Search Results

Search found 10857 results on 435 pages for 'tab character'.

Page 258/435 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

  • C to C++ Conversion [closed]

    - by Annalyne
    Can someone convert this code to C++, pretty please? :( #include <stdio.h> #include <stdlib.h> #include <time.h> #define WEAPON_ROPE 10 #define WEAPON_REVOLVER 20 #define WEAPON_LEADPIPE 30 #define WEAPON_CANDLESTICK 40 #define WEAPON_KNIFE 50 #define WEAPON_WRENCH 60 #define PEOPLE_MRGREEN 100 #define PEOPLE_MSSCARLET 200 #define PEOPLE_CONLMUSTARD 300 #define PEOPLE_PROFPLUM 400 #define PEOPLE_MISPEACOCK 500 #define PEOPLE_MISWHITE 600 #define PLACE_KITCHEN 1 #define PLACE_HALL 2 #define PLACE_POOLROOM 3 #define PLACE_STUDY 4 #define PLACE_LOUNG 5 #define PLACE_LIBRARY 6 #define PLACE_CONSERVATORY 7 #define PLACE_DINING 8 #define PLACE_BILLIARDS 9 int main() { int die = 0; int players[6][9] = {{0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}}; int allCards[] = {WEAPON_ROPE, WEAPON_REVOLVER, WEAPON_LEADPIPE, WEAPON_CANDLESTICK, WEAPON_CANDLESTICK, WEAPON_KNIFE, WEAPON_WRENCH, PEOPLE_MRGREEN, PEOPLE_MSSCARLET, PEOPLE_CONLMUSTARD, PEOPLE_CONLMUSTARD, PEOPLE_PROFPLUM, PEOPLE_MISPEACOCK, PEOPLE_MISWHITE, PLACE_KITCHEN, PLACE_HALL, PLACE_POOLROOM, PLACE_STUDY, PLACE_LOUNG, PLACE_LIBRARY, PLACE_CONSERVATORY, PLACE_DINING, PLACE_BILLIARDS}; int deckSize = 23; // number of cards in allCards array int count; for (count = 0; count < deckSize; ++count) { printf(", %d", allCards[count]); } // End for // These three array's are so you can put a card back, if need be... int weaponCards[] = {WEAPON_ROPE, WEAPON_REVOLVER, WEAPON_LEADPIPE, WEAPON_CANDLESTICK, WEAPON_CANDLESTICK, WEAPON_KNIFE, WEAPON_WRENCH}; int weaponDeckSize = 7; int peopleCards[] = {PEOPLE_MRGREEN, PEOPLE_MSSCARLET, PEOPLE_CONLMUSTARD, PEOPLE_CONLMUSTARD, PEOPLE_PROFPLUM, PEOPLE_MISPEACOCK, PEOPLE_MISWHITE}; int peopleDeckSize = 7; int placeCards[] = {PLACE_KITCHEN, PLACE_HALL, PLACE_POOLROOM, PLACE_STUDY, PLACE_LOUNG, PLACE_LIBRARY, PLACE_CONSERVATORY, PLACE_DINING, PLACE_BILLIARDS}; int placeDeckSize = 9; srand(clock()); // seed rand() using clock() which gives // the current tick your processor is at... int killer[3]; // no need to initialize yet. killer[0-2] will initialize int deckShuffle = rand() % weaponDeckSize; // picks one number out of the deck killer[0] = weaponCards[deckShuffle]; allCards[deckShuffle] = 0; // Card drawn. No longer exists in deck deckShuffle = rand() % peopleDeckSize; // picks another random card out of the deck killer[1] = peopleCards[deckShuffle]; allCards[deckShuffle + weaponDeckSize] = 0; // Card drawn. No longer exists in deck deckShuffle = rand() % placeDeckSize; // randomly picks the last card needed killer[2] = placeCards[deckShuffle]; allCards[deckShuffle + weaponDeckSize + peopleDeckSize] = 0; // Card drawn. No longer exists in deck int numberOfCards = 0; printf("CLUE\n"); printf("written by John Schintone\n"); printf("Origonal game delvoped by Hasbro\n"); int numberOfPlayers = 0; while ((numberOfPlayers < 3) || (numberOfPlayers > 6)) { printf("How many players are Going to play :\n"); printf("[number] > "); scanf("%d",&numberOfPlayers); // A very fast if statement which only uses integers/char's switch(numberOfPlayers) { case 6: { numberOfCards = 3; } break; case 5: { numberOfCards = 4; } break; case 4: { numberOfCards = 5; } break; case 3: { numberOfCards = 6; } break; default: { printf("You must enter a number between 3 and 6...\n"); } // End default } // End switch } // End while int index1, index2; // Note: ++index1; is faster than index1++; and will almost always // produce better code (index1++ happens after this statement line. // ++index1 increments index1 before this statement line) for (index1 = 0; index1 < numberOfPlayers; ++index1) { printf("Player %d", index1); for (index2 = 0; index2 < numberOfCards; ++index2) { // Remember that allCards[deckShuffle] == 0 because we removed that // card ages ago... works out well, just don't forget you did that : ) while (allCards[deckShuffle] == 0) { deckShuffle = rand() % deckSize; } // End while players[index1][index2] = allCards[deckShuffle]; allCards[deckShuffle] = 0; // Card removed for after loop... printf(", %d", players[index1][index2]); switch(players[index1][index2]) { case WEAPON_ROPE: { } break; // Add more... case PEOPLE_MRGREEN: { } break; // Add more... case PLACE_KITCHEN: { } break; // Add more... default: { printf("Program has caught player %d cheating...", index1); } // End default } // End switch } // End for printf("\n"); } // End for printf("The killer is %d, with the %d, and in the %d \n\n", killer[0], killer[1], killer[2]); printf("Type h for this help... \n"); printf("Type e to escape... \n"); printf("Type r to roll the die... \n"); char command = '\0'; // \0 represents zero, or the null character while (command != 'e') { printf("[one character] > "); scanf("%c", &command); if (command == 'r') { die = rand() % 6 + 1; printf("Your number is: %d \n", die); } // end while if (command == 'h') { printf("Type h for this help... \n"); printf("Type e to escape... \n"); printf("Type r to roll the die... \n"); } // End if printf("\n"); } // End while return(0); // Success. Program worked ok } // End main() Function

    Read the article

  • Chart Filtering

    - by Tim Dexter
    Interesting question from a colleague this week. Can you add a filter to a chart to just show a specific set of data? In an RTF template, you need to do a little finagling in the chart definition. In an online template, a couple of clicks and you're done. RTF Build your chart as you would normally to include all the data to start with. Now flip to the Advanced tab to see the code behind the chart. Its not very pretty but with a little effort you can get it looking a little more friendly. Here's my chart showing employees and their salaries. <Graph depthAngle="50" depthRadius="8" seriesEffect="SE_AUTO_GRADIENT"> <LegendArea visible="true"/>  <Title text="Executive Department Only" visible="true" horizontalAlignment="CENTER"/>  <LocalGridData colCount="{count(.//G_2)}" rowCount="1">   <RowLabels>    <Label>SALARY</Label>   </RowLabels>   <ColLabels>    <xsl:for-each select=".//G_2">     <Label><xsl:value-of select="EMP_NAME"/></Label>    </xsl:for-each>   </ColLabels>   <DataValues>    <RowData>     <xsl:for-each select=".//G_2">      <Cell><xsl:value-of select="SALARY"/></Cell>     </xsl:for-each>    </RowData>   </DataValues>  </LocalGridData> </Graph> Note the emboldened text. Its currently grabbing all values in the G_2 level of the data. We can use an XPATH expression to filter the data to the set we want to see. In my case I want to only see the employees that are in the Executive department. My  data is structured thus:   <DATA_DS>     <G_1>         <DEPARTMENT_NAME>Accounting</DEPARTMENT_NAME>         <G_2>             <MANAGER>Higgins</MANAGER>             <EMPLOYEE_ID>206</EMPLOYEE_ID>             <HIRE_DATE>2002-06-07T00:00:00.000-04:00</HIRE_DATE>             <SALARY>8300</SALARY>             <JOB_TITLE>Public Accountant</JOB_TITLE>             <PARAS>11000</PARAS>             <EMP_NAME>William Gietz</EMP_NAME>         </G_2> So the XPATH expression Im going to use to limit the data to the Executive department would be .//G_2[../DEPARTMENT_NAME='Executive'] Note the ../ moves the parser up the XML tree to be able to test the DEPARTMENT_NAME value. I added this XPATH expression to the three instances that need it ColCount, ColLabels and RowData. Its simple enough to do. Testing your XPATH expression is easier to do using a table of data. Please note, as soon as you make changes to the chart code. Going back to the Builder tab, you'll find that everything is grayed out. I recommend you make all the changes you can via the chart dialog before updating the code. Online Template Implementing the filter is much simpler, there is a dialog box to help you out. Add you chart and fill out the various data points you want to show. then hit the Filter item in the ribbon above the chart. That will pop the filter dialog box where you can then add a filter to the chart.   You can add multiple filters if needed and of course you can use the Manage Filters button to re-open and edit the filters. Pretty straightforward stuff!

    Read the article

  • Restructuring a large Chrome Extension/WebApp

    - by A.M.K
    I have a very complex Chrome Extension that has gotten too large to maintain in its current format. I'd like to restructure it, but I'm 15 and this is the first webapp or extension of it's type I've built so I have no idea how to do it. TL;DR: I have a large/complex webapp I'd like to restructure and I don't know how to do it. Should I follow my current restructure plan (below)? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? While it isn't relevant to the question, the actual code is on Github and the extension is on the webstore. The basic structure is as follows: index.html <html> <head> <link href="css/style.css" rel="stylesheet" /> <!-- This holds the main app styles --> <link href="css/widgets.css" rel="stylesheet" /> <!-- And this one holds widget styles --> </head> <body class="unloaded"> <!-- Low-level base elements are "hardcoded" here, the unloaded class is used for transitions and is removed on load. i.e: --> <div class="tab-container" tabindex="-1"> <!-- Tab nav --> </div> <!-- Templates for all parts of the application and widgets are stored as elements here. I plan on changing these to <script> elements during the restructure since <template>'s need valid HTML. --> <template id="template.toolbar"> <!-- Template content --> </template> <!-- Templates end --> <!-- Plugins --> <script type="text/javascript" src="js/plugins.js"></script> <!-- This contains the code for all widgets, I plan on moving this online and downloading as necessary soon. --> <script type="text/javascript" src="js/widgets.js"></script> <!-- This contains the main application JS. --> <script type="text/javascript" src="js/script.js"></script> </body> </html> widgets.js (initLog || (window.initLog = [])).push([new Date().getTime(), "A log is kept during page load so performance can be analyzed and errors pinpointed"]); // Widgets are stored in an object and extended (with jQuery, but I'll probably switch to underscore if using Backbone) as necessary var Widgets = { 1: { // Widget ID, this is set here so widgets can be retreived by ID id: 1, // Widget ID again, this is used after the widget object is duplicated and detached size: 3, // Default size, medium in this case order: 1, // Order shown in "store" name: "Weather", // Widget name interval: 300000, // Refresh interval nicename: "weather", // HTML and JS safe widget name sizes: ["tiny", "small", "medium"], // Available widget sizes desc: "Short widget description", settings: [ { // Widget setting specifications stored as an array of objects. These are used to dynamically generate widget setting popups. type: "list", nicename: "location", label: "Location(s)", placeholder: "Enter a location and press Enter" } ], config: { // Widget settings as stored in the tabs object (see script.js for storage information) size: "medium", location: ["San Francisco, CA"] }, data: {}, // Cached widget data stored locally, this lets it work offline customFunc: function(cb) {}, // Widgets can optionally define custom functions in any part of their object refresh: function() {}, // This fetches data from the web and caches it locally in data, then calls render. It gets called after the page is loaded for faster loads render: function() {} // This renders the widget only using information from data, it's called on page load. } }; script.js (initLog || (window.initLog = [])).push([new Date().getTime(), "These are also at the end of every file"]); // Plugins, extends and globals go here. i.e. Number.prototype.pad = .... var iChrome = function(refresh) { // The main iChrome init, called with refresh when refreshing to not re-run libs iChrome.Status.log("Starting page generation"); // From now on iChrome.Status.log is defined, it's used in place of the initLog iChrome.CSS(); // Dynamically generate CSS based on settings iChrome.Tabs(); // This takes the tabs stored in the storage (see fetching below) and renders all columns and widgets as necessary iChrome.Status.log("Tabs rendered"); // These will be omitted further along in this excerpt, but they're used everywhere // Checks for justInstalled => show getting started are run here /* The main init runs the bare minimum required to display the page, this sets all non-visible or instantly need things (such as widget dragging) on a timeout */ iChrome.deferredTimeout = setTimeout(function() { iChrome.deferred(refresh); // Pass refresh along, see above }, 200); }; iChrome.deferred = function(refresh) {}; // This calls modules one after the next in the appropriate order to finish rendering the page iChrome.Search = function() {}; // Modules have a base init function and are camel-cased and capitalized iChrome.Search.submit = function(val) {}; // Methods within modules are camel-cased and not capitalized /* Extension storage is async and fetched at the beginning of plugins.js, it's then stored in a variable that iChrome.Storage processes. The fetcher checks to see if processStorage is defined, if it is it gets called, otherwise settings are left in iChromeConfig */ var processStorage = function() { iChrome.Storage(function() { iChrome.Templates(); // Templates are read from their elements and held in a cache iChrome(); // Init is called }); }; if (typeof iChromeConfig == "object") { processStorage(); } Objectives of the restructure Memory usage: Chrome apparently has a memory leak in extensions, they're trying to fix it but memory still keeps on getting increased every time the page is loaded. The app also uses a lot on its own. Code readability: At this point I can't follow what's being called in the code. While rewriting the code I plan on properly commenting everything. Module interdependence: Right now modules call each other a lot, AFAIK that's not good at all since any change you make to one module could affect countless others. Fault tolerance: There's very little fault tolerance or error handling right now. If a widget is causing the rest of the page to stop rendering the user should at least be able to remove it. Speed is currently not an issue and I'd like to keep it that way. How I think I should do it The restructure should be done using Backbone.js and events that call modules (i.e. on storage.loaded = init). Modules should each go in their own file, I'm thinking there should be a set of core files that all modules can rely on and call directly and everything else should be event based. Widget structure should be kept largely the same, but maybe they should also be split into their own files. AFAIK you can't load all templates in a folder, therefore they need to stay inline. Grunt should be used to merge all modules, plugins and widgets into one file. Templates should also all be precompiled. Question: Should I follow my current restructure plan? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? Do applications written with Backbone tend to be more intensive (memory and speed) than ones written in Vanilla JS? Also, can I expect to improve this with a proper restructure or is my current code about as good as can be expected?

    Read the article

  • How to support 3-byte UTF-8 Characters in ANT

    - by efelton
    I am trying to support UTF-8 characters in my ANT script. As long as the character string are made up of 2-byte UTF-8 characters, such as: Lògìñ Ùsèr ÌÐ Then things work fine. When I use Unicode Han Character: ? Which, according to this site: http://www.fileformat.info/info/unicode/char/6211/index.htm Has a UTF-8 encoding of 0xE6 0x88 0x91 I can see in UltraEdit, my input properties file has the values "E6 88 91" all in a row, so I'm fairly confident that my input is correct. And When I open the same file in Notepad++ I can see all the characters correctly. Here is my Build Script: <?xml version="1.0" encoding="UTF-8" ?> <project name="utf8test" default="all" basedir="."> <target name="all"> <loadproperties encoding="UTF-8" srcfile="./apps.properties.all.txt" /> <echo>No encoding ${common.app.name}</echo> <echo encoding="UTF-8">UTF-8 ${common.app.name}</echo> <echo encoding="UnicodeLittle">UnicodeLittle ${common.app.name}</echo> <echo encoding="UnicodeLittleUnmarked">UnicodeLittleUnmarked ${common.app.name}</echo> <echo>${common.app.ServerName}</echo> <echo>${bb.vendor}</echo> <echo>No encoding ${common.app.UserIdText}</echo> <echo encoding="UTF-8">UTF-8 ${common.app.UserIdText}</echo> <echo encoding="UnicodeLittle">UnicodeLittle ${common.app.UserIdText}</echo> <echo encoding="UnicodeLittleUnmarked">UnicodeLittleUnmarked ${common.app.UserIdText}</echo> <echoproperties /> </target> </project> And here is my properties file: common.app=VrvPsLTst common.app.name=?? common.app.description=Pseudo Loc Test App for Build Script testing common.app.ServerName=http://Vèrìvò.com bb.vendor=Vèrìvò common.app.PasswordText=Pàsswòrð bb.override.list=MP_COPYRIGHTTEXT, "Çòpÿrìght 2012 Vèrívó Bùîlð TéàM" common.app.LoginButtonText=Lògìñ common.app.UserIdText=Ùsèr ÌÐ bb.SMSSuccess=Mèssàgéß Sùççêssfúllÿ Sëñt common.app.LoginScreenMessage=WèlçòMé Mêssàgë common.app.LoginProgressMessage=Àùthèñtìçàtíòñ îñ prógréss... ios.RegistrationText=Règìstràtíòñ Téxt ios.RegistrationURL=http://www.josscrowcroft.com/2011/code/utf-8-multibyte-characters-in-url-parameters-%E2%9C%93/ Here is what the output looks like: Buildfile: C:\Temp\utf8\build.xml all: [echo] No encoding ?? [echo] UTF-8 ?? [echo] ÿþU n i c o d e L i t t l e ? ? [echo] U n i c o d e L i t t l e U n m a r k e d ? ? [echo] http://Vèrìvò.com [echo] Vèrìvò [echo] No encoding Ùsèr ÌÐ [echo] UTF-8 Ùsèr ÃŒÃ? [echo] ÿþU n i c o d e L i t t l e Ù s è r Ì Ð [echo] U n i c o d e L i t t l e U n m a r k e d Ù s è r Ì Ð [echoproperties] #Ant properties [echoproperties] #Mon Jun 18 15:25:13 EDT 2012 [echoproperties] ant.core.lib=C\:\\ant\\lib\\ant.jar [echoproperties] ant.file=C\:\\Temp\\utf8\\build.xml [echoproperties] ant.file.type=file [echoproperties] ant.file.type.utf8test=file [echoproperties] ant.file.utf8test=C\:\\Temp\\utf8\\build.xml [echoproperties] ant.home=c\:\\ant\\bin\\.. [echoproperties] ant.java.version=1.6 [echoproperties] ant.library.dir=C\:\\ant\\lib [echoproperties] ant.project.default-target=all [echoproperties] ant.project.invoked-targets=all [echoproperties] ant.project.name=utf8test [echoproperties] ant.version=Apache Ant version 1.8.1 compiled on April 30 2010 [echoproperties] awt.toolkit=sun.awt.windows.WToolkit [echoproperties] basedir=C\:\\Temp\\utf8 [echoproperties] bb.SMSSuccess=M\u00E8ss\u00E0g\u00E9\u00DF S\u00F9\u00E7\u00E7\u00EAssf\u00FAll\u00FF S\u00EB\u00F1t [echoproperties] bb.override.list=MP_COPYRIGHTTEXT, "\u00C7\u00F2p\u00FFr\u00ECght 2012 V\u00E8r\u00EDv\u00F3 B\u00F9\u00EEl\u00F0 T\u00E9\u00E0?" [echoproperties] bb.vendor=V\u00E8r\u00ECv\u00F2 [echoproperties] common.app=VrvPsLTst [echoproperties] common.app.LoginButtonText=L\u00F2g\u00EC\u00F1 [echoproperties] common.app.LoginProgressMessage=\u00C0\u00F9th\u00E8\u00F1t\u00EC\u00E7\u00E0t\u00ED\u00F2\u00F1 \u00EE\u00F1 pr\u00F3gr\u00E9ss... [echoproperties] common.app.LoginScreenMessage=W\u00E8l\u00E7\u00F2?\u00E9 M\u00EAss\u00E0g\u00EB [echoproperties] common.app.PasswordText=P\u00E0ssw\u00F2r\u00F0 [echoproperties] common.app.ServerName=http\://V\u00E8r\u00ECv\u00F2.com [echoproperties] common.app.UserIdText=\u00D9s\u00E8r \u00CC\u00D0 [echoproperties] common.app.description=Pseudo Loc Test App for Build Script testing [echoproperties] common.app.name=?? [echoproperties] file.encoding=Cp1252 [echoproperties] file.encoding.pkg=sun.io [echoproperties] file.separator=\\ [echoproperties] ios.RegistrationText=R\u00E8g\u00ECstr\u00E0t\u00ED\u00F2\u00F1 T\u00E9xt [echoproperties] ios.RegistrationURL=http\://www.josscrowcroft.com/2011/code/utf-8-multibyte-characters-in-url-parameters-%E2%9C%93/ [echoproperties] java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment [echoproperties] java.awt.printerjob=sun.awt.windows.WPrinterJob [echoproperties] java.class.path=c\:\\ant\\bin\\..\\lib\\ant-launcher.jar;C\:\\Temp\\utf8\\.\\;C\:\\Program Files (x86)\\Java\\jre7\\lib\\ext\\QTJava.zip;C\:\\ant\\lib\\ant-antlr.jar;C\:\\ant\\lib\\ant-apache-bcel.jar;C\:\\ant\\lib\\ant-apache-bsf.jar;C\:\\ant\\lib\\ant-apache-log4j.jar;C\:\\ant\\lib\\ant-apache-oro.jar;C\:\\ant\\lib\\ant-apache-regexp.jar;C\:\\ant\\lib\\ant-apache-resolver.jar;C\:\\ant\\lib\\ant-apache-xalan2.jar;C\:\\ant\\lib\\ant-commons-logging.jar;C\:\\ant\\lib\\ant-commons-net.jar;C\:\\ant\\lib\\ant-contrib-1.0b3.jar;C\:\\ant\\lib\\ant-jai.jar;C\:\\ant\\lib\\ant-javamail.jar;C\:\\ant\\lib\\ant-jdepend.jar;C\:\\ant\\lib\\ant-jmf.jar;C\:\\ant\\lib\\ant-jsch.jar;C\:\\ant\\lib\\ant-junit.jar;C\:\\ant\\lib\\ant-launcher.jar;C\:\\ant\\lib\\ant-netrexx.jar;C\:\\ant\\lib\\ant-nodeps.jar;C\:\\ant\\lib\\ant-starteam.jar;C\:\\ant\\lib\\ant-stylebook.jar;C\:\\ant\\lib\\ant-swing.jar;C\:\\ant\\lib\\ant-testutil.jar;C\:\\ant\\lib\\ant-trax.jar;C\:\\ant\\lib\\ant-weblogic.jar;C\:\\ant\\lib\\ant.jar;C\:\\ant\\lib\\bb-ant-tools.jar;C\:\\ant\\lib\\xercesImpl.jar;C\:\\ant\\lib\\xml-apis.jar;C\:\\Program Files\\Java\\jre7\\lib\\tools.jar [echoproperties] java.class.version=51.0 [echoproperties] java.endorsed.dirs=C\:\\Program Files\\Java\\jre7\\lib\\endorsed [echoproperties] java.ext.dirs=C\:\\Program Files\\Java\\jre7\\lib\\ext;C\:\\Windows\\Sun\\Java\\lib\\ext [echoproperties] java.home=C\:\\Program Files\\Java\\jre7 [echoproperties] java.io.tmpdir=C\:\\Users\\efelton\\AppData\\Local\\Temp\\ [echoproperties] java.library.path=C\:\\Windows\\SYSTEM32;C\:\\Windows\\Sun\\Java\\bin;C\:\\Windows\\system32;C\:\\Windows;C\:\\Windows\\SYSTEM32;C\:\\Windows;C\:\\Windows\\SYSTEM32\\WBEM;C\:\\Windows\\SYSTEM32\\WINDOWSPOWERSHELL\\V1.0\\;C\:\\PROGRAM FILES\\INTEL\\WIFI\\BIN\\;C\:\\PROGRAM FILES\\COMMON FILES\\INTEL\\WIRELESSCOMMON\\;C\:\\PROGRAM FILES (X86)\\MICROSOFT SQL SERVER\\100\\TOOLS\\BINN\\;C\:\\PROGRAM FILES\\MICROSOFT SQL SERVER\\100\\TOOLS\\BINN\\;C\:\\PROGRAM FILES\\MICROSOFT SQL SERVER\\100\\DTS\\BINN\\;C\:\\PROGRAM FILES (X86)\\MICROSOFT SQL SERVER\\100\\TOOLS\\BINN\\VSSHELL\\COMMON7\\IDE\\;C\:\\PROGRAM FILES (X86)\\MICROSOFT SQL SERVER\\100\\DTS\\BINN\\;C\:\\Program Files\\ThinkPad\\Bluetooth Software\\;C\:\\Program Files\\ThinkPad\\Bluetooth Software\\syswow64;C\:\\Program Files (x86)\\QuickTime\\QTSystem\\;C\:\\Program Files (x86)\\AccuRev\\bin;C\:\\Program Files\\Java\\jdk1.7.0_04\\bin;C\:\\Program Files (x86)\\IDM Computer Solutions\\UltraEdit\\;. [echoproperties] java.runtime.name=Java(TM) SE Runtime Environment [echoproperties] java.runtime.version=1.7.0_04-b22 [echoproperties] java.specification.name=Java Platform API Specification [echoproperties] java.specification.vendor=Oracle Corporation [echoproperties] java.specification.version=1.7 [echoproperties] java.vendor=Oracle Corporation [echoproperties] java.vendor.url=http\://java.oracle.com/ [echoproperties] java.vendor.url.bug=http\://bugreport.sun.com/bugreport/ [echoproperties] java.version=1.7.0_04 [echoproperties] java.vm.info=mixed mode [echoproperties] java.vm.name=Java HotSpot(TM) 64-Bit Server VM [echoproperties] java.vm.specification.name=Java Virtual Machine Specification [echoproperties] java.vm.specification.vendor=Oracle Corporation [echoproperties] java.vm.specification.version=1.7 [echoproperties] java.vm.vendor=Oracle Corporation [echoproperties] java.vm.version=23.0-b21 [echoproperties] line.separator=\r\n [echoproperties] os.arch=amd64 [echoproperties] os.name=Windows 7 [echoproperties] os.version=6.1 [echoproperties] path.separator=; [echoproperties] sun.arch.data.model=64 [echoproperties] sun.boot.class.path=C\:\\Program Files\\Java\\jre7\\lib\\resources.jar;C\:\\Program Files\\Java\\jre7\\lib\\rt.jar;C\:\\Program Files\\Java\\jre7\\lib\\sunrsasign.jar;C\:\\Program Files\\Java\\jre7\\lib\\jsse.jar;C\:\\Program Files\\Java\\jre7\\lib\\jce.jar;C\:\\Program Files\\Java\\jre7\\lib\\charsets.jar;C\:\\Program Files\\Java\\jre7\\lib\\jfr.jar;C\:\\Program Files\\Java\\jre7\\classes [echoproperties] sun.boot.library.path=C\:\\Program Files\\Java\\jre7\\bin [echoproperties] sun.cpu.endian=little [echoproperties] sun.cpu.isalist=amd64 [echoproperties] sun.desktop=windows [echoproperties] sun.io.unicode.encoding=UnicodeLittle [echoproperties] sun.java.command=org.apache.tools.ant.launch.Launcher -cp .;C\:\\Program Files (x86)\\Java\\jre7\\lib\\ext\\QTJava.zip [echoproperties] sun.java.launcher=SUN_STANDARD [echoproperties] sun.jnu.encoding=Cp1252 [echoproperties] sun.management.compiler=HotSpot 64-Bit Tiered Compilers [echoproperties] sun.os.patch.level=Service Pack 1 [echoproperties] user.country=US [echoproperties] user.dir=C\:\\Temp\\utf8 [echoproperties] user.home=C\:\\Users\\efelton [echoproperties] user.language=en [echoproperties] user.name=efelton [echoproperties] user.script= [echoproperties] user.timezone= [echoproperties] user.variant= BUILD SUCCESSFUL Total time: 1 second Thank you for your help EDIT\UPDATE 6/19/2012 I am developing in a Windows environment. I have installed a TTF from: http://freedesktop.org/wiki/Software/CJKUnifonts/Download I have updated UltraEdit to use the TTF and I can see the Chinese characters. <?xml version="1.0" encoding="UTF-8" ?> <project name="utf8test" default="all" basedir="."> <target name="all"> <echo>??</echo> <echo encoding="ISO-8859-1">ISO-8859-1 ??</echo> <echo encoding="UTF-8">UTF-8 ??</echo> <echo file="echo_output.txt" append="true" >?? ${line.separator}</echo> <echo file="echo_output.txt" append="true" encoding="ISO-8859-1">ISO-8859-1 ?? ${line.separator}</echo> <echo file="echo_output.txt" append="true" encoding="UTF-8">UTF-8 ?? ${line.separator}</echo> <echo file="echo_output.txt" append="true" encoding="UnicodeLittle">UnicodeLittle ?? ${line.separator}</echo> <echo file="echo_output.txt" append="true" encoding="UnicodeLittleUnmarked">UnicodeLittleUnmarked ?? ${line.separator}</echo> </target> </project> The output captured by running inside UltraEdit is: Buildfile: E:\temp\utf8\build.xml all: [echo] ?? [echo] ISO-8859-1 ?? [echo] UTF-8 ?? BUILD SUCCESSFUL Total time: 1 second And the echo_output.txt file shows up like this: ?? ISO-8859-1 ?? UTF-8 ?? ÿþU n i c o d e L i t t l e ? ? U n i c o d e L i t t l e U n m a r k e d ? ? So there appears to be somehting fundamentally wrong with how my ANT environment is set up since I cannot simply echo the character to the screen or to a file.

    Read the article

  • Parsing concatenated, non-delimited XML messages from TCP-stream using C#

    - by thaller
    I am trying to parse XML messages which are send to my C# application over TCP. Unfortunately, the protocol can not be changed and the XML messages are not delimited and no length prefix is used. Moreover the character encoding is not fixed but each message starts with an XML declaration <?xml>. The question is, how can i read one XML message at a time, using C#. Up to now, I tried to read the data from the TCP stream into a byte array and use it through a MemoryStream. The problem is, the buffer might contain more than one XML messages or the first message may be incomplete. In these cases, I get an exception when trying to parse it with XmlReader.Read or XmlDocument.Load, but unfortunately the XmlException does not really allow me to distinguish the problem (except parsing the localized error string). I tried using XmlReader.Read and count the number of Element and EndElement nodes. That way I know when I am finished reading the first, entire XML message. However, there are several problems. If the buffer does not yet contain the entire message, how can I distinguish the XmlException from an actually invalid, non-well-formed message? In other words, if an exception is thrown before reading the first root EndElement, how can I decide whether to abort the connection with error, or to collect more bytes from the TCP stream? If no exception occurs, the XmlReader is positioned at the start of the root EndElement. Casting the XmlReader to IXmlLineInfo gives me the current LineNumber and LinePosition, however it is not straight forward to get the byte position where the EndElement really ends. In order to do that, I would have to convert the byte array into a string (with the encoding specified in the XML declaration), seek to LineNumber,LinePosition and convert that back to the byte offset. I try to do that with StreamReader.ReadLine, but the stream reader gives no public access to the current byte position. All this seams very inelegant and non robust. I wonder if you have ideas for a better solution. Thank you. EDIT: I looked around and think that the situation is as follows (I might be wrong, corrections are welcome): I found no method so that the XmlReader can continue parsing a second XML message (at least not, if the second message has an XmlDeclaration). XmlTextReader.ResetState could do something similar, but for that I would have to assume the same encoding for all messages. Therefor I could not connect the XmlReader directly to the TcpStream. After closing the XmlReader, the buffer is not positioned at the readers last position. So it is not possible to close the reader and use a new one to continue with the next message. I guess the reason for this is, that the reader could not successfully seek on every possible input stream. When XmlReader throws an exception it can not be determined whether it happened because of an premature EOF or because of a non-wellformed XML. XmlReader.EOF is not set in case of an exception. As workaround I derived my own MemoryBuffer, which returns the very last byte as a single byte. This way I know that the XmlReader was really interested in the last byte and the following exception is likely due to a truncated message (this is kinda sloppy, in that it might not detect every non-wellformed message. However, after appending more bytes to the buffer, sooner or later the error will be detected. I could cast my XmlReader to the IXmlLineInfo interface, which gives access to the LineNumber and the LinePosition of the current node. So after reading the first message I remember these positions and use it to truncate the buffer. Here comes the really sloppy part, because I have to use the character encoding to get the byte position. I am sure you could find test cases for the code below where it breaks (e.g. internal elements with mixed encoding). But up to now it worked for all my tests. The parser class follows here -- may it be useful (I know, its very far from perfect...) class XmlParser { private byte[] buffer = new byte[0]; public int Length { get { return buffer.Length; } } // Append new binary data to the internal data buffer... public XmlParser Append(byte[] buffer2) { if (buffer2 != null && buffer2.Length > 0) { // I know, its not an efficient way to do this. // The EofMemoryStream should handle a List<byte[]> ... byte[] new_buffer = new byte[buffer.Length + buffer2.Length]; buffer.CopyTo(new_buffer, 0); buffer2.CopyTo(new_buffer, buffer.Length); buffer = new_buffer; } return this; } // MemoryStream which returns the last byte of the buffer individually, // so that we know that the buffering XmlReader really locked at the last // byte of the stream. // Moreover there is an EOF marker. private class EofMemoryStream: Stream { public bool EOF { get; private set; } private MemoryStream mem_; public override bool CanSeek { get { return false; } } public override bool CanWrite { get { return false; } } public override bool CanRead { get { return true; } } public override long Length { get { return mem_.Length; } } public override long Position { get { return mem_.Position; } set { throw new NotSupportedException(); } } public override void Flush() { mem_.Flush(); } public override long Seek(long offset, SeekOrigin origin) { throw new NotSupportedException(); } public override void SetLength(long value) { throw new NotSupportedException(); } public override void Write(byte[] buffer, int offset, int count) { throw new NotSupportedException(); } public override int Read(byte[] buffer, int offset, int count) { count = Math.Min(count, Math.Max(1, (int)(Length - Position - 1))); int nread = mem_.Read(buffer, offset, count); if (nread == 0) { EOF = true; } return nread; } public EofMemoryStream(byte[] buffer) { mem_ = new MemoryStream(buffer, false); EOF = false; } protected override void Dispose(bool disposing) { mem_.Dispose(); } } // Parses the first xml message from the stream. // If the first message is not yet complete, it returns null. // If the buffer contains non-wellformed xml, it ~should~ throw an exception. // After reading an xml message, it pops the data from the byte array. public Message deserialize() { if (buffer.Length == 0) { return null; } Message message = null; Encoding encoding = Message.default_encoding; //string xml = encoding.GetString(buffer); using (EofMemoryStream sbuffer = new EofMemoryStream (buffer)) { XmlDocument xmlDocument = null; XmlReaderSettings settings = new XmlReaderSettings(); int LineNumber = -1; int LinePosition = -1; bool truncate_buffer = false; using (XmlReader xmlReader = XmlReader.Create(sbuffer, settings)) { try { // Read to the first node (skipping over some element-types. // Don't use MoveToContent here, because it would skip the // XmlDeclaration too... while (xmlReader.Read() && (xmlReader.NodeType==XmlNodeType.Whitespace || xmlReader.NodeType==XmlNodeType.Comment)) { }; // Check for XML declaration. // If the message has an XmlDeclaration, extract the encoding. switch (xmlReader.NodeType) { case XmlNodeType.XmlDeclaration: while (xmlReader.MoveToNextAttribute()) { if (xmlReader.Name == "encoding") { encoding = Encoding.GetEncoding(xmlReader.Value); } } xmlReader.MoveToContent(); xmlReader.Read(); break; } // Move to the first element. xmlReader.MoveToContent(); // Read the entire document. xmlDocument = new XmlDocument(); xmlDocument.Load(xmlReader.ReadSubtree()); } catch (XmlException e) { // The parsing of the xml failed. If the XmlReader did // not yet look at the last byte, it is assumed that the // XML is invalid and the exception is re-thrown. if (sbuffer.EOF) { return null; } throw e; } { // Try to serialize an internal data structure using XmlSerializer. Type type = null; try { type = Type.GetType("my.namespace." + xmlDocument.DocumentElement.Name); } catch (Exception e) { // No specialized data container for this class found... } if (type == null) { message = new Message(); } else { // TODO: reuse the serializer... System.Xml.Serialization.XmlSerializer ser = new System.Xml.Serialization.XmlSerializer(type); message = (Message)ser.Deserialize(new XmlNodeReader(xmlDocument)); } message.doc = xmlDocument; } // At this point, the first XML message was sucessfully parsed. // Remember the lineposition of the current end element. IXmlLineInfo xmlLineInfo = xmlReader as IXmlLineInfo; if (xmlLineInfo != null && xmlLineInfo.HasLineInfo()) { LineNumber = xmlLineInfo.LineNumber; LinePosition = xmlLineInfo.LinePosition; } // Try to read the rest of the buffer. // If an exception is thrown, another xml message appears. // This way the xml parser could tell us that the message is finished here. // This would be prefered as truncating the buffer using the line info is sloppy. try { while (xmlReader.Read()) { } } catch { // There comes a second message. Needs workaround for trunkating. truncate_buffer = true; } } if (truncate_buffer) { if (LineNumber < 0) { throw new Exception("LineNumber not given. Cannot truncate xml buffer"); } // Convert the buffer to a string using the encoding found before // (or the default encoding). string s = encoding.GetString(buffer); // Seek to the line. int char_index = 0; while (--LineNumber > 0) { // Recognize \r , \n , \r\n as newlines... char_index = s.IndexOfAny(new char[] {'\r', '\n'}, char_index); // char_index should not be -1 because LineNumber>0, otherwise an RangeException is // thrown, which is appropriate. char_index++; if (s[char_index-1]=='\r' && s.Length>char_index && s[char_index]=='\n') { char_index++; } } char_index += LinePosition - 1; var rgx = new System.Text.RegularExpressions.Regex(xmlDocument.DocumentElement.Name + "[ \r\n\t]*\\>"); System.Text.RegularExpressions.Match match = rgx.Match(s, char_index); if (!match.Success || match.Index != char_index) { throw new Exception("could not find EndElement to truncate the xml buffer."); } char_index += match.Value.Length; // Convert the character offset back to the byte offset (for the given encoding). int line1_boffset = encoding.GetByteCount(s.Substring(0, char_index)); // remove the bytes from the buffer. buffer = buffer.Skip(line1_boffset).ToArray(); } else { buffer = new byte[0]; } } return message; } }

    Read the article

  • Prevent RDP logon brute force in mikrotik router via winbox

    - by holian
    Masters, I need help, how to config our router to block RDP brute force attacks I would like to set our router to only allow RDP connection from a specified country (our specified IP ranges), plus i need to set up router to block (take ips to black list) and drop brute force attepmst to specified port numbers. I try to set this with changeing the ftp port to rdp port. http://wiki.mikrotik.com/wiki/Bruteforce_login_prevention_%28FTP_%26_SSH Any suggestion tnx. H Current configuration: I try to configure the router via Winbox. I set some NAT rules (from dyndns to local address, rdp port) In the filter rules tab: I'm not sure this configuration should do the trick?! Is the content text "530 login incorrect" is fit for RDP connection to? Because in the tutorial used for filtering FTP connection. How to set router to allow RDP attempts from specified IP ranges? Thank you // New config

    Read the article

  • iPad connections to Cisco VPN error -- "Enter your user authentication"

    - by rhart
    Is anyone else having problems with the iPad IPSec (Cisco) VPN configuration? I've configured a Cisco VPN connection to a PIX 501 firewall on a 32GB Wifi Apple iPad. This is done in Settings - General - Network - VPN - Add VPN Configuration - IPSec tab. When everything is set up properly and I attempt to connect I just get a popup that says "Enter your user authentication" with no fields to enter either piece of info, and just OK and Cancel buttons. I've read about similar problems with the VPN client built into Mac OS X and the iPhone 3GS but never with the iPad. Does anybody know a solution? I'm not afraid to change the configuration of my PIX 501 if that's necessary.

    Read the article

  • Spikes of 99% disk activity in Windows 8 Task Manager

    - by Jonathan Chan
    For some reason Windows 8's Task Manager reports spikes of 99% disk activity for hours at a time. Looking at the entries in that column, however, data doesn't seem to be getting written any more quickly than when the disk activity is around 25-50% (which it seem to idle at most of the time). Furthermore, when these 99% disk activity spikes are happening, the average response time reported in the Performance tab becomes 4000-6000ms. Is there a good way to find out what is causing the disk activity? I've tried using Process Explorer, but I said above, the rate at which data is reportedly being written doesn't seem to correspond (Dropbox and Google Chrome are constantly the top two, but the spikes are not dependent on their being open). Thanks in advance for any help. It gets very annoying when the computer stutters to a halt.

    Read the article

  • Delphi Speech recognition delphi

    - by XBasic3000
    I need create a programatic equivalent using delphi language... or could someone post a link on how to do grammars in peech recogniton using the delphi. sorry for my english... XML Grammar Sample(s): <GRAMMAR> <!-- Create a simple "hello world" rule --> <RULE NAME="HelloWorld" TOPLEVEL="ACTIVE"> <P>hello world</P> </RULE> <!-- Create a more advanced "hello world" rule that changes the display form. When the user says "hello world" the display text will be "Hiya there!" --> <RULE NAME="HelloWorld_Disp" TOPLEVEL="ACTIVE"> <P DISP="Hiya there!">hello world</P> </RULE> <!-- Create a rule that changes the pronunciation and the display form of the phrase. When the user says "eh" the display text will be "I don't understand?". Note the user didn't say "huh". The pronunciation for "what" is specific to this phrase tag and is not changed for the user or application lexicon, or even other instances of "what" in the grammar --> <RULE NAME="Question_Pron" TOPLEVEL="ACTIVE"> <P DISP="I don't understand" PRON="eh">what</P> </RULE> <!-- Create a rule demonstrating repetition --> <!-- the rule will only be recognized if the user says "hey diddle diddle" --> <RULE NAME="NurseryRhyme" TOPLEVEL="ACTIVE"> <P>hey</P> <P MIN="2" MAX="2">diddle</P> </RULE> <!-- Create a list with variable phrase weights --> <!-- If the user says similar phrases, the recognizer will use the weights to pick a match --> <RULE NAME="UseWeights" TOPLEVEL="ACTIVE"> <LIST> <!-- Note the higher likelihood that the user is expected to say "recognizer speech" --> <P WEIGHT=".95">recognize speech</P> <P WEIGHT=".05">wreck a nice beach</P> </LIST> </RULE> <!-- Create a phrase with an attached semantic property --> <!-- Speaking "one two three" will return three different unique semantic properties, with different names, and different values --> <RULE NAME="UseProps" TOPLEVEL="ACTIVE"> <!-- named property, without value --> <P PROPNAME="NOVALUE">one</P> <!-- named property, with numeric value --> <P PROPNAME="NUMBER" VAL="2">two</P> <!-- named property, with string value --> <P PROPNAME="STRING" VALSTR="three">three</P> </RULE> </GRAMMAR> **Programmatic Equivalent:** To add a phrase to a rule, SAPI provides an API called ISpGrammarBuilder::AddWordTransition. The application developer can add the sentences as follows: SPSTATEHANDLE hsHelloWorld; // Create new top-level rule called "HelloWorld" hr = cpRecoGrammar->GetRule(L"HelloWorld", NULL, SPRAF_TopLevel | SPRAF_Active, TRUE, &hsHelloWorld); // Check hr // Add the command words "hello world" // Note that the lexical delimiter is " ", a space character. // By using a space delimiter, the entire phrase can be added // in one method call hr = cpRecoGrammar->AddWordTransition(hsHelloWorld, NULL, L"hello world", L" ", SPWT_LEXICAL, NULL, NULL); // Check hr // Add the command words "hiya there" // Note that the lexical delimiter is "|", a pipe character. // By using a pipe delimiter, the entire phrase can be added // in one method call hr = cpRecoGrammar->AddWordTransition(hsHelloWorld, NULL, L"hiya|there", L"|", SPWT_LEXICAL, NULL, NULL); // Check hr // save/commit changes hr = cpRecoGrammar->Commit(NULL); // Check hr

    Read the article

  • Trouble upgrading OSX, because HD doesn't use GUID Partition Table Scheme

    - by Erik Vold
    So I have a intel-based macbook with osx 10.5 and I'm trying to upgrade to 10.6, but when I run the upgrade 'install' I quickly get to a page where I am supposed to 'Select the disk where you want to install Mac OS X' and there is only the one hard drive, so it is auto selected, and below that I see a warning message and the only button available is the 'Go Back' button. The warning message says: "Macintosh HD" can't be used because it doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options. So I followed the above instructions, and I got to the last step, where I'm supposed to click the 'Options' button, the problem is that I cannot click that button, it is disabled.. So what am I supposed to do?

    Read the article

  • xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context

    - by mmc18
    When I executed xl2tpd I amhaving following error. # xl2tpd -D xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context xl2tpd[845]: init: Unable to load config file When I remove the "line 13" I having same error with "Line 14" thefore I do not think that the problem is about "ipsec sared" Here is my configuration file xl2tpd.conf. LINUX Ubuntu 12.0.4 ;Openswan IPsec 2.6.37; xl2tpd version: xl2tpd-1.3.1 ; [global] ipsec sared=yes listen-addr=47.168.137.27 ; [lns default] ip range = 192.168.1.10-192.168.1.20 local ip = 192.168.1.1 require chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes name=LinuxIPSECVPN ANSWER:(since have not enough reputation I am writting it over here.) removing the ";" character at the beginning of [global] and [lns default] have solved the issue. At fist I tought that [global] and[lns default] were just a comment.

    Read the article

  • Bring the windows of two different apps in mac os to the front?

    - by Nicolas Kokkalis
    How do I easily bring to the front of the screen the top windows of two different application in Mac OS X? I prefer to use the keyboard only. Example Scenario: Say there are 10 Firefox and 10 TextEdit windows open. Also, say that these windows are having various different sizes so that the windows of each application fully cover the desktop. Goal: I want to bring to the front of my screen the top window of Firefox along with the top window of TextEdit, so that I can visually compare some data. Restrictions: I cannot use expose (since having 20 windows on the screen already renders expose useless) And I do not want to use multiple desktop (too complex and time consuming) I prefer to use a keyboard shortcut. Unfortunately cmd+tab brings all windows of each application to the top, covering all windows of the other applications.

    Read the article

  • How to calculate checksum?

    - by Patel Rikin
    I m developing instrument driver and i want to know how to calculate checksum of frame. Explanation: Expressed by characters [0-9] and [A-F]. Characters beginning from the character after [STX] and until [ETB] or [ETX] (including [ETB] or [ETX]) are added in binary. The 2-digit numbers, which represent the least significant 8 bits in hexadecimal code, are converted to ASCII characters [0-9] and [A-F]. The most significant digit is stored in CHK1 and the least significant digit in CHK2. This is sample frame : <STX>2Q|1|2^1||||20011001153000<CR><ETX><CHK1><CHK2><CR><LF> and i want to know what is value of chk1 and chk2 and i am new in this so i m totally blank about how to calculate checksum i am not getting above 3rd and 4th point. can any one provide sample code for c#. Please help me.

    Read the article

  • Windows Vista language text service problem

    - by Azho KG
    Hi, All I'm using English version of Vista and having problems with using programs that display Russian characters somewhere. For example dictionaries doesn't work for me, since they display Russian character. Also I see just "magic" characters in text editor (notepad) when open a Russian text file. I tried to change whole Vista Interface language to Russian, but it still didn't solve the problem. I CAN read any web page from browser, that's not a problem. Also adding "Russian" in "Text Services and Input Languages" doesn't solve this problem. Does anyone know how to solve this? Thanks. My System: 32-bit Windows Vista Home Premium - SP2

    Read the article

  • ASP.NET MVC File Upload Error - "The input is not a valid Base-64 string"

    - by Justin
    Hey all, I'm trying to add a file upload control to my ASP.NET MVC 2 form but after I select a jpg and click Save, it gives the following error: The input is not a valid Base-64 string as it contains a non-base 64 character, more than two padding characters, or a non-white space character among the padding characters. Here's the view: <% using (Html.BeginForm("Save", "Developers", FormMethod.Post, new {enctype = "multipart/form-data"})) { %> <%: Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <div class="editor-label"> Login Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.LoginName) %> <%: Html.ValidationMessageFor(model => model.LoginName) %> </div> <div class="editor-label"> Password </div> <div class="editor-field"> <%: Html.Password("Password") %> <%: Html.ValidationMessageFor(model => model.Password) %> </div> <div class="editor-label"> First Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.FirstName) %> <%: Html.ValidationMessageFor(model => model.FirstName) %> </div> <div class="editor-label"> Last Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.LastName) %> <%: Html.ValidationMessageFor(model => model.LastName) %> </div> <div class="editor-label"> Photo </div> <div class="editor-field"> <input id="Photo" name="Photo" type="file" /> </div> <p> <%: Html.Hidden("DeveloperID") %> <%: Html.Hidden("CreateDate") %> <input type="submit" value="Save" /> </p> </fieldset> <% } %> And the controller: //POST: /Secure/Developers/Save/ [AcceptVerbs(HttpVerbs.Post)] public ActionResult Save(Developer developer) { //get profile photo. var upload = Request.Files["Photo"]; if (upload.ContentLength > 0) { string savedFileName = Path.Combine( ConfigurationManager.AppSettings["FileUploadDirectory"], "Developer_" + developer.FirstName + "_" + developer.LastName + ".jpg"); upload.SaveAs(savedFileName); } developer.UpdateDate = DateTime.Now; if (developer.DeveloperID == 0) {//inserting new developer. DataContext.DeveloperData.Insert(developer); } else {//attaching existing developer. DataContext.DeveloperData.Attach(developer); } //save changes. DataContext.SaveChanges(); //redirect to developer list. return RedirectToAction("Index"); } Thanks, Justin

    Read the article

  • How can I dynamically change auto complete entries in a C# combobox or textbox?

    - by Sam Hopkins
    I have a combobox in C# and I want to use auto complete suggestions with it, however I want to be able to change the auto complete entries as the user types, because the possible valid entries are far too numerous to populate the AutoCompleteStringCollection at startup. As an example, suppose I'm letting the user type in a name. I have a list of possible first names ("Joe", "John") and a list of surnames ("Bloggs", "Smith"), but if I have a thousand of each, then that would be a million possible strings - too many to put in the auto complete entries. So initially I want to have just the first names as suggestions ("Joe", "John") , and then once the user has typed the first name, ("Joe"), I want to remove the existing auto complete entries and replace them with a new set consisting of the chosen first name followed by the possible surnames ("Joe Bloggs", "Joe Smith"). In order to do this, I tried the following code: void InitializeComboBox() { ComboName.AutoCompleteMode = AutoCompleteMode.SuggestAppend; ComboName.AutoCompleteSource = AutoCompleteSource.CustomSource; ComboName.AutoCompleteCustomSource = new AutoCompleteStringCollection(); ComboName.TextChanged += new EventHandler( ComboName_TextChanged ); } void ComboName_TextChanged( object sender, EventArgs e ) { string text = this.ComboName.Text; string[] suggestions = GetNameSuggestions( text ); this.ComboQuery.AutoCompleteCustomSource.Clear(); this.ComboQuery.AutoCompleteCustomSource.AddRange( suggestions ); } However, this does not work properly. It seems that the call to Clear() causes the auto complete mechanism to "turn off" until the next character appears in the combo box, but of course when the next character appears the above code calls Clear() again, so the user never actually sees the auto complete functionality. It also causes the entire contents of the combo box to become selected, so between every keypress you have to deselect the existing text, which makes it unusable. If I remove the call to Clear() then the auto complete works, but it seems that then the AddRange() call has no effect, because the new suggestions that I add do not appear in the auto complete dropdown. I have been searching for a solution to this, and seen various things suggested, but I cannot get any of them to work - either the auto complete functionality appears disabled, or new strings do not appear. Here is a list of things I have tried: Calling BeginUpdate() before changing the strings and EndUpdate() afterwards. Calling Remove() on all the existing strings instead of Clear(). Clearing the text from the combobox while I update the strings, and adding it back afterwards. Setting the AutoCompleteMode to "None" while I change the strings, and setting it back to "SuggestAppend" afterwards. Hooking the TextUpdate or KeyPress event instead of TextChanged. Replacing the existing AutoCompleteCustomSource with a new AutoCompleteStringCollection each time. None of these helped, even in various combinations. Spence suggested that I try overriding the ComboBox function that gets the list of strings to use in auto complete. Using a reflector I found a couple of methods in the ComboBox class that look promising - GetStringsForAutoComplete() and SetAutoComplete(), but they are both private so I can't access them from a derived class. I couldn't take that any further. I tried replacing the ComboBox with a TextBox, because the auto complete interface is the same, and I found that the behaviour is slightly different. With the TextBox it appears to work better, in that the Append part of the auto complete works properly, but the Suggest part doesn't - the suggestion box briefly flashes to life but then immediately disappears. So I thought "Okay, I'll

    Read the article

  • Helicon ISAPI Rewrite is processing Rewrite Rules for httpd.conf but not .htaccess

    - by James Lawruk
    We have Helicon ISAPI Rewrite 3 installed on our Windows 2003 Web server. The RewriteRules work fine in the global file located in the httpd.conf file. The server serves several Web sites and we were hoping to create RewriteRules to apply to specific Web sites. In the IIS Properties for each Web site there exists a separate tab for ISAPI_Rewrite pointing to the .htaccess file for that Web site. No rules applied to the .htaccess files work. Any ideas why the .htaaccess files have no effect.

    Read the article

  • selectLimit in JQgrid

    - by Leander
    Hallo, I have a problem. I'am trying to get some data from my database. But with a limit. So i use the selectLimit command. But when i load the grid my firebug gives the following error: "parsererror"?e:null},parse:function(d...d(a.fn.jqGrid,d);this.no_legacy_api|| When I go to the selectLimit in the jqgrid.php and print out what the function returns it normaly return an array with all 500 objects with the correct data. This is the code of the grid: <?php require_once ($_SERVER['DOCUMENT_ROOT'].'/includes_config/config.inc.php'); require_once ($_SERVER['DOCUMENT_ROOT'].'/portal/classes/core/database/class_Database_control.php'); $dtb = new clsDatabaseControl(); $dtb = $dtb->getDatabase(ConnectionString); $dtb->doConnect(); require_once (ClassRoot.'/3rd/jqgrid/jq-config.php'); require_once (ClassRoot.'/3rd/jqgrid/php/jqGrid.php'); require_once (ClassRoot.'/3rd/jqgrid/php/jqGridPdo.php'); //require_once (ClassRoot.'/modules/logging/class_logging_control.php'); // //$oLogginControl = new clsLoggingControl($dtb); //$sSQL = $oLogginControl->getAanmeldingenGrid(); $sSQL = "SELECT LogAanmeldID, LogAanmeldStamp, UserFirstName, UserLastName, LogAanmeldIP, LogAanmeldMethod, LogAanmeldHost, LogAanmeldAgent FROM log_aanmelden, user WHERE log_aanmelden.LogAanmeldUserID = user.UserID"; $conn = new PDO(DB_DSN,DB_USER,DB_PASSWORD); $conn->query("SET NAMES utf8"); $grid = new jqGridRender($conn); //$grid->SelectCommand = $sSQL; $grid->selectLimit($sSQL ,500,1); $grid->dataType = 'json'; $grid->setColModel(); $grid->setUrl('modules/module_logging/index.php?grid=2'); $grid->setGridOptions(array( "hoverrows"=>true, //"sortname"=>"naam", "height"=>450 )); // Enable toolbar searching $grid->toolbarfilter = true; $grid->setFilterOptions(array("stringResult"=>true)); $grid->navigator = true; $grid->setNavOptions('navigator', array("excel"=>true,"add"=>false,"edit"=>false,"del"=>false,"view"=>true, "refresh"=>false)); $custom = <<<CUSTOM $(document).ready(function() { gridParentWidth = $(window).width(); $('#grid').jqGrid('setGridWidth',gridParentWidth-10); }) $(window).resize(function() { gridParentWidth = $(window).width(); $('#grid').jqGrid('setGridWidth',gridParentWidth-10); }); function formatAddAdresboek(cellValue, options, rowObject) { var imageHtml = "<a href='?FFID=51000&TID=1&INS=3&contactID=" + cellValue + "' originalValue='" + cellValue + "'><img border='0' alt='Toevoegen aan Persoonlijk Adresboek' src='images/16X16/new_user.gif'/></a>"; imageHtml = imageHtml + " <a href='?FFID=51000&TID=2&INS=3&contactID=" + cellValue + "' originalValue='" + cellValue + "'><img border='0' alt='Toevoegen aan Praktijk Adresboek' src='images/16X16/new_usergroup.gif'/></a>"; return imageHtml; } function unformatAddAdresboek(cellValue, options, cellObject) { return $(cellObject.html()).attr("originalValue"); } CUSTOM; $grid->setJSCode($custom); // Enjoy $grid->renderGrid('#grid','#pager',true, null, null, true,true); $conn = null; ?> When I inspect the $_GET the answer is empty and in stead of a JSON tab there is an HTML tab. When i use the selectCommand in stead of the selectLimit it return all the data correct as an json object an parses it correcly in the grid but it doens't use the LIMIT, Because when i add the limit. PDO doens't work anymore. So how do I get the object from the selectLimit to the grid? Can someone please help me get the grid working?

    Read the article

  • SubSonic Stored Procedure Issue - Data Generated at Stored Procedure is different from Data Received

    - by ShaShaIn
    Hi All, I am facing a unknown problem while using stored procedure with SubSonic. I have written a stored procedure & application code that takes first name & last name as input parameter and return last login id as ouput parameter. It creates login id as first character of first name & complete last name for no-existing login id otherwise it adds 1 in the last login id e.g. First Name - Mark, Last Name - Waugh, First Login Id - MWaugh, Second Login Id - MWaugh1, Third Login Id - MWaugh2 etc. Stored Procedure SET ANSI_NULLS OFF GO SET QUOTED_IDENTIFIER ON GO CREATE PROCEDURE [dbo].[Users_FetchLoginId] ( @FirstName nvarchar(64), @LastName nvarchar(64), @LoginId nvarchar(256) OUTPUT ) AS DECLARE @UserId nvarchar(256); SET @UserId = NULL; SET @LoginId = NULL; SELECT @UserId = LoweredUserName FROM aspnet_Users WHERE LoweredUserName LIKE (LOWER(SUBSTRING(@FirstName,1,1) + @LastName)) IF @@rowcount = 0 OR @UserId IS NULL BEGIN SET @LoginId = (SUBSTRING(@FirstName, 1, 1) + @LastName); print @LoginId RETURN 1; END ELSE BEGIN SELECT TOP 1 LoweredUserName FROM aspnet_Users WHERE LoweredUserName LIKE (LOWER(SUBSTRING(@FirstName,1,1) + @LastName + '%')) ORDER BY LoweredUserName DESC RETURN 2; END Application Code public string FetchLoginId(string firstName, string lastName) { SubSonic.StoredProcedure sp = SPs.UsersFetchLoginId( firstName, lastName, null ); sp.Command.AddReturnParameter(); sp.Execute(); if (sp.Command.Parameters.Find(delegate(QueryParameter queryParameter) { return queryParameter.Mode == ParameterDirection.ReturnValue; }).ParameterValue != System.DBNull.Value) { int returnCode = Convert.ToInt32(sp.Command.Parameters.Find(delegate(QueryParameter queryParameter) { return queryParameter.Mode == ParameterDirection.ReturnValue; }).ParameterValue, CultureInfo.InvariantCulture); if (returnCode == 1) { // UserName as First Character of First Name & Full Last Name return sp.Command.Parameters[2].ParameterValue.ToString(); } if (returnCode == 2) { DataSet ds = sp.GetDataSet(); if (null == ds || null == ds.Tables[0] || 0 == ds.Tables[0].Rows.Count) return ""; string maxLoginId = ds.Tables[0].Rows[0]["LoweredUserName"].ToString(); string initialLoginId = firstName.Substring(0, 1) + lastName; int maxLoginIdIndex = 0; int initialLoginIdLength = initialLoginId.Length; if (maxLoginId.Substring(initialLoginIdLength).Length == 0) { maxLoginIdIndex++; // UserName as Max Lowered User Name Found & Incrementer as Suffix (Here, First Incrementer i.e. 1) return (initialLoginId + maxLoginIdIndex); } if (int.TryParse(maxLoginId.Substring(initialLoginIdLength), out maxLoginIdIndex)) { if (maxLoginIdIndex > 0) { maxLoginIdIndex++; // UserName as Max Lowered User Name Found & Incrementer as Suffix return (initialLoginId + maxLoginIdIndex); } } } } Now the problem is for some input (see test data below), the login id created at sql server end correctly but at application subsonic dal side, it truncates some characters. First Name - Jenelia and Last Name - Kanupatikenalaalayampentyalavelugoplansubhramanayam [dbo].[Users_FetchLoginId] - Execute Stored Procedure Separately - Login Id Is Correct JKanupatikenalaalayampentyalavelugoplansubhramanayam public string FetchLoginId(string firstName, string lastName) - Application Code DAL Side - LginId Is Wrongly Received From Stored Procedure JKanupatikenalaalayampentyalavelugoplansubhramanay You can easily see that 2 charactes are removed. If the data is correctly generated by stored procedure then why the characters are removed when data is received in output parameter of stored procedure? Is it due to any internal known or unknown bug of SubSonic? Your help is significant. Thanks in advance...

    Read the article

  • window.focus() not working in Google Chrome

    - by nickyt
    Hey folks, Just wondering if Google Chrome is going to support window.focus() at some point. When I mean support, I mean have it work. The call to it doesn't fail, it just doesn't do anything. All other major browsers do not have this problem: FireFox, IE6-IE8 and Safari. I have a client-side class for managing browser windows. When I first create a window the window comes into focus, but subsequent attempts to bring focus to the window do not work. From what I can tell, this appears to be a security feature to avoid annoying pop-ups and it does not appear to be a WebKit issue as it works in Safari. I know one idea someone brought forward was to close the window then reopen it, but this is a horrible solution. Googling shows that I do not appear to be the only person frustrated with this. And just to be 100% clear, I mean new windows, not tabs (tabs cannot be focused from what I've read) and all the windows being opened are in the same domain. Any ideas? MyCompany = { UI: {} }; // Put this here if you want to test the code. I create these namespaces elsewhere in code. MyCompany.UI.Window = new function() { // Private fields var that = this; var windowHandles = {}; // Public Members this.windowExists = function(windowTarget) { return windowTarget && windowHandles[windowTarget] && !windowHandles[windowTarget].closed; } this.open = function(url, windowTarget, windowProperties) { // See if we have a window handle and if it's closed or not. if (that.windowExists(windowTarget)) { // We still have our window object so let's check if the URLs is the same as the one we're trying to load. var currentLocation = windowHandles[windowTarget].location; if ( ( /^http(?:s?):/.test(url) && currentLocation.href !== url ) || ( // This check is required because the URL might be the same, but absolute, // e.g. /Default.aspx ... instead of http://localhost/Default.aspx ... !/^http(?:s?):/.test(url) && (currentLocation.pathname + currentLocation.search + currentLocation.hash) !== url ) ) { // Not the same URL, so load the new one. windowHandles[windowTarget].location = url; } // Give focus to the window. This works in IE 6/7/8, FireFox, Safari but not Chrome. // Well in Chrome it works the first time, but subsequent focus attempts fail,. I believe this is a security feature in Chrome to avoid annoying popups. windowHandles[windowTarget].focus(); } else { // Need to do this so that tabbed browsers (pretty much all browsers except IE6) actually open a new window // as opposed to a tab. By specifying at least one window property, we're guaranteed to have a new window created instead // of a tab. windowProperties = windowProperties || 'menubar=yes,location=yes,width=700, height=400, scrollbars=yes, resizable= yes'; windowTarget = windowTarget || "_blank"; // Create a new window. var windowHandle = windowProperties ? window.open(url, windowTarget, windowProperties) : window.open(url, windowTarget); if (null === windowHandle) { alert("You have a popup blocker enabled. Please allow popups for " + location.protocol + "//" + location.host); } else { if ("_blank" !== windowTarget) { // Store the window handle for reuse if a handle was specified. windowHandles[windowTarget] = windowHandle; windowHandles[windowTarget].focus(); } } } } }

    Read the article

  • Mercurial hg clone on Windows via ssh with copSSH issue

    - by Kyle Tolle
    I have a Windows Server 2008 machine (iis7) that has CopSSH set up on it. To connect to it, I have a Windows 7 machine with Mercurial 1.5.1 (and TortoiseHg) installed. I can connect to the server using PuTTY with a non-standard ssh port and a .ppk file just fine. So I know the server can be SSH'd into. Next, I wanted to use the CLI to connect via hg clone to get a private repo. I've seen elsewhere that you need to have ssh configured in your mercurial.ini file, so my mercurial.ini has a line: ssh = plink.exe -ssh -C -l username -P #### -i "C:/Program Files/PuTTY/Key Files/KyleKey.ppk" Note: username is filled in with the username I set up via copSSH. #### is filled in with the non-standard ssh port I've defined for copSSH. I try to do the command hg clone ssh://inthom.com but I get this error: remote: bash: inthom.com: command not found abort: no suitable response from remote hg! It looks like hg or plink parses the hostname such that it thinks that inthom.com is a command instead of the server to ssh to. That's really odd. Next, I tried to just use plink to connect by plink -P #### ssh://inthom.com, and I am then prompted for my username, and next password. I enter them both and then I get this error: bash: ssh://inthom.com: No such file or directory So now it looks like plink doesn't parse the hostname correctly. I fiddled around for a while trying to figure out how to do call hg clone with an empty ssh:// field and eventually figured out that this command allows me to reach the server and clone a test repo on the inthom.com server: hg clone ssh://!/Repos/test ! is the character I've found that let's me leave the hostname blank, but specify the repo folder to clone. What I really don't understand is how plink knows what server to ssh to at all. neither my mercurial.ini nor the command specify a server. None of the hg clone examples I've seen have a ! character. They all use an address, which makes sense, so you can connect to any repo via ssh that you want to clone. My only guess is that it somehow defaults to the last server I used PuTTY to SSH to, but I SSH'd into another server, and then tried to use plink to get to it, but plink still defaults to inthom.com (verified with the -v arg to plink). So I am at a loss as to how plink gets this server value at all. For "fun", I tried using TortoiseHg and can only clone a repo when I use ssh://!/Repos/test as the Source. Now, you can see that, since plink doesn't parse the hostname correctly, I had to specify the port number and username in the mercurial.ini file, instead of in the hostname like [email protected]:#### like you'd expect to. Trying to figure this out at first drove me insane, because I would get errors that the host couldn't be reached, which I knew shouldn't be the case. My question is how can I configure my setup so that ssh://[email protected]:####/Repos/test is parsed correctly as the username, hostname, port number, and repo to copy? Is it something wrong with the version of plink that I'm using, or is there some setting I may have messed up? If it is plink's fault, is there an alternative tool I can use? I'm going to try to get my friend set up to connect to this same repo, so I'd like to have a clean solution instead of this ! business. Especially when I have no idea how plink gets this default server, so I'm not sure if he'd even be able to get to inthom.com correctly. PS. I've had to use a ton of different tutorials to even get to this stage. Therefore, I haven't tried pushing any changes to the server yet. Hopefully I'll get this figured out and then I can try pushing changes to the repo.

    Read the article

  • Multiple IP addresses on one NIC register twice in DNS server

    - by Brad B.
    Hi, We've got a build server (Windows Server 2008 SP2, 64-bit) which has one NIC and two IP addresses registered to that NIC (192.168.1.30 and 192.168.1.31). The build server is registering two identical Host (A) records for itself in our DNS server: buildserver.example.com = 192.168.1.30 buildserver.example.com = 192.168.1.31 I know in the "Advanced TCP/IP Settings" window for the build server's NIC, under the "DNS" tab, there is a check box labeled "Register this connection's addresses in DNS". I only want ONE of the IP addresses (ending in .30) to be registered in DNS not both of them. Can that be done? My best guess is to disable the "Register this connection's addresses in DNS" and manually add the Host (A) record to our DNS server. Thanks for any help!

    Read the article

  • Conky truncates text loaded from file

    - by takeshin
    I'm trying to configure conky on Ubuntu, because I need to display my todo list on the desktop. The the file is displayed, but the text is truncated (not rectangular, just after some character limit). How to display the whole file? Here is my setup: # Text alignment, other possible values are commented alignment top_right # Gap between borders of screen and text gap_x 10 gap_y 10 # Maximum size of buffer for user text, i.e. below TEXT line. max_user_text 16384 # stuff after 'TEXT' will be formatted on screen TEXT ${execi 30 cat /home/user/Documents/todo.txt}

    Read the article

  • Unable to Create System DSN

    - by Baxter
    Environment: Windows 7 Professional 64-bit Operating System Problem: (ODBC Data Source Administrator) Opening Administrative Tools - Data Sources (ODBC) - Click "System DSN" tab. Error: ODBC System DSN Warning You are logged on with non-Administrative privileges. System DSNs could not be created or modified. Failed Troubleshooting so far: Enabled local Administrator account logged in under this account. Navigated to C:\Windows\System32\ right clicked odbcad32.exe Run as Administrator Notes: I am an Administrator on this machine. The 32-bit version runs fine if I open C:\Windows\SysWoW64\odbcad32.exe However, I need the data source to be 64-bit. I am not experiencing this problem on any of my other 64-bit machines. Any help would be greatly appreciated.

    Read the article

  • notepad sql Unicode and Non Unicode

    - by RBrattas
    Hi, I have a Microsoft Notepad flate file with data and Vertical Bar as column delimiter. I get following message: cannot convert between unicode and non-unicode string data types It seems it is my nvarchar(max) that creates my problem. I changed to varchar(max); but still the same problem. How do I insert my flate file into my SQL Server 2005? And in the SQL Server 2005 import and export wizard the flate file source advanced tab the OutputColumnWith is 50. Will that say my flate file column is max 50? I hope not because my column is more then 50... Thank you, Rune

    Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >