Search Results

Search found 742 results on 30 pages for 'giant squid'.

Page 26/30 | < Previous Page | 22 23 24 25 26 27 28 29 30  | Next Page >

  • How to disable the RAID in x3400 M2

    - by BanKtsu
    Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

    Read the article

  • Why does snmp fail to use its own MIBs?

    - by chrisdew
    I've done a fresh install of Ubuntu 12.04LTS, and installed the snmpd and snmp packages. If I type: snmpwalk -m ALL -v2c -c public localhost 1.3 I get swathes of errors, of the form: Cannot adopt OID in SQUID-MIB: cacheClients ::= { cacheProtoAggregateStats 15 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendLineIndex ::= { nsExtendOutput2Entry 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutLine ::= { nsExtendOutput2Entry 2 } Cannot adopt OID in UCD-SNMP-MIB: laIndex ::= { laEntry 1 } Cannot adopt OID in UCD-SNMP-MIB: laNames ::= { laEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: laLoad ::= { laEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: laConfig ::= { laEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: laLoadInt ::= { laEntry 5 } Cannot adopt OID in UCD-SNMP-MIB: laLoadFloat ::= { laEntry 6 } Cannot adopt OID in UCD-SNMP-MIB: laErrorFlag ::= { laEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: laErrMessage ::= { laEntry 101 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyRestart ::= { netSnmpNotifications 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyShutdown ::= { netSnmpNotifications 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyStart ::= { netSnmpNotifications 1 } There a literally hundreds of these. If snmp doesn't even like the distro-included MIBs, what chance to I have of getting my own used? (I get the same form of error with my own MIB, on a different machine, which is why I set up a clean install.) Do other distros have this issue? Is there something obvious that I am overlooking here? Thanks, Chris.

    Read the article

  • HTTP Error 503 - Service is unavailable (how fix?)

    - by SilverLight
    i have a web site for download mobile files and there many users in my web site. sometimes i have the error below : HTTP Error 503 - Service is unavailable 1-so why this error happens and what is that mean? 2-as i know appache free up itself when it's oveloaded, but what about iis? how can i put some limitations in my server (i have remote access to my server) for prevent this error happening? a.is limitation of dowload's speed efficient for prevent that error's occur? how can i do that? is squid useful for this job or i can do that with another iis extension. b.is limitation of download's Bandwidth efficient for prevent that error's occur? how can i do that (with iis or another extension)? in right side of iis - configure area - i found some limits. what do those limits mean and can i use them for keep my server alive all the time? EDIT: after viewing event viewer of windows - custom views - server rols - web server (iis) i figure out there is no error in that area. but many warnings and information. the latest warnings and information are like below : warning A worker process '2408' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '6764'. warning A worker process '3232' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '3928'. thanks in advance best regards

    Read the article

  • ESXi Server with 12 physical cores maxed out with only 8 cores assigned in virtual machines

    - by Sam
    I have an ESXi 5 server running on a 2-processor, 12-core system with hyperthreading enabled. So: 12 physical cores, 24 logical ones. On this server are 4 Windows 7 VMs, each configured for 2 processors, each running VMware Tools. Looking at my stats in vSphere, my "core utilization" is constantly maxed out. Yes, these machines are working hard, but only 8 cores have been allocated. How is this possible? Should I look into reducing the processor count per machine as in this post: VMware ESX server? I checked to ensure that hardware virtualization is enabled in the BIOS of the machine (a DELL R410). I've also started reading up on configuration, but being a newbie there's a lot of material to catch up on. It also seems I should only bother with advanced settings and pools if I'm really pushing the load, and I don't think that I should be pushing it with so few VMs. I suspect that I have some basic, incorrect configuration setting, but it's also possible that I have some giant misconceptions about virtualization. Any pointers? EDIT: Given the responses I've gotten so far, it seems that this is a measurement problem and not a configuration problem, making this less critical. Perhaps the real question is: How does the core utilization of the server reach a higher percentage than all individual cores' core utilization, and given that this possibility makes the metric useless for overall server load, what is the best global metric for measuring CPU load on hyper-threaded systems?

    Read the article

  • PBS batch jobs - the qalter command

    - by Ryan Budney
    I've got a giant computation running on a Scientific Linux cluster. At present I have over 600 jobs parked in the queue, waiting for processor time, while a few are running. I'm trying to use the qalter command on some of the idle but scheduled jobs. I'd like to schedule them for a later time, so that other users can jump part of the queue, sort of as an act of politeness. Is this doable? For example, JOBNAME 292399 is currently idle, scheduled to be run whenever a spot in the queue opens up. But if I run qalter -a 10051000 292398 followed by qrerun 292398 I get qrerun: Request invalid for state of job 292398.euler. From the qalter documentation, I thought 10051000 refers to tomorrow (oct 5th, 10am) but perhaps I'm misunderstanding something? If I'm going about this the wrong way, please let me know. The main thing I'm looking for is a command that's easily scriptable, so that I can modify when my queued tasks get run. qalter seems good for those purposes if I can get it working. I'd rather avoid running qdel and re qsubbing the computations, as there's a bookkeeping issue on which tasks to restart (vs which ones not to). I want to avoid that kind of bookkeeping. From googling around I notice some qalter commands have rather different date formats, but the above appears to be correct, as far as I can tell from the man docs. Any help would be appreciated.

    Read the article

  • Traffic Shaping using tc

    - by Simon
    Hi guys, I have a 1.5 Mbit/s link that i want to share with 150 users. My setup is the following: Linux box with 3 NICs eth0 - public ip eth1 - subnet A - 50 users (static ips) eth2 - subnet B - 100 users (via dhcp) I am using squid as a transparent proxy on port 3128. dhcp server using ports 67 and 68. I was creating, but I think packets are not going to the right queues #!/bin/bash DEV=eth0 RATE_MAIN=2048kbit CEIL_MAIN=2048kbit BURST=1b CBURST=1b RATE_DEFAULT=1024kbit CEIL_DEFAULT=$CEIL_MAIN PRIO_DEFAULT=3 RATE_P2P=1024Kbit CEIL_P2P=$CEIL_MAIN PRIO_P2P=4 RATE_IND=32kbit CEIL_IND=$CEIL_DEFAULT tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $RATE_MAIN ceil $CEIL_MAIN tc class add dev $DEV parent 1:1 classid 1:10 htb rate $RATE_DEFAULT ceil $CEIL_MAIN burst $BURST cburst $CBURST prio $PRIO_WEB ## some other sub class for p2p other traffic tc class add dev $DEV parent 1:1 classid 1:20 htb rate $RATE_P2P ceil $CEIL_P2P burst $BURST cburst $CBURST prio $PRIO_P2P $IPS_NET1=50 $IPS_NET2=100 let $IPS=$IPS_NET1+$IPS_NET2 for ((i=1; i<= $IPS; i++)) do let CLASSID=($i+100) let HANDLE=($i+100) tc class add dev $DEV parent 1:10 classid 1:$CLASSID htb rate $RATE_IND ceil $CEIL_IND tc qdisc add dev $DEV parent 1:$CLASSID handle $HANDLE: sfq perturb 10 done ## Generate IP addresses ## IP_ADDRESSES="" # Subnet A BASE_IP=10.10.10. for ((i=2; i<=$IPS_NET1+1; i++)) do TEMP="$BASE_IP$i" IP=ADDRESSES="$IP_ADDRESSES $TEMP" done # Subnet B BASE_IP=192.168.0. for ((i=2; i<=$IPS_NET2+1; i++)) do TEMP="$BASE_IP$i" IP_ADDRESSES="$IP_ADDRESSES $TEMP" done ## FILTERS ## j=1 U32="tc filter add dev $DEV protocol ip parent 1:0 prio $PRIO_DEFAULT u32" for NET in $IP_ADDRESSES; do let CLASSID=($j+100) $U32_DEFAULT match ip src $NET/32 flowid 1:$CLASSID $U32_DEFAULT match ip dst $NET/32 flowid 1:$CLASSID let j=j+1 done Can you guys help me figure out what's wrong with it? basically I want my classes to be 1:1 (1.5 Mbit ) 1:10 (1024 Kbit) 1:20 (1024 Kbit) (200 ips each with 32 kbit)

    Read the article

  • How could Google Latitude find my exact PC location with no GPS or public wifi?

    - by Mike
    I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

    Read the article

  • Parental Controls in Ubuntu - per user

    - by Hamish Downer
    I would like to set up parental controls on Ubuntu for a friend of mine. I want it so that the child user has the controls set, but the parent user is not restricted. To be clear, they are sharing one computer, so a router based solution won't help. And I would like a set of step by step instructions to do this. Just one way of doing it. I'm an experienced Ubuntu user, happy at the command line. I've spent quite some time googling for this along the way. I hope that the GChildCare project will eventually make this easy, but it is not ready yet. In the meantime, the WebContentControl GUI provides a way of managing parental controls, but apply them to every user on the computer (easy WebContentContol install instructions and detailed instructions, discussion and related links on ubuntuforums). The ubuntuforums post has a FAQ that states that user-specific configuration is not possible with WebContentControl, and then provides 3 links he used to help him do it. But they are far from step by step instructions. There is this thread which is notes along the way and linking to this article about squid and dansguardian. And then to these two dansguardian articles which are somewhat in depth ... So does anyone know of an existing guide to how to set up parental controls on ubuntu with some users not affected? If no one has come up with an answer after a little bit, I'll set up a community wiki answer so we can come up with a guide.

    Read the article

  • setting up a proxy to mirror an SSH SOCKS connection

    - by aresnick
    I have two remote machines, remote1 and remote2. remote2 is only running sshd, and I can't run anything else on it. remote1 is a full-fledged server to which I have complete access. I can run a SOCKS proxy on remote2 via ssh -f -N -D *:8080 me@remote2 which lets me expose a SOCKS proxy on port 8080 on remote1. I'd like to authenticate this so that the proxy isn't sitting open. How can I do this? It seems like I should be able to use delegate, but I can't even seem to get its HTTP proxy functionality working. When I run delegated -r -P8081 SERVER=http PERMIT="*:*:*" REMITTABLE="*" I can't even get it to work on port 8081. Anyway, I was hoping someone could point me in the right direction to let me authenticate access to the SOCKS proxy connection? That is, I want to be able to point my browser's proxy at remote1 and browse the internet through the SSH SOCKS proxy/tunnel to remote2. squid doesn't support a SOCKS parent =( Thanks!

    Read the article

  • Pitfalls to using Gluster as a home/profile directory server?

    - by Bart Silverstrim
    I was asking recently about options for divvying up access to file servers, as we have a NAS solution that gets fairly bogged down when our users (with giant profiles, especially) all log in nearly simultaneously. I ran across Gluster and it looks like it can cluster different physical storage media into a single virtual volume and share it out like a virtual NAS from the client perspective and it support CIFS. My question is whether something like this would be feasible to use for home and profile directories in an active directory environment. I was worried about ACL's, primarily, as I didn't think CIFS was fine-grained enough to support NTFS permissions and it didn't look like Gluster exports those permission levels, just the base permissions for basic file sharing. I got the impression that using Gluster would allow for data to be redundant across multiple servers and would speed up access to the files under heavy load, while allowing us to dynamically boost storage capacity by just adding another server and telling Gluster's master node to add that server. Maybe I'm wrong with my understanding of it though. Anyone else use it or care to share how feasible this is?

    Read the article

  • Web filtering (Proxy or DNS) with option for users to ignore the block

    - by Jon Rhoades
    We are struggling with our users visiting infected or "attack" sites and Phising in general. Most of our machines are protected by an Enterprise anti virus and monitoring solution (McAffe ePO) and we try to get people to use Firefox... But no AV is perfect and we have to endure personal machines as well (albeit on their own 'Plague' VLANs) and would like to do something about Phishing as our users seem intent on disclosing their passwords to the world... To complicate matters we don't want to implement a block for many many reasons instead we would like to implement something akin to Firefox's "Reported Scam/Phish/Attack Site" - "Get me out of here" or crucially "Let me in anyway", giving the user a choice to still infect themselves if they feel like it (or look at a site incorrectly blacklisted). The reason we can't just use Firefox is we have a core enterprise App only certified on IE6&7 - thank you Oracle. Is it possible to implement this type of advisory filtering either using a proxy (in our case Squid) or DNS? http://serverfault.com/questions/15801/what-free-options-are-available-for-web-content-filtering http://serverfault.com/questions/47520/open-source-filtering-of-https-traffic Were a good start, but they don't address the advisory aspect of the filtering.

    Read the article

  • Can't connect to research.microsoft.com on home Qwest DSL connection

    - by rakingleaves
    I have a puzzling issue regarding accessing research.microsoft.com from my home Qwest DSL connection. By default, I frequently get timeouts when accessing research.microsoft.com from Firefox, Safari, or Chrome on my Mac. I also cannot access the site from Internet Explorer in a Windows VM. However, I am able to access the site through proxify.com, so I know the site is not down. Furthermore, I haven't noticed problems accessing other sites (in particular, www.microsoft.com works fine). Also, I can access research.microsoft.com when I'm connected to networks other than my home Qwest DSL connection. Together, the above make me suspect a problem with either my router (Airport Express) or, more likely, my ISP. Anyone have any thoughts on how I can narrow down the problem further? I could call my ISP and tell them the above, but my feeling is that probably won't get me very far. I can get by browsing research.microsoft.com through a proxy, but it would be nice to figure out what's going on here and fix the problem. Oh, the only relevant discussion I found via Google was here: http://forums.whirlpool.net.au/forum-replies-archive.cfm/1311734.html Update: Thanks to those who have tried to help! I found one other thing while Googling that may be vaguely relevant: http://thedaneshproject.com/posts/supportmicrosoftcom-not-working-behind-squid/ Disabling the Accept-Encoding headers in Firefox actually didn't make a difference for me. I just thought the above might spark some other ideas about how mishandling of HTTP headers somewhere might be causing this problem. Thanks again! Another update: In case anyone is still thinking about this; I've found that I can't surf research.microsoft.com using the links text-based browser, but I can reliably download individual files with wget. Maybe that helps?

    Read the article

  • Linux DHCPD Mac-Address based Groups

    - by GruffTech
    Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

    Read the article

  • Fully FOSS EMail solution

    - by Ravi
    I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

    Read the article

  • PC shut downs automatically after 10-20 second. No POST screen, no beeps

    - by emzero
    I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware. UPDATE I've removed the old thermal paste and apply a brand new one. I also cleaned every dust using a high pressure gas dust remover. Checked for bad capacitors, all of them seem ok. Opened the PSU, removed big giant dust balls, cleaned with high pressure dust remover. Still the same problem, but now it stays powered on for almost 20 seconds maybe. But no POST screen, no beeps at all, nothing. So I suspect it's a motherboard or PSU failure. Unfortunately I don't have an energy tester to test the PSU... Don't know what else to try. I don't have another 775-motherboard to test the CPU, RAM and VGA with it.

    Read the article

  • Need advise for choosing software\hardware for virtualization.

    - by Anatoly
    Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

    Read the article

  • limiting connections from tomcat to IIS - proxy? iptables?

    - by Chris Phillips
    Howdy, I've webapp on tomcat6 which is connecting to an M$ PlayReady DRM instance on IIS6.0 The performance is seen to be best when we bench mark (using ab) the DRM service with 25 concurrent connections, which gives about 250 requests per second, which is ace. higher concurrent connections results in TCP/IP timeouts and other lower level mess. But there is no way to control how the tomcat app connects to the service - it's not internally managing a pool of connections etc, they are all isolated http connections to the server. Ideally I'd like a situation where we can have 25 http 1.1 connections being kept alive permanently from tomcat and requesting the licenses through this static pool of connections, which I think would the best performance. But this is not in the code, so was looking for a way to possibly simulate this at the Linux level. I was possibly thinking that iptables connlimit might be able to gracefully handle these connections, but whilst it could limit, it'd probably still annoy the app. What about a proxy? nginx (or possibly squid) seems potentially appealing to run on the tomcat server and hit on localhost as we might want to add additional DRM servers to use under load balance anyway. Could this take 100 incoming connections from tomcat, accept them all and proxy over the the IIS server in a more respectful manner? Any other angles? EDIT - looking over mod_proxy for apache, which we are already using for conventional use on an apache instance in front of this tomcat instance, might be ideal. I can set a max value on the proxy_pass to only allow 25 connections, and keep them alive permanently. Is that my answer? Many thanks, Chris

    Read the article

  • Disable RAID to JBOD in server IBM x3400 M2

    - by BanKtsu
    Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

    Read the article

  • Disabling LDAP Signing on Windows PDC in Local Policy

    - by Golmaal
    I just tripped over my own feet it seems. Playing around on a Windows 2008 R2 server (set up as domain controller), I was intrigued by certain warning event (event id 2886) which says: "To enhance the security of directory servers, you can configure both Active Directory Domain Services (AD DS) and Active Directory Lightweight Directory Services (AD LDS) to require signed Lightweight Directory Access Protocol (LDAP) binds." So I thoughtlessly did some Googling and set the relevant policies which enforce LDAP signing. Now I don't remember but I may have done that using Local Policy. Now I have setup a pfsense box which must authenticate AD users via LDAP. While the firewall can communicate over secure channel, it is difficult to manage the same for other packages such as Squid and SquidGuard. So now I have to disable i.e. undo those policy changes. The problem is that they are greyed out! The policies in question are LDAP server signing and LDAP client signing. I don't remember what I did but when I access these policies from Local Policy editor on the server, they are set to "Require Signing" and are greyed out. The same policies can still be set via Default Domain Controller option in Group Policy editor. So how can I reset these greyed out policies? Thanks

    Read the article

  • Erratic WiFi 2.4 GHz channel spikes, what gives?

    - by Francis W. Usher
    Sorry guys, first a gripe about my neighbor's WiFi access point (it is related): they totally hog the center nine 2.4 GHz channels (3-11), centered right at 7! I know the outer regions of the signal don't make as much of a difference, and technically they're running channels 5 & 9. Anyway, their signal is clearly interfering with mine, which is necessarily centered at 3 or 11 to evade their interference. I guess it's somewhat a case of access point envy: they happen to have both a stronger signal and a higher data rate, while occupying twice the band width that I do. Getting to the point, I've noticed that they tend to sit nice and pretty centered at 7, but they definitely auto-select their channel, and I've noticed that the auto-selection algorithm tends to shift towards the higher channels; hence I decided to pick channel 3, and I don't get so many intermittent lag spikes any more. Anyway, the thing that weirded me out was the reason they have to auto-select sometimes: unexplained, powerful (talking order of 0dB here), giant spikes of 2.4 GHz activity in consistent regions of the spectrum. I don't think it's just noise, since my wireless monitoring software is registering a MAC address, a manufacturer, and usually a fairly coherent ascii name... and it seems to be a fairly well-confined signal. But these signals are fairly common, and they do some weird stuff to my signal. So my question is what are these signals? Where are they coming from? Where are they going? Why are they so ridiculously strong? Why don't they ever last very long? Here's an inSSIDer screenshot I took, for your perusal. I am labeled with "me", my greedy neighbor labeled with "neighbor", and the 2 quasar signals are labeled with "WTF?".

    Read the article

  • How can I setup a Proxy I can sniff traffic from using an ESX vswitch in promiscuous mode?

    - by sandroid
    I have a pretty specific requirement, detailed below. Here's what I'm not looking for help for, to keep things tidy and on topic: How to configure a standard proxy Any ESX setup required to facilitate traffic sniffing How to sniff traffic Any changes in design (my scope limits me) I need to setup a test environment for a network-sniffing based HTTP app monitoring tool, and I need to troubleshoot a client issue but he only has a prod network, so making changes to the config on client's system "just to try" is costly. The goal here is to create a similar system in my lab, and hit the client's webapp and redirect my traffic - using a proxy - into the lab environment. The reason I want to use a proxy is so that only this specific traffic is redirected for all to see, and not all my web traffic (like my visits to serverfault :P). Everything will run inside an ESX 4.1 machine. In there, there is a traffic collection vswitch in promiscuous mode that is not on the local network for security reasons. The VM containing our listening agent is connected to this vswitch. On the same ESX host, I will setup a basic linux server and install a proxy (either apache + mod_proxy or squid, doesn't matter). I'm looking for ideas on how to deploy this for my needs so I can then figure out how to set it up accordingly. Some ideas I've had were to setup two proxies, and have them talk to eachother through this vswitch in promiscuous mode, but it seems like alot of work. Another idea is a dual-homed proxy, but I've never seen/done that before so I'm not sure how doable it is for what I'd like. I am OK with setting up a second vswitch in promiscuous mode to facilitate this if need be, but I cannot put the vswitch on the lan (which is used so my browser would communicate with the proxy) in promiscuous mode. Any ideas are welcome.

    Read the article

  • Desktop Provisioning for a Small Linux Software Development Team

    - by deakblue
    Goal: Get a small team using a standard development image rather than 4 software devs setting up their own environments. Why: it takes a day or days to install a distro, build-specific libraries, tools like editors and IDEs, mysql, couchdb, java, maven, python, android-sdk, etc. It's a giant PITA that when repeated 4 times by 4 developers (not sys admins) wastes time and generates annoying divergences that crop up later (it-builds-on-my-box syndrome). There's no sharing of productivity, settings, tricks, scripts, set-ups. Some of this is helped by segregating the build systems into headless virtualbox images. This doesn't really address tooling though or the GUI-desktop dev that needs doing. So I see three basic strategies, ghosting, virtualization, and finally creating a kind of in-house linux distro (I guess Google does something like this). The target dev environment is based on Debian OpenBox and must allow a mix of 3rd gen Core i7 notebooks 8GB-minimum to work both single and multihead. Important, the lappies are not the same, but a mix of 2012 macbooks and PCs. So: virtualization: is doing all of your work within a VM, like VirtualBox, practical on this hardware or annoying. ghosting: will laptops from different manufacturers make this impractical. DIY distro: short of scripting a bunch of package installs, I don't know if there's any "distro-maker" that could keep this from being an epic project of scripting package installs. So any advice?

    Read the article

  • WAN Optimization for Small Office/Home Office

    - by TiernanO
    I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

    Read the article

  • Can Windows Media Player create playlists based on folder structure?

    - by Chaulky
    Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

    Read the article

  • Can anyone help me make my reverse proxy actually cache?

    - by Lenary
    Hi folks, I'm trying to configure a Reverse Caching Proxy but so far have had no luck. I would preferrably like to use apache (that will be all it will be used for), but am open to solutions using other software that can also run on Mac OS X 10.6 (I have also tried using Varnish and Squid, but with no more luck). We're running a system with about 80 mac mini clients that will be requesting lots of video from a server. To reduce load, we thought we could use Apache (which comes on the macs by default) to cache this video forever (or at least as long as possible) onto the macs' disks. I have managed to get a reverse proxy set up with apache using ProxyPass etc, but when i tried to add CacheEnable disk / to the configuration, nothing happened (i do have mod_disk_cache included). Can anyone help with my issue? The apache config file is here Thanks in advance Edit: So far I have been testing it with smaller text files, and it hasn't been caching properly. This suggests it is nothing to do with us actually downloading video, but actually to do with the cache configuration.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30  | Next Page >