Search Results

Search found 2190 results on 88 pages for 'man wa kileleshwa'.

Page 26/88 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Is it possible to use rsync over sftp (without an ssh shell) ?

  - by Tom Feiner

  Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

  Read the article

• The suggested way to handle pip(easy_install) with homebrew?

  - by Drake

  I know there are brew-gem and brew-pip but it is still really easy to get confused. Let's say my Mac OS X is 10.7.2. There are at least, as far as I know, 3 locations for Python modules (assume 2.7): /System/Library/Frameworks/Python.framework/Versions/2.7/ /Library/Python/2.7/site-packages /usr/local/lib/python2.7/site-packages/ (controlled within homebrew) For some Python modules, pip install them into 2, the so-called local/customized Python module location, and everything looks and works great. Ex, readline by *easy_install* (ipython suggested me to install readline by *easy_install* instead of pip) For some, it would try to install some miscellaneous files (ex, man, doc, ...) into system-wide location, which requires sudo! Ex, ipython insisted on installing man and doc into /System/Library/Frameworks/Python.framework/Versions/2.7/share/, which violates permission issue and all I can do is to use sudo. For some Python modules installed by brew, they are symbolic linked to /usr/local/lib/python2.7/site-packages/. Everything seems great except that you have to remember to add this location into PYTHONPATH. I am wondering any suggested and uniform way to handle those mass, or any explanation to make those stuff crystal clear.

  Read the article

• explanation of RAM specs, and what do I need for a Gaming rig

  - by ewok

  I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

  Read the article

• Strange File-Server I/O Spikes - What Is Causing This?

  - by CruftRemover

  I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

  Read the article

• Same script, different behavior [migrated]

  - by Antoine_935

  I just stumbled upon an interesting bug... Still trying to figure out what is exactly happening. Maybe you can help. First, the context. I'm currently building yet another man to html converter (for some reasons I won't motivate here, but I need it). So, have a look at the screenshot below (see the link), more precisely at the outlined spots. See? On the upper shell, I have &lt ; and &gt ;, that is, escaped html. While on the shell below I have < and directly. But as you can see (or do I seriously need looking glass ?), the command man 2 semget | webmanneris the same on both sides, as is the which webmanner. The two are executed roughly at the same moment, with no modification made to the script between. [Oops, cannot post pictures just yet... Here comes the link] http://aspyct.org/media/webmanner-bug.png But the shell below is older (open about 1 hour ago). Newer shells all print out &lt ;. So my first guess was that it somehow had a cached reference to the old inode of the file, or old blocks or whatever. So I modified parts of the script, at the start and then at the end, to print different messages. And, surprise, the message shown up on both terminals. But still, same difference between &lt ; and <. I'm confused... How to explain that behavior? I'm working on a OSX 10.8 (Mountain Lion) EDIT: OK, there is one big difference: the shell below uses ruby 1.9.3, while above is 1.8.7. Is there any known difference in string handling between the two versions ?

  Read the article

• Using PHP to extract data from an ATOM feed and using it reverse lookup coordinates to an actual add

  - by gbhall

  Basically I have a public feed: http://www.google.com/latitude/apps/badge/api?user=-1671995934285587708&type=atom If you go to my Google Profile you can see it says: "Gareth is in 6 Seaside Gardens, Mullaloo WA 6027, Australia (1 minute ago)" google.com/profiles/Gareth.B.Hall How can I, using PHP, display my location on a website the same way it's displayed on my Google Profile? Thanks

  Read the article

• php codeigniter mail function not working

  - by Hmwd

  Hi, i wa trying to do mail with php codeigner, but unfortunately its not working. the error which i got was the following; somebody please help me.. A PHP Error was encountered Severity: Warning Message: fsockopen() [function.fsockopen]: unable to connect to localhost:8025 (Connection refused) Filename: libraries/smtp.php Line Number: 105 Thanks in advance Ahamed

  Read the article

• How can i make a link to update my iPhone application?

  - by thierry

  hi, i know how to make a link to my app on the appstore with this URL itms-apps://ax.itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id= but i don't want the user goes on the software page but directly in the update tab what is the link to do this? is there a link to update the app ?(if an update existing) thanks

  Read the article

• Comparing Nested object properties using C#

  - by Kumar

  I have a method which compares two objects and returns a list of all the property names which are different. public static IList<string> GetDifferingProperties(object source, object) { var sourceType = source.GetType(); var sourceProperties = sourceType.GetProperties(); var targetType = target.GetType(); var targetProperties = targetType.GetProperties(); var properties = (from s in sourceProperties from t in targetProperties where s.Name == t.Name && s.PropertyType == t.PropertyType && s.GetValue(source,null) != t.GetValue(target,null) select s.Name).ToList(); return properties; } For example if I have two classes as follows: public class Address { public string AddressLine1 { get; set; } public string AddressLine2 { get; set; } public string City { get; set; } public string State { get; set; } public string Zip { get; set; } } public class Employee { public string FirstName { get; set; } public string MiddleName { get; set; } public string LastName { get; set; } public Address EmployeeAddress { get; set; } } I am trying to compare the following two employee instances: var emp1Address = new Address(); emp1Address.AddressLine1 = "Microsoft Corporation"; emp1Address.AddressLine2 = "One Microsoft Way"; emp1Address.City = "Redmond"; emp1Address.State = "WA"; emp1Address.Zip = "98052-6399"; var emp1 = new Employee(); emp1.FirstName = "Bill"; emp1.LastName = "Gates"; emp1.EmployeeAddress = emp1Address; var emp2Address = new Address(); emp2Address.AddressLine1 = "Gates Foundation"; emp2Address.AddressLine2 = "One Microsoft Way"; emp2Address.City = "Redmond"; emp2Address.State = "WA"; emp2Address.Zip = "98052-6399"; var emp2 = new Employee(); emp2.FirstName = "Melinda"; emp2.LastName = "Gates"; emp2.EmployeeAddress = emp2Address; So when I pass these two employee objects to my GetDifferingProperties method currently it returns FirstName and EmployeeAddress, but it does not tell me which exact property (which in this case is Address1) in the EmployeeAddress has changed. How can I tweak this method to get something like EmployeeAddress.Address1?

  Read the article

• UIAlert View Objective C - Opening app store link

  - by benhowdle89

  UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"An Alert!" delegate:self cancelButtonTitle:@"OK" otherButtonTitles:[[UIApplication sharedApplication] openURL:[NSURL URLWithString:@"http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=301349397&amp;amp;amp;amp;mt=8"]];]; [alert show]; [alert release]; I'm trying to display a UIAlertView with one "Ok" button and one "Buy Full Version" button. How can i make the above code work? Thanks

  Read the article

• usleep() php5 uses 40% of idle CPU

  - by Marcin

  Hi guys I have a weird question, I have a cli php script which uses usleep (somtimes 1sec, sometimes 2sec, somtimes 100ms it depends) if there is some wait required, but what I have noticed its that once on usleep() it seems to use about 40% of idle CPU: Cpu(s): 5.3%us, 21.3%sy, 0.0%ni, 57.2%id, 0.0%wa, 0.0%hi, 0.0%si, 16.1%st any ideas ? cheers

  Read the article

• Where's the Swap File/Partition?

  - by chrisbunney

  I'm investigating the virtual memory configuration of a Debian based Amazon EC2 instance, and as my background isn't in system admin, I'm slightly confused by what I'm seeing. We're using MongoDB, and the monitoring server we have indicates that the Mongo process is using about 20GB of swap space, however I can't figure out where this is located on the server. As far as I can tell from using the various suggested methods from Google, there is either a much smaller amount, or none at all. top indicates that there is 1.8GB of swap memory: top - 15:35:21 up 6 days, 3:23, 1 user, load average: 1.60, 1.43, 1.37 Tasks: 47 total, 2 running, 45 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 14.7%id, 83.8%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 3928924k total, 2855572k used, 1073352k free, 640564k buffers Swap: 0k total, 0k used, 0k free, 1887788k cached swapon -s doesn't seem to think there's any swap space: Filename Type Size Used Priority free -m doesn't think there's any swap either: total used free shared buffers cached Mem: 3836 3663 172 0 626 2701 -/+ buffers/cache: 336 3500 Swap: 0 0 0 And neither does vmstat: procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 3 0 66224 641372 2874744 0 0 21 5012 21 33 2 2 76 19 But cat /etc/fstab thinks there is a swap partition: /dev/xvda1 / ext3 defaults 1 1 /dev/xvda2 /mnt ext3 defaults 0 0 /dev/xvda3 swap swap defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 However df -k gives no indication of the xvda3 partition: Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 16513960 15675324 0 100% / tmpfs 1964460 8 1964452 1% /lib/init/rw udev 1914148 28 1914120 1% /dev tmpfs 1964460 4 1964456 1% /dev/shm So I really don't know what to make of this, because I appear to have a process using about 10 times more virtual memory than what might be available, and I have no idea where this virtual memory is on the system. I'm probably misinterpreting the output of the tools, so I'd be grateful if someone would be able to set me straight: What have I got wrong, what's the right interpretation, and how do you reach that interpretation? EDIT0: We use 10gen's MMS for monitoring the database, the relevant section for memory from the last data point is: "mem": { "virtual": 20749, "bits": 64, "supported": true, "mappedWithJournal": 20376, "mapped": 10188, "resident": 1219 }, This JSON is specific to the database process (I believe) rather than the system as a whole. fdisk -l /dev/xvda outputs... nothing? I tried each of the 3 xvda entries in /etc/fstab as well: root@ip:~# fdisk -l /dev/xvda1 Disk /dev/xvda1: 34.4 GB, 34359738368 bytes 255 heads, 63 sectors/track, 4177 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table root@ip:~# fdisk -l /dev/xvda2 root@ip:~# fdisk -l /dev/xvda3 root@ip:~# Edit1: Output of cat /proc/meminfo for the sake of completeness: MemTotal: 3928924 kB MemFree: 726600 kB Buffers: 648368 kB Cached: 2216556 kB SwapCached: 0 kB Active: 1945100 kB Inactive: 994016 kB Active(anon): 60476 kB Inactive(anon): 12952 kB Active(file): 1884624 kB Inactive(file): 981064 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 387180 kB Writeback: 0 kB AnonPages: 73380 kB Mapped: 1188260 kB Shmem: 48 kB Slab: 149768 kB SReclaimable: 146076 kB SUnreclaim: 3692 kB KernelStack: 1104 kB PageTables: 16096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1964460 kB Committed_AS: 305572 kB VmallocTotal: 34359738367 kB VmallocUsed: 16760 kB VmallocChunk: 34359721448 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 3932160 kB DirectMap2M: 0 kB

  Read the article

• Performance Tuning a High-Load Apache Server

  - by futureal

  I am looking to understand some server performance problems I am seeing with a (for us) heavily loaded web server. The environment is as follows: Debian Lenny (all stable packages + patched to security updates) Apache 2.2.9 PHP 5.2.6 Amazon EC2 large instance The behavior we're seeing is that the web typically feels responsive, but with a slight delay to begin handling a request -- sometimes a fraction of a second, sometimes 2-3 seconds in our peak usage times. The actual load on the server is being reported as very high -- often 10.xx or 20.xx as reported by top. Further, running other things on the server during these times (even vi) is very slow, so the load is definitely up there. Oddly enough Apache remains very responsive, other than that initial delay. We have Apache configured as follows, using prefork: StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 And KeepAlive as: KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 Looking at the server-status page, even at these times of heavy load we are rarely hitting the client cap, usually serving between 80-100 requests and many of those in the keepalive state. That tells me to rule out the initial request slowness as "waiting for a handler" but I may be wrong. Amazon's CloudWatch monitoring tells me that even when our OS is reporting a load of 15, our instance CPU utilization is between 75-80%. Example output from top: top - 15:47:06 up 31 days, 1:38, 8 users, load average: 11.46, 7.10, 6.56 Tasks: 221 total, 28 running, 193 sleeping, 0 stopped, 0 zombie Cpu(s): 66.9%us, 22.1%sy, 0.0%ni, 2.6%id, 3.1%wa, 0.0%hi, 0.7%si, 4.5%st Mem: 7871900k total, 7850624k used, 21276k free, 68728k buffers Swap: 0k total, 0k used, 0k free, 3750664k cached The majority of the processes look like: 24720 www-data 15 0 202m 26m 4412 S 9 0.3 0:02.97 apache2 24530 www-data 15 0 212m 35m 4544 S 7 0.5 0:03.05 apache2 24846 www-data 15 0 209m 33m 4420 S 7 0.4 0:01.03 apache2 24083 www-data 15 0 211m 35m 4484 S 7 0.5 0:07.14 apache2 24615 www-data 15 0 212m 35m 4404 S 7 0.5 0:02.89 apache2 Example output from vmstat at the same time as the above: procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 8 0 0 215084 68908 3774864 0 0 154 228 5 7 32 12 42 9 6 21 0 198948 68936 3775740 0 0 676 2363 4022 1047 56 16 9 15 23 0 0 169460 68936 3776356 0 0 432 1372 3762 835 76 21 0 0 23 1 0 140412 68936 3776648 0 0 280 0 3157 827 70 25 0 0 20 1 0 115892 68936 3776792 0 0 188 8 2802 532 68 24 0 0 6 1 0 133368 68936 3777780 0 0 752 71 3501 878 67 29 0 1 0 1 0 146656 68944 3778064 0 0 308 2052 3312 850 38 17 19 24 2 0 0 202104 68952 3778140 0 0 28 90 2617 700 44 13 33 5 9 0 0 188960 68956 3778200 0 0 8 0 2226 475 59 17 6 2 3 0 0 166364 68956 3778252 0 0 0 21 2288 386 65 19 1 0 And finally, output from Apache's server-status: Server uptime: 31 days 2 hours 18 minutes 31 seconds Total accesses: 60102946 - Total Traffic: 974.5 GB CPU Usage: u209.62 s75.19 cu0 cs0 - .0106% CPU load 22.4 requests/sec - 380.3 kB/second - 17.0 kB/request 107 requests currently being processed, 6 idle workers C.KKKW..KWWKKWKW.KKKCKK..KKK.KKKK.KK._WK.K.K.KKKKK.K.R.KK..C.C.K K.C.K..WK_K..KKW_CK.WK..W.KKKWKCKCKW.W_KKKKK.KKWKKKW._KKK.CKK... KK_KWKKKWKCKCWKK.KKKCK.......................................... ................................................................ From my limited experience I draw the following conclusions/questions: We may be allowing far too many KeepAlive requests I do see some time spent waiting for IO in the vmstat although not consistently and not a lot (I think?) so I am not sure this is a big concern or not, I am less experienced with vmstat Also in vmstat, I see in some iterations a number of processes waiting to be served, which is what I am attributing the initial page load delay on our web server to, possibly erroneously We serve a mixture of static content (75% or higher) and script content, and the script content is often fairly processor intensive, so finding the right balance between the two is important; long term we want to move statics elsewhere to optimize both servers but our software is not ready for that today I am happy to provide additional information if anybody has any ideas, the other note is that this is a high-availability production installation so I am wary of making tweak after tweak, and is why I haven't played with things like the KeepAlive value myself yet.

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• Looking Back at MIX10

  - by WeigeltRo

  It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

  Read the article

• WordPress contact form email as PDF

  - by lock

  I am using the below code for my WordPress site which is emailing all the form details as an HTML text but I need the details to be written into a PDF first and then have to email the PDF as an attachment. How can I achieve this? This is not a PHP code to use PHP's writePDF modules. So, any idea or any code to implement this? <div style="padding-left: 100px;"> [raw] [contact-form subject="Best Aussie Broker" to="[email protected]"] <div id="main34" style="border: 1px solid black; border-radius: 15px; width: 720px; padding: 15px;"> &nbsp; <h2><span style="color: #ff6600;">Express Application</span></h2> &nbsp; [contact-field label="First Name" type="name" required="true" /] [contact-field label="Last Name" type="text" /] [contact-field label="Email" type="email" required="true" /] [contact-field label="Purpose of Finance?" type="select" options="Home Loan,Refinance,Investment Loan,Debt Consolidation,Other" /] [contact-field label="Your deposit amount" type="text" /] [contact-field label="Amount you need to borrow?" type="text" /] [contact-field label="Brief description of the purpose for finance" type="textarea" required="true" /] <div><label></label> <input class="radio" type="radio" name="19" value="Single Application" onchange="showsingle();" /> <label class="radio">Single Application</label> <div class="clear-form"></div> <input class="radio" type="radio" name="19" value="Joint Application" onchange="showjoint();" /> <label class="radio">Joint Application</label> <div class="clear-form"></div> [contact-field label="Privacy Act" type="checkbox" required="true" /] I have read the Privacy Act 1988 (as Amended) and understand that by selecting the submit button I/we Authorize Best Aussie Broker to act on my/our behalf and manage personal information in relation to this application.<br> <a href="http://googleplex.com.au/pdf.pdf"><img src="http://googleplex.com.au/pdf.png" alt="" /> </a> </div> </div> <div id="single" style="display: none; width: 720px; border: 1px solid black; border-radius: 15px; padding: 15px; margin-top: 10px;"> <div style="padding-top: 10px; width: 720px; text-align: left;"> <h4><span style="color: #ff6600;">Last step then we will get all listed Australian vendors to fight it out for your best deal</span></h4> </div> <div> <label class="select" for="19-date-of-birth">Date of Birth</label> [contact-field label="Day" type="select" options="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" /] [contact-field label="Month" type="select" options="January,February,March,April,May,June,July,August,September,October,November,December" /] [contact-field label="Year" type="select" options="2000,1999,1998,1997,1996,1995,1994,1993,1992,1991,1990,1989,1988,1987,1986,1985,1984,1983,1982,1981,1980,1979,1978,197,1976,1975,1974,1973,1972,1971,1970,1969,1968,1967,1966,1965,1964,1963,1962,1961,1960,1959,1958,1957,1956,1955,1954,1953,1952,1951,1950,1949,1948,1947,1946,1945,1944,1943,1942,1941,1940,1939,1938,1937,1936,1935,1934,1933,1932,1931,1930,1929,1928,1927,1926,1925,1924,1923,1922,1921,1920, 1919,1918,1917,1916,1915,1914,1913,1912,1911,1910,1909" /] </div> [contact-field label="Address" type="text" /] [contact-field label="Suburb" type="text" /] [contact-field label="Postcode" type="text" /] <div> [contact-field label="State" type="select" options="VIC,NSW,QLD,SA,WA,TAS,NZ,Other" /] </div> [contact-field label="Best Contact" type="radio" options="Landline,Mobile" /] [contact-field label="Phone Number" type="text" /] [contact-field label="Marital Status" type="select" options="Married,Single,Other" /] [contact-field label="Residential Status" type="select" options="Renting, Home Owned, Home Mortgage, Board, Other" /] [contact-field label="Children/Dependents" type="select" options="0,1,2,3,4,5,6" /] <div></div> [contact-field label="Gross Yearly Income" type="text" /] [contact-field label="Current Employer" type="text" /] <div> <label class="select" for="19-year-of-empl">Time at this employer</label> [contact-field label="Year" type="select" options="0,1,2,3,4,5,6,7,8,9,10,More" /] [contact-field label="Month" type="select" options="0,1,2,3,4,5,6,7,8,9,10,11,12" /] </div> <div style="padding-right: 15px;"></div> </div> <div id="joint" style="display: none; width: 720px; border: 1px solid black; border-radius: 15px; padding: 15px; margin-top: 10px;"> <div style="padding-top: 10px; width: 720px; text-align: left;"> <h4><span style="color: #ff6600;">Last step then we will get all listed Australian vendors to fight it out for your best deal</span></h4> </div> <div style="float: left; width: 320px;"> <div> <label class="select" for="19-date-of-birth1">Date of Birth</label> [contact-field label="Day" type="select" options="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" /] [contact-field label="Month" type="select" options="January,February,March,April,May,June,July,August,September,October,November,December" /] [contact-field label="Year" type="select" options="2000,1999,1998,1997,1996,1995,1994,1993,1992,1991,1990,1989,1988,1987,1986,1985,1984,1983,1982,1981,1980,1979,1978,197,1976,1975,1974,1973,1972,1971,1970,1969,1968,1967,1966,1965,1964,1963,1962,1961,1960,1959,1958,1957,1956,1955,1954,1953,1952,1951,1950,1949,1948,1947,1946,1945,1944,1943,1942,1941,1940,1939,1938,1937,1936,1935,1934,1933,1932,1931,1930,1929,1928,1927,1926,1925,1924,1923,1922,1921,1920, 1919,1918,1917,1916,1915,1914,1913,1912,1911,1910,1909" /] </div> [contact-field label="Address" type="text" /] [contact-field label="Suburb" type="text" /] [contact-field label="Postcode" type="text" /] <div> [contact-field label="State" type="select" options="VIC,NSW,QLD,SA,WA,TAS,NZ,Other" /] </div> [contact-field label="Best Contact" type="radio" options="Landline,Mobile" /] [contact-field label="Phone Number" type="text" /] <div></div> <div></div> [contact-field label="Marital Status" type="select" options="Married,Single,Other" /] [contact-field label="Residential Status" type="select" options="Renting, Home Owned, Home Mortgage, Board, Other" /] [contact-field label="Children/Dependents" type="select" options="0,1,2,3,4,5,6" /] <div></div> <div><label class="text" for="netincome">Net Income</label> <input id="netincome" type="text" name="netincome" /> <select id="netincome-dropdown" name="netincome-dropdown"> <option>Monthly</option> <option>Yearly</option> </select></div> [contact-field label="Current Employer" type="text" /] <div> <label class="select" for="19-year-of-empl2">Time at this employer</label> [contact-field label="Year" type="select" options="0,1,2,3,4,5,6,7,8,9,10,More" /] [contact-field label="Month" type="select" options="0,1,2,3,4,5,6,7,8,9,10,11,12" /] </div> </div> <div style="float: right; width: 320px; padding-right: 50px;"> <div> <label class="select" for="19-date-of-birth3">Date of Birth</label> [contact-field label="Day" type="select" options="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" /] [contact-field label="Month" type="select" options="January,February,March,April,May,June,July,August,September,October,November,December" /] [contact-field label="Year" type="select" options="2000,1999,1998,1997,1996,1995,1994,1993,1992,1991,1990,1989,1988,1987,1986,1985,1984,1983,1982,1981,1980,1979,1978,197,1976,1975,1974,1973,1972,1971,1970,1969,1968,1967,1966,1965,1964,1963,1962,1961,1960,1959,1958,1957,1956,1955,1954,1953,1952,1951,1950,1949,1948,1947,1946,1945,1944,1943,1942,1941,1940,1939,1938,1937,1936,1935,1934,1933,1932,1931,1930,1929,1928,1927,1926,1925,1924,1923,1922,1921,1920, 1919,1918,1917,1916,1915,1914,1913,1912,1911,1910,1909" /] </div> [contact-field label="Address" type="text" /] [contact-field label="Suburb" type="text" /] [contact-field label="Postcode" type="text" /] <div> [contact-field label="State" type="select" options="VIC,NSW,QLD,SA,WA,TAS,NZ,Other" /] </div> [contact-field label="Best Contact" type="radio" options="Landline,Mobile" /] [contact-field label="Phone Number" type="text" /] <div></div> <div></div> [contact-field label="Marital Status" type="select" options="Married,Single,Other" /] [contact-field label="Residential Status" type="select" options="Renting, Home Owned, Home Mortgage, Board, Other" /] [contact-field label="Children/Dependents" type="select" options="0,1,2,3,4,5,6" /] <div></div> <div><label class="text" for="netincome">Net Income</label> <input id="netincome" type="text" name="netincome" /> <select id="netincome-dropdown" name="netincome-dropdown"> <option>Monthly</option> <option>Yearly</option> </select></div> [contact-field label="Current Employer" type="text" /] <div> <label class="select" for="19-year-of-empl">Time at this employer</label> [contact-field label="Year" type="select" options="0,1,2,3,4,5,6,7,8,9,10,More" /] [contact-field label="Month" type="select" options="0,1,2,3,4,5,6,7,8,9,10,11,12" /] </div> </div> <div style="clear: both;"></div> <div></div> </div> &nbsp; [/contact-form][/raw] </div>

  Read the article

• List of blogs - year 2010

  - by hajan

  This is the last day of year 2010 and I would like to add links to all blogs I have posted in this year. First, I would like to mention that I started blogging in ASP.NET Community in May / June 2010 and have really enjoyed writing for my favorite technologies, such as: ASP.NET, jQuery/JavaScript, C#, LINQ, Web Services etc. I also had great feedback either through comments on my blogs or in Twitter, Facebook, LinkedIn where I met many new experts just as a result of my blog posts. Thanks to the interesting topics I have in my blog, I became DZone MVB. Here is the list of blogs I made in 2010 in my ASP.NET Community Weblog: (newest to oldest) Great library of ASP.NET videos – Pluralsight! NDepend – Code Query Language (CQL) NDepend tool – Why every developer working with Visual Studio.NET must try it! jQuery Templates in ASP.NET - Blogs Series jQuery Templates - XHTML Validation jQuery Templates with ASP.NET MVC jQuery Templates - {Supported Tags} jQuery Templates – tmpl(), template() and tmplItem() Introduction to jQuery Templates ViewBag dynamic in ASP.NET MVC 3 - RC 2 Today I had a presentation on "Deep Dive into jQuery Templates in ASP.NET" jQuery Data Linking in ASP.NET How do you prefer getting bundles of technologies?? Case-insensitive XPath query search on XML Document in ASP.NET jQuery UI Accordion in ASP.NET MVC - feed with data from database (Part 3) jQuery UI Accordion in ASP.NET WebForms - feed with data from database (Part 2) jQuery UI Accordion in ASP.NET – Client side implementation (Part 1) Using Images embedded in Project’s Assembly Macedonian Code Camp 2010 event has finished successfully Tips and Tricks: Deferred execution using LINQ Using System.Diagnostics.Stopwatch class to measure the elapsed time Speaking at Macedonian Code Camp 2010 URL Routing in ASP.NET 4.0 Web Forms Conflicts between ASP.NET AJAX UpdatePanels & jQuery functions Integration of jQuery DatePicker in ASP.NET Website – Localization (part 3) Why not to use HttpResponse.Close and HttpResponse.End Calculate Business Days using LINQ Get Distinct values of an Array using LINQ Using CodeRun browser-based IDE to create ASP.NET Web Applications Using params keyword – Methods with variable number of parameters Working with Code Snippets in VS.NET  Working with System.IO.Path static class Calculating GridView total using JavaScript/JQuery The new SortedSet<T> Collection in .NET 4.0 JavaScriptSerializer – Dictionary to JSON Serialization and Deserialization Integration of jQuery DatePicker in ASP.NET Website – JS Validation Script (part 2) Integration of jQuery DatePicker in ASP.NET Website (part 1) Transferring large data when using Web Services Forums dedicated to WebMatrix Microsoft WebMatrix – Short overview & installation Working with embedded resources in Project's assembly Debugging ASP.NET Web Services Save and Display YouTube Videos on ASP.NET Website Hello ASP.NET World... In addition, I would like to mention that I have big list of blog posts in CodeASP.NET Community (total 60 blogs) and the local MKDOT.NET Community (total 61 blogs). You may find most of my weblogs.asp.net/hajan blogs posted there too, but there you can find many others. In my blog on MKDOT.NET Community you can find most of my ASP.NET Weblog posts translated in Macedonian language, some of them posted in English and some other blogs that were posted only there. By reading my blogs, I hope you have learnt something new or at least have confirmed your knowledge. And also, if you haven't, I encourage you to start blogging and share your Microsoft Tech. thoughts with all of us... Sharing and spreading knowledge is definitely one of the noblest things which we can do in our life. "Give a man a fish and he will eat for a day. Teach a man to fish and he will eat for a lifetime" HAPPY NEW 2011 YEAR!!! Best Regards, Hajan

  Read the article

• IPS Facets and Info files

  - by mkupfer

  One of the unusual things about IPS is its "facet" feature. For example, if you're a developer using the foo library, you don't install a libfoo-dev package to get the header files. Intead, you install the libfoo package, and your facet.devel setting controls whether you get header files. I was reminded of this recently when I tried to look at some documentation for Emacs Org mode. I was surprised when Emacs's Info browser said it couldn't find the top-level Info directory. I poked around in /usr/share but couldn't find any info files. $ ls -l /usr/share/info ls: cannot access /usr/share/info: No such file or directory Was I was missing a package? $ pkg list -a | egrep "info|emacs" editor/gnu-emacs 23.1-0.175.0.0.0.2.537 i-- editor/gnu-emacs/gnu-emacs-gtk 23.1-0.175.0.0.0.2.537 i-- editor/gnu-emacs/gnu-emacs-lisp 23.1-0.175.0.0.0.2.537 --- editor/gnu-emacs/gnu-emacs-no-x11 23.1-0.175.0.0.0.2.537 --- editor/gnu-emacs/gnu-emacs-x11 23.1-0.175.0.0.0.2.537 i-- system/data/terminfo 0.5.11-0.175.0.0.0.2.1 i-- system/data/terminfo/terminfo-core 0.5.11-0.175.0.0.0.2.1 i-- text/texinfo 4.7-0.175.0.0.0.2.537 i-- x11/diagnostic/x11-info-clients 7.6-0.175.0.0.0.0.1215 i-- $ Hmm. I didn't have the gnu-emacs-lisp package. That seemed an unlikely place to stick the Info files, and pkg(1) confirmed that the info files were not there: $ pkg contents -r gnu-emacs-lisp | grep info usr/share/emacs/23.1/lisp/info-look.el.gz usr/share/emacs/23.1/lisp/info-xref.el.gz usr/share/emacs/23.1/lisp/info.el.gz usr/share/emacs/23.1/lisp/informat.el.gz usr/share/emacs/23.1/lisp/org/org-info.el.gz usr/share/emacs/23.1/lisp/org/org-jsinfo.el.gz usr/share/emacs/23.1/lisp/pcvs-info.el.gz usr/share/emacs/23.1/lisp/textmodes/makeinfo.el.gz usr/share/emacs/23.1/lisp/textmodes/texinfo.el.gz $ Well, if I have what look like the right packages but don't have the right files, the next thing to check are the facets. The first check is whether there is a facet associated with the Info files: $ pkg contents -m gnu-emacs | grep usr/share/info dir facet.doc.info=true group=bin mode=0755 owner=root path=usr/share/info file [...] chash=[...] facet.doc.info=true group=bin mode=0444 owner=root path=usr/share/info/mh-e-1 [...] file [...] chash=[...] facet.doc.info=true group=bin mode=0444 owner=root path=usr/share/info/mh-e-2 [...] [...] Yes, they're associated with facet.doc.info. Now let's look at the facet settings on my desktop: $ pkg facet FACETS VALUE facet.locale.en* True facet.locale* False facet.doc.man True facet.doc* False $ Oops. I've got man pages and various English documentation files, but not the Info files. Let's fix that: # pkg change-facet facet.doc.info=True Packages to update: 970 Variants/Facets to change: 1 Create boot environment: No Create backup boot environment: Yes Services to change: 1 DOWNLOAD PKGS FILES XFER (MB) Completed 970/970 181/181 9.2/9.2 PHASE ACTIONS Install Phase 226/226 PHASE ITEMS Image State Update Phase 2/2 PHASE ITEMS Reading Existing Index 8/8 Indexing Packages 970/970 # Now we have the info files: $ ls -F /usr/share/info a2ps.info dir@ flex.info groff-2 regex.info aalib.info dired-x flex.info-1 groff-3 remember ...

  Read the article

• Working for free?

  - by Jonny

  I came across this article Work for Free that got me thinking. The goal of every employer is to gain more value from workers than the firm pays out in wages; otherwise, there is no growth, no advance, and no advantage for the employer. Conversely, the goal of every employee should be to contribute more to the firm than he or she receives in wages, and thereby provide a solid rationale for receiving raises and advancement in the firm. I don't need to tell you that the refusenik didn't last long in this job. In contrast, here is a story from last week. My phone rang. It was the employment division of a major university. The man on the phone was inquiring about the performance of a person who did some site work on Mises.org last year. I was able to tell him about a remarkable young man who swung into action during a crisis, and how he worked three 19-hour days, three days in a row, how he learned new software with diligence, how he kept his cool, how he navigated his way with grace and expertise amidst some 80 different third-party plug-ins and databases, how he saw his way around the inevitable problems, how he assumed responsibility for the results, and much more. What I didn't tell the interviewer was that this person did all this without asking for any payment. Did that fact influence my report on his performance? I'm not entirely sure, but the interviewer probably sensed in my voice my sense of awe toward what this person had done for the Mises Institute. The interviewer told me that he had written down 15 different questions to ask me but that I had answered them all already in the course of my monologue, and that he was thrilled to hear all these specifics. The person was offered the job. He had done a very wise thing; he had earned a devotee for life. The harder the economic times, the more employers need to know what they are getting when they hire someone. The job applications pour in by the buckets, all padded with degrees and made to look as impressive as possible. It's all just paper. What matters today is what a person can do for a firm. The resume becomes pro forma but not decisive under these conditions. But for a former boss or manager to rave about you to a potential employer? That's worth everything. What do you think? Has anyone here worked for free? If so, has it benefited you in any way? Why should(nt) you work for free (presuming you have the money from other means to keep you going)? Can you share your experience? Me, I am taking a year out of college and haven't gotten a degree yet so that's probably why most of my job applications are getting ignored. So im thinking about working for free for the experience?

  Read the article

• Don't Forget To Enjoy Life

  - by Justin

  I have a pretty clear stance on posting personal information in my blogs. I tend to avoid it almost instinctively. Part of that is because I am a somewhat private person. And the other is because I know how easy it is for personal information to be gathered and collected from sources such as blogs. So, this has remained a tech only blog for me. I've only posted topics mostly related to issues I have encountered at work. In a way this blog is a 'bookmark' for me. If I post something here and run into the issue again it allows me to refer back to a convenient place where the 'fix' is documented in a way that I understand. But today, I am posting something that speaks to everyone. Something PERSONAL. Honestly, I expect this entry to receive zero views. But if nothing else, I can come back to this blog one day when I'm having a bad day or something and run across this post. And I will be reminded... DON'T FORGET TO ENJOY LIFE. Say this to yourself out loud, right now. People, we can get caught up in some rather mundane details as we trek through life. It's so easy to lose track of what really matters that it should be no surprise to find yourself reading something like this and thinking to yourself 'Yeah. You are right, man. Some of this crap I'm clinging on to right now is so small in the grand scheme of things'. I have no reservation, no shame, in saying that I am more often than not caught up in the ever evolving world of 'shit that does not matter'. When you work in technology, you are surrounded by deadlines, upgrades, new versions, support 'end of life', etc. And by time you get done with your 8 hours you go home and put in a few more because you are STILL CAUGHT UP in the things you dealt with at work all day. DO YOURSELF A FAVOR. DO YOUR FAMILY AND FRIEND A FAVOR. When you are done for the day, and you drive home, get those work-related things out of your head before you pull into the driveway. If you are still thinking on them when you park the car, leave the engine running, close your eyes and take a deep breath. If you believe in God, pray. If you don't then meditate for a second with the INTENTION of letting go of the day and becoming the 'real you'. You may have forgotten who the real you is so I'll remind you.... THE REAL YOU IS THAT GUY OR GAL THAT LAUGHS, LOVES, AND LIVES. Be the real you as often as possible. If you can't do it during your 9 - 5, do it at home. YOUR RELATIONSHIPS AND YOUR PERSONAL HAPPINESS DEPEND ON IT. I am going to make you a promise right now. If you do what I've just said, your days will be longer and your joy will be exponential. I can't explain why I know this to be true. But I do know it. And if you are there reading this right now, you know it is true too. We both know it is true because it COMES FROM WITHIN EVERY MAN, WOMAN and CHILD. We are born into love and happiness. Lets not fade away into the darkness so easily found in this world. Lets keep the flame burning. The flame of passion. Passion for LIFE. Peace be with you.

  Read the article

• How to access attributes using Nokogiri

  - by Liz

  I have a simple task of accessing the values of some attributes. Below is a simple script that uses Nokogiri::XML::Builder to create a simple xml doc. require 'nokogiri' builder = Nokogiri::XML::Builder.new(:encoding => 'UTF-8') do |xml| xml.Placement(:messageId => "392847-039820-938777", :system => "MOD", :version => "2.0") { xml.objects { xml.object(:myattribute => "99", :anotherattrib => "333") xml.nextobject_ '9387toot' xml.Entertainment "Last Man Standing" } } end puts builder.to_xml puts builder.root.attributes["messageId"] The results are below: <?xml version="1.0" encoding="UTF-8"?> <Placement messageId="392847-039820-938777" version="2.0" system="MOD"> <objects> <object anotherattrib="333" myattribute="99"/> <nextobject>9387toot</nextobject> <Entertainment>Last Man Standing</Entertainment> </objects> </Placement> C:/Ruby/lib/ruby/gems/1.8/gems/nokogiri-1.4.2-x86-mingw32/lib/nokogiri/xml/document.rb:178:in `add_child': Document already has a root node (RuntimeError) from C:/Ruby/lib/ruby/gems/1.8/gems/nokogiri-1.4.2-x86-mingw32/lib/nokogiri/xml/node.rb:455:in `parent=' from C:/Ruby/lib/ruby/gems/1.8/gems/nokogiri-1.4.2-x86-mingw32/lib/nokogiri/xml/builder.rb:358:in `insert' from C:/Ruby/lib/ruby/gems/1.8/gems/nokogiri-1.4.2-x86-mingw32/lib/nokogiri/xml/builder.rb:350:in `method_missing' from C:/Documents and Settings/etrojan/workspace/Lads/tryXPATH2.rb:15 The xml that is generated looks fine. However, my attempts to access attributes cause an error to be generated, "Document already has a root node". I don't understand why a puts statement would cause this error. Any suggestions would be greatly appreciated.

  Read the article

• Why might stable_sort be affecting my hashtable values?

  - by zebraman

  I have defined a struct ABC to contain an int ID, string NAME, string LAST_NAME; My procedure is this: Read in a line from an input file. Parse each line into first name and last name and insert into the ABC struct. Also, the struct's ID is given by the number of the input line. Then, push_back the struct into a vector masterlist. I am also hashing these to a hashtable defined as vector< vector , using first name and last name as keywords. That is, If my data is: Garfield Cat Snoopy Dog Cat Man Then for the keyword cash hashes to a vector containing Garfield Cat and Cat Man. I insert the structs into the hashtable using push_back again. The problem is, when I call stable_sort on my masterlist, my hashtable is affected for some reason. I thought it might be happening since the songs are being ordered differently, so I tried making a copy of the masterlist and sorting it and it still affects the hashtable though the original masterlist is unaffected. Any ideas why this might be happening?

  Read the article

• documenting class properties

  - by intuited

  I'm writing a lightweight class whose properties are intended to be publicly accessible, and only sometimes overridden in specific instantiations. There's no provision in the Python language for creating docstrings for class properties, or any sort of properties, for that matter. What is the accepted way, should there be one, to document these properties? Currently I'm doing this sort of thing: class Albatross(object): """A bird with a flight speed exceeding that of an unladen swallow. Properties: """ flight_speed = 691 __doc__ += """ flight_speed (691) The maximum speed that such a bird can attain """ nesting_grounds = "Throatwarbler Man Grove" __doc__ += """ nesting_grounds ("Throatwarbler Man Grove") The locale where these birds congregate to reproduce. """ def __init__(**keyargs): """Initialize the Albatross from the keyword arguments.""" self.__dict__.update(keyargs) Although this style doesn't seem to be expressly forbidden in the docstring style guidelines, it's also not mentioned as an option. The advantage here is that it provides a way to document properties alongside their definitions, while still creating a presentable class docstring, and avoiding having to write comments that reiterate the information from the docstring. I'm still kind of annoyed that I have to actually write the properties twice; I'm considering using the string representations of the values in the docstring to at least avoid duplication of the default values. Is this a heinous breach of the ad hoc community conventions? Is it okay? Is there a better way? For example, it's possible to create a dictionary containing values and docstrings for the properties and then add the contents to the class __dict__ and docstring towards the end of the class declaration; this would alleviate the need to type the property names and values twice. I'm pretty new to python and still working out the details of coding style, so unrelated critiques are also welcome.

  Read the article

• constructor function's object literal returns toString() method but no other method

  - by JohnMerlino

  I'm very confused with javascript methods defined in objects and the "this" keyword. In the below example, the toString() method is invoked when Mammal object instantiated: function Mammal(name){ this.name=name; this.toString = function(){ return '[Mammal "'+this.name+'"]'; } } var someAnimal = new Mammal('Mr. Biggles'); alert('someAnimal is '+someAnimal); Despite the fact that the toString() method is not invoked on the object someAnimal like this: alert('someAnimal is '+someAnimal.toString()); It still returns 'someAnimal is [Mammal "Mr. Biggles"]' . That doesn't make sense to me because the toString() function is not being called anywhere. Then to add even more confusion, if I change the toString() method to a method I make up such as random(): function Mammal(name){ this.name=name; this.random = function(){ return Math.floor(Math.random() * 15); } } var someAnimal = new Mammal('Mr. Biggles'); alert(someAnimal); It completely ignores the random method (despite the fact that it is defined the same way was the toString() method was) and returns: [object object] Another issue I'm having trouble understanding with inheritance is the value of "this". For example, in the below example function person(w,h){ width.width = w; width.height = h; } function man(w,h,s) { person.call(this, w, h); this.sex = s; } "this" keyword is being send to the person object clearly. However, does "this" refer to the subclass (man) or the super class (person) when the person object receives it? Thanks for clearing up any of the confusion I have with inheritance and object literals in javascript.

  Read the article

• How to access different domain data using Java script

  - by shoaibmohammed

  Hello there, Here is the issue. Suppose there is a DOMAIN A which is going to be the server containing a PHP Script file. The data from Domain A is to be accessed by a Client at DOMAIN B. I know it cannot be accessed directly using JavaScript. So what I did is, in Domain A I created a a JavaScript file as front-end for the PHP Script which AJAXes the PHP and returns the data. But unfortunately it din't work I came across an example having PHP as a Middle Man in the client side. But I donot want to keep any server side PHP code as a middle man in the client side. I just want to give out the Javascript to the client domain. http://stackoverflow.com/questions/578095/how-to-get-data-with-javascript-from-another-server DOMAIN A PHP - data.php <?php echo "Server returns data"; ?> JS - example.js Does the Ajax to the PHP function getData() { //assume ajax is done for data.php and data is retrieved, now return the data return ajaxed_data; } Domain B JS Client includes the example.js file from Domain A in his HTML <script type="text/javascript" src="http://www.DomainA.com/example.js"></script> <script type="text/javascript"> alert(getData()); </script> I hope I have made myself understandable ! Can this be established ? Its something like Google friend connect, what I mean is, just provide JavaScript to the client and thats it. Every thing carried out in server side Thankx for providing this forum

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >