Search Results

Search found 9484 results on 380 pages for 'np complete'.

Page 258/380 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

  • Configuring postfix with Gmail

    - by MultiformeIngegno
    This is what I did.. sudo apt-get install postfix This is my /etc/postfix/main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = tsXXX561.server.topcloud.it alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = [smtp.gmail.com]:587 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only default_transport = smtp relay_transport = smtp inet_protocols = all # SASL Settings smtp_use_tls=yes smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_tls_CAfile = /etc/postfix/cacert.pem Then I created the file /etc/mailname with my hostname as content: tsXXX561.server.topcloud.it Then I created the file /etc/postfix/sasl_passwd: [smtp.gmail.com]:587 [email protected]:gmail_password Then sudo postmap /etc/postfix/sasl/passwd sudo cat /etc/ssl/certs/Thawte_Premium_Server_CA.pem | sudo tee -a /etc/postfix/cacert.pem service postfix restart Still sends nothing... I'm on Ubuntu Server 12.04.

    Read the article

  • Host system resets (crashes) when using VMWare or VirtualBox and 64-bit guest systems

    - by sinni800
    I have been trying to install virtual systems on VMWare for a while now and encountered strange behaviour from my PC. The behaviour is as follows: On "automatic" virtualization mode it either outputs a cryptic error message (can MAYBE give later, if I can reproduce) right on startup (before even the BIOS) or it resets the complete HOST system (blackscreen, bios...) If I install a Windows XP on it it works well on "binary translation" mode. If I try installing Linux on it, in "binary translation" mode it crashes 1 or 2 seconds after I hit enter on the GRUB selection screen (after the first page of kernel messages rolled in) Using VirtualBox it crashes right in the BIOS. It gave me a Bluescreen though! 0x00000101: CLOCK_WATCHDOG_TIMEOUT: a clock interrupt was not received on a secondary processor within the allocated time interval NEWS: I tried VirtualBox again and it did not completely crash the computer this time. It gave me a critical error and a log file: http://pastebin.com/yKZSDs91 In conclusion, it will crash instantly if VT-x is activated. If not, it seemingly only crashed if I try to install something with 64 bits. Another update: Yes, it ONLY crashes when the guest is 64 bit! What I tried: Reinstalling Windows (my Windows installation was quite broken so it seemed natural. Didn't work though.) New BIOS What I am certain of: Virtualization extensions are activated in the BIOS What my computer specs are: ASUS P8P67 LE mainboard, newest BIOS/EFI firmware Intel Core i5 2500k Ati Radeon HD 5770 16 GB Corsair 1333mhz DDR3 RAM, 4 X 4 GB

    Read the article

  • Flash Backed Write Cache (FBWC) without capacitor pack

    - by Martyn
    I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

    Read the article

  • Recover data from quick formatted DVD-R

    - by Andrii Kalytiiuk
    I need to recover data from quick-formatted DVD-R. Please advise a free of charge option (cheap commercial tools will be ok either). Disk was partially recorded with Windows built in disk recorder and recording most likely was not complete. Afterwards I have inserted partially recorded DVD again and on Windows recorder's message box 'How to use this disk?' selected - 'use for CD/DVD player' and data was completely lost - as new recording session was started. Files of photos were recorded on disk. What I have tried so far: DiskInternals CD-DVD recovery - sees 5 jpg files but can't show preview. Tool is commercial - trial version does not allow to recover files. CDCheck - doesn't see any files and reports errors at attempt to scand DVD CD Recovery Toolbox Free - does not even recognize DVD drive ISO Buster - recognizes two files - one MP3 file for 99% of recorded size and one ARC file for about 100 KB MiniTool Power Data Recovery - Free Edition - does not see any files on DVD Stellar Phoenix CD DVD Data Recovery - does not see any files BinaryBiz Virtual Lab - sees DVD disk but needs license to browse content Please advise how is it possible to recover files from DVD.

    Read the article

  • IIS FTP 7.5 Data Channel Problem (SSL)

    - by user59050
    Hey there I wonder if anyone can get me in the right direction. I am setting up both a FTPS Client and Server, FTPS Server using Microsoft’s iis FTP 7.5. On the client side it will be running on Linux and I am using M2crypto for the openssl wrapping (python). I am worried the problem is on the server side (iis7.5) due to the following discovery : If I host using Filezilla with BOTH the control and data channel being forced to be encrypted it works 100% (100% file transmission), if i use iis as the server everything works up to the point when the data channel takes over... i.e. all data of the retrieved file is already received correctly in my basket! The ftp server just won't send the final '226 Transfer complete.' on the cmd socket. Why? If i force the client or server to close the connection the file is 100% intact....If i use iis 7.5 with forced encryption on control channel all works 100% as long as i don’t force data channel... Here are some screenshots to demo this... Client View after Kill Client : pics @ http://forums.iis.net/p/1172936/1960994.aspx#1960994 Summary : We can establish the connection, do directory listings, start the upload, see the file (0bytes) created on the server but then the client hangs. If we terminate the client, the uploaded file on the server suddenly jumps up to full size.

    Read the article

  • Unable to Align Layers in Photoshop Properly with CS2

    - by Jonathan Sampson
    Cannot Align Semi-Transparent Items? Windows Vista, Photoshop CS2. Steps to repeat: Create new document Fill a circle on a new layer Drop opacity of filled circle to 10% Create new empty layer below circle layer Merge empty layer with filled circle layer Select entire canvas Attempt to align layers to selectionlayer > align layers to selection > vertical centers I get the following error: Could not complete the Vertical Centers command because there are no layers to be moved. Clearly this is not true, as I'm selecting the layer with the semi-translucent ball on it. Now, if you had tried this same command prior to step 5 (when the layer was at 10% opacity) it would have worked. Is there some way around this problem? I need to move layers around that begin as transparent items, with a layer opacity at 100% where 100% of the layers opacity results in showing objects that are themselves not-very opaque. I've confirmed on another machine that this problem doesn't exist in CS3. I may exist in earlier copies of Photoshop, but I only have access to CS2 (has the problem) and CS3 (does not have the problem).

    Read the article

  • Postfix connects to wrong relay?

    - by Eric
    I am trying to set up postfix on my ubuntu server in order to send emails via my isp's smtp server. I seem to have missed something because the mail.log tells me: Jan 19 11:23:11 mediaserver postfix/smtp[5722]: CD73EA05B7: to=<[email protected]>, relay=new.mailia.net[85.183.240.20]:25, delay=6.2, delays=5.7/0.02/0.5/0, dsn=4.7.0, status=deferred (SASL authentication failed; server new.mailia.net[85.183.240.20] said: 535 5.7.0 Error: authentication failed: ) The relay "new.mailia.net[85.183.240.20]:25" was not set up by me. I use "relayhost = smtp.alice.de". Why is postfix trying to connect to a different server? Here is my main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mediaserver alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mediaserver, localhost.localdomain, , localhost relayhost = smtp.alice.de mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all myorigin = /etc/mailname inet_protocols = all sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous Output of postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = mediaserver, localhost.localdomain, , localhost myhostname = mediaserver mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = relayhost = smtp.alice.de sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_generic_maps = hash:/etc/postfix/generic smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

    Read the article

  • VPS Memory Exchausted Even With Light Settings

    - by user101570
    Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

    Read the article

  • User permissions linux. (proftpd / nginx)

    - by user55745
    I've been having a complete nightmare trying to configure proftpd. I've got proftp server working with an sql database. However I want to have any files uploaded able to viewed by the webserver running on the same box. The folders get created in /var/tmp/ as rwx------ 2 ftpuser ftpgroup 4096 Oct 8 20:35 50730c4346512 drwx------ 2 ftpuser ftpgroup 4096 Oct 8 20:38 50730f3a811ca I've tried adding www-data to group with the following usermod -g www-data ftpuser But this doesn't allow the web server access. In proftpd.conf I have the following umask set Umask 0022 It doesn't seem to make a difference what I set that value to. /etc/group (sure I've messed up one of these two but I'm getting desperate) ftpgroup:x:2001:www-data www-data:x:33:ftpgroup /etc/passwd www-data:x:33:33:www-data:/var/www:/bin/sh proftpd:x:108:65534::/var/run/proftpd:/bin/false ftp:x:109:65534::/srv/ftp:/bin/false ftpuser:x:2001:33:proftpd user www-data:/bin/null:/bin/false The ftpuser table in the database has uid / gid set to 2oo1 for both. I'm going absolutely crazy trying to solve this any help would be greatly appreciated. p.s Also, although if I manually connect to the ftp server I can upload files via FileZilla. Although this isn't working for the web-camera, although there is talky talky going on between the server and the camera.

    Read the article

  • How to setup Joomla CMS as a backend for iPhone app

    - by srik
    I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

    Read the article

  • How to setup Joomla CMS as a backend for iPhone app

    - by srik
    I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

    Read the article

  • Why not block ICMP?

    - by Agvorth
    I think I almost have my iptables setup complete on my CentOS 5.3 system. Here is my script... # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP For context, this machine is a Virtual Private Server Web app host. In a previous question, Lee B said that I should "lock down ICMP a bit more." Why not just block it altogether? What would happen if I did that (what bad thing would happen)? If I need to not block ICMP, how could I go about locking it down more?

    Read the article

  • How do I cancel windows server 2003 repair install?

    - by Kilgore2k
    System: Windows 2003 Server Enterprise Scenario: NTDS db is corrupt and all attempts to fix with esentutl fail. Ran chkdsk which seemed to repair disk error and give access to the ntds.dit file but still esentutl fails. (Attached the drive to a different server to run the esentutl) Error: Access to source database '[path to copy of]/ntds.dit' failed with Jet error -1022. Operation terminated with error -1022 (JET_errDiskIO, Disk IO error) after 0.170 seconds. This error occurs on any disk I cpoy the files to including original location in C:\WINDOWS\NTDS\ Now enter the "Stupid!" and "what was I thinking!?" part (must be the late hour...) Stupid: No updated backup - after using a backup I get a network password error in the lsass error. what was I thinking!?: Started the install repair from the original CD but the install fails since the AD fails to start. Now I cant boot into any mode (safe mode, AD restore etc) nor complete the repair install. I would really like to avoid a fresh install since I have the Exchange server on this DC and would rather migrate to a new server than have to start from scratch. Thanks!

    Read the article

  • Best way to create and restore a Drive Image with Windows 7? [closed]

    - by jasondavis
    Possible Duplicate: Want to create a system image I am about to build a new PC. I am a windows 7 user. For years now I have been wanting to install windows and all my favorite software, music, etc., and then make a drive IMAGE and be able to go in 6 months later or WHENEVER I want to start fresh and completely format my drives and restore my IMAGE and have all my settings, programs, etc be just5 like when I created the original image. I know there is many ways to do this but I have never done this 100% successfully and I have about a week to figure out how to do it perfectly for when I build my new PC. I have heard good things about using tried Acronis true image in the PAST for doing what I describe4, I tried using it but, but the newer versions are overly complex and don't even seem to work the way I hoped. I also see that Windows 7 has some sort of drive IMAGE creator itself as well. Does the newer Windows 7 image creator do what I am describing above? If it does do what I am asking for (complete drive image with windows, all programs and settings) saved to an IMAGE file that can easily be restored to ANY hard drive in the future? Please share your experiences, tips, ideas on how to achieve this the easiest and most reliable way please

    Read the article

  • cant remove index.php from url in codeigniter

    - by Ashiq
    iam new in codeigniter frame work,i want to remove index.php from url and tried many times bt its not working..... here is my .htaccess file RewriteEngine on RewriteBase /test/ RewriteCond $1 !^(index\.php|resources|robots\.txt) RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ test/index.php/$1 [L,QSA] iam also change $config['index_page'] = ''; bt when running this i got an error message... Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator at [email protected] to inform them of the time this error occurred, and the actions you performed just before this error. More information about this error may be available in the server error log. here is my appache error log [Sat Jan 05 16:59:53.265625 2013] [core:error] [pid 3976:tid 1152] [client ] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. pls help to solve this........ Thanks

    Read the article

  • I need to preserve a tape using symantec backup exec. I'm aving trouble doing so

    - by MrVimes
    Please forgive me if this is the wrong stack exchange site. Please suggest which one I should post this to if it is. There's an automatic tape machine running in a remote location, with software (symantec backup exec 11d) Recently one of the servers being backed up had problems with its raid controller, so one of the drives has become invisible. I need to preserve the last good backup of that drive so I am trying to replace the tape with the most recent backup of that drive on it with one of the scratch tapes (blank tapes) present in the machine. I've tried the following... Associate the blank media with the media set in question (Wednesday) For the existing media (the tape with the data I want to keep) I click 'move to vault' and move it to the offline vault. I associate it with something other than 'Wednesday' (a media set called 'keep data infinitely...') I then do an inventory on that slot. The above steps I'm led to believe are supposed to put the fresh tape in the slot that had the tape I want to keep in it. But it just keeps showing up as containing the tape I want to keep after the inventory. (after refreshing the device tree) I am a complete newbie with this software. Can you tell me what I'm doing wrong, and/or tell me how to acheive my desired goal Edit: Just want to point out that I did try to get help directly from symantec with this, but having jumped through countless hoops to create an account and create a support ticket my progress was halted by requiring something called a 'tecnical contact id' at the final step with no explanation of what it is or how to get one.

    Read the article

  • How can I confirm that burn process was completed successfully??

    - by infant programmer
    Just now I tried to make a duplicate copy of my Windows XP Pro SP3 CD. I had set 32X speed while the max speed allowed is 48X. And checked "Verify the Data after burning". I didn't observe how much % did it complete. But after 15 mins (which is sufficient period to burn disc), I heard "Fatal Error" sound. When I saw the monitor, There was a message box which was showing "Error while burning Disc", I saved the error log which you can find here click_me. How do I acknowledge that burning process is done?? Well. my PC is able to read the CD and CD is bootable too.. I am not sure .. whether the burning process got failed or the verify Process! Please let me know if you have come across or aware of such situation .. As it is XP installation CD .. I don't want to do trial and error method. regards,

    Read the article

  • Macports install of ack doesn't create correct executable

    - by user1664196
    I am trying to install p5-app-ack port from Mac Ports, but it seems it doesn't create a /opt/local/bin/ack binary at the end: $ sudo port search *app-ack Password: p5-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.8-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.10-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.12-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.14-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.16-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories Found 6 ports. $ perl --version This is perl 5, version 12, subversion 4 (v5.12.4) built for darwin-thread-multi-2level Copyright 1987-2010, Larry Wall Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page. $ sudo port install p5-app-ack ---> Computing dependencies for p5-app-ack ---> Cleaning p5-app-ack ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 35.0% ---> No broken files found. $ $ ls /opt/local/bin/ac* /opt/local/bin/ack-5.12 /opt/local/bin/aclocal /opt/local/bin/aclocal-1.12 /opt/local/bin/activation-client /opt/local/bin/acyclic $ which ack $ ack -bash: ack: command not found Update If I then try to install p5.12-app-ack afterwards, I get $ sudo port install p5.12-app-ack Password: ---> Computing dependencies for p5.12-app-ack ---> Cleaning p5.12-app-ack ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. $

    Read the article

  • Storing Windows Updates for reuse

    - by Saiyine
    At work we update lots of computers using Windows Update. Windows XP and 7 all day long, rarely some Vista. We do it through a corporate proxy, as connecting them to a domain to build a Wsus server is out of the question, so we download about two gigabytes a day of the very same updates everyday. I've tried WSUS Offline. It's pretty complete but when it finishes it's common to be still missing hundreds of megabytes of updates, because its intention is not to fully update a system but to install the critical updates, as the developers explain in the forums. Now I'm trying with Autoupdater. It's far worse, with poor capabilities for non-English Windows XP, but at least it gives the option to install non critical updates in Windows 7. It still misses hundres of megabytes of updates after fully updating the system. And finally, both doesn't install the driver related updates of Windows 7, so they at most save us a couple of hundreds of megabytes and a reboot (with the associated login to the computer and to the proxy) out of three or four. So, is it possible to somewhat extract the installed updates in a Windows 7 system and not having to download the same updates again and again at least with machines with the same hardware? Or even better, a generic package with all the updates?

    Read the article

  • Enable bitlocker an save key to share

    - by user273694
    I have searched all over the web but cannot find a complete answer to this: How to enable Bitlocker on a laptop with TPM, and store a file with the Bitlocker recovery key and TPM password by USING THE manage-bde command line tool. The file should be the same as when created in the Bitlocker manager UI. I DO NOT want to save to AD. The same question was asked here but was not answered correctly. The goal is to write a script to be used with an endpoint manager. I have tried the following: manage-bde -on C: Works fine, but does not create or save a key. manage-bde -on C: -rk C:\myfolder\ and manage-bde -on C: -RecoveryKey C:\myfolder\ -rp The output from the last two methods state that a key has been saved to c:\myfolder and so on, but that is not the case. It also says that I have to: Save the password in a secure location Insert a USB flash drive with an external key file into the computer. Restart and run hardware test type "manage-bde -status" to check if the hardware test succeeded After a restart, I get an error saying that Bitlocker could not be enabled because the bitlocker startup key or recovery kpassword cannot be found on the USB device.... C: was not encrypted. Why am I asked to insert a USB?? I simply want to encrypt the hard drive and save the recovery information to a file automatically. Is that too much to ask? Help please!

    Read the article

  • Apache and MySQL not working well after extending filesystem

    - by xtrimsky
    I had 4Gb on my /var (/dev/mapper/vg00-var) filesystem, and I wanted to extend it to 160Gb. I did it following this tutorial: http://faq.1and1.com/dedicated_servers/root_server/linux_admin_help/7.html Now I have 160: Filesystem Size Used Avail Use% Mounted on /dev/md1 4.0G 424M 3.6G 11% / /dev/mapper/vg00-usr 4.3G 1.4G 3.0G 32% /usr /dev/mapper/vg00-var 198G 6.5G 192G 4% /var /dev/mapper/vg00-home 4.3G 4.4M 4.3G 1% /home none 1.1G 0 1.1G 0% /tmp Now I have a problem, in order for Apache to work, each time I reboot, I need to also reboot apache: "apachectl -k restart" which is already terrible. I think this is because /var contains the htdocs The worst part is, mysql is not starting at all. Mysql has some files also in /var What have I done wrong ?? :( Thank you EDIT: Attaching /var/log/mysqld.log: 120602 11:17:44 InnoDB: Waiting for the background threads to start 120602 11:17:45 InnoDB: 1.1.8 started; log sequence number 8354009 120602 11:17:45 [ERROR] /usr/libexec/mysqld: unknown variable 'set-variable=local-infile=0' 120602 11:17:45 [ERROR] Aborting 120602 11:17:45 InnoDB: Starting shutdown... 120602 11:17:46 InnoDB: Shutdown completed; log sequence number 8354009 120602 11:17:46 [Note] /usr/libexec/mysqld: Shutdown complete 120602 11:17:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended

    Read the article

  • How to connect via SSH to a linux mint system that is connected via OpenVPN

    - by Hilyin
    Is there a way to make SSH port not get sent through VPN so when my computer is connected to a VPN, it can still be remoted in via SSH from its non-VPN IP? I am using Mint Linux 13. Thank you for your help! This is the instructions I followed to setup the VPN: Open Terminal Type: sudo apt-get install network-manager-openvpn Press Y to continue. Type: sudo restart network-manager Download BTGuard certificate (CA) by typing: sudo wget -O /etc/openvpn/btguard.ca.crt http://btguard.com/btguard.ca.crt Click on the Network Manager icon, expand VPN Connections, and choose Configure VPN A Network Connections window will appear with the VPN tab open. Click Add. 8. A Choose A VPN Connection Type window will open. Select OpenVPN in the drop-down menu and click Create.. . In the Editing VPN connection window, enter the following: Connection name: BTGuard VPN Gateway: vpn.btguard.com Optional: Manually select your server location by using ca.vpn.btguard.com for Canada or eu.vpn.btguard.com for Germany. Type: select Password User name: username Password: password CA Certificate: browse and select this file: /etc/openvpn/btguard.ca.crt Click Advanced... near the bottom of the window. Under the General tab, check the box next to Use a TCP connection Click OK, then click Apply. Setup complete! How To Connect Click on the Network Manager icon in the panel bar. Click on VPN Connections Select BTGuard VPN The Network Manager icon will begin spinning. You may be prompted to enter a password. If so, this is your system account keychain password, NOT your BTGuard password. Once connected, the Network Manager icon will have a lock next to it indicating you are browsing securely with BTGuard.

    Read the article

  • why won't php 5.3.3 compile libphp5.so on redhat ent

    - by spatel
    I'm trying to upgrade to php 5.3.3 from php 5.2.13. However, the apache module, libphp5.so will not be compiled. Below is a output I got along with the configure options I used. The configure statement is a reduced version of what I normally use. ========== './configure' '--disable-debug' '--disable-rpath' '--with-apxs2=/usr/local/apache2/bin/apxs' ... ** ** ** Warning: inter-library dependencies are not known to be supported. ** ** ** All declared inter-library dependencies are being dropped. ** ** ** Warning: libtool could not satisfy all declared inter-library ** ** ** dependencies of module libphp5. Therefore, libtool will create ** ** ** a static module, that should work as long as the dlopening ** ** ** application is linked with the -dlopen flag. copying selected object files to avoid basename conflicts... Generating phar.php Generating phar.phar PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled. clicommand.inc pharcommand.inc directorytreeiterator.inc directorygraphiterator.inc invertedregexiterator.inc phar.inc Build complete. Don't forget to run 'make test'. ============= php 5.2.13 recompiles just fine so something is up with 5.3.3. Any help would be greatly appreciated!!

    Read the article

  • Exchange emails not delivering for one user

    - by Cylindric
    We have an Exchange infrastructure going through a migration from 2003 SP2 (call it ExOld) to 2010 (ExNew). All users are now on the new server, but mail is still being directed to ExOld until testing is complete. ExNew sends emails directly to the internet. For one particular user, emails don't seem to be being reliably delivered, but the odd thing is that it's not all emails. I can see external emails in his inbox. If I send an internal email it works fine. If I send an email from Gmail to him it doesn't get through. If I telnet from outside to ExOld I can send an email to him. If I telnet from outside to ExNew I can send an email to him. This is a transcript that results in a successful send: 220 ExOldName Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Mon, 22 Oct 2012 10:55:26 +0100 EHLO test.com 500 5.3.3 Unrecognized command EHLO test.com 250-ExOldFQDN Hello [MyTestExternalIp] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] notify=success,failure 250 2.1.5 [email protected] DATA 354 Start mail input; end with . Subject:Test 1056 Test 10:56 . 250 2.6.0 Queued mail for delivery quit 221 2.0.0 ExOldFQDN Service closing transmission channel Emails go through Symantec Cloud, but their "Track and Trace" shows the messages going through, with a "delivered ok" log entry. 2012-10-22 09:19:56 Connection from: 209.85.212.171 (mail-wi0-f171.google.com) 2012-10-22 09:19:56 Sending server HELO string:mail-wi0-f171.google.com 2012-10-22 09:19:56 Message id:CAE5-_4hzGpY2kXFbzxu7gzEUSj5BAvi+BB5q1Gjb6UUOXOWT3g@mail.gmail.com 2012-10-22 09:19:56 Message reference: 135089759500000177171130001194006 2012-10-22 09:19:56 Sender: [email protected] 2012-10-22 09:19:56 Recipient: [email protected] 2012-10-22 09:20:26 SMTP Status: OK 2012-10-22 09:19:56 Delivery attempt #1 (final) 2012-10-22 09:19:56 Recipient server: ExOldIP (ExOldIP) 2012-10-22 09:19:56 Response: 250 2.6.0 Queued mail for delivery I'm not sure where to look on the old (or new) server for information as to where the mails are ending up.

    Read the article

  • Log backups "stalling" on SQL 2008?

    - by MattK
    I have interited a box running SQL Server 2008 and Windows 2003, and have had a few events where largeish (35GB) log backups "stall", both before and after the installation of SQL 2008 SP1. The server log ships to a standby, so regular log backups are taken at 15 minute intervals. However, after an index reorg causes the log to grow to about 35GB (on a DB with about 17GB of data), the next log backup runs to ~95% completion, then seems to stop. The process shows as suspended, with a wait state of BACKUPIO. CPU, read, and write activity on the SPID also does not change, and the process stays in this state for hours, when normally a backup of this size should complete in about 20 minutes. This server has a single RAID-1 volume, thus the source database files and destination backup files are on the same volume. However, I cannot determine if another process is blocking the backup. The backup SPID cannot be killed, and the only way to terminate the log backup and clear the lock on the backup file is to cycle the SQL Server service. There was one event where the backup terminated completely, with an error that another process had locked the backup file, but no details about what that process was. Can anyone suggest a cause or diagnostic process to this situation?

    Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >