Search Results

Search found 22521 results on 901 pages for 'output redirect'.

Page 255/901 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

  • Use TV (hdmi) with non-square pixels

    - by labsin
    I am having a problem when I connect my LG plasma tv (with a native resolution of 1024x768 pixels) to my 12.04 laptop. The pixels (actual pixels, not the signal) of my TV are stretched so it gets his 16:9 ratio. The pixels are rectangular (1.3333x1). Everything I display from my laptop oviously get stretched (4:3 stretched to 16:9). There is a different dpi in X and Y needed for it to display properly (some kind of anamorphic mode). Default Ubuntu uses a dpi of 96x96. I can change it using xrandr, but only square eg 100x100 or 70x70. Already looked here, but it seems Ubuntu totally ignore the displaySize in xorg.conf When I use the code below to see the dpi and nothing I do changes it. The displaySize also stays the same (calculated using 96 dpi and the resolution) xdpyinfo | grep -B2 resolution I use the propretary ATI drivers for my ATI Mobility Radeon HD 50xx but it is the same with the Radeon drivers. My temporary solution is to use: xrandr --output DFP1 --mode 1024x768 --scale 1.333333333333x1 --output LVDS --off But with this the right side of the screen is nog accesable. This is a known problem with xrandr --scale and ubuntu. This is because of a patch for the mouse/windows not going outside the screen. I search a way to change the DisplaySize or the dpi(to something not square like 128x96) when I connect the display.

    Read the article

  • Links for Getting Started with PowerShell for Office 365 and Exchange Online

    - by Brian Jackett
    This past week I worked with some customers who were getting started with using PowerShell against Exchange Online as part of their new Office 365 solution.  As you may know Exchange is not my primary focus area but since these customers’ needs centered around PowerShell I thought this would be a good opportunity to learn more.  What soon became apparent to me was a few things: The output / objects returned from Exchange Online vs. on-premises commandlets sometimes differ (mainly due to Exchange Online output needing to be serialized across the wire) Some of the community scripts posted on TechNet Script Center or PoSH Code Repository that work for on-premises won’t work against Exchange Online due to the above I went to multiple resources to get an introduction of using the Exchange Online commandlets      In light of the last item I would like to share some resources I gathered for getting started with the Exchange Online commandlets.  I will address the first two items in a follow up post that shows one sample script that I helped a customer fix.   Links Using PowerShell with Office365 http://blah.winsmarts.com/2011-4-Using_PowerShell_with_Office365.aspx   Administering Microsoft Office 365 using WIndows PowerShell http://blog.powershell.no/2011/05/09/administering-microsoft-office-365-using-windows-powershell/   Reference to Available PowerShell Cmdlets in Exchange Online http://help.outlook.com/en-us/140/dd575549.aspx   Windows PowerShell cmdlets for Office 365 http://onlinehelp.microsoft.com/en-us/office365-enterprises/hh125002.aspx   Role Based Access Control in Exchange Online http://help.outlook.com/en-us/140/dd207274.aspx   Exchange Online and RBAC http://blogs.technet.com/b/ilvancri/archive/2011/05/16/exchange-online-office365-and-rbac.aspx   Conclusion    Office 365 is being integrated into more and more customers’ environments.  While your PowerShell skills can still be used to manage certain portions of Office 365 (Exchange Online as of the time of this writing) there are a few differences in how data is passed back and forth.  Hopefully the links above will get you started on scripting against  cloud based services.         -Frog Out

    Read the article

  • svn diff including annotate/blame-alike information of when changes where made by who

    - by Wouter Coekaerts
    Can you add annotate/blame-alike information to svn diff, so that for every changed line it includes which user and revision changed that line? For example, an annotate-diff comparing revisions 8-10 could output something like: 9 user1 - some line that user1 deleted in revision 9 10 user2 + some line that user2 added in revision 10 The context, lines around it which haven't changed, may be included as well or not, doesn't matter. It's not just a matter of "quickly" writing a shell script combining the output of svn diff and svn annotate. annotate for example will never show you who removed a line. It's also not a matter of doing annotate on a revision in the past: We're not interested in who originally added the line that got removed (that's not the one who "caused" the diff), we want to know who removed it. I suspect the only way to implement something to do this is to inspect each and every commit between the two revisions being compared (and somehow map all the changes in the separate diffs to lines in the total diff)... Does there exist a tool that does something like that?

    Read the article

  • Comparing the Performance of Visual Studio's Web Reference to a Custom Class

    As developers, we all make assumptions when programming. Perhaps the biggest assumption we make is that those libraries and tools that ship with the .NET Framework are the best way to accomplish a given task. For example, most developers assume that using ASP.NET's Membership system is the best way to manage user accounts in a website (rather than rolling your own user account store). Similarly, creating a Web Reference to communicate with a web service generates markup that auto-creates a proxy class, which handles the low-level details of invoking the web service, serializing parameters, and so on. Recently a client made us question one of our fundamental assumptions about the .NET Framework and Web Services by asking, "Why should we use proxy class created by Visual Studio to connect to a web service?" In this particular project we were calling a web service to retrieve data, which was then sorted, formatted slightly and displayed in a web page. The client hypothesized that it would be more efficient to invoke the web service directly via the HttpWebRequest class, retrieve the XML output, populate an XmlDocument object, then use XSLT to output the result to HTML. Surely that would be faster than using Visual Studio's auto-generated proxy class, right? Prior to this request, we had never considered rolling our own proxy class; we had always taken advantage of the proxy classes Visual Studio auto-generated for us. Could these auto-generated proxy classes be inefficient? Would retrieving and parsing the web service's XML directly be more efficient? The only way to know for sure was to test my client's hypothesis. Read More >

    Read the article

  • Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

    - by Matt
    i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

    Read the article

  • VMware - I/O error - how to fix?

    - by Maya-G
    I'm running XP pro on VMware - it mounts and runs just fine. However, if I power down the VM and try to copy it, or even if I try to do a simple Mac Backup (using Carbon Copy Cloner), I get an i/o error at one very specific VMDK file. Here's a sample of the error - this from CCC: "12/20 22:49:30 Detected input/output error 12/20 22:49:33 rsync: read errors mapping "/Users/blahblah/Documents/Virtual Machines.localized/WindowsXP-Professional150G.vmwarevm/WindowsXP-Professional150G-000001-s065.vmdk": Input/output error (5)" How can I regain my ability to do backups of my Mac without this I/O error?

    Read the article

  • Server not sending a SYN/ACK packet in response to a SYN packet

    - by jeff
    Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

    Read the article

  • Why MySQL sat for 2 minutes doing nothing?

    - by Alex R
    This was a one-time thing, not reproducible... But I saved the show innodb status output. Can anybody tell what's going on here? The simple insert took almost 3 minutes to complete. | InnoDB | | ===================================== 110201 15:58:10 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 34 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 11963, signal count 11766 --Thread 1824 has waited at .\btr\btr0cur.c line 443 for 118.00 seconds the sema phore: S-lock on RW-latch at 09D6453C created in file .\buf\buf0buf.c line 550 a writer (thread id 1824) has reserved it in mode wait exclusive number of readers 1, waiters flag 1 Last time read locked in file .\buf\buf0flu.c line 599 Last time write locked in file .\btr\btr0cur.c line 443 Mutex spin waits 0, rounds 527817, OS waits 7133 RW-shared spins 2532, OS waits 1226; RW-excl spins 1652, OS waits 1118 ------------ TRANSACTIONS ------------ Trx id counter 0 95830 Purge done for trx's n:o < 0 95814 undo n:o < 0 0 History list length 11 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, OS thread id 3704 MySQL thread id 551, query id 2702112 localhost 127.0.0.1 root show innodb status ---TRANSACTION 0 95829, not started, OS thread id 3132 MySQL thread id 534, query id 2702020 localhost 127.0.0.1 root ---TRANSACTION 0 95828, not started, OS thread id 3152 MySQL thread id 527, query id 2701973 localhost 127.0.0.1 root ---TRANSACTION 0 95827, ACTIVE 118 sec, OS thread id 1824 inserting, thread decl ared inside InnoDB 500 mysql tables in use 1, locked 1 1 lock struct(s), heap size 320, 0 row lock(s) MySQL thread id 526, query id 2701972 localhost 127.0.0.1 root update INSERT INTO log_searchcriteria (userid,search_criteria,date,search_type) VALUES ( NAME_CONST('userid',NULL), NAME_CONST('search_criteria',_latin1' SELECT SQL_C ALC_FOUND_ROWS idx_search.CTCX_LATITUDE, idx_search.CTCX_LONGITUDE, idx_search.b uilding_id, idx_search.LN_LIST_NUMBER, idx_search.LP_LIST_PRICE, idx_search.HSN_ ADRESS_HOUSE_NUMBER, idx_search.STR_ADDRESS_STREET, idx_search.CP_ADDRESS_COMPAS S_POINT, idx_search.UN_UNIT, idx_search.CIT_CITY, idx_search.ZP_ZIP_CODE, idx_se arch.AR_AREA_NAME, idx_search.BR_BEDROOMS, idx_search.BTH_BATHS, idx_search.ST_S TATUS, idx_search.CTCX_STYLE_TYPE, idx_s -------- FILE I/O -------- I/O thread 0 state: wait Windows aio (insert buffer thread) I/O thread 1 state: wait Windows aio (log thread) I/O thread 2 state: wait Windows aio (read thread) I/O thread 3 state: wait Windows aio (write thread) Pending normal aio reads: 0, aio writes: 1, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 151006 OS file reads, 120758 OS file writes, 6844 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 5, seg size 7, 24664 inserts, 24664 merged recs, 4612 merges Hash table size 553253, node heap has 629 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 5 2318193115 Log flushed up to 5 2318193115 Last checkpoint at 5 2318129891 0 pending log writes, 0 pending chkp writes 3036 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 213459462; in additional pool allocated 1720192 Dictionary memory allocated 240416 Buffer pool size 8192 Free buffers 0 Database pages 7563 Modified db pages 18 Pending reads 0 Pending writes: LRU 0, flush list 18, single page 0 Pages read 150973, created 28788, written 115137 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout -------------- ROW OPERATIONS -------------- 1 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread id 2992, state: flushing buffer pool pages Number of rows inserted 794294, updated 89203, deleted 13698, read 1453084305 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ Thanks

    Read the article

  • nvidia segfault crashes XServer (12.04 fresh install)

    - by Sébastien GILLES
    I am on a fresh install of 12.04, and my video card is a Quadro FX 570, which appears to be supported (see output of unity_support_test below). But my Xserver crashes randomly and causes my session to just shutdown and bring me back to the logging screen. This happens several times per hour. After checking syslog it that a segfault in the nvidia driver is the cause of the problem: Jun 13 11:14:17 lima kernel: [86569.828982] Xorg[17940]: segfault at ffebeb69 ip b4c8f7aa sp bf8076dc error 4 in nvidia_drv.so[b47a7000+706000] Jun 13 11:14:36 lima gnome-session[18119]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :3.#012 The funny thing is that as I was reporting this bug, my xserver crashed again (!) and this time I got another error message: Jun 13 11:29:39 lima kernel: [87491.106441] NVRM: Xid (0000:02:00): 6, PE0001 Jun 13 11:29:39 lima gnome-session[26493]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :4.#012 Any idea as to what can be the problem given that i am on a fresh install with a supported video card ? Sébastien == Output of unity_support_test $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 570/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes

    Read the article

  • iptables rule to submit packets matching a specific negative rule

    - by Aditya Sehgal
    I am using netfilter_queue to pick up certain packets from the kernel and do some processing on them. To, the netfilter queue, I need all packets from a particular source except UDP packets with src port 2152 & dst port 2152. I try to add the iptable rule as iptables -A OUTPUT ! s 192.168.0.3 ! -p udp ! --sport 2905 ! --dport 2905 -j NFQUEUE --queue-num 0 iptables throw up an error of Invalid Argument. Querying dmesg, I see the following error print ip_tables: udp match: only valid for protocol 17 I have tried the following variation with the same error thrown. iptables -A OUTPUT ! s 192.168.0.3 ! -p udp --sport 2905 --dport 2905 -j NFQUEUE --queue-num 0 Can you please advise on the correct usage of the iptables command for my case.

    Read the article

  • Why doesn't lsof show localhost TCP connections in 14.04?

    - by sfussenegger
    I have two servers running 12.04.4 and 14.04.1 respectively. Both have nginx (port 80) and a Java process (port 8080). As expected, the lsof output for the Java process on the 12.04 machine shows a couple of established connections for port 8080 (e.g. TCP 127.0.0.1:8080->127.0.0.1:58067 (ESTABLISHED)) The 14.04 machine however does not. It only shows the listening port (TCP *:8080 (LISTEN)). I'm sure there are active connections though (confirmed by access logs, Java process status output, etc). What has changed from 12.04 to result in this behavior? Can this change be the cause for the "Too many open files" errors I'm getting since moving from 12.04 to 14.04? 12.04: $ dpkg -l lsof linux-image-virtual openjdk-7-jre nginx ||/ Name Version +++-===========================================-=========================================== ii linux-image-virtual 3.2.0.59.70 ii lsof 4.81.dfsg.1-1build1 ii nginx 1.6.1-1~precise ii openjdk-7-jre 7u65-2.5.1-4ubuntu1~0.12.04.1 14.04: $ dpkg -l lsof linux-image-virtual openjdk-7-jre nginx-full ||/ Name Version Architecture Description +++-=====================================-=======================-======================= ii linux-image-virtual 3.13.0.32.38 amd64 ii lsof 4.86+dfsg-1ubuntu2 amd64 ii nginx-full 1.4.6-1ubuntu3 amd64 ii openjdk-7-jre:amd64 7u65-2.5.1-4ubuntu1~0.1 amd64

    Read the article

  • Search SSIS packages for table/column references

    - by Nigel Rivett
    A lot of companies now use TFS or some other system and keep all their packages in a single project. This means that a copy of all the packages will end up on your local disk. There is major failing with SSIS that it is sometimes quite difficult to find what a package is actually doing, what it accesses and what it affects. This is a simple dos script which will search through all packages in a folder for a string and write the names of found packages to an output file. Just copy the text to a .bat file (I use aaSearch.bat) in the folder with all the package scripts Change the output filename (twice), change the find string value and run it in a dos window. It works on any text file type so you can also search store procedure scripts – but there are easier ways of doing that. echo. > aaSearch_factSales.txt for /f “delims=” %%a in (‘dir /B /s *.dtsx’) do call :subr “%%a” goto:EOF :subr findstr “factSales” %1 if %ERRORLEVEL% NEQ 1 echo %1 >> aaSearch_factSales.txt goto:EOF

    Read the article

  • nVidia Control Panel Won't Recognize SLI

    - by Nakaan
    So yesterday I bought a brand new, 1,000W PSU to replace my 650W one and to allow for SLI. I install it and my second card (both are GTX 560 ti cards). I reinstalled my drivers and my system recognizes both cards. The control panel says "GTX 560 ti x2", I can select between them for Physx, sound output, picture output (although I only have one hooked up to my monitor), etc. But the kicker is I can't turn on SLI. Everything I've read says I'll get a balloon notification saying I can use SLI and the control panel will have a new section, etc, but none of those things happens. Anyone have any ideas? System: Win7 Professional x64 2x GTX 560 ti 3.1 GHz Intel Core i5 1,000W Xion PSU 8GB RAM (Can't think of my motherboard right now) Note: My PSU and MOBO both say they're SLI certified and I'm using an SLI bridge. Edit: Formatting changes

    Read the article

  • What is the correct way to restart udev in Ubuntu?

    - by zerkms
    I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

    Read the article

  • arm-none-ebai-gcc does not work from mounted directory

    - by dmytro_lviv
    I want to build project for ARM micro controller. For this purpose in folder with project was placed script, which download toolchain and build him. After run this script toolchain was placed in folder with project. Folder with project placed on another logical disk (which shared between Win and Linux) and this disk is mounting each time when I start develop. (Mount by hand). When I start make, in terminal I receive error: make[3]: arm-none-eabi-gcc: Command not found The output from echo $PATH: /mnt/Smoothie-master/gcc-arm-none-eabi/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games The output from whereis arm-none-ebai-gcc: arm-none-ebai-gcc: All binaries files, which are relating to this toolchain are placed in the next directory: /mnt/Smoothie-master/gcc-arm-none-eabi/bin/ and has permissions: "-rwxrwxrwx" Before building this toolchain, I had another similar toolchain (another version of this), but installed through apt-get. And it was removed through apt-get before building new. Where is the problem? Thanks!

    Read the article

  • Cron: job starts but doesn't complete

    - by Guandalino
    I have a problem with a cron job which starts but doesn't complete. Running the command manually works fine. I already read the page about cron issues and solutions here on AskUbuntu, tried the proposed solutions but didn't find an answer working in my case. I'm using Ubuntu 12.04. $ crontab -e SHELL=/bin/bash # otherwise it would be /bin/sh 59 16 * * * /bin/duply calendar backup > /tmp/duply.log Btw, the cron file ends with an empty line, as someone pointed out. Once the job has "finished"...: $ cat /tmp/duply.log Start duply v1.5.7, time is 2012-06-22 16:59:01. Instead, running manually the script it works correctly and gives this output: Start duply v1.5.7, time is 2012-06-22 17:06:39. [cut] ... here is a long output generated by duply. ... and yes, files have been backed up. [cut] --- Finished state OK at 17:06:42.581 - Runtime 00:00:03.170 --- I also tried to restart the cron daemon (sudo service cron restart) but nothing changed. Do you have any suggestion to fix the issue?

    Read the article

  • Double vs Single Quotes in Chrome

    - by Rodrigo
    So when you want to embed google docs on a site you are given this chunk of code: <iframe width='500' height='300' frameborder='0' src='https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AiV6Vq32hBZIdHZRN3EwWERLZHVUT25ST01LTGxubWc&output=html&widget=true'></iframe> This works fine on my site. If you edit the page, we run the new content through some filters to escape out stuff and make sure it is valid html. After the process, the link above gets converted to this: <iframe frameborder="0" height="300" src="https://docs.google.com/spreadsheet/pub?hl=en_US&amp;hl=en_US&amp;key=0AiV6Vq32hBZIdHZRN3EwWERLZHVUT25ST01LTGxubWc&amp;output=html&amp;widget=true" width="500"></iframe> This will work on every browser except for chrome. Chrome thinks I am running JS in the src. I narrowed it down to a combination of double quotes and escaped '&' symbols. If i revert one of those back to the original state, the iframe works. I work in ruby where ' and " have different behaviors. Is Chrome doing the same thing? Is there a way to turn that off?

    Read the article

  • Linear Search in Python? [closed]

    - by POTUS
    def find_interval(mesh,x): '''This function finds the interval containing x according to the following rules, mesh is an ordered list with n numbers return 0 if x < mesh[0] return n if mesh[n-1] < x return k if mesh[k-1] <= x < mesh[k] return n-1 if mesh[n-2] <= x <= mesh[n-1] This function does a Linear search. 08/29/2012 ''' for n in range(len(mesh)): for k in range(len(mesh)): if x == mesh[n]: print "Found x at index:" return n elif x<mesh[n]: return 0 elif mesh[n-1]<x: return n elif mesh[n-2]<=x<=mesh[n-1]: return n-1 elif mesh[k-1]<=x<mesh[k]: return k mesh = [0, 0.1, 0.25, 0.5, 0.6, 0.75, 0.9, 1] print mesh print find_interval(mesh, -1) print find_interval(mesh, 0) print find_interval(mesh, 0.1) print find_interval(mesh, 0.8) print find_interval(mesh, 0.9) print find_interval(mesh, 1) print find_interval(mesh, 1.01) Output: [0, 0.100000000000000, 0.250000000000000, 0.500000000000000, 0.600000000000000, 0.750000000000000, 0.900000000000000, 1] 0 Found x at index: 0 2 6 -1 -1 0 I don't think the output is correct. Can anyone help me fix it? Thanks.

    Read the article

  • Using optimization to assign by preference

    - by Aarthi
    I have 100 objects ("candies") that I need to distribute between five people so that each has an equal number of candies (in this case, 20 candies per person). However, each person has also expressed their preferences of candy to me in a chart, similar to below. Top-favored candies receive 10 points, least-favored candies receive -10 points, and neutral-favored candies receive 0.5 points. I need to sort the items out so that: Each person receives the same number of candies Each person's total "satisfaction" (points) is maximized My output is a list of each person's assigned items I'm familiar with Excel's in-house Monte Carlo simulation tools (Solver, F9 diceroll, etc) and would like to stick to those tools. While I know how to set up the chart, and how to use the column summation to input into Solver, I don't know how to get it to give me the desired output. Furthermore, how do I adjust the solver so it takes into account individual preferences rather than empirical ones? To wit: how do I begin setting up this model?

    Read the article

  • Linux WD30EZRX WD Green HDD & Blacx Duet 5G Usb

    - by Adam
    I have connected up an WD30EZRX WD Green HDD to a Thermaltake Blacx Duet 5G USB dock in Ubuntu 12.04. Every thing seems fine except when the HDD idles it seems to have error ls: reading directory .: Input/output error after a while and is only fixed by unmounting and remounting the drive as root. I have the following line in /etc/fstab UUID=AAF670E9F670B6E3 /media/3TB ntfs defaults,user,auto 0 0 I have noticed that it seems to go between /dev/sdc2 and /dev/sdd2 devices on remount. I did copy 1TB last night without issue in 1 sitting. But after x mins of idle it has remount issue. Any tips/suggestions on how to proceed would be appreciated. Spent most of the night googling and all its done is made me sad. Edit (tried as suggested): root@mediaserver:/media/3TB# sudo hdparm -B 255 -S 253 /dev/sdd2 /dev/sdd2: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error setting standby to 253 (vendor-specific) APM_level = not supported Seems as if that didn't help with this particular drive.

    Read the article

  • What's wrong with my ext4 partition?

    - by bumbling fool
    What is wrong with this picture? Top is output from "df -h", bottom is gparted. I suspect I'm missing a lot of free space. No problems other than that (yet). Can somebody suggest the best (non-destructive) way to correct this? sudo dumpe2fs -h /dev/sda3: (source http://pastebin.com/nAvrdT4E) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 9f6eff64-60d7-4eec-81d5-1e8acd818b38 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 1602496 Block count: 6406144 Reserved block count: 320306 Free blocks: 4842284 Free inodes: 1361222 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 1022 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8176 Inode blocks per group: 511 RAID stride: 32692 Flex block group size: 16 Filesystem created: Sun Nov 8 18:18:13 2009 Last mount time: Tue Mar 1 01:04:27 2011 Last write time: Mon Feb 28 04:27:34 2011 Mount count: 16 Maximum mount count: 28 Last checked: Thu Feb 24 06:23:39 2011 Check interval: 15552000 (6 months) Next check after: Tue Aug 23 07:23:39 2011 Lifetime writes: 227 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 268015 Default directory hash: half_md4 Directory Hash Seed: cc101517-e617-482b-a883-a72919419c84 Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x001d3000 Journal start: 7787 fdisk and parted output per requests: http://pastebin.com/EGVH7Ken

    Read the article

  • Laptop battery life drastically decreased compared to Windows 7

    - by Aron Rotteveel
    I am running Ubuntu 10.10 on my Dell Studio XPS 1640 and have about one hour of battery life in it, compared to about 2.5 hours running on Windows 7. This is with wireless and bluetooth on, but still, the difference seems incredible. What could be causing such a difference and is there a way to close the gap without losing core functionality? EDIT: here's some output from powertop. This is with bluetooth turned off and Wifi turned on. The output seems pretty normal to me, but as indicated, this is about 1 hour of battery life on a full battery... Wakeups-from-idle per second : 476.2 interval: 10.0s Power usage (ACPI estimate): 2.5W (1.2 hours) Top causes for wakeups: 30.0% (167.2)D chrome 21.0% (117.3) [extra timer interrupt] 13.9% ( 77.4) [kernel scheduler] Load balancing tick 3.4% ( 18.9)D xchat 7.1% ( 39.8) [iwlagn] <interrupt> 5.9% ( 32.9) AptanaStudio3 3.9% ( 21.6)D java 2.7% ( 14.9) [TLB shootdowns] <kernel IPI> 2.5% ( 14.1) docky 1.8% ( 10.0) nautilus 1.6% ( 9.0) thunderbird-bin 1.0% ( 5.5) [ahci] <interrupt> 0.9% ( 5.0) syndaemon 0.8% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer) EDIT: after changing /proc/sys/vm/laptop_mode to 5 (it was set to 0), wakeups seem to have decreased, although usage still seems far too high: Wakeups-from-idle per second : 263.8 interval: 10.0s Power usage (ACPI estimate): 2.6W (0.9 hours) EDIT: I seem to have discovered the main cause: I was using the open source ATI Drivers. I recently installed the official ATI drivers and laptop battery life seems to have doubled since. EDIT: last edit. The previous 'solution' of installing the official ATI drivers turns out to be a non-solution. Although it does increase battery life, my laptop resolution is maxed out at 1200x800 after a reboot. (Please note that this problem does not need answering in this question as it is a seperate case)

    Read the article

  • How to install pecl uploadprogress on Debian Lenny

    - by kidrobot
    I am getting this output/error for # pecl install uploadprogress downloading uploadprogress-1.0.1.tgz ... Starting to download uploadprogress-1.0.1.tgz (8,536 bytes) .....done: 8,536 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 building in /var/tmp/pear-build-root/uploadprogress-1.0.1 running: /tmp/pear/temp/uploadprogress/configure checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. ERROR: `/tmp/pear/temp/uploadprogress/configure' failed php-pear is installed. I'm stumped.

    Read the article

  • ubuntu box just redisplaying login screen after update

    - by David M. Karr
    My Ubuntu 12.04 box has been working fine. A recent update may have messed something up. I normally run remote windows on it, and I noticed that my windows were failing to start up. I then tried logging into it directly from the GUI console, and I'm seeing that after I press enter on the (valid) password, the page just redisplays. It's not a password error, as that would give me an inline error. I see some messages appear and disappear quickly between the login screen going away and then redisplaying, but they go away too quickly to read. I was able to run the non-gui login, and I did an update and upgrade, and then rebooted, but it's doing the same thing. I have a Samba connection from my Windows box, and that's still working. If it matters, here's my uname output (somewhat elided): Linux ... 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux What can I do to troubleshoot this? Note that when I select "Guest Session", it lets me log in and displays the window manager. This seems significant to me. Does this mean that something specific to my login is causing it to fail? Note: If it matters, here's the output from /var/log/dmesg. The line about gdm seems interesting: [ 9.815883] Bluetooth: RFCOMM TTY layer initialized [ 9.815887] Bluetooth: RFCOMM socket layer initialized [ 9.815888] Bluetooth: RFCOMM ver 1.11 [ 9.879088] [PCSPP,TRISTATE] [ 9.879092] parport0: irq 7 detected [ 9.883935] type=1400 audit(1341871177.871:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser" [ 9.884365] type=1400 audit(1341871177.871:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=851 comm="apparmor_parser" [ 9.950397] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 9.961160] init: gdm main process (907) killed by TERM signal [ 9.966358] lp0: using parport0 (polling).

    Read the article

  • Wake laptop when lid is opened?

    - by crackout12
    I have a SAMSUNG laptop, which by the experience in the last months, has been a great one. I am actually implementing some functionality to it, and since I noticed, I am able to wake up my laptop from sleep by just opening the lid on Windows 7, however, I need to press to power button to wake up in Ubuntu. Using a program called i-nex, I noted that the kernel DOES dettect a "lid switch", and I am looking forward to use it to wake up function. Any ideas? UPDATE: Thanks @yossile for bringing up some clues! However, output of command cat /proc/acpi/wakeup does not show the LID device. I still tried the second set of commands you gave me with no effect. Then I tried experimenting, guessing that LID should be named by other value, so I tried enabling the others. No victory so far. But I noticed that devices that did not have any pci listings were disabled at all time no matter what I tried. Here is the output of command cat /proc/acpi/wakeup: root@samsung:~# cat /proc/acpi/wakeup Device S-state Status Sysfs node PCE4 S4 *disabled pci:0000:00:04.0 SBAZ S4 *disabled pci:0000:00:14.2 P0PC S4 *disabled pci:0000:00:14.4 GEC S4 *disabled PE20 S4 *disabled pci:0000:00:15.0 PE21 S4 *disabled PE22 S4 *disabled pci:0000:00:15.2 PE23 S4 *disabled PWRB S5 *enabled So maybe it could be that LID is either GEC,PE21, or PE23? Still, there is /proc/acpi/button/lid/LID/state file which shows that LID is opened. Any more ideas?

    Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >