Search Results

Search found 799 results on 32 pages for 'netbook'.

Page 26/32 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Acer Aspire One 725 - missing graphic card driver?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• Turning off Chrome's visual effects

  - by Wesley

  Is there any way to turn off the visual effects used by Google Chrome? For example, the tabs slide around smoothly, the scrolling is really smooth, and there is a huge arrow that fades in and out during download. Reason why I'd like to know is primarily because I want to maximize battery life on my netbook by using less visual effects and, secondly, because I use Chrome on slower systems and would like to maximize the performance and efficiency of Chrome. This applies mainly to Windows XP, but also Vista, 7 and even (X)Ubuntu 9.10. EDIT1: Oh yes... disabling the attaching/detaching of tabs and turning them into translucent in the process. That's a bit stressful on my slower machines.

  Read the article

• None of my bash commands work

  - by Kevin

  I have an Ubuntu 9.10 netbook. I has always run great. Two days ago, I was running as root for a while (~30), and when I moved back to my user account (only other account one this machine), all the commands in ~/bin stopped working. If I try ls, it comes up with "cannot execute binary file". Same with ln, mv, mkdir, clear, cp, etc. They all run as root(which makes sense, different files), but I have no idea why this happened. I don't want to stay as root to move around easily. Any idea?

  Read the article

• None of my bash commands work

  - by Kevin

  I have an Ubuntu 9.10 netbook. I has always run great. Two days ago, I was running as root for a while (~30), and when I moved back to my user account (only other account one this machine), all the commands in ~/bin stopped working. If I try ls, it comes up with "cannot execute binary file". Same with ln, mv, mkdir, clear, cp, etc. They all run as root(which makes sense, different files), but I have no idea why this happened. I don't want to stay as root to move around easily. Any idea?

  Read the article

• Linux Bluetooth [closed]

  - by Chris

  Not sure if this is the proper forum; please forgive me if it's not... I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run either hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt) or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• left shift "stuck " on Windows 7

  - by yoshco

  I'm having a hard time with a "stuck" left shift key. my sister complained she is getting symbols instead of numbers using her netbook. after some time I fired up the on screen keyboard (winr+r"osk") and to my surprise, the left shift key was in some kind of toggle mode. since then I'm trying to inject registry keys to disable accessibility futures like stickykeys etc. to no avail. tough luck all http://www.howtogeek.com/howto/Windows-vista/disable-the-irritating-sticky-filter-keys-popup-dialogs/ check box are disabled What's going on? How can I fix this? Operating system is Windows 7 Home Premium, SP1.

  Read the article

• Random flickering on 2.6.32 kernels after suspend

  - by whitequark

  I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• Hybrid USB Install Method - netboot and iso

  - by Samus Arin

  I was following the steps here ("Preparing Files for USB Memory Stick Booting") https://help.ubuntu.com/10.04/installation-guide/i386/boot-usb-files.html to create a installation usb drive for 12.1. The very first paragraph of the article states "The second is to also copy a CD image onto the USB stick and use that as a source for packages, possibly in combination with a mirror." However, the only instructions mentioned regarding an iso image is to simply copy one somewhere on the drive (after its been made bootable and syslinux, vmlinuz and initrd.gz installed/copied): "you should now copy an Ubuntu ISO image onto the stick." I thought it strange there where no configuration steps for "pointing" the kernel to the iso (like a line in syslinux.cfg or a boot: option or something), but went ahead with the install anyway. I don't think the iso was used at all, it appeared that all the OS files where downloaded during the install process. Therefore, I was wondering if anyone knew how to use this local iso image in this particular installation technique (I know the image can be installed with dd, but thats a different technique), b/c I need to reinstall (I installed unity, but it's wayy to much for my little Atom based netbook) ? Thank you.

  Read the article

• how can I fix error: hd0 out of disk?

  - by rux

  I am running Ubuntu 12.04 on a netbook - Acer AS 1410. After a download session, I restarted the computer and it said: error: hd0 out of disk. Press any key to continue... I pressed everything, but it's just frozen there. Any idea what's wrong with it and what I can do to fix it? I haven't been able to run my computer at all since it's frozen like that. Help please! I booted the live cd and ran sudo fdisk -lu into terminal, and here's what it gave me: Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a696263 Device Boot Start End Blocks Id System /dev/sda3 2048 117229567 58613760 5 Extended /dev/sda5 * 71647232 109039615 18696192 83 Linux /dev/sda6 109041664 117229567 4093952 82 Linux swap / Solaris /dev/sda7 4096 71645183 35820544 83 Linux Partition table entries are not in disk order I am somewhat of a beginner in this, so don't know what this means. any ideas? Thanks!

  Read the article

• Dropbox takes hours? to sync & shows diff. modified times (coincidentially in the future)

  - by user10580

  Dropbox is taking hours to sync, I can't tell exactly how long because the time stamps on the website make no sense - they say the files were modified. . . tomorrow. Actually my netbook (windows xp) says they're last modified tomorrow in windows explorer as well. It's bizarre. The time and date on both computers are correct. The files in question are in a symlinked directory on the laptop (which are synced fine, with the correct timestamps). I have looked for an option to force dropbox to sync, but haven't located one. (There might be a command line method, but I haven't had the time to explore). thanks

  Read the article

• How can I set the PowerShell default window size in Windows 7?

  - by Nate

  In Windows 7, how can I set the default PowerShell window size? By default it comes up too tall for the netbook screen I am working with. I have tried the usual way of changing the size—by clicking in the upper-left corner and choosing “Properties”—but it tells me: Unable to modify the shortcut: . Check to make sure it has not been deleted or renamed. (yes, there is a dot in the middle of the error message) I also tried right-clicking on the PowerShell shortcut in the Start menu and changing properties there, however, the changes don’t seem to stick.

  Read the article

• Is an Intel Atom D525 suitable to run MythTV

  - by Martin Thompson

  I have an oldish netbook with an Atom N450 (1.6GHz, 512KB cache) - I've been using it to experiment with MythTV, but it seems really slow, even just to work through the menus! Seconds, sometimes 10 or 20s, to load a new menu. Admittedly from a remote backend, but my older Core1 based laptop seems to be fine with the same setup. I was hoping to use one of the so-called "nettop" devices which currently seem to be D525-based (1.8GHz, 1MB cache) - is double the cache really going to make that much difference? Or has the internal architecture of the Atom moved on leaps and bounds in between? Given that I design non-Intel embedded computers for a living I was hoping to get lots of hardcore architecture detail from the Intel website, so I could see for myself, but I can't find it! So: will a D525 be fast enough to run a MythTV backend/frontend combined box?

  Read the article

• How can I restore my system from WIM files?

  - by Brian Henk

  I installed another OS on my netbook and decided I want to revert back to Windows 7 Starter. I was careful to keep the recovery partition, but even when I manage to boot to it, the system just restarts a few seconds after selecting "restore." I grabbed all the files from the recovery partition onto a flash drive. I also have been able to use this drive to boot a Windows 7 install, but it was unable to find the recovery partition. These WIM files seem to be the key to installing Windows again. How can I use them?

  Read the article

• 12.04 No Sound - ALC888 / Radeon 3200HD

  - by Ross

  Evening all. I have a MSI U230 netbook, MV40 processor, 4Gb RAM with integrated ATI Radeon 3200HD grahics & an ALC888 codec integrated soundcard. It has HDMI out as well. I've tried a few distro's and have been around linux for a short time. I reckon I've settled on Ubuntu 12.04 (32bit) due to it doing pretty much everything I want it to. I'm working with a fresh install right now. I recently re-installed when I was going in circles trying to solve my problem before. I install Ubuntu and it works, except for the sound. I have tried things like reinstalling Alsa, editing my asound.conf file, installing HDA Verb and a few other things. Its at the point where I need to ask for help... Some outputs: ross@ross:~$ aplay -l ** List of PLAYBACK Hardware Devices ** card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ross@ross:~$ uname -r 3.2.0-34-generic-pae ross@ross:~$ lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] ross@ross:~$ lspci | grep Audio 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] Added options snd-hda-intel position_fix=1 to alsa-base.conf file Unmuted all in alsamixer Can anyone suggest anything more?

  Read the article

• Upgrade to 12.04 results to empty Dash, no date & time either on the top panel

  - by Nicolas

  I've upgraded from Ubuntu netbook remix something to 12.04 LTS, and I've got two issues. (Got an Asus eeePc 32bits, Intel 945GME x86/MMX/SSE2 and Intel Atom CPU N270 @ 1.6Ghz x2) Nothing in the Dash. Only the "home" tab, other tabs are missing. No search results whatsoever. Missing elements in the system panel, privacy and date & time. No date & time on the right corner either. I've tried to reset unity with the terminal but the process was a whole mess full of errors. It did show date & time in the system panel (not on the top-right corner) while the process was going on in the terminal. But then it was such a mess (no more icons on the right corner amongst other things), and the process wouldn't complete, so I had to reboot the computer and get Unity as before, still no date & time and privacy.

  Read the article

• taskbar-free window manager

  - by 7vies

  I'm looking for a window manager that is not based on the "standard" taskbar (which I find a poor idea and I'm completely tired of). I'm aware of tiling window managers and improvements in last versions of operating systems, but I can't find what I need. I suppose that any window takes the whole screen (or can be tiled), and I imagine switching between windows like that: on a hotkey or mouse hot zone the screen becomes a task switcher where tasks are organized in a somewhat convenient manner. Well, it's a bit like a taskbar with autohide, but I think there could be some more convenient ideas than simply stacking icons and descriptions... It is also supposed to be lightweight enough, for example to run on a netbook. Any suggestions?

  Read the article

• Wifi not working on Acer Aspire One D270

  - by Dani

  brand new baby linux user here, never used Ubuntu or any other linux OS before, so be gentle and use short words! I installed Ubuntu 12.04 on my new Acer Aspire One D270-F61C/KF netbook (it's a Japanese computer which had Japanese windows preinstalled, and I decided to take the plunge and try Ubuntu because English Windows costs the earth and stars). Wifi isn't working; I enter my wireless password, it tries to connect for a while, then asks for my password again. And KEEPS ASKING, every few minutes. Wired connection works fine. Wireless card is a Broadcom BCM4313; I have the "additional drivers" checked and installed (I tried unchecking and then reinstalling them in case that would help, no joy, and now my home wifi connection isn't showing up in the list of available connections, argh). I've done a lot of googling and I gather there's a lot of issues with Broadcom cards, but some of the answers are for earlier ubuntu builds and many of them are a bit confusing for a new user. I gather I need to try installing some new drivers other than the proprietary ones provided, but I'm having trouble figuring out how that's done. Anyone got some simple, step by step instructions for me? Please bear in mind, TOTAL N00B. (EDIT): OKAY, got it fixed finally; after suggestions on the Ubuntu forums and messing around with drivers, what finally worked was installing Wicd. Not... using Wicd, for some reason, just installing it fixed it. ...I CHOOSE NOT TO QUESTION IT.

  Read the article

• How to sync Ubuntu/software/configurations between N computers with free software and/or without a cloud?

  - by skanatek

  Note: this question is not about syncing data in a Dropbox-like way (files, folders), it is more about syncing configurations. I would like to have exactly the same version of Ubuntu with all the software installed and configured both on my Desktop PC and on my Laptop PC (and maybe on my small netbook PC) without using Ubuntu Sync and with minimal maintenance effort (setup once, run for a long time). The use case is the following: I work on my Laptop PC and do some changes to software configuration, for example: configure vim to have a new plugin update the Search Tracker / Recoll file search index configure Thunderbird to have an additional IMAP account ('remember password') add some new bookmarks in Firefox/Chrome change the desktop background image install new software with apt-get install build and install new software with checkinstall etc. I do some 'sync' operation I switch to my Desktop PC and get all the changes from (1) working on the Desktop PC I work on my Desktop PC and do some changes to software configuration, for example: add new directory to the list of directories to be backed up by DejaDup add a new check spelling dictionary to the Libreoffice Writer configure the Terminator software to have colored fonts install new font into the Ubuntu system configure Ekiga to make phone calls etc. I do some 'sync' operation I switch to my Laptop PC and get all the changes from (1) and (4) working on the Laptop PC. Question: What free/open-source software can I use to sync both machines' Ubuntu systems, installed software and configurations? Is it possible to do that without any cloud services? Complementary question: It is obvious that the Desktop PC and the Laptop PC have different hardware configurations. How does the 'sync software' in question deal with video drivers, wlan drivers and their configurations? Note: I do not need all the PCs to be synced at the same time, because I work with only one single machine at once. Note: I considered to use Chef to solve the problem, but it seems that it might be really cumbersome to maintain such a setup. Note: I also considered using a bootable USB with Ubuntu installed (portable Linux), but I am not sure that the video drivers will work then.

  Read the article

• Is computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Running Mathimatica-5 remotely

  - by oxinabox.ucc.asn.au

  Ok, I have Mathmatica 5 - a powerful CAS. I have a cheap netbook, wich not olny is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose linuxes, but one of which is windows server 2008) Mostly over SSH but other protocols can be arraged for some, i'm sure. (I might even be able to remote desktop the windows server 2008) So I'ld like to install Mathmatica onto one of these machine and then run it remotely. Either from the command line via putty or via some other method. I glanced through the mathmatical documentaion and read soemthing about using some MathLink program, wich linkes the front end istalled on my computer to a remote kernal. Anyone have any expirience with this? I'm not sure if this belongs here or in SuperUser.

  Read the article

• Windows 7 starter will not shutdown or logoff

  - by richzilla

  Hi all, Im having some problems with a friends netbook (a dell mini 10). It will not shutdown or logoff via the usual route. Whenever the shutdown/logoff button is clicked, it will briefly freeze (maybe for only a second) and then do nothing. Ive tried shutting down manually via the command line using shutdown /p but all to no avail, it just defaults back to flashing cursor in the command prompt. There doesnt seem to be any mention of a similar problem on google so i was wondering if anyone else had any ideas. Thanks oh and its runnning windows 7 starter.

  Read the article

• Problem Installing Ubuntu 12.04 - [Errno 5]

  - by Rob Barker

  I'm trying to intall Ubuntu 12.04 to my brand new eBay purchased hard drive. Only got the drive today and already it's causing me problems. The seller is a proper proffesional company with 99.9% positive feedback, so it seems unlikely they would have sold me something rubbish. My old hard drive packed up last Tuesday and so i bought a new one to replace it. Because this was an entirely new drive i decided to install Ubuntu as there was no current operating system. My computer is an eMachines EM250 netbook. There's no disc drive so i am installing from a USB stick. The new operating system loads beautifully, and the desktop appears just as it should. When i click install i am taken to the installer which copies the files to about 35% and then displays this: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. The hard drive can be heard constantly crackling. When i booted Ubuntu 12.04 from my old faulty hard drive as a test, i didn't even make it past the purple Ubuntu screen, so it can't be that bad. Any ideas? Message to the moderators. Please do not close this thread. I'm well aware there may be other threads on this, but i don't want it closing as the others do not provide the answer i am looking for. Thank you.

  Read the article

• Fn key sticks down

  - by Oli

  Just bought my significant other a shiny new Samsung Q330 13" netbook, stuck an OCZ Agility in it and installed Maverick. Just as a quick aside, this is a devastating combination. Graphics work perfectly and it cold-boots to desktop in about 7 seconds. Very quick. But (common to laptops) I've got a couple of problems. I'll start with the most problematic and start a new thread for the other. Like a lot of laptops, there is a Fn (function) modifier to allow some keys to have another purpose. When I tried to alter the brightness of the screen by tapping Fn+Down, it worked but kept on going until it was as dim as it could go. I tapped Fn+Up and it went to the other extreme. After that the entire keyboard ceases to work properly because the Fn modifier appears to be locked. Additionally, and as a direct side effect, I think, clicking on things doesn't result in a standard result. It's as if control is being held. A reboot is the only thing that seems to fix these problems. This isn't a problem if you don't touch the Fn key but as there are two of them on the keyboard, an accident is going to happen sooner than later, requiring a reboot (and probably some data loss). I don't have a lot of experience with laptops (I prefer my hulking great desktop) so this isn't my area of expertise. I'm open to all suggestions, even disabling the two Fn keys until we can find a better solution.

  Read the article

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32  | Next Page >