Search Results

Search found 9744 results on 390 pages for 'k means'.

Page 255/390 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

  • Adding Netem Filter Rules

    - by fontsix
    iam new in programming and using linux. My Question is, is it possible to add Netem Filter Rules later ? I want to create an PHP-Interface for Netem and I don't know how much filters were required. This should be some kind of dynamically. In Example : A user with a static IP starts an Netem Command (Latency) with PHP Interface this means these five command werde executed by php in the first step $classid = 11; $handle = 10; "sudo tc qdisc add dev eth0 handle 1: root htb"; "sudo tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbps"; "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; Now, if there would be a second user who wants to use Netem independent of the first user, i only want to execute the last 3 commands, like "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; There is an Algorithmus for increasing variables $classid and $handle. This should work. Now my Question: Is it possible only to add these 3 commands to add a new class with new qdisc and a new filter rule ? Or how can i realize it ? The Apache Error_log tells me "sh: line 1: flowid: command not found" but i can't find any mistake. I hope you could help Best regards fontsix

    Read the article

  • Triple monitor setting in Linux with USB-HDMI adapter

    - by Oscar Carballal
    I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Solaris 10 invalid ARP requests from 0.0.0.0? Link up/down every hour or 2

    - by JWD
    The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). [mymacaddress]/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) It's being logged every hour. I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. There are some tunable SCTP parameters but it's not something I'm familiar with. Do I have to add changes to /etc/system? Looks like sctp_heartbeat_interval might be what I need to change? If it makes any difference, I have a few solaris zones running on this server, each with their own IP address on a virtual interface. eth0:0, eth0:1, etc. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else? Update: This was happening more frequently but now it seems to be happening roughly every hour or every two hours. It's not consistent. I tried setting setting the link speed and duplex to match the switch port and that seemed to make it stop happening for a few hours but then it started again.

    Read the article

  • wget recursively download from pages with lots of links

    - by Shadow
    When using wget with the recursive option turned on I am getting an error message when it is trying to download a file. It thinks the link is a downloadable file when in reality it should just be following it to get to the page that actually contains the files(or more links to follow) that I want. wget -r -l 16 --accept=jpg website.com The error message is: .... since it should be rejected. This usually occurs when the website link it is trying to fetch ends with a sql statement. The problem however doesn't occur when using the very same wget command on that link. I want to know how exactly it is trying to fetch the pages. I guess I could always take a poke around the source although I don't know how messy the project is. I might also be missing exactly what "recursive" means in the context of wget. I thought it would run through and travel in each link getting the files with the extension I have requested. I posted this up over at stackOverFlow but they turned me over here:) Hoping you guys can help.

    Read the article

  • apache: can't renew ssl certificate

    - by Caballero
    I have Godaddy SSL certificate for one website on my dedicated server running Centos 5.3 / Apache 2.2.3. I have renewed certificate on Godaddy recently, however now it's showing as expired on my website. I've re-keyed certificate since and reuploaded domain.key, domain.crt and bundle.crt (example file names) files to the server, restarted apache, but the sertificate still shows as expired. I'm running out of clues. I've tried replacing content of .crt files with jiberish and restart apache - it's still showing that certificate is expired, even though it shouldn't be picked up at all. I eventually rebooted dedicated server, still no luck. I'm using free SSL check tool http://www.digicert.com/help/ which clearly shows all the green checks except one - certificate is expired. Has someone any idea what might be causing this? Could there be some kind of caching going on here? UPDATE: after running openssl x509 -in domain.crt -noout -enddate I'm getting this output: notAfter=Jun 2 08:16:51 2013 GMT So I asume this means I have the right certificate on the server and yet the old expired one shows on the web...

    Read the article

  • Is it possible to add/register an MIB for the Windows built-in SNMP service?

    - by michielvoo
    I need to build monitoring into an existing .NET application. I will use SNMP to send the application's status to the Windows SNMP service. I have used a .NET library to create the SNMP SET request according to the MIB that I have been provided with, and with the correct community. My code now sends multiple 'variables' in a SET request, for example: Id: ".1.3.6.1.4.1.43607.1.1.1.1.1" (ObjectIdentifier) Data: 42 (Integer32) On my machine I have enabled the SNMP service, configured a community with READ/WRITE permissions, and added localhost to the list of hosts to accept requests from. When I send the SET request I get a response, but it has error status 17 which, according to MSDN means SNMP_ERRORSTATUS_NOTWRITABLE. The response also has error index set to 8, which is the number of variables I send. If I send 7 variables, the error index is set to 7. I think the problem is that the Windows SNMP service is preconfigured to only accept SET requests for a fixed set of MIBs. How can I get the Windows SNMP service to 'accept' my custom MIB SET request? Edit: I downloaded and installed the Windows Server 2003 Resource Kit and tried to 'compile' the MIB file with mibcc.exe ("SNMP MIB Compiler") but I have not been able to compile any MIB files (even the most basic ones like SNMPv2-SMI.mib).

    Read the article

  • Winamp playing sound but no video

    - by Greg Sansom
    I am having problems playing video in Winamp (the movie I am trying to play is an AVI - not sure if other formats work). I have installed the K-Lite Codec Pack, and the video does work in Winamp Classic. I can also play the video in Winamp on another machine (although I can't remember the exact configuration details of that machine - and I don't think they're relevant). There are a few symptoms: The content of the Video view is either empty, transparent, or displays rendering from other programs. Opening the Visualization view shows the following error: MILKDROP ERROR DirectX initialization failed (GetDeviceCaps). This means that no valid 3D-accelerated display adapter could be found on your computer. If you know this is not the case, it is possible that your graphics subsystem is unstable; please try rebooting your computer and then try to run the plugin again. Otherwise, please install a 3D-accelerated display adapter. Trying to open streams via the SHOUTCast TV plugin shows Error opening video output, and the video does not open. Opening the file with WMC causes the following error (although the movie still plays): Error creating DX9 allocation presenter CreateDevice failed D3DERR_NOTAVAILABLE There are no warnings displayed in Device Manager, although the display adapter is the standard Windows one. Running DxDiag shows no problems (codec for Video listed as XviD 1.1.2 Final). GSpot reports that codecs are installed. System specs: - Windows Server 2008 r2 Standard 64-bit, with latest updates; - .NET 3.5.1 installed; - Winamp v5.6.01 (latest version); - DirectX 11 (Latest version); - K-Lite Codec Pack 7.0.0 (Full); - Machine is HP DC7600 - full specs here. Please comment if there is any more information which will help to diagnose the problem.

    Read the article

  • How to turn off Excel "Header Row" without losing data in it?

    - by Ken
    I've been sent an Excel spreadsheet with a weird first row. Some of the cells say "Column1", "Column2", etc., but I can't delete their contents. If I select the cell and hit backspace, it goes blank, but when I press return, it goes right back to saying "Column1". I found another answer here that suggested this could be caused by "Cell validation", but the validation window says "Any value", and also "show alert" (and I'm not seeing an alert), so I don't think that's it. The first row is white text on a blue background, if that means anything. The spreadsheet was sent to me in XLSX format, but I tried resaving as XLS and opening that, and it seems to make no difference. This is with the "ribbon" version of Excel (they got rid of the Help menu so I don't know how to see what version number it is!). Thanks! Update: The Excel online help says to use ribbon Home tab - Cells - Delete - ... to delete cells. When I select anything on the first row, this pop-up menu is dimmed. So maybe Excel doesn't think row 1 consists of "cells"? Though I don't know what else it would call them. Update 2: I found it, kind of. If I click the "Design" tab in the ribbon, then uncheck "Header Row", then first row becomes a normal row of cells again. Unfortunately, the contents disappear entirely. I want to delete a few cells, not all 50+! And if I copy the first row before turning off "Header Row", it disappears from the clipboard when I uncheck that. So I kind of know what mode it's stuck in, but not a good way out of it.

    Read the article

  • Firefox cannot render icons from Font Awesome webfont set

    - by ADTC
    In Firefox (Windows 7), icons and glyphs that are called from the Font Awesome package do not render properly. An example of this can be seen on the Khan Academy website. Below the video the icons are shown as boxes with hex codes in them. This means that it isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I found this question on Stack Overflow that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However, I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. I've already tried manually downloading the font and adding it to Windows' Fonts folder but this does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

    Read the article

  • Cloning a NAS drive which hosts a SQL Server DB

    - by Adrian Hand
    We have a system in the field running a server application which is suffering with major performance issues. The system in question has 2 onboard 300gb sas drives in RAID 5 from which it boots Windows Server 2003, and a 6tb buffalo terastation NAS unit (also RAID 5) to which the server app does all of its reading and writing. I believe the terastation is the source of all our woes. Whilst under load, reads and writes tick by at something of the order of 1meg/sec, though the network in question is hardly utilised. The terastation contains various data, but crucially hosts a full instance worth of SQL Server .mdf and .ldf files (master etc - the whole shooting match) I wish to stop all the services on the server, then take everything on the terastation and essentially clone it to some alternative onboard storage, so as to eliminate the terastation from the equation as far as poor performance is concerned. ie the terastation is currently drive D: - I want to copy everything off and then have the duplicate assume the drive letter so that as far as the software is aware, nothing is different. This is tricky because of the mdf and ldf files - everything else will work with a straight up file copy. Can anyone suggest a means to achieve what I am describing? Many thanks!

    Read the article

  • How to configure CISCO switch 2960 for port-based address allocation on a single port only?

    - by Jack
    CISCO 2960 allows you to configure so-called Port-Based address allocation. It makes the switch to associate IP address it is giving out via DHCP with port-identifier, which is random, switch created identifier. In practice it means that any machine connected to such configured port will always get the same IP address, regardless of what that machine's MAC address is. I want to have that feature configured on --some ports-- only. But no matter what commands I try it seems that this can only be done for all ports, all for none. Even though CISCO manual seems to indicate there's both global and per-port command to enable that. Here are relevant commands from CISCO manual: configure terminal ip dhcp use subscriber-id client-id (this configures the DHCP server to globally use the subscriber ID as the client ID on all incoming DHCP messages) interface FastEthernet0/1 ip dhcp server use subscriber-id client-id (Optional: Configures the DHCP server to use the subscriber ID as the client ID on all incoming DHCP messages on the interface) but it appears if I configure only per-interface than there's no effect at all, if I configure globally and per interface - CISCo behaves as if all ports were configured to use that feature. Any ideas?

    Read the article

  • Bad Intel DQ965GF motherboard? Fails memtest, but memory is good.

    - by Boden
    I've got a machine with a DQ965GF motherboard. Two days ago it started locking up hard. Ran memtest 3.3, 1.7, and TestMem 4. TestMem just freezes, memtest failed on moving 8 bit inversions. Letting memtest run eventually causes the system to restart. I pulled memory sticks one by one, and then replaced the memory with a couple of known good sticks. No luck. I switched power supplies, didn't help. Swapped video cards just to be safe. No help. When I start the machine I get a single beep before it POSTs. According to the manual, a single beep means: 1 beep - Refresh Error (with nothing on the screen and it is not a video problem) I'm assuming that the motherboard has failed since it's obviously not a RAM or power issue. Do you agree? NOTE: I also tried resetting BIOS defaults, and even flashed the BIOS to the latest version. I also ran the Mersenne Prime Test and the CPU seems to click along just fine. (Tried logging in to superuser with openid but it's not working for me today. Hope this gets through)

    Read the article

  • Code to update HyperV Export file

    - by Andy Schneider
    I am using the HyperV Module from Codeplex to do a "config only" export from a 2008R2 Hyper-V server. In order to import the configuration on another HyperV server, I need to edit the value of CopyVMStorage in the EXP file. This file is an XML file. I wrote the following code in PowerShell to do the update for me. The variable $existing is the existing exp file. $xml = [xml](get-content $existing) $xpath = '//PROPERTY[@NAME ="CopyVmStorage"]' foreach ($node in $xml.SelectNodes($xpath)) {$node.Value = 'TRUE'} $xml.Save($existing) This code makes the correct changes to the XML. However, when I go to import the file on the Hyper-V server, I get an error that says the file format is incorrect. I am wondering if the encoding of the file is incorrect or if there is something else going on. If I edit the file manually in wordpad, it imports without an issue. The filename is a GUID with a .exp extension, and it appears that the file name is too long for notepad to open. Notepad throws an error trying to open the file, which is why I went with WordPad. I have noticed that the file that is updated with PowerShell comes out formatted whereas the raw file is xml all bunched together with no whitespace. Any ideas on what "file format" means in this HyperV error message and how I might be able to use my code to automate this change in the XML without changing the file format?

    Read the article

  • Tomcat Solr times out

    - by user568458
    (Plesk 10.4 centos 5.8 linux apache2 server, with Tomcat5 on port 8080 and Apache Solr) I get "The connection has timed out" on requesting domain.com:8080 or www.domain.com:8080 or ip.ad.dr.ess:8080 Every reason I can find why this might be seems not to be the case: Plesk thinks Tomcat is running fine and lists it as an active service. The firewall currently has an accept all rule on port 8080. There's nothing relevant in the catalina tomcat logs (/var/log/tomcat5) - just some stuff from last time tomcat was started. There's no record at all of the requests that fail. netstat -lnp | grep 8080 gives the following, which I beleive means Tomcat is listening to requests to port 8080 on all ip addresses from any ip and any port (please correct me if I'm wrong): : tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 4018/java This covers every cause of this time out that I can find - so I must be missing something fundamental. It seems Tomcat is running, listening to the right port, is getting an appropriate IP address, is not obstructed by a firewall and is not failing after receiving a request in a way which would be recorded in the logs (so I believe it can't be out of memory, or anything like that). I'm all out of ideas on how to continue debugging this. I must have overlooked something obvious. Can anyone help?

    Read the article

  • In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

    - by Bobby Burgess
    This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

    Read the article

  • Is there a good alternative to Videora iPod Converter?

    - by Richard
    I use Videora to convert my videos (in DivX/XviD format) to something I can play on my iPod Classic. I really dislike it. It's clunky, riddled with adverts, sometimes doesn't convert properly (the infamous "invalid public atom" error - see Google for more) and has a UI that truly stinks. On the upside, it's free, accepts a list of video files (via the oddly hard to find "1-click convert" button) and just gets on with the converting as it already knows the correct settings for my iPod. One final nice touch is that once they are converted, it'll automatically upload them into iTunes. Are there any alternatives which have all the upsides but none of the downsides? Bonus points if they can set the metadata in iTunes correctly for TV shows (season, show, episode) and delete the converted file afterwards (as my iTunes settings means that a copy is made elsewhere). I've looked at a bunch of applications (handbrake, virtualdub, mediacoder, format factory, any video converter, convertxtodvd) but many of them fail the "just select a list of files and get on with converting" test - let alone all the other features I want. I have no desire to individually set the video size of each file or the codec or the post-processing options. I'm currently using the command line version of HandBrake (handbrakecli) and a hand-written DOS batch file to go through every file in a folder and convert it. It does most of what I want, just not in a very slick way. Can anyone recommend anything better? It needs to work on Windows 7 and be free.

    Read the article

  • Authenticate domain-user credentials on unjoined virtual machine?

    - by bwerks
    Hi all, This question may sound silly, and perhaps a bit insane, but--is there any way to run a process on a machine not joined to a domain using credentials from a user in that domain? In my case, I'm running virtual machines installed with release binaries from our build process, as well as Visual Studio. Visual Studio is there to debug our release binaries, however it's being executed with vm-local user credentials. This means that it can't authenticate to our TFS deployment when executing "tf.exe view" to utilize our Source Server for debugging. Team Explorer manages to authenticate to TFS using a UI prompt, however I suspect that it's because we supply it with the TFS deployment's URI, and it's designed to display a prompt to facilitate workgroup scenarios; i.e. it's not like we're getting it for free. My instincts tell me the only way to authenticate on this vm is to join it or somehow form a one-way trust or something, but is there an easier way? For automation we're going to want to script this eventually, but I'm first surveying the feasibility of the thing.

    Read the article

  • Are flash drives and hard drives thought of as "an ocean of bytes"?

    - by Jian Lin
    Why can a USB Flash drive be formatted as NTFS or FAT32? Is the USB Flash Drive and Hard Drive just to be thought of as "an ocean of bytes"? I get very used to hearing formatting a hard drive as FAT32 or NTFS, but we can also format a USB Flash drive as NTFS or FAT32? Is it because a hard drive or Flash drive both can be thought of as "an ocean of bits" or "an ocean of bytes"? I remember RAM as: it takes 16 bit or 32 bit as an address signal (the 16 or 32 copper footing on the circuit board), and give out 8 bit of data (the other 8 copper footing on the circuit board). So can a hard drive be thought of as working that way too? So that's why a Flash drive can be the same too? Just an "ocean of bytes". But is it true that hard drive's hardware make it an ocean of sector or something else, that is, the smaller unit of read / write is not byte but something else? So with this "ocean of bytes", NTFS has the format that says, "if the first byte is __, then it means __ (it is a file or folder, and link to which sector, indicated by byte 2 and 3, etc, etc)"

    Read the article

  • How to convert Markdown files to Dokuwiki, on a PC

    - by Clare Macrae
    I'm looking for a tool or script to convert Markdown files to Dokuwiki format, that will run on a PC. This is so that I can use MarkdownPad on a PC to create initial drafts of documents, and then convert them to Dokuwiki format, to upload to a Dokuwiki installation that I have no control over. (This means that the Markdown plugin is no use to me.) I could spend time writing a Python script to do the conversion myself, but I'd like to avoid spending time on this, if such a thing exists already. The Markdown tags I'd like to have supported/converted are: Heading levels 1 - 5 Bold, italic, underline, fixed width font Numbered and unnumbered lists Hyperlinks Horizontal rules Does such a tool exist, or is there a good starting point available? Things I've found and considered I initially thought that txt2tags would be helpful, but although it can write both markdown and Dokuwiki, it is very tied to its own specific input format I've also seen Markdown2Dokuwiki, and although I'd certainly be willing to use a sed script, even on a PC, this only supports a tiny, tiny part of Markdown's syntax. python-markdown2 also sounded promising, but it only writes out HTML. pandoc - but it doesn't support Dokuwiki output MultiMarkdown - does not appear to support Dokuwiki output

    Read the article

  • Why can't I physically access my machine after a remote session?

    - by Steve Crane
    I have a Dell Optiplex 960 desktop running Windows 7 64-bit at work. I typically leave it locked rather than logged off when I go home, so that I'm able to remote in from home and continue working if I wish. This is where the problem comes in. If I don't remote in there is no problem and I can simply unlock the next morning. It's when I do remote in that I have a problem. Remote sessions work as expected but when I get to work the next morning the machine appears to have gone into a sleep or hibernate state, from which no amount of mouse moving or keyboard pounding will wake it. The machine is not hanging as remote sessions to it are still possible; it seems that physical access from it's own mouse and keyboard are lost. The only way to gain access is to press and hold the power switch for several seconds until the machine shuts down. Of course this means Windows does not gracefully shut down and after powering up it takes several minutes for the machine to boot and reach the login prompt; presumably while it checks the disk. Has anyone else seen something like this?

    Read the article

  • Can a folder on a NAS be made available as a physical drive in VMWare?

    - by asbjornu
    We are currently in the process of moving from a single web server to two load balanced web servers and are facing some challenges we don't quite know how to fix. One of these is that the current single server hosts applications that write stuff to disk. The applications running on the server expects that when something is written to disk it later will in fact exist, so it's important that this premise is fulfilled with the dual server architecture as well. The dual server setup is a couple of VMWare instances with Windows Server 2008 R2 as the guest operating system. Out of the box, these instances does not share any kind of file system, so just moving the applications over would make them break since one instance would write something to the file system that doesn't exist on the other. Thus we need to share a file system between the two virtual servers. Our host has proposed to create a network share on a SAN and map this share individually on each virtual machine. This doesn't work too well due to NTFS permissions, etc., because the share needs to be accessed by several independent web applications that won't even be in the same application pool. The only solution that kind of works is to hard code an "identity" for each web application into its web.config file, but this means password in clear text which doesn't sit well with me. Since the servers are virtual, I'm thinknig: Wouldn't it be possible to make a NAS area available as a physical disk in the gues operating system somehow? Since VMWare has full control of the virtual hardware, you'd think it would be able to "fake" a local hard drive in the virtual machine that in reality is a folder on a NAS, but so far I haven't found anything that states how and if this is possible. So I have to ask the wonderful Server Fault community: Can a folder on a NAS be made available as a physical drive (typical D:) in both of the virtual machines?

    Read the article

  • Attaching 3.5" desktop drive to MacBook SATA

    - by Kyle Cronin
    I have a mid-2007 MacBook that, according to the Apple Store, has suffered some liquid damage and requires a new logic board to operate correctly, a ~$750 repair I've been told (would normally be around ~$300 were it not for the "liquid damage"). The unit itself works fine - the only problem I've been having is that the system does not recognize the battery and will not charge it. Curiously, the system can still be powered by the battery and even recognizes when the power cord is detached by diming the backlight, but I digress. Now that this laptop will likely become a desktop, I'm wondering if it might be possible to attach a desktop drive. I recently purchased a 2TB SATA drive and I'm wondering if it's possible to somehow attach it where the current internal drive connects. Obviously the drive itself will not fit inside the device, but as the unit will spend the rest of its days on my desk, that's not really much of an issue. My main questions are: Is this possible? If so, how would I connect the drive? Would a SATA extender cable work? Is the SATA port on my MacBook capable of powering a desktop drive? Or should I just get a SATA male-to-female cable and see if I can power the drive through other means (a cheap power supply, for example) The disk I'm referring to is the Hitachi Deskstar HD32000. Though I couldn't find that exact model on Hitachi's support site, these are the power requirements for a similar drive, the 7K2000 (2TB, 7200RPM, SATA II): Power Requirement +5 VDC (+/-5%) +12 VDC (+/-10%) Startup current (A, max.) 1.2 (+5V), 2.0 (+12V) Idle (W) 7.5 From what I've read, 2.5" drives require 5V, meaning that my MacBook obviously is capable of producing it. The specs seem to suggest that this drive seems capable of accepting it instead of the typical 12V - is this an accurate interpretation of the power requirements? Or does it need both 12V and 5V?

    Read the article

  • How to replicate a windows servers (IIS,Files,ConfigurationState)?

    - by Geo
    Maybe a better question is: What is the closest competitor for DoubleTake? I am looking to replicate a windows production server in case it fails have a immediate backup. Any idead? NOTE 1: I forget to add that this server is on the EC2 Amazon Cloud. NOTE 2: The main situation we have is recreating the configuration settings like IIS, FTP Server, SQL Server, SVN Server. NOTE 3: So far I have been giving three options as answers for my original question: AppAssurance -- After talking to their sales team they do not support Amazon as cloud provider. Basically there is a technical need to be able to reboot from a disk or similar media. So ESX Virtual machine environment will work, but not the EC2. Acronis -- which works as a backup in ghost style. This will work for other type of scenarios. Use the Amazon EC2 API -- This option is ideal, but only works if you are developing a cloud application rather than hosting a regular application in a cloud scenario. This means that I am still looking for the answer. Any other ideas.

    Read the article

  • PHP 5.4.9 Mysqli issue

    - by Vitaly
    On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

    Read the article

  • Multiple *NIX Accounts with Identical UID

    - by Tim
    I am curious whether there is a standard expected behavior and whether it is considered bad practice when creating more than one account on Linux/Unix that have the same UID. I've done some testing on RHEL5 with this and it behaved as I expected, but I don't know if I'm tempting fate using this trick. As an example, let's say I have two accounts with the same IDs: a1:$1$4zIl1:5000:5000::/home/a1:/bin/bash a2:$1$bmh92:5000:5000::/home/a2:/bin/bash What this means is: I can log in to each account using its own password. Files I create will have the same UID. Tools such as "ls -l" will list the UID as the first entry in the file (a1 in this case). I avoid any permissions or ownership problems between the two accounts because they are really the same user. I get login auditing for each account, so I have better granularity into tracking what is happening on the system. So my questions are: Is this ability designed or is it just the way it happens to work? Is this going to be consistent across *nix variants? Is this accepted practice? Are there unintended consequences to this practice? Note, the idea here is to use this for system accounts and not normal user accounts.

    Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >