server 2012 Queries. The books are available in market in limited edition but you can avail them for free on Wednesday Nov 14, 2012. Not only they are free but you can additionally learn SQL Server 2012 Error Handling as well. My book’s co-author Rick Morelan is presenting a webinar tomorrow on SQL Server 2012 Error Handling. Here is the brief abstract of the webinar: People are often shocked when they see the demo in this talk where the first statement fails and all other statements still commit. For example, did you know that BEGIN TRAN…COMMIT TRAN is not enough to make everything work together? These mistakes can still happen to you in SQL Server 2012 if you are not aware of the options. Rick Morelan, creator of Joes2Pros, will teach you how to predict the Error Action and control it with & without structured error handling. Register for the webinar now to learn: How to predict the Error Action and control it Nuances between successful and failing SQL statements Essential SQL Server 2012 configuration options Register for the Webinar and be present during the webinar. My co-author will announce a winner (may be more than 1 winner) during the session. If you are present during the session – you are eligible to win the book. The webinar is scheduled for 2 different times to accommodate various time zones. 1) 10am ET/7am PT 2) 1pm ET/11am PT. Each webinar will have their own winner. You can increase your chances by attending both the webinars. Do not miss this opportunity and register for the webinar right now. The recordings of the webinar may not be available. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

    Read the article

  • [MINI HOW-TO] Update Your Zune Player Software

    - by Mysticgeek
    Keeping your computer and software up to date is very important in keeping everything running smooth and secure. It’s also important to keep your geeky gadgets updated as well. Here we take a look at updating a Zune HD. Note: In this example we’re updating a Zune HD out of the box which hasn’t been updated yet. The first thing you’ll need to do if you haven’t already is download and install the latest Zune software (link below). Now plug your Zune into your computer with the included USB connection cable and give it a moment to be recognized. Next launch the Zune Desktop software and you should get the following screen. Just accept the EULA… Then the update kicks off. Make sure not to disconnect the Zune while the update takes place. The update will take a few minutes, and after it’s complete you should be good to go and can start using your Zune. To update your player in the future, go to General Settings then Player Update. Just like your computer’s hardware and software, you want to keep your other geeky gadgets updated as well. This will help the device run more smoothly, and sometimes add additional functionality. Download Zune 4.0 Similar Articles Productive Geek Tips Switch Ubuntu Server to use Internet Repositories Instead of cdromGreat Sounding Music and Skin Possibilities with XionExaile 0.3.0 is a Music Player for UbuntuMake VLC Player Look like Windows Media Player 11Unofficial Windows XP Themes Created by Microsoft TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox)

    Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >