Search Results

Search found 6517 results on 261 pages for 'reverse dns'.

Page 255/261 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• DBA Best Practices - A Blog Series: Episode 1 - Backups

  - by Argenis

    This blog post is part of the DBA Best Practices series, on which various topics of concern for daily database operations are discussed. Your feedback and comments are very much welcome, so please drop by the comments section and be sure to leave your thoughts on the subject. Morning Coffee When I was a DBA, the first thing I did when I sat down at my desk at work was checking that all backups had completed successfully. It really was more of a ritual, since I had a dual system in place to check for backup completion: 1) the scheduled agent jobs to back up the databases were set to alert the NOC in failure, and 2) I had a script run from a central server every so often to check for any backup failures. Why the redundancy, you might ask. Well, for one I was once bitten by the fact that database mail doesn't work 100% of the time. Potential causes for failure include issues on the SMTP box that relays your server email, firewall problems, DNS issues, etc. And so to be sure that my backups completed fine, I needed to rely on a mechanism other than having the servers do the taking - I needed to interrogate the servers and ask each one if an issue had occurred. This is why I had a script run every so often. Some of you might have monitoring tools in place like Microsoft System Center Operations Manager (SCOM) or similar 3rd party products that would track all these things for you. But at that moment, we had no resort but to write our own Powershell scripts to do it. Now it goes without saying that if you don't have backups in place, you might as well find another career. Your most sacred job as a DBA is to protect the data from a disaster, and only properly safeguarded backups can offer you peace of mind here. "But, we have a cluster...we don't need backups" Sadly I've heard this line more than I would have liked to. You need to understand that a cluster is comprised of shared storage, and that is precisely your single point of failure. A cluster will protect you from an issue at the Operating System level, and also under an outage of any SQL-related service or dependent devices. But it will most definitely NOT protect you against corruption, nor will it protect you against somebody deleting data from a table - accidentally or otherwise. Backup, fine. How often do I take a backup? The answer to this is something you will hear frequently when working with databases: it depends. What does it depend on? For one, you need to understand how much data your business is willing to lose. This is what's called Recovery Point Objective, or RPO. If you don't know how much data your business is willing to lose, you need to have an honest and realistic conversation about data loss expectations with your customers, internal or external. From my experience, their first answer to the question "how much data loss can you withstand?" will be "zero". In that case, you will need to explain how zero data loss is very difficult and very costly to achieve, even in today's computing environments. Do you want to go ahead and take full backups of all your databases every hour, or even every day? Probably not, because of the impact that taking a full backup can have on a system. That's what differential and transaction log backups are for. Have I answered the question of how often to take a backup? No, and I did that on purpose. You need to think about how much time you have to recover from any event that requires you to restore your databases. This is what's called Recovery Time Objective. Again, if you go ask your customer how long of an outage they can withstand, at first you will get a completely unrealistic number - and that will be your starting point for discussing a solution that is cost effective. The point that I'm trying to get across is that you need to have a plan. This plan needs to be practiced, and tested. Like a football playbook, you need to rehearse the moves you'll perform when the time comes. How often is up to you, and the objective is that you feel better about yourself and the steps you need to follow when emergency strikes. A backup is nothing more than an untested restore Backups are files. Files are prone to corruption. Put those two together and realize how you feel about those backups sitting on that network drive. When was the last time you restored any of those? Restoring your backups on another box - that, by the way, doesn't have to match the specs of your production server - will give you two things: 1) peace of mind, because now you know that your backups are good and 2) a place to offload your consistency checks with DBCC CHECKDB or any of the other DBCC commands like CHECKTABLE or CHECKCATALOG. This is a great strategy for VLDBs that cannot withstand the additional load created by the consistency checks. If you choose to offload your consistency checks to another server though, be sure to run DBCC CHECKDB WITH PHYSICALONLY on the production server, and if you're using SQL Server 2008 R2 SP1 CU4 and above, be sure to enable traceflags 2562 and/or 2549, which will speed up the PHYSICALONLY checks further - you can read more about this enhancement here. Back to the "How Often" question for a second. If you have the disk, and the network latency, and the system resources to do so, why not backup the transaction log often? As in, every 5 minutes, or even less than that? There's not much downside to doing it, as you will have to clear the log with a backup sooner than later, lest you risk running out space on your tlog, or even your drive. The one drawback to this approach is that you will have more files to deal with at restore time, and processing each file will add a bit of extra time to the entire process. But it might be worth that time knowing that you minimized the amount of data lost. Again, test your plan to make sure that it matches your particular needs. Where to back up to? Network share? Locally? SAN volume? This is another topic where everybody has a favorite choice. So, I'll stick to mentioning what I like to do and what I consider to be the best practice in this regard. I like to backup to a SAN volume, i.e., a drive that actually lives in the SAN, and can be easily attached to another server in a pinch, saving you valuable time - you wouldn't need to restore files on the network (slow) or pull out drives out a dead server (been there, done that, it’s also slow!). The key is to have a copy of those backup files made quickly, and, if at all possible, to a remote target on a different datacenter - or even the cloud. There are plenty of solutions out there that can help you put such a solution together. That right there is the first step towards a practical Disaster Recovery plan. But there's much more to DR, and that's material for a different blog post in this series.

  Read the article

• Building Queries Systematically

  - by Jeremy Smyth

  The SQL language is a bit like a toolkit for data. It consists of lots of little fiddly bits of syntax that, taken together, allow you to build complex edifices and return powerful results. For the uninitiated, the many tools can be quite confusing, and it's sometimes difficult to decide how to go about the process of building non-trivial queries, that is, queries that are more than a simple SELECT a, b FROM c; A System for Building Queries When you're building queries, you could use a system like the following:  Decide which fields contain the values you want to use in our output, and how you wish to alias those fields Values you want to see in your output Values you want to use in calculations . For example, to calculate margin on a product, you could calculate price - cost and give it the alias margin. Values you want to filter with. For example, you might only want to see products that weigh more than 2Kg or that are blue. The weight or colour columns could contain that information. Values you want to order by. For example you might want the most expensive products first, and the least last. You could use the price column in descending order to achieve that. Assuming the fields you've picked in point 1 are in multiple tables, find the connections between those tables Look for relationships between tables and identify the columns that implement those relationships. For example, The Orders table could have a CustomerID field referencing the same column in the Customers table. Sometimes the problem doesn't use relationships but rests on a different field; sometimes the query is looking for a coincidence of fact rather than a foreign key constraint. For example you might have sales representatives who live in the same state as a customer; this information is normally not used in relationships, but if your query is for organizing events where sales representatives meet customers, it's useful in that query. In such a case you would record the names of columns at either end of such a connection. Sometimes relationships require a bridge, a junction table that wasn't identified in point 1 above but is needed to connect tables you need; these are used in "many-to-many relationships". In these cases you need to record the columns in each table that connect to similar columns in other tables. Construct a join or series of joins using the fields and tables identified in point 2 above. This becomes your FROM clause. Filter using some of the fields in point 1 above. This becomes your WHERE clause. Construct an ORDER BY clause using values from point 1 above that are relevant to the desired order of the output rows. Project the result using the remainder of the fields in point 1 above. This becomes your SELECT clause. A Worked Example   Let's say you want to query the world database to find a list of countries (with their capitals) and the change in GNP, using the difference between the GNP and GNPOld columns, and that you only want to see results for countries with a population greater than 100,000,000. Using the system described above, we could do the following:  The Country.Name and City.Name columns contain the name of the country and city respectively.  The change in GNP comes from the calculation GNP - GNPOld. Both those columns are in the Country table. This calculation is also used to order the output, in descending order To see only countries with a population greater than 100,000,000, you need the Population field of the Country table. There is also a Population field in the City table, so you'll need to specify the table name to disambiguate. You can also represent a number like 100 million as 100e6 instead of 100000000 to make it easier to read. Because the fields come from the Country and City tables, you'll need to join them. There are two relationships between these tables: Each city is hosted within a country, and the city's CountryCode column identifies that country. Also, each country has a capital city, whose ID is contained within the country's Capital column. This latter relationship is the one to use, so the relevant columns and the condition that uses them is represented by the following FROM clause:  FROM Country JOIN City ON Country.Capital = City.ID The statement should only return countries with a population greater than 100,000,000. Country.Population is the relevant column, so the WHERE clause becomes:  WHERE Country.Population > 100e6  To sort the result set in reverse order of difference in GNP, you could use either the calculation, or the position in the output (it's the third column): ORDER BY GNP - GNPOld or ORDER BY 3 Finally, project the columns you wish to see by constructing the SELECT clause: SELECT Country.Name AS Country, City.Name AS Capital,        GNP - GNPOld AS `Difference in GNP`  The whole statement ends up looking like this:  mysql> SELECT Country.Name AS Country, City.Name AS Capital, -> GNP - GNPOld AS `Difference in GNP` -> FROM Country JOIN City ON Country.Capital = City.ID -> WHERE Country.Population > 100e6 -> ORDER BY 3 DESC; +--------------------+------------+-------------------+ | Country            | Capital    | Difference in GNP | +--------------------+------------+-------------------+ | United States | Washington | 399800.00 | | China | Peking | 64549.00 | | India | New Delhi | 16542.00 | | Nigeria | Abuja | 7084.00 | | Pakistan | Islamabad | 2740.00 | | Bangladesh | Dhaka | 886.00 | | Brazil | Brasília | -27369.00 | | Indonesia | Jakarta | -130020.00 | | Russian Federation | Moscow | -166381.00 | | Japan | Tokyo | -405596.00 | +--------------------+------------+-------------------+ 10 rows in set (0.00 sec) Queries with Aggregates and GROUP BY While this system might work well for many queries, it doesn't cater for situations where you have complex summaries and aggregation. For aggregation, you'd start with choosing which columns to view in the output, but this time you'd construct them as aggregate expressions. For example, you could look at the average population, or the count of distinct regions.You could also perform more complex aggregations, such as the average of GNP per head of population calculated as AVG(GNP/Population). Having chosen the values to appear in the output, you must choose how to aggregate those values. A useful way to think about this is that every aggregate query is of the form X, Y per Z. The SELECT clause contains the expressions for X and Y, as already described, and Z becomes your GROUP BY clause. Ordinarily you would also include Z in the query so you see how you are grouping, so the output becomes Z, X, Y per Z.  As an example, consider the following, which shows a count of  countries and the average population per continent:  mysql> SELECT Continent, COUNT(Name), AVG(Population)     -> FROM Country     -> GROUP BY Continent; +---------------+-------------+-----------------+ | Continent     | COUNT(Name) | AVG(Population) | +---------------+-------------+-----------------+ | Asia          |          51 |   72647562.7451 | | Europe        |          46 |   15871186.9565 | | North America |          37 |   13053864.8649 | | Africa        |          58 |   13525431.0345 | | Oceania       |          28 |    1085755.3571 | | Antarctica    |           5 |          0.0000 | | South America |          14 |   24698571.4286 | +---------------+-------------+-----------------+ 7 rows in set (0.00 sec) In this case, X is the number of countries, Y is the average population, and Z is the continent. Of course, you could have more fields in the SELECT clause, and  more fields in the GROUP BY clause as you require. You would also normally alias columns to make the output more suited to your requirements. More Complex Queries  Queries can get considerably more interesting than this. You could also add joins and other expressions to your aggregate query, as in the earlier part of this post. You could have more complex conditions in the WHERE clause. Similarly, you could use queries such as these in subqueries of yet more complex super-queries. Each technique becomes another tool in your toolbox, until before you know it you're writing queries across 15 tables that take two pages to write out. But that's for another day...

  Read the article

• DBA Best Practices - A Blog Series: Episode 1 - Backups

  - by Argenis

    This blog post is part of the DBA Best Practices series, on which various topics of concern for daily database operations are discussed. Your feedback and comments are very much welcome, so please drop by the comments section and be sure to leave your thoughts on the subject. Morning Coffee When I was a DBA, the first thing I did when I sat down at my desk at work was checking that all backups have completed successfully. It really was more of a ritual, since I had a dual system in place to check for backup completion: 1) the scheduled agent jobs to back up the databases were set to alert the NOC in failure, and 2) I had a script run from a central server every so often to check for any backup failures. Why the redundancy, you might ask. Well, for one I was once bitten by the fact that database mail doesn't work 100% of the time. Potential causes for failure include issues on the SMTP box that relays your server email, firewall problems, DNS issues, etc. And so to be sure that my backups completed fine, I needed to rely on a mechanism other than having the servers do the taking - I needed to interrogate the servers and ask each one if an issue had occurred. This is why I had a script run every so often. Some of you might have monitoring tools in place like Microsoft System Center Operations Manager (SCOM) or similar 3rd party products that would track all these things for you. But at that moment, we had no resort but to write our own Powershell scripts to do it. Now it goes without saying that if you don't have backups in place, you might as well find another career. Your most sacred job as a DBA is to protect the data from a disaster, and only properly safeguarded backups can offer you peace of mind here. "But, we have a cluster...we don't need backups" Sadly I've heard this line more than I would have liked to. You need to understand that a cluster is comprised of shared storage, and that is precisely your single point of failure. A cluster will protect you from an issue at the Operating System level, and also under an outage of any SQL-related service or dependent devices. But it will most definitely NOT protect you against corruption, nor will it protect you against somebody deleting data from a table - accidentally or otherwise. Backup, fine. How often do I take a backup? The answer to this is something you will hear frequently when working with databases: it depends. What does it depend on? For one, you need to understand how much data your business is willing to lose. This is what's called Recovery Point Objective, or RPO. If you don't know how much data your business is willing to lose, you need to have an honest and realistic conversation about data loss expectations with your customers, internal or external. From my experience, their first answer to the question "how much data loss can you withstand?" will be "zero". In that case, you will need to explain how zero data loss is very difficult and very costly to achieve, even in today's computing environments. Do you want to go ahead and take full backups of all your databases every hour, or even every day? Probably not, because of the impact that taking a full backup can have on a system. That's what differential and transaction log backups are for. Have I answered the question of how often to take a backup? No, and I did that on purpose. You need to think about how much time you have to recover from any event that requires you to restore your databases. This is what's called Recovery Time Objective. Again, if you go ask your customer how long of an outage they can withstand, at first you will get a completely unrealistic number - and that will be your starting point for discussing a solution that is cost effective. The point that I'm trying to get across is that you need to have a plan. This plan needs to be practiced, and tested. Like a football playbook, you need to rehearse the moves you'll perform when the time comes. How often is up to you, and the objective is that you feel better about yourself and the steps you need to follow when emergency strikes. A backup is nothing more than an untested restore Backups are files. Files are prone to corruption. Put those two together and realize how you feel about those backups sitting on that network drive. When was the last time you restored any of those? Restoring your backups on another box - that, by the way, doesn't have to match the specs of your production server - will give you two things: 1) peace of mind, because now you know that your backups are good and 2) a place to offload your consistency checks with DBCC CHECKDB or any of the other DBCC commands like CHECKTABLE or CHECKCATALOG. This is a great strategy for VLDBs that cannot withstand the additional load created by the consistency checks. If you choose to offload your consistency checks to another server though, be sure to run DBCC CHECKDB WITH PHYSICALONLY on the production server, and if you're using SQL Server 2008 R2 SP1 CU4 and above, be sure to enable traceflags 2562 and/or 2549, which will speed up the PHYSICALONLY checks further - you can read more about this enhancement here. Back to the "How Often" question for a second. If you have the disk, and the network latency, and the system resources to do so, why not backup the transaction log often? As in, every 5 minutes, or even less than that? There's not much downside to doing it, as you will have to clear the log with a backup sooner than later, lest you risk running out space on your tlog, or even your drive. The one drawback to this approach is that you will have more files to deal with at restore time, and processing each file will add a bit of extra time to the entire process. But it might be worth that time knowing that you minimized the amount of data lost. Again, test your plan to make sure that it matches your particular needs. Where to back up to? Network share? Locally? SAN volume? This is another topic where everybody has a favorite choice. So, I'll stick to mentioning what I like to do and what I consider to be the best practice in this regard. I like to backup to a SAN volume, i.e., a drive that actually lives in the SAN, and can be easily attached to another server in a pinch, saving you valuable time - you wouldn't need to restore files on the network (slow) or pull out drives out a dead server (been there, done that, it’s also slow!). The key is to have a copy of those backup files made quickly, and, if at all possible, to a remote target on a different datacenter - or even the cloud. There are plenty of solutions out there that can help you put such a solution together. That right there is the first step towards a practical Disaster Recovery plan. But there's much more to DR, and that's material for a different blog post in this series.

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

• Of transactions and Mongo

  - by Nuri Halperin

  Originally posted on: http://geekswithblogs.net/nuri/archive/2014/05/20/of-transactions-and-mongo-again.aspxWhat's the first thing you hear about NoSQL databases? That they lose your data? That there's no transactions? No joins? No hope for "real" applications? Well, you *should* be wondering whether a certain of database is the right one for your job. But if you do so, you should be wondering that about "traditional" databases as well! In the spirit of exploration let's take a look at a common challenge: You are a bank. You have customers with accounts. Customer A wants to pay B. You want to allow that only if A can cover the amount being transferred. Let's looks at the problem without any context of any database engine in mind. What would you do? How would you ensure that the amount transfer is done "properly"? Would you prevent a "transaction" from taking place unless A can cover the amount? There are several options: Prevent any change to A's account while the transfer is taking place. That boils down to locking. Apply the change, and allow A's balance to go below zero. Charge person A some interest on the negative balance. Not friendly, but certainly a choice. Don't do either. Options 1 and 2 are difficult to attain in the NoSQL world. Mongo won't save you headaches here either. Option 3 looks a bit harsh. But here's where this can go: ledger. See, and account doesn't need to be represented by a single row in a table of all accounts with only the current balance on it. More often than not, accounting systems use ledgers. And entries in ledgers - as it turns out – don't actually get updated. Once a ledger entry is written, it is not removed or altered. A transaction is represented by an entry in the ledger stating and amount withdrawn from A's account and an entry in the ledger stating an addition of said amount to B's account. For sake of space-saving, that entry in the ledger can happen using one entry. Think {Timestamp, FromAccountId, ToAccountId, Amount}. The implication of the original question – "how do you enforce non-negative balance rule" then boils down to: Insert entry in ledger Run validation of recent entries Insert reverse entry to roll back transaction if validation failed. What is validation? Sum up the transactions that A's account has (all deposits and debits), and ensure the balance is positive. For sake of efficiency, one can roll up transactions and "close the book" on transactions with a pseudo entry stating balance as of midnight or something. This lets you avoid doing math on the fly on too many transactions. You simply run from the latest "approved balance" marker to date. But that's an optimization, and premature optimizations are the root of (some? most?) evil.. Back to some nagging questions though: "But mongo is only eventually consistent!" Well, yes, kind of. It's not actually true that Mongo has not transactions. It would be more descriptive to say that Mongo's transaction scope is a single document in a single collection. A write to a Mongo document happens completely or not at all. So although it is true that you can't update more than one documents "at the same time" under a "transaction" umbrella as an atomic update, it is NOT true that there' is no isolation. So a competition between two concurrent updates is completely coherent and the writes will be serialized. They will not scribble on the same document at the same time. In our case - in choosing a ledger approach - we're not even trying to "update" a document, we're simply adding a document to a collection. So there goes the "no transaction" issue. Now let's turn our attention to consistency. What you should know about mongo is that at any given moment, only on member of a replica set is writable. This means that the writable instance in a set of replicated instances always has "the truth". There could be a replication lag such that a reader going to one of the replicas still sees "old" state of a collection or document. But in our ledger case, things fall nicely into place: Run your validation against the writable instance. It is guaranteed to have a ledger either with (after) or without (before) the ledger entry got written. No funky states. Again, the ledger writing *adds* a document, so there's no inconsistent document state to be had either way. Next, we might worry about data loss. Here, mongo offers several write-concerns. Write-concern in Mongo is a mode that marshals how uptight you want the db engine to be about actually persisting a document write to disk before it reports to the application that it is "done". The most volatile, is to say you don't care. In that case, mongo would just accept your write command and say back "thanks" with no guarantee of persistence. If the server loses power at the wrong moment, it may have said "ok" but actually no written the data to disk. That's kind of bad. Don't do that with data you care about. It may be good for votes on a pole regarding how cute a furry animal is, but not so good for business. There are several other write-concerns varying from flushing the write to the disk of the writable instance, flushing to disk on several members of the replica set, a majority of the replica set or all of the members of a replica set. The former choice is the quickest, as no network coordination is required besides the main writable instance. The others impose extra network and time cost. Depending on your tolerance for latency and read-lag, you will face a choice of what works for you. It's really important to understand that no data loss occurs once a document is flushed to an instance. The record is on disk at that point. From that point on, backup strategies and disaster recovery are your worry, not loss of power to the writable machine. This scenario is not different from a relational database at that point. Where does this leave us? Oh, yes. Eventual consistency. By now, we ensured that the "source of truth" instance has the correct data, persisted and coherent. But because of lag, the app may have gone to the writable instance, performed the update and then gone to a replica and looked at the ledger there before the transaction replicated. Here are 2 options to deal with this. Similar to write concerns, mongo support read preferences. An app may choose to read only from the writable instance. This is not an awesome choice to make for every ready, because it just burdens the one instance, and doesn't make use of the other read-only servers. But this choice can be made on a query by query basis. So for the app that our person A is using, we can have person A issue the transfer command to B, and then if that same app is going to immediately as "are we there yet?" we'll query that same writable instance. But B and anyone else in the world can just chill and read from the read-only instance. They have no basis to expect that the ledger has just been written to. So as far as they know, the transaction hasn't happened until they see it appear later. We can further relax the demand by creating application UI that reacts to a write command with "thank you, we will post it shortly" instead of "thank you, we just did everything and here's the new balance". This is a very powerful thing. UI design for highly scalable systems can't insist that the all databases be locked just to paint an "all done" on screen. People understand. They were trained by many online businesses already that your placing of an order does not mean that your product is already outside your door waiting (yes, I know, large retailers are working on it... but were' not there yet). The second thing we can do, is add some artificial delay to a transaction's visibility on the ledger. The way that works is simply adding some logic such that the query against the ledger never nets a transaction for customers newer than say 15 minutes and who's validation flag is not set. This buys us time 2 ways: Replication can catch up to all instances by then, and validation rules can run and determine if this transaction should be "negated" with a compensating transaction. In case we do need to "roll back" the transaction, the backend system can place the timestamp of the compensating transaction at the exact same time or 1ms after the original one. Effectively, once A or B visits their ledger, both transactions would be visible and the overall balance "as of now" would reflect no change.  The 2 transactions (attempted/ reverted) would be visible , since we do actually account for the attempt. Hold on a second. There's a hole in the story: what if several transfers from A to some accounts are registered, and 2 independent validators attempt to compute the balance concurrently? Is there a chance that both would conclude non-sufficient-funds even though rolling back transaction 100 would free up enough for transaction 117 (some random later transaction)? Yes. there is that chance. But the integrity of the business rule is not compromised, since the prime rule is don't dispense money you don't have. To minimize or eliminate this scenario, we can also assign a single validation process per origin account. This may seem non-scalable, but it can easily be done as a "sharded" distribution. Say we have 11 validation threads (or processing nodes etc.). We divide the account number space such that each validator is exclusively responsible for a certain range of account numbers. Sounds cunningly similar to Mongo's sharding strategy, doesn't it? Each validator then works in isolation. More capacity needed? Chop the account space into more chunks. So where  are we now with the nagging questions? "No joins": Huh? What are those for? "No transactions": You mean no cross-collection and no cross-document transactions? Granted - but don't always need them either. "No hope for real applications": well... There are more issues and edge cases to slog through, I'm sure. But hopefully this gives you some ideas of how to solve common problems without distributed locking and relational databases. But then again, you can choose relational databases if they suit your problem.

  Read the article

• CodePlex Daily Summary for Monday, October 22, 2012

  CodePlex Daily Summary for Monday, October 22, 2012Popular ReleasesSQLLib: Alpha release 17: Added CLR UDFs: * clr.fn_regex_instr - similar to Oracle REGEX_INSTR * clr.fn_regex_substr - similar to Oracle REGEX_SUBSTR To deploy CLR objects copy ClrAgg.dll and ClrRegEx.dll to a folder of you choice (currently deployment script points to C:\Program Files\Microsoft SQL Server\100\CLR\ClrAgg.dll) and execute deployment scripts InstallCLRAggregates.sql and InstallCLRRegEx.sql Thank you for rating the download and/or your feedback.EPiServer CMS ElencySolutions.MultipleProperty: ElencySolutions.MultipleProperty v1.6.3: The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London). Installation notes The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below: Embedded: <location path="util/ElencySolutionsMultipleP...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...MCEBuddy 2.x: MCEBuddy 2.3.4: Changelog for 2.3.4 (32bit and 64bit) 1. Fixed a bug introduced in 2.3.3 that would cause HD recordings and recordings with multiple audio channels to fail. 2. Updated <encoder-unsupported> option to compare with all Audio tracks for videos with multiple audio tracks. 3. Fixed a bug with SRT and EDL files, when input and output directory are the same the files are not preserved.BlogEngine.NET: BlogEngine.NET 2.7 RC: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! dot This is a Release Candidate version for BlogEngine.NET 2.7. The most current, stable version of BlogEngine.NET is version 2.6. Find out more about the BlogEngine.NET 2.7 RC here. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions...Pulse: Pulse 0.6.3.0: Fixed a number of bugs that showed up since my update yesterday. Fixes included are for: - Weird issue where the initial "Nature" wallbase.cc search would duplicate itself - After changing a providers settings it wouldn't take affect until you restarted Pulse (removing or adding a provider entirely did take effect though) - Another small issue with the regex for the wallbase.cc wallpapers that I tweaked yesterday, seems good now though.Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsDoctor Reg: Doctor Reg V1.0: Doctor Reg V1.0 PT-PTkv: kv 1.0: if it were any more stable it would be a barn.LINQ for C++: cpplinq-20121020: LINQ for C++ is an attempt to bring LINQ-like list manipulation to C++11. This release includes just the source code. What's new in this release: join range operators: Inner Joins two ranges using a key selector reverse range operator distinct range operator union_with range operator intersect_with range operator except range operator concat range operator sequence_equal range aggregator to_lookup range aggregator This is a sample on how to use cpplinq: #include "cpplinq.h...helferlein_Form: 02.03.05: Requirements.Net 4.0 DotNetNuke 05.06.07 or higher, maybe it works with lower versions, but I developed it on this one and tested it on DotNetNuke 06.02.00 as well helferlein_BabelFish version 01.01.03 - please upgrade this first! Issues fixed Fixed issue with all users from all portals are listed as Host users in the sender options (E-Mail Options - Sender - ALL Users Listed) Registered postback-button for Excel-Export on Form submission edit control Changed behaviour Due to some mis...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.1: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Orchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...New ProjectsAdvanced Systems Generator: A very advanced systems generator in the first phase...planning. Android Phones: Creating Web 2.0 site featuring different types of Android phone where Users and fun of the phones can rate, evaluate and comment on different android phonesAppFabpraisal: AppFabPraisal is a project containing Concept Work around Health Monitoring in AppFabric.ASP.NET Web 2.0 Proje: this is a testAssignment1: This is a simple project allow users to sum two numbersBarryKileyiRobotics: The irobotics websiteBI Loteria: BI de jogos de loteria e lotofacil, para maximizar o numero de acerto em logos desse tipo.BKileyiRoboticsA1: iRobotics BlipiNET: Dostepowa biblioteka .NET do funkcjonalnosci API serwisu Blipi.plCAPRSFinal: Subversion, pruebas unitarias, etc.CityON: l' applicazione fornirà servizi informativi e supporterà l' utente nella pianificazione delle attivitàCryptographer: Cryptographer is a simple encryption/decryption application written in C# WinForms. It allows encryption and decryption using MD5, Rijndael, XOR and Hex.Design Patterns at TUM: Implement and provide the set of design patters in the area of software engineering. DigitalCV: DigitalCV is an API and editor for creating digital curriculum vitaes.Energy Informatics: The idea of this project is to follow a research in the area of energy informatics where we can provide value from the computer science.Ficharts.Net: ??Ficharts?Asp.Net????FlakerNET: Dostepowa biblioteka .NET do funkcjonalnosci API serwisu Flaker.plgillsassignment2: This is my second assignment which has 2 aspx pages.Image Space Occlusion Culling Engine: ISOCE is an Image Space Occlusion Culling Engine optimized to perform occlusion culling in CPU. Developed in C++ using SIMD optimizations.Liubaobao File Manager: A web based file managernetception: netception is an error tracking system aimed at enterprise environments. it aims to build on existing logging projects with business related informationPhoneGap MVC: Demo MVC application using PhoneGapProjetoIntegrador: Projeto Integrador para PUCPR Londrina.Quicklight: The Quicklight project that allows a developer to write anything from Rich Internet Applications to Apps for mobile phones using C# and HTML based Razor viewsRarawel: Crawl website with custom URIs and grab contentSharePoint Online Helper Library: Use .NET code or PowerShell to automate SharePoint Online deployment tasks, such as authenticating without browser, and activate sandbox solutions.SharkCrawler: SharkCrawler is a simple web page crawler written in C# for demonstration of how regular crawler is working.Shin Warrior Players Union: This is a ASP.NET Web 2.0 Project for WSCC coursework.Simple Servers Monitor: Monitor Servers via simple and yet comprehensive interface. Test Hgsubversion: For Testing hgsubversion.Visualizador de escandallos: Visualizador recursivo de estructuras tipo arbol para escandallos de producción.WebscriptingAssignment: sum of two numbersWrapCode - Template: WrapCode.com Custom WordPress template.XMLCatalogueTemplate(C#): MSP????????????????????????????。 ?????????????????。

  Read the article

• Windows Phone 7 : Dragging and flicking UI controls

  - by TechTwaddle

  Who would want to flick and drag UI controls!? There might not be many use cases but I think some concepts here are worthy of a post. So we will create a simple silverlight application for windows phone 7, containing a canvas element on which we’ll place a button control and an image and then, as the title says, drag and flick the controls. Here’s Mainpage.xaml, <Grid x:Name="LayoutRoot" Background="Transparent">   <Grid.RowDefinitions>     <RowDefinition Height="Auto"/>     <RowDefinition Height="*"/>   </Grid.RowDefinitions>     <!--TitlePanel contains the name of the application and page title-->   <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="12,17,0,28">     <TextBlock x:Name="ApplicationTitle" Text="KINETICS" Style="{StaticResource PhoneTextNormalStyle}"/>     <TextBlock x:Name="PageTitle" Text="drag and flick" Margin="9,-7,0,0" Style="{StaticResource PhoneTextTitle1Style}"/>   </StackPanel>     <!--ContentPanel - place additional content here-->   <Grid x:Name="ContentPanel" Grid.Row="1" >     <Canvas x:Name="MainCanvas" HorizontalAlignment="Stretch" VerticalAlignment="Stretch">       <Canvas.Background>         <LinearGradientBrush StartPoint="0 0" EndPoint="0 1">           <GradientStop Offset="0" Color="Black"/>           <GradientStop Offset="1.5" Color="BlanchedAlmond"/>         </LinearGradientBrush>       </Canvas.Background>     </Canvas>   </Grid> </Grid> the second row in the main grid contains a canvas element, MainCanvas, with its horizontal and vertical alignment set to stretch so that it occupies the entire grid. The canvas background is a linear gradient brush starting with Black and ending with BlanchedAlmond. We’ll add the button and image control to this canvas at run time. Moving to Mainpage.xaml.cs the Mainpage class contains the following members, public partial class MainPage : PhoneApplicationPage {     Button FlickButton;     Image FlickImage;       FrameworkElement ElemToMove = null;     double ElemVelX, ElemVelY;       const double SPEED_FACTOR = 60;       DispatcherTimer timer; FlickButton and FlickImage are the controls that we’ll add to the canvas. ElemToMove, ElemVelX and ElemVelY will be used by the timer callback to move the ui control. SPEED_FACTOR is used to scale the velocities of ui controls. Here’s the Mainpage constructor, // Constructor public MainPage() {     InitializeComponent();       AddButtonToCanvas();       AddImageToCanvas();       timer = new DispatcherTimer();     timer.Interval = TimeSpan.FromMilliseconds(35);     timer.Tick += new EventHandler(OnTimerTick); } We’ll look at those AddButton and AddImage functions in a moment. The constructor initializes a timer which fires every 35 milliseconds, this timer will be started after the flick gesture completes with some inertia. Back to AddButton and AddImage functions, void AddButtonToCanvas() {     LinearGradientBrush brush;     GradientStop stop1, stop2;       Random rand = new Random(DateTime.Now.Millisecond);       FlickButton = new Button();     FlickButton.Content = "";     FlickButton.Width = 100;     FlickButton.Height = 100;       brush = new LinearGradientBrush();     brush.StartPoint = new Point(0, 0);     brush.EndPoint = new Point(0, 1);       stop1 = new GradientStop();     stop1.Offset = 0;     stop1.Color = Colors.White;       stop2 = new GradientStop();     stop2.Offset = 1;     stop2.Color = (Application.Current.Resources["PhoneAccentBrush"] as SolidColorBrush).Color;       brush.GradientStops.Add(stop1);     brush.GradientStops.Add(stop2);       FlickButton.Background = brush;       Canvas.SetTop(FlickButton, rand.Next(0, 400));     Canvas.SetLeft(FlickButton, rand.Next(0, 200));       MainCanvas.Children.Add(FlickButton);       //subscribe to events     FlickButton.ManipulationDelta += new EventHandler<ManipulationDeltaEventArgs>(OnManipulationDelta);     FlickButton.ManipulationCompleted += new EventHandler<ManipulationCompletedEventArgs>(OnManipulationCompleted); } this function is basically glorifying a simple task. After creating the button and setting its height and width, its background is set to a linear gradient brush. The direction of the gradient is from top towards bottom and notice that the second stop color is the PhoneAccentColor, which changes along with the theme of the device. The line,     stop2.Color = (Application.Current.Resources["PhoneAccentBrush"] as SolidColorBrush).Color; does the magic of extracting the PhoneAccentBrush from application’s resources, getting its color and assigning it to the gradient stop. AddImage function is straight forward in comparison, void AddImageToCanvas() {     Random rand = new Random(DateTime.Now.Millisecond);       FlickImage = new Image();     FlickImage.Source = new BitmapImage(new Uri("/images/Marble.png", UriKind.Relative));       Canvas.SetTop(FlickImage, rand.Next(0, 400));     Canvas.SetLeft(FlickImage, rand.Next(0, 200));       MainCanvas.Children.Add(FlickImage);       //subscribe to events     FlickImage.ManipulationDelta += new EventHandler<ManipulationDeltaEventArgs>(OnManipulationDelta);     FlickImage.ManipulationCompleted += new EventHandler<ManipulationCompletedEventArgs>(OnManipulationCompleted); } The ManipulationDelta and ManipulationCompleted handlers are same for both the button and the image. OnManipulationDelta() should look familiar, a similar implementation was used in the previous post, void OnManipulationDelta(object sender, ManipulationDeltaEventArgs args) {     FrameworkElement Elem = sender as FrameworkElement;       double Left = Canvas.GetLeft(Elem);     double Top = Canvas.GetTop(Elem);       Left += args.DeltaManipulation.Translation.X;     Top += args.DeltaManipulation.Translation.Y;       //check for bounds     if (Left < 0)     {         Left = 0;     }     else if (Left > (MainCanvas.ActualWidth - Elem.ActualWidth))     {         Left = MainCanvas.ActualWidth - Elem.ActualWidth;     }       if (Top < 0)     {         Top = 0;     }     else if (Top > (MainCanvas.ActualHeight - Elem.ActualHeight))     {         Top = MainCanvas.ActualHeight - Elem.ActualHeight;     }       Canvas.SetLeft(Elem, Left);     Canvas.SetTop(Elem, Top); } all it does is calculate the control’s position, check for bounds and then set the top and left of the control. OnManipulationCompleted() is more interesting because here we need to check if the gesture completed with any inertia and if it did, start the timer and continue to move the ui control until it comes to a halt slowly, void OnManipulationCompleted(object sender, ManipulationCompletedEventArgs args) {     FrameworkElement Elem = sender as FrameworkElement;       if (args.IsInertial)     {         ElemToMove = Elem;           Debug.WriteLine("Linear VelX:{0:0.00}  VelY:{1:0.00}", args.FinalVelocities.LinearVelocity.X,             args.FinalVelocities.LinearVelocity.Y);           ElemVelX = args.FinalVelocities.LinearVelocity.X / SPEED_FACTOR;         ElemVelY = args.FinalVelocities.LinearVelocity.Y / SPEED_FACTOR;           timer.Start();     } } ManipulationCompletedEventArgs contains a member, IsInertial, which is set to true if the manipulation was completed with some inertia. args.FinalVelocities.LinearVelocity.X and .Y will contain the velocities along the X and Y axis. We need to scale down these values so they can be used to increment the ui control’s position sensibly. A reference to the ui control is stored in ElemToMove and the velocities are stored as well, these will be used in the timer callback to access the ui control. And finally, we start the timer. The timer callback function is as follows, void OnTimerTick(object sender, EventArgs e) {     if (null != ElemToMove)     {         double Left, Top;         Left = Canvas.GetLeft(ElemToMove);         Top = Canvas.GetTop(ElemToMove);           Left += ElemVelX;         Top += ElemVelY;           //check for bounds         if (Left < 0)         {             Left = 0;             ElemVelX *= -1;         }         else if (Left > (MainCanvas.ActualWidth - ElemToMove.ActualWidth))         {             Left = MainCanvas.ActualWidth - ElemToMove.ActualWidth;             ElemVelX *= -1;         }           if (Top < 0)         {             Top = 0;             ElemVelY *= -1;         }         else if (Top > (MainCanvas.ActualHeight - ElemToMove.ActualHeight))         {             Top = MainCanvas.ActualHeight - ElemToMove.ActualHeight;             ElemVelY *= -1;         }           Canvas.SetLeft(ElemToMove, Left);         Canvas.SetTop(ElemToMove, Top);           //reduce x,y velocities gradually         ElemVelX *= 0.9;         ElemVelY *= 0.9;           //when velocities become too low, break         if (Math.Abs(ElemVelX) < 1.0 && Math.Abs(ElemVelY) < 1.0)         {             timer.Stop();             ElemToMove = null;         }     } } if ElemToMove is not null, we get the top and left values of the control and increment the values with their X and Y velocities. Check for bounds, and if the control goes out of bounds we reverse its velocity. Towards the end, the velocities are reduced by 10% every time the timer callback is called, and if the velocities reach too low values the timer is stopped and ElemToMove is made null. Here’s a short video of the program, the video is a little dodgy because my display driver refuses to run the animations smoothly. The flicks aren’t always recognised but the program should run well on an actual device (or a pc with better configuration), You can download the source code from here: ButtonDragAndFlick.zip

  Read the article

• CodePlex Daily Summary for Wednesday, October 24, 2012

  CodePlex Daily Summary for Wednesday, October 24, 2012Popular ReleasesfastJSON: v2.0.9: - added support for root level DataSet and DataTable deserialize (you have to do ToObject<DataSet>(...) ) - added dataset testsInfo Gempa BMKG: Info Gempa BMKG v 1.0.0.3: Release perdana aplikasi pembaca informasi gempa dari data feeder BMKG.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.DNN Module Creator: 01.01.00: Updated templates for DNN7 ( ie. DAL2, Web Service API ). Numerous bug fixes and enhancements.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...ltxml.js - LINQ to XML for JavaScript: 1.0 - Beta 1: First release!ZXMAK2: Version 2.6.6.0: + fix refresh debugger after open RZX file + add NoFlic video filterEPiServer CMS ElencySolutions.MultipleProperty: ElencySolutions.MultipleProperty v1.6.3: The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London). Installation notes The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below: Embedded: <location path="util/ElencySolutionsMultipleP...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...MCEBuddy 2.x: MCEBuddy 2.3.4: Changelog for 2.3.4 (32bit and 64bit) 1. Fixed a bug introduced in 2.3.3 that would cause HD recordings and recordings with multiple audio channels to fail. 2. Updated <encoder-unsupported> option to compare with all Audio tracks for videos with multiple audio tracks. 3. Fixed a bug with SRT and EDL files, when input and output directory are the same the files are not preserved.Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsFoxOS: Stable Fox: Stable Fox Versione 0.0.0.1 Richiede .NET Framework 3.5 o superioriDoctor Reg: Doctor Reg V1.0: Doctor Reg V1.0 PT-PTkv: kv 1.0: if it were any more stable it would be a barn.LINQ for C++: cpplinq-20121020: LINQ for C++ is an attempt to bring LINQ-like list manipulation to C++11. This release includes just the source code. What's new in this release: join range operators: Inner Joins two ranges using a key selector reverse range operator distinct range operator union_with range operator intersect_with range operator except range operator concat range operator sequence_equal range aggregator to_lookup range aggregator This is a sample on how to use cpplinq: #include "cpplinq.h...helferlein_Form: 02.03.05: Requirements.Net 4.0 DotNetNuke 05.06.07 or higher, maybe it works with lower versions, but I developed it on this one and tested it on DotNetNuke 06.02.00 as well helferlein_BabelFish version 01.01.03 - please upgrade this first! Issues fixed Fixed issue with all users from all portals are listed as Host users in the sender options (E-Mail Options - Sender - ALL Users Listed) Registered postback-button for Excel-Export on Form submission edit control Changed behaviour Due to some mis...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.1: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Orchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.New ProjectsASP.NET DatePicker (Persian/Gregorian): This is just another DatePicker for ASP.NET that supports both Persian (Jalali/Shamsi/Solar) and Gregorian Calendar.AspectMap: AspectMap is an Aspect Oriented framework built on top of the StructureMap IoC framework.Building a Pinterest like Image Crawler: More about it here : http://www.alexpeta.ro/article/building-a-pinterest-like-image-crawlerCRM 2011 client scripting TypeScript definition file: xrm crm 2011 typescript javascript definition fileDarkSky Commerce: DarkSky Commerce is an Orchard module that provides a generic and extensible set of core commerce features and servicesDarkSky Learning: An Orchard module providing E-learning authoring tools and engines.Dusk Consulting: Dusk Consulting provides automation scripts to help IT Professionals and Developers alike.Edi: Edi is a an IDE based editor that is currently focused on text based editing (other editors may follow). This project is based on AvalonDock 2.0 and AvalonEdit.Entity Framework Extensions: This project includes extensions for the entity framework, includes unit of work pattern with event support, repository pattern with event support, and so on.EPiBoost (EPiServer 7 MVC Toolkit): Coming SoonExtended Guid: Easilly create version 5 guids. Converts an arbitrary string to a guid given a specific work area, or namespace.FileToText: pour la création de liste de fichierFilmBook, Film and Photo Archival Management: FilmBook is a simple image gallery and organization application. It's goal is to help identify the location of negatives in an archival page.FridgeBoard: Este proyecto está siendo realizado por alumnos de informática. No nos hacemos responsables de la mala calidad del mismo.GIV_P1: testyIQTool: Provide a set of tools to generate reports capturing the state of a server. This is written in powershell to allow easy modification / update of the scriptsLeaving Application System: have a good time.Leaving Management System: optimize work flow of staff work attendance managementltxml.js - LINQ to XML for JavaScript: ltxml.js is an XML processing library for JavaScript that is inspired by and largely similar to the LINQ to XML library for .NET.Microsoft .NET SDK For Hadoop: A collection of API's, tools and samples for using .NET with Apache Hadoop.MyLib: This is my personal library of various tidbits that I have been using regularly. Includes a generic repository with EF and MongoDB implementations.Parlez MVC: A multi-lingual implementation for the ASP.NET MVC 4 framework to make it easier to build websites that are viewable in different languages.Perfect Sport Nutrition: Proyecto realizado por la Empresa de Desarrollo Software SoftwareHC E.I.R.LScale Model Database: This project is a work of databasesSliding Block Puzzle: This is a simple (not very good) game for Windows Phone 7.1 (Mango). The point of it is to show off how to do different things in WP7.1.SmallBasic Extension Manager: SXM, or the SmallBasic Extension Manager, is a program intended for use with the Small Basic programming language from Microsoft.SQL Azure Federation Backup to Azure Blob Storage using Azure Worker: Azure Worker project, that will backup any number of Azure SQL Databases to any selected Azure Blob containers. Config in XML. Automatic 7z compression.TeF: A framework for running tests with a plenty of features and ease of use.Testge: testTwittOracle: This project is a prototype project intended to be submitted in a competition. The details will be updated later as things are finalized.uMembership - Alternative Umbraco Member Api: uMembership is an alternative and faster way of dealing with Members in Umbraco when you have 1000's or even 100Variedades Silverlight 5: Varidades Silverlight 5Website d?t tour du lich: Ð? án môn ASP.NET Xây d?ng website d?t tour du l?ch d?a trên mô hình MVCWPF About Box: WPF About Box is simple and free about box for WPF using MVVM pattern. Several properties can be set. Some properties are read from assembly, automatically.WTUnion: WTUnionXML Cleaner: Console app for batch cleaning XML files containing ilegal caracters. It can be useful for cleaning XML files before importing them to SOLR or something similarXmlToObject: XmlToObject is a .Net library for object serialization with use of XPath expressions applied to class fields and properties via custom attributes.XNAGalcon: This Project will create Galcon Game for XNA version

  Read the article

• Navigation in Win8 Metro Style applications

  - by Dennis Vroegop

  In Windows 8, Touch is, as they say, a first class citizen. Now, to be honest: they also said that in Windows 7. However in Win8 this is actually true. Applications are meant to be used by touch. Yes, you can still use mouse, keyboard and pen and your apps should take that into account but touch is where you should focus on initially. Will all users have touch enabled devices? No, not in the first place. I don’t think touchscreens will be on every device sold next year. But in 5 years? Who knows? Don’t forget: if your app is successful it will be around for a long time and by that time touchscreens will be everywhere. Another reason to embrace touch is that it’s easier to develop a touch-oriented app and then to make sure that keyboard, nouse and pen work as doing it the other way around. Porting a mouse-based application to a touch based application almost never works. The reverse gives you much more chances for success. That being said, there are some things that you need to think about. Most people have more than one finger, while most users only use one mouse at the time. Still, most touch-developers translate their mouse-knowledge to the touch and think they did a good job. Martin Tirion from Microsoft said that since Touch is a new language people face the same challenges they do when learning a new real spoken language. The first thing people try when learning a new language is simply replace the words in their native language to the newly learned words. At first they don’t care about grammar. To a native speaker of that other language this sounds all wrong but they still will be able to understand what the intention was. If you don’t believe me: try Google translate to translate something for you from your language to another and then back and see what happens. The same thing happens with Touch. Most developers translate a mouse-click into a tap-event and think they’re done. Well matey, you’re not done. Not by far. There are things you can do with a mouse that you cannot do with touch. Think hover. A mouse has the ability to ‘slide’ over UI elements. Touch doesn’t (I know: with Pen you can do this but I’m talking about actual fingers here). A touch is either there or it isn’t. And right-click? Forget about it. A click is a click.  Yes, you have more than one finger but the machine doesn’t know which finger you use… The other way around is also true. Like I said: most users only have one mouse but they are likely to have more than one finger. So how do we take that into account? Thinking about this is really worth the time: you might come up with some surprisingly good ideas! Still: don’t forget that not every user has touch-enabled hardware so make sure your app is useable for both groups. Keep this in mind: we’re going to need it later on! Now. Apps should be easy to use. You don’t want your user to read through pages and pages of documentation before they can use the app. Imagine that spotter next to an airfield suddenly seeing a prototype of a Concorde 2 landing on the nearby runway. He probably wants to enter that information in our app NOW and not after he’s taken a 3 day course. Even if he still has to download the app, install it for the first time and then run it he should be on his way immediately. At least, fast enough to note down the details of that unique, rare and possibly exciting sighting he just did. So.. How do we do this? Well, I am not talking about games here. Games are in a league of their own. They fall outside the scope of the apps I am describing. But all the others can roughly be characterized as being one of two flavors: the navigation is either flat or hierarchical. That’s it. And if it’s hierarchical it’s no more than three levels deep. Not more. Your users will get lost otherwise and we don’t want that. Flat is simple. Just imagine we have one screen that is as high as our physical screen is and as wide as you need it to be. Don’t worry if it doesn’t fit on the screen: people can scroll to the right and left. Don’t combine up/down and left/right scrolling: it’s confusing. Next to that, since most users will hold their device in landscape mode it’s very natural to scroll horizontal. So let’s use that when we have a flat model. The same applies to the hierarchical model. Try to have at most three levels. If you need more space, find a way to group the items in such a way that you can fit it in three, very wide lanes. At the highest level we have the so called hub level. This is the entry point of the app and as such it should give the user an immediate feeling of what the app is all about. If your app has categories if items then you might show these categories here. And while you’re at it: also show 2 or 3 of the items itself here to give the user a taste of what lies beneath. If the user selects a category you go to the section part. Here you show several sections (again, go as wide as you need) with again some detail examples. After that: the details layer shows each item. By giving some samples of the underlaying layer you achieve several things: you make the layer attractive by showing several different things, you show some highlights so the user sees actual content and you provide a shortcut to the layers underneath. The image below is borrowed from the http://design.windows.com website which has tons and tons of examples: For our app we’ll use this layout. So what will we show? Well, let’s see what sorts of features our app has to offer. I’ll repeat them here: Note planes Add pictures of that plane Notify friends of new spots Share new spots on social media Write down arrival times Write down departure times Write down the runway they take I am sure you can think of some more items but for now we'll use these. In the hub we’ll show something that represents “Spots”, “Friends”, “Social”. Apparently we have an inner list of spotter-friends that are in the app, while we also have to whole world in social. In the layer below we show something else, depending on what the user choose. When they choose “Spots” we’ll display the last spots, last spots by our friends (so we can actually jump from this category to the one next to it) and so on. When they choose a “spot” (or press the + icon in the App bar, which I’ll talk about next time) they go to the lowest and final level that shows details about that spot, including a picture, date and time and the notes belonging to that entry. You’d be amazed at how easy it is to organize your app this way. If you don’t have enough room in these three layers you probably could easily get away with grouping items. Take a look at our hub: we have three completely different things in one place. If you still can’t fit it all in in a logical and consistent way, chances are you are trying to do too much in this app. Go back to your mission statement, determine if it is specific enough and if your feature list helps that statement or makes it unclear. Go ahead. Give it a go! Next time we’ll talk about the look and feel, the charms and the app-bar….

  Read the article

• Accessing your web server via IPv6

  Being able to run your systems on IPv6, have automatic address assignment and the ability to resolve host names are the necessary building blocks in your IPv6 network infrastructure. Now, that everything is in place it is about time that we are going to enable another service to respond to IPv6 requests. The following article will guide through the steps on how to enable Apache2 httpd to listen and respond to incoming IPv6 requests. This is the fourth article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. Surfing the web - IPv6 style Enabling IPv6 connections in Apache 2 is fairly simply. But first let's check whether your system has a running instance of Apache2 or not. You can check this like so: $ service apache2 status Apache2 is running (pid 2680). In case that you got a 'service unknown' you have to install Apache to proceed with the following steps: $ sudo apt-get install apache2 Out of the box, Apache binds to all your available network interfaces and listens to TCP port 80. To check this, run the following command: $ sudo netstat -lnptu | grep "apache2\W*$"tcp6       0      0 :::80                   :::*                    LISTEN      28306/apache2 In this case Apache2 is already binding to IPv6 (and implicitly to IPv4). If you only got a tcp output, then your HTTPd is not yet IPv6 enabled. Check your Listen directive, depending on your system this might be in a different location than the default in Ubuntu. $ sudo nano /etc/apache2/ports.conf # If you just change the port or add more ports here, you will likely also# have to change the VirtualHost statement in# /etc/apache2/sites-enabled/000-default# This is also true if you have upgraded from before 2.2.9-3 (i.e. from# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and# README.Debian.gzNameVirtualHost *:80Listen 80<IfModule mod_ssl.c>    # If you add NameVirtualHost *:443 here, you will also have to change    # the VirtualHost statement in /etc/apache2/sites-available/default-ssl    # to <VirtualHost *:443>    # Server Name Indication for SSL named virtual hosts is currently not    # supported by MSIE on Windows XP.    Listen 443</IfModule><IfModule mod_gnutls.c>    Listen 443</IfModule> Just in case that you don't have a ports.conf file, look for it like so: $ cd /etc/apache2/$ fgrep -r -i 'listen' ./* And modify the related file instead of the ports.conf. Which most probably might be either apache2.conf or httpd.conf anyways. Okay, please bear in mind that Apache can only bind once on the same interface and port. So, eventually, you might be interested to add another port which explicitly listens to IPv6 only. In that case, you would add the following in your configuration file: Listen 80Listen [2001:db8:bad:a55::2]:8080 But this is completely optional... Anyways, just to complete all steps, you save the file, and then check the syntax like so: $ sudo apache2ctl configtestSyntax OK Ok, now let's apply the modifications to our running Apache2 instances: $ sudo service apache2 reload * Reloading web server config apache2   ...done. $ sudo netstat -lnptu | grep "apache2\W*$"                                                                                               tcp6       0      0 2001:db8:bad:a55:::8080 :::*                    LISTEN      5922/apache2    tcp6       0      0 :::80                   :::*                    LISTEN      5922/apache2 There we have two daemons running and listening to different TCP ports. Now, that the basics are in place, it's time to prepare any website to respond to incoming requests on the IPv6 address. Open up any configuration file you have below your sites-enabled folder. $ ls -al /etc/apache2/sites-enabled/... $ sudo nano /etc/apache2/sites-enabled/000-default <VirtualHost *:80 [2001:db8:bad:a55::2]:8080>        ServerAdmin [email protected]        ServerName server.ios.mu        ServerAlias server Here, we have to check and modify the VirtualHost directive and enable it to respond to the IPv6 address and port our web server is listening to. Save your changes, run the configuration test and reload Apache2 in order to apply your modifications. After successful steps you can launch your favourite browser and navigate to your IPv6 enabled web server. Accessing an IPv6 address in the browser That looks like a successful surgery to me... Note: In case that you received a timeout, check whether your client is operating on IPv6, too.

  Read the article

• jqgrid with asp.net webmethod and json working with sorting, paging, searching and LINQ

  - by aimlessWonderer

  THIS WORKS! Most topics covering jqgrid and asp.net seem to relate to just receiving JSON, or working in the MVC framework, or utilizing other handlers or web services... but not many dealt with actually passing parameters back to an actual webmethod in the codebehind. Furthermore, scarce are the examples that contain successful implementation the AJAX paging, sorting, or searching along with LINQ to SQL for asp.net jqGrid. Below is a working example that may help others who need help to pass parameters to jqGrid in order to have correct paging, sorting, filtering.. it uses pieces from here and there... ================================================== First, THE JAVASCRIPT <script type="text/javascript"> $(document).ready(function() { var grid = $("#list"); $("#list").jqGrid({ // setup custom parameter names to pass to server prmNames: { search: "isSearch", nd: null, rows: "numRows", page: "page", sort: "sortField", order: "sortOrder" }, // add by default to avoid webmethod parameter conflicts postData: { searchString: '', searchField: '', searchOper: '' }, // setup ajax call to webmethod datatype: function(postdata) { mtype: "GET", $.ajax({ url: 'PageName.aspx/getGridData', type: "POST", contentType: "application/json; charset=utf-8", data: JSON.stringify(postdata), dataType: "json", success: function(data, st) { if (st == "success") { var grid = jQuery("#list")[0]; grid.addJSONData(JSON.parse(data.d)); } }, error: function() { alert("Error with AJAX callback"); } }); }, // this is what jqGrid is looking for in json callback jsonReader: { root: "rows", page: "page", total: "totalpages", records: "totalrecords", cell: "cell", id: "id", //index of the column with the PK in it userdata: "userdata", repeatitems: true }, colNames: ['Id', 'First Name', 'Last Name'], colModel: [ { name: 'id', index: 'id', width: 55, search: false }, { name: 'fname', index: 'fname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} }, { name: 'lname', index: 'lname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} } ], rowNum: 10, rowList: [10, 20, 30], pager: jQuery("#pager"), sortname: "fname", sortorder: "asc", viewrecords: true, caption: "Grid Title Here" }).jqGrid('navGrid', '#pager', { edit: false, add: false, del: false }, {}, // default settings for edit {}, // add {}, // delete { closeOnEscape: true, closeAfterSearch: true}, //search {} ) }); </script> ================================================== Second, THE C# WEBMETHOD [WebMethod] public static string getGridData(int? numRows, int? page, string sortField, string sortOrder, bool isSearch, string searchField, string searchString, string searchOper) { string result = null; MyDataContext db = null; try { //--- retrieve the data db = new MyDataContext("my connection string path"); var query = from u in db.TBL_USERs select u; //--- determine if this is a search filter if (isSearch) { searchOper = getOperator(searchOper); // need to associate correct operator to value sent from jqGrid string whereClause = String.Format("{0} {1} {2}", searchField, searchOper, "@" + searchField); //--- associate value to field parameter Dictionary<string, object> param = new Dictionary<string, object>(); param.Add("@" + searchField, searchString); query = query.Where(whereClause, new object[1] { param }); } //--- setup calculations int pageIndex = page ?? 1; //--- current page int pageSize = numRows ?? 10; //--- number of rows to show per page int totalRecords = query.Count(); //--- number of total items from query int totalPages = (int)Math.Ceiling((decimal)totalRecords / (decimal)pageSize); //--- number of pages //--- filter dataset for paging and sorting IQueryable<TBL_USER> orderedRecords = query.OrderBy(sortfield); IEnumerable<TBL_USER> sortedRecords = orderedRecords.ToList(); if (sortorder == "desc") sortedRecords= sortedRecords.Reverse(); sortedRecords= sortedRecords .Skip((pageIndex - 1) * pageSize) //--- page the data .Take(pageSize); //--- format json var jsonData = new { totalpages = totalPages, //--- number of pages page = pageIndex, //--- current page totalrecords = totalRecords, //--- total items rows = ( from row in sortedRecords select new { i = row.USER_ID, cell = new string[] { row.USER_ID.ToString(), row.FNAME.ToString(), row.LNAME } } ).ToArray() }; result = Newtonsoft.Json.JsonConvert.SerializeObject(jsonData); } catch (Exception ex) { Debug.WriteLine(ex); } finally { if (db != null) db.Dispose(); } return result; } ================================================== Third, NECESSITIES In order to have dynamic OrderBy clauses in the LINQ, I had to pull in a class to my AppCode folder called 'Dynamic.cs'. You can retrieve the file from downloading here. You will find the file in the "DynamicQuery" folder. That file will give you the ability to utilized dynamic ORDERBY clause since we don't know what column we're filtering by except on the initial load. To serialize the JSON back from the C-sharp to the JS, I incorporated the James Newton-King JSON.net DLL found here : http://json.codeplex.com/releases/view/37810. After downloading, there is a "Newtonsoft.Json.Compact.dll" which you can add in your Bin folder as a reference Here's my USING's block using System; using System.Collections; using System.Collections.Generic; using System.Linq; using System.Web.UI.WebControls; using System.Web.Services; using System.Linq.Dynamic; For the Javascript references, I'm using the following scripts in respective order in case that helps some folks: 1) jquery-1.3.2.min.js ... 2) jquery-ui-1.7.2.custom.min.js ... 3) json.min.js ... 4) i18n/grid.locale-en.js ... 5) jquery.jqGrid.min.js For the CSS, I'm using jqGrid's necessities as well as the jQuery UI Theme: 1) jquery_theme/jquery-ui-1.7.2.custom.css ... 2) ui.jqgrid.css The key to getting the parameters from the JS to the WebMethod without having to parse an unserialized string on the backend or having to setup some JS logic to switch methods for different numbers of parameters was this block postData: { searchString: '', searchField: '', searchOper: '' }, Those parameters will still be set correctly when you actually do a search and then reset to empty when you "reset" or want the grid to not do any filtering Hope this helps some others!!!! Please reply if you find major issues or ways of refactoring or doing better that I haven't considered.

  Read the article

• Calling a WCF service from another WCF service

  - by ultraman69

  Hi ! I have a WCF service hosted on a windows service on my Server1. It also has IIS on this machine. I call the service from a web app and it works fine. But within this service, I have to call another WCF sevice (also hosted on a windows service) located on Server2. The security credentials are set to "Message" and "Username". I have an error like "SOAP protcol negociation failed". It's a problem with my server certificate public key that doesn't seem to be recognise. However, if I call the service on the Server2 from Server1 in a console app, it works fine. I followed this tutorial to set up my certificates : http://www.codeproject.com/KB/WCF/wcf_certificates.aspx Here's the config file from my service on Server1 that tries to call the second one : <endpoint address="" binding="wsHttpBinding" contract="Microsoft.ServiceModel.Samples.ITraitement" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> <client> <endpoint address="http://Server2:8000/servicemodelsamples/service" behaviorConfiguration="myClientBehavior" binding="wsHttpBinding" bindingConfiguration="MybindingCon" contract="Microsoft.ServiceModel.Samples.ICalculator" name=""> <identity> <dns value="ODWCertificatServeur" /> </identity> </endpoint> </client> <bindings> <wsHttpBinding> <binding name="MybindingCon"> <security mode="Message"> <message clientCredentialType="UserName" /> </security> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="ServiceTraitementBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> </behavior> </serviceBehaviors> <endpointBehaviors> <behavior name="myClientBehavior"> <clientCredentials> <clientCertificate findValue="MachineServiceTraitement" x509FindType="FindBySubjectName" storeLocation="LocalMachine" storeName="My" /> <serviceCertificate> <authentication certificateValidationMode="ChainTrust" revocationMode="NoCheck"/> </serviceCertificate> </clientCredentials> </behavior> </endpointBehaviors> </behaviors> And here's the config file from the web app that calls the service on Server1 : <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_ITraitement" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://localhost:8020/ServiceTraitementPC" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_ITraitement" contract="ITraitement" name="WSHttpBinding_ITraitement"> </endpoint> </client> Any idea why it works if if I call it in a console app and not from my service ? Maybe it has something to do with the certificateValidationMode="ChainTrust" ?

  Read the article

• Fluent NHibernate: mapping complex many-to-many (with additional columns) and setting fetch

  - by HackedByChinese

  I need a Fluent NHibernate mapping that will fulfill the following (if nothing else, I'll also take the appropriate NHibernate XML mapping and reverse engineer it). DETAILS I have a many-to-many relationship between two entities: Parent and Child. That is accomplished by an additional table to store the identities of the Parent and Child. However, I also need to define two additional columns on that mapping that provide more information about the relationship. This is roughly how I've defined my types, at least the relevant parts (where Entity is some base type that provides an Id property and checks for equivalence based on that Id): public class Parent : Entity { public virtual IList<ParentChildRelationship> Children { get; protected set; } public virtual void AddChildRelationship(Child child, int customerId) { var relationship = new ParentChildRelationship { CustomerId = customerId, Parent = this, Child = child }; if (Children == null) Children = new List<ParentChildRelationship>(); if (Children.Contains(relationship)) return; relationship.Sequence = Children.Count; Children.Add(relationship); } } public class Child : Entity { // child doesn't care about its relationships } public class ParentChildRelationship { public int CustomerId { get; set; } public Parent Parent { get; set; } public Child Child { get; set; } public int Sequence { get; set; } public override bool Equals(object obj) { if (ReferenceEquals(null, obj)) return false; if (ReferenceEquals(this, obj)) return true; var other = obj as ParentChildRelationship; if (return other == null) return false; return (CustomerId == other.CustomerId && Parent == other.Parent && Child == other.Child); } public override int GetHashCode() { unchecked { int result = CustomerId; result = Parent == null ? 0 : (result*397) ^ Parent.GetHashCode(); result = Child == null ? 0 : (result*397) ^ Child.GetHashCode(); return result; } } } The tables in the database look approximately like (assume primary/foreign keys and forgive syntax): create table Parent ( id int identity(1,1) not null ) create table Child ( id int identity(1,1) not null ) create table ParentChildRelationship ( customerId int not null, parent_id int not null, child_id int not null, sequence int not null ) I'm OK with Parent.Children being a lazy loaded property. However, the ParentChildRelationship should eager load ParentChildRelationship.Child. Furthermore, I want to use a Join when I eager load. The SQL, when accessing Parent.Children, NHibernate should generate an equivalent query to: SELECT * FROM ParentChildRelationship rel LEFT OUTER JOIN Child ch ON rel.child_id = ch.id WHERE parent_id = ? OK, so to do that I have mappings that look like this: ParentMap : ClassMap<Parent> { public ParentMap() { Table("Parent"); Id(c => c.Id).GeneratedBy.Identity(); HasMany(c => c.Children).KeyColumn("parent_id"); } } ChildMap : ClassMap<Child> { public ChildMap() { Table("Child"); Id(c => c.Id).GeneratedBy.Identity(); } } ParentChildRelationshipMap : ClassMap<ParentChildRelationship> { public ParentChildRelationshipMap() { Table("ParentChildRelationship"); CompositeId() .KeyProperty(c => c.CustomerId, "customerId") .KeyReference(c => c.Parent, "parent_id") .KeyReference(c => c.Child, "child_id"); Map(c => c.Sequence).Not.Nullable(); } } So, in my test if i try to get myParentRepo.Get(1).Children, it does in fact get me all the relationships and, as I access them from the relationship, the Child objects (for example, I can grab them all by doing parent.Children.Select(r => r.Child).ToList()). However, the SQL that NHibernate is generating is inefficient. When I access parent.Children, NHIbernate does a SELECT * FROM ParentChildRelationship WHERE parent_id = 1 and then a SELECT * FROM Child WHERE id = ? for each child in each relationship. I understand why NHibernate is doing this, but I can't figure out how to set up the mapping to make NHibernate query the way I mentioned above.

  Read the article

• alert(line) alerts 'ac' and typeof(line) is 'string', but charAt is not a function

  - by Delirium tremens

  alert(line) alerts 'ac' typeof(line) is 'string' When I run line.charAt(0), charAt is not a function. When line is 'http://www.google.com/', it works, I think it's the UTF-8 encoding of the file that I opened... How to make charAt work with UTF-8? UPDATED: http://mxr.mozilla.org/mozilla-central/source/netwerk/dns/src/effective_tld_names.dat?raw=1 is in my extension's chrome folder as effective_tld_names.dat To run the code: authority = 'orkut.com.br'; lines = sc_geteffectivetldnames(); lines = sc_preparetouse(lines); domainname = sc_extractdomainname(authority, lines); The code: function sc_geteffectivetldnames () { var MY_ID = "[email protected]"; var em = Components.classes["@mozilla.org/extensions/manager;1"]. getService(Components.interfaces.nsIExtensionManager); var file = em.getInstallLocation(MY_ID).getItemFile(MY_ID, "chrome/effective_tld_names.dat"); var istream = Components.classes["@mozilla.org/network/file-input-stream;1"]. createInstance(Components.interfaces.nsIFileInputStream); istream.init(file, 0x01, 0444, 0); istream.QueryInterface(Components.interfaces.nsILineInputStream); var line = {}, lines = [], hasmore; do { hasmore = istream.readLine(line); lines.push(line.value); } while(hasmore); istream.close(); return lines; } function sc_preparetouse(lines) { lines = sc_notcomment(lines); lines = sc_notempty(lines); return lines; } function sc_notcomment(lines) { var line; var commentre; var matchedcomment; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; commentre = new RegExp("^//", 'i'); matchedcomment = line.match(commentre); if(matchedcomment) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_notempty(lines) { var line; var emptyre; var matchedempty; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; emptyre = new RegExp("^$", 'i'); matchedempty = line.match(emptyre); if(matchedempty) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_extractdomainname(authority, lines) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); alert(typeof(line)); if (line.chatAt(0) == '*') { alert('test1'); continue; } if (line.chatAt(0) == '!') { alert('test2'); line.chatAt(0) = ''; } alert('test3'); checkline = sc_checknotasteriskline(authority, line); if (checkline) { domainname = checkline; } } if (!domainname) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); if (line.chatAt(0) != '*') { alert('test4'); continue; } if (line.chatAt(0) == '!') { alert('test5'); line.chatAt(0) = ''; } alert('test6'); checkline = sc_checkasteriskline(authority, line); if (checkline) { domainname = checkline; } } } return domainname; } It alerts 'ac', then 'string', then nothing.

  Read the article

• alert(line) alerts 'ac' and typeof(line) is 'string', but charAt is not a function

  - by Delirium tremens

  alert(line) alerts 'ac' typeof(line) is 'string' When I run line.charAt(0), charAt is not a function. When line is 'http://www.google.com/', it works, I think it's the UTF-8 encoding of the file that I opened... How to make charAt work with UTF-8? UPDATED: http://mxr.mozilla.org/mozilla-central/source/netwerk/dns/src/effective_tld_names.dat?raw=1 is in my extension's chrome folder as effective_tld_names.dat To run the code: authority = 'orkut.com.br'; lines = sc_geteffectivetldnames(); lines = sc_preparetouse(lines); domainname = sc_extractdomainname(authority, lines); The code: function sc_geteffectivetldnames () { var MY_ID = "[email protected]"; var em = Components.classes["@mozilla.org/extensions/manager;1"]. getService(Components.interfaces.nsIExtensionManager); var file = em.getInstallLocation(MY_ID).getItemFile(MY_ID, "chrome/effective_tld_names.dat"); var istream = Components.classes["@mozilla.org/network/file-input-stream;1"]. createInstance(Components.interfaces.nsIFileInputStream); istream.init(file, 0x01, 0444, 0); istream.QueryInterface(Components.interfaces.nsILineInputStream); var line = {}, lines = [], hasmore; do { hasmore = istream.readLine(line); lines.push(line.value); } while(hasmore); istream.close(); return lines; } function sc_preparetouse(lines) { lines = sc_notcomment(lines); lines = sc_notempty(lines); return lines; } function sc_notcomment(lines) { var line; var commentre; var matchedcomment; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; commentre = new RegExp("^//", 'i'); matchedcomment = line.match(commentre); if(matchedcomment) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_notempty(lines) { var line; var emptyre; var matchedempty; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; emptyre = new RegExp("^$", 'i'); matchedempty = line.match(emptyre); if(matchedempty) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_extractdomainname(authority, lines) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); alert(typeof(line)); if (line.chatAt(0) == '*') { alert('test1'); continue; } if (line.chatAt(0) == '!') { alert('test2'); line.chatAt(0) = ''; } alert('test3'); checkline = sc_checknotasteriskline(authority, line); if (checkline) { domainname = checkline; } } if (!domainname) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); if (line.chatAt(0) != '*') { continue; alert('test4'); } if (line.chatAt(0) == '!') { line.chatAt(0) = ''; alert('test5'); } alert('test6'); checkline = sc_checkasteriskline(authority, line); if (checkline) { domainname = checkline; } } } return domainname; } It alerts 'ac', then 'string', then nothing.

  Read the article

• WCF app Deployed on Win7 Machine and get connection refused error

  - by Belliez

  I have created a Sync Framework application based on the following sample from microsoft and deployed it to a new Windows 7 machine for testing. The app runs ok but when I attempt to communicate I get the following error: Could not connect to http://localhost:8000/RelationalSyncContract/SqlSyncService/. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8000. I am wondering if there is something I am missing. This is my first experience using WCF and followed microsoft sample code. I have disabled the firewall and opened port 8000 for both TCP and UDP. Not sure what to look at next. Below is my App.config file if this helps: <?xml version="1.0"?> <configuration> <system.web> <compilation debug="true"/> <httpRuntime maxRequestLength="32768" /> </system.web> <!-- When deploying the service library project, the content of the config file must be added to the host's app.config file. System.Configuration does not support config files for libraries. --> <system.serviceModel> <services> <service behaviorConfiguration="WebSyncContract.SyncServiceBehavior" name="WebSyncContract.SqlWebSyncService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="largeMessageHttpBinding" contract="WebSyncContract.ISqlSyncContract"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="http://localhost:8000/RelationalSyncContract/SqlSyncService/"/> </baseAddresses> </host> </service> </services> <bindings> <wsHttpBinding> <!-- We are using Server cert only.--> <binding name="largeMessageHttpBinding" maxReceivedMessageSize="204857600"> <readerQuotas maxArrayLength="1000000"/> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="WebSyncContract.SyncServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="True"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="True"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> <startup><supportedRuntime version="v2.0.50727"/></startup></configuration> Thank you, your help is much appreciated.

  Read the article

• Using pfSense, OpenVPN Connects but Still Can't See the Network

  - by nicorellius

  I am having an OpenVPN issue. I have a pfSense box at home configured to allow traffic through a VPN tunnel. The client computer is Windows XP Home, behind a standard Comcast connection and a Netgear wireless router. I use OpenVPN to access my work network (from where I am trying to get out of in this post) from home (with an XP Pro machine behind pfSense), and this works fine. The client config is similar but has the changes specific to my setup... Here is my XP Home config: client dev tun proto tcp remote pfsense.*.org 1194 (starred out by me) resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 When I launch the OpenVPN GUI, the Tunnel TAP network connection turns red, and I can right-click that to connect to the server. Everything seems to work fine until I browse for the actual network. The Tunnel TAP connection turns green and it says connected to 10.1.1.6 (I have tried different IP pools here too with no luck). I can see the internal network fine, but my home network behind pfSense is not there. I have tried browsing there by using Tools Map Network Drive, using the browser, with no success. When I open the command line on the client and use the ipconfig -all command, I get the following: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : *** (starred out by me) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.1.1.6 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.1.1.5 Lease Obtained. . . . . . . . . . : Monday, March 15, 2010 1:18:37 PM Lease Expires . . . . . . . . . . : Tuesday, March 15, 2011 1:18:37 PM I noticed that the default gateway is not present. Could this be my problem? I am still relatively new to firewalls, VPN, and network configuration so I'm sure I am messing up something simple. Oh yah, I should note that I have firewall rules configured for pfSense to allow traffic through the WAN and the LAN. At first there was just the WAN firewall rule, because that is what I got from the literature I was reading. I then created a LAN rule as well, but I'm not sure if this was correct. Neither way works, though. Screen shots below: Any help is much appreciated.

  Read the article

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• WCF contract mismatch problem

  - by Tom

  Hi there, I have a client console app talking to a WCF service and I get the following error: "The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error." I think it's becuase of a contract mismatch but i can't figure out why. The service runs just fine by itself and the 2 parts were working together until i added the impersonation code. Can anyone see what is wrong? Here is the client, all done in code: NetTcpBinding binding = new NetTcpBinding(); binding.Security.Mode = SecurityMode.Message; binding.Security.Message.ClientCredentialType = MessageCredentialType.Windows; EndpointAddress endPoint = new EndpointAddress(new Uri("net.tcp://serverName:9990/TestService1")); ChannelFactory<IService1> channel = new ChannelFactory<IService1>(binding, endPoint); channel.Credentials.Windows.AllowedImpersonationLevel = TokenImpersonationLevel.Impersonation; IService1 service = channel.CreateChannel(); And here is the config file of the WCF service: <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="MyBinding"> <security mode="Message"> <transport clientCredentialType="Windows"/> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="WCFTest.ConsoleHost2.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization impersonateCallerForAllOperations="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="WCFTest.ConsoleHost2.Service1Behavior" name="WCFTest.ConsoleHost2.Service1"> <endpoint address="" binding="wsHttpBinding" contract="WCFTest.ConsoleHost2.IService1"> <identity> <dns value="" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <endpoint binding="netTcpBinding" bindingConfiguration="MyBinding" contract="WCFTest.ConsoleHost2.IService1" /> <host> <baseAddresses> <add baseAddress="http://serverName:9999/TestService1/" /> <add baseAddress="net.tcp://serverName:9990/TestService1/" /> </baseAddresses> </host> </service> </services> </system.serviceModel> </configuration>

  Read the article

• WCF Error: the client and service bindings may be mismatched?

  - by Rev

  Hi let see server config and client config. Then help me find difference between these configs!! Client config <system.serviceModel> <client> <endpoint address="http://localhost/admin2/AdminCentralService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Config" contract="TIR.ThreeTier.ICommandInvoker" name="AdminCentralServiceConfig" /> <endpoint binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Config" contract="TIR.ThreeTier.ICommandInvoker" name="CommandInvokerConfig" /> </client> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_Config" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> Server Config <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="AdminCentral.Business.Web.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_Config" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true"/> </security> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="AdminCentral.Business.Web.Service1Behavior" name="AdminCentral.Business.Web.AdminCentralService"> <endpoint address="" binding="wsHttpBinding" contract="AdminCentral.Business.Web.ICommandInvoker"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services>

  Read the article

• UITableView: Juxtaposing row, header, and footer insertions/deletions

  - by jdandrea

  Consider a very simple UITableView with one of two states. First state: One (overall) table footer One section containing two rows, a section header, and a section footer Second state: No table footer One section containing four rows and no section header/footer In both cases, each row is essentially one of four possible UITableViewCell objects, each containing its own UITextField. We don't even bother with reuse or caching, since we're only dealing with four known cells in this case. They've been created in an accompanying XIB, so we already have them all wired up and ready to go. Now consider we want to toggle between the two states. Sounds easy enough. Let's suppose our view controller's right bar button item provides the toggling support. We'll also track the current state with an ivar and enumeration. To be explicit for a sec, here's how one might go from state 1 to 2. (Presume we handle the bar button item's title as well.) In short, we want to clear out our table's footer view, then insert the third and fourth rows. We batch this inside an update block like so: // Brute forced references to the third and fourth rows in section 0 NSUInteger row02[] = {0, 2}; NSUInteger row03[] = {0, 3}; [self.tableView beginUpdates]; state = tableStateTwo; // 'internal' iVar, not a property self.tableView.tableFooterView = nil; [self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObjects: [NSIndexPath indexPathWithIndexes:row02 length:2], [NSIndexPath indexPathWithIndexes:row03 length:2], nil] withRowAnimation:UITableViewRowAnimationFade]; [self.tableView endUpdates]; For the reverse, we want to reassign the table footer view (which, like the cells, is in the XIB ready and waiting), and remove the last two rows: // Use row02 and row03 from earlier snippet [self.tableView beginUpdates]; state = tableStateOne; self.tableView.tableFooterView = theTableFooterView; [self.tableView deleteRowsAtIndexPaths:[NSArray arrayWithObjects: [NSIndexPath indexPathWithIndexes:row02 length:2], [NSIndexPath indexPathWithIndexes:row03 length:2], nil] withRowAnimation:UITableViewRowAnimationFade]; [self.tableView endUpdates]; Now, when the table asks for rows, it's very cut and dry. The first two cells are the same in both cases. Only the last two appear/disappear depending on the state. The state ivar is consulted when the Table View asks for things like number of rows in a section, height for header/footer in a section, or view for header/footer in a section. This last bit is also where I'm running into trouble. Using the above logic, section 0's header/footer does not disappear. Specifically, the footer stays below the inserted rows, but the header now overlays the topmost row. If we switch back to state one, the section footer is removed, but the section header remains. How about using [self.tableView reloadData] then? Sure, why not. We take care not to use it inside the update block, per Apple's advisement, and simply add it after endUpdates. This time, good news! The section 0 header/footer disappears. :) However ... Toggling back to state one results in a most exquisite mess! The section 0 header returns, only to overlay the first row once again (instead of appear above it). The section 0 footer is placed below the last row just fine, but the overall table footer - now reinstated - overlays the section footer. Waaaaaah … now what? Just to be sure, let's toggle back to state two again. Yep, that looks fine. Coming back to state one? Yecccch. I also tried sprinkling in a few other stunts like using reloadSections:withRowAnimation:, but that only serves to make things worse. NSRange range = {0, 1}; NSIndexSet *indexSet = [NSIndexSet indexSetWithIndexesInRange:range]; ... [self.tableView reloadSections:indexSet withRowAnimation:UITableViewRowAnimationFade]; Case in point: If we invoke reloadSections... just before the end of the update block, changing to state two hides the first two rows from view, even though the space they would otherwise occupy remains. Switching back to state one returns section 0's header/footer to normal, but those first two rows remain invisible. Case two: Moving reloadSections... to just after the update block but before reloadData results in all rows becoming invisible! (I refer to the row as being invisible because, during tracing, tableView:cellForRowAtIndexPath: is returning bona-fide cell objects for those rows.) Case three: Moving reloadSections... after tableView:cellForRowAtIndexPath: brings us a bit closer, but the section 0 header/footer never returns when switching back to state one. Hmm. Perhaps it's a faux pas using both reloadSections... and reloadData, based on what I'm seeing at trace-time, which brings us to: Case four: Replacing reloadData with reloadSections... outright. All cells in state two disappear. All cells in state one remain missing as well (though the space is kept). So much for that theory. :) Tracing through the code, the cell and view objects, as well as the section heights, are all where they should be at the opportune times. They just aren't rendering sanely. So, how to crack this case? Clues welcome/appreciated!

  Read the article

• Hyper-V File Server Clustering - at my wit’s end

  - by René Kåbis

  I am at my wit’s end with File Server clustering under Hyper-V. I am hoping that someone might be able to help me figure out this Gordian Knot of a technology that seems to have dead ends (like forcing cluster VMs to use iSCSI drives where normally-attached VHDX drives could suffice) where logic and reason would normally provide a logical solution. My hardware: I will be running three servers (in the end), but right now everything is taking place on one server. One of the secondary servers will exist purely as a witness/quorum, and another slightly more powerful one will be acting as an emergency backup (with additional storage, just not redundant) to hold the secondary AD VM and the other halves of a set of clustered VMs: the SQL VM and the file system VM. Please note, these each are the depreciated nodes of a cluster, the main nodes will be on the most powerful first machine. My heavy lifter is a machine that also contains all of the truly redundant storage on the network. If this gives anyone the heebie-geebies, too bad. It has a 6TB (usable) RAID-10 array, and will (in the end) hold the primary nodes of both aforementioned clusters, but is right now holding all VMs. This is, right now: DC01, DC02, SQL01, SQL02, FS01 & FS02. Eventually, I will be adding additional VMs to handle Exchange, Sharepoint and Lync, but only to this main server (the secondary server won't be able to handle more than three or four VMs, so why burden it? The AD, SQL & FS VMs are the most critical for the business). If anyone is now saying, “wait, what about a SAN or a NAS for the file servers?”, well too bad. What exists on the main machine is what I have to deal with. I followed these instructions, but I seem to be unable to get things to work. In order to make the file server truly redundant, I cannot trust any one machine to hold the only data store on the network. Therefore, I have created a set of iSCSI drives on the VM-host of the main machine, and attached one to each file server VM. The end result is that I want my FS01 to sit on the heavy lifter, along with its iSCSI “drive”, and FS02 will sit on the secondary machine with its own iSCSI “drive” there as well. That is, neither iSCSI drive will end up sitting on the same machine as the other. As such, the clustered FS will utterly duplicate the contents of the iSCSI drives between each other, so that if one physical machine (or the FS VM) goes toes-up, the other has got a full copy of the data on its own iSCSI drive. My problem occurs when I try to apply the file server role within the failover cluster manager. Actually, it is even before that -- it occurs when adding the disks. Since I have added each disk preferentially to a specific VM (by limiting the initiator by DNS hostname, and by adding two-way CHAP authentication), this forces each VM to be in control of its own iSCSI disk. However, when I try to add the disks to the Disks section of Storage within Failover Cluster Manager, the entire process fails for a random disk of the pair. That is, one will get online, but the other will remain offline because it does not have the correct “owner node”. I mean, really -- WTF? Of course it doesn’t have the right owner node, both drives are showing the same node name!! I cannot seem to have one drive show up with one node name as owner, and the other drive show up with the other node name as owner. And because both drives are not “online”, I cannot create a pool to apply to a cluster role. Talk about getting stuck between a rock and a hard place! I’ve got more to add, but my work is closing for the day and I have to wrap things up. I will try to add more tomorrow morning when I get in. My main objective is to have a file server VM on each machine, the storage on each machine, but a transparent failover in case one physical machine fails. Essentially, a failover FS that doesn’t care which machine fails -- the storage contents are replicated equally on each machine. Am I even heading in the right direction?

  Read the article

• Linux IPTables / routing issue

  - by Jon

  Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

  Read the article

• howto only tunnel specific hosts route through openvpn client on tomato

  - by kcome

  I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

  Read the article

• make IIS 7.5 cache static content files over diferent pages

  - by Achilles

  On a Windows 2008 R2, using DNS and IIS I've established my development test server; i.e. I'll have a web application that I can browse on http://test.dev I've moved all the static content files like images, js files and css files into another application which is visible on http://cdn.test.dev test.dev, uses cdn.test.dev urls like http://cdn.test.dev/js/jquery.js to load js, css and images. When I first load "~/" of test.dev, all files will load with a response code of 200; when I press F5 in Firefox, all files, except the "~/default.aspx", will load with 304 response code; but pressing Ctrl+F5 loads them again with a 200 code; if I browse another url like "~/pages/" in test.dev, all of those static files will reload with a 200 code... Is this normal or I'm doing something wrong? Actually, I'm looking for a behavior like this: I want the client to load http://cdn.test.dev/js/jquery.js, only once. I want the client's browser to use this jquery.js file, from cache, in all other pages of test.dev Is this possible? This is the web.config file I have in the root directory of cdn.test.dev: <configuration> <system.webServer> <caching> <profiles> <add extension=".png" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".gif" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".jpg" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".js" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".css" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".axd" kernelCachePolicy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> </profiles> </caching> <httpProtocol allowKeepAlive="true"> <customHeaders> <add name="Cache-Control" value="public, max-age=31536000" /> </customHeaders> </httpProtocol> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true"> <remove name="RadUploadModule" /> <remove name="RadCompression" /> <add name="RadUploadModule" type="Telerik.Web.UI.RadUploadHttpModule" preCondition="integratedMode" /> <add name="RadCompression" type="Telerik.Web.UI.RadCompression" preCondition="integratedMode" /> </modules> <handlers> <remove name="ChartImage_axd" /> <remove name="Telerik_Web_UI_SpellCheckHandler_axd" /> <remove name="Telerik_Web_UI_DialogHandler_aspx" /> <remove name="Telerik_RadUploadProgressHandler_ashx" /> <remove name="Telerik_Web_UI_WebResource_axd" /> <add name="ChartImage_axd" path="ChartImage.axd" type="Telerik.Web.UI.ChartHttpHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_Web_UI_SpellCheckHandler_axd" path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_Web_UI_DialogHandler_aspx" path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_RadUploadProgressHandler_ashx" path="Telerik.RadUploadProgressHandler.ashx" type="Telerik.Web.UI.RadUploadProgressHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_Web_UI_WebResource_axd" path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource" verb="*" preCondition="integratedMode" /> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="10485760" /> </requestFiltering> </security> <staticContent> <clientCache cacheControlMode="UseExpires" httpExpires="Wed, 01 Jan 2020 00:00:00 GMT"/> </staticContent> </system.webServer> <appSettings /> <system.web> <compilation debug="false" targetFramework="4.0" /> <pages> <controls> <add tagPrefix="telerik" namespace="Telerik.Web.UI" assembly="Telerik.Web.UI" /> </controls> </pages> <httpHandlers> <add path="ChartImage.axd" type="Telerik.Web.UI.ChartHttpHandler" verb="*" validate="false" /> <add path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler" verb="*" validate="false" /> <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" /> <add path="Telerik.RadUploadProgressHandler.ashx" type="Telerik.Web.UI.RadUploadProgressHandler" verb="*" validate="false" /> <add path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource" verb="*" validate="false" /> </httpHandlers> <httpModules> <add name="RadUploadModule" type="Telerik.Web.UI.RadUploadHttpModule" /> <add name="RadCompression" type="Telerik.Web.UI.RadCompression" /> </httpModules> <httpRuntime maxRequestLength="10240" /> </system.web> </configuration> and this is the resulting response header for http://cdn.test.dev/css/global.css: Cache-Control: private,public, max-age=31536000 Content-Type: text/css Content-Encoding: gzip Expires: Wed, 01 Jan 2020 00:00:00 GMT Last-Modified: Mon, 06 Sep 2010 08:53:06 GMT Accept-Ranges: bytes Etag: "0454eca04dcb1:0" Vary: Accept-Encoding Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 06 Sep 2010 14:57:08 GMT Content-Length: 4495

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261  | Next Page >