Search Results

Search found 28922 results on 1157 pages for 'ubuntu gnome remix'.

Page 255/1157 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• How do I add color syntax highlighting to GNU emacs?

  - by Alex Reynolds

  I have two versions of emacs available to me on a locked workstation: $ /usr/local/bin/emacs --version GNU Emacs 22.3.1 $ /usr/bin/emacs --version GNU Emacs 21.4.1 In both cases, my terminal type is xterm when I run either version of emacs. When I run the v21 version of emacs, I get syntax coloring for Perl, HTML, and other modes. When I run the v22 version, I do not get syntax coloring. I would like to migrate from the v21 version because the combination of v21 emacs, GNOME Terminal and GNU Screen is eating Ctrl-arrow key chords, which prevents me from moving quickly between words. (OS X Terminal and GNU Screen do not have this issue.) The v22 version allows use of Ctrl-arrow key combinations with GNOME Terminal and GNU Screen. How do I fix the v22 version (or ask my sys admin to fix) so that it once again highlights syntax and allows me to use Ctrl-arrow key combinations?

  Read the article

• starting oracle 10g on ubuntu, Listener failed to start.

  - by tsegay

  I have installed oracle 10g on a ubuntu 10.x, This is my first time installation. After installing I tried to start it with the command below. tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1/bin$ lsnrctl LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-DEC-2010 22:46:51 Copyright (c) 1991, 2005, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> start Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.1.0 - Production System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) TNS-12555: TNS:permission denied TNS-12560: TNS:protocol adapter error TNS-00525: Insufficient privilege for operation Linux Error: 1: Operation not permitted Listener failed to start. See the error message(s) above... my listener.ora file looks like this: # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = acct-vmserver)(PORT = 1521)) ) ) I can guess the problem is with permission issue, But i dont know where I have to do the change on permission. Any help is appreciated ... EDIT## When i run with the command sudo, i got this tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1$ sudo ./bin/lsnrctl start LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-DEC-2010 01:01:03 Copyright (c) 1991, 2005, Oracle. All rights reserved. Starting ./bin/tnslsnr: please wait... ./bin/tnslsnr: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Linux Error: 32: Broken pipe

  Read the article

• Correctly setting up UFW on Ubuntu Server 10 LTS which has Nginx, FastCGI and MySQL?

  - by littlejim84

  Hello. I'm wanting to get my firewall on my new webserver to be as secure as it needs to be. After I did research for iptables, I came across UFW (Uncomplicated FireWall). This looks like a better way for me to setup a firewall on Ubuntu Server 10 LTS and seeing that it's part of the install, it seems to make sense. My server will have Nginx, FastCGI and MySQL on it. I also want to be allow SSH access (obviously). So I'm curious to know exactly how I should set up UFW and is there anything else I need to take into consideration? After doing research, I found an article that explains it this way: # turn on ufw ufw enable # log all activity (you'll be glad you have this later) ufw logging on # allow port 80 for tcp (web stuff) ufw allow 80/tcp # allow our ssh port ufw allow 5555 # deny everything else ufw default deny # open the ssh config file and edit the port number from 22 to 5555, ctrl-x to exit nano /etc/ssh/sshd_config # restart ssh (don't forget to ssh with port 5555, not 22 from now on) /etc/init.d/ssh reload This all seems to make sense to me. But is it all correct? I want to back this up with any other opinions or advice to ensure I do this right on my server. Many thanks!

  Read the article

• How to re-add a RAID-10 failed drive on Ubuntu?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• Issues with VSFTPD / FTP on Linux Ubuntu server - Steps for Troubleshooting?

  - by jnolte

  I am dealing with an issue I am unclear on how to resolve and have been pulling my hair out for some time. I have been trying to configure an FTP user using the following (we use this same documentation on all servers) Install FTP Server apt-get install vsftpd Enable local_enable and write_enable to YES and anonymous user to NO in /etc/vsftpd.conf restart - service vsftpd restart - to allow changes to take place Add WordPress User for FTP access in WP Admin Create a fake shell for the user add "usr/sbin/nologin" to the bottom of the /etc/shells file Add a FTP user account useradd username -d /var/www/ -s /usr/sbin/nologin passwd username add these lines to the bottom of /etc/vsftpd.conf - userlist_file=/etc/vsftpd.userlist - userlist_enable=YES - userlist_deny=NO Add username to the list at top of /etc/vsftpd.userlist restart vsftpd "service vsftpd restart" make sure firewall is open for ftp "ufw allow ftp" allow modify the /var/www directory for username "chown -R /var/www I have also went through everything listed on this post and no luck. I am getting connection refused. Sorry for the poor text formatting above. I think you get the idea. This is something we do over and over and for some reason it is not cooperating here. Setup is Ubuntu 12.04LTS and VSFTPD v2.3.5 Thank you in advance.

  Read the article

• Ubuntu 10.04->10.10 in failed state - how to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: (1) "Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a)." (2) "gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok]" (3) "gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ..." What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• Ubuntu server crashes; need help figuring how to figure out why

  - by neezer

  I have a 768 Slice at slicehost.com running Ubuntu Server 8.04.2 LTS (hardy) with a LAMP stack on it that periodically crashes, though why I am not sure. From what I can tell, there is a process that basically goes rogue and consumes all the memory on the slice, suffocating all the other programs running until the whole thing comes to a grinding halt, and I have to do a hard reboot of the slice to get it back up and running again. I can't detect any pattern for this (it seems to happen about once a month, more or less). Here's a screenshot of my console during the last crash: I would assume that a possible cause might a PHP script or an apache configuration rule that might cause the crash if triggered? How would I be able to find out which one is the offending one? I've checked and rechecked all my PHP scripts, and running them doesn't seem to trigger the crash. I've also been able to log on to my system during a crash and see what's running (with top), but I can't tell how the offending process was started, so I can't trace the root of the problem! I know my description is overly generic, but unfortunately my expertise in tracking down the source of these glitches is very limited. If you need any additional information about my system in order to help me figure this out, please let me know in the comments, and I will append it to the question. My only other lead as to the culprit here is Wordpress, which we have installed on this server. Here are the details: Wordpress 3.0.3 with the following plugins installed and activated: Addmarx - Bookmark/Share/Email Dropdown, Akismet, All in One SEO Pack, Animated Banners, Automatically publish highlights of any website, directly to your Blog, Broken Link Checker, CMS Dashboard, Collapsing Categories, Status Updater, SubHeading, Ultimate Google Analytics, VastSubCat, WP-CMS Post Control, and WP Super Cache

  Read the article

• Gnome 3 screensaver (not suspend) resume hook?

  - by Daniel

  Since whenever my laptop screen resumes sleeping (i.e. wakes up from screensaving) some settings are reset, such as keyboard backlight, I'd like to run some scripts each time this happens. I'm using gnome 3 with fedora 17 by the way. When researching this issue I came across pm-utils which allows one to hook anything to events handled by pm-utils but it seems to me monitor sleeping (i.e. screensaving) is not one of them. Looks like pm-utils only handles suspend and hybernate. So is there a way to hook up custom programs to screensaver?

  Read the article

• Is Ubuntu a viable replacement of Windows XP for small enterprise environments?

  - by Alex. S.

  Hi all, I'm a newbie systems administrator, so any advice would be great. I would like to setup ubuntu 8.04 lts in a small office of consulting in management (around 50 workstations) instead of Windows XP. I would install MS Office 2007 via WINE (*). It would be a fresh installation, so the migration would be less of a pain. The new setup would also include a small server as document repository and a backup server by now. Later, I would install another goodies like a IM server, a document management solution, and whatnot collaborative tool. What do you advice in this scenario? Do you think is viable? Should I try to convince my managers this is a good idea? I consider myself as a fair experienced user in both systems, and I'm the only guy in charge of everything. I need to cut costs down, and I think that antivirus and antimalware software are a waste of money and time. Is this good idea?, or should I resign and try to lock down the Windows systems and install AV software? Is there anything else in this setup I'm not foreseeing? (*) The only catch in my test machine until now had been that Office SmartArt doesn't work properly, the rest of Office 2007 may seem ok.

  Read the article

• Ubuntu "No space left on device" for /home, df shows 100% full, ds shows much, much less

  - by Jon Cram

  On an Ubuntu 12.04 server, normal users can no longer create or add to files in /home, encountering a "No space left on device" error. The /home directory has a capacity of 1.7 terabytes and as far as I can tell is nowhere near full in terms of actual data stored or inodes used. df -h shows: Filesystem Size Used Avail Use% Mounted on /dev/md2 1.0T 18G 955G 2% / udev 7.7G 4.0K 7.7G 1% /dev tmpfs 3.1G 320K 3.1G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.7G 0 7.7G 0% /run/shm cgroup 7.7G 0 7.7G 0% /sys/fs/cgroup /dev/md3 1.7T 1.7T 0 100% /home /dev/md1 496M 45M 426M 10% /boot /home indeed looks rather full. du -hs /home suggests otherwise: 1.4G /home There appears no inode issue - df -i: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md2 67108864 75334 67033530 1% / udev 2013497 527 2012970 1% /dev tmpfs 2015816 440 2015376 1% /run none 2015816 2 2015814 1% /run/lock none 2015816 1 2015815 1% /run/shm cgroup 2015816 9 2015807 1% /sys/fs/cgroup /dev/md3 113909760 105981 113803779 1% /home /dev/md1 131072 239 130833 1% /boot I recently deleted a many gigabytes of application cache and log data from /home, however this was in the tens of gigabytes at best and nowhere near the capcity of /home. Update 1: du -hs --apparent-size /home 1.2G /home du -hs /home 1.4G /home What might be going on here?

  Read the article

• Ubuntu in failed state after upgrade from 10.04 to 10.10 - How to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: 1. Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a). 2. gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok] 3. gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ... What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• Merely installing PHP5 causes my AWS Ubuntu server to die minutes later from a massive CPU spike

  - by Mark Amery

  I have an AWS server with Ubuntu 11.04 as the OS that is running an Apache2 webserver (incidentally Python-based and using Django). We recently needed to add support for php5 to let us use a third party PHP library (incidentally for serving minified versions of js and css files). However, for no reason any of us can discern, if we simply run sudo apt-get install php5 on the server, then the install appears to finish successfully but, without us taking any further action (including not yet running sudo apt-get install libapache2-mod-php5, which I think would be the next step for us if everything worked), or actually running any PHP scripts on the server, a few minutes later the server becomes impossible to connect to, and looking at the 'Monitoring' tab for the server in the EC2 Management Console reveals that a while after the installation, CPU usage spikes to 100% and stays there permanently (until we reboot the server from the AWS Console). After rebooting, the server also reliably dies within a few (between 0 and 10) minutes. We restored the server to a pre-PHP state from an AMI Image, observed that it was stable, and then tried installing PHP5 again and observed the server die in exactly the same way, so we're pretty much certain that installing PHP5 is what causes the symptoms. What on earth could be causing this behaviour, and how can we get PHP installed on the server without it dying?

  Read the article

• How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

  - by javadba

  I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

  Read the article

• Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

  - by daveaspinall

  I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

  Read the article

• Fastest reliable way to open the terminal?

  - by meder

  I actually had my SUPER_L ( left windows key ) binded to gnome-terminal, but for whatever reason ever since upgrading to 9.04 Ubuntu from 8.10 Intrepid it seemed to break the key binding. It was very handy because I could throw open the terminal with one key ( sorry but alt-f2 and typing gnome-terminal isn't practical for me ). Or perhaps it reset all the keybindings? I remember using xev and some gui type interface that was akin to Win32 registry editor. Anyway, I'm curious as to what you guys use to open the terminal.

  Read the article

• How to properly start gvfs without gnome?

  - by 9000

  I have a Debian testing box with Xfce (no Gnome, no Nautilus). It has all gvfs-related stuff installed, including all backends and fuse interface. But any attempts to gvfs-mount anything (like sftp://... or smb://...) fail with error opening file: Operation not supported, and gigolo shows only 'unix device (file)' in the list of supported protocols. My ~/.gvfs has rwx permissions, and I'm a member of fuse group; other fuse-related stuff works for me. What do I do? Where to look?

  Read the article

• How to change defaulp pdf viewer for all users in command line

  - by dodecaplex

  I'm using Debian squeeze with Gnome Desktop for all my users. I have a group of machines to set up so that all users should use xpdf as a default viewer (rather than evince). I want this set up to be done by command line (even better, using puppet). I know about xpg-mime command, but the man page says that the default command should not be used as root. I could manually tweek the /etc/gnome/defaults.list files, but I'm looking for a single command I could run to perform the setting without an editor interaction. Any idea ?

  Read the article

• Issue with SSH on Ubuntu - Local connection ok, remote connection - Is it me or my ISP?

  - by Benjamin

  I have an issue with a server running Ubuntu 12.04, I am trying to set up a remote connection so I can access the server at my work from out of town. I have installed the SSH server and all that stuff, and I have reassigned the default port from 22 to 3399. A local connection from any OS can connect on the 192.168... address, but in no way can I get a connection on the actual IP address. I believe my configuration is correct, and I will attach it. If I have done something wrong in the config, please tell me and I will make a change to it. I honestly think that the Router that my ISP provided is horrible, and although the port for ssh is forwarded, it might be stopping any traffic coming inbound. Is there anything I can try to verify this? /var/log/auth does not show any error when I connect VIA our static IP. I have included all values not commented out below: (sshd_config) Port 3399 ListenAddress 0.0.0.0 Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key UsePrivilegeSeparation yes KeyRegenerationInterval 3600 ServerKeyBits 768 SyslogFacility AUTH LogLevel INFO LoginGraceTime 120 PermitRootLogin yes StrictModes yes UseDNS no RSAAuthentication yes IgnoreRhosts yes RhostsRSAAuthentication no HostbasedAuthentication no PermitEmptyPasswords no ChallengeResponseAuthentication no PasswordAuthentication yes GSSAPIAuthentication no X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Am I doing this wrong? port forwarding image

  Read the article

• How do I set up Grub properly to quad-boot Windows, Mac OS X, Linux, and FreeBSD?

  - by Joe

  Grub has gone completely insane on me. My quad-boot system was working great up until I upgraded Ubuntu to 12.04. Since Ubuntu overwrote the Grub stuff I had to repair it with my Mac OS X and FreeBSD entries. After this, trying to boot Mac OS X gave me the error "couldn't open file" and FreeBSD gave the error "no such partition". Windows and Ubuntu worked fine. So I tried repairing again because I figured something must've gone wrong in the install process. Then only Ubuntu would boot. Trying to boot Windows would give me the error "no argument specified". I tried repairing Grub once again, since I seemed to be getting different results each time. This time, Ubuntu no longer appeared in the Grub menu, and the errors for the other OSes were the same. So I booted into the Ubuntu 12.04 live CD and ran Boot-Repair with recommended settings. Now Grub is completely skipped and Windows boots up. I have absolutely no idea what is going on or why I get different results every time I reinstall Grub. Here is how my partitions are set up: sda1 - Storage drive, sdb1 - Windows, sdb2 - Mac OS X, sdb3 - FreeBSD, sdb4 - Extended, sdb5 - Ubuntu, sdb6 - Shared storage, sdb7 - Shared Storage, Here's my grub.cfg file: grub.cfg

  Read the article

• How can I get OS/X-like switch windows of same program bound to hotkey with linux GUIs?

  - by dbenhur

  On OS/X, Command-~ switches between windows associated with the program with current focus. This is very handy when toggling through a set of browser windows or editor windows, for example. A couple years ago I noticed someone using similar functionality on a Gnome linux laptop and they showed me how to set it up, but I forgot the details (so I know it's possible). I frequently switch between MacBook and a variety of linux systems running Gnome, Unity, and occasionally KDE. My Google-fu failed so I turn to stack exchange: How do I bind Alt-~ or similar key to give me functionality to switch between windows of program with current focus?

  Read the article

• How to find the reason for a weekly downtime on an Ubuntu web server hosted by AWS?

  - by IceSheep

  We started monitoring our web server using Pingdom and found out that we have a downtime of a few minutes every Sunday at 0:00 UTC. The test runs every minute and checks if a successful HTTP response (code 200) is returned on port 80. The test fails due to a timeout (no response after 30 seconds). Here's what we've already checked – without success: Since we run our webserver behind a load balancer, I've set the Pingdom test on the load balancer's public DNS and the webserver's public DNS in order to find out if there's a problem with the AWS load balancer – both tests return the same result We set up Munin on our webserver. Everything looked fine even after the failure. Since the last failure lasted only 2 minutes I suppose Munin couldn't capture a potential problem (it only checks every 5 minutes) I have checked /var/log/apache2/error.log and /var/log/syslog for suspicious entries I have checked /etc/cron.weekly and /etc/crontab for suspicious entries I have searched for files created or last-modified during 0:00 and 0:15 using this method: touch -t 201209020000 start touch -t 201209020015 end find / -newer start -and ! -newer end (nothing found) Has anybody experienced a similar problem? Any proposals on how to find the reason for this behavior? It's Ubuntu 10.04 LTS running on an AWS m1.large instance. Thanks!

  Read the article

• Why is /dev/urandom only readable by root since Ubuntu 12.04 and how can I "fix" it?

  - by Joe Hopfgartner

  I used to work with Ubuntu 10.04 templates on a lot of servers. Since changing to 12.04 I have problems that I've now isolated. The /dev/urandom device is only accessible to root. This caused SSL engines, at least in PHP, for example file_get_contents(https://... to fail. It also broke redmine. After a chmod 644 it works fine, but that doesnt stay upon reboot. So my question. why is this? I see no security risk because... i mean.. wanna steal some random data? How can I "fix" it? The servers are isolated and used by only one application, thats why I use openvz. I think about something like a runlevel script or so... but how do I do it efficiently? Maby with dpkg or apt? The same goes vor /dev/shm. in this case i totally understand why its not accessible, but I assume I can "fix" it the same way to fix /dev/urandom

  Read the article

• Install KVM based Windows 2008 remotely over SSH on a headless, no graphics Ubuntu 10.04 server?

  - by taazaa

  Hi, I have a Dell server at a remote data center with Ubuntu 10.04 as the host. It is a minimal install with the necessary virtulization packages. There is no X and the machine is headless. I have the win2008 DVD in the machine and want to remotely install it. I tried: virt-install --connect qemu:///system -n vmwin2k8 -r 1024 --disk path=server2k8.qcow2,size=50 --cdrom /dev/sr0 --vnc --noautoconsole --os-type windows --os-variant win2k8 The qcow2 image get created However I don't understand how to connect to see the install via VNC. This is my first time doing it so it may be trivial or may not be possible. Remotely I have a Win 7 machine with Putty and RealVNC viewer. Where is the graphic output of VNC going? Do I have to have VNC server running on the host or some other machine and then connect to it from my VNC client? Please let me know or point me to the right direction. I have been searching the web for several days to figure out how this is suppose to work. Thanks!

  Read the article

• Using Plesk for webhosting on Ubuntu - Security risk or reasonably safe?

  - by user66952

  Sorry for this newb-question I'm pretty clueless about Plesk, only have limited debian (without Plesk) experience. If the question is too dumb just telling me how to ask a smarter one or what kind of info I should read first to improve the question would be appreciated as well. I want to offer a program for download on my website hosted on an Ubuntu 8.04.4 VPS using Plesk 9.3.0 for web-hosting. I have limited the ssh-access to the server via key only. When setting up the webhosting with Plesk it created an FTP-login & user is that a potential security risk that could bypass the key-only access? I think Plesk itself (even without the ftp-user-account) through it's web-interface could be a risk is that correct or are my concerns exaggerated? Would you say this solution makes a difference if I'm just using it for the next two weeks and then change servers to a system where I know more about security. 3.In other words is one less likely to get hacked within the first two weeks of having a new site up and running than in week 14&15? (due to occurring in less search results in the beginning perhaps, or for whatever reason... )

  Read the article

• Can you explain how to understand what the 'iwconfig' command displays in Ubuntu-9.04?

  - by Shawn

  I'm having trouble making my wireless connection work, and I realized I don't really know how to use the tools I have, in this case, the iwconfig command in Ubuntu-9.04. Here is what I get: ***iwconfig*** - lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Network" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 vboxnet0 no wireless extensions. pan0 no wireless extensions. "Network" is the name of my wireless network, btw. But what does this all mean? How can this information help me aquire a working wireless connection? When I try associating a key using sudo iwconfig wlan0 key s:my_key I get the following error message: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. I do have the right key though, so what's the problem?

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >