Search Results

Search found 54087 results on 2164 pages for 'device name'.

Page 26/2164 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

  - by Jason Tan

  Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

  Read the article

• Cannot open root device xvda1 or unknown-block(0,0)

  - by svoop

  I'm putting together a Dom0 and three DomU (all Gentoo) with kernel 3.5.7 and Xen 4.1.1. Each Dom has it's own md (md0 for Dom0, md1 for Dom1 etc). Dom0 works fine so far, however, I'm stuck trying to create DomUs. It appears the xvda1 device on DomU is not created or accessible: Parsing config file dom1 domainbuilder: detail: xc_dom_allocate: cmdline="root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3", features="(null)" domainbuilder: detail: xc_dom_kernel_mem: called domainbuilder: detail: xc_dom_boot_xen_init: ver 4.1, caps xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 domainbuilder: detail: xc_dom_parse_image: called domainbuilder: detail: xc_dom_find_loader: trying multiboot-binary loader ... domainbuilder: detail: loader probe failed domainbuilder: detail: xc_dom_find_loader: trying Linux bzImage loader ... domainbuilder: detail: xc_dom_malloc : 10530 kB domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0x2f7a4f -> 0xa48888 domainbuilder: detail: loader probe OK xc: detail: elf_parse_binary: phdr: paddr=0x1000000 memsz=0x558000 xc: detail: elf_parse_binary: phdr: paddr=0x1558000 memsz=0x690e8 xc: detail: elf_parse_binary: phdr: paddr=0x15c2000 memsz=0x127c0 xc: detail: elf_parse_binary: phdr: paddr=0x15d5000 memsz=0x533000 xc: detail: elf_parse_binary: memory: 0x1000000 -> 0x1b08000 xc: detail: elf_xen_parse_note: GUEST_OS = "linux" xc: detail: elf_xen_parse_note: GUEST_VERSION = "2.6" xc: detail: elf_xen_parse_note: XEN_VERSION = "xen-3.0" xc: detail: elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 xc: detail: elf_xen_parse_note: ENTRY = 0xffffffff815d5210 xc: detail: elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 xc: detail: elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" xc: detail: elf_xen_parse_note: PAE_MODE = "yes" xc: detail: elf_xen_parse_note: LOADER = "generic" xc: detail: elf_xen_parse_note: unknown xen elf note (0xd) xc: detail: elf_xen_parse_note: SUSPEND_CANCEL = 0x1 xc: detail: elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 xc: detail: elf_xen_parse_note: PADDR_OFFSET = 0x0 xc: detail: elf_xen_addr_calc_check: addresses: xc: detail: virt_base = 0xffffffff80000000 xc: detail: elf_paddr_offset = 0x0 xc: detail: virt_offset = 0xffffffff80000000 xc: detail: virt_kstart = 0xffffffff81000000 xc: detail: virt_kend = 0xffffffff81b08000 xc: detail: virt_entry = 0xffffffff815d5210 xc: detail: p2m_base = 0xffffffffffffffff domainbuilder: detail: xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff81000000 -> 0xffffffff81b08000 domainbuilder: detail: xc_dom_mem_init: mem 5000 MB, pages 0x138800 pages, 4k each domainbuilder: detail: xc_dom_mem_init: 0x138800 pages domainbuilder: detail: xc_dom_boot_mem_init: called domainbuilder: detail: x86_compat: guest xen-3.0-x86_64, address size 64 domainbuilder: detail: xc_dom_malloc : 10000 kB domainbuilder: detail: xc_dom_build_image: called domainbuilder: detail: xc_dom_alloc_segment: kernel : 0xffffffff81000000 -> 0xffffffff81b08000 (pfn 0x1000 + 0xb08 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0xb08 at 0x7fdec9b85000 xc: detail: elf_load_binary: phdr 0 at 0x0x7fdec9b85000 -> 0x0x7fdeca0dd000 xc: detail: elf_load_binary: phdr 1 at 0x0x7fdeca0dd000 -> 0x0x7fdeca1460e8 xc: detail: elf_load_binary: phdr 2 at 0x0x7fdeca147000 -> 0x0x7fdeca1597c0 xc: detail: elf_load_binary: phdr 3 at 0x0x7fdeca15a000 -> 0x0x7fdeca1cd000 domainbuilder: detail: xc_dom_alloc_segment: phys2mach : 0xffffffff81b08000 -> 0xffffffff824cc000 (pfn 0x1b08 + 0x9c4 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1b08+0x9c4 at 0x7fdec91c1000 domainbuilder: detail: xc_dom_alloc_page : start info : 0xffffffff824cc000 (pfn 0x24cc) domainbuilder: detail: xc_dom_alloc_page : xenstore : 0xffffffff824cd000 (pfn 0x24cd) domainbuilder: detail: xc_dom_alloc_page : console : 0xffffffff824ce000 (pfn 0x24ce) domainbuilder: detail: nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) domainbuilder: detail: xc_dom_alloc_segment: page tables : 0xffffffff824cf000 -> 0xffffffff824e6000 (pfn 0x24cf + 0x17 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x24cf+0x17 at 0x7fdece676000 domainbuilder: detail: xc_dom_alloc_page : boot stack : 0xffffffff824e6000 (pfn 0x24e6) domainbuilder: detail: xc_dom_build_image : virt_alloc_end : 0xffffffff824e7000 domainbuilder: detail: xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 domainbuilder: detail: xc_dom_boot_image: called domainbuilder: detail: arch_setup_bootearly: doing nothing domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_32p domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32 domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32p domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_64 domainbuilder: detail: xc_dom_update_guest_p2m: dst 64bit, pages 0x138800 domainbuilder: detail: clear_page: pfn 0x24ce, mfn 0x37ddee domainbuilder: detail: clear_page: pfn 0x24cd, mfn 0x37ddef domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x24cc+0x1 at 0x7fdece675000 domainbuilder: detail: start_info_x86_64: called domainbuilder: detail: setup_hypercall_page: vaddr=0xffffffff81001000 pfn=0x1001 domainbuilder: detail: domain builder memory footprint domainbuilder: detail: allocated domainbuilder: detail: malloc : 20658 kB domainbuilder: detail: anon mmap : 0 bytes domainbuilder: detail: mapped domainbuilder: detail: file mmap : 0 bytes domainbuilder: detail: domU mmap : 21392 kB domainbuilder: detail: arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xbaa6f domainbuilder: detail: shared_info_x86_64: called domainbuilder: detail: vcpu_x86_64: called domainbuilder: detail: vcpu_x86_64: cr3: pfn 0x24cf mfn 0x37dded domainbuilder: detail: launch_vm: called, ctxt=0x7fff224e4ea0 domainbuilder: detail: xc_dom_release: called Daemon running with PID 4639 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.7-gentoo (root@majordomo) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Tue Nov 20 10:49:51 CET 2012 [ 0.000000] Command line: root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3 [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000138ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] MPS support code is not built-in. [ 0.000000] Using acpi=off or acpi=noirq or pci=noacpi may have problem [ 0.000000] DMI not present or invalid. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x139000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x100000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xffffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x138ffffff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000138ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x138ffffff] [ 0.000000] NODE_DATA [mem 0x1387fc000-0x1387fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x138ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x138ffffff] [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] e820: cannot find a gap in the 32bit address range [ 0.000000] e820: PCI devices with unassigned 32bit BARs may break! [ 0.000000] e820: [mem 0x139100000-0x1394fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880138400000 s75712 r8192 d22592 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1259871 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4943980k/5128192k available (3937k kernel code, 448k absent, 183764k reserved, 1951k data, 524k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 3411.602 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.20 BogoMIPS (lpj=3411602) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.001355] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002974] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003441] Mount-cache hash table entries: 256 [ 0.003595] Initializing cgroup subsys cpuacct [ 0.003599] Initializing cgroup subsys freezer [ 0.003637] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003637] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003643] CPU: Physical Processor ID: 0 [ 0.003645] CPU: Processor Core ID: 0 [ 0.003702] SMP alternatives: switching to UP code [ 0.011791] Freeing SMP alternatives: 12k freed [ 0.011835] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.011886] Brought up 1 CPUs [ 0.011998] Grant tables using version 2 layout. [ 0.012009] Grant table initialized [ 0.012034] NET: Registered protocol family 16 [ 0.012328] PCI: setting up Xen PCI frontend stub [ 0.015089] bio: create slab <bio-0> at 0 [ 0.015158] ACPI: Interpreter disabled. [ 0.015180] xen/balloon: Initialising balloon driver. [ 0.015180] xen-balloon: Initialising balloon driver. [ 0.015180] vgaarb: loaded [ 0.016126] SCSI subsystem initialized [ 0.016314] PCI: System does not support PCI [ 0.016320] PCI: System does not support PCI [ 0.016435] NetLabel: Initializing [ 0.016438] NetLabel: domain hash size = 128 [ 0.016440] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.016447] NetLabel: unlabeled traffic allowed by default [ 0.016475] Switching to clocksource xen [ 0.017434] pnp: PnP ACPI: disabled [ 0.017501] NET: Registered protocol family 2 [ 0.017864] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.019322] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.020376] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.020497] TCP: Hash tables configured (established 524288 bind 65536) [ 0.020500] TCP: reno registered [ 0.020525] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.020564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.020624] NET: Registered protocol family 1 [ 0.020658] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.020662] software IO TLB [mem 0xfb632000-0xff631fff] (64MB) mapped at [ffff8800fb632000-ffff8800ff631fff] [ 0.020750] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.021378] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.023378] msgmni has been set to 9656 [ 0.023544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.023549] io scheduler noop registered [ 0.023551] io scheduler deadline registered [ 0.023580] io scheduler cfq registered (default) [ 0.023650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.023845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.024082] Non-volatile memory driver v1.3 [ 0.024085] Linux agpgart interface v0.103 [ 0.024207] Event-channel device installed. [ 0.024265] [drm] Initialized drm 1.1.0 20060810 [ 0.024268] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 0.025145] brd: module loaded [ 0.025565] loop: module loaded [ 0.045646] Initialising Xen virtual ethernet driver. [ 0.198264] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.199096] i8042: No controller found [ 0.199139] mousedev: PS/2 mouse device common for all mice [ 0.259303] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.259353] rtc_cmos: probe of rtc_cmos failed with error -38 [ 0.259440] md: raid1 personality registered for level 1 [ 0.259542] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.259732] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.259747] TCP: cubic registered [ 0.259886] NET: Registered protocol family 10 [ 0.260031] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.260070] sit: IPv6 over IPv4 tunneling driver [ 0.260194] NET: Registered protocol family 17 [ 0.260213] Bridge firewalling registered [ 5.360075] XENBUS: Waiting for devices to initialise: 25s...20s...15s...10s...5s...0s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s... [ 270.360180] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) [ 270.360273] md: Waiting for all devices to be available before autodetect [ 270.360277] md: If you don't use raid, use raid=noautodetect [ 270.360388] md: Autodetecting RAID arrays. [ 270.360392] md: Scanned 0 and added 0 devices. [ 270.360394] md: autorun ... [ 270.360395] md: ... autorun DONE. [ 270.360431] VFS: Cannot open root device "xvda1" or unknown-block(0,0): error -6 [ 270.360435] Please append a correct "root=" boot option; here are the available partitions: [ 270.360440] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 270.360444] Pid: 1, comm: swapper/0 Not tainted 3.5.7-gentoo #1 [ 270.360446] Call Trace: [ 270.360454] [<ffffffff813d2205>] ? panic+0xbe/0x1c5 [ 270.360459] [<ffffffff813d2358>] ? printk+0x4c/0x51 [ 270.360464] [<ffffffff815d5fb7>] ? mount_block_root+0x24f/0x26d [ 270.360469] [<ffffffff815d62b6>] ? prepare_namespace+0x168/0x192 [ 270.360474] [<ffffffff815d5ca7>] ? kernel_init+0x1b0/0x1c2 [ 270.360477] [<ffffffff815d5500>] ? loglevel+0x34/0x34 [ 270.360482] [<ffffffff813d5a64>] ? kernel_thread_helper+0x4/0x10 [ 270.360486] [<ffffffff813d4038>] ? retint_restore_args+0x5/0x6 [ 270.360490] [<ffffffff813d5a60>] ? gs_change+0x13/0x13 The config: name = "dom1" bootloader = "/usr/bin/pygrub" root = "/dev/xvda1 ro" extra = "3" # runlevel memory = 5000 disk = [ 'phy:/dev/md1,xvda1,w' ] # vif = [ 'ip=..., vifname=veth1' ] # none for now Here are some details on the Dom0 kernel (grepping for "xen"): CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y # CONFIG_XEN_BLKDEV_FRONTEND is not set CONFIG_XEN_BLKDEV_BACKEND=y # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_XEN_NETDEV_BACKEND=y CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # Xen driver support CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PCIDEV_BACKEND=m CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m And the DomU kernel (grepping for "xen"): CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_XEN_NETDEV_FRONTEND=y CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # Xen driver support CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y # CONFIG_XEN_BACKEND is not set CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m Any ideas what I'm doing wrong here? Thanks a lot!

  Read the article

• How to Protect your Domain Name

  Protecting your domain name is just like protecting your fuel tank. The tank is responsible for running the vehicle and similarly, the domain name is accountable for running the website smoothly. The... [Author: John Anthony - Web Design and Development - March 30, 2010]

  Read the article

• Selecting a Website Name

  When selecting a website name it is important to choose wisely. You want to use keywords of your business name.

  Read the article

• Name user object and user table correctly

  - by Marc

  It's maybe simple but I think about this every time I build a new application. How do you name the class for the current user of the application and for the orm class of the user table? Usually I have something like CurrentUser: Logged-in user, stored in session, info for last activity etc User: ORM Class (C# EF CodeFirst, but it doesn't matter) And yes, they could have the same name in different namespaces, but I don't really like that.

  Read the article

• Programmatically Getting Name of Front-most (currently running) application in Unity

  - by NHDaly

  I am trying to write a script that executes differently depending on the currently active program, and I am wondering if there is any way to find this programatically. For example, I come from the Mac world, and in Apple's Applescript you can do the following: set appPath to the path to the frontmost application set appName to the name of file appPath and that will give you the name of the currently running application. Is there anything similar that I can do in ubuntu-land? Thanks!

  Read the article

• How to make google get to know my domain name [closed]

  - by Milosh Belter

  Possible Duplicate: I cannot see my website in google I have a strange problem with my website. I have a website, let's say Abcdefg.com. Website is live for 2 months and google still doesn't know it. While searching for my domain name 'abcdefg', google displays results for similar phrase (abcdef) but not fot mine. How to make google get to know my domain name? Website and sitemaps have been submitted via Google Webmaster Tools.

  Read the article

• Your Domain Name is Your Best Asset - Choose it Wisely

  Do you want to know what your most important asset is as an online marketer? Your domain name. It doesn';t matter whether you have a blog or a sales page for your product your domain name can make or ... [Author: Clare Swindlehurst - Web Design and Development - April 28, 2010]

  Read the article

• Choosing an Effective Domain Name

  Choosing a good domain name is important. Whether it is going to be you central site or a site that you want to monetize, your domain name is going to determine some of the course of your business.

  Read the article

• Search Engine Optimisation (SEO) Tips - Selecting a Proper Domain Name & Hosting Company

  The domain name selection cannot be considered as the most important factor but every small entities count end of the day. The domain name should be created in such a way that it clearly expresses the purpose of the Website.

  Read the article

• How to get smartcard reader name in Windows 7 using C#?

  - by AndrejaKo

  Hi! I'm trying to make a C# program which will use a C .dll (unfortunately, the .dll doesn't have good documentation) to access a smart card. One of the functions of the .dll uses name of the reader as argument. My problem is that I don't know how to get the name. After looking for answers I found something similar to what I need in an example here: http://msdn.microsoft.com/en-us/library/aa379803%28VS.85%29.aspx I'm looking for a way to get szReader value as described in the aforementioned example using C#. Can anyone help me or at least point me in the right direction?

  Read the article

• c# - How do you get a variable's name as it was physically typed in its declaration?

  - by Petras

  The class below contains the field city. I need to dynamically determine the field's name as it is typed in the class declaration i.e. I need to get the string "city" from an instance of the object city. I have tried to do this by examining its Type in DoSomething() but can't find it when examining the contents of the Type in the debugger. Is it possible? public class Person { public string city = "New York"; public Person() { } public void DoSomething() { Type t = city.GetType(); string field_name = t.SomeUnkownFunction(); //would return the string "city" if it existed! } } Some people in their answers below have asked me why I want to do this. Here's why. In my real world situation, there is a custom attribute above city. [MyCustomAttribute("param1", "param2", etc)] public string city = "New York"; I need this attribute in other code. To get the attribute, I use reflection. And in the reflection code I need to type the string "city" MyCustomAttribute attr; Type t = typeof(Person); foreach (FieldInfo field in t.GetFields()) { if (field.Name == "city") { //do stuff when we find the field that has the attribute we need } } Now this isn't type safe. If I changed the variable "city" to "workCity" in my field declaration in Person this line would fail unless I knew to update the string if (field.Name == "workCity") //I have to make this change in another file for this to still work, yuk! { } So I am trying to find some way to pass the string to this code without physically typing it. Yes, I could declare it as a string constant in Person (or something like that) but that would still be typing it twice. Phew! That was tough to explain!! Thanks Thanks to all who answered this * a lot*. It sent me on a new path to better understand lambda expressions. And it created a new question.

  Read the article

• Fixing a typo in machine name

  - by justSteve

  When i installed windows i had a typo in the machine name that i corrected from the system's 'Computer Name/Domain Changes' - the workstation is a member of a workgroup not a domain. From everything i can see the renamed machine name is correct. Shift gears.... I'm importing SQL logins from my remote server to this, my development workstation and have used the script presented here - a script that generates a CREATE statement for each login found. While I was preparing to run this script's output (from the remote box) i needed to change the domain name from the remote to my local's name - so i ran the same script locally (in order to see what SQL things my domain name is. SQL has the original machine name - the one with the typo. However, the scripts are tossing errors if i try to create logins with that identifier. CREATE LOGIN [Setve\Admin] FROM WINDOWS WITH DEFAULT_DATABASE = [master] But works correctly if i use the updated machine name: CREATE LOGIN [Steve\Admin] FROM WINDOWS WITH DEFAULT_DATABASE = [master] So the problem is: do i have a problem i need to solve? Somewhere, deep in the guts of SQL Server, it has record of a Domain name that does not exist. Should i find and fix that discrepancy? thx

  Read the article

• A Rose by Any Other Name..

  - by Geoff N. Hiten

  It is always a good start when you can steal a title line from one of the best writers in the English language.  Let’s hope I can make the rest of this post live up to the opening.  One recurring problem with SQL server is moving databases to new servers.  Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>.  If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple.  You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address.  The other creates a new alias for the old server, since the original system name is now redirected.  Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts.    Figure 1 – Microsoft DNS MMC Snap-In   Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand.  That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated.  The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection.  This can be a pain installing and configuring the app on multiple client servers.  The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys.  Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key.  If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key.  If you do this repeatedly, you can simply edit an existing registry file.  Create the entry using the SQL Configuration Manager.  You must use a 64-bit system to create the WoW key.  The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”.   Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again.  SQL Server Management Server is a 32-bit app, as are most SQL test utilities.  Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location:  HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo.  You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”.  Save with an appropriate name and location.  The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported.  In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file.  Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy.  To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server.  The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

  Read the article

• WebLogic Server JMS WLST Script – Who is Connected To My Server

  - by james.bayer

  Ever want to know who was connected to your WebLogic Server instance for troubleshooting?  An email exchange about this topic and JMS came up this week, and I’ve heard it come up once or twice before too.  Sometimes it’s interesting or helpful to know the list of JMS clients (IP Addresses, JMS Destinations, message counts) that are connected to a particular JMS server.  This can be helpful for troubleshooting.  Tom Barnes from the WebLogic Server JMS team provided some helpful advice: The JMS connection runtime mbean has “getHostAddress”, which returns the host address of the connecting client JVM as a string.  A connection runtime can contain session runtimes, which in turn can contain consumer runtimes.  The consumer runtime, in turn has a “getDestinationName” and “getMemberDestinationName”.  I think that this means you could write a WLST script, for example, to dump all consumers, their destinations, plus their parent session’s parent connection’s host addresses.    Note that the client runtime mbeans (connection, session, and consumer) won’t necessarily be hosted on the same JVM as a destination that’s in the same cluster (client messages route from their connection host to their ultimate destination in the same cluster). Writing the Script So armed with this information, I decided to take the challenge and see if I could write a WLST script to do this.  It’s always helpful to have the WebLogic Server MBean Reference handy for activities like this.  This one is focused on JMS Consumers and I only took a subset of the information available, but it could be modified easily to do Producers.  I haven’t tried this on a more complex environment, but it works in my simple sandbox case, so it should give you the general idea. # Better to use Secure Config File approach for login as shown here http://buttso.blogspot.com/2011/02/using-secure-config-files-with-weblogic.html connect('weblogic','welcome1','t3://localhost:7001')   # Navigate to the Server Runtime and get the Server Name serverRuntime() serverName = cmo.getName()   # Multiple JMS Servers could be hosted by a single WLS server cd('JMSRuntime/' + serverName + '.jms' ) jmsServers=cmo.getJMSServers()   # Find the list of all JMSServers for this server namesOfJMSServers = '' for jmsServer in jmsServers: namesOfJMSServers = jmsServer.getName() + ' '   # Count the number of connections jmsConnections=cmo.getConnections() print str(len(jmsConnections)) + ' JMS Connections found for ' + serverName + ' with JMSServers ' + namesOfJMSServers   # Recurse the MBean tree for each connection and pull out some information about consumers for jmsConnection in jmsConnections: try: print 'JMS Connection:' print ' Host Address = ' + jmsConnection.getHostAddress() print ' ClientID = ' + str( jmsConnection.getClientID() ) print ' Sessions Current = ' + str( jmsConnection.getSessionsCurrentCount() ) jmsSessions = jmsConnection.getSessions() for jmsSession in jmsSessions: jmsConsumers = jmsSession.getConsumers() for jmsConsumer in jmsConsumers: print ' Consumer:' print ' Name = ' + jmsConsumer.getName() print ' Messages Received = ' + str(jmsConsumer.getMessagesReceivedCount()) print ' Member Destination Name = ' + jmsConsumer.getMemberDestinationName() except: print 'Error retrieving JMS Consumer Information' dumpStack() # Cleanup disconnect() exit() Example Output I expect the output to look something like this and loop through all the connections, this is just the first one: 1 JMS Connections found for AdminServer with JMSServers myJMSServer JMS Connection:   Host Address = 127.0.0.1   ClientID = None   Sessions Current = 16    Consumer:      Name = consumer40      Messages Received = 1      Member Destination Name = myJMSModule!myQueue Notice that it has the IP Address of the client.  There are 16 Sessions open because I’m using an MDB, which defaults to 16 connections, so this matches what I expect.  Let’s see what the full output actually looks like: D:\Oracle\fmw11gr1ps3\user_projects\domains\offline_domain>java weblogic.WLST d:\temp\jms.py   Initializing WebLogic Scripting Tool (WLST) ...   Welcome to WebLogic Server Administration Scripting Shell   Type help() for help on available commands   Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'offline_domain'.   Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.   Location changed to serverRuntime tree. This is a read-only tree with ServerRuntimeMBean as the root. For more help, use help(serverRuntime)   1 JMS Connections found for AdminServer with JMSServers myJMSServer JMS Connection: Host Address = 127.0.0.1 ClientID = None Sessions Current = 16 Consumer: Name = consumer40 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer34 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer37 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer16 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer46 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer49 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer43 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer55 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer25 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer22 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer19 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer52 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer31 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer58 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer28 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer61 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Disconnected from weblogic server: AdminServer     Exiting WebLogic Scripting Tool. Thanks to Tom Barnes for the hints and the inspiration to write this up. Image of telephone switchboard courtesy of http://www.JoeTourist.net/ JoeTourist InfoSystems

  Read the article

• No device file for partition on logical volume (Linux LVM)

  - by Brian

  I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

  Read the article

• ISP 5 Device Limit ... again

  - by Tommo

  Sorry for the delay in responding to the suggestions that were posted in my first question (ISP 5 Device Limit - double NAT the solution?). I've been travelling and have not been able to try anything. Below is what I've tried and where I have not been successful. Any more help gratefully appreciated. I figure I need to give a more comprehensive overview of what I've got and how it's set up. First of all - I am using all Apple products here. I am iMac, iPad, iPhone, Apple TV, Airport Express and Time Capsule. I used to like the way that it 'just worked'. Now I find that it requires a bit of encouragement before it 'just works'. So, as I stated in my original question; my ISP has a router in my building that is limiting me to 5 devices. I am hard wired into this router and I can neither access it physically nor logically (they won't let me access it). Also, I only appear to be able to connect to it through the LAN ports on my Time Capsule. Any device I connect appears to be on a rolling IP list with the following settings: Router 91.72.80.1 Devices then get assigned IPv4 addresses in the range (as far as I can see) from 91.72.80.2 onwards. SubNet Mask 255.255.255.0 DNS Servers 213.132.63.25, 80.227.2.4 I have my Time Capsule / Router in Bridge-Mode which means I am limited to the 5 devices and cannot use Guest Networks etc. What I've tried today. Static IPs: On all devices, I went from DHCP to Static and put in the same information when they had connected using DHCP. Somewhat surprisingly this did not work. None of the devices enjoyed any connection to the router and certainly no internet connection. Intentional Double-NAT - Time Capsule to 'DHCP and NAT': By selecting DHCP and NAT on my Router I was able to connect devices to my Time Capsule in the range 10.0.1.2 to 10.0.1.200. This offered no internet connectivity and didn't really help the situation. In this mode, however, I was able to force the devices - individually and laboriously - to look for the Router and previously listed DNSs by inputting the numbers from 'Bridge-mode' into the STATIC settings and then resetting the connection. The Router then appeared to assign a distinct IP address to the device and it worked on the network. I had this working for more than 5 devices. However, this is not a great solution because as soon as one of the mobile devices left the building it needed repointing to the Router. The connections were also not very stable. Especially when trying to hold onto a VPN. Spoofing a few MAC addresses: I'm afraid I don't really know what this would achieve, nor how to do it on an Apple device… So … I'm almost back at Square One. I have had to withdraw to the Bridge-Mode position again with the 5 device limit to see if there's a better course of action to follow. ANY help would be much appreciated. I am positive that I cannot be the only one suffering under this 5 device limit!

  Read the article

• Windows DHCP Server - get notification when a non-AD joined device gets an IP address

  - by TheCleaner

  SCENARIO To simplify this down to it's easiest example: I have a Windows 2008 R2 standard DC with the DHCP server role. It hands out IPs via various IPv4 scopes, no problem there. WHAT I'D LIKE I would like a way to create a notification/eventlog entry/similar whenever a device gets a DHCP address lease and that device IS NOT a domain joined computer in Active Directory. It doesn't matter to me whether it is custom Powershell, etc. Bottom line = I'd like a way to know when non-domain devices are on the network without using 802.1X at the moment. I know this won't account for static IP devices. I do have monitoring software that will scan the network and find devices, but it isn't quite this granular in detail. RESEARCH DONE/OPTIONS CONSIDERED I don't see any such possibilities with the built in logging. Yes, I'm aware of 802.1X and have the ability to implement it long-term at this location but we are some time away from a project like that, and while that would solve network authentication issues, this is still helpful to me outside of 802.1X goals. I've looked around for some script bits, etc. that might prove useful but the things I'm finding lead me to believe that my google-fu is failing me at the moment. I believe the below logic is sound (assuming there isn't some existing solution): Device receives DHCP address Event log entry is recorded (event ID 10 in the DHCP audit log should work (since a new lease is what I'd be most interested in, not renewals): http://technet.microsoft.com/en-us/library/dd759178.aspx) At this point a script of some kind would probably have to take over for the remaining "STEPS" below. Somehow query this DHCP log for these event ID 10's (I would love push, but I'm guessing pull is the only recourse here) Parse the query for the name of the device being assigned the new lease Query AD for the device's name IF not found in AD, send a notification email If anyone has any ideas on how to properly do this, I'd really appreciate it. I'm not looking for a "gimme the codez" but would love to know if there are alternatives to the above list or if I'm not thinking clear and another method exists for gathering this information. If you have code snippets/PS commands you'd like to share to help accomplish this, all the better.

  Read the article

• Name disappeared from main menu bar

  - by Anthony Burman

  I have Ubuntu 10.4. I installed a nvidia gigabyte geforce 210 graphic card because the intel graphic card is a disaster. I use a terminal and basic, fiddly adjustments were successfully made to get the window to fit the screen. The new card is a roaring success. Nothing freezes and visuals can be set to Extra. But, from that point on, my main menu bar misbehaved and icons kept disappearing. Logon and logoff usually helped. R-E-I-S-U-B was needed when the actual logoff icon disappeared. My full name, Anthony Burman, appeared in the main menu bar. It was alonside Wanda, the Fish , the Oracle.... My name disappeared and I cannot get it back. It can't be found anywhere in the 'add to panel' section. Indicator applet session also can't bring it back. How do i re-insert my name on the toolbar? Thanks, Ant.

  Read the article

• Is “Application Programming Interface” a bad name?

  - by Taylor Hawkes

  Application programming interface seems like a bad name for what it is. Is there a reason it was named such? I understand that people used to call them Advanced Programming Interfaces and then renamed to Application Programming Interface. Is that why it is poorly named? Why is it not named Application (to) Programmer Interface. I guess I'm just confused of the meaning behind that name? I write more about my confusion around the name here: BREAKING DOWN THE WORD “APPLICATION PROGRAMMING INTERFACE” This is a very confusing word. We mostly understand what the word Interface means, but “Application Programming”, what even is that. Honestly I'm confused. Is that suppose to be two words like “Application”, “Programming” and then the “Interface” is suppose to mean between the two? Like would a “Computer Human Interface” be an interface between a “Computer” and a “Human” (monitor , keyboard, mouse ) or is a “Computer Human” a real thing - perhaps the terminator. So a CHI is our boy Kyle Reese who is the only way we are able to work with the computer human. I think more likely “Application Programming Interface” was simply poorly named and doesn't really make sense. It was originally called an “Advanced Programming Interface” , but perhaps being a bit to ostentatious merged into the now wildly accepted “Application Programming Interface”. So now, not wanting to change an acronym has confused the living heck out everyone.... Any thoughts or clarification would be great, I'm giving a lecture on this topic in a month, so I would prefer not to BS my way through it.

  Read the article

• SEO impact on subdomain for full name and obscure ccTLD

  - by Dan Christian

  There have been a few questions on subdomains and their impact on SEO, mostly in comparison to subfolders. The closest question I've found is this question but it still doesn't completely answer my query. I'm setting up a blog for 'Sam Smith'. It's imperative the SEO is based around his full name as he is a prominent blogger and his name is his value. All ccTLD variations of 'samsmith' (samsmith.com, samsmith.cc etc) are taken. However there has been the opportunity to register an obscure ccTLD for 'smith'. In regards to SEO value purely from the URL... 1) Will there be any negative SEO implications on searches for 'Sam Smith' when setting up the subdomain as 'sam.smith.' compared to a more regular 'samsmith.' domain? Will a search engine recognise the subdomain as the full name as oppose to just 'smith'? 2) Are there any negative SEO implications with an obscure ccTLD. For instance if Sam Smith was a prominent blogger in Canada with most of his audience based there, would there be any negative SEO if he had, for example, a .co ccTLD.

  Read the article

• Name for Osherove's modified singleton pattern?

  - by Kazark

  I'm pretty well sold on the "singletons are evil" line of thought. Nevertheless, there are limited occurrences when you want to limit the creation of an object. Roy Osherove advises, If you're planning to use a singleton in your design, separate the logic of the singleton class and the logic that makes it a singleton (the part that initializes a static variables, for example) into two separate classes. That way, you can keep the single responsibility principle (SRP) and also have a way to override singleton logic. (The Art of Unit Testing 261-262) This pattern still perpetuates the global state. However, it does result in a testable design, so it seems to me to be a good pattern for mitigating the damage of a singleton. However, Osherove does not give a name to this pattern; but naming a pattern, according to the Gang of Four, is important: Naming a pattern immediately increases our design vocabulary. It lets us design at a higher level of abstraction. (3) Is there a standard name for this pattern? It seems different enough from a standard singleton to deserve a separate name. Decoupled Singleton, perhaps?

  Read the article

• Changing domain name - what are the practical steps involved

  - by Homunculus Reticulli

  I launched a website a couple of years ago, bright eyed and bushy tailed, with dreams of conquering the world. Unfortunately it wasn't to be. Now, that I am a bit older and wiser, I have spent some money on branding and creating more quality content etc, I am rebranding and relaunching the site with a new domain name. Although the traffic on the old site is laughable (i.e. non-existent), there are a few pages of good information on there and I don't want to lose any "juice" those pages may have gained because web crawlers have been seeing it for a few years now. Ok, the upshot of all that is this: I want to change my domain name from xyz.com to abc.com. I am maintaining the same friendly urls I had before, only the domanin name part of the url will change, so that any traffic coming to the old page will be forwarded/redirected? to the new page seamlessly. How do I go about achieving this (i.e. what are the steps I need to carry out, and to minimize any "disruption" to any credibility the existing site has with Googlebot etc? I am running Apache 2.x on a headless Linux (Ubuntu) server.

  Read the article

• How To Figure Out Your PC’s Host Name From the Command Prompt

  - by The Geek

  If you’re doing any work with networking, you probably need to know the name of your computer. Rather than diving into Control Panel, there’s a really simple way to do this from the command prompt. Note: If you haven’t already, be sure to read our complete guide to networking Windows 7 with XP and Vista. To see the hostname… all you have to do is type hostname at the command prompt. Go figure, eh? The same thing works in Linux or OS X, though you can see that most of the time the hostname is part of the prompt anyway. Note: you can also change the hostname by simply typing “hostname <newhostname>”. Of course, the easiest way to see your computer name in Windows is to just hit the Win+Break key combination, which will pop up the System pane from Control Panel.   If you want to change it instead, you can always change your computer name easily through Control Panel. Similar Articles Productive Geek Tips MySql: Give Root User Logon Permission From Any HostUse "Command Prompt Here" in Windows VistaKeyboard Ninja: Scrolling the Windows Command Prompt With Only the KeyboardVerify the Integrity of Windows Vista System FilesFind Path of Application Running on Solaris, Ubuntu, Suse or Redhat Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Should I use my real name in my open source project?

  - by Jardo

  I developed a few freeware programs in the past which I had signed with my pseudonym Jardo. I'm now planning to release my first open source project and was thinking of using my full real name in the project files (as the "author"). I thought it would be good to use my name as my "trademark" so if someone (perhaps a future headhunter) googles my name, they'll find my projects. But on the other side, I feel a bit paranoid about disclosing my name (in the least case I could be getting a lot of spam to my email, its not that hard to guess your private email from your name). What do you think can be "dangerous" on disclosing your full name? What are the pros and cons? Do you use your real name or a pseudonym in your projects? I read this question: What are the advantages and disadvantages to using your real name online? but that doesn't apply to me bacause it's about using your real name online (internet discussions, profiles, etc.) where I personally see no reason to use my real name... And there is also this question: Copyrighting software, templates, etc. under real name or screen name? which deals with creating a business or a brand which also doesn't apply to me because I will never sell/give away my open source project and if someone else joins in, they can write their name as co-author without any problems...

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >