Search Results

Search found 51125 results on 2045 pages for 'access point'.

Page 26/2045 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • How do I require use of the 5 GHz band when connecting to a Wireless N access point?

    - by cqcallaw
    What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

    Read the article

  • Lerping to a center point while in motion

    - by Fibericon
    I have an enemy that initially flies in a circular motion, while facing away from the center point. This is how I achieve that: position.Y = (float)(Math.Cos(timeAlive * MathHelper.PiOver4) * radius + origin.Y); position.X = (float)(Math.Sin(timeAlive * MathHelper.PiOver4) * radius + origin.X); if (timeAlive < 5) { angle = (float)Math.Atan((0 - position.X) / (0 - position.Y)); if (0 < position.Y) RotationMatrix = Matrix.CreateRotationX(MathHelper.PiOver2) * Matrix.CreateRotationZ(-1 * angle); else RotationMatrix = Matrix.CreateRotationX(MathHelper.PiOver2) * Matrix.CreateRotationZ(MathHelper.Pi - angle); } That part works just fine. After five seconds of this, I want the enemy to turn inward, facing the center point. However, I've been trying to lerp to that point, since I don't want it to simply jump to the new rotation. Here's my code for trying to do that: else { float newAngle = -1 * (float)Math.Atan((0 - position.X) / (0 - position.Y)); angle = MathHelper.Lerp(angle, newAngle, (float)gameTime.ElapsedGameTime.Milliseconds / 1000); if (0 < position.Y) RotationMatrix = Matrix.CreateRotationX(MathHelper.PiOver2) * Matrix.CreateRotationZ(MathHelper.Pi - angle); else RotationMatrix = Matrix.CreateRotationX(MathHelper.PiOver2) * Matrix.CreateRotationZ(-1 * angle); } That doesn't work so fine. It seems like it's going to at first, but then it just sort of skips around. How can I achieve what I want here?

    Read the article

  • Point an external domain to a shared hosting website

    - by dailgez004
    I bought a domain from a seller (GoDaddy), and wish to point it at a shared hosting website (ASmallOrange). Googling tells me it's fairly straightforward: Step 1: On the external domain's DNS, configure two NS records for the two nameservers of the hosting service. Step 2: Wait 2-48 hours. I'm puzzled because it can't be that simple. I've told the DNS where to look, but since it's shared hosting, the hosting service needs to know what site to point the domain to. And indeed, after I've performed the above steps, visiting the domain leads me to a generic message from the shared hosting service. Okay, so I have to configure the DNS on the hosting service, right? The service I use (ASmallOrange) uses cPanel. What I tried is to set up a Parked Domain for the externally bought domain; when I go into the Advanced DNS Zone Editor, sure enough, the DNS for the external domain shows up as something I can configure. Yet, visiting the externally registered domain still points me to the generic shared server page. I'm convinced I'm doing something wrong. Could someone debug my thought process? Or perhaps offer alternate solutions? Right now, I'm considering trying to set up a CNAME record on the external domain to point to the domain I registered through the shared host -- but I have a vague impression that this is bad practice.

    Read the article

  • How do I create a WiFi hotspot sharing wireless internet connection (single adapter)?

    - by Ruppesh Nalwaya
    I know how to create a hotspot when connected to a wired network, but when I am using internet from a WiFi connection, this disconnects the wireless connection the moment I activate the hotspot. In Windows I can use Connectify Hotspot, which enables me to share the internet connection from the same wireless adapter as I am creating an access point on. As you can read on the technology overview page: Access Point mode allows you to create a hotspot using the same Wi-Fi card that you are using to access the Internet. How do I do this on Ubuntu?

    Read the article

  • Deny http access to a directory, allow access from WordPress plugin

    - by luke
    Hey. I need to prevent direct access to http://www.site.com/wp-content/uploads/folder/something.pdf through the browser. However the Download Monitor plugin I am using, which allows logged in users to download the file, needs to be able to work. Trying Order Allow,Deny Deny from all Allow from all but the download links do not now work... even though (I think) they are links produced by the script e.g. http://www.site.com/wp-content/plugins/download-monitor/download.php?id=something.pdf Enter that in the address bar and you correctly get a WordPress message, 'You must be logged in to download this file.' However, if someone knows the URL where the file was uploaded http://www.site.com/wp-content/uploads/folder/something.pdf they can still access it directly. I don't know how (guesswork?) they would find the direct URL anyway, but the client wants it stopped! Thanks for any help.

    Read the article

  • What's the point of the Prototype design pattern?

    - by user1905391
    So I'm learning about design patterns in school. Many of them are silly little ideas, but nevertheless solve some recurring problems(singleton, adapters, asynchronous polling, ect). But today I was told about the so called 'Prototype' design pattern. I must be missing something, because I don't see any benefits from it. I've seen people online say it's faster than using "new"' but this is doesn't make any sense, since at some point, regardless how the new object is created, memory needs to be allocated for it ect. Furthermore, doesn't this pattern run in the same circles as the 'chicken or egg' problem? By this I mean, since the prototype pattern essentially is just cloning objects, at some point the original object must be created itself (ie, not cloned). So this would mean, that I would need to have an existing copy of every object that I would ever want to clone already ready to clone? Seems stupid to me. Can anyone explain what the use of this pattern is? Original post: http://stackoverflow.com/questions/13887704/whats-the-point-of-the-prototype-design-pattern

    Read the article

  • How to access the remote OPC server programatically ?

    - by Shailesh Jaiswal
    I have downloaded & installed the OPCDA.NET client component evaluation & XMLDA.NET client component evaluation. It provides some C# samples for browsing the available OPC Server, connecting to the OPC server, & browsing the available items on the server. I know the programatic way in which we can access the local OPC server. It is provided in the sample C# applications. I have installed the OPC server on another machine ( remote machine ). I have done all the required setting related to the 'dcomcnfg' utility. I can access the remote OPC server from client machine by using the Test Client provided by the OPCDA.NET client component evaluation & XMLDA.NET client component evaluation. But I am unaware of how this can be done programmatically. In the available C# samples I found no such programatic part (coding ) in which we can access the remote OPC server. Can you provide me the code through which I can browse the available remote machines in my network, available OPC server on each machine after selecting the specific machine name, connecting to the OPC server & browsing the available items on the server ? or Can you provide me the any link through which I can resolve the above issue ?

    Read the article

  • How to access this data in PHP?

    - by George Edison
    Okay. Now I give up. I have been playing with this for hours. I have a variable name $data. The variable contains these contents: array ( 'headers' => array ( 'content-type' => 'multipart/alternative; boundary="_689e1a7d-7a0a-442a-bd6c-a1fb1dc2993e_"', ), 'ctype_parameters' => array ( 'boundary' => '_689e1a7d-7a0a-442a-bd6c-a1fb1dc2993e_', ), 'parts' => array ( 0 => stdClass::__set_state(array( 'headers' => array ( 'content-type' => 'text/plain; charset="iso-8859-1"', 'content-transfer-encoding' => 'quoted-printable', ), 'ctype_primary' => 'text', )), ), ) I removed some non-essential data. I want to access the headers value (on the second line above) - simple: $data->headers I want to access the headers value (on the fourteenth line after the stdClass:: stuff) - how? How can I possibly access the values within the stdClass::__set_state section? I tried var_export($data->parts); but all I get is NULL

    Read the article

  • MS Access Interop - How to set print filename?

    - by Ryan
    Hi all, I'm using Delphi 2009 and the MS Access Interop COM API. I'm trying to figure out two things, but one is more important than the other right now. I need to know how to set the file name when sending the print job to the spooler. Right now it's defaulting to the Access DB's name, which can be something different than the file's name. I need to just ensure that when this is printed it enters the print spool using the same filename as the actual file itself - not the DB's name. My printer spool is actually a virtual print driver that converts documents to an image. That's my main issue. The second issue is how to specify which printer to use. This is less important at the moment because I'm just using the default printer for now. It would be nice if I could specify the printer to use, though. Does anyone know either of these two issues? Thank you in advance. I'll go ahead and paste my code: unit Converter.Handlers.Office.Access; interface uses sysutils, variants, Converter.Printer, Office_TLB, Access_TLB, UDC_TLB; procedure ToTiff(p_Printer: PrinterDriver; p_InputFile, p_OutputFile: String); implementation procedure ToTiff(p_Printer: PrinterDriver; p_InputFile, p_OutputFile: String); var AccessApp : AccessApplication; begin AccessApp := CoAccessApplication.Create; AccessApp.Visible := False; try AccessApp.OpenCurrentDatabase(p_InputFile, True, ''); AccessApp.RunCommand(acCmdQuickPrint); AccessApp.CloseCurrentDatabase; finally AccessApp.Quit(acQuitSaveNone); end; end; end.

    Read the article

  • Binding a date string parameter in an MS Access PDO query

    - by harryg
    I've made a PDO database class which I use to run queries on an MS Access database. When querying using a date condition, as is common in SQL, dates are passed as a string. Access usually expects the date to be surrounded in hashes however. E.g. SELECT transactions.amount FROM transactions WHERE transactions.date = #2013-05-25#; If I where to run this query using PDO I might do the following. //instatiate pdo connection etc... resulting in a $db object $stmt = $db->prepare('SELECT transactions.amount FROM transactions WHERE transactions.date = #:mydate#;'); //prepare the query $stmt->bindValue('mydate', '2013-05-25', PDO::PARAM_STR); //bind the date as a string $stmt->execute(); //run it $result = $stmt->fetch(); //get the results As far as my understanding goes the statement that results from the above would look like this as binding a string results in it being surrounded by quotes: SELECT transactions.amount FROM transactions WHERE transactions.date = #'2013-05-25'#; This causes an error and prevents the statement from running. What's the best way to bind a date string in PDO without causing this error? I'm currently resorting to sprintf-ing the string which I'm sure is bad practise. Edit: if I pass the hash-surrounded date then I still get the error as below: Fatal error: Uncaught exception 'PDOException' with message 'SQLSTATE[22018]: Invalid character value for cast specification: -3030 [Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. (SQLExecute[-3030] at ext\pdo_odbc\odbc_stmt.c:254)' in C:\xampp\htdocs\ips\php\classes.php:49 Stack trace: #0 C:\xampp\htdocs\ips\php\classes.php(49): PDOStatement-execute() #1 C:\xampp\htdocs\ips\php\classes.php(52): database-execute() #2 C:\xampp\htdocs\ips\try2.php(12): database-resultset() #3 {main} thrown in C:\xampp\htdocs\ips\php\classes.php on line 49

    Read the article

  • Boost::thread mutex issue: Try to lock, access violation

    - by user1419305
    I am currently learning how to multithread with c++, and for that im using boost::thread. I'm using it for a simple gameengine, running three threads. Two of the threads are reading and writing to the same variables, which are stored inside something i call PrimitiveObjects, basicly balls, plates, boxes etc. But i cant really get it to work, i think the problem is that the two threads are trying to access the same memorylocation at the same time, i have tried to avoid this using mutex locks, but for now im having no luck, this works some times, but if i spam it, i end up with this exception: First-chance exception at 0x00cbfef9 in TTTTT.exe: 0xC0000005: Access violation reading location 0xdddddded. Unhandled exception at 0x77d315de in TTTTT.exe: 0xC0000005: Access violation reading location 0xdddddded. These are the functions inside the object that im using for this, and the debugger is also blaming them for the exception. void PrimitiveObj::setPos(glm::vec3 in){ boost::mutex mDisposingMutex; boost::try_mutex::scoped_try_lock lock(mDisposingMutex); if ( lock) { position = in; boost::try_mutex::scoped_try_lock unlock(mDisposingMutex); } } glm::vec3 PrimitiveObj::getPos(){ boost::mutex myMutex; boost::try_mutex::scoped_try_lock lock(myMutex); if ( lock) { glm::vec3 curPos = position; boost::try_mutex::scoped_try_lock unlock(myMutex); return curPos; } return glm::vec3(0,0,0); } Any ideas?

    Read the article

  • Passing a parameter in a Report's Open Event to a parameter query (Access 2007)

    - by JPM
    Hi there, I would like to know if there is a way to set the parameters in an Access 2007 query using VBA. I am new to using VBA in Access, and I have been tasked with adding a little piece of functionality to an existing app. The issue I am having is that the same report can be called in two different places in the application. The first being on a command button on a data entry form, the other from a switchboard button. The report itself is based on a parameter query that has requires the user to enter a Supplier ID. The user would like to not have to enter the Supplier ID on the data entry form (since the form displays the Supplier ID already), but from the switchboard, they would like to be prompted to enter a Supplier ID. Where I am stuck is how to call the report's query (in the report's open event) and pass the SupplierID from the form as the parameter. I have been trying for a while, and I can't get anything to work correctly. Here is my code so far, but I am obviously stumped. Private Sub Report_Open(Cancel As Integer) Dim intSupplierCode As Integer 'Check to see if the data entry form is open If CurrentProject.AllForms("frmExample").IsLoaded = True Then 'Retrieve the SupplierID from the data entry form intSupplierCode = Forms![frmExample]![SupplierID] 'Call the parameter query passing the SupplierID???? DoCmd.OpenQuery "qryParams" Else 'Execute the parameter query as normal DoCmd.OpenQuery "qryParams"????? End If End Sub I've tried Me.SupplierID = intSupplierCode, and although it compiles, it bombs when I run it. And here is my SQL code for the parameter query: PARAMETERS [Enter Supplier] Long; SELECT Suppliers.SupplierID, Suppliers.CompanyName, Suppliers.ContactName, Suppliers.ContactTitle FROM Suppliers WHERE (((Suppliers.SupplierID)=[Enter Supplier])); I know there are ways around this problem (and probably an easy way as well) but like I said, my lack of experience using Access and VBA makes things difficult. If any of you could help, that would be great!

    Read the article

  • Accessing MS Access database from C#

    - by Abilash
    I want to use MS Access as database for my C# windows form application.I have used OleDb driver for connecting MS Access. I am able to select the records from the MS Access using OleDbConnection and ExecuteReader.But I am un able to insert,update and delete records. My code is as follows: OleDbConnection con=new OleDbConnection(strCon); try { con.Open(); OleDbCommand com = new OleDbCommand("INSERT INTO DPMaster(DPID,DPName,ClientID,ClientName) VALUES('53','we','41','aw')", con); int a=com.ExecuteNonQuery(); //OleDbCommand com = new OleDbCommand("SELECT * FROM DPMaster", con); //OleDbDataReader dr = com.ExecuteReader(); //while (dr.Read()) //{ // MessageBox.Show(dr[2].ToString()); //} MessageBox.Show(a.ToString()); } catch { MessageBox.Show("cannot"); } If I execute the commented block the application works.But the insert block doesnt works.Why I am unable to insert/update/delete the records into database? My Connection String is as follows: string strCon="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=xyz.mdb;Persist Security Info=True";

    Read the article

  • Adding linked table to Access 2003 while keeping ODBC connection info in MDB

    - by webworm
    I have an Access 2003 database MDB where all of the tables exist as linked tables within SQL Server 2005. The MDB file contains all of the ODBC information that points to the correct SQL Server and log-on credentials (trusted connection). What I would like to do is add a new linked table to the MDB file however I am not sure how to go about specifying the ODBC connection information. When I try to add a new linked table I keep getting prompted to locate or create a DSN file. I don't want to have to create a new DSN entry on every machine, rather I would like all that information stored within the Access MDB file itself. In the existing database I can "hover" over the table names and see the ODBC connection info as a tool-tip. All I need to do is add another linked table using the same connection information. I do have access to the SQL Server where the tables are linked to,. I have already created the new table I wanted to add. I just need to find a way to link to it.

    Read the article

  • Visual Studio Little Wonders: Quick Launch / Quick Access

    - by James Michael Hare
    Once again, in this series of posts I look at features of Visual Studio that may seem trivial, but can help improve your efficiency as a developer. The index of all my past little wonders posts can be found here. Well, my friends, this post will be a bit short because I’m in the middle of a bit of a move at the moment.  But, that said, I didn’t want to let the blog go completely silent this week, so I decided to add another Little Wonder to the list for the Visual Studio IDE. How often have you wanted to change an option or execute a command in Visual Studio, but can’t remember where the darn thing is in the menu, settings, etc.?  If so, Quick Launch in VS2012 (or Quick Access in VS2010 with the Productivity Power Tools extension) is just for you! Quick Launch / Quick Access – find a command or option quickly For those of you using Visual Studio 2012, Quick Launch is built right into the IDE at the top of the title bar, near the minimize, maximize, and close buttons: But do not despair if you are using Visual Studio 2010, you can get Quick Access from the Productivity Power Tools extension.  To do this, you can go to the extension manager: And then go to the gallery and search for Productivity Power Tools and install it.  If you don’t have VS2012 yet, then the Productivity Power Tools is the next best thing.  This extension updates VS2010 with features such as Quick Access, the Solution Navigator, searchable Add Reference Dialog, better tab wells, etc.  I highly recommend it! But back to the topic at hand!  In VS2012 Quick Launch is built into the IDE and can be accessed by clicking in the Quick Launch area of the title bar, or by pressing CTRL+Q.  If you have VS2010 with the PPT installed, though, it is called Quick Access and is accessible through View –> Quick Access: Regardless of which IDE you are using, the feature behaves mostly the same.  It allows you to search all of Visual Studio’s commands and options for a particular topic.  For example, let’s say you want to change from tabs to tabs expanded to spaces, but don’t remember where that option is buried.  You can bring up Quick Launch / Quick Access and type in “tabs”: And it brings up a list of all options on tabs, you can then choose the one appropriate to you and click on it and it will take you right there! A lot easier than diving through the options tree to find what you are looking for!  It also works on menu commands, for example if you can’t remember how to open the Output window: It shows you the menu items that will get you to the Output window, and (if applicable) the keyboard shortcuts.  Again, clicking on one of these will perform the action for you as well. There are also some tasks you can perform directly from Quick Launch / Quick Access.  For example, perhaps you are one of those people who like to have the line numbers in your editor (I do), so let’s bring up Quick Launch / Quick Access and type “line numbers”: And let’s select Turn Line Numbers On, and now our editor looks like: And Voila!  We have line numbers in VS2010.  You can do this in VS2012 too, but it takes you to the option settings instead of directly turning them off and on.  There are bound to be differences between the way the two editors organize settings and commands, but you get the point. So, as you can see, the Quick Launch / Quick Access feature in Visual Studio makes it easy to jump right to the options, commands, or tasks you are interested in without all the digging. Summary An IDE as powerful as Visual Studio has so many options and commands that it can be confusing to remember how to find and invoke them.  Quick Launch (Quick Access in VS2010 with Productivity Power Tools extension) is a quick and handy way to jump to any of these options, commands, or tasks quickly without having to remember in what menu or screen they are buried!  Technorati Tags: C#,CSharp,.NET,Little Wonders,Visual Studio,Quick Access,Quick Launch

    Read the article

  • "Access is denied" JavaScript error when trying to access the document object of a programmatically-

    - by Bungle
    I have project in which I need to create an <iframe> element using JavaScript and append it to the DOM. After that, I need to insert some content into the <iframe>. It's a widget that will be embedded in third-party websites. I don't set the "src" attribute of the <iframe> since I don't want to load a page; rather, it is used to isolate/sandbox the content that I insert into it so that I don't run into CSS or JavaScript conflicts with the parent page. I'm using JSONP to load some HTML content from a server and insert it in this <iframe>. I have this working fine, with one serious exception - if the document.domain property is set in the parent page (which it may be in certain environments in which this widget is deployed), Internet Explorer (probably all versions, but I've confirmed in 6, 7, and 8) gives me an "Access is denied" error when I try to access the document object of this <iframe> I've created. It doesn't happen in any other browsers I've tested in (all major modern ones). This makes some sense, since I'm aware that Internet Explorer requires you to set the document.domain of all windows/frames that will communicate with each other to the same value. However, I'm not aware of any way to set this value on a document that I can't access. Is anyone aware of a way to do this - somehow set the document.domain property of this dynamically created <iframe>? Or am I not looking at it from the right angle - is there another way to achieve what I'm going for without running into this problem? I do need to use an <iframe> in any case, as the isolated/sandboxed window is crucial to the functionality of this widget. Here's my test code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <title>Document.domain Test</title> <script type="text/javascript"> document.domain = 'onespot.com'; // set the page's document.domain </script> </head> <body> <p>This is a paragraph above the &lt;iframe&gt;.</p> <div id="placeholder"></div> <p>This is a paragraph below the &lt;iframe&gt;.</p> <script type="text/javascript"> var iframe = document.createElement('iframe'), doc; // create <iframe> element document.getElementById('placeholder').appendChild(iframe); // append <iframe> element to the placeholder element setTimeout(function() { // set a timeout to give browsers a chance to recognize the <iframe> doc = iframe.contentWindow || iframe.contentDocument; // get a handle on the <iframe> document alert(doc); if (doc.document) { // HEREIN LIES THE PROBLEM doc = doc.document; } doc.body.innerHTML = '<h1>Hello!</h1>'; // add an element }, 10); </script> </body> </html> I've hosted it at: http://troy.onespot.com/static/access_denied.html As you'll see if you load this page in IE, at the point that I call alert(), I do have a handle on the window object of the <iframe>; I just can't get any deeper, into its document object. Thanks very much for any help or suggestions! I'll be indebted to whomever can help me find a solution to this.

    Read the article

  • The action or event has been blocked by Disabled Mode

    - by mattruma
    I am using Microsoft Access 2007 to move and massage some data between two SQL Servers. Yesterday everything was working correctly, I was able to run queries, update data, and delete data. Today I opened up the Access database to finish my data migration and am now receiving the following message when I try to run some update queries: The action or event has been blocked by Disabled Mode. Any ideas what this is talking about?

    Read the article

  • Access denied when trying to access my database.

    - by Sergio Tapia
    Here's my code: <html> <head> </head> <body> <?php $user = mysql_real_escape_string($_GET["u"]); $pass = mysql_real_escape_string($_GET["p"]); $query = "SELECT * FROM usario WHERE username = '$user' AND password = '$pass'"; mysql_connect(localhost, "root", ""); @mysql_select_db("multas") or die( "Unable to select database"); $result=mysql_query($query); if(mysql_numrows($result) > 0){ echo 'si'; } ?> </body> </html> And here's the error I get when I try to run it Warning: mysql_real_escape_string() [function.mysql-real-escape-string]: Access denied for user 'ODBC'@'localhost' (using password: NO) in C:\xampp\htdocs\useraccess.php on line 7 Warning: mysql_real_escape_string() [function.mysql-real-escape-string]: A link to the server could not be established in C:\xampp\htdocs\useraccess.php on line 7 Warning: mysql_real_escape_string() [function.mysql-real-escape-string]: Access denied for user 'ODBC'@'localhost' (using password: NO) in C:\xampp\htdocs\useraccess.php on line 8 Warning: mysql_real_escape_string() [function.mysql-real-escape-string]: A link to the server could not be established in C:\xampp\htdocs\useraccess.php on line 8 Warning: mysql_numrows() expects parameter 1 to be resource, boolean given in C:\xampp\htdocs\useraccess.php on line 16

    Read the article

  • Delphi 2010 Professional and remote database access

    - by Kico Lobo
    Hi, When looking for which version of Delphi 2010 to buy, we found the following limitation on the professional one: Delphi 2010 Professional is designed for developers building high-performance desktop GUI and touch-screen applications with (or without) embedded and local database persistence. What does this really mean? Does this mean that we'll only face this restriction if we choose to use the native vcl components for database access we'll face this restriction. And what if we choose to use ADO components instead of those? In this case, how can Delphi avoid us to access remote database servers? Did anyone here ever tried this? Going even further: if we choose to use a database like Firebird, which is just one file, and used a network mapped drive. Could we be facing the same limitation? Supposing we opt for ADO, what will be the main consequences?

    Read the article

  • ASP.NET MVC2 Data Access Layer

    - by Paul
    For a small/medium sized project I'm trying to figure out what is the 'ideal' way to have a domain layer and data access layer. My opinions on coupling tend to be more towards the view that the domain models should not be tightly coupled with the database layer, in other words the data access layer shouldn't actually know anything about the domain objects. I've been looking at Linq-to-sql and it wants to use its own models that it creates, and so it ends up VERY tightly coupled. Whilst I love the way you use linq-to-sql in code I really don't like the way it wants to make its own domain objects. What are some alternatives that I should consider? I tried use NHibernate but I did not like the way I had to use to query and get different objects. I honestly love the syntax and way you use linq, I just don't want it to be so tightly coupled to domain objects.

    Read the article

  • Removing non-alphanumeric characters in an Access Field.

    - by Jacques Tardie
    I need to remove hyphens from a string in a large number of access fields. What's the best way to go about doing this? Currently, the entries are follow this general format: 2010-54-1 2010-56-1 etc. I'm trying to run append queries off of this field, but I'm always getting validation errors causing the query to fail. I think the cause of this failure is the hypens in the entries, which is why I need to remove them. I've googled, and I see that there are a number of formatting guides using vbscript, but I'm not sure how I can integrate vb into Access. It's new to me :) Thanks in advance, Jacques

    Read the article

  • cross domain access in iframe from parent to child

    - by Aparna
    Hi, Could someone please help me with this- I've 2 applications AAA and BBB. The homepage of AAA contains an iFrame which displays the application BBB. When I login to AAA, the same login details should be used to login to BBB(single signon) and on pageload of the homepage of AAA, homepage of BBB should also be loaded in the iFrame. I tried to use javascript to access the form elements of login page of BBB to enter the login data and submit. But the browser gives me a 'Access is denied' error. I did a little reading and came to know that cross- domain communication is not allowed by the browser. Could someone tell me how i can go about achieving this?

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >