Search Results

Search found 12079 results on 484 pages for 'secondary ip'.

Page 255/484 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• Can't set correct desktop resolution on Windows 7 after playing Mirror's Edge

  - by DeadMG

  Ever since I launched Mirror's Edge, my entire system seems to think that my monitor is 1600x1200, when actually it's 1920x1080. The game would only go up to 1600x1200, Windows will only go up to 1600x1200, and even my video drivers will only go up that high. The monitor isn't even that aspect ratio. I've rebooted the system to no effect, and installed the latest graphics drivers for my Radeon 5770, unplugged it and re-plugged it, etc. My secondary screen is still working perfectly correctly. Any suggestions?

  Read the article

• D Link DSL G624T Router will work wirelessly but not via cable

  - by Andy Fensome

  I have a D Link router which works in providing a wireless internet connection for my main PC and secondary notebook. I have been advised that the internet connection to the main pc will be better if I wire the router directly to the PC. I have tried this and can not get a connection. I just keep getting the message network cable unplugged. I have had the ethernet adaptor checked out on the pc and the cable is good ( also checked out). Anything I can do or do I have a bad router. I have tried the cable in all 4 ports and the message is still the same.

  Read the article

• Windows 7 slowing down during hard drive activity

  - by Iniquities of evil men

  Sometimes when normally using my PC, it will (seemingly) randomly slow down, and maybe sometimes even freeze for several seconds. During this slow down period, it looks like a (I don't know which drive it is) hard drive is constantly being written to. During the last slow down, I started Windows's Ressource Monitor and found out that the System process was writing up to 10MB/s to a drive (I suspect it's the system drive, C:\, but I don't know for sure). I'm not doing anything unusual (at least, I don't think I am), and most of the time, it will work normally, but, as I said, it just randomly slows down for some times. Any ideas on what might be causing this and how I can prevent this from happening again? (I have a triple-core processor and 4GB of RAM. My system drive is a WD Caviar Black 500GB, my secondary, 'data' drive is a Samsung drive, which I don't know the model number of, but I can look it up. I can also post my full PC specs if needed.)

  Read the article

• Gnome+NX clipboard behavior; auto-copy on select?

  - by threecheeseopera

  I am having issues with the Gnome(/Linux/Debian+Ubuntu) clipboard when connected remotely; it's default behavior appears to be to automatically add text to a clipboard buffer when that text is selected. This is not usually a problem, until I need to log into one of these systems remotely (w/ GUI), and attempt to use a shared clipboard. If I 'copy' text on the local machine (destined to replace some text on the remote machine), that copy buffer is overwritten as soon as I select the text on the remote machine to be replaced. Is there some way around this? It sort of drives me nuts. Thanks! UPDATE: This is really an NX server issue; X11 supports multiple clipboards ("selections": clipboard, primary. secondary; see this excellent article) that behave differently, and it appears that my problem is related to how NX server translates this over to the host machine.

  Read the article

• Is it better to use a crowded 2.4GHz Wi-Fi channel 1, 6, 11 or "unused" 3, 4, 8, or 9?

  - by Luke

  I understand that 2.4GHz Wi-Fi channels overlap, and that the only non-overlapping channels in the US are 1, 6, and 11. Generally, my signal strength on channels 1, 6, and 11 are much stronger than my neighbors' on the same channel. However, several of the channels may have 4 or 5 others on that same channel. In this scenario, is it better to use 3, 4, 8, or 9? Or is it better to use the crowded channels 1, 6, and 11? As a secondary question, does it even matter that my signal strength is much higher than theirs? Related: Why use wifi channels other than 1, 6 or 11?

  Read the article

• transparently set up Windows 7 as remote workstation

  - by Áxel

  Maybe is a very basic question, but I can't find the exact terms to Google for it and find the concrete answer to my doubt. Suppose we have several PCs in which individual employees work. One of them has an extremely powerful CPU, and it's very useful to use that computer to perform heavy computations, but go there and set up your task means its user has to stop working for a while. Is it possible to allow a secondary user account to remotly log in, for example via Remote Desktop, and work with a full user environment, while the main user keeps working under his user session? I've used remote desktop many times in the past, but it always blocked current user session, or even terminated it. Lots of thanks in advance guys.

  Read the article

• What are the major distinctions between PureDarwin and FreeBSD?

  - by ??????? ???????????

  I'm looking to install a different unix on my workstation to acquire some perspective on GNU/Linux and out of curiosity. I have narrowed my options down to these two. The reason for considering PureDarwin is because I have very little experience with Apple's products. So my question is will installing and using PureDarwin give me a closer understanding of OSX than would running FreeBSD? What I have in mind are day to day routines like adding users, installing software and configuring various aspects of the underlying OS. I know that the GUI of OSX would not be available, but that is not a concern. As a secondary, less important question, can I buy OS X in the apple store and run it in a virtual machine or does that violate their EULA?

  Read the article

• How can I get my email to go to Gmail and my hosted server?

  - by Joseph

  I've switched my main domain to point the MX to Google Apps, and my actual domain's server with the lowest MX priority. My idea is to have my primary emails on Google Apps, where the secondary are via Cpanel. Is this even possible? Currently MX records read: 0 Google 4 Google 4 Google 9 Google 9 Google 10 My server I have [email protected] which is added in G. Apps, and [email protected] which is only added in cpanel. Is there anyway to get this to work?

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• Netbook recomendations for a developer

  - by Joe

  I am thinking about getting a netbook for a secondary laptop. Ideally it would mainly be used for surfing/email/travel, but I would like it to be good enough to be able to run Visual Studio for when I am at conferences and the like. I as thinking it would be nice to be able to put a 16-32GB SSD in it, as well as 2GB of memory. Do you have any recomendations? Will a netbook even suffice, or should I upgrade to a small-form laptop? Edit: I don't need to be able to build software on it. It would just be nice to occasionally be able to try out new tools, APIs, or what have you without getting frustrated due to limited computing power.

  Read the article

• What laptops can run an external 27" or 30" screen at 2560x1600 native resolution? [closed]

  - by Moin Zaman

  SU Folks, What laptops do you know off that can run a 27" or 30" external monitor as a secondary display (Extending desktop onto second screen, without switching off the laptop's own built in screen) at the screens native resolution of 2560x1600. I'm not interested docks or USB video adapters etc. Just via the laptop's built in display ports. List the port used and cable as well if possible. Reference links / posts that confirm it are an added bonus. I'm hoping people who've tried it themselves and / or confirmed it can list specific models of laptops so we can build up a good list.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Why is my PC boot time slow when USB HDD attached?

  - by John

  I have a USB Hard disk that I am using as a secondary drive just for extra storage. When this is attached and I start my PC the second screen says searching for mass storage dives for about 5 minutes before continuing on. The same happens when I have a USB pen disk attached upon boot. If I attach the device after the PC has loaded then it is very quick however plugging and unplugging is not ideal. Is there away to disable this in the BIOS as I cannot instantly see an option. On boot it informs me I have an American Trends AMIBIOS in the BIOS setup it states the version as v02.58 2006. This is running on a ASUS MV2 Motherboard.

  Read the article

• Second vm not connecting to internet KVM

  - by potsed

  I cannot connect a second VM to the internet. I have two VM's set up and running, the first vm can connect to the Internet fine, the second does not even get a ping through. They are both set up in the same way with the same base packages but different secondary packages. Different sized disks etc. I am a noob with VM and perhaps I am missing something very simple. Like maybe that they have the same mac address or something. They are both using a bridged connection. Any help would be appreciated, and if you need logs please let me know which ones.

  Read the article

• mongodb replication: no primary elected

  - by Max

  I have three servers with mongod installed on it running as a replication set. Suddenly the two secondories became unavailable (the mongod process died) - I think because they were too stale. The problem is that the original PRIMARY is now the SECONDARY and my application doesn't work because it can't connect to a PRIMARY. I mean, in which way does that help me? If the replica set can't do failover?! Am I missing something? Furhtermore I am asking myself why did the SECONDARIES die / why are they too stale? What can I do about it? FYI: My database is quite big (40GB on disk).

  Read the article

• Windows Recovery partition unusable after Ubuntu 12.04 install on Eee PC 1005P

  - by Crivat Camilar

  Installed Ubuntu 12.04 over the secondary (D:) partition with Grub2 handling multi-boot. Never accessed the 'Recovery' option in the boot menu until Windows7 Starter became unusable due to HDD failure (bad sectors on C:). Tried creating an USB recovery stick using the OEM's recovery application (F9) on hidden partition: all I got was a clean C:\ and an error telling me the recovery images cannot be found [R:\recovery\windowsre\ - or something very much like that] although everything is there (changed 'hidden' flag to check and copy contents). Nothing happens upon pressing F9, then Grub takes over giving the recovery option. The application starts but halts about 30s after initializing, very briefly displaying the error message above. I guess every time it goes through this it actually wipes C:\ but crashes immediately afterwards not being able to find what-ever .wim image files it needs. How to make it work?

  Read the article

• Setting Up DHCP Server as Failover

  - by Jason Buhagiar

  I have 2 Domain Controllers running at my company; DC1 has the following roles; ADDS DNS DHCP Scope - 192.168.2.100 - 192.168.2.240 DC2 has the following roles; ADDS - Replicated DNS - Secondary DNS I also have 2 PFSense Gateways both have a different ISP Connection, DHCP Relay is not enabled on any of the machines. Can anyone suggest a way for me to install DHCP Server as FAilover on DC2 please, should I use split scope etc... Help is much appreciated :) Thanks.

  Read the article

• GPO errors filling up event viewer

  - by burntehsky

  there have been a few issues with the server i have been working on i check the event viewer and it is filled with the errors below i was not sure how to go about fixing this i looked in the path where the file is and it is there Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ISPHOME,DC=NET. The file must be present at the location <\\isphome.net\\sysvol\ISPHOME.NET\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (The network location cannot be reached. For information about network troubleshooting, see Windows Help. ). Group Policy processing aborted. C:\Documents and Settings\Dimitri>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : ispserver Primary Dns Suffix . . . . . . . : ISPHOME.NET Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : ISPHOME.NET Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection #2 Physical Address. . . . . . . . . : 00-07-E9-AA-3E-C3 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 127.0.0.1 *dcdiag /c /v is below* Summary of test results for DNS servers used by the above domain contro llers: DNS server: 192.168.1.1 (<name unavailable>) All tests passed on this DNS server This is a valid DNS server DNS server: 192.168.1.50 (<name unavailable>) All tests passed on this DNS server This is a valid DNS server Name resolution is funtional. _ldap._tcp SRV record for the fores t root domain is registered Summary of DNS test results: Auth Basc Forw Del Dyn RReg Ext ________________________________________________________________ Domain: ISPHOME.NET ispserver PASS FAIL PASS PASS PASS PASS n/a ......................... ISPHOME.NET failed test DNS

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• How to set up an extended desktop on dual monitors in Kubuntu 9.04?

  - by Dennis

  I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

  Read the article

• How can I run fsck on a disk image via Mac Terminal?

  - by mvizual

  I want to run fsck on a disk image before I use it to restore (replace) a corrupted volume. Using Terminal, what would be the proper command, syntax, and options for this operation? I've just recently become acquainted with Terminal and line commands, so syntax and specific options aren't part of my computing vocabulary. I'm using Terminal 2.1.2, bash, OS 10.6.8. Ultimately, I'm trying to restore an image to a secondary startup volume (external drive). The image is mounted on my desktop and I want to check it for errors before I use it. Disk Utility runs "repair disk" successfully but the integrity of the image is suspect.

  Read the article

• Synergy: How to screen positioning configuration while it is running?

  - by Brandon

  I am using Synergy between two Macbooks (10.6 & 10.7). Installed using homebrew, version '1.3.6p2' from I will sit in various places in relation to the secondary laptop, so sometimes I want the other screen to be on the right of my main screen and sometimes to the left. How can I reconfigure this without shutting down synergys, changing the config file, and restarting the server and the client? Ideally it will be a terminal command so I can easily assign it to a keyboard shortcut. Thanks!

  Read the article

• Manage 2 displays remotely

  - by neurino

  I have a pc with a nVidia Quadro graphic card. The card has 2 DisplayPort outs where 2 40" Full HD TV are connected. I need to run 2 separate fullscreen videos, one each display. The problem is displays are far from the pc station and I cannot control them from there. I tried with a remote desktop connection but when I connect screen 1 shows login and screen 2 simply blackens (I'm logged off). The pc, an HP, also has his native graphics card still installed it would be nice if I could connect there a 15" monitor with the desktop on and use the TVs only as secondary where I can send fullscreen videos. Any clue?

  Read the article

• Windows 7 treating my third monitor as an extension to my second rather than detecting it as a stand alone

  - by user331837

  I am trying to attach a third monitor to my PC, however I am coming across a rather strange issue. Windows screen resolution is still only showing that I have two monitors connected, but the second has been extended over both the second and third monitors. Basically, it shows as the main display being a normal size, and the secondary as being twice as long as normal. I have my main connected via a the display port, and the second and third are using two of the three mini HDMI ports my video card provides. How do I get windows to accept my third monitor the same as it does my second?

  Read the article

• How do I sync a subset of tables between two databases on the same mysql database server

  - by Mike

  would like to be able to sync a subset of tables between two mysql databases that are running on the same server. One of the databases acts as the master where inserts, updates and deletes can be made. The second database uses those same tables for read-only operations. I do not want to use federated tables to achieve this. The long term goal will be to separate the 2 databases to multiple servers, The second database that has the subset of tables as read-only may also be replicated a few times over to distribute geographically for load and performance purposes each with unqiue data.... Once that is achieved, I plan to use binlog to replicate those specific tables on the secondary databases. In the meantime, I'd like to keep these tables in sync. Is there a more elegant way to do this than other than using a cronjob and mysqldump?

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >