Search Results

Search found 19425 results on 777 pages for 'output clause'.

Page 258/777 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

• Parse JSON in C#

  - by Ender

  I'm trying to parse some JSON data from the Google AJAX Search API. I have this URL and I'd like to break it down so that the results are displayed. I've currently written this code, but I'm pretty lost in regards of what to do next, although there are a number of examples out there with simplified JSON strings. Being new to C# and .NET in general I've struggled to get a genuine text output for my ASP.NET page so I've been recommended to give JSON.NET a try. Could anyone point me in the right direction to just simply writing some code that'll take in JSON from the Google AJAX Search API and print it out to the screen? EDIT: I think I've made some progress in regards to getting some code working using DataContractJsonSerializer. Here is the code I have so far. Any advice on whether this is close to working and/or how I would output my results in a clean format? EDIT 2: I've followed the advice from Dreas Grech and the StackOverflowException has gone. However, now I am getting no output. Any ideas on where to go next? EDIT 3: ALL FIXED! All results are working fine. Thank you again Dreas Grech! using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.ServiceModel.Web; using System.Runtime.Serialization; using System.Runtime.Serialization.Json; using System.IO; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { GoogleSearchResults g1 = new GoogleSearchResults(); const string json = @"{""responseData"": {""results"":[{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.cheese.com/"",""url"":""http://www.cheese.com/"",""visibleUrl"":""www.cheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:bkg1gwNt8u4J:www.cheese.com"",""title"":""\u003cb\u003eCHEESE\u003c/b\u003e.COM - All about \u003cb\u003echeese\u003c/b\u003e!."",""titleNoFormatting"":""CHEESE.COM - All about cheese!."",""content"":""\u003cb\u003eCheese\u003c/b\u003e - everything you want to know about it. Search \u003cb\u003echeese\u003c/b\u003e by name, by types of milk, by textures and by countries.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://en.wikipedia.org/wiki/Cheese"",""url"":""http://en.wikipedia.org/wiki/Cheese"",""visibleUrl"":""en.wikipedia.org"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:n9icdgMlCXIJ:en.wikipedia.org"",""title"":""\u003cb\u003eCheese\u003c/b\u003e - Wikipedia, the free encyclopedia"",""titleNoFormatting"":""Cheese - Wikipedia, the free encyclopedia"",""content"":""\u003cb\u003eCheese\u003c/b\u003e is a food consisting of proteins and fat from milk, usually the milk of cows, buffalo, goats, or sheep. It is produced by coagulation of the milk \u003cb\u003e...\u003c/b\u003e""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.ilovecheese.com/"",""url"":""http://www.ilovecheese.com/"",""visibleUrl"":""www.ilovecheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:GBhRR8ytMhQJ:www.ilovecheese.com"",""title"":""I Love \u003cb\u003eCheese\u003c/b\u003e!, Homepage"",""titleNoFormatting"":""I Love Cheese!, Homepage"",""content"":""The American Dairy Association\u0026#39;s official site includes recipes and information on nutrition and storage of \u003cb\u003echeese\u003c/b\u003e.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.gnome.org/projects/cheese/"",""url"":""http://www.g

  Read the article

• Regular expression to remove one parameter from query string

  - by Kip

  I'm looking for a regular expression to remove a single parameter from a query string, and I want to do it in a single regular expression if possible. Say I want to remove the foo parameter. Right now I use this: /&?foo\=[^&]+/ That works as long as foo is not the first parameter in the query string. If it is, then my new query string starts with an ampersand. (For example, "foo=123&bar=456" gives a result of "&bar=456".) Right now, I'm just checking after the regex if the query string starts with ampersand, and chopping it off if it does. Example edge cases: Input | Output -------------------------+----------------- foo=123 | (empty string) foo=123&bar=456 | bar=456 bar=456&foo=123 | bar=456 abc=789&foo=123&bar=456 | abc=789&bar=456 Edit OK as pointed out in comments there are there are way more edge cases than I originally considered. I got the following regex to work with all of them: /&foo(\=[^&]*)?(?=&|$)|^foo(\=[^&]*)?(&|$)/ This is modified from Mark Byers's answer, which is why I'm accepting that one, but Roger Pate's input helped a lot too. Here is the full suite of test cases I'm using, and a Perl script which tests them. Input | Output -------------------------+------------------- foo | foo&bar=456 | bar=456 bar=456&foo | bar=456 abc=789&foo&bar=456 | abc=789&bar=456 foo= | foo=&bar=456 | bar=456 bar=456&foo= | bar=456 abc=789&foo=&bar=456 | abc=789&bar=456 foo=123 | foo=123&bar=456 | bar=456 bar=456&foo=123 | bar=456 abc=789&foo=123&bar=456 | abc=789&bar=456 xfoo | xfoo xfoo&bar=456 | xfoo&bar=456 bar=456&xfoo | bar=456&xfoo abc=789&xfoo&bar=456 | abc=789&xfoo&bar=456 xfoo= | xfoo= xfoo=&bar=456 | xfoo=&bar=456 bar=456&xfoo= | bar=456&xfoo= abc=789&xfoo=&bar=456 | abc=789&xfoo=&bar=456 xfoo=123 | xfoo=123 xfoo=123&bar=456 | xfoo=123&bar=456 bar=456&xfoo=123 | bar=456&xfoo=123 abc=789&xfoo=123&bar=456 | abc=789&xfoo=123&bar=456 foox | foox foox&bar=456 | foox&bar=456 bar=456&foox | bar=456&foox abc=789&foox&bar=456 | abc=789&foox&bar=456 foox= | foox= foox=&bar=456 | foox=&bar=456 bar=456&foox= | bar=456&foox= abc=789&foox=&bar=456 | abc=789&foox=&bar=456 foox=123 | foox=123 foox=123&bar=456 | foox=123&bar=456 bar=456&foox=123 | bar=456&foox=123 abc=789&foox=123&bar=456 | abc=789&foox=123&bar=456 Test script (Perl) @in = ('foo' , 'foo&bar=456' , 'bar=456&foo' , 'abc=789&foo&bar=456' ,'foo=' , 'foo=&bar=456' , 'bar=456&foo=' , 'abc=789&foo=&bar=456' ,'foo=123' , 'foo=123&bar=456' , 'bar=456&foo=123' , 'abc=789&foo=123&bar=456' ,'xfoo' , 'xfoo&bar=456' , 'bar=456&xfoo' , 'abc=789&xfoo&bar=456' ,'xfoo=' , 'xfoo=&bar=456' , 'bar=456&xfoo=' , 'abc=789&xfoo=&bar=456' ,'xfoo=123', 'xfoo=123&bar=456', 'bar=456&xfoo=123', 'abc=789&xfoo=123&bar=456' ,'foox' , 'foox&bar=456' , 'bar=456&foox' , 'abc=789&foox&bar=456' ,'foox=' , 'foox=&bar=456' , 'bar=456&foox=' , 'abc=789&foox=&bar=456' ,'foox=123', 'foox=123&bar=456', 'bar=456&foox=123', 'abc=789&foox=123&bar=456' ); @exp = ('' , 'bar=456' , 'bar=456' , 'abc=789&bar=456' ,'' , 'bar=456' , 'bar=456' , 'abc=789&bar=456' ,'' , 'bar=456' , 'bar=456' , 'abc=789&bar=456' ,'xfoo' , 'xfoo&bar=456' , 'bar=456&xfoo' , 'abc=789&xfoo&bar=456' ,'xfoo=' , 'xfoo=&bar=456' , 'bar=456&xfoo=' , 'abc=789&xfoo=&bar=456' ,'xfoo=123', 'xfoo=123&bar=456', 'bar=456&xfoo=123', 'abc=789&xfoo=123&bar=456' ,'foox' , 'foox&bar=456' , 'bar=456&foox' , 'abc=789&foox&bar=456' ,'foox=' , 'foox=&bar=456' , 'bar=456&foox=' , 'abc=789&foox=&bar=456' ,'foox=123', 'foox=123&bar=456', 'bar=456&foox=123', 'abc=789&foox=123&bar=456' ); print "Succ | Input | Output | Expected \n"; print "-----+--------------------------+--------------------------+-------------------------\n"; for($i=0; $i <= $#in; $i++) { $out = $in[$i]; $out =~ s/_PUT_REGEX_HERE_//; $succ = ($out eq $exp[$i] ? 'PASS' : 'FAIL'); #if($succ eq 'FAIL') #{ printf("%s | %- 24s | %- 24s | %- 24s\n", $succ, $in[$i], $out, $exp[$i]); #} }

  Read the article

• Silverlight and PHP nuSOAP communication problem

  - by Ummar

  I am writting a silverlight application in which I want to call the php webservice written using NuSOAP. here is the WSDL of webservice <?xml version="1.0" encoding="ISO-8859-1" ?> - <definitions xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="urn:currencywebservice" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="urn:currencywebservice"> - <types> - <xsd:schema targetNamespace="urn:currencywebservice"> <xsd:import namespace="http://schemas.xmlsoap.org/soap/encoding/" /> <xsd:import namespace="http://schemas.xmlsoap.org/wsdl/" /> </xsd:schema> </types> <message name="GetAllCurrenciesRequest" /> - <message name="GetAllCurrenciesResponse"> <part name="return" type="xsd:string" /> </message> - <portType name="currencywebservicePortType"> - <operation name="GetAllCurrencies"> <documentation>Get all currencies available</documentation> <input message="tns:GetAllCurrenciesRequest" /> <output message="tns:GetAllCurrenciesResponse" /> </operation> </portType> - <binding name="currencywebserviceBinding" type="tns:currencywebservicePortType"> <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" /> - <operation name="GetAllCurrencies"> <soap:operation soapAction="urn:currencywebservice#GetAllCurrencies" style="rpc" /> - <input> <soap:body use="literal" namespace="urn:currencywebservice" /> </input> - <output> <soap:body use="literal" namespace="urn:currencywebservice" /> </output> </operation> </binding> - <service name="currencywebservice"> - <port name="currencywebservicePort" binding="tns:currencywebserviceBinding"> <soap:address location="http://localhost/extras/currency/currencyservice.php" /> </port> </service> </definitions> When I call the webservice it gives an exception The content type text/html of response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly The php side of service is <?php // Pull in the NuSOAP code require_once('../../lib/tools/nusoap/nusoap.php'); $ns = "urn:currencywebservice"; // Create the server instance $server = new soap_server(); // Initialize WSDL support $server->configureWSDL('currencywebservice', $ns); $server->xml_encoding = "utf-8"; $server->soap_defencoding = "utf-8"; $server->wsdl->schemaTargetNamespace = $ns; $server->register('GetAllCurrencies', array(), array('return' => 'xsd:string'), $ns, $ns."#GetAllCurrencies", 'rpc', 'literal', 'Get all currencies available'); // Define the method as a PHP function function GetAllCurrencies() { return "test return"; } // Use the request to (try to) invoke the service header('Content-Type: text/xml; charset=utf8'); $server->service($HTTP_RAW_POST_DATA); ?> Please help me out what is this problem?

  Read the article

• How to get maven gwt 2.0 build working

  - by Pieter Breed

  EDIT: Added some of the output of the mvn -X -e commands at the end My company is developing a GWT application. We've been using maven 2 and GWT 1.7 successfully for quite a while. We recently decided to upgrade to GWT 2.0. We've already updated the eclipse project and we are able to successfully run the application in dev-mode. We are struggling to get the application built using maven though. I'm hoping somebody can tell me what I'm doing wrong here since I'm running out of time on this. The exacty bit of the output that worries me is the 'GWT compilation skipped' message: [INFO] Copying 119 resources [INFO] [compiler:compile {execution: default-compile}] [INFO] Compiling 704 source files to K:\iCura\assessor\target\classes [INFO] [gwt:compile {execution: default}] [INFO] using GWT jars for specified version 2.0.0 [INFO] establishing classpath list (scope = compile) [INFO] com.curasoftware.assessor.Assessor is up to date. GWT compilation skipped [INFO] [jspc:compile {execution: jspc}] [INFO] Built File: \index.jsp I'm pasting the gwt-maven-plugin section below. If you need anything else please ask. <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>gwt-maven-plugin</artifactId> <version>1.2</version> <configuration> <localWorkers>1</localWorkers> <warSourceDirectory>${basedir}/war</warSourceDirectory> <logLevel>ALL</logLevel> <module>${cura.assessor.module}</module> <!-- use style OBF for prod --> <style>OBFUSCATED</style> <extraJvmArgs>-Xmx2048m -Xss1024k</extraJvmArgs> <gwtVersion>${version.gwt}</gwtVersion> <disableCastChecking>true</disableCastChecking> <soyc>false</soyc> </configuration> <executions> <execution> <goals> <!-- plugin goals --> <goal>clean</goal> <goal>compile</goal> </goals> </execution> </executions> </plugin> I executed mvn clean install -X -e and this is some of the output that I get: [DEBUG] Configuring mojo 'org.codehaus.mojo:gwt-maven-plugin:1.2:compile' --> [DEBUG] (f) disableCastChecking = true [DEBUG] (f) disableClassMetadata = false [DEBUG] (f) draftCompile = false [DEBUG] (f) enableAssertions = false [DEBUG] (f) extra = K:\iCura\assessor\target\extra [DEBUG] (f) extraJvmArgs = -Xmx2048m -Xss1024k [DEBUG] (f) force = false [DEBUG] (f) gen = K:\iCura\assessor\target\.generated [DEBUG] (f) generateDirectory = K:\iCura\assessor\target\generated-sources\gwt [DEBUG] (f) gwtVersion = 2.0.0 [DEBUG] (f) inplace = false [DEBUG] (f) localRepository = Repository[local|file://K:/iCura/lib] [DEBUG] (f) localWorkers = 1 [DEBUG] (f) logLevel = ALL [DEBUG] (f) module = com.curasoftware.assessor.Assessor [DEBUG] (f) project = MavenProject: com.curasoftware.assessor:assessor:3.5.0.0 @ K:\iCura\assessor\pom.xml [DEBUG] (f) remoteRepositories = [Repository[gwt-maven|http://gwt-maven.googlecode.com/svn/trunk/mavenrepo/], Repository[main-maven|http://www.ibiblio.org/maven2/], Repository[central|http://repo1.maven.org/maven2]] [DEBUG] (f) skip = false [DEBUG] (f) sourceDirectory = K:\iCura\assessor\src [DEBUG] (f) soyc = false [DEBUG] (f) style = OBFUSCATED [DEBUG] (f) treeLogger = false [DEBUG] (f) validateOnly = false [DEBUG] (f) warSourceDirectory = K:\iCura\assessor\war [DEBUG] (f) webappDirectory = K:\iCura\assessor\target\assessor [DEBUG] -- end configuration -- and then this: [DEBUG] SOYC has been disabled by user [DEBUG] GWT module com.curasoftware.assessor.Assessor found in K:\iCura\assessor\src [INFO] com.curasoftware.assessor.Assessor is up to date. GWT compilation skipped [DEBUG] com.curasoftware.assessor:assessor:war:3.5.0.0 (selected for null) [DEBUG] com.curasoftware.dto:dto-gen:jar:3.5.0.0:compile (selected for compile) ... It's finding the correct sourceDirectory. That folders has a 'com' folder within which ultimately is the source of the application organized in folders as per the package structure.

  Read the article

• VFP Unit Matrix Multiply problem on the iPhone

  - by Ian Copland

  Hi. I'm trying to write a Matrix3x3 multiply using the Vector Floating Point on the iPhone, however i'm encountering some problems. This is my first attempt at writing any ARM assembly, so it could be a faily simple solution that i'm not seeing. I've currently got a small application running using a maths library that i've written. I'm investigating into the benifits using the Vector Floating Point Unit would provide so i've taken my matrix multiply and converted it to asm. Previously the application would run without a problem, however now my objects will all randomly disappear. This seems to be caused by the results from my matrix multiply becoming NAN at some point. Heres the code IMatrix3x3 operator*(IMatrix3x3 & _A, IMatrix3x3 & _B) { IMatrix3x3 C; //C++ code for the simulator #if TARGET_IPHONE_SIMULATOR == true C.A0 = _A.A0 * _B.A0 + _A.A1 * _B.B0 + _A.A2 * _B.C0; C.A1 = _A.A0 * _B.A1 + _A.A1 * _B.B1 + _A.A2 * _B.C1; C.A2 = _A.A0 * _B.A2 + _A.A1 * _B.B2 + _A.A2 * _B.C2; C.B0 = _A.B0 * _B.A0 + _A.B1 * _B.B0 + _A.B2 * _B.C0; C.B1 = _A.B0 * _B.A1 + _A.B1 * _B.B1 + _A.B2 * _B.C1; C.B2 = _A.B0 * _B.A2 + _A.B1 * _B.B2 + _A.B2 * _B.C2; C.C0 = _A.C0 * _B.A0 + _A.C1 * _B.B0 + _A.C2 * _B.C0; C.C1 = _A.C0 * _B.A1 + _A.C1 * _B.B1 + _A.C2 * _B.C1; C.C2 = _A.C0 * _B.A2 + _A.C1 * _B.B2 + _A.C2 * _B.C2; //VPU ARM asm for the device #else //create a pointer to the Matrices IMatrix3x3 * pA = &_A; IMatrix3x3 * pB = &_B; IMatrix3x3 * pC = &C; //asm code asm volatile( //turn on a vector depth of 3 "fmrx r0, fpscr \n\t" "bic r0, r0, #0x00370000 \n\t" "orr r0, r0, #0x00020000 \n\t" "fmxr fpscr, r0 \n\t" //load matrix B into the vector bank "fldmias %1, {s8-s16} \n\t" //load the first row of A into the scalar bank "fldmias %0!, {s0-s2} \n\t" //calulate C.A0, C.A1 and C.A2 "fmuls s17, s8, s0 \n\t" "fmacs s17, s11, s1 \n\t" "fmacs s17, s14, s2 \n\t" //save this into the output "fstmias %2!, {s17-s19} \n\t" //load the second row of A into the scalar bank "fldmias %0!, {s0-s2} \n\t" //calulate C.B0, C.B1 and C.B2 "fmuls s17, s8, s0 \n\t" "fmacs s17, s11, s1 \n\t" "fmacs s17, s14, s2 \n\t" //save this into the output "fstmias %2!, {s17-s19} \n\t" //load the third row of A into the scalar bank "fldmias %0!, {s0-s2} \n\t" //calulate C.C0, C.C1 and C.C2 "fmuls s17, s8, s0 \n\t" "fmacs s17, s11, s1 \n\t" "fmacs s17, s14, s2 \n\t" //save this into the output "fstmias %2!, {s17-s19} \n\t" //set the vector depth back to 1 "fmrx r0, fpscr \n\t" "bic r0, r0, #0x00370000 \n\t" "orr r0, r0, #0x00000000 \n\t" "fmxr fpscr, r0 \n\t" //pass the inputs and set the clobber list : "+r"(pA), "+r"(pB), "+r" (pC) : :"cc", "memory","s0", "s1", "s2", "s8", "s9", "s10", "s11", "s12", "s13", "s14", "s15", "s16", "s17", "s18", "s19" ); #endif return C; } As far as i can see that makes sence. While debugging i've managed to notice that if i were to say _A = C prior to the return and after the ASM, _A will not necessarily be equal to C which has only increased my confusion. I had thought it was possibly due to the pointers I'm giving to the VFPU being incrimented by lines such as "fldmias %0!, {s0-s2} \n\t" however my understanding of asm is not good enough to properly understand the problem, nor to see an alternative approach to that line of code. Anyway, I was hoping someone with a greater understanding than me would be able to see a solution, and any help would be greatly appreciated, thank you :-)

  Read the article

• Problem with System.Diagnostics.Process RedirectStandardOutput to appear in Winforms Textbox in real

  - by Jonathan Websdale

  I'm having problems with the redirected output from a console application being presented in a Winforms textbox in real-time. The messages are being produced line by line however as soon as interaction with the Form is called for, nothing appears to be displayed. Following the many examples on both Stackoverflow and other forums, I can't seem to get the redirected output from the process to display in the textbox on the form until the process completes. By adding debug lines to the 'stringWriter_StringWritten' method and writing the redirected messages to the debug window I can see the messages arriving during the running of the process but these messages will not appear on the form's textbox until the process completes. Grateful for any advice on this. Here's an extract of the code public partial class RunExternalProcess : Form { private static int numberOutputLines = 0; private static MyStringWriter stringWriter; public RunExternalProcess() { InitializeComponent(); // Create the output message writter RunExternalProcess.stringWriter = new MyStringWriter(); stringWriter.StringWritten += new EventHandler(stringWriter_StringWritten); System.Diagnostics.ProcessStartInfo startInfo = new System.Diagnostics.ProcessStartInfo(); startInfo.FileName = "myCommandLineApp.exe"; startInfo.UseShellExecute = false; startInfo.RedirectStandardOutput = true; startInfo.CreateNoWindow = true; startInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden; using (var pProcess = new System.Diagnostics.Process()) { pProcess.StartInfo = startInfo; pProcess.OutputDataReceived += new System.Diagnostics.DataReceivedEventHandler(RunExternalProcess.Process_OutputDataReceived); pProcess.EnableRaisingEvents = true; try { pProcess.Start(); pProcess.BeginOutputReadLine(); pProcess.BeginErrorReadLine(); pProcess.WaitForExit(); } catch (Exception ex) { MessageBox.Show(ex.ToString()); } finally { pProcess.OutputDataReceived -= new System.Diagnostics.DataReceivedEventHandler(RunExternalProcess.Process_OutputDataReceived); } } } private static void Process_OutputDataReceived(object sender, System.Diagnostics.DataReceivedEventArgs e) { if (!string.IsNullOrEmpty(e.Data)) { RunExternalProcess.OutputMessage(e.Data); } } private static void OutputMessage(string message) { RunExternalProcess.stringWriter.WriteLine("[" + RunExternalProcess.numberOutputLines++.ToString() + "] - " + message); } private void stringWriter_StringWritten(object sender, EventArgs e) { System.Diagnostics.Debug.WriteLine(((MyStringWriter)sender).GetStringBuilder().ToString()); SetProgressTextBox(((MyStringWriter)sender).GetStringBuilder().ToString()); } private delegate void SetProgressTextBoxCallback(string text); private void SetProgressTextBox(string text) { if (this.ProgressTextBox.InvokeRequired) { SetProgressTextBoxCallback callback = new SetProgressTextBoxCallback(SetProgressTextBox); this.BeginInvoke(callback, new object[] { text }); } else { this.ProgressTextBox.Text = text; this.ProgressTextBox.Select(this.ProgressTextBox.Text.Length, 0); this.ProgressTextBox.ScrollToCaret(); } } } public class MyStringWriter : System.IO.StringWriter { // Define the event. public event EventHandler StringWritten; public MyStringWriter() : base() { } public MyStringWriter(StringBuilder sb) : base(sb) { } public MyStringWriter(StringBuilder sb, IFormatProvider formatProvider) : base(sb, formatProvider) { } public MyStringWriter(IFormatProvider formatProvider) : base(formatProvider) { } protected virtual void OnStringWritten() { if (StringWritten != null) { StringWritten(this, EventArgs.Empty); } } public override void Write(char value) { base.Write(value); this.OnStringWritten(); } public override void Write(char[] buffer, int index, int count) { base.Write(buffer, index, count); this.OnStringWritten(); } public override void Write(string value) { base.Write(value); this.OnStringWritten(); } }

  Read the article

• Code Golf: Word Search Solver

  - by Maxim Z.

  Note: This is my first Code Golf challenge/question, so I might not be using the correct format below. I'm not really sure how to tag this particular question, and should this be community wiki? Thanks! This Code Golf challenge is about solving word searches! A word search, as defined by Wikipedia, is: A word search, word find, word seek, word sleuth or mystery word puzzle is a word game that is letters of a word in a grid, that usually has a rectangular or square shape. The objective of this puzzle is to find and mark all the words hidden inside the box. The words may be horizontally, vertically or diagonally. Often a list of the hidden words is provided, but more challenging puzzles may let the player figure them out. Many word search puzzles have a theme to which all the hidden words are related. The word searches for this challenge will all be rectangular grids with a list of words to find provided. The words can be written vertically, horizontally, or diagonally. Input/Output The user inputs their word search and then inputs a word to be found in their grid. These two inputs are passed to the function that you will be writing. It is up to you how you want to declare and handle these objects. Using a strategy described below or one of your own, the function finds the specific word in the search and outputs its starting coordinates (simply row number and column number) and ending coordinates. If you find two occurrences of the word, you must output both's set of coordinates. Example Input: A I Y R J J Y T A S V Q T Z E X B X G R Z P W V T B K U F O E A F L V F J J I A G B A J K R E S U R E P U S C Y R S Y K F B B Q Y T K O I K H E W G N G L W Z F R F H L O R W A R E J A O S F U E H Q V L O A Z B J F B G I F Q X E E A L W A C F W K Z E U U R Z R T N P L D F L M P H D F W H F E C G W Z B J S V O A O Y D L M S T C R B E S J U V T C S O O X P F F R J T L C V W R N W L Q U F I B L T O O S Q V K R O W G N D B C D E J Y E L W X J D F X M Word to find: codegolf Output: row 12, column 8 --> row 5, column 1 Strategies Here are a few strategies you might consider using. It is completely up to you to decide what strategy you want to use; it doesn't have to be in this list. Looking for the first letter of the word; on each occurrence, looking at the eight surrounding letters to see whether the next letter of the word is there. Same as above, except looking for a part of a word that has two of the same letter side-by-side. Counting how often each letter of the alphabet is present in the whole grid, then selecting one of the least-occurring letters from the word you have to find and searching for the letter. On each occurrence of the letter, you look at its eight surrounding letters to see whether the next and previous letters of the word is there.

  Read the article

• Should we hire someone who writes C in Perl?

  - by paxdiablo

  One of my colleagues recently interviewed some candidates for a job and one said they had very good Perl experience. Since my colleague didn't know Perl, he asked me for a critique of some code written (off-site) by that potential hire, so I had a look and told him my concerns (the main one was that it originally had no comments and it's not like we gave them enough time). However, the code works so I'm loathe to say no-go without some more input. Another concern is that this code basically looks exactly how I'd code it in C. It's been a while since I did Perl (and I didn't do a lot, I'm more a Python bod for quick scripts) but I seem to recall that it was a much more expressive language than what this guy used. I'm looking for input from real Perl coders, and suggestions for how it could be improved (and why a Perl coder should know that method of improvement). You can also wax lyrical about whether people who write one language in a totally different language should (or shouldn't be hired). I'm interested in your arguments but this question is primarily for a critique of the code. The spec was to successfully process a CSV file as follows and output the individual fields: User ID,Name , Level,Numeric ID pax, Pax Morgan ,admin,0 gt," Turner, George" rubbish,user,1 ms,"Mark \"X-Men\" Spencer","guest user",2 ab,, "user","3" The output was to be something like this (the potential hire's code actually output this): User ID,Name , Level,Numeric ID: [User ID] [Name] [Level] [Numeric ID] pax, Pax Morgan ,admin,0: [pax] [Pax Morgan] [admin] [0] gt," Turner, George " rubbish,user,1: [gt] [ Turner, George ] [user] [1] ms,"Mark \"X-Men\" Spencer","guest user",2: [ms] [Mark "X-Men" Spencer] [guest user] [2] ab,, "user","3": [ab] [] [user] [3] Here is the code they submitted: #!/usr/bin/perl # Open file. open (IN, "qq.in") || die "Cannot open qq.in"; # Process every line. while (<IN>) { chomp; $line = $_; print "$line:\n"; # Process every field in line. while ($line ne "") { # Skip spaces and start with empty field. if (substr ($line,0,1) eq " ") { $line = substr ($line,1); next; } $field = ""; $minlen = 0; # Detect quoted field or otherwise. if (substr ($line,0,1) eq "\"") { $line = substr ($line,1); $pastquote = 0; while ($line ne "") { # Special handling for quotes (\\ and \"). if (length ($line) >= 2) { if (substr ($line,0,2) eq "\\\"") { $field = $field . "\""; $line = substr ($line,2); next; } if (substr ($line,0,2) eq "\\\\") { $field = $field . "\\"; $line = substr ($line,2); next; } } # Detect closing quote. if (($pastquote == 0) && (substr ($line,0,1) eq "\"")) { $pastquote = 1; $line = substr ($line,1); $minlen = length ($field); next; } # Only worry about comma if past closing quote. if (($pastquote == 1) && (substr ($line,0,1) eq ",")) { $line = substr ($line,1); last; } $field = $field . substr ($line,0,1); $line = substr ($line,1); } } else { while ($line ne "") { if (substr ($line,0,1) eq ",") { $line = substr ($line,1); last; } if ($pastquote == 0) { $field = $field . substr ($line,0,1); } $line = substr ($line,1); } } # Strip trailing space. while ($field ne "") { if (length ($field) == $minlen) { last; } if (substr ($field,length ($field)-1,1) eq " ") { $field = substr ($field,0, length ($field)-1); next; } last; } print " [$field]\n"; } } close (IN);

  Read the article

• Flushing a queue using AMQP, Rabbit, and Ruby

  - by jeffshantz

  I'm developing a system in Ruby that is going to make use of RabbitMQ to send messages to a queue as it does some work. I am using: Ruby 1.9.1 Stable RabbitMQ 1.7.2 AMQP gem v0.6.7 (http://github.com/tmm1/amqp) Most of the examples I have seen on this gem have their publish calls in an EM.add_periodic_timer block. This doesn't work for what I suspect is a vast majority of use cases, and certainly not for mine. I need to publish a message as I complete some work, so putting a publish statement in an add_periodic_timer block doesn't suffice. So, I'm trying to figure out how to publish a few messages to a queue, and then "flush" it, so that any messages I've published are then delivered to my subscribers. To give you an idea of what I mean, consider the following publisher code: #!/usr/bin/ruby require 'rubygems' require 'mq' MESSAGES = ["hello","goodbye","test"] AMQP.start do queue = MQ.queue('testq') messages_published = 0 while (messages_published < 50) if (rand() < 0.4) message = MESSAGES[rand(MESSAGES.size)] puts "#{Time.now.to_s}: Publishing: #{message}" queue.publish(message) messages_published += 1 end sleep(0.1) end AMQP.stop do EM.stop end end So, this code simply loops, publishing a message with 40% probability on each iteration of the loop, and then sleeps for 0.1 seconds. It does this until 50 messages have been published, and then stops AMQP. Of course, this is just a proof of concept. Now, my subscriber code: #!/usr/bin/ruby require 'rubygems' require 'mq' AMQP.start do queue = MQ.queue('testq') queue.subscribe do |header, msg| puts "#{Time.now.to_s}: Received #{msg}" end end So, we just subscribe to the queue, and for each message received, we print it out. Great, except that the subscriber only receives all 50 messages when the publisher calls AMQP.stop. Here's the output from my publisher. It has been truncated in the middle for brevity: $ ruby publisher.rb 2010-04-14 21:45:42 -0400: Publishing: test 2010-04-14 21:45:42 -0400: Publishing: hello 2010-04-14 21:45:42 -0400: Publishing: test 2010-04-14 21:45:43 -0400: Publishing: test 2010-04-14 21:45:44 -0400: Publishing: test 2010-04-14 21:45:44 -0400: Publishing: goodbye 2010-04-14 21:45:45 -0400: Publishing: goodbye 2010-04-14 21:45:45 -0400: Publishing: test 2010-04-14 21:45:45 -0400: Publishing: test . . . 2010-04-14 21:45:55 -0400: Publishing: test 2010-04-14 21:45:55 -0400: Publishing: test 2010-04-14 21:45:55 -0400: Publishing: test 2010-04-14 21:45:55 -0400: Publishing: goodbye Next, the output from my subscriber: $ ruby consumer.rb 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received hello 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received goodbye 2010-04-14 21:45:56 -0400: Received goodbye 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test . . . 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received goodbye If you note the timestamps in the output, the subscriber only receives all of the messages once the publisher has stopped AMQP and exited. So, being an AMQP newb, how can I get my messages to deliver immediately? I tried putting AMQP.start and AMQP.stop in the body of the while loop of the publisher, but then only the first message gets delivered -- though strangely, if I turn on logging, there are no error messages reported by the server and the messages do get sent to the queue, but never get received by the subscriber. Suggestions would be much appreciated. Thanks for reading.

  Read the article

• Ruby Rails Mongrel Sever failing to serve OXS1.6

  - by Mark V

  Hi there I'm fairly new to Rails and the Mac, and doing my first deploy... I'm trying to set up my rails app on a brand new Apple mini-server running OXS1.6 (Snow Leopard). It is currently running fine on my new iMac i7 (same OS). I start mongrel with this command: mongrel_rails start -e production -p 3000 -d -a 127.0.0.1 --debug And it starts giving this output in the log/mongrel.log ** Daemonized, any open files are closed. Look at log/mongrel.pid and log/mongrel.log for info. ** Starting Mongrel listening at 127.0.0.1:3000 ** Installing debugging prefixed filters. Look in log/mongrel_debug for the files. ** Starting Rails with production environment... /Library/Ruby/Gems/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:119:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:9: warning: already initialized constant ID_PREFIX /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:10: warning: already initialized constant ADD_ID ** Rails loaded. ** Loading any Rails specific GemPlugins ** Signals ready. TERM => stop. USR2 => restart. INT => stop (no restart). ** Rails signals registered. HUP => reload (without restart). It might not work well. ** Mongrel 1.1.5 available at 127.0.0.1:3000 ** Writing PID file to log/mongrel.pid The output is the same on my dev iMac (including the warnings). The difference is that accessing http://127.0.0.1:3000 on my iMac serves up the app's login page. Where as on the mac mini-server accessing the same results in this error 500 text from mongrel: "We're sorry, but something went wrong." It's as if rails is not working. I'm pretty good at figuring things out if I have some log file messages to direct me, but mongrel.log has no error message (the output remains the same as above), and the log/production.log is empty (which makes me think rails has not started?). My gems are all the same versions between machines and so is the app code; and there are no clues I can see in any of the mongrel_debug logs, except that rails.log on the mac mini-server and the iMac are different. After a start and single access, first is the rails.log from the mac mini-server: D, [2010-04-15T13:45:34.870406 #6914] DEBUG -- : TRACING ON Thu Apr 15 13:45:34 +1200 2010 Thu Apr 15 13:46:08 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_CACHE_CONTROL: max-age=0 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_0; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive While on my iMac it seems the same except for the addition of the HTTP_COOKIE and the HTTP_IF_NONE_MATCH, here is rails.log from my iMac # Logfile created on Thu Apr 15 13:41:42 +1200 2010 by logger.rb/22285 D, [2010-04-15T13:41:42.934088 #2070] DEBUG -- : TRACING ON Thu Apr 15 13:41:42 +1200 2010 Thu Apr 15 13:42:05 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_IF_NONE_MATCH: "\"216cc63ce3c1f286ef8dd4f18f354f6e\"" HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_COOKIE: _ServiceApp_session=BAh7DDonY3VzdG9tZXJfbGlzdF9maWx0ZXJfam9iX3N0YXR1c19pZGn6Og9zZXNzaW9uX2lkIiU0ZTk1ZWZjMmViMGU3NjE2YzA0NDc2YTkxYzJlNDZiOToaY3VycmVudF9jdXN0b21lcl9uYW1lIilUSEUgQ1VTVE9NRVIgTkFNRSBORUVEUyBUTyBCRSBMT0FERUQ6EF9jc3JmX3Rva2VuIjFuT1JMUWk0NlZrWlM3c2lUN3BaWCs5NkhRajhxYnFwRnhzVHVTWXEvUWY0PToZam9iX2xpc3RfZmlsdGVyX3RleHQiADogam9iX2xpc3RfZmlsdGVyX2VtcGxveWVlX2lkafo6HmN1c3RvbWVyX2xpc3RfZmlsdGVyX3RleHQiAA%3D%3D--d01bc5d0b457ad524d16cb3402b5dfed9afce83d HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive Any direction or ideas would be greatly appreciated. Thanks.

  Read the article

• File Fix-it codegolf (GCJ 2010 1B-A)

  - by KirarinSnow

  Last year (2009), the Google Code Jam featured an interesting problem as the first problem in Round 1B: Decision Tree As the problem seemed tailored for Lisp-like languages, we spontaneously had an exciting codegolf here on SO, in which a few languages managed to solve the problem in fewer characters than any Lisp variety, using quite a number of different techniques. This year's Round 1B Problem A (File Fix-it) also seems tailored for a particular family of languages, Unix shell scripts. So continuing the "1B-A tradition" would be appropriate. :p But which language will end up with the shortest code? Let us codegolf and see! Problem description (adapted from official page): You are given T test cases. Each test case contains N lines that list the full path of all directories currently existing on your computer. For example: /home/awesome /home/awesome/wheeeeeee /home/awesome/wheeeeeee/codegolfrocks /home/thecakeisalie Next, you are given M lines that list the full path of directories you would like to create. They are in the same format as the previous examples. You can create a directory using the mkdir command, but you can only do so if the parent directory already exists. For example, to create the directories /pyonpyon/fumufumu/yeahyeah and /pyonpyon/fumufumu/yeahyeahyeah, you would need to use mkdir four times: mkdir /pyonpyon mkdir /pyonpyon/fumufumu mkdir /pyonpyon/fumufumu/yeahyeah mkdir /pyonpyon/fumufumu/yeahyeahyeah For each test case, return the number of times you have to call mkdir to create all the directories you would like to create. Input Input consists of a text file whose first line contains the integer T, the number of test cases. The rest of the file contains the test cases. Each test case begins with a line containing the integers N and M, separated by a space. The next N lines contain the path of each directory currently existing on your computer (not including the root directory /). This is a concatenation of one or more non-empty lowercase alphanumeric strings, each preceded by a single /. The following M lines contain the path of each directory you would like to create. Output For each case, print one line containing Case #X: Y, where X is the case number and Y is the solution. Limits 1 = T = 100. 0 = N = 100. 1 = M = 100. Each path contains at most 100 characters. Every path appears only once in the list of directories already on your computer, or in the list of desired directories. However, a path may appear on both lists, as in example case #3 below. If a directory is in the list of directories already on your computer, its parent directory will also be listed, with the exception of the root directory /. The input file is at most 100,000 bytes long. Example Larger sample test cases may be downloaded here. Input: 3 0 2 /home/sparkle/pyon /home/sparkle/cakes 1 3 /z /z/y /z/x /y/y 2 1 /moo /moo/wheeeee /moo Output: Case #1: 4 Case #2: 4 Case #3: 0 Code Golf Please post your shortest code in any language that solves this problem. Input and output may be handled via stdin and stdout or by other files of your choice. Please include a disclaimer if your code has the potential to modify or delete existing files when executed. Winner will be the shortest solution (by byte count) in a language with an implementation existing prior to the start of Round 1B 2010.

  Read the article

• How to change by using CVGrayscaleMat

  - by Babul

  With the following code the image showed as above is converted as below image... Their it's showing black background with gray lines.....i want white background with gray lines .. Please guide me .. i am new to iPhone Thanks alot in Advance - (void)viewDidLoad { [super viewDidLoad]; // Initialise video capture - only supported on iOS device NOT simulator #if TARGET_IPHONE_SIMULATOR NSLog(@"Video capture is not supported in the simulator"); #else _videoCapture = new cv::VideoCapture; if (!_videoCapture->open(CV_CAP_AVFOUNDATION)) { NSLog(@"Failed to open video camera"); } #endif // Load a test image and demonstrate conversion between UIImage and cv::Mat UIImage *testImage = [UIImage imageNamed:@"testimage.jpg"]; double t; int times = 10; //-------------------------------- // Convert from UIImage to cv::Mat NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; t = (double)cv::getTickCount(); for (int i = 0; i < times; i++) { cv::Mat tempMat = [testImage CVMat]; } t = 1000 * ((double)cv::getTickCount() - t) / cv::getTickFrequency() / times; [pool release]; NSLog(@"UIImage to cv::Mat: %gms", t); //------------------------------------------ // Convert from UIImage to grayscale cv::Mat pool = [[NSAutoreleasePool alloc] init]; t = (double)cv::getTickCount(); for (int i = 0; i < times; i++) { cv::Mat tempMat = [testImage CVGrayscaleMat]; } t = 1000 * ((double)cv::getTickCount() - t) / cv::getTickFrequency() / times; [pool release]; NSLog(@"UIImage to grayscale cv::Mat: %gms", t); //-------------------------------- // Convert from cv::Mat to UIImage cv::Mat testMat = [testImage CVMat]; t = (double)cv::getTickCount(); for (int i = 0; i < times; i++) { UIImage *tempImage = [[UIImage alloc] initWithCVMat:testMat]; [tempImage release]; } t = 1000 * ((double)cv::getTickCount() - t) / cv::getTickFrequency() / times; NSLog(@"cv::Mat to UIImage: %gms", t); // Process test image and force update of UI _lastFrame = testMat; [self sliderChanged:nil]; } - (IBAction)capture:(id)sender { if (_videoCapture && _videoCapture->grab()) { (*_videoCapture) >> _lastFrame; [self processFrame]; } else { NSLog(@"Failed to grab frame"); } } - (void)processFrame { double t = (double)cv::getTickCount(); cv::Mat grayFrame, output; // Convert captured frame to grayscale cv::cvtColor(_lastFrame, grayFrame, cv::COLOR_RGB2GRAY); // Perform Canny edge detection using slide values for thresholds cv::Canny(grayFrame, output, _lowSlider.value * kCannyAperture * kCannyAperture, _highSlider.value * kCannyAperture * kCannyAperture, kCannyAperture); t = 1000 * ((double)cv::getTickCount() - t) / cv::getTickFrequency(); // Display result self.imageView.image = [UIImage imageWithCVMat:output]; self.elapsedTimeLabel.text = [NSString stringWithFormat:@"%.1fms", t]; }

  Read the article

• Can printf change its parameters??

  - by martani_net

  EDIT: complete code with main is here http://codepad.org/79aLzj2H and once again this is were the weird behavious is happening for (i = 0; i<tab_size; i++) { //CORRECT OUTPUT printf("%s\n", tableau[i].capitale); printf("%s", tableau[i].pays); printf("%s\n", tableau[i].commentaire); //WRONG OUTPUT //printf("%s --- %s --- %s |\n", tableau[i].capitale, tableau[i].pays, tableau[i].commentaire); } I have an array of the following strcuture struct T_info { char capitale[255]; char pays[255]; char commentaire[255]; }; struct T_info *tableau; This is how the array is populated int advance(FILE *f) { char c; c = getc(f); if(c == '\n') return 0; while(c != EOF && (c == ' ' || c == '\t')) { c = getc(f); } return fseek(f, -1, SEEK_CUR); } int get_word(FILE *f, char * buffer) { char c; int count = 0; int space = 0; while((c = getc(f)) != EOF) { if (c == '\n') { buffer[count] = '\0'; return -2; } if ((c == ' ' || c == '\t') && space < 1) { buffer[count] = c; count ++; space++; } else { if (c != ' ' && c != '\t') { buffer[count] = c; count ++; space = 0; } else /* more than one space*/ { advance(f); break; } } } buffer[count] = '\0'; if(c == EOF) return -1; return count; } void fill_table(FILE *f,struct T_info *tab) { int line = 0, column = 0; fseek(f, 0, SEEK_SET); char buffer[MAX_LINE]; char c; int res; int i = 0; while((res = get_word(f, buffer)) != -999) { switch(column) { case 0: strcpy(tab[line].capitale, buffer); column++; break; case 1: strcpy(tab[line].pays, buffer); column++; break; default: strcpy(tab[line].commentaire, buffer); column++; break; } /*if I printf each one alone here, everything works ok*/ //last word in line if (res == -2) { if (column == 2) { strcpy(tab[line].commentaire, " "); } //wrong output here printf("%s -- %s -- %s\n", tab[line].capitale, tab[line].pays, tab[line].commentaire); column = 0; line++; continue; } column = column % 3; if (column == 0) { line++; } /*EOF reached*/ if(res == -1) return; } return ; } Edit : trying this printf("%s -- ", tab[line].capitale); printf("%s --", tab[line].pays); printf("%s --\n", tab[line].commentaire); gives me as result -- --abi -- Emirats arabes unis I expect to get Abu Dhabi -- Emirats arabes unis -- Am I missing something?

  Read the article

• How to directly rotate CVImageBuffer image in IOS 4 without converting to UIImage?

  - by Ian Charnas

  I am using OpenCV 2.2 on the iPhone to detect faces. I'm using the IOS 4's AVCaptureSession to get access to the camera stream, as seen in the code that follows. My challenge is that the video frames come in as CVBufferRef (pointers to CVImageBuffer) objects, and they come in oriented as a landscape, 480px wide by 300px high. This is fine if you are holding the phone sideways, but when the phone is held in the upright position I want to rotate these frames 90 degrees clockwise so that OpenCV can find the faces correctly. I could convert the CVBufferRef to a CGImage, then to a UIImage, and then rotate, as this person is doing: Rotate CGImage taken from video frame However that wastes a lot of CPU. I'm looking for a faster way to rotate the images coming in, ideally using the GPU to do this processing if possible. Any ideas? Ian Code Sample: -(void) startCameraCapture { // Start up the face detector faceDetector = [[FaceDetector alloc] initWithCascade:@"haarcascade_frontalface_alt2" withFileExtension:@"xml"]; // Create the AVCapture Session session = [[AVCaptureSession alloc] init]; // create a preview layer to show the output from the camera AVCaptureVideoPreviewLayer *previewLayer = [AVCaptureVideoPreviewLayer layerWithSession:session]; previewLayer.frame = previewView.frame; previewLayer.videoGravity = AVLayerVideoGravityResizeAspectFill; [previewView.layer addSublayer:previewLayer]; // Get the default camera device AVCaptureDevice* camera = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo]; // Create a AVCaptureInput with the camera device NSError *error=nil; AVCaptureInput* cameraInput = [[AVCaptureDeviceInput alloc] initWithDevice:camera error:&error]; if (cameraInput == nil) { NSLog(@"Error to create camera capture:%@",error); } // Set the output AVCaptureVideoDataOutput* videoOutput = [[AVCaptureVideoDataOutput alloc] init]; videoOutput.alwaysDiscardsLateVideoFrames = YES; // create a queue besides the main thread queue to run the capture on dispatch_queue_t captureQueue = dispatch_queue_create("catpureQueue", NULL); // setup our delegate [videoOutput setSampleBufferDelegate:self queue:captureQueue]; // release the queue. I still don't entirely understand why we're releasing it here, // but the code examples I've found indicate this is the right thing. Hmm... dispatch_release(captureQueue); // configure the pixel format videoOutput.videoSettings = [NSDictionary dictionaryWithObjectsAndKeys: [NSNumber numberWithUnsignedInt:kCVPixelFormatType_32BGRA], (id)kCVPixelBufferPixelFormatTypeKey, nil]; // and the size of the frames we want // try AVCaptureSessionPresetLow if this is too slow... [session setSessionPreset:AVCaptureSessionPresetMedium]; // If you wish to cap the frame rate to a known value, such as 10 fps, set // minFrameDuration. videoOutput.minFrameDuration = CMTimeMake(1, 10); // Add the input and output [session addInput:cameraInput]; [session addOutput:videoOutput]; // Start the session [session startRunning]; } - (void)captureOutput:(AVCaptureOutput *)captureOutput didOutputSampleBuffer:(CMSampleBufferRef)sampleBuffer fromConnection:(AVCaptureConnection *)connection { // only run if we're not already processing an image if (!faceDetector.imageNeedsProcessing) { // Get CVImage from sample buffer CVImageBufferRef cvImage = CMSampleBufferGetImageBuffer(sampleBuffer); // Send the CVImage to the FaceDetector for later processing [faceDetector setImageFromCVPixelBufferRef:cvImage]; // Trigger the image processing on the main thread [self performSelectorOnMainThread:@selector(processImage) withObject:nil waitUntilDone:NO]; } }

  Read the article

• Compiling ruby1.9.1 hangs and fills swap!

  - by nfm

  I'm compiling Ruby 1.9.1-p376 under Ubuntu 8.04 server LTS (64-bit), by doing the following: $ ./configure $ make $ sudo make install ./configure works without complaints. make hangs indefinitely until all my RAM and swap is gone. It get stuck after the following output: compiling ripper make[1]: Entering directory `/tmp/ruby1.9.1/ruby-1.9.1-p376/ext/ripper' gcc -I. -I../../.ext/include/x86_64-linux -I../.././include -I../.././ext/ripper -I../.. -I../../. -DRUBY_EXTCONF_H=\"extconf.h\" -fPIC -O2 -g -Wall -Wno-parentheses -o ripper.o -c ripper.c If I run the gcc command by hand, with the -v argument to get verbose output, it hangs after the following: Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.2 --program-suffix=-4.2 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4) /usr/lib/gcc/x86_64-linux-gnu/4.2.4/cc1 -quiet -v -I. -I../../.ext/include/x86_64-linux -I../.././include -I../.././ext/ripper -I../.. -I../../. -DRUBY_EXTCONF_H="extconf.h" ripper.c -quiet -dumpbase ripper.c -mtune=generic -auxbase-strip ripper.o -g -O2 -Wall -Wno-parentheses -version -fPIC -fstack-protector -fstack-protector -o /tmp/ccRzHvYH.s ignoring nonexistent directory "/usr/local/include/x86_64-linux-gnu" ignoring nonexistent directory "/usr/lib/gcc/x86_64-linux-gnu/4.2.4/../../../../x86_64-linux-gnu/include" ignoring nonexistent directory "/usr/include/x86_64-linux-gnu" ignoring duplicate directory "../.././ext/ripper" ignoring duplicate directory "../../." #include "..." search starts here: #include <...> search starts here: . ../../.ext/include/x86_64-linux ../.././include ../.. /usr/local/include /usr/lib/gcc/x86_64-linux-gnu/4.2.4/include /usr/include End of search list. GNU C version 4.2.4 (Ubuntu 4.2.4-1ubuntu4) (x86_64-linux-gnu) compiled by GNU C version 4.2.4 (Ubuntu 4.2.4-1ubuntu4). GGC heuristics: --param ggc-min-expand=47 --param ggc-min-heapsize=32795 Compiler executable checksum: 6e11fa7ca85fc28646173a91f2be2ea3 I just compiled ruby on another computer for reference, and it took about 10 seconds to print the following output (after the above Compiler executable checksum line): COLLECT_GCC_OPTIONS='-v' '-I.' '-I../../.ext/include/i686-linux' '-I../.././include' '-I../.././ext/ripper' '-I../..' '-I../../.' '-DRUBY_EXTCONF_H="extconf.h"' '-D_FILE_OFFSET_BITS=64' '-fPIC' '-O2' '-g' '-Wall' '-Wno-parentheses' '-o' 'ripper.o' '-c' '-mtune=generic' '-march=i486' as -V -Qy -o ripper.o /tmp/cca4fa7R.s GNU assembler version 2.20 (i486-linux-gnu) using BFD version (GNU Binutils for Ubuntu) 2.20 COMPILER_PATH=/usr/lib/gcc/i486-linux-gnu/4.4.1/:/usr/lib/gcc/i486-linux-gnu/4.4.1/:/usr/lib/gcc/i486-linux-gnu/:/usr/lib/gcc/i486-linux-gnu/4.4.1/:/usr/lib/gcc/i486-linux-gnu/:/usr/lib/gcc/i486-linux-gnu/4.4.1/:/usr/lib/gcc/i486-linux-gnu/ LIBRARY_PATH=/usr/lib/gcc/i486-linux-gnu/4.4.1/:/usr/lib/gcc/i486-linux-gnu/4.4.1/:/usr/lib/gcc/i486-linux-gnu/4.4.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/i486-linux-gnu/4.4.1/../../../:/lib/:/usr/lib/ COLLECT_GCC_OPTIONS='-v' '-I.' '-I../../.ext/include/i686-linux' '-I../.././include' '-I../.././ext/ripper' '-I../..' '-I../../.' '-DRUBY_EXTCONF_H="extconf.h"' '-D_FILE_OFFSET_BITS=64' '-fPIC' '-O2' '-g' '-Wall' '-Wno-parentheses' '-o' 'ripper.o' '-c' '-mtune=generic' '-march=i486' I have absolutely no clue what could be going wrong here - any ideas where I should start?

  Read the article

• Issues writing to serial port on MAC OSX using unistd.h in c

  - by Schuyler

  I am trying to write to a bluetooth device on MAC OSX using the unistd.h Linux functions in c. I am connecting fine and writing the first few bytes with success. When I try to write other commands to it (there are bytes added to the write buffer every 15ms), I don't see any results even though the write() function returns 1 (write success). If you start a write and it doesn't finish by the time you try to start another write (since it is non-blocking), could that possibly screw up the initial write? (If so, is there any way to check if a write has completed?) That is the only thing I can think of since the writes are occurring fairly frequently and the first two are successfully sent. qwbyte() simply adds a byte to the output array and increments its length The open port function: BAMid = -1; struct termios options; struct termios originalTTYAttrs; // Open the serial port read/write, nonblocking, with no controlling terminal, and don't wait for a connection. BAMid = open(strPath, O_RDWR | O_NOCTTY | O_NONBLOCK); if (BAMid == -1) { printf("Error opening serial port %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // Issue TIOCEXCL ioctl to prevent additional opens except by root-owned processes. if (ioctl(BAMid, TIOCEXCL) == -1) { printf("Error setting TIOCEXCL on %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // Get the current options and save them so we can restore the default settings later. if (tcgetattr(BAMid, &originalTTYAttrs) == -1) { printf("Error getting tty attributes %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // The serial port attributes such as timeouts and baud rate are set by modifying the termios // structure and then calling tcsetattr() to cause the changes to take effect. Note that the // changes will not become effective without the tcsetattr() call. options = originalTTYAttrs; // Set raw input (non-canonical) mode, with reads blocking until either a single character // has been received or a one second timeout expires. [should be moot since we are leaving it as nonblocking] cfmakeraw(&options); options.c_cc[VMIN] = 1; options.c_cc[VTIME] = 10; cfsetspeed(&options, B57600); // Set 57600 baud options.c_cflag |= CS8; // Use 8 bit words // Cause the new options to take effect immediately. if (tcsetattr(BAMid, TCSANOW, &options) == -1) { printf("Error setting tty attributes %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } //flush old transmissions if (tcflush(BAMid,TCIOFLUSH) == -1) { printf("Error flushing BAM serial port - %s(%d).\n", strerror(errno), errno); } oBufLength = 0; // Ask it to start if (! qwbyte(CmdStart) ) { goto error; } if (! qwbyte(CmdFull) ) { goto error; } //this transmit works txbytes(); printf("success opening port!"); return -1; // Failure path error: if (BAMid != -1) { close(BAMid); } printf("returning an error--%d",errno); return errno; } The write function (txbytes): int i, bufSize, numBytes; if(oBufLength != 0) { //if the output array isn't empty //duplicating the output array and its size so it can //be overwritten while this write is occuring printf("about to transmit: "); for(i = 0; i < oBufLength; i++) { printf(" %u",oBuf[i]); tempBuf[i] = oBuf[i]; } printf("\n"); bufSize = oBufLength; oBufLength = 0; numBytes = write(BAMid, &tempBuf, bufSize); printf("bytes written = %d\n",numBytes); if (numBytes == -1) { printf("Error writing to port - %s(%d).\n", strerror(errno), errno); } return (numBytes 0); } else { return 0; }

  Read the article

• How can I get my Web API app to run again after upgrading to MVC 5 and Web API 2?

  - by Clay Shannon

  I upgraded my Web API app to the funkelnagelneu versions using this guidance: http://www.asp.net/mvc/tutorials/mvc-5/how-to-upgrade-an-aspnet-mvc-4-and-web-api-project-to-aspnet-mvc-5-and-web-api-2 However, after going through the steps (it seems all this should be automated, anyway), I tried to run it and got, "A project with an Output Type of Class Library cannot be started directly" What in Sam Hills Brothers Coffee is going on here? Who said this was a class library? So I opened Project Properties, and changed it (it was marked as "Class Library" for some reason - it either wasn't yesterday, or was and worked fine) to an Output Type of "Windows Application" ("Console Application" and "Class Library" being the only other options). Now it won't compile, complaining: "*Program 'c:\Platypus_Server_WebAPI\PlatypusServerWebAPI\PlatypusServerWebAPI\obj\Debug\PlatypusServerWebAPI.exe' does not contain a static 'Main' method suitable for an entry point...*" How can I get my Web API app back up and running in view of this quandary? UPDATE Looking in packages.config, two entries seem chin-scratch-worthy: <package id="Microsoft.AspNet.Providers" version="1.2" targetFramework="net40" /> <package id="Microsoft.Web.Infrastructure" version="1.0.0.0" targetFramework="net40" /> All the others target net451. Could this be the problem? Should I remove these packages? UPDATE 2 I tried to uninstall the Microsoft.Web.Infrastructure package (its description leads me to believe I don't need it; also, it has no dependencies) via the NuGet package manager, but it tells me, "NuGet failed to install or uninstall the selected package in the following project(s). [mine]" UPDATE 3 I went through the steps in again, and found that I had missed one step. I had to change this entry in the Application web.config File : <dependentAssembly> <assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" /> <bindingRedirect oldVersion="1.0.0.0-5.0.0.0" newVersion="5.0.0.0" /> </dependentAssembly> (from "4.0.0.0" to "5.0.0.0") ...but I still get the same result - it rebuilds/compiles, but won't run, with "A project with an Output Type of Class Library cannot be started directly" UPDATE 4 Thinking about the err msg, that it can't directly open a class library, I thought, "Sure you can't/won't -- this is a web app, not a project. So I followed a hunch, closed the project, and reopened it as a website (instead of reopening a project). That has gotten me further, at least; now I see a YSOD: Could not load file or assembly 'System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. UPDATE 5 Note: The project is now (after being opened as a web site) named "localhost_48614" And...there is no longer a "References" folder...?!?!? As to that YSOD I'm getting, the official instructions (http://www.asp.net/mvc/tutorials/mvc-5/how-to-upgrade-an-aspnet-mvc-4-and-web-api-project-to-aspnet-mvc-5-and-web-api-2) said to do this, and I quote: "Update all elements that contain “System.Web.WebPages.Razor” from version “2.0.0.0” to version“3.0.0.0”." UPDATE 6 When I select Tools Library Package Manager Manage NuGet Packages for Solution now, I get, "Operation failed. Unable to locate the solution directory. Please ensure that the solution has been saved." So I save it, and it saves it with this funky new name (C:\Users\clay\Documents\Visual Studio 2013\Projects\localhost_48614\localhost_48614.sln) I get the Yellow Strip of Enlightenment across the top of the NuGet Package Manager telling me, "Some NuGet packages are missing from this solution. Click to restore from your online package sources." I do (click the "Restore" button, that is), and it downloads the missing packages ... I end up with the 30 packages. I try to run the app/site again, and ... the erstwhile YSOD becomes a compilation error: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.. Argghhhh!!! (and it's not even talk-like-a-pirate day).

  Read the article

• DSP - Problems using the inverse Fast Fourier Transform

  - by Trap

  I've been playing around a little with the Exocortex implementation of the FFT, but I'm having some problems. First, after calculating the inverse FFT of an unchanged frequency spectrum obtained by a previous forward FFT, one would expect to get the original signal back, but this is not the case. I had to figure out that I needed to scale the FFT output to about 1 / fftLength to get the amplitudes ok. Why is this? Second, whenever I modify the amplitudes of the frequency bins before calling the iFFT the signal gets distorted at low frequencies. However, this does not happen if I attenuate all the bins by the same factor. Let me put a very simplified example of the output buffer of a 4-sample FFT: // Bin 0 (DC) FFTOut[0] = 0.0000610351563 FFTOut[1] = 0.0 // Bin 1 FFTOut[2] = 0.000331878662 FFTOut[3] = 0.000629425049 // Central bin FFTOut[4] = -0.0000381469727 FFTOut[5] = 0.0 // Bin 3, this is a negative frequency bin. FFTOut[6] = 0.000331878662 FFTOut[7] = -0.000629425049 The output is composed of pairs of floats, each representing the real and imaginay parts of a single bin. So, bin 0 (array indexes 0, 1) would represent the real and imaginary parts of the DC frequency. As you can see, bins 1 and 3 both have the same values, (except for the sign of the Im part), so I guess these are the negative frequency values, and finally indexes (4, 5) would be the central frequency bin. To attenuate the frequency bin 1 this is what I do: // Attenuate the 'positive' bin FFTOut[2] *= 0.5; FFTOut[3] *= 0.5; // Attenuate its corresponding negative bin. FFTOut[6] *= 0.5; FFTOut[7] *= 0.5; For the actual tests I'm using a 1024-length FFT and I always provide all the samples so no 0-padding is needed. // Attenuate var halfSize = fftWindowLength / 2; float leftFreq = 0f; float rightFreq = 22050f; for( var c = 1; c < halfSize; c++ ) { var freq = c * (44100d / halfSize); // Calc. positive and negative frequency locations. var k = c * 2; var nk = (fftWindowLength - c) * 2; // This kind of attenuation corresponds to a high-pass filter. // The attenuation at the transition band is linearly applied, could // this be the cause of the distortion of low frequencies? var attn = (freq < leftFreq) ? 0 : (freq < rightFreq) ? ((freq - leftFreq) / (rightFreq - leftFreq)) : 1; mFFTOut[ k ] *= (float)attn; mFFTOut[ k + 1 ] *= (float)attn; mFFTOut[ nk ] *= (float)attn; mFFTOut[ nk + 1 ] *= (float)attn; } Obviously I'm doing something wrong but can't figure out what or where.

  Read the article

• c - dereferencing issue

  - by Joe

  Hi, I have simplified an issue that I've been having trying to isolate the problem, but it is not helping. I have a 2 dimensional char array to represent memory. I want to pass a reference to that simulation of memory to a function. In the function to test the contents of the memory I just want to iterate through the memory and print out the contents on each row. The program prints out the first row and then I get seg fault. My program is as follows: #include <stdio.h> #include <stdlib.h> #include <ctype.h> #include <string.h> void test_memory(char*** memory_ref) { int i; for(i = 0; i < 3; i++) { printf("%s\n", *memory_ref[i]); } } int main() { char** memory; int i; memory = calloc(sizeof(char*), 20); for(i = 0; i < 20; i++) { memory[i] = calloc(sizeof(char), 33); } memory[0] = "Mem 0"; memory[1] = "Mem 1"; memory[2] = "Mem 2"; printf("memory[1] = %s\n", memory[1]); test_memory(&memory); return 0; } This gives me the output: memory[1] = Mem 1 Mem 0 Segmentation fault If I change the program and create a local version of the memory in the function by dereferencing the memory_ref, then I get the right output: So: #include <stdio.h> #include <stdlib.h> #include <ctype.h> #include <string.h> void test_memory(char*** memory_ref) { char** memory = *memory_ref; int i; for(i = 0; i < 3; i++) { printf("%s\n", memory[i]); } } int main() { char** memory; int i; memory = calloc(sizeof(char*), 20); for(i = 0; i < 20; i++) { memory[i] = calloc(sizeof(char), 33); } memory[0] = "Mem 0"; memory[1] = "Mem 1"; memory[2] = "Mem 2"; printf("memory[1] = %s\n", memory[1]); test_memory(&memory); return 0; } gives me the following output: memory[1] = Mem 1 Mem 0 Mem 1 Mem 2 which is what I want, but making a local version of the memory is useless because I need to be able to change the values of the original memory from the function which I can only do by dereferencing the pointer to the original 2d char array. I don't understand why I should get a seg fault on the second time round, and I'd be grateful for any advice. Many thanks Joe

  Read the article

• Unknown error sourcing a script containing 'typeset -r' wrapped in command substitution

  - by Bernard Assaf

  I wish to source a script, print the value of a variable this script defines, and then have this value be assigned to a variable on the command line with command substitution wrapping the source/print commands. This works on ksh88 but not on ksh93 and I am wondering why. $ cat typeset_err.ksh #!/bin/ksh unset _typeset_var typeset -i -r _typeset_var=1 DIR=init # this is the variable I want to print When run on ksh88 (in this case, an AIX 6.1 box), the output is as follows: $ A=$(. ./typeset_err.ksh; print $DIR) $ echo $A init When run on ksh93 (in this case, a Linux machine), the output is as follows: $ A=$(. ./typeset_err.ksh; print $DIR) -ksh: _typeset_var: is read only $ print $A ($A is undefined) The above is just an example script. The actual thing I wish to accomplish is to source a script that sets values to many variables, so that I can print just one of its values, e.g. $DIR, and have $A equal that value. I do not know in advance the value of $DIR, but I need to copy files to $DIR during execution of a different batch script. Therefore the idea I had was to source the script in order to define its variables, print the one I wanted, then have that print's output be assigned to another variable via $(...) syntax. Admittedly a bit of a hack, but I don't want to source the entire sub-script in the batch script's environment because I only need one of its variables. The typeset -r code in the beginning is the error. The script I'm sourcing contains this in order to provide a semaphore of sorts--to prevent the script from being sourced more than once in the environment. (There is an if statement in the real script that checks for _typeset_var = 1, and exits if it is already set.) So I know I can take this out and get $DIR to print fine, but the constraints of the problem include keeping the typeset -i -r. In the example script I put an unset in first, to ensure _typeset_var isn't already defined. By the way I do know that it is not possible to unset a typeset -r variable, according to ksh93's man page for ksh. There are ways to code around this error. The favorite now is to not use typeset, but just set the semaphore without typeset (e.g. _typeset_var=1), but the error with the code as-is remains as a curiosity to me, and I want to see if anyone can explain why this is happening. By the way, another idea I abandoned was to grep the variable I need out of its containing script, then print that one variable for $A to be set to; however, the variable ($DIR in the example above) might be set to another variable's value (e.g. DIR=$dom/init), and that other variable might be defined earlier in the script; therefore, I need to source the entire script to make sure I all variables are defined so that $DIR is correctly defined when sourcing.

  Read the article

• Google App Engine + Form Validation

  - by Iwona

  Hi, I would like to do google app engine form validation but I dont know how to do it? I tried like this: from google.appengine.ext.db import djangoforms from django import newforms as forms class SurveyForm(forms.Form): occupations_choices = ( ('1', ""), ('2', "Undergraduate student"), ('3', "Postgraduate student (MSc)"), ('4', "Postgraduate student (PhD)"), ('5', "Lab assistant"), ('6', "Technician"), ('7', "Lecturer"), ('8', "Other" ) ) howreach_choices = ( ('1', ""), ('2', "Typed the URL directly"), ('3', "Site is bookmarked"), ('4', "A search engine"), ('5', "A link from another site"), ('6', "From a book"), ('7', "Other") ) boxes_choices = ( ("des", "Website Design"), ("svr", "Web Server Administration"), ("com", "Electronic Commerce"), ("mkt", "Web Marketing/Advertising"), ("edu", "Web-Related Education") ) name = forms.CharField(label='Name', max_length=100, required=True) email = forms.EmailField(label='Your Email Address:') occupations = forms.ChoiceField(choices=occupations_choices, label='What is your occupation?') howreach = forms.ChoiceField(choices=howreach_choices, label='How did you reach this site?') # radio buttons 1-5 rating = forms.ChoiceField(choices=range(1,6), label='What is your occupation?', widget=forms.RadioSelect) boxes = forms.ChoiceField(choices=boxes_choices, label='Are you involved in any of the following? (check all that apply):', widget=forms.CheckboxInput) comment = forms.CharField(widget=forms.Textarea, required=False) And I wanted to display it like this: template_values = { 'url' : url, 'url_linktext' : url_linktext, 'userName' : userName, 'item1' : SurveyForm() } And I have this error message: Traceback (most recent call last): File "C:\Program Files\Google\google_appengine\google\appengine\ext\webapp_init_.py", line 515, in call handler.get(*groups) File "C:\Program Files\Google\google_appengine\demos\b00213576\main.py", line 144, in get self.response.out.write(template.render(path, template_values)) File "C:\Program Files\Google\google_appengine\google\appengine\ext\webapp\template.py", line 143, in render return t.render(Context(template_dict)) File "C:\Program Files\Google\google_appengine\google\appengine\ext\webapp\template.py", line 183, in wrap_render return orig_render(context) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 168, in render return self.nodelist.render(context) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 705, in render bits.append(self.render_node(node, context)) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 718, in render_node return(node.render(context)) File "C:\Program Files\Google\google_appengine\lib\django\django\template\defaulttags.py", line 209, in render return self.nodelist_true.render(context) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 705, in render bits.append(self.render_node(node, context)) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 718, in render_node return(node.render(context)) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 768, in render return self.encode_output(output) File "C:\Program Files\Google\google_appengine\lib\django\django\template_init_.py", line 757, in encode_output return str(output) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\util.py", line 26, in str return self.unicode().encode(settings.DEFAULT_CHARSET) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\forms.py", line 73, in unicode return self.as_table() File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\forms.py", line 144, in as_table return self._html_output(u'%(label)s%(errors)s%(field)s%(help_text)s', u'%s', '', u'%s', False) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\forms.py", line 129, in _html_output output.append(normal_row % {'errors': bf_errors, 'label': label, 'field': unicode(bf), 'help_text': help_text}) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\forms.py", line 232, in unicode value = value.str() File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\util.py", line 26, in str return self.unicode().encode(settings.DEFAULT_CHARSET) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\widgets.py", line 246, in unicode return u'\n%s\n' % u'\n'.join([u'%s' % w for w in self]) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\widgets.py", line 238, in iter yield RadioInput(self.name, self.value, self.attrs.copy(), choice, i) File "C:\Program Files\Google\google_appengine\lib\django\django\newforms\widgets.py", line 212, in init self.choice_value = smart_unicode(choice[0]) TypeError: 'int' object is unsubscriptable Do You have any idea how I can do this validation in different case? I have tried to do it using this kind of: class ItemUserAnswer(djangoforms.ModelForm): class Meta: model = UserAnswer But I dont know how to add extra labels to this form and it is displayed in one line. Do You have any suggestions? Thanks a lot as it making me crazy why it is still not working:/

  Read the article

• Multidimensional array problem in VHDL?

  - by Nektarios

  I'm trying to use a multidimensional array in VHDL and I'm having a lot of trouble getting it to work properly. My issue is that I've got an array of 17, of 16 vectors, of a given size. What I want to do is create 17 registers that are array of 16 * std_logic_vector of 32 bits (which = my b, 512). So, I'm trying to pass in something to input and output on the register instantiation that tells the compiler/synthesizer that I want to pass in something that is 512 bits worth... Similar to in C if I had: int var[COLS][ROWS][ELEMENTS]; memcpy(&var[3].. // I'm talking about 3rd COL here, passing in memory that is ROWS*ELEMENTS long (My actual declaration is here:) type partial_pipeline_registers_type is array (0 to 16, 0 to 15) of std_logic_vector(iw - 1 downto 0); signal h_blk_pipelined_input : partial_pipeline_registers_type; I tried simply using h_blk_pipelined_input(0) .. up to (16) but this doesn't work. I get the following error, which makes me see that I need to double index in to the array: ERROR:HDLParsers:821 - (at the register) Wrong index type for h_blk_pipelined_input. So then I tried what's below, and I get this error: ERROR:HDLParsers:164 - (at the register code). parse error, unexpected TO, expecting COMMA or CLOSEPAR instantiate_h_pipelined_reg : regn generic map ( N=> b, init => bzeros ) port map ( clk => clk , rst => '0', en => '1', input => h_blk_pipelined_input((i - 1), 0 to 15), output=> h_blk_pipelined_input((i), 0 to 15)); -- Changing 0 to 15 to (0 to 15) has no effect... I'm using XST, and from their documentation (http://www.xilinx.com/itp/xilinx6/books/data/docs/xst/xst0067_9.html), the above should have worked: ...declaration: subtype MATRIX15 is array(4 downto 0, 2 downto 0) of STD_LOGIC_VECTOR (7 downto 0); A multi-dimensional array signal or variable can be completely used: Just a slice of one row can be specified: MATRIX15 (4,4 downto 1) <= TAB_B (3 downto 0); One alternative is that I can create more registers that are 16 times smaller, and instead of trying to do all '0 to 15' at once, I would just do that 15 additional times. However, I think this may lead to inefficiency in synthesis and I don't feel like this is the right solution. EDIT: Tried what Ben said, instantiate_h_m_qa_pipeline_registers: for i in 1 to 16 generate instantiate_h_pipelined_reg : regn generic map ( N=> b, init => bzeros ) port map ( clk => clk , rst => '0', en => '1', input => h_blk_pipelined_input(i - 1), output=> h_blk_pipelined_input(i)); end generate instantiate_h_m_qa_pipeline_registers; The signals are now defined as: type std_logic_block is array (0 to 15) of std_logic_vector(iw - 1 downto 0) ; type partial_pipeline_registers_type is array (0 to 16) of std_logic_block; signal h_blk_pipelined_input : partial_pipeline_registers_type; And the error I get from XST is: ERROR:HDLParsers:800 - ((where the register part is)) Type of input is incompatible with type of h_blk_pipelined_input. I'm able to do everything I was able to do before, using ()() syntax instead of ( , ) so I haven't lost anything going this way, but it still doesn't resolve my problem.

  Read the article

• Calling system commands from Perl

  - by Dan J

  In an older version of our code, we called out from Perl to do an LDAP search as follows: # Pass the base DN in via the ldapsearch-specific environment variable # (rather than as the "-b" paramater) to avoid problems of shell # interpretation of special characters in the DN. $ENV{LDAP_BASEDN} = $ldn; $lcmd = "ldapsearch -x -T -1 -h $gLdapServer" . <snip> " > $lworkfile 2>&1"; system($lcmd); if (($? != 0) || (! -e "$lworkfile")) { # Handle the error } The code above would result in a successful LDAP search, and the output of that search would be in the file $lworkfile. Unfortunately, we recently reconfigured openldap on this server so that a "BASE DC=" is specified in /etc/openldap/ldap.conf and /etc/ldap.conf. That change seems to mean ldapsearch ignores the LDAP_BASEDN environment variable, and so my ldapsearch fails. I've tried a couple of different fixes but without success so far: (1) I tried going back to using the "-b" argument to ldapsearch, but escaping the shell metacharacters. I started writing the escaping code: my $ldn_escaped = $ldn; $ldn_escaped =~ s/\/\\/g; $ldn_escaped =~ s/`/\`/g; $ldn_escaped =~ s/$/\$/g; $ldn_escaped =~ s/"/\"/g; That threw up some Perl errors because I haven't escaped those regexes properly in Perl (the line number matches the regex with the backticks in). Backticks found where operator expected at /tmp/mycommand line 404, at end of line At the same time I started to doubt this approach and looked for a better one. (2) I then saw some Stackoverflow questions (here and here) that suggested a better solution. Here's the code: print("Processing..."); # Pass the arguments to ldapsearch by invoking open() with an array. # This ensures the shell does NOT interpret shell metacharacters. my(@cmd_args) = ("-x", "-T", "-1", "-h", "$gLdapPool", "-b", "$ldn", <snip> ); $lcmd = "ldapsearch"; open my $lldap_output, "-|", $lcmd, @cmd_args; while (my $lline = <$lldap_output>) { # I can parse the contents of my file fine } $lldap_output->close; The two problems I am having with approach (2) are: a) Calling open or system with an array of arguments does not let me pass > $lworkfile 2>&1 to the command, so I can't stop the ldapsearch output being sent to screen, which makes my output look ugly: Processing...ldap_bind: Success (0) additional info: Success b) I can't figure out how to choose which location (i.e. path and file name) to the file handle passed to open, i.e. I don't know where $lldap_output is. Can I move/rename it, or inspect it to find out where it is (or is it not actually saved to disk)? Based on the problems with (2), this makes me think I should return back to approach (1), but I'm not quite sure how to

  Read the article

• Slicing a time range into parts

  - by beporter

  First question. Be gentle. I'm working on software that tracks technicians' time spent working on tasks. The software needs to be enhanced to recognize different billable rate multipliers based on the day of the week and the time of day. (For example, "Time and a half after 5 PM on weekdays.") The tech using the software is only required to log the date, his start time and his stop time (in hours and minutes). The software is expected to break the time entry into parts at the boundaries of when the rate multipliers change. A single time entry is not permitted to span multiple days. Here is a partial sample of the rate table. The first-level array keys are the days of the week, obviously. The second-level array keys represent the time of the day when the new multiplier kicks in, and runs until the next sequential entry in the array. The array values are the multiplier for that time range. [rateTable] => Array ( [Monday] => Array ( [00:00:00] => 1.5 [08:00:00] => 1 [17:00:00] => 1.5 [23:59:59] => 1 ) [Tuesday] => Array ( [00:00:00] => 1.5 [08:00:00] => 1 [17:00:00] => 1.5 [23:59:59] => 1 ) ... ) In plain English, this represents a time-and-a-half rate from midnight to 8 am, regular rate from 8 to 5 pm, and time-and-a-half again from 5 till 11:59 pm. The time that these breaks occur may be arbitrary to the second and there can be an arbitrary number of them for each day. (This format is entirely negotiable, but my goal is to make it as easily human-readable as possible.) As an example: a time entry logged on Monday from 15:00:00 (3 PM) to 21:00:00 (9 PM) would consist of 2 hours billed at 1x and 4 hours billed at 1.5x. It is also possible for a single time entry to span multiple breaks. Using the example rateTable above, a time entry from 6 AM to 9 PM would have 3 sub-ranges from 6-8 AM @ 1.5x, 8AM-5PM @ 1x, and 5-9 PM @ 1.5x. By contrast, it's also possible that a time entry may only be from 08:15:00 to 08:30:00 and be entirely encompassed in the range of a single multiplier. I could really use some help coding up some PHP (or at least devising an algorithm) that can take a day of the week, a start time and a stop time and parse into into the required subparts. It would be ideal to have the output be an array that consists of multiple entries for a (start,stop,multiplier) triplet. For the above example, the output would be: [output] => Array ( [0] => Array ( [start] => 15:00:00 [stop] => 17:00:00 [multiplier] => 1 ) [1] => Array ( [start] => 17:00:00 [stop] => 21:00:00 [multiplier] => 1.5 ) ) I just plain can't wrap my head around the logic of splitting a single (start,stop) into (potentially) multiple subparts.

  Read the article

• Perl: Deleting multiple re-occuring lines where a certain criteria is met

  - by george-lule

  Dear all, I have data that looks like below, the actual file is thousands of lines long. Event_time Cease_time Object_of_reference -------------------------- -------------------------- ---------------------------------------------------------------------------------- Apr 5 2010 5:54PM NULL SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSJN1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=LUGALAMBO_900 Apr 5 2010 5:55PM Apr 5 2010 6:43PM SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSJN1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=LUGALAMBO_900 Apr 5 2010 5:58PM NULL SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSCC1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=BULAGA Apr 5 2010 5:58PM Apr 5 2010 6:01PM SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSCC1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=BULAGA Apr 5 2010 6:01PM NULL SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSCC1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=BULAGA Apr 5 2010 6:03PM NULL SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSJN1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=KAPKWAI_900 Apr 5 2010 6:03PM Apr 5 2010 6:04PM SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSJN1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=KAPKWAI_900 Apr 5 2010 6:04PM NULL SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSJN1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=KAPKWAI_900 Apr 5 2010 6:03PM Apr 5 2010 6:03PM SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSCC1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=BULAGA Apr 5 2010 6:03PM NULL SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSCC1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=BULAGA Apr 5 2010 6:03PM Apr 5 2010 7:01PM SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=BSCC1,BssFunction= BSS_ManagedFunction,BtsSiteMgr=BULAGA As you can see, each file has a header which describes what the various fields stand for(event start time, event cease time, affected element). The header is followed by a number of dashes. My issue is that, in the data, you see a number of entries where the cease time is NULL i.e event is still active. All such entries must go i.e for each element where the alarm cease time is NULL, the start time, the cease time(in this case NULL) and the actual element must be deleted from the file. In the remaining data, all the text starting from word SubNetwork upto BtsSiteMgr= must also go. Along with the headers and the dashes. Final output should look like below: Apr 5 2010 5:55PM Apr 5 2010 6:43PM LUGALAMBO_900 Apr 5 2010 5:58PM Apr 5 2010 6:01PM BULAGA Apr 5 2010 6:03PM Apr 5 2010 6:04PM KAPKWAI_900 Apr 5 2010 6:03PM Apr 5 2010 6:03PM BULAGA Apr 5 2010 6:03PM Apr 5 2010 7:01PM BULAGA Below is a Perl script that I have written. It has taken care of the headers, the dashes, the NULL entries but I have failed to delete the lines following the NULL entries so as to produce the above output. #!/usr/bin/perl use strict; use warnings; $^I=".bak" #Backup the file before messing it up. open (DATAIN,"<george_perl.txt")|| die("can't open datafile: $!"); # Read in the data open (DATAOUT,">gen_results.txt")|| die("can't open datafile: $!"); #Prepare for the writing while (<DATAIN>) { s/Event_time//g; s/Cease_time//g; s/Object_of_reference//g; s/\-//g; #Preceding 4 statements are for cleaning out the headers my $theline=$_; if ($theline =~ /NULL/){ next; next if $theline =~ /SubN/; } else{ print DATAOUT $theline; } } close DATAIN; close DATAOUT; Kindly help point out any modifications I need to make on the script to make it produce the necessary output. Will be very glad for your help Kind regards George.

  Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >