Search Results

Search found 7676 results on 308 pages for 'delphi 2012'.

Page 257/308 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • Ubuntu Server Cannot Route to the Internet

    - by ejes
    I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

    Read the article

  • Sustainability Activities at Oracle OpenWorld

    - by Evelyn Neumayr
    Close to 50,000 participants will come to San Francisco for Oracle OpenWorld and JavaOne events, held September 30-October 4, 2012 at Moscone Center. Oracle is very conscious of the impact that these events have on the environment and, as part of its ongoing commitment to sustainability, has developed a sustainable event program-now in its fifth year-that aims to maximize positive benefits and minimize negative impacts in a variety of ways. Click here for more details. At the Oracle OpenWorld conference, there will be many sessions and even a hands-on lab which discuss the sustainability solutions that Oracle provides for our customers. I wanted to highlight a few of those sessions here so if you will be at Oracle OpenWorld, you can make sure to attend them. One of the most compelling sessions promises to be our “Eco-Enterprise Innovation Awards and the Business Case for Sustainability” session on Wednesday, October 3 from 10:15 a.m. to 11:15 a.m. in Moscone West 3005. Oracle Chairman of the Board Jeff Henley, Chief Sustainability Officer Jon Chorley, and other Oracle executives will honor select customers with Oracle's Eco-Enterprise Innovation award. This award recognizes customers and their respective partners who rely on Oracle products to support their green business practices in order to reduce their environmental impact, while improving business efficiencies and reducing costs. Another interesting session is the “Tracking, Reporting, and Reducing Environmental Impact with Oracle Solutions” which occurs on Monday, October 1 from 4:45 p.m. to 5:45 p.m. in Moscone West Room 2022. This session covers Oracle’s overall sustainability strategy as well as Oracle Environmental Accounting and Reporting (EA&R), which leverages Oracle ERP and BI solutions for accurate, efficient tracking of energy, emissions, and other environmental data. If you want more details, make sure to visit the hands-on lab titled “Oracle Environmental Accounting & Reporting for Integrated Sustainability Reporting”. This hour-long lab will take place on Tuesday, October 2 at 5:00 p.m. in the Marriott Marquis Hotel-Nob Hill CD. Here you can learn how to use Oracle EA&R to collect sustainability-related data in an efficient and reliable manner as part of existing business processes in Oracle E-Business Suite or JD Edwards Enterprise One. Register for this hands-on lab here.  

    Read the article

  • OBIEE 11.1.1.5.0 Bundle Patch 2 is available

    - by mshahi
    Oracle BI EE 11.1.1.5.0 Bundle Patch 2 is available. The Patch number is 13611078 and it can be downloaded from Oracle Support (you can download it without password). This patch currently is available on Microsoft Windows x64 (64 bit), Linux x86 - 64 bit, IBM AIX on Power System (64 bit) and Oracle Solaris Sparc (64 bit). Remaining four platforms Win32, Linux32, HP-Itanium, and Solaris x86-64 are expected 3-4 weeks later. This Patch has thoroughly been tested and signed off by BI QA Team.  Important things to know: 1. All the customers are advised to apply this patch as it contains around 248 bug fixes. Please read the README file for all the bug fixes contained in this patch.   2. This patch can be applied via opatch. Please follow the standard process of applying this patch using opatch, i.e. stop all BI System processes via opmnctl, Stop WLS Managed and Admin Servers, Apply Patch, Start WLS Admin and Managed Servers, Check if all the J2EE applications are running fine, Start all BI System Processes via opmnctl command, and verify your fixes. It is advised to test this patch on Non Productions Instances first, run all the required tests / regressions and then move it to Production.    3. This Bundle Patch is cumulative to 11.1.1.5.0 BP1 (13562882) which was released in January 2012 on Linux x86 - 64 bit which contained around 64 bug fixes. Customers who have applied 11.1.1.5.0 BP1, will get expected OPatch conflict message, they can safely roll back BP1 prior to installing this BP2 or let opatch roll back BP1 during its application process.   4. Customer who have applied some one off patches and these one off patches are also part of 11.1.1.5.0 BP2, they can also roll back their existing one off patches after confirming that their fixes are part of BP2.    5. This Bundle Patch is not cumulative on top of 11.1.1.5.0, meaning this bundle patch does not contain all the one off fixes that were delivered on top of 11.1.1.5.0. All the remaining one off fixes delivered so far, will be available in next scheduled bundle patch i.e. 11.1.1.5.0 BP3. Please check the README file and let support know if your existing fixes are not part of BP2, so that support can open One Off Backport (OOB) request to have them included in next patch i.e. BP3.   6. 11.1.1.5.0 BP3 is in planning stages, and dates for it's availability will be announced in next couple of weeks.

    Read the article

  • MySQL Connect - Save The Date!

    - by Bertrand Matthelié
    @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } Oracle today announced that it will hold the MySQL Connect Conference on September 29 and 30 in San Francisco! You can read the Press Release here. MySQL Connect will be jam-packed with technical sessions, hands-on labs and Birds of a Feather (BOF) sessions delivered by MySQL community members, users, customers and MySQL engineers from Oracle. The event is a unique opportunity to learn about the latest MySQL features, discuss product roadmaps, and connect directly with the engineers behind the latest MySQL code. The conference will include six tracks: Performance and Scalability, High Availability, Cloud Computing, Architecture and Design, Database Administration, and Application Development. The call for papers will open on April 16, 2012 for approximately three weeks. MySQL users and community members are encouraged to submit session proposals. Start thinking about your proposals! Registration will also open on April 16. @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }p.pressBullet, li.pressBullet, div.pressBullet { margin: 0cm 0cm 0.0001pt 36pt; text-indent: -18pt; font-size: 11pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }

    Read the article

  • Live Virtual Class for Partners: Application Management

    - by Patrick Rood
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} November 11-12th Manageability Partner Community Application Management Suite Live Virtual Training This training will be offered to Oracle Partners over a live webcast during business hours. Each day will consist of approximately 2-3 hours of lecture/demos. It will be recorded and available for playback. Purpose: This virtual course is a comprehensive program of training sessions, prepared and presented by Product Managers. This ensures you have all the information you need to position and sell Oracle Application Management Suites. The sessions will be lecture based with demonstrations to complement. These sessions are interactive and everyone will be required to participate. Customer case studies will be used as appropriate and there will be plenty of opportunity for in-depth discussion. Please bring to the training an understanding of what Enterprise Manager 12c does for our customers, along with your own experiences to date. Logistics: Topic: Oracle Application Management Suite Training (2 Days - approx 2-3 Hour per Day) WebEx session details to be provided upon registration. Monday 11th November | 14:00PM GMT | 18:00PM Gulf (GMT+4) Tuesday 12th November | 14:00PM GMT | 18:00PM Gulf (GMT+4) (Back to the top) Copyright © 2012, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

    Read the article

  • Are there any drawbacks to the Major.Minor.YMDD.Build version strategy?

    - by Chu
    I'm trying to come up with a good version strategy to fit our specific needs. We've proposed settling on this and I wanted to ask the question to see if anyone's experience would suggest avoiding this or altering it in any way. Here's our proposal: Versions are released in this format: MAJOR.MINOR.YMDD.BN. Here it is broken out: MAJOR & MINOR are typical; we'll increase MINOR when we feel code and new feature sets warrants it; once every few months most likely. MAJOR will increase ~yearly. YMDD: Y will be the last digit of the current year, so "1" for 2011, "2" for 2012, etc. A non-padded month will be used to keep the number smaller (9 instead of 09 for example). DD of course is the day, padded with a zero for days under 10. BN: BN is the build number and increases by one anytime we make a change to a branch of the code represented by the build, for example: If were to make a build today, our release would be version 5.0.1707.1. I release to QA today and 3 days from now QA finds that a change broke the save functionality on a page. Instead of me changing our current development code, I'd go back to the code that I used to create version 5.0.1707.1, make the fix there, then increase the BN portion of the version and would then re-release 5.0.1707.2 back to QA. In short, anytime a change is made to a branched version that isn't the active dev branch, we'd use the original version number and increase only the BN portion (even if the change happened 3 days, 3 weeks or 3 months from the initial release of that version). Anytime we make a new release from our Active dev branch, we'd come up with a new version based on the M/D of the release using the outlined strategy. We do this once every 2-3 weeks. Are there holes or pitfalls with this? If so, what are they? Thanks EDIT To clarify one point that I didn't get out very well - Oct/Nov/Dec will be two digits, it's only the year that won't be. So 9 for Sept, 10 for Oct, 11 for Nov, etc.

    Read the article

  • 10 Tips for Partners - Oracle PartnerNetwork Exchange Planning

    - by Get_Specialized!
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} With the Oracle PartnerNetwork Exchange @ Oracle OpenWorld 2012 just around the corner, here are 10 tips to aid partners in planning and preparation. Before you arrive, select the Oracle PartnerNetwork Exchange Sessions you and your team will attend Signup for the Test Fest and the exams you and your team can take while attending Review the Subject Area Focus on Documents to help you zero in on the Oracle OpenWorld sessions to attend Use the handy floor plans to get familiar with what is where in the exposition hall this year before you arrive Sunday just after lunch at 1pm, attend the PartnerNetwork Exchange keynote , Moscone North, Hall D, followed by the session track kickoffs Sunday night , 7:30pm – 10:30 pm , checkout the OPN AfterDark Reception where you can meet and network with contacts from around the world On Sunday and Monday, be sure check in with the Social Media Rally Coordinator for maximum social media expertise and exposure On Monday through Wednesday, meet with Oracle Partner representatives at the Oracle PartnerNetwork Lounge Moscone South, Exhibit Hall, Room 100 Take and share your PartnerNetwork pictures during the week with OPN on Instagram Be prepared to share with roving OPN team member reporters, how you are leveraging your OPN Specializations to provide innovative solutions and services for the Cloud. You never know – it could aid in getting you exposure as a possible speaker for next year’s event.

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-28

    - by Bob Rhubart
    Oracle Magazine Technologist of the Year Awards to honor architects at #OOW12 Seven of the ten categories in this year's Oracle Magazine Technologist of the Year Awards are designated to celebrate architects. The winners will be honored at Oracle OpenWorld -- and showered with adulation from their colleagues. Nominations for these awards close on Tuesday July 17, so make sure you submit your nominations right away. Oracle E-Business Suite 12 Certified on Additional Linux Platforms (Oracle E-Business Suite Technology) Oracle E-Business Suite Release 12 (12.1.1 and higher) is now certified on the following additional Linux x86/x86-64 operating systems: Oracle Linux 6 (32-bit), Red Hat Enterprise Linux 6 (32-bit), Red Hat Enterprise Linux 6 (64-bit), and Novell SUSE Linux Enterprise Server (SLES) version 11 (64-bit). FairScheduling Conventions in Hadoop (The Data Warehouse Insider)"If you're going to have several concurrent users and leverage the more interactive aspects of the Hadoop environment (e.g. Pig and Hive scripting), the FairScheduler is definitely the way to go," says Dan McClary. Learn how in his technical post. SOA Learning Library (SOA & BPM Partner Community Blog) The Oracle Learning Library offers a vast collection of e-learning resources covering a mind-boggling array of products and topics. And it's all free—if you have an Oracle.com membership. And if you don't, that's free, too. Could this be any easier? Oracle Fusion Middleware Security: LibOVD: when and how | Andre Correa Fusion Middleware A-Team blogger Andre Correa offers some background on LibOVD and shares technical tips for its use. Virtual Developer Day: Oracle Fusion Development Yes, it's called "Developer Day," but there's plenty for architects, too. This free event includes hands-on labs, live Q&A with product experts, and a dizzying amount of technical information about Oracle ADF and Fusion Development -- all without having to pack a bag or worry about getting stuck in a seat between two professional wrestlers. Tuesday, July 10, 2012 9:00 a.m. PT – 1:00 p.m. PT 11:00 a.m. CT – 3:00 p.m. CT 12:00 p.m. ET – 4:00 p.m. ET 1:00 p.m. BRT – 5:00 p.m. BRT Thought for the Day "Computers allow you to make more mistakes faster than any other invention in human history with the possible exception of handguns and tequila." — Mitch Ratcliffe Source: SoftwareQuotes.com

    Read the article

  • Impressions from VMworld - Clearing up Misconceptions

    - by Monica Kumar
    Gorgeous sunny weather…none of the usual summer fog…the Oracle Virtualization team has been busy at VMworld in San Francisco this week. From the time exhibits opened on Sunday, our booth staff was fully engaged with visitors. It was great to meet with customers and prospects, and there were many…most with promises to meet again in October at Oracle OpenWorld 2012. Interests and questions ran the gamut - from implementation details to consolidating applications to how does Oracle VM enable rapid application deployment to Oracle support and licensing. All good stuff! Some inquiries are poignant and really help us get at the customer pain points. Some are just based on misconceptions. We’d like to address a couple of common misconceptions that we heard: 1) Rapid deployment of enterprise applications is great but I don’t do this all the time. So why bother? While production applications don’t get updated or upgraded as often, development and QA staging environments are much more dynamic. Also, in today’s Cloud based computing environments, end users expect an entire solution, along with the virtual machine, to be provisioned instantly, on-demand, as and when they need to scale. Whether it’s adding a new feature to meet customer demands or updating applications to meet business/service compliance, these environments undergo change frequently. The ability to rapidly stand up an entire application stack with all the components such as database tier, mid-tier, OS, and applications tightly integrated, can offer significant value. Hand patching, installation of the OS, application and configurations to ensure the entire stack works well together can take days and weeks. Oracle VM Templates provide a much faster path to standing up a development, QA or production stack in a matter of hours or minutes. I see lots of eyes light up as we get to this point of the conversation. 2) Oracle Software licensing on VMware vSphere In the world of multi-vendor IT stacks, understanding license boundaries and terms and conditions for each product in the stack can be challenging.  Oracle’s licensing, though, is straightforward.  Oracle software is licensed per physical processor in the server or cluster where the Oracle software is installed and/or running.  The use of third party virtualization technologies such as VMware is not allowed as a means to change the way Oracle software is licensed.  Exceptions are spelled out in the licensing document labeled “Hard Partitioning". Here are some fun pictures! Visitors to our booth told us they loved the Oracle SUV courtesy shuttles that are helping attendees get to/from hotels. Also spotted were several taxicabs sporting an Oracle banner! Stay tuned for more highlights across desktop and server virtualization as we wrap up our participation at VMworld.

    Read the article

  • links for 2011-01-12

    - by Bob Rhubart
    WebCenter Spaces 11g PS2 Template Customization (Javier Ductor's Blog) "Recently, we have been involved in a WebCenter Spaces customization project. A customer sent us a prototype website in HTML, and we had to transform Spaces to set the same look and feel as in the prototype..." Javier Ductor (tags: oracle otn webcenter enteprise2.0) Matt Carter: Risky Business "Incorporating risk detection and mitigation capabilities into apps is becoming all the rage. There are plenty of real-life examples of cases where prevention of cyber-security threats and fraudsters might have kept governments and companies out of the news, and with more money in their accounts." (tags: oracle otn security middleware) John Brunswick: 5 Surprisingly Good Benefits of Corporate Blogs "Some may still propose that not all corporations are going to be able to provide the five benefits above and are more focused around shameless self promotion of products and services.  If that is the case, that corporation is most likely not producing something of high value." - John Brunswick (tags: oracle otn enterprise2.0 blogging) InfoQ: IT And Architecture: Inside-Out Perspectives The software industry is in disarray, costs are escalating, and quality is diminishing. Promises of newer technologies and processes and methodologies in IT are still far from materializing on any significant scale. Bruce Laidlaw and Michael Poulin - each with more than 30 years of experience compared notes on the past and present of IT and provide insights on what IT needs to make progress. (tags: ping.fm) SOA & Middleware: Canceling a running composite instance - example Useful tips from Niall Commiskey. (tags: soa middleware oracle) BPEL 11.1.1.2 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations (Oracle E-Business Suite Technology) "A new certification was released simultaneously with the E-Business Suite 12.1.3 Maintenance Pack late last year: the use of BPEL 11g Version 11.1.1.2 with E-Business Suite 12.1.3." -- Steven Chan (tags: oracle bpel) Marc Kelderman: OSB: Deploy Service Level Agreement (SLA), aka Alert Rule "The big issue with these SLAs is the deployment. If you have dozens of services, with multiple operations, and you have a lot of environments it takes a while to create them...[But] I have a nice workaround." - Mark Kelderman  (tags: oracle otn soa osb sla) @myfear: Java EE 7 - what's coming up for 2012? First hints. "Even if the actual Java EE 6 version is still not too widespread, we already have seen the first signs of the next EE 7 version written to the sky." -- Markus "myfear" Eisele (tags: oracle otn oracleace java)

    Read the article

  • Swiss Re increases data warehouse performance and deploys in record time

    - by KLaker
    Great information on yet another data warehouse deployment on Exadata. A little background on Swiss Re: In 2002, Swiss Re established a data warehouse for its client markets and products to gather reinsurance information across all organizational units into an integrated structure. The data warehouse provided the basis for reporting at the group level with drill-down capability to individual contracts, while facilitating application integration and data exchange by using common data standards. Initially focusing on property and casualty reinsurance information only, it now includes life and health reinsurance, insurance, and nonlife insurance information. Key highlights of the benefits that Swiss Re achieved by using Exadata: Reduced the time to feed the data warehouse and generate data marts by 58% Reduced average runtime by 24% for standard reports comfortably loading two data warehouse refreshes per day with incremental feeds Freed up technical experts by significantly minimizing time spent on tuning activities Most importantly this was one of the fastest project deployments in Swiss Re's history. They went from installation to production in just four months! What is truly surprising is the that it only took two weeks between power-on to testing the machine with full data volumes! Business teams at Swiss Re are now able to fully exploit up-to-date analytics across property, casualty, life, health insurance, and reinsurance lines to identify successful products. These points are highlighted in the following quotes from Dr. Stephan Gutzwiller, Head of Data Warehouse Services at Swiss Re:  "We were operating a complete Oracle stack, including servers, storage area network, operating systems, and databases that was well optimized and delivered very good performance over an extended period of time. When a hardware replacement was scheduled for 2012, Oracle Exadata was a natural choice—and the performance increase was impressive. It enabled us to deliver analytics to our internal customers faster, without hiring more IT staff" “The high quality data that is readily available with Oracle Exadata gives us the insight and agility we need to cater to client needs. We also can continue re-engineering to keep up with the increasing demand without having to grow the organization. This combination creates excellent business value.” Our full press release is available here: http://www.oracle.com/us/corporate/customers/customersearch/swiss-re-1-exadata-ss-2050409.html. If you want more information about how Exadata can increase the performance of your data warehouse visit our home page: http://www.oracle.com/us/products/database/exadata-database-machine/overview/index.html

    Read the article

  • A "First" at Oracle OpenWorld

    - by Kathryn Perry
    A guest post by Adam May, Director, Fusion CRM, Oracle Applications Development There are always firsts at OpenWorld. These firsts keep the conference fresh and are the reason people come back year after year. An important first this year is our Fusion CRM customers who are using the product and deriving real benefit from Fusion CRM. Everyone can learn from and interact with them -- including us!  We love talking to customers, especially those who are using our solutions in unexpected ways because they challenge us! At previous OpenWorlds, we presented our overall Fusion vision and our plans for Fusion CRM. Those presentations helped customers plan their strategies and map out their new release uptakes. Fast forward to March of this year when the first Fusion CRM customer went live. Since then we've watched the pace of go-lives accelerate every single month. Now we're at the threshold of another OpenWorld -- with over 45,000 attendees, 2,500 sessions and LOTS of other activities. To avoid having our customers curl into a ball with sensory overload, we designed a Focus On Document to outline the most important Fusion CRM activities. Here are some of the highlights: Anthony Lye's "Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap" on Monday at 3:15 p.m. The CRM Pavilion, open in Moscone West from Monday through Wednesday; features our strategic Fusion CRM partners and provides live demonstrations of their capabilities General Session: "Oracle Fusion CRM--Improving Sales Effectiveness, Efficiency, and Ease of Use" on Tuesday at 11:45 a.m.; features Anthony Lye and Deloitte "Meet the Fusion CRM Experts" on Tuesday at 5:00 p.m.; this session gives customers the opportunity to interact one-on-one with Fusion experts divided into eight categories of expertise CRM Social Reception on Tuesday from 6-8 p.m.; there's no better way to spend the early evening than discussing Fusion CRM with Oracle experts and strategic partners over appetizers and drinks Wednesday night is Oracle's Customer Appreciation event; enjoy Pearl Jam, Kings of Leon, etc. beginning at 7:30 p.m. at Treasure Island Be sure to drink plenty of water before sleeping Wednesday night and don't stay out too late because we have lots of great content on Thursday; at the top of the list is "Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement" at 11:15 a.m. We hope you have a fantastic experience at OpenWorld 2012! And here's a little video treat to whet your appetite: http://www.youtube.com/user/FusionAppsAtOracle

    Read the article

  • Registering domain during christmas holydays

    - by arkascha
    One of the domain names I tried to register previously has been blocked by a domain grabber two days prior to my own attempt. That was about 1 year ago. The attempt to buy the domain from that person failed due to a totally exaggerated price. So I dropped the issue and watched the domain (offered at sedo.com). As expected there were no more offers, the domain was not sold. Now I learn from the whois database that the registration of that domain name ends on 25.12.2012 (christmas holyday). This raises two questions for me, I fail to find reliable answers on the internet. So maybe someone experienced here can drop a statement or a hint: is it reasonable that the domain name in question really will be free again when that date mentioned in the whois database up to when the domain is registered has passed? I certainly know that the registration can be prolonged, that is not what I mean. I expect (hope) that that domain grabber does not extend the registration, since it costs money and effort and he failed to sell the domain. Provided this is the case and the domain registration is not prolonged, is that date mentioned reliable? Or might it just be some 'default' date? I would like to try to register that domain name as soon as it is unregistered. Since that domain grabber registered that domain only two days before my own registration attempt I would like to prevent such annoying interference next time. So I ask myself: is it possible to register a domain name on a holyday? I mean not to send an email to my provider to do so on that day or before, but to actually have to process taking place as not to wait for 1-2 days after the unregistration? My own provider which I am very happy with does not offer such service on a holyday (which is perfectly understandable). They are 'still checking' if they can offer something automatic. I researched and did not find an answer to the question if that is possible at all. Is an autoomatic registration attempt on a holyday possible? Where can I do that? Is that reliable? Thanks for any reply!

    Read the article

  • Database unit testing is now available for SSDT

    - by jamiet
    Good news was announced yesterday for those that are using SSDT and want to write unit tests, unit testing functionality is now available. The announcement was made on the SSDT team blog in post Available Today: SSDT—December 2012. Here are a few thoughts about this news. Firstly, there seems to be a general impression that database unit testing was not previously available for SSDT – that’s not entirely true. Database unit testing was most recently delivered in Visual Studio 2010 and any database unit tests written therein work perfectly well against SQL Server databases created using SSDT (why wouldn’t they – its just a database after all). In other words, if you’re running SSDT inside Visual Studio 2010 then you could carry on freely writing database unit tests; some of the tight integration between the two (e.g. right-click on an object in SQL Server Object Explorer and choose to create a unit test) was not there – but I’ve never found that to be a problem. I am currently working on a project that uses SSDT for database development and have been happily running VS2010 database unit tests for a few months now. All that being said, delivery of database unit testing for SSDT is now with us and that is good news, not least because we now have the ability to create unit tests in VS2012. We also get tight integration with SSDT itself, the like of which I mentioned above. Having now had a look at the new features I was delighted to find that one of my big complaints about database unit testing has been solved. As I reported here on Connect a refactor operation would cause unit test code to get completely mangled. See here the before and after from such an operation: SELECT    * FROM    bi.ProcessMessageLog pml INNER JOIN bi.[LogMessageType] lmt     ON    pml.[LogMessageTypeId] = lmt.[LogMessageTypeId] WHERE    pml.[LogMessage] = 'Ski[LogMessageTypeName]of message: IApplicationCanceled' AND        lmt.[LogMessageType] = 'Warning'; which is obviously not ideal. Thankfully that seems to have been solved with this latest release. One disappointment about this new release is that the process for running tests as part of a CI build has not changed from the horrendously complicated process required previously. Check out my blog post Setting up database unit testing as part of a Continuous Integration build process [VS2010 DB Tools - Datadude] for instructions on how to do it. In that blog post I describe it as “fiddly” – I was being kind when I said that! @Jamiet

    Read the article

  • freetds ./configure unrecognized option --prefix

    - by jdog
    I'm trying to compile freetds according to these instructions: http://www.mavrick.id.au/2012/php-5-3-6-mssql-freetds/ However configure is failing. My command is: ./configure --enable-msdblib -–prefix=/usr/local/freetds I'm getting configure: error: unrecognized option: `-–prefix=/usr/local/freetds' Try `./configure --help' for more information. for all command line options, even --help I have build-essentials, gcc and make installed. I also tried sudo, even though I am logged in as root. It seems to me something is still missing?

    Read the article

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • Blender to 3ds max to cal3d format

    - by Kaliber64
    There are quite a few questions on cal3d but they are old and don't apply anymore. In Blender(must be 2.49a for python script to work!!!): I have a scene with 7 meshes, 1 armature, 10 bones. I tried going to one mesh to simplify it but doesn't change anything. I found a small blend file that was used for cal3d and it exported just fine. So I tried to copy it's setup with no success. EDIT*8/13/2012 In the last week here is what I have found so far. I made the mesh in the newest blender(2.62?) and exported it to import it in the old one(2.49a). Did an animation in the old one because importing new blend files to old blenders, its just said it would lose keyframe data and all was good. And then you get the last problem of it not exporting meshes. BUT I found that meshes made in the old one export regardless. I can't find any that won't export. So if I used the old blender to remake my model I could get it to export :) At this point I found a modified release of cal3d (because the most core model variable would not initiate as I made a really small test subject in old blender instead of remaking my big one which took 4 hours.) which fixes the morph objects and adds what cal3d left off with. Under their license they have to release the modification but it has no documentation so I have to figure it out on my own. Its mostly the same. But with this lib it came with a 3ds max exporter. My question now is how do I transfer armature and mesh information from blender to 3ds max in order to export into cal3d format. Every time I try the models are see through and small and there are no bones. The formats I have tried to import are .3ds .obj(mesh only) and COLLADA. In all of them the mesh is invisible and no bones. It says the default texture is on so I should be able to see it. All the vertices are present I found a vertex highlighter so I can see those. If any of this is confusing let me know so I can clear it up. Its late .<=sleep.

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-05

    - by Bob Rhubart
    Why is enterprise software often so complicated? | Rajesh Raheja rraheja.wordpress.com Rajesh Raheja shares "a few examples of requirements that lead to creation of complex platform infrastructures that up the complex enterprise software." Educause Top-Ten IT Issues - the most change in a decade or more | Cole Clark blogs.oracle.com Cole Clark discusses why "higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia." Oracle VM RAC template - what it took | Wim Coekaerts blogs.oracle.com Wim Coekaerts shares an example that shows how easy it is to deploy a complete Oracle RAC cluster with Oracle VM. Oracle Cloud and Oracle Platinum Services Announcements oracle.com Featuring Larry Ellison and Mark Hurd. Wednesday, June 06, 2012. 1:00 p.m. PT – 2:30 p.m. PT Creating an Oracle Endeca Information Discovery 2.3 Application Part 1 : Scoping and Design | Mark Rittman www.rittmanmead.com Oracle ACE Director Mark Rittman launches a new series that dives into "the various stages in building a simple Oracle Endeca Information Discovery application, using the recent Endeca Information Discovery 2.3 release." Introducing Decision Tables in the SOA Suite 11g | Lucas Jellama technology.amis.nl Oracle ACE Director Lucas Jellema demonstrates how "the decision table can be put to good use to implement the business logic behind the classical game of Rock, Paper and Scissors." Application integration: reorganise, recycle, repurpose | Andrew Clarke radiofreetooting.blogspot.com "Integration is a topic which is in everybody's baliwick," says Oracle ACE Andrew Clarke. "The business people want to get the best value from their existing IT investments. The architects need to understand the interfaces between the silos and across the layers. The developers have to implement it." Using XA Transactions in Coherence-based Applications | Jonathan Purdy blogs.oracle.com Purdy shares "a few common approaches when integrating Coherence into applications via the use of an application server's transaction manager." Thought for the Day "The difficulty lies, not in the new ideas, but in escaping from the old ones..." — John Maynard Keynes (June 5, 1883 - April 4, 1946) Source: Quotations Page

    Read the article

  • ITT Corporation Goes Live on Oracle Sales and Marketing Cloud Service (Fusion CRM)!

    - by Richard Lefebvre
    Back in Q2 of FY12, a division of ITT invited Oracle to demo our CRM On Demand product while the group was considering Salesforce.com. Chris Porter, our Oracle Direct sales representative learned the players and their needs and began to develop relationships. We lost that deal, but not Chris's persistence. A few months passed and Chris called on the ITT Shape Cutting Division's Director of Sales to see how things were going. Chris was told that the plan was for the division to buy more Salesforce.com. In fact, he informed Chris that he had just sent his team to Salesforce.com training. During the conversation, Chris mentioned that our new Oracle Sales Cloud Service could run with Outlook. This caused the ITT Sales Director to reconsider the plan to move forward with our competition. Oracle was invited back to demo the Oracle Sales and Marketing Cloud Service (Fusion CRM) and after it concluded, the Director stated, "That just blew your competition away." The deal closed on June 5th , 2012 Our Oracle Platinum Partner, Intelenex, began the implementation with ITT on July 30th. We are happy to report that on September 18th, the ITT Shape Cutting Division successfully went live on Oracle Sales and Marketing Cloud Service (Fusion CRM). About: ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for growing industrial end-markets in energy infrastructure, electronics, aerospace and transportation. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Founded in 1920, ITT is headquartered in White Plains, NY, with 8,500 employees in more than 30 countries and sales in more than 125 countries. The ITT Shape Cutting Division provides plasma lasers and controls with the Burny, Kaliburn, and AMC brands. Oracle Fusion Products: Oracle Sales and Marketing Cloud Service (Fusion CRM) including: • Fusion CRM Base • Fusion Sales Cloud • Fusion Mobile and Desktop Integration • Automated Forecasting Adoption Model: SaaS Partner: Intelenex Business Drivers: The ITT Shape Cutting Division wanted to: better enable its Sales Force with email and mobile CRM capabilities simplify and automate its complex sales processes centrally manage and maintain customer contact information Why We Won: ITT was impressed with the feature-rich capabilities of Oracle Sales and Marketing Cloud Service (Fusion CRM), including sales performance management and integration. The company also liked the product's flexibility and scalability for future growth. Expected Benefits: Streamlined accurate forecasting Increased customer manageability Improved sales performance Better visibility to customer information

    Read the article

  • No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

    - by Nick
    I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

    Read the article

  • Manic Monday - More OpenWorld Solaris Sessions: Developers, Cloud, Customer Insights, Hardware Optimization

    - by Larry Wake
    We're overflowing with Monday sessions; literally more than one person can take in. Learn more about what's new in Oracle Solaris Studio, hear about the latest x86 and SPARC hardware optimizations, get some insights on cloud deployment strategies, and find out from your peers what they're doing with Oracle Solaris. If you're an OpenWorld attendee, go to to Schedule Builder to guarantee your space in any session or lab. See yesterday's blog post and the "Focus on Oracle Solaris" guide for even more sessions. Monday, October 1st: 10:45 AM - Maximizing Your SPARC T4 Oracle Solaris Application Performance(CON6382,  Marriott Marquis - Golden Gate C3) Hear how customers and commercial software partners have reached peak performance on SPARC T4 servers and engineered systems with Oracle Solaris Studio and its latest tools for analyzing, reporting, and improving runtime performance: Autoparallelizing, high-performance compilers Performance Analyzer (used to find performance hotspots) Thread Analyzer (to expose data races and deadlocks) Code Analyzer (used to discover latent memory corruption issues) 10:45 Cloud Formation: Implementing IaaS in Practice with Oracle Solaris(CON8787, Moscone South 302) Decisions, decisions--at the same time, we've got a session that covers why Oracle Solaris is the ideal OS for public or private clouds, IaaS or PaaS, with built-in features for elastic infrastructure, unrivaled security, superfast installation and deployment, nonstop availability, and crystal-clear observability. This session will include a customer study on how Oracle Solaris is used in the cloud today to implement the Oracle stack. 12:15 PM - Customer Insight: Oracle Solaris on Oracle Exadata, Oracle Exalogic, and SPARC SuperCluster(CON8760, Moscone South 270) Hear from customers what benefits they have realized from using the Oracle stack on Oracle Exadata and Oracle’s SPARC SuperCluster and from using Oracle Solaris on those engineered systems, taking advantage of built-in lightweight OS virtualization (Zones), enterprise reliability and scale, and other key features. 1:45 PM - Case Study: Mobile Tornado Uses Oracle Technology for Better RAS and TCO?(CON4281, Moscone West 2005) Mobile Tornado develops and markets instant communication platforms, replacing traditional radio networks with cellular networks. Its critical concern is uptime. Find out how they've used Oracle Solaris, Netra SPARC T4, and Oracle Solaris Cluster, including Oracle Solaris ZFS and Zones, for their Oracle Database deployments to improve reliability and drive down cost. 3:15 PM - Technical Panel: Developing High Performance Applications on Oracle Solaris(CON7196, Marriott Marquis - Golden Gate C2) Engineers from the Oracle Solaris, Oracle Database, and Oracle Tuxedo development teams, and Oracle ISV Engineering discuss how they develop high-performance enterprise applications that take advantage of Oracle's SPARC and x86 servers, with Oracle Solaris Studio and new Oracle Solaris 11 features. Topics will include developer tools, parallel frameworks, best practices, and methodologies, as well as insights and case studies on parallelizing and optimizing application performance on Oracle Solaris. Bring your best questions! 3:15 PM -  x86 Power Management with Oracle Solaris: Current State, Opportunities, and Future(CON6271, Moscone West 2012) Another option for this time slot: learn about how Intel Xeon and Oracle Solaris work together to reduce server power consumption. This presentation addresses some of the recent power management improvements in Oracle Solaris, opportunities to further improve energy efficiency, and some future directions for Oracle Solaris power management.

    Read the article

  • Why would you dual-run an app on Azure and AWS?

    - by Elton Stoneman
    Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/11/10/why-would-you-dual-run-an-app-on-azure-and-aws.aspxI had this question from a viewer of my Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS, and thought I’d publish the response. So why would you dual-run your cloud app by hosting it on Azure and AWS? Sounds like a lot of extra development and management overhead. Well the most compelling reasons are reliability and portability. In 2012 I was working for a client who was making a big investment in the cloud, and at the end of the year we published their first external API for business partners. It was hosted in Azure and used some really nice features to route back into existing on-premise services. We were able to publish a clean, simple API to partners, and hide away the underlying complexity of the internal services while still leveraging them to do all the work. Two days after we went live, we were hit by the Azure SSL certificate expiry outage, and our API was unavailable for the best part of 3 days. Fortunately we had planned a gradual roll-out to partners, so the impact was minimal, but we’d been intending to ramp up quickly, and if the outage had happened a week or two later we would have been in a very bad place. Not least because our app could only run on Azure, we couldn’t package it up for another service without going back and reworking the code. More recently AWS had an issue with a networking device in one of their data centres which caused an outage that took the best part of a day to resolve. In both scenarios the SLAs are worthless, as you’ll get back a small percentage of your cloud expenditure, which is going to be negligible compared to your costs in dealing with the outage. And if your app is built specifically for AWS or Azure then if there’s an extended outage you can’t just deploy it onto a new set of kit from a different supplier. And the chances are pretty good there will be another extended outage, both for Microsoft and for Amazon. But the chances are small that it will happen to both at the same time. So my basic guidance has been: ignore the SLAs, go for better uptime by using two clouds. As soon as you need to scale beyond a single instance, start by scaling out to another cloud. Then scale out to different data centres in both clouds. Then you’ve got dual-cloud, quadruple-datacentre redundancy, so any more scaling you need can be left to the clouds to auto-scale themselves. By running in both clouds, you’ve made your app portable, so in the highly unlikely event that both AWS and Azure go down in multiple regions, you’ll have a deployment package which will let you spin up a new stack on yet another cloud, without having to rework your solution.

    Read the article

  • Java Embedded Releases

    - by Tori Wieldt
    Oracle today announced a new product in its Java Platform, Micro Edition (Java ME) product portfolio, Oracle Java ME Embedded 3.2, a complete client Java runtime Optimized for resource-constrained, connected, embedded systems.  Also, Oracle is releasing Oracle Java Wireless Client 3.2, Oracle Java ME Software Development Kit (SDK) 3.2. Oracle also announced Oracle Java Embedded Suite 7.0 for larger embedded devices, providing a middleware stack for embedded systems. Small is the new big! Introducing Oracle Java ME Embedded 3.2  Oracle Java ME Embedded 3.2 is designed and optimized to meet the unique requirements of small embedded, low power devices such as micro-controllers and other resource-constrained hardware without screens or user interfaces. These include: On-the-fly application downloads and updates Remote operation, often in challenging environments Ability to add new capabilities without impacting the existing functions Support for hardware with as little as 130 kB RAM and 350 kB ROM Oracle Java Wireless Client 3.2 Oracle Java Wireless Client 3.2 is built around an optimized Java ME implementation that delivers a feature-rich application environment for mass-market mobile devices. This new release: Leverages standard JSRs, Oracle optimizations/APIs and a flexible porting layer for device specific customizations, which are tuned to device/chipset requirements Supports advanced tooling functions, such as memory and network monitoring and on-device tooling Offers new support for dual SIM functionality, which is highly useful for mass-market devices supported by multiple carriers with multiple phone connections Oracle Java ME SDK 3.2 Oracle Java ME SDK 3.2 provides a complete development environment for both Oracle Java ME Embedded 3.2 and Oracle Java Wireless Client 3.2. Available for download from OTN, The latest version includes: Small embedded device support In-field and remote administration and debugging Java ME SDK plug-ins for Eclipse and the NetBeans Integrated Development Environment (IDE), enabling more application development environments for Java ME developers. A new device skin creator that developers can use to generate their custom device skins for testing their applications. Oracle Embedded Suite 7.0 The Oracle Java Embedded Suite is a new packaged solution from Oracle (including Java DB, GlassFish for Embedded Suite, Jersey Web Services Framework, and Oracle Java SE Embedded 7 platform), created to provide value added services for collecting, managing, and transmitting data to and from other embedded devices.The Oracle Java Embedded Suite is a complete device-to-data center solution subset for embedded systems.  See Java Me and Java Embedded in Action Java ME and Java Embedded technologies will be showcased for developers at JavaOne 2012 in over 60 conference sessions and BOFs, as well as in the JavaOne Exhibition Hall. For business decision makers, the new event Java Embedded @ JavaOne you learn more about Java Embedded technologies and solutions.

    Read the article

  • Microsoft BUILD 2013&ndash;Day 1 Summary

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013ndashday-1-summary.aspx I’m happy to be at BUILD this week, mainly because my flights finally got me here late on Tuesday.  My biggest complaints so far are the flights and the hotel.  It seems that almost every flight into San Francisco were delayed multiple hours.  The Sequester so lovingly forced on America by congress means that the airport was short controllers.   That, along with poor weather and airport construction meant most people were 2-3 hours late arriving.  Add on top of that the fact that the hotel that I picked durring registration is absolutely horrid.  It looks like something out of a ghost hunters show and smells like it too.  I think if Microsoft is going to select a hotel they need to make sure that it is adequate. Rant over! So what happened the first day?  Steve Balmer started off the keynote along with Julie Larson-Green and a cast of others.  We finally found out that there were around six thousand people attending BUILD and that the focus this year would be Windows 8, Windows Phone 8 and Azure.  For the rest of the keynote I am going to have a separate post. You can’t have a Microsoft conference without some fun.  This year they have a hunt for pins that represent different gestures in Windows 8.  I got all of mine.  Now they just need to pull my name. The sessions I attended were really good. They covered live tiles, what’s new in XAML and building Windows Phone UIs presented by Kraig Brockschmidt, Tim Heuer and Shawn Oster respectively.  These will also be covered in separate posts. The exhibit area was interesting, but somewhat disappointing.  TechEd 2012 I think was better organized and better staffed by the vendors.  It also seemed that the Microsoft teams’ booths were also in need of some organization and staffing. Overall it was a really fun day capped off by all six thousand attendees standing in like to get their Acer 8” tables and Surface Pros.  What a day!  Stay tuned for follow up posts. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote

    Read the article

  • Designing a completly new database/gui solution for my compnay

    - by user1277304
    I'm no expert when it come to Everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my compnay that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio buttton control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionaly done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that runnning, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our buisness is growing and our current ancient solution just can't keep up, and I'd hate to see our buisness go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endevour, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole. Thank you guys for your time.

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >