Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 26/176 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• Displaylink USB show "Logo / Loading" on monitor

  - by Ken Le

  I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

  Read the article

• unmet dependencies updating Intel graphics driver

  - by Nick Jacobs

  I am trying to update my graphics driver by running: sudo apt-get install xserver-xorg-video-intel But I keep getting this message: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: xserver-xorg-video-intel : Depends: xorg-video-abi-11 E: Unable to correct problems, you have held broken packages. When I run: sudo apt-get install -f Nothing happens, because the program doesn't even get half way to installing. I am running Lubuntu 12.04 on a HP Mini 110 netbook. I have tried changing to several different ppa's but that doesn't work. I want to update my driver so that my mouse stops flickering and ScummVM stops flickering every minute.

  Read the article

• How to use driver for printer?

  - by jamie

  I've been trying to get my Lexmark x1290 to work on Ubuntu 12.04. According to this post, the z600 driver should work to print, so I downloaded the z600 driver from here and installed it through the Ubuntu Software Center. I plugged in my printer and went to the "Printer" section under System Settings... and followed the wizard to install it. It showed up as "1200-series" but never gave me a choice to choose the driver and when I try to print to it, it pops up a message that it is printing and then that it is done printing, but it is definitely not printing anything. What am I doing wrong here?

  Read the article

• Fingerprint driver issue hp Pavillion dm4

  - by user108226

  I need a fingerprint scan driver for Pavilion dm4 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0a5c:21e3 Broadcom Corp. Bus 001 Device 004: ID 138a:0018 Validity Sensors, Inc. Bus 002 Device 003: ID 10f1:1a2e Importek

  Read the article

• Nivida driver install

  - by Adham

  tried black listing and every thing i could find on the internet used with root and alt+ctrl+f1 with no solution nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Mon Jun 17 08:35:25 2013 installer version: 319.23 PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin nvidia-installer command line: ./nvidia-installer Using: nvidia-installer ncurses user interface -> License accepted. -> Installing NVIDIA driver version 319.23. -> Running distribution scripts executing: '/usr/lib/nvidia/pre-install'... -> done. -> The distribution-provided pre-install script failed! Continue installation anyway? (Answer: Yes) ERROR: The Nouveau kernel driver is currently in use by your system. This driver is incompatible with the NVIDIA driver, and must be disabled before proceeding. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver. WARNING: One or more modprobe configuration files to disable Nouveau are already present at: /etc/modprobe.d/nvidia-installer-disable-nouveau.conf. Please be sure you have rebooted your system since these files were written. If you have rebooted, then Nouveau may be enabled for other reasons, such as being included in the system initial ramdisk or in your X configuration file. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.

  Read the article

• Fixing Mobility Radeon HD3650 driver in 12.04 LTS

  - by Kevin

  Okay, I know the subject has been discussed many times, but i dont find any of the instructions working. Most promising guide was here https://launchpad.net/~makson96/+archive/fglrx ive also tried https://help.ubuntu.com/community/BinaryDriverHowto/ATI because since the driver installation was written on other sites as well, this page included a "patch" file, but since im unaware how to patch installations, im out of luck. If i understand correctly, the patch should fix the driver and eliminate constant error messages. My system is 64bit 12.04 LTS and card is Mobility Radeon HD3650. Usual installation of the driver results in weird display resoulution (1100x something, while it should be 1440x900) and even 3d games did not work. Can anyone give me any more pointers? Much appreciated!

  Read the article

• Wireless Lan driver for Toshiba Satellite C850-A823 PSKCCV-02300XAR

  - by user111942

  I have Toshiba Satellite C850-A823 PSKCCV-02300XAR Laptop, i had installed Ubuntu 12.10 as dual boot (windows 7 already working), after the installation i had noticed that wireless driver not installed in ubuntu 12.10, from windows device manager i got details of wireless lan driver as follows "Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC" i dont have LAN cable connection, kindly help me how to get wireless driver and install in ubuntu 12.10 hoping for your kind support shiyas

  Read the article

• Which ATI driver version Ubuntu 10.04 LTS used?

  - by Jack

  I have a trouble with ATI driver with Ubuntu 12.04 LTS. When I install ATI driver in Ubuntu 12.04 via "Additional Driver", then I can't shutdown Ubuntu, it showed blank (black) screen and my laptop still run. Sometimes, my screen like that: http://www.youtube.com/watch?v=U9_iygesbBM But when I install Ubuntu 10.04 and install ATI driver via "Additional Driver", it's very good and no trouble I've seen. It's sweet but 10.04 is old and is supported to 4/2013. So I want to know why Ubuntu 10.04 works good better than 12.04 with ATI driver (in my case)?

  Read the article

• How can I correct the paper size (A4) for Canon i560 printer for 12.04?

  - by Peter

  How can I correct the paper size (A4) for Canon i560 printer for 12.04? Canon i560-Paper size error-with printer driver for Ubuntu 12.04 Precise Pangolin offers the same problem, but the answers are not very helpful/elegant to me. Especially the second is far too imprecise and the dimensions for A4 suggested there do not seem to be correct as they do not match with any other (and correctly working) A-Size dimensions. My i560.ppd has for A4 a length of [842] which is then the width for A3 throughout the ppd-file. A3 printouts are fine (So just the way it should be). A4 are not. Cannot figure out why.

  Read the article

• How do I install the driver for my Linksys AE1200 Wireless-N USB Adapter?

  - by Lewis Graham

  I recently downloaded Ubuntu from the main website with the hopes of dual booting it with Windows. While the operating system works, it says that I need to install a driver for my graphics card. When I type in my password the installation fails. I figure it is because I need Internet access. I tried to install my WiFi USB adapter with the installation disc but Ubuntu doesn't seem to run the setup when I click the exe. What are my available solutions as I would really like to use Ubuntu from my programming and Windows for my gaming needs? The name as read on the box is: Linksys AE1200 Wireless- N USB Adapter The description reads as such: ID 13b1:0039 Linksys (a comma messed up format) ID 046d:0a0b Logitech, Inc. ClearChat Pro USB (headset)

  Read the article

• How do I get my HP M1132 printer to work?

  - by Lucas

  I connected my printer to the computer and Ubuntu 12.04recognized it and installed it, but when I try to print something, the printer just gives a signal as if the document had already been printed and nothing happens, and at the printing queue the job is still there as "Processing - Not Connected?" or "Stopped". The printer is working fine on Microsoft Windows and I am sure it is connected. In the status field in the printer properties, it says: Processing - /usr/lib/cups/filter/hpcups failed. I'd like someone to please teach me how to get this printer (and it's scanner) working on Ubuntu.

  Read the article

• Has the Ubuntu heating problem for Sony Vaio users been solved?

  - by nischayn22

  I use Sony Vaio VPCEA23en with graphics card ATI Radeon HD 5145 and have been using Ubuntu 11.10 and recently upgraded to 12.04 beta, however the problem of overheating (60-70) still persists. I have installed the graphics driver properly. Are there some features of Ubuntu that cause this problem? I would have no problem uninstalling them; Or will using a lighter version of Ubuntu (lubuntu) solve this problem? Right now I am using Win7 and would like to switch to Ubuntu ASAP.

  Read the article

• I cannot see the drives on my computer

  - by Joseph

  I'm a new Ubuntu user and I installed this Ubuntu 12.04 fromn a usb stick. It all went fine(I think) but as I notice, there are no drives shown on the menu. I tried some command in the terminal to see if the drives are available and yes, they are available. My problem is how to make these drives show up on the menu above. Sorry if this question is somewhat vague. (I removed the image because I am not allowed to add an image because I have insufficient reputation)

  Read the article

• Wireless Very slow with 13.10 and BCM4313

  - by RyanCheu

  I have a laptop with the BCM4313, and it was working perfectly in Ubuntu 13.04, but I recently upgraded to 13.10 and now my wireless performance is horrible. Initially it didn't work at all, but I removed the wl driver and use the brcmsmac driver instead. Now when I boot up it works at the start, but gets progressively slower. My Android device is reporting 10Mbps down/20Mbps up, but my laptop only gets 1up/down. Does anyone know a solution? I really need my wireless to work, is my best option to just reinstall on 13.04? Thanks!

  Read the article

• Ubuntu 12.10 Help! Everything is incredibly slow

  - by Keith

  I installed 12.10 from usb onto this machine. Intel celeron 2.00 GHz 496MB RAM I had to modify GNU-Grub to read "nomodeset" or i could not see the GUI. I have an Nvidia graphics card. Takes about 2 minutes to boot. The icons on the left of desktop take about 1 min to slowly open their menu. Have a network connection but mozilla is 404 and i cannot update. Where can i find a blow by blow explanation for troubleshooting and repairing this problem?

  Read the article

• ATI Radeon XPress 1200 Graphics Card Driver Install Problems

  - by 16trohrt

  I've got an ATI Radeon XPress 1200 Graphics Card, and the default driver isn't cutting it. I downloaded the proprietary driver .run file ("ati-driver-installer-9-3-x86.x86_64.run") from AMD, and tried to run it with sudo sh ati-driver-installer-9-3-x86.x86_64.run. Everytime I try and to it I get this error: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:3.8.0-25-generic; make sure that the version is being correctly set by --iscurrentdistro I don't know what's throwing it, and I would really appreciate some help. Thanks in advance! :)

  Read the article

• PS2 keyboard scroll wheel doesn't show up on xev, how to make it work?

  - by ncomx

  I have a ps2 keyboard that has a scroll wheel on the side, it doesn't work on Ubuntu 12.04 so I though to just check xev and map the correct key. But xev doesn't show up anything when moving the scroll wheel. The keyboard is this one (A4Tech KBS-26), it works fine on Windows without adding any extra driver. On linux most buttons work, multimedia, calculator, browser, etc. The only thing that doesn't work is the scroll wheel and copy/paste/cut/undo buttons, and they don't show up on xev either. Does someone knows how to make it work?

  Read the article

• My computer will not reboot after fresh install of ubuntu 12.04LTS

  - by user170715

  I bought a new computer yesterday and it came with Windows 8. When installing Ubuntu, i choose the erase and install option thinking that Ubuntu would install easily like it did for my old laptop... After a successful install and following the instructions telling me to reboot to finish installation and remove installation media. It worked and my computer booted fine, however once I began installing updates via update manager and activating additional driver {ATI/AMD proprietary FGLRX graphics driver (post-release updates)} out of the following: Experimental AMD binary Xorg driver and kernel module ATI/AMD proprietary FGLRX graphics driver (*experimental*beta) ATI/AMD proprietary FGLRX graphics driver (post-release updates) Then reboot to finish making changes I reboot and get an error (Reboot and select proper boot device) At this point I was stuck, so I eventually reinstalled ubuntu and repeated the exacted same steps until right before i rebooted to finish making changes. However this time i used this Boot Repair tool sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair After running the program i get a "boot successfully repaired" message. Then I try to reboot again and get the GNU Grub screen where it says would you like to boot: normal recovery memorytest Once it begins loading, you see the code moving across the screen then it pauses when it gets to and doesnt do anything. If someone could tell me how to fix this or get Windows 8 back soon, I'd appreciate it because like i said i just bought it yesterday and now i cant even use it.

  Read the article

• How to make LBP-1120 Canon printer work?

  - by cipricus

  Initially this question was limited to 11.10. Now I am in (Lubuntu) 12.10. (On the changes in the question see this meta question). Considering 11.10 I have tried different (or not so different) approaches - that also other users commented here. My main references were: the ubuntu official documentation website on the LBP Canon driver package, this Unixmen solution which partly refers to Radu Cotescu script that aims at providing a near-automated install, and an updated by Unixmen version of that very script (download here). None worked for me.

  Read the article

• Empty nvidia-settings after install v. 331.67 driver on Ubuntu 14.04?

  - by Victoralm

  I've followed this tutorial (with the following adjustments below) to install v. 331.67 nVidia driver. But get nvidia-settings (NVIDIA X Server Settings) empty... Then, before restart the PC, I make a xorg.conf in the nvidia-settings. The driver make Unity don't start right. So I installed nvidia-331-updates via apt-get and restarted the PC again. After that, the Unity works fine. But the nvidia-settings gets almost empty... Can someone help !?

  Read the article

• Synaptics Touchpad cannot move while pressing a key? V 8.1

  - by Corin

  my Synaptics touchpad refuses to move anytime I am pressing a key on the keyboard. I've looked everywhere on the internet telling me to go to Device Pointer Properties, then Settings, then Pointing, then Sensitivity then mess with Palm Check, but Palm Check isn't there and it isn't anywhere else. Please respond to this as this is pretty frustrating. My touchpad is Synaptics ClickPad V8.1 Would installing an older driver give me a palm check option? If so, where do I install an older one

  Read the article

• WinXp display driver incorrect to boot iso ubuntu 12.04

  - by user285829

  I have Windows Xp on a HP Pavilion w/AMD Athlon 64 processor 3300+. I have downloaded Ubuntu 12.04 iso desktop. When trying to run Ubuntu, I get a line that says "sis 630 buss not detected. It continues and makes a blue screen, then says low graphics mode only and has a white screen. The HP has display adaptor sis 760, driver= 6.14.10.3671, 4/20/2005. I'm not familiar with ubuntu because I've never got it started as yet. Can the Ubuntu install process be changed to accept my sis 760 driver? I'm trying to make a Live CD(dvd) to run Ubuntu.

  Read the article

• atheros wireless ar9285 driver

  - by nikola

  I have been having problems with wireless on Ubuntu 10 and above, Mint 11 and above. The problem is in the driver for the wireless... I can see that there is no driver installed and yet it works but reduced a lot, for example: on windows 7 ultimate 100% on distance of 1 meter (currently running) Mint Cinnamon 15 on same distance 70% when it goes under the 40 % it simply disconnects and than takes a lot of time to connect again I am new to Linux and I don't know anything about programming, yet I love the interface and look of the OS but don't want to reject it for couple of problems. There is, however, a problem with brightness control on laptop, it shows the notification and slider but with no effect The question is: Can somebody explain to me where to download and how to install the ar9285 driver for atheros wireless card laptop acer emachines eme529? or can someone explain this to me only for the LINUX MINT 15 http://www.jrhenkelmann.net/index.php?option=com_content&task=view&id=34 because the synaptic's interface is different than of mint 15 I KNOW this is Ubuntu community but the problems persist in all Linux versions

  Read the article

• Ubuntu 12.04 LTS - Black Screen at boot After changing Nvidia Driver

  - by nDman

  2 days ego i updated my Ubuntu 12.04 LTS to latest updates but i ignored Grub Updating because I thought it will clear my grub settings (I'm so noob!). After restart every things was right, the Ubuntu started normally and every things was working well except graphic which had problem before update. I had the experimental driver before but I changed it to the current-update version. After restart Ubuntu stock on black screen. I tried to reinstall Nvidia driver from recovery but it not worked. Then i used Update Grub in recovery, it not worked too but i see this line on screen at boot: at this time it stops and keyboard not working, but when I push the power button it shows these lines and it will shutdown. OK finally I made it start with older kernel (3.5.0-28-generic). Now how can I keep this kernel or fix Ubuntu to work with new kernel? Should I reinstall Nvidia driver? Which version should I use?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >