Search Results

Search found 37348 results on 1494 pages for 'low end hardware'.

Page 257/1494 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

• Windows 7 Locking up Randomly

  - by Michael Moore

  I've got a Windows 7 machine that is locking up randomly. It can be in the first thirty seconds, or it can be hours later. There is nothing specific I can find that is running when it happens. When it locks, the screen doesn't change, but nothing moves. The waiting icon stops, the mouse stops, keyboard doesn't work, etc. I've even tried the crash on ctrl-scrl registry hack, and it won't even dump the kernel. I've run hardware diagnostics on the RAM and it doesn't find any problems. I would think it is a hardware issue, but on this exact same machine, I can run 64 Bit Ubuntu and it has zero problems. I've even tried reinstalling Windows7 from scratch, and it still happens. Anyone have any ideas? Any good diagnostic tools to recommend? Thanks! Michael

  Read the article

• Best RAID setup for multimedia fileserver?

  - by Mr. Schwabe

  I'm building a fileserver for my small office. We do film and multimedia design. Only 3 clients connected. The server is primarily for local access to graphic assets and video files. I'm looking for advice on hardware and software required. Particularly for the RAID. I have the following objectives: A) merged capacity I'd like all other systems to access the data as a single mapped network drive that has an initial capacity of 10 TB. So perhaps 5x 2TB drives (plus mirror drives for redundancy). B) easy way to increase capacity Thinking long term, I'd like to 'easily' add more drives to the array for a potential two or three fold increase in capacity. So theoretically it could get upto a 30 TB raid array consisting of maybe 15x 2 TB drives of capacity (plus mirror drives for redundancy). C) maximum fault tolerance I want at least 1 mirror drive per capacity drive (in laymen's terms). So if I start with 10 TB / 5x 2TB of capacity, I suppose I would need another another 5x 2TB drives to be mirrors. So 10 drives total. But I'd also like potential for even more redundancy; with upto 2 additional mirrors per 'capacity drive' (and to be able to add them to the array anytime with ease). D) easy way to monitor drive health I'd like an intuitive interface for managing the raid and monitoring drive health The other systems accessing this network drive will be running Windows, but also the odd Ubuntu and MacOS system as well. Are these objectives attainable? What type of RAID setup do you recommend? What hardware will be required? Also what OS do you think this system should be running? Does it really matter? I'm no network admin - just a long time Windoze user, without much Linux experience. That said, I'm not opposed to a Linux solution if it's easy enough and more practical than a Windows OS for this server. Or maybe something such as Openfiler. Budget should hit the sweet spot for value and performance (hence my preference to use 2TB drives). The biggest focus is storage; aside from that the system just needs to keep the drives running optimally with perhaps 2 or 3 clients accessing / writing files at any given time. The hardware quote would start with something like 10x 2TB WD Caviar Blacks; about $1900 for the storage + $x for remaining parts. http://ncix.com/products/index.php?sku=42775&vpn=WD2001FASS&manufacture=Western%20Digital%20WD Your advice is appreciated, thanks!

  Read the article

• Limit disk I/O one program creates?

  - by Posipiet

  Hardware: one virtualization server. Dual Nehalem, 24GB RAM, 2 TB mirrored HD. Software: Debian, KVM, virt-manager on the server with several virtual machines that use Linux too. 2 TB Disk is a big LVM, each VM gets a logical volume and makes its own partitions in that. Problem: One of the programs that runs on one of the VMs creates huge disk load. This never was an issue, because the program never ran on such a powerful hardware. Now the CPUs are fast, and lots of I/O is the result. We cant do much against that at the moment, because the tool is a black box. On the other hand, the speedy computation is welcome. The program creates about 5 GB of temp files which get overwritten during the next iteration. Question: How can we limit the disk I/O for the process?

  Read the article

• XP shared folders not accessible after BIOS changed

  - by stijn

  Here's what worked for over a year: PC A runs Windows 7, PC B runs Windows XP. Both are on the same subnet behind a router. A uses user account X, but logs in to PC B using the Administrator account. PC B is a Dell Precision 470. A known problem with these is that sometimes when plugging in their power cable they somehow loses all BIOS settings. This happened yesterday. After this happens Windows won't boot, because the default BIOS setting is 'RAID ON' while there is no RAID configured. No problem though, changing the BIOS settings to 'RAID OFF' makes it boot without problems. Note that in the meantime, nothing config-related was changed on machine A. It wasn't even on. Indeed after doing this, everything is fine. Everything includes all normal operations, remote desktop from PC A to PC B, running Synergy between A and B, accessing shared folders from B to A. But accessing the shared folders on B from A does not work any more. I tried pretty much everything I found via Google (fiddling with policies/registry kes/...) but no avail. > ping -a 192.168.2.2 Pinging A [192.168.2.2] with 32 bytes of data: Reply from 192.168.2.2: bytes=32 time<1ms TTL=128 > net view \\192.168.2.2 System error 5 has occurred. Access is denied. > net use /persistent:no K: \\A\myshare /user:A\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:192.168.2.2\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:USERNAME PASSWORD System error 86 has occurred. The specified network password is not correct. A solution to this would be great: I haven't been able to do any work since yesterday ;] update after taking the hard drive out of B and putting it in another Precision 470 with almost exactly the same hardware (at first sight, only the video card differs) the shared folders work.. Putting the disk back into A, same problem remains. Why does this depend on hardware, and more important, on which hardware?

  Read the article

• Creating a vm using Hyper-V causes the host of BSOD

  - by Arcass

  Hi, Problem description: When I try to create a virtual machine, the host bsod part way through the process. From the logs in lookes to fail/hang on the "Creating new VirtualDisckDriver with new VHD" step. The BSOD error code is SYSTEM_SERVICE_EXCEPTION : STOP:0x0000003B When the machine has finished restarting, it looks to have created the vhd and XML files for the vm but it isn't accessable. I have two server bothing behaving in exactly the same way, so I don't believe it's a hardware fault. Has anyone had a similar experince? How did you resolve the problem? NOTES Hardware: HP DL380 G6 BIOS : 2010.03.30 (14 Apr 2010) [Latest from HP website] Inter Hyperthreading: Disabled Intel Virtuazation Technology : Enabled No-Execute Memory Protection: Enabled Mem check reports no errors OS: Windows 2008 Sp2 x64bit fully updated regards Arcass

  Read the article

• how to pass domain name to backend with pound

  - by FurtiveFelon

  I am using pound as a way to decode SSL for the backend, but the bulk of the work is done on varnish (including virtualhost stuff). As a result, I need pound to just forward all other traffic to varnish verbatim, but it doesn't seem to do that. I am using the default configuration: ListenHTTP Address 1.2.3.4 Port 8080 ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: xHTTP 0 Service BackEnd Address 127.0.0.1 Port 80 End End End So whenever I hit example.com:8080, it will always redirect to the default backend for varnish, which i assume was because the domain (host) header isn't send along. Anyone know what could be wrong? Thanks a lot! Jason

  Read the article

• Applescript Adobe Updater

  - by Alex

  So, I am new to Applescript editor and I am trying to write code to automatically update computers. For some odd reason I can not seem to get Adobe to update successfully. I tried using Accessibility Inspector, but nothing appeared like AXButton So is there even a way of writing code for Adobe when there is not an AXButton option? This is the code: tell application "Adobe Application Manager" activate end tell delay 7.0 tell application "System Events" tell process "Adobe Application Manager" click button "Update" of window "Adobe Application Manager" end tell end tell and this is the error message: error "System Events got an error: Can’t get button \"Update\" of window \"Adobe Application Manager\" of process \"Adobe Application Manager\"." number -1728 from button "Update" of window "Adobe Application Manager" of process "Adobe Application Manager

  Read the article

• Word Macro: Move Cursor Down a Row

  - by Bryan

  I have a macro which I've been using to merge two cells together in a word table, but what I want to do is to get the cursor to move down by one cell, so that I can repeatedly press the shortcut key to repeat the command over and over. The macro code that I have (shamelessy copied and pasted from a web page), is as follows: Sub MergeWithCellToRight() ' ' MergeWithCellToRight Macro ' ' Dim oRng As Range Dim oCell As Cell Set oCell = Selection.Cells(1) If oCell.ColumnIndex = Selection.Rows(1).Cells.Count Then MsgBox "There is no cell to the right?", vbCritical, "Error" Exit Sub End If Set oRng = oCell.Range oRng.MoveEnd wdCell, 1 oRng.Cells.Merge Selection.Collapse wdCollapseStart End Sub I've attempted to add the following line just before the 'End Sub' statement Selection.MoveDown wdCell, 1 but this generates the error, Run-time error '4120' Bad Parameter whenever I execute the macro. Can anyone tell me how to correct this or what I'm doing wrong?

  Read the article

• How long will the serial port be around for?

  - by Andy

  It seems that the serial port has a remarkable ability to stick around. You might call it the hardware equivalent of Windows XP. Despite pretty much physically disappearing from laptops and the like, the need to use a serial port still exists, even if it means using a converter of some sort. It is very much a legacy piece of hardware, and yet so many devices and instruments still use it. I use it myself daily in my work with PLC's, HMI's, barcode readers, etc. In my opinion, I don't think it is going anywhere soon, but how long do you think it has got before joining the museum? Do you think it ever will?

  Read the article

• Synergy and Screensaver Sync

  - by user10107

  Hi, I've been using Synergy for some time now to sync an Ubuntu machine and a Windows XP box, and it works really great. The one issue that still lingers is screensaver syncing. Meaning, that if, for example, the Linux box's screensaver is activate or deactivated, the Windows machine's screensaver follows suite. I've tried uninstalling the Gnome screen saver and also tried a different session altogether (e.g. xfce), but nothing seems to work. I've attached my configuration bellow. What else can I try? Thank you section: screens linux-box: windows-box: end section: links linux-box: left = windows-box windows-box: right = linux-box end section: options screenSaverSync = true end

  Read the article

• Anti Aliasing dead

  - by Gazoza

  I have a problem with anti-aliasing. No matter the software settings, it seems to be gone. I tried driver updating and reinstalling, cleaning of the hardware, different monitor with different cablies, OS reinstalling and changing, none of which helped. I decided to change the graphic card, but that didn't work either. Moreover, I have a distinct impression that the jagged edges are worsening as time goes by. I think this is a hardware-related issue, but I don't know exactly what to do. If anyone here had similar troubles, and/or has an idea how to cope with them, I'd be very grateful. My current card is a nVidia GT610.

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Ubuntu 12.04 crash analysis - strange binary data on all open files at the moment of crash

  - by lanbo

  A couple of hours ago we got a system crash on Ubuntu 12.04. We checked all the log files and there is nothing suspicious to blame to. Last stuff that was logged was some dovecot activity. There are no kernel panic messages. Nothing. It is a new server (new hardware) we are testing before production. And because it is new hard, I'm suspicious the problem may be due to some faulty hardware. We already run memtester with no problem detected. I'll be happy to hear from other hardware testing tools (the machine has SSD). Anyway, the thing I wanted to ask you is a different one. The strange thing is on every open file at the moment of the crash we found the next sequence of symbols was written into them: "@^@^@^@^@^@^@...". For example, on the syslog log file we got: Apr 16 15:53:56 odyssey dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<info>, method=PLAIN, rip=46.29.255.73, lip=5.9.58.177 ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^ [these continues for about 1000 chars...] ^@^@^@^@Apr 16 15:55:12 odyssey kernel: imklog 5.8.6, log source = /proc/kmsg started. We got all these symbols in all open files. These include: syslog, mail.log, kern.log, ... But also on some logs that are output by php scripts run in CRONs from user accounts (not root). So, any idea why all open files got these characters written during the crash? This is pretty bad since the crash corrupted many files (we don't even know which other ones may be affected). We are suspicious that all open files (in write mode maybe) at the moment of the crash got all these symbols inserted. Why is that? BTW [in case it helps], the system automatically rebooted after the crash but Apache did not start. There were not traces in /var/apache2/*log why apache did not start. After running a "service apache2 start" it started with no problems. Also, we rebooted the machine manually and Apache also started on reboot. But it did not start after the crash and no errors were reported. Thanks guys!

  Read the article

• Application to use for Winfast DTV1000T Tuner card

  - by lagerdalek

  The WinFast application that they have built for the purpose is pretty typical of hardware vendor built software, and was looking for something nicer.

  Read the article

• RJ45 female to male fault

  - by GeoPhoenix

  i have the following - common - problem, on one end of the cable, there are RJ45 males T586 A which are connected to a 8-port switcher, on the other end, there supposed to be RJ45 females _T586 A which in turn will allow another RJ45 male to be connected. the commonly used color scheme was followed on males (having the head down) blue white blue orange white green green white orange brown white brown the problem i believe is located on female end of cable, which i try multiple time to follow the numbers designated by the module, which is the list above in reverse, and as listed resulting in no signal transmission. tried the T586B (both ends) for device to device once, but no results. Which is the proper way of handling this wiring? There were also additional RJ45 females with the numbers 6-5-4-3, but 1 to 8 isn't supposed to be used for this?

  Read the article

• sonicwall nsa 240

  - by Adam

  Hi We are looking into putting a hardware firewall into a data center to protect our rack of servers. We are using the servers for terminal services and we have 2 x 1GB connections to the Internet. We have about 50 servers supporting about 250 users which will grow very soon to 500 users. We plan to purchase 2 hardware firewalls to provide HA. Do you think the Sonicwall NSA 240 with Total Secure is a good match for this in terms of performance and protection (from spyware, virus etc?) or is there a better purchase? (Maybe a Watchguard X5 or X8?)

  Read the article

• smallest footprint for Web Application server?

  - by edgardodelamanta

  There are times when you need to spare hardware resources (either to keep using legacy hardware, to play the embedded card, or just to be efficient because a large footprint is trashing CPU caches, leading to unacceptable levels of idle-states). In this spirit, some efforts have been made to make 'light' ports of Java or Mono (C# for Linux), and they range in the 80-50 MB (instead of the 100-200 MB). Add a Web server (Apache, IIS, etc.) to the scripting engine and you can happily dive into the GB (IIS + .Net) only to load the tool in memory. Anybody with more modest tools in the specs area?

  Read the article

• AMD Processors and the Windows Phone 8 Emulator

  - by Aj Patel

  I would madly appreciate it if anyone in this community would help me with my question. The background is that I want to develop Windows Phone 8 applications but both of my current computer processors do not have Hardware Virtualization & Second Level Address Translation that are needed to run the Emulator. I have my eyes on an AMD computer g7-2243us (I like it because it has 1600x900 screen res). I looked up this Link that shows that this computer's AMD processor (Next Gen AMD Quad-Core A8-4500M Accelerated 1.9GHz up to 2.8GHz 4MB L2 Cache Processor) supports AMD-V Hardware Virtualization. So, will this computer be able to run the emulator? Thank you so much for your answers. I'm pretty sure it will run the emulator, but I just want to make sure before spending $400. Thank You all So Much.

  Read the article

• What kind of SATA interface is on a Thinkpad X120E?

  - by Jorge Castro

  I recently ordered a Thinkpad X120E with an AMD Fusion (Zacate) chipset. I am eyeballing an SSD for it, however newer SSDs are coming out with 6Gbps SATA interfaces. I doubt such a cheap laptop has 6Gbps SATA, but I'm debating waiting the a bit longer until the Intel 510 series come out, if anything to future proof myself by putting it in this laptop and then later on when I do upgrade to a laptop with 6Gbps SATA I'll be good to go. The hardware manual mentions that the motherboard is for a "AMD Fusion E-350" but the specifications of each hardware part isn't part of the manual. Does anyone have any information on the kind of SATA controllers in Fusion laptops so I can make a better purchasing decision?

  Read the article

• From a quality perspective, what is better: Turning volume up in the software, in the OS, or on the speakers?

  - by Qqwy

  I kept thinking about this, and out of sheer curiosity, I decided to ask: If music isn't loud enough. How do I get the best quality?(Even if the difference is in fact so small it's neglectible) By making the music louder in my music player, game or other sound-producing software program. By raising the volume at the Operating System level (for instance, by clicking the 'speaker' icon on the windows bar and turning the volume up) By turning the volume up on the Amplifier or Speakers that are attached to your computer, and thus changing the volume on the 'hardware' Does programs vs OS matter? Does software vs. hardware matter? Thanks, Qqwy

  Read the article

• Stress test a server for simultaneous connection

  - by weston smith

  I am trying to figure out a practical way to stress test a server for 300 to 600 simultaneous connections. Any advice? Thank you everyone for the help. To be more specific (sorry I wasn't before) this is a Flash Media Server on AWS that will be streaming live video. I've been having problems with the video freezing/buffering for everyone and I need to verify if its on the user end, upload end, or server end. I mainly need help with stress testing the server with 300-600 multiple request before going live.

  Read the article

• Windows 7, Drivers, Cloning and Sysprep

  - by Frank Thornton

  I have Windows 7 working on one machine but when I move it off to the new machine it crashes. If this is a driver issue do I need to download the drivers and install them first? Or do I install Windows 7 on the new machine first then copy the drivers folder over to the other disk so it will boot up correctly? EDIT: I was trying this as well: http://www.todo-backup.com/support/tutorial/redeploy-system-to-dissimilar-hardware.htm EDIT: I tried sysprep but on bootup I see the Windows logo then the system crashes. I can stick the drive back in the old hardware and it runs fine.

  Read the article

• How to get the best LINPACK result and conquer the Top500?

  - by knweiss

  Given a large Linux HPC cluster with hundreds/thousands of nodes. What are your best practices to get the best possible LINPACK benchmark (HPL) result to submit for the Top500 supercomputer list? To give you an idea what kind of answers I would appreciate here are some sub-questions (with links): How to you tune the parameters (N, NB, P, Q, memory-alignment, etc) for the HPL.dat file (without spending too much time trying each possible permutation - esp with large problem sizes N)? Are there any Top500 submission rules to be aware of? What is allowed, what isn't? Which MPI product, which version? Does it make a difference? Any special host order in your MPI machine file? Do you use CPU pinning? How to you configure your interconnect? Which interconnect? Which BLAS package do you use for which CPU model? (Intel MKL, AMD ACML, GotoBLAS2, etc.) How do you prepare for the big run (on all nodes)? Start with small runs on a subset of nodes and then scale up? Is it really necessary to run LINPACK with a big run on all of the nodes (or is extrapolation allowed)? How do you optimize for the latest Intel/AMD CPUs? Hyperthreading? NUMA? Is it worth it to recompile the software stack or do you use precompiled binaries? Which settings? Which compiler optimizations, which compiler? (What about profile-based compilation?) How to get the best result given only a limited amount of time to do the benchmark run? (You can block a huge cluster forever) How do you prepare the individual nodes (stopping system daemons, freeing memory, etc)? How do you deal with hardware faults (ruining a huge run)? Are there any must-read documents or websites about this topic? E.g. I would love to hear about some background stories of some of the current Top500 systems and how they did their LINPACK benchmark. I deliberately don't want to mention concrete hardware details or discuss hardware recommendations because I don't want to limit the answers. However, feel free to mention hints e.g. for specific CPU models.

  Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >