Search Results

Search found 10344 results on 414 pages for 'mac mini'.

Page 255/414 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• Can't install Ubuntu, black screen after install

  - by Tyrone

  I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

  Read the article

• USB mass storage couldn't get mounted

  - by revo

  It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• How to diagram custom programming languages, non textual?

  - by Adam

  I've used and created domain-specific languages before, plenty of times (e.g. using yacc/lex). Normally we'd start with grammar written in BNF, and a bunch of keywords. This is easy to do, easy to share. Recently, I've started working with diagrammatic programming languages - closest parallel is circuit-diagrams in electronics, where it's very difficult to express ideas in text, but very easy to express them in wiring-diagrams. This is a new and novel problem for me: how to efficiently express these mini-languages, and share concepts in them with colleagues? (i.e. how to whiteboard-program within them. Actual programming is easy - you have physical components to hand) Are there tools for this? Or good/best practices (e.g. equivalent of "always use BNF as starting point for your new DSL, and use tools like yacc to generate the parser, compiler, etc"). My googlefu is proving weak - all I get is false positives for wiring diagrams, and UML editors (since these are custom languages, UML doesn't seem to help)

  Read the article

• Multiple monitors showing same screen but different resolutions

  - by Luis Alvarado

  Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

  Read the article

• Ubuntu won't fit 10" netbook's native display

  - by Daniel

  I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is some bits of the system doesn't fit the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as I can see the Unity Launcher. My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, the desktop area is lowered, with bits of it hidden beneath the screen; & there's a black space left at the top of the screen. I had to revert to the old setting 1024x768 to push the desktop upwards and remove the black space.

  Read the article

• CodePlex Daily Summary for Sunday, June 26, 2011

  CodePlex Daily Summary for Sunday, June 26, 2011Popular ReleasesDroid Builder: Droid Builder - 1.0.4194.38898: Support new type of patch package. Support plugin framework.Mosaic Project: Mosaic Alpha build 254: - Added horizontal scroll by mouse in fullscreen mode - Widgets now have fixed size - Reduced spacing between widgets - Widgets menu is scrollable by mouse now and not overlapping back button on small screens.Net Image Processor: v1.0: Initial release of the library containing the core architecture and two filters. To install, extract the library to somewhere sensible then reference as a file from your project in Visual Studio.Usage Agent: Usage Agent 9.0.8: Latest release. Changes include: - Fixes for Optus - Usage Delta statistic for BigPond - Eliminated the need for UAC prompt at every startupjQuery List DragSort: jQuery List DragSort 0.4.3: Fix item not dropping correctly on Chrome and jQuery 1.6KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.TerrariViewer: TerrariViewer v3.3 [v1.0.5 Compatible]: I have added support for all the new items in Terraria v1.0.5. I have also added the ability to put your character in hardcore mode or take them out via a simple checkbox on the stats tab. If you come across any bugs, please let me know immediately.Media Companion: MC 3.409b-1 Weekly: This weeks release is part way through a major rewrite of the TVShow code. This means that a few TV related features & functions are not fully operational at the moment. The reason for this release is so that people can see if their particular issue has been fixed during the week. Some issues may not be able to be fully checked due to the ongoing TV code refactoring. So, I would strongly suggest that you put this version into a separate folder, copy your settings folder across & test MC that...Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...MiniTwitter: 1.70: MiniTwitter 1.70 ???? ?? ????? xAuth ?? OAuth ??????? 1.70 ??????????????????????????。 ???????????????? Twitter ? Web ??????????、PIN ????????????????????。??????????????????、???????????????????????????。Total Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.7b: Total Commander SkyDrive File System Plugin version 0.8.7b. Bug fixes: - BROKEN PLUGIN by upgrading SkyDriveServiceClient version 2.0.1b. Please do not forget to express your opinion of the plugin by rating it! Donate (EUR)SkyDrive .Net API Client: SkyDrive .Net API Client 2.0.1b (RELOADED): SkyDrive .Net API Client assembly has been RELOADED in version 2.0.1b as a REAL API. It supports the followings: - Creating root and sub folders - Uploading and downloading files - Renaming and deleting folders and files Bug fixes: - BROKEN API (issue 6834) Please do not forget to express your opinion of the assembly by rating it! Donate (EUR)Mini SQL Query: Mini SQL Query v1.0.0.59794: This release includes the following enhancements: Added a Most Recently Used file list Added Row counts to the query (per tab) and table view windows Added the Command Timeout option, only valid for MSSQL for now - see options If you have no idea what this thing is make sure you check out http://pksoftware.net/MiniSqlQuery/Help/MiniSqlQueryQuickStart.docx for an introduction. PK :-]HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.2.591 Beta Release: 1.2.591 Beta Releasepatterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DropBox Linker: DropBox Linker 1.3: Added "Get links..." dialog, that provides selective public files links copying Get links link added to tray menu as the default option Fixed URL encoding .NET Framework 4.0 Client Profile requiredDotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsBlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at ...New Projects6_6_6_w_m_s_open: jwervxsdfcfcf: cfcfChairforce hackathon project: project for hackathonDot Net Nuke Ajax Modules: This is a small collection of modules I think on once in a while which intend to improve a little dnn's user experience.Gnosis Game Engine: A simple game engine for the XNA 4.0 frame work that I am working on, mostly as a learning experience. I found that XNA game engines either require you to pay or are XNA 4.0 incompatible, and so this is my solution to that problem.KA_WindowsPhone7_Samples: Sample Code for Windows Phone 7 from http://kevinashley.comKinect MIDI Controller: This tool allows you to use a Kinect Sensor as a MIDI Controller for your Digital Audio Workbench. The tool is written in C#, and uses Microsoft Kinect SDK. Mosaic Project: Mosaic is an application that brings Metro UI to your desktop by live widgets.Movie Gate: A movie database that is also able to play the movies with your favorit media player.Musical Collective: An open-source web service that enables Musicians to collaborate on songs. Written in ASP.NET MVC (C#).NcADS-MVC: Clasificados MVCPokeTD: Ein kleines 2D Pokemon Tower-Defense Spiel. Es ist in C# und XNA geschrieben.PRO-TOKOL: PRO-TOKOL Server is a Programmable Logic Controller communication driver. The project is 100% coded in .NET Managed code. So, the dll can be included in any .NET project. The project uses the Microsoft Workflow Foundation to implement the DF1 Receiver and Transmitter logic.ShumaDaf: small project for display movies info directly from file structure using mymovies.xml. program create one simple xml file and display it!Silverlight Policy Service: The windows service act as a server and listens on TCP port 943 using IPv4 and IPv6. The socket policy included in the project allows all silverlight client applications to connect to TCP ports 4502-4506.SkinObject Module Wrapper: The SkinObject Module Wrapper is a DotNetNuke module that will allow you to add any DNN SkinObject to a page dinamically as if it was a DNN Module. Without any skin modification you can now inject new SkinObjects to you pages, configure the properties and change them on the fly.SkyNet0.3: Program that one should not be able to close.Team Zero Game One: SVN for the personal project(s) of Team Zero - Game One. We are creating a free game in HTML5 canvas using the CAKE api, found here: http://code.google.com/p/cakejs/ The game is about programming a small robot to move through a maze, sneaking past guards and other obstacles, using event-based programming. We've seen a number of games that allow you to "program" a character, and thought it would be interesting to do a different take on it. The game is still in early production, and actively ...Test-Driven Scaffolding (TDS): TDS helps developers of C# function members (methods, indexers, etc.) to quickly write drivers for code under development; these can easily be converted later to NUnit tests. TDS consists of C# code that can be pasted into a new or existing project and removed when no longer needed.Usage Agent: The Usage Agent toolset is designed to help manage your ISP data usage without having to log into your ISP usage page. It can optionally monitor your network card throughput and produce reports on usage. Developed in VB.NET.

  Read the article

• Where can I find design exercises to work on?

  - by Oak

  I feel it's important to continue practicing my problem-solving skills. Writing my own mini-projects is one way, but another is to try and solve problems posted online. It's easy to find interesting programming quizzes online that require applying clever algorithms to solve - Project Euler is one well-known example. However, in a lot of real-life projects the design of the software - especially in the initial phases - has a large impact and at later stages it cannot be tweaked as easily as plain algorithms. In order to improve these skills, I'm looking for any collection of design problems. When I say "design", I mean the abstract design of a software solution - for example what modules will there be and what are the dependencies between them, how data will flow in the program, what sort of data needs to be saved in the database, etc. Design problems are those problems that are critical to solve in the early stages of any project, but their solution is a whiteboard diagram without a single line of code. Of course these sort of problems do not have a single correct solution, but I'll be especially happy with any place that also displays pros and cons of the typical solutions that might be used to approach the problem.

  Read the article

• Putting Together a Game Design Team?

  - by Kaia

  I'm attempting to put together a game design team that is willing to help me design/program, test, and somewhat produce the game we make to the public. I need anyone who knows anything about programming/coding, designing, etc. Once we get it up and running and out into the world (over dramatic maybe? haha) I have ideas of generating a profit from it so there is a possibility of payment. My thinking on it (so far) is this: 2D (possibly. I haven't decided if I want it 2D or 3D. It really depends on what is easier) 3rd person. Adventure (I want there to be a point to it, but like a point with no real end) I want there to be a story to it. If you've ever played Dofus, think like that. There is a story to the game, but no real end. I want (if possible) to include mini-games. These could end up becoming a possible way for a player to aquire in-game money, quest items, etc. If anyone is interested in helping me create the story line/script (which we will finsih first, before creating the game) please contact me. I want to get this completed as soon as possible.

  Read the article

• CodePlex Daily Summary for Thursday, May 22, 2014

  CodePlex Daily Summary for Thursday, May 22, 2014Popular ReleasesTerraMap (Terraria World Map Viewer): TerraMap 1.0.5: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors. Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed installer not uninstalling older versions T...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-2.5.434.0: Issue hot fixed: 102.127666 - Incorrectly formed command EXCEPT () in MDX query for the exclusion of several elements among of the subordinates 102.132877 - Incorrectly generate MDX query with using VisualTotals, the function HIERARCHIZE - should be inside 102.132887 - If in the MemberChoice select an item with child, and then delete one of the child, the parent misses the result build the test project (...\Users\Public\Documents\Ranet.UILibrary.Olap-2.5 Samples\UILibrary.Olap\Cs\Ranet...R.NET: R.NET 1.5.13: R.NET 1.5.13 is a beta release towards R.NET 1.6. You are encouraged to use it now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.13 Changed the nuget packaging to distribute via nuget.org at R.NET Community and R.NET FSharp Utility. Without entering into details, this was necessary to facilitate the distribution of the packages. You are strongly encouraged to use nuget to manage the dependency of your work on R.NET, rather than the bin...Adaptive Access Layers: AAL 2.0: Major rework with breaking changes. Much more flexible registration of implementation strategy and support for methods, properties and events.Google Analytics SDK for Windows 8 and Windows Phone: Google Analytics SDK 1.2.08: Recommended for Xaml/C# developers: Download the package through NuGet. Recommended for JS and C++ developers: Download the new native vsix (Visual Studio SDK) package above. NEW FEATURES & FIXESSee the full list of changes since the last public release SHOUT OUTSDacianMujdar for the pull request to add support for campaigns. aclassen for the pull request to add support for resolved phone models in the WP7 & 8 Silverlight versions. Alan Mendelevich for great open source library PhoneNam...DbSharp: DbSharpApplication (Binary files): A zip file that include DbSharpApplication.exe. Initial release.Multiwfn: Multiwfn 3.3.3: Multiwfn 3.3.3WebExtras: v1.4.0-Beta-1: Enh: Adding support for jQuery UI framework Enh: Adding support for jqPlot charting library Dropping dependency on MoreLinq library Note: Html.LabelForV2(...) extension method has now been deprecated. You should use Html.RequiredFieldLabelFor(...) extension method instead. This extension method will be removed in future versions.????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。MISAO: Ver. 5.4: Fix bugs (Nicovideo viwer add-in) Add Masakari option (Nicovideo viwer add-in)QuickMon: Version 3.11: This release adds some major changes to the core monitoring engine. 1. Polling overrides: Each collector entry can specify a minimum time updating is allowed for it and dependent collector entries. 2. Polling frequency sliding: Additional to polling overrides a collector entry can specify 'sliding' polling frequency if the state remains the same. This means the frequency slows down reducing overhead of polling on a stagnant resource. 3. The monitor pack has an overriding frequency. If used...Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.WordMat: WordMat v. 1.06: Check WordMat.blogspot.com for a complete description of new features.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...New Projects<a href="jAvAsCrIpT&colon;alert&lpar;69&rpar;">CLICK HERE TO GET FREE MONEY</a>: <a href="jAvAsCrIpT&colon;alert&lpar;69&rpar;">CLICK HERE TO GET FREE MONEY</a> canopyazure: canopyazureCI&T ULS Log Viewer: Ferramenta para ajudar o desenvolvedor Sharepoint analisar os arquivos de log.EmissorCTE: E uma DLL que ira enviar, receber e cancelar o CTE, também ira fazer geração do DACTEF5 BIG-IP Local Traffic Manager: A .NET wrapper for F5 iControl service-enabled management API.Hydrodesktop Excel-Addin: HydroDesktop ExcelPage Manifest Extractor: Extract a Sharepoint Page Manifest/XMLProject Euler Solutions By multiple1902: Project Euler Solutions in FSharp. By Weisi Dai (multiple1902) <weisi@x-research.com>VerySimpleBackup: Simple command line tool for backup any directory (using Volume Shadow Copy), using archiving (ZIP) with optional password and copy it to FTP (cycle supported).Waf Music Manager: The Waf Music Manager is a simple and fast application that makes fun to manage the local music collection.?????-?????【??】?????????: ??????????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ??????-??????【??】??????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ??????-??????【??】??????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！

  Read the article

• A Virtual Seat at the Architect&rsquo;s Table

  - by Bob Rhubart

  I always have fun producing the Arch2Arch podcasts, but the latest batch was all that and a bag of chips, since I was required to do absolutely no preparation and very little talking, and since the conversation was reminiscent of those I’ve had with various architects (you know who you are) in various watering holes: free-ranging, extemporaneous, and far, far from dull. The three most recent programs were recorded during a virtual mini meet-up of architects back in February.  You’ll find more detail here, but in a nutshell, I invited several previous Arch2Arch panelists to join me on Skype to talk about whatever was on their minds.  The resulting conversation yielded the three latest programs. Check them out – it’s like you’re sitting at the table. Listen to Part 1 Listen to Part 2 Listen to Part 3 The conversation begins with the participant’s responses to my challenge to fill in the blank in the sentence “Most conversations about Enterprise Architecture are too ____.” From there the conversation morphed into a discussion of the sheer joy of finding funding for architecture projects. The architects seated at the virtual table in these programs are:  Todd Biske, a veteran enterprise architect and the author of the book SOA Governace, from Packt Publishing. ( LinkedIn | Twitter | Blog | Oracle Mix ) Jordan Braunstein, an Oracle ACE Director and the Business Integration and Architecture Partner at TUSC. (Blog | Twitter | LinkedIn | Oracle Mix) Basheer Khan,  also an Oracle ACE Director, and the founder and CEO of Innowave Technology (Blog | LinkedIn | Twitter | Oracle Mix) Pat Shepherd, an enterprise architect with the Oracle Enterprise Solutions Group. (Oracle Mix | LinkedIn | Blog) Coming Soon I was so pleased with the results of this meet-up format that I did the same thing for the next series of programs.  These free-ranging conversations feature a different group of participants, covering a different set topics, including the fear of SOA, the misunderstanding and misinformation behind that fear, and the idea of beauty in architecture. Yeah, you read that right. So stay tuned: RSS   Technorati Tags: oracle,otn,enterprise architecture,podcast. arch2arch,meet-up del.icio.us Tags: oracle,otn,enterprise architecture,podcast. arch2arch,meet-up

  Read the article

• System in low graphics, deleted linux, grub rescue, can't access windows

  - by First timer

  So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

  Read the article

• 45 Different Services, Sites, and Apps to Help You Read Your Favorite Sites (Like How-To Geek)

  - by Eric Z Goodnight

  Ever wonder how geeks stay connected with their favorite blogs and writers? Read on to learn about RSS feeds and how easy they are to use with these 45 apps, services, and websites that can help you stay current. Note: of course, our more geeky readers are going to understand a lot of this already, which is why we included 45 great services that you might not have heard about before. Keep reading for more, or give you advice to the newbies in the comments Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Lord of the Rings Movie Parody Double Feature [Video] Turn a Webpage into an Asteroids-Styled Shooting Game in Opera Dolphin Browser Mini Leaves Beta; Sports New GUI, Easy Bookmarking, and More Updated Google Goggles Scans Faster; Solves Sudoku Puzzles Snowy Castle Retreat in the Mountains Wallpaper Fix TV Show Sorting Issues on iOS Devices

  Read the article

• Massive 404 attack with non existent URLs. How to prevent this?

  - by tattvamasi

  The problem is a whole load of 404 errors, as reported by Google Webmaster Tools, with pages and queries that have never been there. One of them is viewtopic.php, and I've also noticed a scary number of attempts to check if the site is a WordPress site (wp_admin) and for the cPanel login. I block TRACE already, and the server is equipped with some defense against scanning/hacking. However, this doesn't seem to stop. The referrer is, according to Google Webmaster, totally.me. I have looked for a solution to stop this, because it isn't certainly good for the poor real actual users, let alone the SEO concerns. I am using the Perishable Press mini black list (found here), a standard referrer blocker (for porn, herbal, casino sites), and even some software to protect the site (XSS blocking, SQL injection, etc). The server is using other measures as well, so one would assume that the site is safe (hopefully), but it isn't ending. Does anybody else have the same problem, or am I the only one seeing this? Is it what I think, i.e., some sort of attack? Is there a way to fix it, or better, prevent this useless resource waste? EDIT I've never used the question to thank for the answers, and hope this can be done. Thank you all for your insightful replies, which helped me to find my way out of this. I have followed everyone's suggestions and implemented the following: a honeypot a script that listens to suspect urls in the 404 page and sends me an email with user agent/ip, while returning a standard 404 header a script that rewards legitimate users, in the same 404 custom page, in case they end up clicking on one of those urls. In less than 24 hours I have been able to isolate some suspect IPs, all listed in Spamhaus. All the IPs logged so far belong to spam VPS hosting companies. Thank you all again, I would have accepted all answers if I could.

  Read the article

• CodePlex Daily Summary for Tuesday, August 19, 2014

  CodePlex Daily Summary for Tuesday, August 19, 2014Popular ReleasesVG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksLinq 4 Javascript: Version 2.4: Minor Changes Made Added Count() and Count(with where clause) Distinct will now use a dictionary instead of a custom dictionary object Organize the unit tests. The variable names will actually make sense and won't be 2 letters. SelectMany will now use the queryable logic.Magick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeNew Projectsangle.works: Angle.works sample solutionAutomatically Update CMS from SCOM: Microsoft Central Management Server (CMS) was released with SQL Server 2008; however keeping the server list up-to-date is challenging.BLE for NETMF: Class library targeted to .NET Micro Framework for BLE support (both central and peripheral profiles).CIIS: ciisClipboard Calculator: Simple tool to calculate numbers from the clipboard. Useful for SQL Server Management Studio User.CYCLOPS: CYCLOPS is a project that seeks to aid the development and testing of ANPR software. CYCLOPS provides a virtual camera and virtual frame grabber for image procedemo4: demo4eAsset: Web based Fixed Asset Management SystemEFML-Runtime: Create applications with xml,css,js feeadmin: Complete fee managementFinal Fantasy VI Randomizer: This is a simple program that randomizes skills, items, and characters in Final Fantasy VI. It is used for racing the game.Object Editor: Object Editor is a visual editor which allows to edit any properties of any class and to simplify the changing and displaying of a class instance.pbb: Pinoy Badminton Buddies Web ApplicationRubyFeed: RubyFeed is a stand-alone HTML5 page for Internet Explorer on Windows 8 and above that makes it easy to view and manage your Windows RSS Platform feeds.

  Read the article

• Slow NFS and GFS2 performance

  - by Tiago

  Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

  Read the article

• OSI Model

  - by kaleidoscope

  The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer ·         Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. ·         Establishment and termination of a connection to a communications medium. ·         Participation in the process whereby the communication resources are effectively shared among multiple users. ·         Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer ·         Provides the functional and procedural means to transfer data between network entities. ·         Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). ·         Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. ·         The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. ·         MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. ·         LLC layer controls frame synchronization, flow control and error checking.   Layer 3: Network Layer ·         Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. ·         Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. ·         Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible.   Layer 4: Transport Layer ·         Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. ·         Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. ·         Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer ·         Controls the dialogues (connections) between computers. ·         Establishes, manages and terminates the connections between the local and remote application. ·         Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. ·         Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer ·         Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. ·         Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer ·         This layer interacts with software applications that implement a communicating component. ·         Identifies communication partners, determines resource availability, and synchronizes communication. o       When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o       When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o       In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

  Read the article

• How to Watch NCAA March Madness Online

  - by DigitalGeekery

  You’ve filled out your brackets and now you are ready for one of America’s most popular sporting events. But what if you are you stuck at work or away from your TV?  Or your local affiliate is showing a different game? Today we show how to catch all the March Madness online. March Madness on Demand You’ll need a broadband connection, 512 MB RAM or higher, with cookies and Javascript enabled in your browser. March Madness on Demand offers two viewing options, a Standard Player and a High Quality player. The High Quality player is not, unfortunately, high definition. Standard Player Requirements Windows XP/Vista/7 or Mac OS X IE 6+ (We also successfully tested it in Firefox, Chrome, & Opera) Adobe Flash Player 9 or higher High Quality Player Requirements 2.4 GHz Pentium 4 or Intel-based Macintosh Mac OS 10.4.8+ (Intel-based) Windows: XP SP2, Vista, Server 2003, Server 2008, Windows 7 Firefox 1.5+ or IE 6/7/8 Silverlight 3 browser plug-in Watching March Madness on Demand Go to the March Madness on Demand website. (Link below) Check the “Watch in High Quality” section to see if your browser is ready and compatible for the High Quality viewer. If not, you’ll see a message indicating either your browser and system are incompatible… Or that you need to install Silverlight. To install Silverlight, click on the “Get HQ” button and follow the prompts to download and install Silverlight. To launch the player, click the large red “Launch Player” button. At the top of the screen, you’ll see the current and upcoming games. Click on “Watch Now” below to begin watching. At the bottom left, is where you click to watch with the High Quality player. If to many people are watching the High Quality player, you’ll see the following message and have to go back to the Standard Player. At the lower right are volume controls, a “Full Screen” button, and a “Share” button which allows you to share the game you are watching on various social networking sites like Facebook and Twitter. Perhaps most importantly for those who want to steal a bit of viewing time while at work is the “Boss Button” at the top right. Clicking on the “Boss Button” will open a fake Office document so it may appear at first glance like you’re actually doing legitimate work. To return to the game, click anywhere on the screen with your mouse. You’ll be able to catch every single game of the tournament from the first round all the way through the championship with March Madness on Demand. If your computer and Internet connection can handle it, you can even watch multiple games at the same time by opening March Madness on Demand in multiple browser windows. Watch March Madness online Similar Articles Productive Geek Tips Weekend Fun: Watch Television on Your PC with AnyTVWatch NFL Sunday Night Football On Your PCWatch TV On Your PC with FreeZ Online TVGeek Fun: Download Favorite NBC Programs for FreeDitch the RealPlayer Bloat with Real Alternative TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet

  Read the article

• Creating and using VM Groups in VirtualBox

  - by Fat Bloke

  With VirtualBox 4.2 we introduced the Groups feature which allows you to organize and manage your guest virtual machines collectively, rather than individually. Groups are quite a powerful concept and there are a few nice features you may not have discovered yet, so here's a bit more information about groups, and how they can be used.... Creating a group Groups are just ad hoc collections of virtual machines and there are several ways of creating a group: In the VirtualBox Manager GUI: Drag one VM onto another to create a group of those 2 VMs. You can then drag and drop more VMs into that group; Select multiple VMs (using Ctrl or Shift and click) then  select the menu: Machine...Group; or   press Cmd+U (Mac), or Ctrl+U(Windows); or right-click the multiple selection and choose Group, like this: From the command line: Group membership is an attribute of the vm so you can modify the vm to belong in a group. For example, to put the vm "Ubuntu" into the group "TestGroup" run this command: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup" Deleting a Group Groups can be deleted by removing a group attribute from all the VMs that constitute that group. To do this via the command-line the syntax is: VBoxManage modifyvm "Ubuntu" --groups "" In the VirtualBox Manager, this is more easily done by right-clicking on a group header and selecting "Ungroup", like this: Multiple Groups Now that we understand that Groups are just attributes of VMs, it can be seen that VMs can exist in multiple groups, for example, doing this: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup","/ProjectX","/ProjectY" Results in: Or via the VirtualBox Manager, you can drag VMs while pressing the Alt key (Mac) or Ctrl (other platforms). Nested Groups Just like you can drag VMs around in the VirtualBox Manager, you can also drag whole groups around. And dropping a group within a group creates a nested group. Via the command-line, nested groups are specified using a path-like syntax, like this: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup/Linux" ...which creates a sub-group and puts the VM in it. Navigating Groups In the VirtualBox Manager, Groups can be collapsed and expanded by clicking on the carat to the left in the Group Header. But you can also Enter and Leave groups too, either by using the right-arrow/left-arrow keys, or by clicking on the carat on the right hand side of the Group Header, like this: . ..leading to a view of just the Group contents. You can Leave or return to the parent in the same way. Don't worry if you are imprecise with your clicking, you can use a double click on the entire right half of the Group Header to Enter a group, and the left half to Leave a group. Double-clicking on the left half when you're at the top will roll-up or collapse the group.   Group Operations The real power of Groups is not simply in arranging them prettily in the Manager. Rather it is about performing collective operations on them, once you have grouped them appropriately. For example, let's say that you are working on a project (Project X) where you have a solution stack of: Database VM, Middleware/App VM, and  a couple of client VMs which you use to test your app. With VM Groups you can start the whole stack with one operation. Select the Group Header, and choose Start: The full list of operations that may be performed on Groups are: Start Starts from any state (boot or resume) Start VMs in headless mode (hold Shift while starting) Pause Reset Close Save state Send Shutdown signal Poweroff Discard saved state Show in filesystem Sort Conclusion Hopefully we've shown that the introduction of VM Groups not only makes Oracle VM VirtualBox pretty, but pretty powerful too.  - FB 

  Read the article

• VirtualBox 3.2 is released! A Red Letter Day?

  - by Fat Bloke

  Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

  Read the article

• Sunshine after the iCloud release?

  - by Laila

  "Why should I believe them? They're the ones that brought us MobileMe? It was not our finest hour, but we learned a lot." Steve Jobs June 6th 2011 Apple's new cloud service has been met with uncritical excitement by industry commentators.  It is wonderful what a rename can do.  Apple has had a 'cloud' offering for three years called MobileMe, successor to .MAC and  iTools, so iCloud is now the fourth internet service Apple have attempted. If this had been Microsoft, there would have been catcalls all around the blogosphere.  I'll admit that there is a lot more functionality announced for iCloud than MobileMe has ever managed to achieve, but then almost anything has more functionality than MobileMe.  It's an expensive service (£120 a year in the UK, $90 in the states), launched as far back as  June 9, 2008, that has delivered very little and suffered a string of technical problems; the documentation was mainly  a community effort, built up gradually by the frustrated and angry users. It was supposed to synchronise PC Outlook calendars but couldn't manage Microsoft Exchange (Google could, of course). It used WebDAV to allow Windows users to attach to the filestore, but didn't document how to do it. The method for downloading and uploading files to the cloud-based filestore was ridiculously clunky. It allowed you to post photos on a public site, but forgot to include a way of deleting photos. I could go on with the list, but you can explore the many sites that have flourished to inhabit the support-vacuum left by Apple. MobileMe should have had all the bright new clever things announced for iCloud. Apple dropped the ball, and allowed services such as Flickr to fill the void. However, their PR skills are such that, a name-change later (the .ME.com email address remains), it has turned a rout into a victory, and hundreds of earnest bloggers have been extolling Apple's expertise in cloud matters. This must be frustrating for the other cloud providers who have quietly got the technology working right. I wish iCloud well, even though I resent the expensive mess they made of MobileMe. Apple promise that iCloud will sync files, apps, app data, and media across all the different iOS5 devices, Macs, and PCs. It also hopes to sync music across devices, but not video content. They've offered existing MobileMe users free use of the MobileMe service for a year as the product is morphed, and they will be able to transfer to iCloud when it is launched in the autumn.  On June 30, 2012, MobileMe will die, and Apple's iWeb is also soon to join iTools and .MAC in the hereafter. So why get excited about iCloud? That all depends on the level of PC integration. Whereas iOS5 machines will be full participants in the new world of data-sharing (Sorry iPod Touch users) what about .NET libraries? There is talk of synchronising 'My Pictures' libraries with iOS5 and iMac machines, but little more detail as yet. Apple has a lot to prove with iCloud and anyone with actual experience of their past attempts to get into cloud services will be wary.

  Read the article

• Open a File Browser From Your Current Command Prompt/Terminal Directory

  - by The Geek

  Ever been doing some work at the command line when you realized… it would be a lot easier if I could just use the mouse for this task? One command later, you’ll have a window open to the same place that you’re at. This same tip works in more than one operating system, so we’ll detail how to do it in every way we know how. Open a File Browser in Windows We’ve actually covered this before when we told you how to open an Explorer window from the command prompt’s current directory, but we’ll briefly review: Just type the follow command into your command prompt: explorer . Note: You could actually just type “start .” instead. And you’ll then see a file browsing window set to the same directory you were previous at. And yes, this screenshot is from Vista, but it works the same in every version of Windows. If that wasn’t good enough, you should really read how you can navigate in the File Open/Save dialogs with just the keyboard—now that’s a Stupid Geek Trick! Open a File Browser in Linux For this exercise, we’re going to assume that you’re using Gnome under a Linux flavor like Ubuntu, because that’s the most common. From your terminal window, just type in the following command: nautilus . And the next thing you know, you’ll have a file browser window open at the current location. You’ll see some type of error message at the prompt, but you can pretty much ignore that. You can also use “gnome-open .” if you want. Open Finder in Mac OS X All the Mac computers in this office are running Linux, so we haven’t had a chance to verify, but you should be able to use the following command on OS X to open Finder in the current terminal location: open . Open Dolphin on Linux KDE4 dolphin . Got any extra tips to help out your fellow readers? How do you do the same thing in KDE3? What about OS X? Leave your savvy advice in the comments, and maybe we’ll update the article. Or not. Either way, it’ll help somebody! Similar Articles Productive Geek Tips Keyboard Ninja: Concatenate Multiple Text Files in WindowsStupid Geek Tricks: Open an Explorer Window from the Command Prompt’s Current DirectoryHow to automate FTP uploads from the Windows Command LineShell Geek: Rename Multiple Files At OnceAdd "Open with gedit" to the right click menu in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• Server-Sent Events using GlassFish (TOTD #179)

  - by arungupta

  Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

  Read the article

• iPhone: Software Development And Distribution

  - by xsl

  I have a few quick questions about the iPhone software development. I did some research about the topic, but there are a few specific things I would like to ask here, because I will have to estimate the cost of the required hardware and software, before I am allowed to buy anything. I never did any Mac development nor have I ever owned an iPhone, so needless to say this is quite hard for me. I will buy an iMac mini with 2 GB RAM for iPhone development. I will have to use it at the same time as my regular PC, but the majority of the time I won't use the Mac at all. Do I have to buy an additional monitor, a mouse and a keyboard or is there a better solution? I will have to port a C library to the iPhone platform and develop an iPhone application that uses the ported library. Do I need anything else than the iPhone SDK to do this? If I use an external library (see above), can I test the application with the integrated emulator, or is it recommend to buy the device? In a later phase of the project I will have to buy an iPhone, but I will have to wait until the iPhone 4 is released here in Europe, because the application requires a camera. In addition to this I will have to send data to a remote webservice. Aside from these two things I don't require any other features. Can I just buy the iPhone online from another country (the iPhones here are sim locked), or should I buy one with a contract? When the application is ready, it will be installed on a few iPhones owned by our customer. Because of security reasons it is crucial that there is no third party involved in this process (i.e. the application should not be distributed on the app store). Is this possible?

  Read the article

• HTML5 video (mp4 and ogv) problems in Safari and Firefox - but Chrome is all good

  - by qryss

  Hi folks, I have the following code: <video width="640" height="360" controls id="video-player" poster="/movies/poster.png"> <source src="/movies/640x360.m4v" type='video/mp4; codecs="avc1.42E01E, mp4a.40.2"'> <source src="/movies/640x360.ogv" type='video/ogg; codecs="theora, vorbis"'> </video> I'm using Rails (Mongrel in development and Mongrel+Apache in production). Chrome (Mac and Win) can play either file (tested by one then the other source tags) whether locally or from my production servers. Safari (Mac and Win) can play the mp4 file fine locally but not from production. Firefox 3.6 won't play the video in either OS. I just get a grey cross in the middle of the video player area. I've made sure that both Mongrel and Apache in each case have the right MIME types set. From Chrome's results I know there is nothing inherently wrong with my video files or the way the files are being asked for or delivered. Anyone got any clues? Or even a clue as to how to diagnose the problem? For Firefox I looked at https://developer.mozilla.org/En/Using_audio_and_video_in_Firefox where it refers to an 'error' event and an 'error' attribute. It seems the 'error' event is thrown pretty well straightaway and at that time there is no error attribute. Very helpful... :( Help enormously appreciated! Thanks in advance... Chris

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >