Search Results

Search found 72103 results on 2885 pages for 'file storage'.

Page 26/2885 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Copy a file to a new directory path in DOS

  - by nodmonkey

  How can I copy a file using DOS commands into a directory structure that may not yet exist? I need to be able to force the creation of the directory path to the target file location if that location doesn't already exist. For example, there is already a file.txt in this location: C:\file.txt And I want to copy it to C:\example\new\path\to\copy\of\file\file.txt but at this time C:\example\ and all the subdirectories may or may not yet exist. Basically, I am looking for a "copy and create the target path if necessary" command. What would you recommend is the best way to achieve this?

  Read the article

• Windows 2008 File Share

  - by user36540

  Hi, I have 3 Windows 2008 Standard servers in my system with no domain controller. Two of the servers are running a NLB cluster and the third server is a file server that the web servers connect to. I want to store my source code on the file server and point the IIS config to the network file share. The web sites also need access to a file share on the file server. I was able to share the network drive and access while logged into either of the web servers but my web apps are unable to access the file share - I assume due to permissions. Does anybody know the correct way to do this? Thanks, Chris

  Read the article

• Delete file then run file at startup

  - by Henry Gibson

  I'm running the music player Foobar2000 through Wine at startup. For some reason when I shutdown Ubuntu the Foobar2000 process is ended abnormally in Wine and when it runs next time I get an annoying "start in safe mode?" message. Not a huge problem, but I'd like it fixed. The safe mode message only appears if a file called "running" is present when Foobar2000 starts (if it isn't deleted when closed properly). So by deleting "running" then starting Foobar2000, the message doesn't appear. I thought it would be easy enough to enter this as a startup command, however it doesn't want to work. The command I am using is rm '/home/henry/.wine/drive_c/users/henry/Application Data/foobar2000/running';'/home/henry/.wine/drive_c/Program Files (x86)/foobar2000/foobar2000.exe' which works fine if I just run it from terminal, the file is deleted then foobar2000 runs. Does anyone know why this isn't working at startup? Also, will this run with a terminal visible? How can I make just the gui appear? Thanks

  Read the article

• How to associate all file types within Wine with its corresponding native application?

  - by MestreLion

  This is easily done for a single file type, as answered in How to associate a file type within Wine with a native application?, by creating a .reg for the desired filetype. But this is for AVI only. I use some wine apps (uTorrent, Soulseek, Eudora, to name a few) that can launch a wide range of files. Email attachments, for example, can be JPG, DOC, PDF, PPS... its impossible (and not desirable) to track down all possible file types that one may receive in an email or download in a torrent. So I neeed a solution to be more generic and broad. I need the file association to honor whatever native app is currently configured. And I want this to be done for all file types configured in my system. I've already figured out how to make the solution generic. Simply replacing the launched app in .reg for winebrowser, like this: [HKEY_CLASSES_ROOT\.pdf] @="PDFfile" "Content Type"="application/pdf" [HKEY_CLASSES_ROOT\PDFfile\Shell\Open\command] @="C:\\windows\\system32\\winebrowser.exe \"%1\"" Ive tested this and it works correctly. Since winebrowser uses xdg-open as a backend, and converts my windows path to a Unix one, the correct (Linux) app is launched. So I need a "batch" updater to wine's registry, sort of a wine-update-associations script that I can run whenever a new app is installed. Maybe a tool that can: List all Mime Types types in my system that have a default, installed app associated Extract all the needed info (glob, mime type, etc) Generate the .REG file in the above format The tricky part is: i've searched a LOT to find info about how association is done in Ubuntu 10.10 onwards, and documentation is scarce and confusing, to say the least. Freedesktop.org has no complete spec, and even Gnome docs are obsolete. So far I've gathered 4 files that contain association info, but im clueless on which (or why) to use, or how to use them to generate the .reg file: ~/.local/share/applications/mimeapps.list ~/.local/share/applications/miminfo.cache /usr/share/applications/miminfo.cache /etc/gnome/defaults.list Any help, script or explanation would be greatly appreciated! Thanks!

  Read the article

• RuntimeError: maximum recursion depth exceeded while calling a Python object

  - by Bilal Basharat

  this error arises when i try to run the following test case which is written in models.py of my django app named 'administration' : from django.test import Client, TestCase from django.core import mail class ClientTest( TestCase ): fixtures = [ 'testdata.json' ] def test_get_register( self ): response = self.client.get( '/accounts/register/', {} ) self.assertEqual( response.status_code, 200 ) the error arises at this line specifically: response = self.client.get( '/accounts/register/', {} ) my django version is 1.2.1 and python 2.6 and satchmo version is 0.9.2-pre hg-unknown. I code in windows platform(xp sp2). The command to run test case is: python manage.py test administration the complete error log is as follow: site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 101, in by_host site = Site.objects.get(domain=host) File "C:\django\django\db\models\manager.py", line 132, in get return self.get_query_set().get(*args, **kwargs) File "C:\django\django\db\models\query.py", line 336, in get num = len(clone) File "C:\django\django\db\models\query.py", line 81, in __len__ self._result_cache = list(self.iterator()) File "C:\django\django\db\models\query.py", line 269, in iterator for row in compiler.results_iter(): File "C:\django\django\db\models\sql\compiler.py", line 672, in results_iter for rows in self.execute_sql(MULTI): File "C:\django\django\db\models\sql\compiler.py", line 717, in execute_sql sql, params = self.as_sql() File "C:\django\django\db\models\sql\compiler.py", line 65, in as_sql where, w_params = self.query.where.as_sql(qn=qn, connection=self.connection) File "C:\django\django\db\models\sql\where.py", line 91, in as_sql sql, params = child.as_sql(qn=qn, connection=connection) File "C:\django\django\db\models\sql\where.py", line 94, in as_sql sql, params = self.make_atom(child, qn, connection) File "C:\django\django\db\models\sql\where.py", line 141, in make_atom lvalue, params = lvalue.process(lookup_type, params_or_value, connection) File "C:\django\django\db\models\sql\where.py", line 312, in process connection=connection, prepared=True) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\__init__.py", line 323, in get_db_prep _lookup return [self.get_db_prep_value(value, connection=connection, prepared=prepar ed)] File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) RuntimeError: maximum recursion depth exceeded while calling a Python object ---------------------------------------------------------------------- Ran 7 tests in 48.453s FAILED (errors=1) Destroying test database 'default'...

  Read the article

• Running OpenStack Icehouse with ZFS Storage Appliance

  - by Ronen Kofman

  Couple of months ago Oracle announced the support for OpenStack Cinder plugin with ZFS Storage Appliance (aka ZFSSA).  With our recent release of the Icehouse tech preview I thought it is a good opportunity to demonstrate the ZFSSA plugin working with Icehouse. One thing that helps a lot to get started with ZFSSA is that it has a VirtualBox simulator. This simulator allows users to try out the appliance’s features before getting to a real box. Users can test the functionality and design an environment even before they have a real appliance which makes the deployment process much more efficient. With OpenStack this is especially nice because having a simulator on the other end allows us to test the complete set of the Cinder plugin and check the entire integration on a single server or even a laptop. Let’s see how this works Installing and Configuring the Simulator To get started we first need to download the simulator, the simulator is available here, unzip it and it is ready to be imported to VirtualBox. If you do not already have VirtualBox installed you can download it from here according to your platform of choice. To import the simulator go to VirtualBox console File -> Import Appliance , navigate to the location of the simulator and import the virtual machine. When opening the virtual machine you will need to make the following changes: - Network – by default the network is “Host Only” , the user needs to change that to “Bridged” so the VM can connect to the network and be accessible. - Memory (optional) – the VM comes with a default of 2560MB which may be fine but if you have more memory that could not hurt, in my case I decided to give it 8192 - vCPU (optional) – the default the VM comes with 1 vCPU, I decided to change it to two, you are welcome to do so too. And here is how the VM looks like: Start the VM, when the boot process completes we will need to change the root password and the simulator is running and ready to go. Now that the simulator is up and running we can access simulated appliance using the URL https://<IP or DNS name>:215/, the IP is showing on the virtual machine console. At this stage we will need to configure the appliance, in my case I did not change any of the default (in other words pressed ‘commit’ several times) and the simulated appliance was configured and ready to go. We will need to enable REST access otherwise Cinder will not be able to call the appliance we do that in Configuration->Services and at the end of the page there is ‘REST’ button, enable it. If you are a more advanced user you can set additional features in the appliance but for the purpose of this demo this is sufficient. One final step will be to create a pool, go to Configuration -> Storage and add a pool as shown below the pool is named “default”: The simulator is now running, configured and ready for action. Configuring Cinder Back to OpenStack, I have a multi node deployment which we created according to the “Getting Started with Oracle VM, Oracle Linux and OpenStack” guide using Icehouse tech preview release. Now we need to install and configure the ZFSSA Cinder plugin using the README file. In short the steps are as follows: 1. Copy the file from here to the control node and place them at: /usr/lib/python2.6/site-packages/cinder/volume/drivers/zfssa 2. Configure the plugin, editing /etc/cinder/cinder.conf # Driver to use for volume creation (string value) #volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver volume_driver=cinder.volume.drivers.zfssa.zfssaiscsi.ZFSSAISCSIDriver zfssa_host = <HOST IP> zfssa_auth_user = root zfssa_auth_password = <ROOT PASSWORD> zfssa_pool = default zfssa_target_portal = <HOST IP>:3260 zfssa_project = test zfssa_initiator_group = default zfssa_target_interfaces = e1000g0 3. Restart the cinder-volume service: service openstack-cinder-volume restart 4. Look into the log file, this will tell us if everything works well so far. If you see any errors fix them before continuing. 5. Install iscsi-initiator-utils package, this is important since the plugin uses iscsi commands from this package: yum install -y iscsi-initiator-utils The installation and configuration are very simple, we do not need to have a “project” in the ZFSSA but we do need to define a pool. Creating and Using Volumes in OpenStack We are now ready to work, to get started lets create a volume in OpenStack and see it showing up on the simulator: #  cinder create 2 --display-name my-volume-1 +---------------------+--------------------------------------+ |       Property      |                Value                 | +---------------------+--------------------------------------+ |     attachments     |                  []                  | |  availability_zone  |                 nova                 | |       bootable      |                false                 | |      created_at     |      2014-08-12T04:24:37.806752      | | display_description |                 None                 | |     display_name    |             my-volume-1              | |      encrypted      |                False                 | |          id         | df67c447-9a36-4887-a8ff-74178d5d06ee | |       metadata      |                  {}                  | |         size        |                  2                   | |     snapshot_id     |                 None                 | |     source_volid    |                 None                 | |        status       |               creating               | |     volume_type     |                 None                 | +---------------------+--------------------------------------+ In the simulator: Extending the volume to 5G: # cinder extend df67c447-9a36-4887-a8ff-74178d5d06ee 5 In the simulator: Creating templates using Cinder Volumes By default OpenStack supports ephemeral storage where an image is copied into the run area during instance launch and deleted when the instance is terminated. With Cinder we can create persistent storage and launch instances from a Cinder volume. Booting from volume has several advantages, one of the main advantages of booting from volumes is speed. No matter how large the volume is the launch operation is immediate there is no copying of an image to a run areas, an operation which can take a long time when using ephemeral storage (depending on image size). In this deployment we have a Glance image of Oracle Linux 6.5, I would like to make it into a volume which I can boot from. When creating a volume from an image we actually “download” the image into the volume and making the volume bootable, this process can take some time depending on the image size, during the download we will see the following status: # cinder create --image-id 487a0731-599a-499e-b0e2-5d9b20201f0f --display-name ol65 2 # cinder list +--------------------------------------+-------------+--------------+------+-------------+ |                  ID                  |    Status   | Display Name | Size | Volume Type | … +--------------------------------------+-------------+--------------+------+------------- | df67c447-9a36-4887-a8ff-74178d5d06ee |  available  | my-volume-1  |  5   |     None    | … | f61702b6-4204-4f10-8bdf-7da792f15c28 | downloading |     ol65     |  2   |     None    | … +--------------------------------------+-------------+--------------+------+-------------+ After the download is complete we will see that the volume status changed to “available” and that the bootable state is “true”. We can use this new volume to boot an instance from or we can use it as a template. Cinder can create a volume from another volume and ZFSSA can replicate volumes instantly in the back end. The result is an efficient template model where users can spawn an instance from a “template” instantly even if the template is very large in size. Let’s try replicating the bootable volume with the Oracle Linux 6.5 on it creating additional 3 bootable volumes: # cinder create 2 --source-volid f61702b6-4204-4f10-8bdf-7da792f15c28 --display-name ol65-bootable-1 # cinder create 2 --source-volid f61702b6-4204-4f10-8bdf-7da792f15c28 --display-name ol65-bootable-2 # cinder create 2 --source-volid f61702b6-4204-4f10-8bdf-7da792f15c28 --display-name ol65-bootable-3 # cinder list +--------------------------------------+-----------+-----------------+------+-------------+----------+-------------+ |                  ID                  |   Status  |   Display Name  | Size | Volume Type | Bootable | Attached to | +--------------------------------------+-----------+-----------------+------+-------------+----------+-------------+ | 9bfe0deb-b9c7-4d97-8522-1354fc533c26 | available | ol65-bootable-2 |  2   |     None    |   true   |             | | a311a855-6fb8-472d-b091-4d9703ef6b9a | available | ol65-bootable-1 |  2   |     None    |   true   |             | | df67c447-9a36-4887-a8ff-74178d5d06ee | available |   my-volume-1   |  5   |     None    |  false   |             | | e7fbd2eb-e726-452b-9a88-b5eee0736175 | available | ol65-bootable-3 |  2   |     None    |   true   |             | | f61702b6-4204-4f10-8bdf-7da792f15c28 | available |       ol65      |  2   |     None    |   true   |             | +--------------------------------------+-----------+-----------------+------+-------------+----------+-------------+ Note that the creation of those 3 volume was almost immediate, no need to download or copy, ZFSSA takes care of the volume copy for us. Start 3 instances: # nova boot --boot-volume a311a855-6fb8-472d-b091-4d9703ef6b9a --flavor m1.tiny ol65-instance-1 --nic net-id=25b19746-3aea-4236-8193-4c6284e76eca # nova boot --boot-volume 9bfe0deb-b9c7-4d97-8522-1354fc533c26 --flavor m1.tiny ol65-instance-2 --nic net-id=25b19746-3aea-4236-8193-4c6284e76eca # nova boot --boot-volume e7fbd2eb-e726-452b-9a88-b5eee0736175 --flavor m1.tiny ol65-instance-3 --nic net-id=25b19746-3aea-4236-8193-4c6284e76eca Instantly replicating volumes is a very powerful feature, especially for large templates. The ZFSSA Cinder plugin allows us to take advantage of this feature of ZFSSA. By offloading some of the operations to the array OpenStack create a highly efficient environment where persistent volume can be instantly created from a template. That’s all for now, with this environment you can continue to test ZFSSA with OpenStack and when you are ready for the real appliance the operations will look the same. @RonenKofman

  Read the article

• ?Oracle Database 12c????Information Lifecycle Management ILM?Storage Enhancements

  - by Liu Maclean(???)

  Oracle Database 12c????Information Lifecycle Management ILM ?????????Storage Enhancements ???????? Lifecycle Management ILM ????????? Automatic Data Placement ??????, ??ADP? ?????? 12c???????Datafile??? Online Move Datafile, ????????????????datafile???????,??????????????? ????(12.1.0.1)Automatic Data Optimization?heat map????????: ????????? (CDB)?????Automatic Data Optimization?heat map Row-level policies for ADO are not supported for Temporal Validity. Partition-level ADO and compression are supported if partitioned on the end-time columns. Row-level policies for ADO are not supported for in-database archiving. Partition-level ADO and compression are supported if partitioned on the ORA_ARCHIVE_STATE column. Custom policies (user-defined functions) for ADO are not supported if the policies default at the tablespace level. ADO does not perform checks for storage space in a target tablespace when using storage tiering. ADO is not supported on tables with object types or materialized views. ADO concurrency (the number of simultaneous policy jobs for ADO) depends on the concurrency of the Oracle scheduler. If a policy job for ADO fails more than two times, then the job is marked disabled and the job must be manually enabled later. Policies for ADO are only run in the Oracle Scheduler maintenance windows. Outside of the maintenance windows all policies are stopped. The only exceptions are those jobs for rebuilding indexes in ADO offline mode. ADO has restrictions related to moving tables and table partitions. ??????row,segment???????????ADO??,?????create table?alter table?????? ????ADO??,??????????????,???????????????? storage tier , ?????????storage tier?????????, ??????????????ADO??????????? segment?row??group? ?CREATE TABLE?ALERT TABLE???ILM???,??????????????????ADO policy? ??ILM policy???????????????? ??????? ????ADO policy, ?????alter table  ???????,?????????????? CREATE TABLE sales_ado (PROD_ID NUMBER NOT NULL, CUST_ID NUMBER NOT NULL, TIME_ID DATE NOT NULL, CHANNEL_ID NUMBER NOT NULL, PROMO_ID NUMBER NOT NULL, QUANTITY_SOLD NUMBER(10,2) NOT NULL, AMOUNT_SOLD NUMBER(10,2) NOT NULL ) ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SQL> SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled 2 FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLED -------------------- -------------------------- -------------- P41 DATA MOVEMENT YES ALTER TABLE sales MODIFY PARTITION sales_1995 ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLE ------------------------ ------------- ------ P1 DATA MOVEMENT YES P2 DATA MOVEMENT YES /* You can disable an ADO policy with the following */ ALTER TABLE sales_ado ILM DISABLE POLICY P1; /* You can delete an ADO policy with the following */ ALTER TABLE sales_ado ILM DELETE POLICY P1; /* You can disable all ADO policies with the following */ ALTER TABLE sales_ado ILM DISABLE_ALL; /* You can delete all ADO policies with the following */ ALTER TABLE sales_ado ILM DELETE_ALL; /* You can disable an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DISABLE POLICY P2; /* You can delete an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DELETE POLICY P2; ILM ???????: ?????ILM ADP????,???????: ?????? ???? activity tracking, ????2????????,???????????????????: SEGMENT-LEVEL???????????????????? ROW-LEVEL????????,??????? ????????: 1??????? SEGMENT-LEVEL activity tracking ALTER TABLE interval_sales ILM  ENABLE ACTIVITY TRACKING SEGMENT ACCESS ???????INTERVAL_SALES??segment level  activity tracking,?????????????????? 2? ??????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING (CREATE TIME , WRITE TIME); 3????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING  (READ TIME); ?12.1.0.1.0?????? ??HEAT_MAP??????????, ?????system??session?????heap_map????????????? ?????????HEAT MAP??,? ALTER SYSTEM SET HEAT_MAP = ON; ?HEAT MAP??????,??????????????????????????  ??SYSTEM?SYSAUX????????????? ???????HEAT MAP??: ALTER SYSTEM SET HEAT_MAP = OFF; ????? HEAT_MAP????, ?HEAT_MAP??? ?????????????????????? ?HEAT_MAP?????????Automatic Data Optimization (ADO)??? ??ADO??,Heat Map ?????????? ????V$HEAT_MAP_SEGMENT ??????? HEAT MAP?? SQL> select * from V$heat_map_segment; no rows selected SQL> alter session set heat_map=on; Session altered. SQL> select * from scott.emp; EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- 7369 SMITH CLERK 7902 17-DEC-80 800 20 7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30 7566 JONES MANAGER 7839 02-APR-81 2975 20 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 7782 CLARK MANAGER 7839 09-JUN-81 2450 10 7788 SCOTT ANALYST 7566 19-APR-87 3000 20 7839 KING PRESIDENT 17-NOV-81 5000 10 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 7876 ADAMS CLERK 7788 23-MAY-87 1100 20 7900 JAMES CLERK 7698 03-DEC-81 950 30 7902 FORD ANALYST 7566 03-DEC-81 3000 20 7934 MILLER CLERK 7782 23-JAN-82 1300 10 14 rows selected. SQL> select * from v$heat_map_segment; OBJECT_NAME SUBOBJECT_NAME OBJ# DATAOBJ# TRACK_TIM SEG SEG FUL LOO CON_ID -------------------- -------------------- ---------- ---------- --------- --- --- --- --- ---------- EMP 92997 92997 23-JUL-13 NO NO YES NO 0 ??v$heat_map_segment???,?v$heat_map_segment??????????????X$HEATMAPSEGMENT V$HEAT_MAP_SEGMENT displays real-time segment access information. Column Datatype Description OBJECT_NAME VARCHAR2(128) Name of the object SUBOBJECT_NAME VARCHAR2(128) Name of the subobject OBJ# NUMBER Object number DATAOBJ# NUMBER Data object number TRACK_TIME DATE Timestamp of current activity tracking SEGMENT_WRITE VARCHAR2(3) Indicates whether the segment has write access: (YES or NO) SEGMENT_READ VARCHAR2(3) Indicates whether the segment has read access: (YES or NO) FULL_SCAN VARCHAR2(3) Indicates whether the segment has full table scan: (YES or NO) LOOKUP_SCAN VARCHAR2(3) Indicates whether the segment has lookup scan: (YES or NO) CON_ID NUMBER The ID of the container to which the data pertains. Possible values include:   0: This value is used for rows containing data that pertain to the entire CDB. This value is also used for rows in non-CDBs. 1: This value is used for rows containing data that pertain to only the root n: Where n is the applicable container ID for the rows containing data The Heat Map feature is not supported in CDBs in Oracle Database 12c, so the value in this column can be ignored. ??HEAP MAP??????????????????,????DBA_HEAT_MAP_SEGMENT???????? ???????HEAT_MAP_STAT$?????? ??Automatic Data Optimization??????: ????1: SQL> alter system set heat_map=on; ?????? ????????????? scott?? http://www.askmaclean.com/archives/scott-schema-script.html SQL> grant all on dbms_lock to scott; ????? SQL> grant dba to scott; ????? @ilm_setup_basic C:\APP\XIANGBLI\ORADATA\MACLEAN\ilm.dbf @tktgilm_demo_env_setup SQL> connect scott/tiger ; ???? SQL> select count(*) from scott.employee; COUNT(*) ---------- 3072 ??? 1 ?? SQL> set serveroutput on SQL> exec print_compression_stats('SCOTT','EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 3072 Adv/basic compressed : 0 Others : 0 PL/SQL ???????? ???????3072?????? ????????? ????policy ???????????? alter table employee ilm add policy row store compress advanced row after 3 days of no modification / SQL> set serveroutput on SQL> execute list_ilm_policies; -------------------------------------------------- Policies defined for SCOTT -------------------------------------------------- Object Name------ : EMPLOYEE Subobject Name--- : Object Type------ : TABLE Inherited from--- : POLICY NOT INHERITED Policy Name------ : P1 Action Type------ : COMPRESSION Scope------------ : ROW Compression level : ADVANCED Tier Tablespace-- : Condition type--- : LAST MODIFICATION TIME Condition days--- : 3 Enabled---------- : YES -------------------------------------------------- PL/SQL ???????? SQL> select sysdate from dual; SYSDATE -------------- 29-7? -13 SQL> execute set_back_chktime(get_policy_name('EMPLOYEE',null,'COMPRESSION','ROW','ADVANCED',3,null,null),'EMPLOYEE',null,6); Object check time reset ... -------------------------------------- Object Name : EMPLOYEE Object Number : 93123 D.Object Numbr : 93123 Policy Number : 1 Object chktime : 23-7? -13 08.13.42.000000 ?? Distnt chktime : 0 -------------------------------------- PL/SQL ???????? ?policy?chktime???6??, ????set_back_chktime???????????????“????”?,?????????,???????? ?????? alter system flush buffer_cache; alter system flush buffer_cache; alter system flush shared_pool; alter system flush shared_pool; SQL> execute set_window('MONDAY_WINDOW','OPEN'); Set Maint. Window OPEN ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : TRUE ----------------------------- PL/SQL ???????? SQL> exec dbms_lock.sleep(60) ; PL/SQL ???????? SQL> exec print_compression_stats('SCOTT', 'EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 338 Adv/basic compressed : 2734 Others : 0 PL/SQL ???????? ??????????????? Adv/basic compressed : 2734 ??????? SQL> col object_name for a20 SQL> select object_id,object_name from dba_objects where object_name='EMPLOYEE'; OBJECT_ID OBJECT_NAME ---------- -------------------- 93123 EMPLOYEE SQL> execute list_ilm_policy_executions ; -------------------------------------------------- Policies execution details for SCOTT -------------------------------------------------- Policy Name------ : P22 Job Name--------- : ILMJOB48 Start time------- : 29-7? -13 08.37.45.061000 ?? End time--------- : 29-7? -13 08.37.48.629000 ?? ----------------- Object Name------ : EMPLOYEE Sub_obj Name----- : Obj Type--------- : TABLE ----------------- Exec-state------- : SELECTED FOR EXECUTION Job state-------- : COMPLETED SUCCESSFULLY Exec comments---- : Results comments- : --- -------------------------------------------------- PL/SQL ???????? ILMJOB48?????policy?JOB,?12.1.0.1??J00x???? ?MMON_SLAVE???M00x???15????????? select sample_time,program,module,action from v$active_session_history where action ='KDILM background EXEcution' order by sample_time; 29-7? -13 08.16.38.369000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.38.388000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.39.390000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.23.38.681000000 ?? ORACLE.EXE (M002) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.32.38.968000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.39.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.40.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.36.40.066000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.42.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.43.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.44.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.38.42.386000000 ?? ORACLE.EXE (M001) MMON_SLAVE KDILM background EXEcution select distinct action from v$active_session_history where action like 'KDILM%' KDILM background CLeaNup KDILM background EXEcution SQL> execute set_window('MONDAY_WINDOW','CLOSE'); Set Maint. Window CLOSE ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : FALSE ----------------------------- PL/SQL ???????? SQL> drop table employee purge ; ????? ???? ????? spool ilm_usecase_1_cleanup.lst @ilm_demo_cleanup ; spool off

  Read the article

• Hyper-V File Server Clustering - at my wit’s end

  - by René Kåbis

  I am at my wit’s end with File Server clustering under Hyper-V. I am hoping that someone might be able to help me figure out this Gordian Knot of a technology that seems to have dead ends (like forcing cluster VMs to use iSCSI drives where normally-attached VHDX drives could suffice) where logic and reason would normally provide a logical solution. My hardware: I will be running three servers (in the end), but right now everything is taking place on one server. One of the secondary servers will exist purely as a witness/quorum, and another slightly more powerful one will be acting as an emergency backup (with additional storage, just not redundant) to hold the secondary AD VM and the other halves of a set of clustered VMs: the SQL VM and the file system VM. Please note, these each are the depreciated nodes of a cluster, the main nodes will be on the most powerful first machine. My heavy lifter is a machine that also contains all of the truly redundant storage on the network. If this gives anyone the heebie-geebies, too bad. It has a 6TB (usable) RAID-10 array, and will (in the end) hold the primary nodes of both aforementioned clusters, but is right now holding all VMs. This is, right now: DC01, DC02, SQL01, SQL02, FS01 & FS02. Eventually, I will be adding additional VMs to handle Exchange, Sharepoint and Lync, but only to this main server (the secondary server won't be able to handle more than three or four VMs, so why burden it? The AD, SQL & FS VMs are the most critical for the business). If anyone is now saying, “wait, what about a SAN or a NAS for the file servers?”, well too bad. What exists on the main machine is what I have to deal with. I followed these instructions, but I seem to be unable to get things to work. In order to make the file server truly redundant, I cannot trust any one machine to hold the only data store on the network. Therefore, I have created a set of iSCSI drives on the VM-host of the main machine, and attached one to each file server VM. The end result is that I want my FS01 to sit on the heavy lifter, along with its iSCSI “drive”, and FS02 will sit on the secondary machine with its own iSCSI “drive” there as well. That is, neither iSCSI drive will end up sitting on the same machine as the other. As such, the clustered FS will utterly duplicate the contents of the iSCSI drives between each other, so that if one physical machine (or the FS VM) goes toes-up, the other has got a full copy of the data on its own iSCSI drive. My problem occurs when I try to apply the file server role within the failover cluster manager. Actually, it is even before that -- it occurs when adding the disks. Since I have added each disk preferentially to a specific VM (by limiting the initiator by DNS hostname, and by adding two-way CHAP authentication), this forces each VM to be in control of its own iSCSI disk. However, when I try to add the disks to the Disks section of Storage within Failover Cluster Manager, the entire process fails for a random disk of the pair. That is, one will get online, but the other will remain offline because it does not have the correct “owner node”. I mean, really -- WTF? Of course it doesn’t have the right owner node, both drives are showing the same node name!! I cannot seem to have one drive show up with one node name as owner, and the other drive show up with the other node name as owner. And because both drives are not “online”, I cannot create a pool to apply to a cluster role. Talk about getting stuck between a rock and a hard place! I’ve got more to add, but my work is closing for the day and I have to wrap things up. I will try to add more tomorrow morning when I get in. My main objective is to have a file server VM on each machine, the storage on each machine, but a transparent failover in case one physical machine fails. Essentially, a failover FS that doesn’t care which machine fails -- the storage contents are replicated equally on each machine. Am I even heading in the right direction?

  Read the article

• Program for remove exact duplicate files while caching search results

  - by John Thomas

  We need a Windows 7 program to remove/check the duplicates but our situation is somewhat different than the standard one for which there are enough programs. We have a fairly large static archive (collection) of photos spread on several disks. Let's call them Disk A..M. We have also some disks (let's call them Disk 1..9) which contain some duplicates which are to be found on disks A..M. We want to add to our collection new disks (N, O, P... aso.) which will contain the photos from disks 1..9 but, of course, we don't want to have any photos two (or more) times. Of course, theoretically, the task can be solved with a regular file duplicate remover but the time needed will be very big. Ideally, AFAIS now, the real solution would be a program which will scan the disks A..M, store the file sizes/hashes of the photos in an indexed database/file(s) and will check the new disks (1..9) against this database. However I have hard time to find such a program (if exists). Other things to note: we consider that the Disks A..M (the collection) doesn't have any duplicates on them the file names might be changed we aren't interested in approximated (fuzzy) comparison which can be found in some photo comparing programs. We hunt for exact duplicate files. we aren't afraid of command line. :-) we need to work on Win7/XP we prefer (of course) to be freeware TIA for any suggestions, John Th.

  Read the article

• How to organise storage for media content such as video and music?

  - by thor

  Currently, we have a single server hosting all content: music, video and software. This content is downloaded by users through HTTP. Now free space is coming to an end and we are exploring different ways of extending our storage capacity. We want to do it cheap, simple and reliable (protected from disk/ server faults). Currenly, we see two ways: Add a couple of cheap servers with 4 disks (RAID1 ?), run some distributed file-system on top, like GlusterFS. Pros: hopefully, we will see all our disks as single flat file system, just dump content into it and be done. Cons: could be tricky in configuration and handling of faults. Add a couple of cheap servers, all running HTTP servers. Each piece of content (be it a music file or video) is placed on randomly selected two servers. Pros: don't have to deal with RAID, as content is duplicated; single server failure does not bring down any part of content; doubled distribution capacity (as any signle file could be downloaded from any of two servers hosting it). Cons: requires some scripting on part of distribution of content, adding/ removing servers. Do we miss any other ways? Which of the aforementioned options seems to be the best?

  Read the article

• Create and Share a File (Also a mysterious error)

  - by Kirk

  My goal is to create a XML file and then send it through the share Intent. I'm able to create a XML file using this code FileOutputStream outputStream = context.openFileOutput(fileName, Context.MODE_WORLD_READABLE); PrintStream printStream = new PrintStream(outputStream); String xml = this.writeXml(); // get XML here printStream.println(xml); printStream.close(); I'm stuck trying to retrieve a Uri to the output file in order to share it. I first tried to access the file by converting the file to a Uri File outFile = context.getFileStreamPath(fileName); return Uri.fromFile(outFile); This returns file:///data/data/com.my.package/files/myfile.xml but I cannot appear to attach this to an email, upload, etc. If I manually check the file length, it's proper and shows there is a reasonable file size. Next I created a content provider and tried to reference the file and it isn't a valid handle to the file. The ContentProvider doesn't ever seem to be called a any point. Uri uri = Uri.parse("content://" + CachedFileProvider.AUTHORITY + "/" + fileName); return uri; This returns content://com.my.package.provider/myfile.xml but I check the file and it's zero length. How do I access files properly? Do I need to create the file with the content provider? If so, how? Update Here is the code I'm using to share. If I select Gmail, it does show as an attachment but when I send it gives an error Couldn't show attachment and the email that arrives has no attachment. public void onClick(View view) { Log.d(TAG, "onClick " + view.getId()); switch (view.getId()) { case R.id.share_cancel: setResult(RESULT_CANCELED, getIntent()); finish(); break; case R.id.share_share: MyXml xml = new MyXml(); Uri uri; try { uri = xml.writeXmlToFile(getApplicationContext(), "myfile.xml"); //uri is "file:///data/data/com.my.package/files/myfile.xml" Log.d(TAG, "Share URI: " + uri.toString() + " path: " + uri.getPath()); File f = new File(uri.getPath()); Log.d(TAG, "File length: " + f.length()); // shows a valid file size Intent shareIntent = new Intent(); shareIntent.setAction(Intent.ACTION_SEND); shareIntent.putExtra(Intent.EXTRA_STREAM, uri); shareIntent.setType("text/plain"); startActivity(Intent.createChooser(shareIntent, "Share")); } catch (FileNotFoundException e) { e.printStackTrace(); } break; } } I noticed that there is an Exception thrown here from inside createChooser(...), but I can't figure out why it's thrown. E/ActivityThread(572): Activity com.android.internal.app.ChooserActivity has leaked IntentReceiver com.android.internal.app.ResolverActivity$1@4148d658 that was originally registered here. Are you missing a call to unregisterReceiver()? I've researched this error and can't find anything obvious. Both of these links suggest that I need to unregister a receiver. Chooser Activity Leak - Android Why does Intent.createChooser() need a BroadcastReceiver and how to implement? I have a receiver setup, but it's for an AlarmManager that is set elsewhere and doesn't require the app to register / unregister. Code for openFile(...) In case it's needed, here is the content provider I've created. public ParcelFileDescriptor openFile(Uri uri, String mode) throws FileNotFoundException { String fileLocation = getContext().getCacheDir() + "/" + uri.getLastPathSegment(); ParcelFileDescriptor pfd = ParcelFileDescriptor.open(new File(fileLocation), ParcelFileDescriptor.MODE_READ_ONLY); return pfd; }

  Read the article

• SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress

  - by pinaldave

  One of the most common data integration tasks I run into is a desire to move data from a file into a database table.  Generally the user is familiar with his data, the structure of the file, and the database table, but is unfamiliar with data integration tools and therefore views this task as something that is difficult.  What these users really need is a point and click approach that minimizes the learning curve for the data integration tool.  This is what CSVexpress (www.CSVexpress.com) is all about!  It is based on expressor Studio, a data integration tool I’ve been reviewing over the last several months. With CSVexpress, moving data between data sources can be as simple as providing the database connection details, describing the structure of the incoming and outgoing data and then connecting two pre-programmed operators.   There’s no need to learn the intricacies of the data integration tool or to write code.  Let’s look at an example. Suppose I have a comma separated value data file with data similar to the following, which is a listing of terminated employees that includes their hiring and termination date, department, job description, and final salary. EMP_ID,STRT_DATE,END_DATE,JOB_ID,DEPT_ID,SALARY 102,13-JAN-93,24-JUL-98 17:00,Programmer,60,"$85,000" 101,21-SEP-89,27-OCT-93 17:00,Account Representative,110,"$65,000" 103,28-OCT-93,15-MAR-97 17:00,Account Manager,110,"$75,000" 304,17-FEB-96,19-DEC-99 17:00,Marketing,20,"$45,000" 333,24-MAR-98,31-DEC-99 17:00,Data Entry Clerk,50,"$35,000" 100,17-SEP-87,17-JUN-93 17:00,Administrative Assistant,90,"$40,000" 334,24-MAR-98,31-DEC-98 17:00,Sales Representative,80,"$40,000" 400,01-JAN-99,31-DEC-99 17:00,Sales Manager,80,"$55,000" Notice the concise format used for the date values, the fact that the termination date includes both date and time information, and that the salary is clearly identified as money by the dollar sign and digit grouping.  In moving this data to a database table I want to express the dates using a format that includes the century since it’s obvious that this listing could include employees who left the company in both the 20th and 21st centuries, and I want the salary to be stored as a decimal value without the currency symbol and grouping character.  Most data integration tools would require coding within a transformation operation to effect these changes, but not expressor Studio.  Directives for these modifications are included in the description of the incoming data. Besides starting the expressor Studio tool and opening a project, the first step is to create connection artifacts, which describe to expressor where data is stored.  For this example, two connection artifacts are required: a file connection, which encapsulates the file system location of my file; and a database connection, which encapsulates the database connection information.  With expressor Studio, I use wizards to create these artifacts. First click New Connection > File Connection in the Home tab of expressor Studio’s ribbon bar, which starts the File Connection wizard.  In the first window, I enter the path to the directory that contains the input file.  Note that the file connection artifact only specifies the file system location, not the name of the file. Then I click Next and enter a meaningful name for this connection artifact; clicking Finish closes the wizard and saves the artifact. To create the Database Connection artifact, I must know the location of, or instance name, of the target database and have the credentials of an account with sufficient privileges to write to the target table.  To use expressor Studio’s features to the fullest, this account should also have the authority to create a table. I click the New Connection > Database Connection in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  expressor Studio includes high-performance drivers for many relational database management systems, so I can simply make a selection from the “Supplied database drivers” drop down control.  If my desired RDBMS isn’t listed, I can optionally use an existing ODBC DSN by selecting the “Existing DSN” radio button. In the following window, I enter the connection details.  With Microsoft SQL Server, I may choose to use Windows Authentication rather than rather than account credentials.  After clicking Next, I enter a meaningful name for this connection artifact and clicking Finish closes the wizard and saves the artifact. Now I create a schema artifact, which describes the structure of the file data.  When expressor reads a file, all data fields are typed as strings.  In some use cases this may be exactly what is needed and there is no need to edit the schema artifact.  But in this example, editing the schema artifact will be used to specify how the data should be transformed; that is, reformat the dates to include century designations, change the employee and job ID’s to integers, and convert the salary to a decimal value. Again a wizard is used to create the schema artifact.  I click New Schema > Delimited Schema in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  In the first window, I click Get Data from File, which then displays a listing of the file connections in the project.  When I click on the file connection I previously created, a browse window opens to this file system location; I then select the file and click Open, which imports 10 lines from the file into the wizard. I now view the file’s content and confirm that the appropriate delimiter characters are selected in the “Field Delimiter” and “Record Delimiter” drop down controls; then I click Next. Since the input file includes a header row, I can easily indicate that fields in the file should be identified through the corresponding header value by clicking “Set All Names from Selected Row. “ Alternatively, I could enter a different identifier into the Field Details > Name text box.  I click Next and enter a meaningful name for this schema artifact; clicking Finish closes the wizard and saves the artifact. Now I open the schema artifact in the schema editor.  When I first view the schema’s content, I note that the types of all attributes in the Semantic Type (the right-hand panel) are strings and that the attribute names are the same as the field names in the data file.  To change an attribute’s name and type, I highlight the attribute and click Edit in the Attributes grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Attribute window; I can change the attribute name and select the desired type from the “Data type” drop down control.  In this example, I change the name of each attribute to the name of the corresponding database table column (EmployeeID, StartingDate, TerminationDate, JobDescription, DepartmentID, and FinalSalary).  Then for the EmployeeID and DepartmentID attributes, I select Integer as the data type, for the StartingDate and TerminationDate attributes, I select Datetime as the data type, and for the FinalSalary attribute, I select the Decimal type. But I can do much more in the schema editor.  For the datetime attributes, I can set a constraint that ensures that the data adheres to some predetermined specifications; a starting date must be later than January 1, 1980 (the date on which the company began operations) and a termination date must be earlier than 11:59 PM on December 31, 1999.  I simply select the appropriate constraint and enter the value (1980-01-01 00:00 as the starting date and 1999-12-31 11:59 as the termination date). As a last step in setting up these datetime conversions, I edit the mapping, describing the format of each datetime type in the source file. I highlight the mapping line for the StartingDate attribute and click Edit Mapping in the Mappings grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Mapping window in which I either enter, or select, a format that describes how the datetime values are represented in the file.  Note the use of Y01 as the syntax for the year.  This syntax is the indicator to expressor Studio to derive the century by setting any year later than 01 to the 20th century and any year before 01 to the 21st century.  As each datetime value is read from the file, the year values are transformed into century and year values. For the TerminationDate attribute, my format also indicates that the datetime value includes hours and minutes. And now to the Salary attribute. I open its mapping and in the Edit Mapping window select the Currency tab and the “Use currency” check box.  This indicates that the file data will include the dollar sign (or in Europe the Pound or Euro sign), which should be removed. And on the Grouping tab, I select the “Use grouping” checkbox and enter 3 into the “Group size” text box, a comma into the “Grouping character” text box, and a decimal point into the “Decimal separator” character text box. These entries allow the string to be properly converted into a decimal value. By making these entries into the schema that describes my input file, I’ve specified how I want the data transformed prior to writing to the database table and completely removed the requirement for coding within the data integration application itself. Assembling the data integration application is simple.  Onto the canvas I drag the Read File and Write Table operators, connecting the output of the Read File operator to the input of the Write Table operator. Next, I select the Read File operator and its Properties panel opens on the right-hand side of expressor Studio.  For each property, I can select an appropriate entry from the corresponding drop down control.  Clicking on the button to the right of the “File name” text box opens the file system location specified in the file connection artifact, allowing me to select the appropriate input file.  I indicate also that the first row in the file, the header row, should be skipped, and that any record that fails one of the datetime constraints should be skipped. I then select the Write Table operator and in its Properties panel specify the database connection, normal for the “Mode,” and the “Truncate” and “Create Missing Table” options.  If my target table does not yet exist, expressor will create the table using the information encapsulated in the schema artifact assigned to the operator. The last task needed to complete the application is to create the schema artifact used by the Write Table operator.  This is extremely easy as another wizard is capable of using the schema artifact assigned to the Read Table operator to create a schema artifact for the Write Table operator.  In the Write Table Properties panel, I click the drop down control to the right of the “Schema” property and select “New Table Schema from Upstream Output…” from the drop down menu. The wizard first displays the table description and in its second screen asks me to select the database connection artifact that specifies the RDBMS in which the target table will exist.  The wizard then connects to the RDBMS and retrieves a list of database schemas from which I make a selection.  The fourth screen gives me the opportunity to fine tune the table’s description.  In this example, I set the width of the JobDescription column to a maximum of 40 characters and select money as the type of the LastSalary column.  I also provide the name for the table. This completes development of the application.  The entire application was created through the use of wizards and the required data transformations specified through simple constraints and specifications rather than through coding.  To develop this application, I only needed a basic understanding of expressor Studio, a level of expertise that can be gained by working through a few introductory tutorials.  expressor Studio is as close to a point and click data integration tool as one could want and I urge you to try this product if you have a need to move data between files or from files to database tables. Check out CSVexpress in more detail.  It offers a few basic video tutorials and a preview of expressor Studio 3.5, which will support the reading and writing of data into Salesforce.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• ZFS/Btrfs/LVM2-like storage with advanced features on Linux?

  - by Easter Sunshine

  I have 3 identical internal 7200 RPM SATA hard disk drives on a Linux machine. I'm looking for a storage set-up that will give me all of this: Different data sets (filesystems or subtrees) can have different RAID levels so I can choose performance, space overhead, and risk trade-offs differently for different data sets while having a few number of physical disks (very important data can be 3xRAID1, important data can be 3xRAID5, unimportant reproducible data can be 3xRAID0). If each data set has an explicit size or size limit, then the ability to grow and shrink the size limit (offline if need be) Avoid out-of-kernel modules R/W or read-only COW snapshots. If it's a block-level snapshots, the filesystem should be synced and quiesced during a snapshot. Ability to add physical disks and then grow/redistribute RAID1, RAID5, and RAID0 volumes to take advantage of the new spindle and make sure no spindle is hotter than the rest (e.g., in NetApp, growing a RAID-DP raid group by a few disks will not balance the I/O across them without an explicit redistribution) Not required but nice-to-haves: Transparent compression, per-file or subtree. Even better if, like NetApps, analyzes the data first for compressibility and only compresses compressible data Deduplication that doesn't have huge performance penalties or require obscene amounts of memory (NetApp does scheduled deduplication on weekends, which is good) Resistance to silent data corruption like ZFS (this is not required because I have never seen ZFS report any data corruption on these specific disks) Storage tiering, either automatic (based on caching rules) or user-defined rules (yes, I have all-identical disks now but this will let me add a read/write SSD cache in the future). If it's user-defined rules, these rules should have the ability to promote to SSD on a file level and not a block level. Space-efficient packing of small files I tried ZFS on Linux but the limitations were: Upgrading is additional work because the package is in an external repository and is tied to specific kernel versions; it is not integrated with the package manager Write IOPS does not scale with number of devices in a raidz vdev. Cannot add disks to raidz vdevs Cannot have select data on RAID0 to reduce overhead and improve performance without additional physical disks or giving ZFS a single partition of the disks ext4 on LVM2 looks like an option except I can't tell whether I can shrink, extend, and redistribute onto new spindles RAID-type logical volumes (of course, I can experiment with LVM on a bunch of files). As far as I can tell, it doesn't have any of the nice-to-haves so I was wondering if there is something better out there. I did look at LVM dangers and caveats but then again, no system is perfect.

  Read the article

• Storage server 2003 shadow copy backups deleted!! help.. quick response would be appreciated

  - by Aceth

  hi there, we have a 1tb storage server i've just gone to transfer a 100Gb file across to it. And it has deleted the Shadow copy from googling i understand that this probably occured: http://support.microsoft.com/kb/826936 is there any way of recovering those shadow copies back? Thank you very much for having a read any how and any help would be greatly appreciated

  Read the article

• Is it possible to map a network path to any cloud storage hosts?

  - by Frantumn

  I use Microsoft SkyDrive and Google Drive. I was wondering if it was possible to map to a folder on a cloud service via FTP or something similar? I don't see any obvious ways on Google, or SkyDrive web sites. I know they each have their custom applications to access the cloud storage files. But my network admins block traffic on those applications. So I was looking for another way to access the files (not through the web site either).

  Read the article

• How do I compare the md5sum of a file with the md5 file (that was available to download with the file)?

  - by user91583

  Images are available for a distro on http://livedistro.org/gnulinux/israel-remix-team-mint-12. I want to use the 32-bit version. I have downloaded the ISO file for the 32-bit version (customdist.iso). I have downloaded the md5 file for the ISO file (customdist.iso.md5). I want to calculate the md5sum of the ISO file and compare it to the md5 file. I can use the md5sum command to display within the terminal the calculated md5 for the ISO file. I have searched the web and can't find a way to compare the calculated md5 for the ISO file with the downloaded md5 file. So far, the closest I have come is the command md5sum -c customdist.iso.md5 from within the folder containing both the files, but this command gives the result: md5sum: customdist.iso.md5: no properly formatted MD5 checksum lines found Any ideas?

  Read the article

• Utility or technique for swapping files quickly in Windows

  - by foraidt

  I frequently need to swap one file with another, without overwriting the original. Let's say there are two files, foo_new.dll and foo.dll. I usually rename them the follwing way: foo.dll - foo_old.dll, foo_new.dll - foo.dll, [do something with replaced file], foo.dll - foo_new.dll, foo_old.dll - foo.dll. This is ok for a single file to swap but it becomes tedious when swapping multiple files at once. Is there a Windows (7 and preferrably XP) utility or a technique that simplifies this task and works well when swapping multiple files? I'd prefer to be able to use it from within FreeCommander but Windows Explorer would be ok, too.

  Read the article

• elffile: ELF Specific File Identification Utility

  - by user9154181

  Solaris 11 has a new standard user level command, /usr/bin/elffile. elffile is a variant of the file utility that is focused exclusively on linker related files: ELF objects, archives, and runtime linker configuration files. All other files are simply identified as "non-ELF". The primary advantage of elffile over the existing file utility is in the area of archives — elffile examines the archive members and can produce a summary of the contents, or per-member details. The impetus to add elffile to Solaris came from the effort to extend the format of Solaris archives so that they could grow beyond their previous 32-bit file limits. That work introduced a new archive symbol table format. Now that there was more than one possible format, I thought it would be useful if the file utility could identify which format a given archive is using, leading me to extend the file utility: % cc -c ~/hello.c % ar r foo.a hello.o % file foo.a foo.a: current ar archive, 32-bit symbol table % ar r -S foo.a hello.o % file foo.a foo.a: current ar archive, 64-bit symbol table In turn, this caused me to think about all the things that I would like the file utility to be able to tell me about an archive. In particular, I'd like to be able to know what's inside without having to unpack it. The end result of that train of thought was elffile. Much of the discussion in this article is adapted from the PSARC case I filed for elffile in December 2010: PSARC 2010/432 elffile Why file Is No Good For Archives And Yet Should Not Be Fixed The standard /usr/bin/file utility is not very useful when applied to archives. When identifying an archive, a user typically wants to know 2 things: Is this an archive? Presupposing that the archive contains objects, which is by far the most common use for archives, what platform are the objects for? Are they for sparc or x86? 32 or 64-bit? Some confusing combination from varying platforms? The file utility provides a quick answer to question (1), as it identifies all archives as "current ar archive". It does nothing to answer the more interesting question (2). To answer that question, requires a multi-step process: Extract all archive members Use the file utility on the extracted files, examine the output for each file in turn, and compare the results to generate a suitable summary description. Remove the extracted files It should be easier and more efficient to answer such an obvious question. It would be reasonable to extend the file utility to examine archive contents in place and produce a description. However, there are several reasons why I decided not to do so: The correct design for this feature within the file utility would have file examine each archive member in turn, applying its full abilities to each member. This would be elegant, but also represents a rather dramatic redesign and re-implementation of file. Archives nearly always contain nothing but ELF objects for a single platform, so such generality in the file utility would be of little practical benefit. It is best to avoid adding new options to standard utilities for which other implementations of interest exist. In the case of the file utility, one concern is that we might add an option which later appears in the GNU version of file with a different and incompatible meaning. Indeed, there have been discussions about replacing the Solaris file with the GNU version in the past. This may or may not be desirable, and may or may not ever happen. Either way, I don't want to preclude it. Examining archive members is an O(n) operation, and can be relatively slow with large archives. The file utility is supposed to be a very fast operation. I decided that extending file in this way is overkill, and that an investment in the file utility for better archive support would not be worth the cost. A solution that is more narrowly focused on ELF and other linker related files is really all that we need. The necessary code for doing this already exists within libelf. All that is missing is a small user-level wrapper to make that functionality available at the command line. In that vein, I considered adding an option for this to the elfdump utility. I examined elfdump carefully, and even wrote a prototype implementation. The added code is small and simple, but the conceptual fit with the rest of elfdump is poor. The result complicates elfdump syntax and documentation, definite signs that this functionality does not belong there. And so, I added this functionality as a new user level command. The elffile Command The syntax for this new command is elffile [-s basic | detail | summary] filename... Please see the elffile(1) manpage for additional details. To demonstrate how output from elffile looks, I will use the following files: FileDescription configA runtime linker configuration file produced with crle dwarf.oAn ELF object /etc/passwdA text file mixed.aArchive containing a mixture of ELF and non-ELF members mixed_elf.aArchive containing ELF objects for different machines not_elf.aArchive containing no ELF objects same_elf.aArchive containing a collection of ELF objects for the same machine. This is the most common type of archive. The file utility identifies these files as follows: % file config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: ascii text mixed.a: current ar archive, 32-bit symbol table mixed_elf.a: current ar archive, 32-bit symbol table not_elf.a: current ar archive same_elf.a: current ar archive, 32-bit symbol table By default, elffile uses its "summary" output style. This output differs from the output from the file utility in 2 significant ways: Files that are not an ELF object, archive, or runtime linker configuration file are identified as "non-ELF", whereas the file utility attempts further identification for such files. When applied to an archive, the elffile output includes a description of the archive's contents, without requiring member extraction or other additional steps. Applying elffile to the above files: % elffile config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: non-ELF mixed.a: current ar archive, 32-bit symbol table, mixed ELF and non-ELF content mixed_elf.a: current ar archive, 32-bit symbol table, mixed ELF content not_elf.a: current ar archive, non-ELF content same_elf.a: current ar archive, 32-bit symbol table, ELF 64-bit LSB relocatable AMD64 Version 1 The output for same_elf.a is of particular interest: The vast majority of archives contain only ELF objects for a single platform, and in this case, the default output from elffile answers both of the questions about archives posed at the beginning of this discussion, in a single efficient step. This makes elffile considerably more useful than file, within the realm of linker-related files. elffile can produce output in two other styles, "basic", and "detail". The basic style produces output that is the same as that from 'file', for linker-related files. The detail style produces per-member identification of archive contents. This can be useful when the archive contents are not homogeneous ELF object, and more information is desired than the summary output provides: % elffile -s detail mixed.a mixed.a: current ar archive, 32-bit symbol table mixed.a(dwarf.o): ELF 32-bit LSB relocatable 80386 Version 1 mixed.a(main.c): non-ELF content mixed.a(main.o): ELF 64-bit LSB relocatable AMD64 Version 1 [SSE]

  Read the article

• How to create a .BAT file to download file from FTP server?

  - by Ole Jak

  How to create a .BAT file to download file or folder from FTP server? (and replace with it existing file) (we have links like ftp://me:[email protected]/file.file and absolute file link like C:\Users\UserName\Some mixed ??????? English Adress\file.file) (using only native windows (xp vista win7 etc) BAT functions and files)

  Read the article

• How to make a Windows batch file exit when a file exists in the file structure?

  - by Someone

  Hi, I want to make something like this... :LoopBegin if ???? goto End some other work goes here* gotoLoopBegin :End The "????" part should be a check that a file exists with the name "exit.txt" for example. If such a file exists in the current folder, I want the batch file to just exit. Is there a way to do this? Thanks

  Read the article

• How do I validate the size of a file using JavaScript?

  - by Radhi

  when upload button clicked on page... want to check filesize selected in fileupload control and stop postback of upload button if file size exceeds... what are the ways to do this using jquery/javascript?

  Read the article

• VB.NET 2008, Windows 7 and saving files

  - by James Brauman

  Hello, We have to learn VB.NET for the semester, my experience lies mainly with C# - not that this should make a difference to this particular problem. I've used just about the most simple way to save a file using the .NET framework, but Windows 7 won't let me save the file anywhere (or anywhere that I have found yet). Here is the code I am using to save a text file. Dim dialog As FolderBrowserDialog = New FolderBrowserDialog() Dim saveLocation As String = dialog.SelectedPath ... Build up output string ... Try ' Try to write the file. My.Computer.FileSystem.WriteAllText(saveLocation, output, False) Catch PermissionEx As UnauthorizedAccessException ' We do not have permissions to save in this folder. MessageBox.Show("Do not have permissions to save file to the folder specified. Please try saving somewhere different.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error) Catch Ex As Exception ' Catch any exceptions that occured when trying to write the file. MessageBox.Show("Writing the file was not successful.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error) End Try The problem is that this using this code throws an UnauthorizedAccessException no matter where I try to save the file. I've tried running the .exe file as administrator, and the IDE as administrator. Is this just Windows 7 being overprotective? And if so, what can I do to solve this problem? The requirements state that I be able to save a file! Thanks.

  Read the article

• compressed archive with quick access to individual file

  - by eric.frederich

  I need to come up with a file format for new application I am writing. This file will need to hold a bunch other text files which are mostly text but can be other formats as well. Naturally, a compressed tar file seems to fit the bill. The problem is that I want to be able to retrieve some data from the file very quickly and getting just a particular file from a tar.gz file seems to take longer than it should. I am assumeing that this is because it has to decompress the entire file even though I just want one. When I have just a regular uncompressed tar file I can get that data real quick. Lets say the file I need quickly is called data.dat For example the command... tar -x data.dat -zf myfile.tar.gz ... is what takes a lot longer than I'd like. MP3 files have id3 data and jpeg files have exif data that can be read in quickly without opening the entire file. I would like my data.dat file to be available in a similar way. I was thinking that I could leave it uncompressed and seperate from the rest of the files in myfile.tar.gz I could then create a tar file of data.dat and myfile.tar.gz and then hopefully that data would be able to be retrieved faster because it is at the head of outer tar file and is uncompressed. Does this sound right?... putting a compressed tar inside of a tar file? Basically, my need is to have an archive type of file with quick access to one particular file. Tar does this just fine, but I'd also like to have that data compressed and as soon as I do that, I no longer have quick access. Are there other archive formats that will give me that quick access I need? As a side note, this application will be written in Python. If the solution calls for a re-invention of the wheel with my own binary format I am familiar with C and would have no problem writing the Python module in C. Idealy I'd just use tar, dd, cat, gzip, etc though. Thanks, ~Eric

  Read the article

• How to skip the first line when fscanning a .txt file ?

  - by ZaZu

  Hello there, I am using C and my knowledge is very basic. I want to scan a file and get the contents after the first or second line only ... I tried : fscanf(pointer,"\n",&(*struct).test[i][j]); But this syntax simply starts from the first line =\ How is this possible ? Thanks.

  Read the article

• Read from file in eclipse

  - by Buzkie

  I'm trying to read from a text file to input data to my java program. However, eclipse continuosly gives me a Source not found error no matter where I put the file. I've made an additional sources folder in the project directory, the file in question is in both it and the bin file for the project and it still can't find it. I even put a copy of it on my desktop and tried pointing eclipse there when it asked me to browse for the source lookup path. No matter what I do it can't find the file. here's my code in case it's pertinent: System.out.println(System.getProperty("user.dir")); File file = new File("file.txt"); Scanner scanner = new Scanner(file); in addition, it says the user directory is the project directory and there is a copy there too. I have no clue what to do. Thanks, Alex after attempting the suggestion below and refreshing again, I was greeted by a host of errors. FileNotFoundException(Throwable).<init>(String) line: 195 FileNotFoundException(Exception).<init>(String) line: not available FileNotFoundException(IOException).<init>(String) line: not available FileNotFoundException.<init>(String) line: not available URLClassPath$JarLoader.getJarFile(URL) line: not available URLClassPath$JarLoader.access$600(URLClassPath$JarLoader, URL) line: not available URLClassPath$JarLoader$1.run() line: not available AccessController.doPrivileged(PrivilegedExceptionAction<T>) line: not available [native method] URLClassPath$JarLoader.ensureOpen() line: not available URLClassPath$JarLoader.<init>(URL, URLStreamHandler, HashMap) line: not available URLClassPath$3.run() line: not available AccessController.doPrivileged(PrivilegedExceptionAction<T>) line: not available [native method] URLClassPath.getLoader(URL) line: not available URLClassPath.getLoader(int) line: not available URLClassPath.access$000(URLClassPath, int) line: not available URLClassPath$2.next() line: not available URLClassPath$2.hasMoreElements() line: not available ClassLoader$2.hasMoreElements() line: not available CompoundEnumeration<E>.next() line: not available CompoundEnumeration<E>.hasMoreElements() line: not available ServiceLoader$LazyIterator.hasNext() line: not available ServiceLoader$1.hasNext() line: not available LocaleServiceProviderPool$1.run() line: not available AccessController.doPrivileged(PrivilegedExceptionAction<T>) line: not available [native method] LocaleServiceProviderPool.<init>(Class<LocaleServiceProvider>) line: not available LocaleServiceProviderPool.getPool(Class<LocaleServiceProvider>) line: not available NumberFormat.getInstance(Locale, int) line: not available NumberFormat.getNumberInstance(Locale) line: not available Scanner.useLocale(Locale) line: not available Scanner.<init>(Readable, Pattern) line: not available Scanner.<init>(ReadableByteChannel) line: not available Scanner.<init>(File) line: not available code used: System.out.println(System.getProperty("user.dir")); File file = new File(System.getProperty("user.dir") + "/file.txt"); Scanner scanner = new Scanner(file);

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >