Search Results

Search found 11607 results on 465 pages for 'disabling features and an'.

Page 26/465 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• HTG Explains: Why is Printer Ink So Expensive?

  - by Chris Hoffman

  Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

  Read the article

• UPK 3.6.1 New Feature - Publish Presentation

  - by peter.maravelias

  UPK includes numerous options for deploying the content you have created. Most UPK users are familiar with the UPK Player and the various document outputs that have been available as publishing formats for some time now. In addition UPK provides the content developer the ability to publish content for use in specific environments, LMS, Test Director are two examples. UPK 3.6.1 adds the Presentation publishing type. The Presentation publishing type produces a slideshow presentation of screenshots and text of each topic as a separate Microsoft PowerPoint file. To publish to the presentation option just select the type under the documents category in the publishing wizard. Give this new publishing type a try and let us know what you think by posting a comment. The Presentation publishing type feature came from a customer request and given the ever growing methods and channels for communication we'd like to know what other output types or methods of using existing outputs you would like to see in a future release of UPK.

  Read the article

• HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

  - by Chris Hoffman

  IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled:  Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr     

  Read the article

• Windows 8.1 Will Start Encrypting Hard Drives By Default: Everything You Need to Know

  - by Chris Hoffman

  Windows 8.1 will automatically encrypt the storage on modern Windows PCs. This will help protect your files in case someone steals your laptop and tries to get at them, but it has important ramifications for data recovery. Previously, “BitLocker” was available on Professional and Enterprise editions of Windows, while “Device Encryption” was available on Windows RT and Windows Phone. Device encryption is included with all editions of Windows 8.1 — and it’s on by default. When Your Hard Drive Will Be Encrypted Windows 8.1 includes “Pervasive Device Encryption.” This works a bit differently from the standard BitLocker feature that has been included in Professional, Enterprise, and Ultimate editions of Windows for the past few versions. Before Windows 8.1 automatically enables Device Encryption, the following must be true: The Windows device “must support connected standby and meet the Windows Hardware Certification Kit (HCK) requirements for TPM and SecureBoot on ConnectedStandby systems.”  (Source) Older Windows PCs won’t support this feature, while new Windows 8.1 devices you pick up will have this feature enabled by default. When Windows 8.1 installs cleanly and the computer is prepared, device encryption is “initialized” on the system drive and other internal drives. Windows uses a clear key at this point, which is removed later when the recovery key is successfully backed up. The PC’s user must log in with a Microsoft account with administrator privileges or join the PC to a domain. If a Microsoft account is used, a recovery key will be backed up to Microsoft’s servers and encryption will be enabled. If a domain account is used, a recovery key will be backed up to Active Directory Domain Services and encryption will be enabled. If you have an older Windows computer that you’ve upgraded to Windows 8.1, it may not support Device Encryption. If you log in with a local user account, Device Encryption won’t be enabled. If you upgrade your Windows 8 device to Windows 8.1, you’ll need to enable device encryption, as it’s off by default when upgrading. Recovering An Encrypted Hard Drive Device encryption means that a thief can’t just pick up your laptop, insert a Linux live CD or Windows installer disc, and boot the alternate operating system to view your files without knowing your Windows password. It means that no one can just pull the hard drive from your device, connect the hard drive to another computer, and view the files. We’ve previously explained that your Windows password doesn’t actually secure your files. With Windows 8.1, average Windows users will finally be protected with encryption by default. However, there’s a problem — if you forget your password and are unable to log in, you’d also be unable to recover your files. This is likely why encryption is only enabled when a user logs in with a Microsoft account (or connects to a domain). Microsoft holds a recovery key, so you can gain access to your files by going through a recovery process. As long as you’re able to authenticate using your Microsoft account credentials — for example, by receiving an SMS message on the cell phone number connected to your Microsoft account — you’ll be able to recover your encrypted data. With Windows 8.1, it’s more important than ever to configure your Microsoft account’s security settings and recovery methods so you’ll be able to recover your files if you ever get locked out of your Microsoft account. Microsoft does hold the recovery key and would be capable of providing it to law enforcement if it was requested, which is certainly a legitimate concern in the age of PRISM. However, this encryption still provides protection from thieves picking up your hard drive and digging through your personal or business files. If you’re worried about a government or a determined thief who’s capable of gaining access to your Microsoft account, you’ll want to encrypt your hard drive with software that doesn’t upload a copy of your recovery key to the Internet, such as TrueCrypt. How to Disable Device Encryption There should be no real reason to disable device encryption. If nothing else, it’s a useful feature that will hopefully protect sensitive data in the real world where people — and even businesses — don’t enable encryption on their own. As encryption is only enabled on devices with the appropriate hardware and will be enabled by default, Microsoft has hopefully ensured that users won’t see noticeable slow-downs in performance. Encryption adds some overhead, but the overhead can hopefully be handled by dedicated hardware. If you’d like to enable a different encryption solution or just disable encryption entirely, you can control this yourself. To do so, open the PC settings app — swipe in from the right edge of the screen or press Windows Key + C, click the Settings icon, and select Change PC settings. Navigate to PC and devices -> PC info. At the bottom of the PC info pane, you’ll see a Device Encryption section. Select Turn Off if you want to disable device encryption, or select Turn On if you want to enable it — users upgrading from Windows 8 will have to enable it manually in this way. Note that Device Encryption can’t be disabled on Windows RT devices, such as Microsoft’s Surface RT and Surface 2. If you don’t see the Device Encryption section in this window, you’re likely using an older device that doesn’t meet the requirements and thus doesn’t support Device Encryption. For example, our Windows 8.1 virtual machine doesn’t offer Device Encryption configuration options. This is the new normal for Windows PCs, tablets, and devices in general. Where files on typical PCs were once ripe for easy access by thieves, Windows PCs are now encrypted by default and recovery keys are sent to Microsoft’s servers for safe keeping. This last part may be a bit creepy, but it’s easy to imagine average users forgetting their passwords — they’d be very upset if they lost all their files because they had to reset their passwords. It’s also an improvement over Windows PCs being completely unprotected by default.     

  Read the article

• How to Create an Easy Pixel Art Avatar in Photoshop or GIMP

  - by Eric Z Goodnight

  Boingboing.net has a cool set of meticulously drawn pixel art portraits for their key writers. If you’re a lover of pixel art, why not try and recreate a similar avatars for yourself with a few simple filters in either Photoshop or GIMP? How-To Geek has covered a few different ways to create pixel art from ordinary graphics, and this simple method is more simple pixel art, but using a different technique. Watch as we transform two ordinary photographs into blocky masterpieces, as well as compare the techniques used between Photoshop and the GIMP. Read on!  How to Create an Easy Pixel Art Avatar in Photoshop or GIMPInternet Explorer 9 Released: Here’s What You Need To KnowHTG Explains: How Does Email Work?

  Read the article

• "What Happens in Vegas…" - Oracle to Present at Gartner AADI Conference

  - by Bruce Tierney

  “What Happens in Vegas, Stays in Vegas”…with the exception of insights to help you jumpstart your cloud integration and mobile enablement including these three highlights from the upcoming Oracle session “Simplifying Integration - The Cloud and Mobile Prerequisite”: How To Simplify Complex Application Infrastructures – Strategies for how to simplify while expanding on-premise to integrate with SaaS applications, Oracle Cloud, and mobile enablement. Presented by Tim Hall, Oracle’s Senior Director of Product Management Customer Case Study On Cloud Integration And Mobile App Enablement – Hear BMC present tips on how they used Oracle SOA Suite to integrate with Salesforce, Eloqua, WebEx, and more than 10 other SaaS applications. Also covered will be their smartphone and tablet enablement implementation. Oracle’s Integration Solution – A brief overview of how Oracle’s core integration products provide a unified approach to the many components of integration and mobile enablement. Image: BMC's Cloud Integration using Oracle SOA Suite Stop by the Oracle booth to chat with us and join the Oracle Session on Wed. Nov 28th at 9:45 a.m. For more information about Gartner Application Architecture, Development & Integration (AADI) conference at Caesar’s Palace November 27-29 2012, see this link

  Read the article

• How to Use Offline Files in Windows to Cache Your Networked Files Offline

  - by Taylor Gibb

  The problem with storing all your files on a file server or networked machine is that when you leave the network, how are you going to access your files? Instead of using a VPN or Dropbox, you can use the Offline Files feature built into Windows. Note: You should probably not be using this guide to make your 2 terabyte movie collection available offline—while it may work, it is not recommended just because the Offline Files feature isn’t made for storing massive amounts of data offline. How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To HTG Explains: When Do You Need to Update Your Drivers?

  Read the article

• Cloud and On-Premises Applications Integration using Oracle Integration Adapters

  - by Ramkumar Menon

  See how Oracle Integration adapters will continue to provide connectivity and harness information from diverse enterprise applications and technologies—both on-premises and in the cloud on our Exclusive Openworld session - "CON8642 - Cloud and On-Premises Applications Integration, Using Oracle Integration Adapters ". The session will cover the trends and themes of Application Integration today, and describe how Oracle's suite of Adapters help you integrate and extend your Applications using a Service Oriented Architecture today and in the future. Session Speakers Vikas Anand - Director, Product Management Ramkumar Menon - Senior Product Manager, SOA Suite Stephen Mcritchie - SOA Suite Product Development Schedule: Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone South - 310, San Francisco

  Read the article

• How to Sync Any Folder With SkyDrive on Windows 8.1

  - by Chris Hoffman

  Before Windows 8.1, it was possible to sync any folder on your computer with SkyDrive using symbolic links. This method no longer works now that SkyDrive is baked into Windows 8.1, but there are other tricks you can use. Creating a symbolic link or directory junction inside your SkyDrive folder will give you an empty folder in your SkyDrive cloud storage. Confusingly, the files will appear inside the SkyDrive Modern app as if they were being synced, but they aren’t. The Solution With SkyDrive refusing to understand and accept symbolic links in its own folder, the best option is probably to use symbolic links anyway — but in reverse. For example, let’s say you have a program that automatically saves important data to a folder anywhere on your hard drive — whether it’s C:\Users\USER\Documents\, C:\Program\Data, or anywhere else. Rather than trying to trick SkyDrive into understanding a symbolic link, we could instead move the actual folder itself to SkyDrive and then use a symbolic link at the folder’s original location to trick the original program. This may not work for every single program out there. But it will likely work for most programs, which use standard Windows API calls to access folders and save files. We’re just flipping the old solution here — we can’t trick SkyDrive anymore, so let’s try to trick other programs instead. Moving a Folder and Creating a Symbolic Link First, ensure no program is using the external folder. For example, if it’s a program data or settings folder, close the program that’s using the folder. Next, simply move the folder to your SkyDrive folder. Right-click the external folder, select Cut, go to the SkyDrive folder, right-click and select Paste. The folder will now be located in the SkyDrive folder itself, so it will sync normally. Next, open a Command Prompt window as Administrator. Right-click the Start button on the taskbar or press Windows Key + X and select Command Prompt (Administrator) to open it. Run the following command to create a symbolic link at the original location of the folder: mklink /d “C:\Original\Folder\Location” “C:\Users\NAME\SkyDrive\FOLDERNAME\” Enter the correct paths for the exact location of the original folder and the current location of the folder in your SkyDrive. Windows will then create a symbolic link at the folder’s original location. Most programs should hopefully be tricked by this symbolic location, saving their files directly to SkyDrive. You can test this yourself. Put a file into the folder at its original location. It will be saved to SkyDrive and sync normally, appearing in your SkyDrive storage online. One downside here is that you won’t be able to save a file onto SkyDrive without it taking up space on the same hard drive SkyDrive is on. You won’t be able to scatter folders across multiple hard drives and sync them all. However, you could always change the location of the SkyDrive folder on Windows 8.1 and put it on a drive with a larger amount of free space. To do this, right-click the SkyDrive folder in File Explorer, select Properties, and use the options on the Location tab. You could even use Storage Spaces to combine the drives into one larger drive. Automatically Copy the Original Files to SkyDrive Another option would be to run a program that automatically copies files from another folder on your computer to your SkyDrive folder. For example, let’s say you want to sync copies of important log files that a program creates in a specific folder. You could use a program that allows you to schedule automatic folder-mirroring, configuring the program to regularly copy the contents of your log folder to your SkyDrive folder. This may be a useful alternative for some use cases, although it isn’t the same as standard syncing. You’ll end up with two copies of the files taking up space on your system, which won’t be ideal for large files. The files also won’t be instantly uploaded to your SkyDrive storage after they’re created, but only after the scheduled task runs. There are many options for this, including Microsoft’s own SyncToy, which continues to work on Windows 8. If you were using the symbolic link trick to automatically sync copies of PC game save files with SkyDrive, you could just install GameSave Manager. It can be configured to automatically create backup copies of your computer’s PC game save files on a schedule, saving them to SkyDrive where they’ll be synced and backed up online. SkyDrive support was completely rewritten for Windows 8.1, so it’s not surprising that this trick no longer works. The ability to use symbolic links in previous versions of SkyDrive was never officially supported, so it’s not surprising to see it break after a rewrite. None of the methods above are as convenient and quick as the old symbolic link method, but they’re the best we can do with the SkyDrive integration Microsoft has given us in Windows 8.1. It’s still possible to use symbolic links to easily sync other folders with competing cloud storage services like Dropbox and Google Drive, so you may want to consider switching away from SkyDrive if this feature is critical to you.     

  Read the article

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• How to Run Low-Cost Minecraft on a Raspberry Pi for Block Building on the Cheap

  - by Jason Fitzpatrick

  We’ve shown you how to run your own blocktastic personal Minecraft server on a Windows/OSX box, but what if you crave something lighter weight, more energy efficient, and always ready for your friends? Read on as we turn a tiny Raspberry Pi machine into a low-cost Minecraft server you can leave on 24/7 for around a penny a day. Why Do I Want to Do This? There’s two aspects to this tutorial, running your own Minecraft server and specifically running that Minecraft server on a Raspberry Pi. Why would you want to run your own Minecraft server? It’s a really great way to extend and build upon the Minecraft play experience. You can leave the server running when you’re not playing so friends and family can join and continue building your world. You can mess around with game variables and introduce mods in a way that isn’t possible when you’re playing the stand-alone game. It also gives you the kind of control over your multiplayer experience that using public servers doesn’t, without incurring the cost of hosting a private server on a remote host. While running a Minecraft server on its own is appealing enough to a dedicated Minecraft fan, running it on the Raspberry Pi is even more appealing. The tiny little Pi uses so little resources that you can leave your Minecraft server running 24/7 for a couple bucks a year. Aside from the initial cost outlay of the Pi, an SD card, and a little bit of time setting it up, you’ll have an always-on Minecraft server at a monthly cost of around one gumball. What Do I Need? For this tutorial you’ll need a mix of hardware and software tools; aside from the actual Raspberry Pi and SD card, everything is free. 1 Raspberry Pi (preferably a 512MB model) 1 4GB+ SD card This tutorial assumes that you have already familiarized yourself with the Raspberry Pi and have installed a copy of the Debian-derivative Raspbian on the device. If you have not got your Pi up and running yet, don’t worry! Check out our guide, The HTG Guide to Getting Started with Raspberry Pi, to get up to speed. Optimizing Raspbian for the Minecraft Server Unlike other builds we’ve shared where you can layer multiple projects over one another (e.g. the Pi is more than powerful enough to serve as a weather/email indicator and a Google Cloud Print server at the same time) running a Minecraft server is a pretty intense operation for the little Pi and we’d strongly recommend dedicating the entire Pi to the process. Minecraft seems like a simple game, with all its blocky-ness and what not, but it’s actually a pretty complex game beneath the simple skin and required a lot of processing power. As such, we’re going to tweak the configuration file and other settings to optimize Rasbian for the job. The first thing you’ll need to do is dig into the Raspi-Config application to make a few minor changes. If you’re installing Raspbian fresh, wait for the last step (which is the Raspi-Config), if you already installed it, head to the terminal and type in “sudo raspi-config” to launch it again. One of the first and most important things we need to attend to is cranking up the overclock setting. We need all the power we can get to make our Minecraft experience enjoyable. In Raspi-Config, select option number 7 “Overclock”. Be prepared for some stern warnings about overclocking, but rest easy knowing that overclocking is directly supported by the Raspberry Pi foundation and has been included in the configuration options since late 2012. Once you’re in the actual selection screen, select “Turbo 1000MhHz”. Again, you’ll be warned that the degree of overclocking you’ve selected carries risks (specifically, potential corruption of the SD card, but no risk of actual hardware damage). Click OK and wait for the device to reset. Next, make sure you’re set to boot to the command prompt, not the desktop. Select number 3 “Enable Boot to Desktop/Scratch”  and make sure “Console Text console” is selected. Back at the Raspi-Config menu, select number 8 “Advanced Options’. There are two critical changes we need to make in here and one option change. First, the critical changes. Select A3 “Memory Split”: Change the amount of memory available to the GPU to 16MB (down from the default 64MB). Our Minecraft server is going to ruin in a GUI-less environment; there’s no reason to allocate any more than the bare minimum to the GPU. After selecting the GPU memory, you’ll be returned to the main menu. Select “Advanced Options” again and then select A4 “SSH”. Within the sub-menu, enable SSH. There is very little reason to keep this Pi connected to a monitor and keyboard, by enabling SSH we can remotely access the machine from anywhere on the network. Finally (and optionally) return again to the “Advanced Options” menu and select A2 “Hostname”. Here you can change your hostname from “raspberrypi” to a more fitting Minecraft name. We opted for the highly creative hostname “minecraft”, but feel free to spice it up a bit with whatever you feel like: creepertown, minecraft4life, or miner-box are all great minecraft server names. That’s it for the Raspbian configuration tab down to the bottom of the main screen and select “Finish” to reboot. After rebooting you can now SSH into your terminal, or continue working from the keyboard hooked up to your Pi (we strongly recommend switching over to SSH as it allows you to easily cut and paste the commands). If you’ve never used SSH before, check out how to use PuTTY with your Pi here. Installing Java on the Pi The Minecraft server runs on Java, so the first thing we need to do on our freshly configured Pi is install it. Log into your Pi via SSH and then, at the command prompt, enter the following command to make a directory for the installation: sudo mkdir /java/ Now we need to download the newest version of Java. At the time of this publication the newest release is the OCT 2013 update and the link/filename we use will reflect that. Please check for a more current version of the Linux ARMv6/7 Java release on the Java download page and update the link/filename accordingly when following our instructions. At the command prompt, enter the following command: sudo wget --no-check-certificate http://www.java.net/download/jdk8/archive/b111/binaries/jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz Once the download has finished successfully, enter the following command: sudo tar zxvf jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz -C /opt/ Fun fact: the /opt/ directory name scheme is a remnant of early Unix design wherein the /opt/ directory was for “optional” software installed after the main operating system; it was the /Program Files/ of the Unix world. After the file has finished extracting, enter: sudo /opt/jdk1.8.0/bin/java -version This command will return the version number of your new Java installation like so: java version "1.8.0-ea" Java(TM) SE Runtime Environment (build 1.8.0-ea-b111) Java HotSpot(TM) Client VM (build 25.0-b53, mixed mode) If you don’t see the above printout (or a variation thereof if you’re using a newer version of Java), try to extract the archive again. If you do see the readout, enter the following command to tidy up after yourself: sudo rm jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz At this point Java is installed and we’re ready to move onto installing our Minecraft server! Installing and Configuring the Minecraft Server Now that we have a foundation for our Minecraft server, it’s time to install the part that matter. We’ll be using SpigotMC a lightweight and stable Minecraft server build that works wonderfully on the Pi. First, grab a copy of the the code with the following command: sudo wget http://ci.md-5.net/job/Spigot/lastSuccessfulBuild/artifact/Spigot-Server/target/spigot.jar This link should remain stable over time, as it points directly to the most current stable release of Spigot, but if you have any issues you can always reference the SpigotMC download page here. After the download finishes successfully, enter the following command: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Note: if you’re running the command on a 256MB Pi change the 256 and 496 in the above command to 128 and 256, respectively. Your server will launch and a flurry of on-screen activity will follow. Be prepared to wait around 3-6 minutes or so for the process of setting up the server and generating the map to finish. Future startups will take much less time, around 20-30 seconds. Note: If at any point during the configuration or play process things get really weird (e.g. your new Minecraft server freaks out and starts spawning you in the Nether and killing you instantly), use the “stop” command at the command prompt to gracefully shutdown the server and let you restart and troubleshoot it. After the process has finished, head over to the computer you normally play Minecraft on, fire it up, and click on Multiplayer. You should see your server: If your world doesn’t popup immediately during the network scan, hit the Add button and manually enter the address of your Pi. Once you connect to the server, you’ll see the status change in the server status window: According to the server, we’re in game. According to the actual Minecraft app, we’re also in game but it’s the middle of the night in survival mode: Boo! Spawning in the dead of night, weaponless and without shelter is no way to start things. No worries though, we need to do some more configuration; no time to sit around and get shot at by skeletons. Besides, if you try and play it without some configuration tweaks first, you’ll likely find it quite unstable. We’re just here to confirm the server is up, running, and accepting incoming connections. Once we’ve confirmed the server is running and connectable (albeit not very playable yet), it’s time to shut down the server. Via the server console, enter the command “stop” to shut everything down. When you’re returned to the command prompt, enter the following command: sudo nano server.properties When the configuration file opens up, make the following changes (or just cut and paste our config file minus the first two lines with the name and date stamp): #Minecraft server properties #Thu Oct 17 22:53:51 UTC 2013 generator-settings= #Default is true, toggle to false allow-nether=false level-name=world enable-query=false allow-flight=false server-port=25565 level-type=DEFAULT enable-rcon=false force-gamemode=false level-seed= server-ip= max-build-height=256 spawn-npcs=true white-list=false spawn-animals=true texture-pack= snooper-enabled=true hardcore=false online-mode=true pvp=true difficulty=1 player-idle-timeout=0 gamemode=0 #Default 20; you only need to lower this if you're running #a public server and worried about loads. max-players=20 spawn-monsters=true #Default is 10, 3-5 ideal for Pi view-distance=5 generate-structures=true spawn-protection=16 motd=A Minecraft Server In the server status window, seen through your SSH connection to the pi, enter the following command to give yourself operator status on your Minecraft server (so that you can use more powerful commands in game, without always returning to the server status window). op [your minecraft nickname] At this point things are looking better but we still have a little tweaking to do before the server is really enjoyable. To that end, let’s install some plugins. The first plugin, and the one you should install above all others, is NoSpawnChunks. To install the plugin, first visit the NoSpawnChunks webpage and grab the download link for the most current version. As of this writing the current release is v0.3. Back at the command prompt (the command prompt of your Pi, not the server console–if your server is still active shut it down) enter the following commands: cd /home/pi/plugins sudo wget http://dev.bukkit.org/media/files/586/974/NoSpawnChunks.jar Next, visit the ClearLag plugin page, and grab the latest link (as of this tutorial, it’s v2.6.0). Enter the following at the command prompt: sudo wget http://dev.bukkit.org/media/files/743/213/Clearlag.jar Because the files aren’t compressed in a .ZIP or similar container, that’s all there is to it: the plugins are parked in the plugin directory. (Remember this for future plugin downloads, the file needs to be whateverplugin.jar, so if it’s compressed you need to uncompress it in the plugin directory.) Resart the server: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Be prepared for a slightly longer startup time (closer to the 3-6 minutes and much longer than the 30 seconds you just experienced) as the plugins affect the world map and need a minute to massage everything. After the spawn process finishes, type the following at the server console: plugins This lists all the plugins currently active on the server. You should see something like this: If the plugins aren’t loaded, you may need to stop and restart the server. After confirming your plugins are loaded, go ahead and join the game. You should notice significantly snappier play. In addition, you’ll get occasional messages from the plugins indicating they are active, as seen below: At this point Java is installed, the server is installed, and we’ve tweaked our settings for for the Pi.  It’s time to start building with friends!     

  Read the article

• 6 Things You Shouldn’t Do With Solid-State Drives

  - by Chris Hoffman

  Solid-state drives are different from the mechanical, magnetic hard drives in wide use. Many of the things you’ve done with typical mechanical hard drives shouldn’t be done with newer solid-state drives. Solid-state drives are presented by the operating system the same way mechanical drives are, but they work differently. If you’re a geek, knowing what you shouldn’t do is important.    

  Read the article

• UI Testing with Visual Studio 2010 Feature Pack 2

  - by Seth P.

  One of the most intriguing items in the recently released Visual Studio 2010 Feature Pack 2 is the ability to create and edit UI tests in Silverlight. Here is an example of a coded UI test. I haven't had much time to use it yet, but for people who have, I am curious as to what your thoughts are. Is this something you have found to be particularly useful? I would like to be able to automate a significant amount of regression testing that we are currently performing manually. In your experience, has it made a major impact on the resources that you would normally have to dedicate to testing? Thanks, Seth

  Read the article

• 8 Reasons Why Even Microsoft Agrees the Windows Desktop is a Nightmare

  - by Chris Hoffman

  Let’s be honest: The Windows desktop is a mess. Sure, it’s extremely powerful and has a huge software library, but it’s not a good experience for average people. It’s not even a good experience for geeks, although we tolerate it. Even Microsoft agrees about this. Microsoft’s Surface tablets with Windows RT don’t support any third-party desktop apps. They consider this a feature — users can’t install malware and other desktop junk, so the system will always be speedy and secure. Malware is Still Common Malware may not affect geeks, but it certainly continues to affect average people. Securing Windows, keeping it secure, and avoiding unsafe programs is a complex process. There are over 50 different file extensions that can contain harmful code to keep track of. It’s easy to have theoretical discussions about how malware could infect Mac computers, Android devices, and other systems. But Mac malware is extremely rare, and has  generally been caused by problem with the terrible Java plug-in. Macs are configured to only run executables from identified developers by default, whereas Windows will run everything. Android malware is talked about a lot, but Android malware is rare in the real world and is generally confined to users who disable security protections and install pirated apps. Google has also taken action, rolling out built-in antivirus-like app checking to all Android devices, even old ones running Android 2.3, via Play Services. Whatever the reason, Windows malware is still common while malware for other systems isn’t. We all know it — anyone who does tech support for average users has dealt with infected Windows computers. Even users who can avoid malware are stuck dealing with complex and nagging antivirus programs, especially since it’s now so difficult to trust Microsoft’s antivirus products. Manufacturer-Installed Bloatware is Terrible Sit down with a new Mac, Chromebook, iPad, Android tablet, Linux laptop, or even a Surface running Windows RT and you can enjoy using your new device. The system is a clean slate for you to start exploring and installing your new software. Sit down with a new Windows PC and the system is a mess. Rather than be delighted, you’re stuck reinstalling Windows and then installing the necessary drivers or you’re forced to start uninstalling useless bloatware programs one-by-one, trying to figure out which ones are actually useful. After uninstalling the useless programs, you may end up with a system tray full of icons for ten different hardware utilities anyway. The first experience of using a new Windows PC is frustration, not delight. Yes, bloatware is still a problem on Windows 8 PCs. Manufacturers can customize the Refresh image, preventing bloatware rom easily being removed. Finding a Desktop Program is Dangerous Want to install a Windows desktop program? Well, you’ll have to head to your web browser and start searching. It’s up to you, the user, to know which programs are safe and which are dangerous. Even if you find a website for a reputable program, the advertisements on that page will often try to trick you into downloading fake installers full of adware. While it’s great to have the ability to leave the app store and get software that the platform’s owner hasn’t approved — as on Android — this is no excuse for not providing a good, secure software installation experience for typical users installing typical programs. Even Reputable Desktop Programs Try to Install Junk Even if you do find an entirely reputable program, you’ll have to keep your eyes open while installing it. It will likely try to install adware, add browse toolbars, change your default search engine, or change your web browser’s home page. Even Microsoft’s own programs do this — when you install Skype for Windows desktop, it will attempt to modify your browser settings t ouse Bing, even if you’re specially chosen another search engine and home page. With Microsoft setting such an example, it’s no surprise so many other software developers have followed suit. Geeks know how to avoid this stuff, but there’s a reason program installers continue to do this. It works and tricks many users, who end up with junk installed and settings changed. The Update Process is Confusing On iOS, Android, and Windows RT, software updates come from a single place — the app store. On Linux, software updates come from the package manager. On Mac OS X, typical users’ software updates likely come from the Mac App Store. On the Windows desktop, software updates come from… well, every program has to create its own update mechanism. Users have to keep track of all these updaters and make sure their software is up-to-date. Most programs now have their act together and automatically update by default, but users who have old versions of Flash and Adobe Reader installed are vulnerable until they realize their software isn’t automatically updating. Even if every program updates properly, the sheer mess of updaters is clunky, slow, and confusing in comparison to a centralized update process. Browser Plugins Open Security Holes It’s no surprise that other modern platforms like iOS, Android, Chrome OS, Windows RT, and Windows Phone don’t allow traditional browser plugins, or only allow Flash and build it into the system. Browser plugins provide a wealth of different ways for malicious web pages to exploit the browser and open the system to attack. Browser plugins are one of the most popular attack vectors because of how many users have out-of-date plugins and how many plugins, especially Java, seem to be designed without taking security seriously. Oracle’s Java plugin even tries to install the terrible Ask toolbar when installing security updates. That’s right — the security update process is also used to cram additional adware into users’ machines so unscrupulous companies like Oracle can make a quick buck. It’s no wonder that most Windows PCs have an out-of-date, vulnerable version of Java installed. Battery Life is Terrible Windows PCs have bad battery life compared to Macs, IOS devices, and Android tablets, all of which Windows now competes with. Even Microsoft’s own Surface Pro 2 has bad battery life. Apple’s 11-inch MacBook Air, which has very similar hardware to the Surface Pro 2, offers double its battery life when web browsing. Microsoft has been fond of blaming third-party hardware manufacturers for their poorly optimized drivers in the past, but there’s no longer any room to hide. The problem is clearly Windows. Why is this? No one really knows for sure. Perhaps Microsoft has kept on piling Windows component on top of Windows component and many older Windows components were never properly optimized. Windows Users Become Stuck on Old Windows Versions Apple’s new OS X 10.9 Mavericks upgrade is completely free to all Mac users and supports Macs going back to 2007. Apple has also announced their intention that all new releases of Mac OS X will be free. In 2007, Microsoft had just shipped Windows Vista. Macs from the Windows Vista era are being upgraded to the latest version of the Mac operating system for free, while Windows PCs from the same era are probably still using Windows Vista. There’s no easy upgrade path for these people. They’re stuck using Windows Vista and maybe even the outdated Internet Explorer 9 if they haven’t installed a third-party web browser. Microsoft’s upgrade path is for these people to pay $120 for a full copy of Windows 8.1 and go through a complicated process that’s actaully a clean install. Even users of Windows 8 devices will probably have to pay money to upgrade to Windows 9, while updates for other operating systems are completely free. If you’re a PC geek, a PC gamer, or someone who just requires specialized software that only runs on Windows, you probably use the Windows desktop and don’t want to switch. That’s fine, but it doesn’t mean the Windows desktop is actually a good experience. Much of the burden falls on average users, who have to struggle with malware, bloatware, adware bundled in installers, complex software installation processes, and out-of-date software. In return, all they get is the ability to use a web browser and some basic Office apps that they could use on almost any other platform without all the hassle. Microsoft would agree with this, touting Windows RT and their new “Windows 8-style” app platform as the solution. Why else would Microsoft, a “devices and services” company, position the Surface — a device without traditional Windows desktop programs — as their mass-market device recommended for average people? This isn’t necessarily an endorsement of Windows RT. If you’re tech support for your family members and it comes time for them to upgrade, you may want to get them off the Windows desktop and tell them to get a Mac or something else that’s simple. Better yet, if they get a Mac, you can tell them to visit the Apple Store for help instead of calling you. That’s another thing Windows PCs don’t offer — good manufacturer support. Image Credit: Blanca Stella Mejia on Flickr, Collin Andserson on Flickr, Luca Conti on Flickr     

  Read the article

• How to Share Files Between User Accounts on Windows, Linux, or OS X

  - by Chris Hoffman

  Your operating system provides each user account with its own folders when you set up several different user accounts on the same computer. Shared folders allow you to share files between user accounts. This process works similarly on Windows, Linux, and Mac OS X. These are all powerful multi-user operating systems with similar folder and file permission systems. Windows On Windows, the “Public” user’s folders are accessible to all users. You’ll find this folder under C:\Users\Public by default. Files you place in any of these folders will be accessible to other users, so it’s a good way to share music, videos, and other types of files between users on the same computer. Windows even adds these folders to each user’s libraries by default. For example, a user’s Music library contains the user’s music folder under C:\Users\NAME\as well as the public music folder under C:\Users\Public\. This makes it easy for each user to find the shared, public files. It also makes it easy to make a file public — just drag and drop a file from the user-specific folder to the public folder in the library. Libraries are hidden by default on Windows 8.1, so you’ll have to unhide them to do this. These Public folders can also be used to share folders publically on the local network. You’ll find the Public folder sharing option under Advanced sharing settings in the Network and Sharing Control Panel. You could also choose to make any folder shared between users, but this will require messing with folder permissions in Windows. To do this, right-click a folder anywhere in the file system and select Properties. Use the options on the Security tab to change the folder’s permissions and make it accessible to different user accounts. You’ll need administrator access to do this. Linux This is a bit more complicated on Linux, as typical Linux distributions don’t come with a special user folder all users have read-write access to. The Public folder on Ubuntu is for sharing files between computers on a network. You can use Linux’s permissions system to give other user accounts read or read-write access to specific folders. The process below is for Ubuntu 14.04, but it should be identical on any other Linux distribution using GNOME with the Nautilus file manager. It should be similar for other desktop environments, too. Locate the folder you want to make accessible to other users, right-click it, and select Properties. On the Permissions tab, give “Others” the “Create and delete files” permission. Click the Change Permissions for Enclosed Files button and give “Others” the “Read and write” and “Create and Delete Files” permissions. Other users on the same computer will then have read and write access to your folder. They’ll find it under /home/YOURNAME/folder under Computer. To speed things up, they can create a link or bookmark to the folder so they always have easy access to it. Mac OS X Mac OS X creates a special Shared folder that all user accounts have access to. This folder is intended for sharing files between different user accounts. It’s located at /Users/Shared. To access it, open the Finder and click Go > Computer. Navigate to Macintosh HD > Users > Shared. Files you place in this folder can be accessed by any user account on your Mac. These tricks are useful if you’re sharing a computer with other people and you all have your own user accounts — maybe your kids have their own limited accounts. You can share a music library, downloads folder, picture archive, videos, documents, or anything else you like without keeping duplicate copies.

  Read the article

• HTG Explains: Understanding Routers, Switches, and Network Hardware

  - by Jason Fitzpatrick

  Today we’re taking a look at the home networking hardware: what the individual pieces do, when you need them, and how best to deploy them. Read on to get a clearer picture of what you need to optimize your home network. When do you need a switch? A hub? What exactly does a router do? Do you need a router if you have a single computer? Network technology can be quite an arcane area of study but armed with the right terms and a general overview of how devices function on your home network you can deploy your network with confidence. HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

  Read the article

• 3 Ways to Make Steam Even Faster

  - by Chris Hoffman

  Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

  Read the article

• Oracle Announces Availability of Oracle Exaskeleton with Extreme Scale

  - by Bruce Tierney

  The World’s First Human Scale Body Surface (HSBS) Designed to Toughen Spineless Wimps April 1, 2012 Building on the success of Oracle Exalogic, Oracle Exadata, and Oracle Exalytics, Oracle today announced the general availability of Oracle Exaskeleton, toughening up spineless wimps across the globe through the introduction of extreme scalability over the human body leveraging a revolutionary new technology called Human Scale Body Surface (HSBS). First Customer Ship (FCS) was received by the little known and mostly unsuccessful superhero Awkwardman. After applying Oracle Exaskeleton with extreme scale, he has since rebranded himself as Aquaman. Said Aquaman, “I used to feel so helpless in my skin…now I feel like…well…a highly scaled Engineered System thanks to Oracle!” Thousand of meek and mild individuals eagerly lined up outside Oracle Corporation’s Redwood Shores office to purchase the new Oracle Exaskeleton, with the hope of finally gaining the spine they never had. Unfortunately for the individuals, a bully was spotted allegedly kicking the sand covering the beaches of Redwood Shores into the still spineless Exaskeleton hopefuls. Supporting Quotes “Industry analysts are inquiring if Oracle Exaskeleton is a radical departure from Oracle’s traditional enterprise focus into new markets”, said Oracle representative Sabrina Twich, “Oracle has extensive expertise in unified backbone solutions for application infrastructures…this is simply a new port to the human body combining our Business Intelligence (BI) and RDBC (Remote Direct Brain Cell) technologies.” “With this release of Oracle Exaskeleton, Oracle has redefined scalability. Software and hardware vendors had it all wrong” said the Director of Oracle Exaskeleton, “Scalability for hardware is like…um…you know…so scale-ful. No, wait…can I say that again? I didn’t get that right…Scalability is hardware-on-demand with public and private…hybrid clouds, no…<long pause>…Scalability for… nevermind, I don’t want to be in this stupid press release anyway” Releases An upcoming Oracle Exaskeleton service pack release will include a new datasheet with an extensive library of three-letter acronyms (TLAs) as well as the introduction of more four-letter acronyms (FLAs) since technologies vendors have used up almost all of the 17,576 TLA permutations (TLAPs). About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. It would be an amazing coincidence if any of this is true in some secret Oracle lab, but I doubt it. Trademarks Really…you’re still reading this? Cool! Aquaman - First Customer Ship (FCS) - Oracle Exaskeleton

  Read the article

• How to Use Steam In-Home Streaming

  - by Chris Hoffman

  Steam’s In-Home Streaming is now available to everyone, allowing you to stream PC games from one PC to another PC on the same local network. Use your gaming PC to power your laptops and home theater system. This feature doesn’t allow you to stream games over the Internet, only the same local network. Even if you tricked Steam, you probably wouldn’t get good streaming performance over the Internet. Why Stream? When you use Steam In-Home streaming, one PC sends its video and audio to another PC. The other PC views the video and audio like it’s watching a movie, sending back mouse, keyboard, and controller input to the other PC. This allows you to have a fast gaming PC power your gaming experience on slower PCs. For example, you could play graphically demanding games on a laptop in another room of your house, even if that laptop has slower integrated graphics. You could connect a slower PC to your television and use your gaming PC without hauling it into a different room in your house. Streaming also enables cross-platform compatibility. You could have a Windows gaming PC and stream games to a Mac or Linux system. This will be Valve’s official solution for compatibility with old Windows-only games on the Linux (Steam OS) Steam Machines arriving later this year. NVIDIA offers their own game streaming solution, but it requires certain NVIDIA graphics hardware and can only stream to an NVIDIA Shield device. How to Get Started In-Home Streaming is simple to use and doesn’t require any complex configuration — or any configuration, really. First, log into the Steam program on a Windows PC. This should ideally be a powerful gaming PC with a powerful CPU and fast graphics hardware. Install the games you want to stream if you haven’t already — you’ll be streaming from your PC, not from Valve’s servers. (Valve will eventually allow you to stream games from Mac OS X, Linux, and Steam OS systems, but that feature isn’t yet available. You can still stream games to these other operating systems.) Next, log into Steam on another computer on the same network with the same Steam username. Both computers have to be on the same subnet of the same local network. You’ll see the games installed on your other PC in the Steam client’s library. Click the Stream button to start streaming a game from your other PC. The game will launch on your host PC, and it will send its audio and video to the PC in front of you. Your input on the client will be sent back to the server. Be sure to update Steam on both computers if you don’t see this feature. Use the Steam > Check for Updates option within Steam and install the latest update. Updating to the latest graphics drivers for your computer’s hardware is always a good idea, too. Improving Performance Here’s what Valve recommends for good streaming performance: Host PC: A quad-core CPU for the computer running the game, minimum. The computer needs enough processor power to run the game, compress the video and audio, and send it over the network with low latency. Streaming Client: A GPU that supports hardware-accelerated H.264 decoding on the client PC. This hardware is included on all recent laptops and PCs. Ifyou have an older PC or netbook, it may not be able to decode the video stream quickly enough. Network Hardware: A wired network connection is ideal. You may have success with wireless N or AC networks with good signals, but this isn’t guaranteed. Game Settings: While streaming a game, visit the game’s setting screen and lower the resolution or turn off VSync to speed things up. In-Home Steaming Settings: On the host PC, click Steam > Settings and select In-Home Streaming to view the In-Home Streaming settings. You can modify your streaming settings to improve performance and reduce latency. Feel free to experiment with the options here and see how they affect performance — they should be self-explanatory. Check Valve’s In-Home Streaming documentation for troubleshooting information. You can also try streaming non-Steam games. Click Games > Add a Non-Steam Game to My Library on your host PC and add a PC game you have installed elsewhere on your system. You can then try streaming it from your client PC. Valve says this “may work but is not officially supported.” Image Credit: Robert Couse-Baker on Flickr, Milestoned on Flickr

  Read the article

• How to Sync Your Media Across Your Entire House with XBMC

  - by Jason Fitzpatrick

  XBMC is an awesome media center solution but when you’re using it all over your house your library updates and watched-media lists get out of sync. Read on as we show how to keep all your media centers on the same page. Note: This how-to guide was originally published in September of 2011 and detailed how to set up whole-house media syncing for XBMC “Dharma” 10.0. We’ve updated the guide for the newer, more user-friendly MySQL integration included in XBMC “Eden” 11.0.  How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

  Read the article

• How to Force Graphics Options in PC Games with NVIDIA, AMD, or Intel Graphics

  - by Chris Hoffman

  PC games usually have built-in graphics options you can change. But you’re not limited to the options built into games — the graphics control panels bundled with graphics drivers allow you to tweak options from outside PC games. For example, these tools allow you to force-enabling antialiasing to make old games look better, even if they don’t normally support it. You can also reduce graphics quality to get more performance on slow hardware. If You Don’t See These Options If you don’t have the NVIDIA Control Panel, AMD Catalyst Control Center, or Intel Graphics and Media Control Panel installed, you may need to install the appropriate graphics driver package for your hardware from the hardware manufacturer’s website. The drivers provided via Windows Update don’t include additional software like the NVIDIA Control Panel or AMD Catalyst Control Center. Drivers provided via Windows Update are also more out of date. If you’re playing PC games, you’ll want to have the latest graphics drivers installed on your system. NVIDIA Control Panel The NVIDIA Control Panel allows you to change these options if your computer has NVIDIA graphics hardware. To launch it, right-click your desktop background and select NVIDIA Control Panel. You can also find this tool by performing a Start menu (or Start screen) search for NVIDIA Control Panel or by right-clicking the NVIDIA icon in your system tray and selecting Open NVIDIA Control Panel. To quickly set a system-wide preference, you could use the Adjust image settings with preview option. For example, if you have old hardware that struggles to play the games you want to play, you may want to select “Use my preference emphasizing” and move the slider all the way to “Performance.” This trades graphics quality for an increased frame rate. By default, the “Use the advanced 3D image settings” option is selected. You can select Manage 3D settings and change advanced settings for all programs on your computer or just for specific games. NVIDIA keeps a database of the optimal settings for various games, but you’re free to tweak individual settings here. Just mouse-over an option for an explanation of what it does. If you have a laptop with NVIDIA Optimus technology — that is, both NVIDIA and Intel graphics — this is the same place you can choose which applications will use the NVIDIA hardware and which will use the Intel hardware. AMD Catalyst Control Center AMD’s Catalyst Control Center allows you to change these options on AMD graphics hardware. To open it, right-click your desktop background and select Catalyst Control Center. You can also right-click the Catalyst icon in your system tray and select Catalyst Control Center or perform a Start menu (or Start screen) search for Catalyst Control Center. Click the Gaming category at the left side of the Catalyst Control Center window and select 3D Application Settings to access the graphics settings you can change. The System Settings tab allows you to configure these options globally, for all games. Mouse over any option to see an explanation of what it does. You can also set per-application 3D settings and tweak your settings on a per-game basis. Click the Add option and browse to a game’s .exe file to change its options. Intel Graphics and Media Control Panel Intel integrated graphics is nowhere near as powerful as dedicated graphics hardware from NVIDIA and AMD, but it’s improving and comes included with most computers. Intel doesn’t provide anywhere near as many options in its graphics control panel, but you can still tweak some common settings. To open the Intel graphics control panel, locate the Intel graphics icon in your system tray, right-click it, and select Graphics Properties. You can also right-click the desktop and select Graphics Properties. Select either Basic Mode or Advanced Mode. When the Intel Graphics and Media Control Panel appears, select the 3D option. You’ll be able to set your Performance or Quality setting by moving the slider around or click the Custom Settings check box and customize your Anisotropic Filtering and Vertical Sync preference. Different Intel graphics hardware may have different options here. We also wouldn’t be surprised to see more advanced options appear in the future if Intel is serious about competing in the PC graphics market, as they say they are. These options are primarily useful to PC gamers, so don’t worry about them — or bother downloading updated graphics drivers — if you’re not a PC gamer and don’t use any intensive 3D applications on your computer. Image Credit: Dave Dugdale on Flickr     

  Read the article

• User Productivity Kit - Powerful Packages (Part 2)

  - by [email protected]

  In my first post on packages I described what a package is and how it can be used. I also started explaining some of the considerations that should be taken into account when determining how to arrange your packages. The first is when the files are interrelated and depend on one another such as an HTML file and it's graphics. A second consideration is how the files are used in your outlines. Let's say you're using a dozen Word doc files. You could place them all in a single package or put each Word doc file in a separate package but what's the right thing to do? There are several factors that will influence your decision. To understand the first, let me explain a function of UPK publishing. Take an outline in UPK that has an attachment (concept, frame link, or hyperlink) that points to a file in a package. When you publish this outline, the publishing engine will determine that there is a link to a file in the package and copy the contents of the package to the publishing destination directory. This is done to ensure that any interrelated files are kept together. For the situation where you have an HTML file with links to number of graphics files, this is a good thing. If, however, the package has a dozen unrelated Word doc files and you link to only one of them, all dozen Word documents will be copied to the publishing destination directory.  Whether or not this is a good thing is dependent on two things. First, are all of the files in the package used in the outline that you're publishing? Take an outline that includes links to all of the Word documents in that dozen document package I described earlier. For this situation, you may choose to keep all the files in a single package for convenience. A second consideration is how your organization leverages reuse in UPK. In this context, I'm referring to the link style of reuse such as when you link to the same topic from multiple UPK outlines and changes to the topic appear in both places. Take an example where you have the earlier mentioned dozen Word document package and an outline with a dozen topics in it. Each topic has an attachment pointing to one of the Word documents in the package (frame link, concept, etc.) If you're only publishing this outline, the single package probably works fine but what if you're reusing one of these topics in another outline? As I explained earlier, linking to one file in the package will result in all files in the package being copied to your published output. In this example, linking to one topic in the first outline will result in all dozen Word documents being copied to the published output. This may result in files in the output that you don't want there for business or size reasons. This is a situation in which you should consider placing each of the Word documents in it's own separate package. With each document in it's own package, that link to a single document will result in only that single package and single Word document being copied to the published output. In my last post I had described that packages are documents in the UPK library. When using the multi-user version of the UPK Developer you can leverage standard library capabilities for managing the files in these packages during the development process - capabilities such as check in / check out, history, etc. When structuring your packages take into consideration how the authors are going to be adding, modifying and deleting files from the packages. A single package is a single document in the UPK library. Like any other document in the library, a single user can check out the package and edit it at a time. If you have a large number of files in a single package and these must be modified by many users, you need to consider whether this will cause problems as multiple users compete to update the same package. If the files don't depend on each other consider placing the files in separate packages to reduce contention. I hope you've enjoyed these two posts on how you can leverage the power of packages in your content. In summary, consider the following when structuring your packages: Is the asset a single, standalone file or a set of files that depend on each other? Will all the files always be used together in a single outline or may only some of the files be needed based on how the content is reused across multiple outlines? Will multiple developers need to update the files in a single package or should you break it into multiple packages to reduce contention when checking out the document? We'd like to hear from you on how you're using packages in your content. Please add your comments below! Thank you and I hope these two posts have given you additional insights into how to use packages in your content and structure them for efficient use. John Zaums Senior Director, Product Development Oracle User Productivity Kit

  Read the article

• Oracle UPK and IBM Rational Quality Manager

  - by marc.santosusso

  Did you know that you can import UPK topics into IBM Rational Quality Manager (RQM) as Test Scripts? Attached below is a ZIP of files which contains a customized style (for all supported languages) for creating spreadsheets that are compatible with IBM Rational Quality Manager, a sample IBM Rational Quality Manager mapping file, and a best practice document. UPK_Best_Practices_-_IBM_Rational_Quality_Manager_Integration.zip Extract the files and open the best practice document (PDF file) file to get started. Please note that the IBM Rational Quality Manager publishing style (the ODARC file) include with the above download was created using the customization instructions found within the UPK documentation. That said, it is not currently an "official" feature of the product, but rather an example of what can be created through style customization. Stay tuned for more details. We hope that you find this to be useful and welcome your feedback!

  Read the article

• Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  - by Jason Fitzpatrick

  If you’re currently using any 64-bit version of Windows you may have noticed there are two “Program Files” folders, one for 64-bit and one for 32-bit apps. Why does Windows need to sub-divide them? Read on to see why. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• Is there a language where collections can be used as objects without altering the behavior?

  - by Dokkat

  Is there a language where collections can be used as objects without altering the behavior? As an example, first, imagine those functions work: function capitalize(str) //suppose this *modifies* a string object capitalizing it function greet(person): print("Hello, " + person) capitalize("pedro") >> "Pedro" greet("Pedro") >> "Hello, Pedro" Now, suppose we define a standard collection with some strings: people = ["ed","steve","john"] Then, this will call toUpper() on each object on that list people.toUpper() >> ["Ed","Steve","John"] And this will call greet once for EACH people on the list, instead of sending the list as argument greet(people) >> "Hello, Ed" >> "Hello, Steve" >> "Hello, John"

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >