Search Results

Search found 3637 results on 146 pages for 'dhcp over vpn'.

Page 26/146 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Discovering the default gateway without DHCP

    - by JavaRocky
    A crazy question, but is there anyway to discover the default gateway without DHCP? This would be for a device on a network which does not use DHCP which does not have an IP address as yet. I was thinking if I could discover the default gateway, then i could try to guess an unused ip address then broadcast on the network to see if it's being used. I may be asking for trouble i understand. E.g. if there is already a computer which has a static IP and is shutdown.

    Read the article

  • ClearOS - how to create a site to site VPN between two ClearOS boxes?

    - by Scott Szretter
    I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

    Read the article

  • Import PCF file in Windows 7 VPN connection

    - by Prashant
    I have got PCF file for VPN connection from my client to login into there network. I can able to us it with Cisco client without any problem, but I noticed there is option in Window 7 for connection to VPN natively and I'm could not able figure out how to import PCF file content to it. I really appreciate if any one can help with this...

    Read the article

  • Error 619 when connecting to ForeFront TMG VPN

    - by yang
    I have a fresh new Windows Server 2008 R2 Domain Setup and a ForeFront TMG installation. Both of them are newly installed. I enabled VPN client access and configured address assignment method. Now when I try to connect to VPN over internet (with Windows 7 client) I receive Error 619 stating that the credentials are wrong. Of course credentials are not wrong, something else is wrong here. Any help?

    Read the article

  • How to VPN on demand Mac OS X?

    - by Kami
    I'm trying to configure the Snow Leopard's VPN on demand service without success I've tried the following domain+configuration pairs but none of them have worked: domain.net default *.domain.net default My goal is that each time I go to www.domain.net with Safari, ssh server1.domain.net or everything else on this domain.net the connection will be established trough the VPN ! I've tried plenty of different configs but it has never worked so far... Edit : R

    Read the article

  • Connect to a Fortinet VPN with Ubuntu

    - by Dan
    I don't know a lot about VPNs but I'd like to connect to a Fortinet VPN with Ubuntu. I can connect on Windows using Forticlient just by entering the policy server (vpn.theserver.com) and then it asks for a user/password. I use IPSec.

    Read the article

  • DNS Server Order Incorrect on Windows 7 via PPTP VPN to Windows 2003 Server

    - by Simon
    Hi there. When I connect a Windows XP laptop via PPTP vpn to our Windows 2003 Server, the DNS Server order is correct: 192.168.8.3 208.67.222.222 208.67.220.220 But when I connect a Windows 7 laptop via PPTP VPN to our Windows 2003 Server, the DNS order is incorrect: 208.67.222.222 208.67.220.220 192.168.8.3 What do I need to do on our Windows 2003 Server to fix this so the when I do a ping, it will work correctly?

    Read the article

  • VPN providers and connection from a known location

    - by Ric
    I am interested using a VPN service. I want to visually monitor online advertisements in different location, Germany, France Nederlands and the UK. I would like a VPN provider which both connects from these locations to the website of interest. It should also allow me to choose the location of the server I connect from. A big plus would be the ability to compare the website from different connection side by side Do any providers allow this?

    Read the article

  • Site-to-Site vpn setup amazon ec2 openswan (left) and cisco asa 5540 (right)

    - by user197279
    Need help on this VPN set-up on amazon EC2 using openswan Left side: EC2: setup a peer ip:- according to client using cisco (must be public) encrypted network:- according to client using cisco (must be public) Right side: Cisco ASA 5540: Peer ip: 3.3.3.3 Peer host/rightsubnet: 3.3.3.30/32 (Public NAT'd ip) The goal is to setup a site-to-site vpn connection with the client and I need guidance on the setup required on EC2. Appreciate the help Thanks.

    Read the article

  • Access Router after logging into VPN

    - by Dan
    I access my linksys router through its webserver (192.168.1.1 into a web browser), but can no longer access it once I log into my work vpn. Is there a way I can still get at my router and change the settings? Or do I first have to disconnect from the VPN first? Thanks, Dan

    Read the article

  • How can I keep a VPN connection alive?

    - by Al
    I've been trying to find a way to run a torrent client strictly through a VPN. I am running Ubuntu 9.10, and use Ktorrent. I can connect to vpn.itshidden.com but I am worried about the connection dropping if I'm away from my computer. Any help would be appreciated.

    Read the article

  • VPN still working after rebooting without client - DrayTek client shows "No Connection"

    - by HeavenCore
    My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have the DrayTek VPN client, and a company i do some work for has a DrayTek Vigor router. The VPN client establishes a VPN to that remote company using an IPSec Tunnel (PreShared Key - no encryption) Last night i shut down my pc with the VPN tunnel still connected, when i turned my computer on this morning i accidentally clicked an RDP shortcut to 192.168.1.2 (a host in the remote company) and to my amazement it connected?!? I checked and the DrayTek VPN client isnt running, and when i did run it, it clearly shows "Status: No connection". confused as to how my machine can still talk to this remote machine i tried a trace: C:\Users\HeavenCore>tracert 192.168.1.2 Tracing route to C4SERVERII [192.168.1.2] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 15 ms 21 ms 32 ms C4SERVERII [192.168.1.2] Trace complete. No indication there as to how it's getting from my network to the remote host. with my network mask being 255.255.255.0 with ip 192.168.0.1 i dont even see how packets are routing to 192.168.1.1 - unless there was a static route in place, so i checked the route table: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.82 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.82 266 192.168.0.82 255.255.255.255 On-link 192.168.0.82 266 192.168.0.255 255.255.255.255 On-link 192.168.0.82 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.82 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.82 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.1 Default =========================================================================== As far as i can see, nothing indicating how my packets are getting to 192.168.1.2??? To confirm i was on a different subnet i did an ipconfig /all: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether net Controller Physical Address. . . . . . . . . : 00-23-54-F3-4E-BA DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.82(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Yet straight after confirming my ip and subnet as above i can go ahead and ping the remote machine: C:\Users\HeavenCore>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=48ms TTL=127 Reply from 192.168.1.2: bytes=32 time=23ms TTL=127 Reply from 192.168.1.2: bytes=32 time=103ms TTL=127 Reply from 192.168.1.2: bytes=32 time=25ms TTL=127 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 23ms, Maximum = 103ms, Average = 49ms Also, note on the ping how the times are 35ms ish, this clearly shows the pings are to the remote host and not something on my local lan (all stuff on my local lan pings in 0ms) - plus i verified the host was actually the host via RDP. My Question: Can an IPSec tunnel stay up some how after a reboot without use of the VPN client? (well, i can clearly see that it can) - where in windows is there visibility of this? how does my machine know where to route the packets? I appreciate any insights & thoughts!

    Read the article

  • SafeOffice 500 - how to enable VPN access to another network (out)

    - by Dani
    Hi, I have a safe office 500 box at my edge. (checkpoint's hardware firewall) I'm trying to connect to another office VPN using windows 7 pptp connection. It fails (saying something about enabling GRE). (after authenticating, hangs for a while, than give the error message.) Using the same computer with direct internet access (not behind the firewalls) works fine and I get connected. how do I setup the safe office to enable me to use vpn (pptp) out connections.

    Read the article

  • VPN Router drops connections

    - by Kathleen
    We are using a Netgear VPN Firewall Router FVS318v3.. We have a DSL connection here at the office, and my users complain of the connection dropping, or locking up on their end.. Latest firmware is installed, rebooting the router doesn't help, no other internet connectivity issues reported anywhere else (ie., no other internet connection problems here, or at their end, except when connecting to the VPN..) Is there anything else I can check to pinpoint this problem? TIA!!!

    Read the article

  • Setting up Windows 2008 VPN Server

    - by Ivan Vovnenko
    Hi, i'm trying to setup windows 2008 server as a L2TP/IPSEC VPN server (PPTP is not secure), to receive windows (xp+) and Mac connections. The win2008 is behind the router. Can anyone provide easy step-by-step instructions? I tries several tutorial but no luck. Also VPN clients setup both on mac and windows would be very helpful. Thanks in advance.

    Read the article

  • Are there any routers supporting client-side VPN?

    - by Andreas Hagen
    What I'm asking for is basically what the title says. I need a router that can forward all the data-traffic it receives through a VPN tunnel. Have Google'd a little but I can't seam to find a topic which the links to potential products still are active. The parameters to the specific VPN it is going to be used with is as follows: Sorry it is in Norwegian, but you should be able recognize the relevant parameters like encryption and such.

    Read the article

  • Setup VPN network for PS3

    - by L Franco
    Getting informed on setting up a home network so i can use VPN on my PS3, i live in Mexico but want the programming available in the US. Getting a little confused as every sites gives you different options, both in hardware and software. specially on subjects like dd-wrt, dns or vpn options... i know there is no "best" setup, but are there any tried and true?? Options in hardware and software would be apreciated...

    Read the article

  • Watching Netflix through a VPN

    - by Sergio
    Recently I bought a VPS from DigitalOcean. I setup a PPTP VPN so I could watch us Netflix content from outside the US. Now that I have it setup and all my traffic is going through the VPN, Netflix is still showing my home country content. Pandora is working, and when I search my IP it shows im in NY, so I guess traffic is being routed correctly. I have also tried to delete flash settings and cookies from browser. Any ideas on what could be happening?

    Read the article

  • Routing all data through an VPN tunnel with ppp

    - by Oliver
    I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

    Read the article

  • Remote Desktop over VPN or SSH?

    - by Jonathan
    I want to provide a remote employee remote desktop into a PC in the office and am trying to decide between the following two options: Use Microsoft VPN to get him a local network IP. Use RDP to connect to host machine. Use local SSH tunneling for VPN port. Connect RDP to localhost:portNumber Is either option more secure than the other? Will either option perform better than the other? Are there any better options I've missed or considerations I should make?

    Read the article

  • Multiplue Simultaneous VPN Connection Limit

    - by stukelly
    Is it possible to have more than two active VPN connections on Windows XP? I have a customer with three VPN client connections on Windows XP Professional. I can connect to any two sites at the same time, but the third connection always fails. Is this a limit within the operating system?

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >