Search Results

Search found 13900 results on 556 pages for 'physical drive'.

Page 26/556 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Can I have a computer with 2 physical HDs, & Dual boot option, one for Windows & one for Ubuntu

  - by Frank

  When my HD failed in my old computer with a dual core, I immediately went out and bought a new 6 core PC because I needed it for business and had to have an immediate solution. The old computer was otherwise a good computer. I don't want to spend a $100+ for a new operating system for the old computer because the Windows 7 Professional opperating system for the new computer will only allow one install. So, I decided to look and see if there were any free operating systems and found Ubuntu. I downloaded it and burned a live CD and would like to try it on the old computer. I found a 200 GB HD I can buy for $30 and the seller will format it any way I want. There are also other HDs available at a similar price. What I was thinking I would like to do is buy 2 HDs. Then I can have one formatted for Ubuntu 12.04 and install Windows XP Pro SP1 on the other HD for which I have the original installation CD. Then I would like to have a dual boot option so that when I power up the computer, I can choose whether to use Windows XP or Ubuntu. Is this possible? If so, how would I do it, that is, arrange it so a dual boot option presents itself on power up.

  Read the article

• About Hard Disk Drive Docks

  - by Crossbrowser

  I'm thinking of buying a drive dock to put my unused large HDD to use. I will also probably use the dock to backup files and swap the drives regularly. I have a few questions though: Are they noisy? I plan to use them via USB (because I don't think I have eSata connectors), am I gonna want to kill myself every time I backup? (I know it's supposed to be 480 Mbps, but how realistic is this?) Do you recommend a particular model? (I was thinking about this Startech HDD dock) Thank you

  Read the article

• Input/output (read) errors in Bacula while setting up a Tape Drive + Autochanger

  - by Kyle Brandt

  When running the label barcode command in bacula I am getting Input/output errors. I am just getting started in trying to set this up: Connecting to Storage daemon TapeDevice at ny-back01.ny.stackoverflow.com:9103 ... Sending label command for Volume "ACJ332" Slot 1 ... 3307 Issuing autochanger "unload slot 8, drive 0" command. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ332" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ332", Slot 1 successfully created. Sending label command for Volume "ACJ331" Slot 2 ... 3307 Issuing autochanger "unload slot 1, drive 0" command. 3304 Issuing autochanger "load slot 2, drive 0" command. 3305 Autochanger "load slot 2, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ331" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ331", Slot 2 successfully created. Sending label command for Volume "ACJ328" Slot 3 ... 3307 Issuing autochanger "unload slot 2, drive 0" command. 3304 Issuing autochanger "load slot 3, drive 0" command. 3305 Autochanger "load slot 3, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ328" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ328", Slot 3 successfully created. Sending label command for Volume "ACJ329" Slot 4 ... 3307 Issuing autochanger "unload slot 3, drive 0" command. 3304 Issuing autochanger "load slot 4, drive 0" command. 3305 Autochanger "load slot 4, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ329" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ329", Slot 4 successfully created. Sending label command for Volume "ACJ335" Slot 5 ... 3307 Issuing autochanger "unload slot 4, drive 0" command. 3304 Issuing autochanger "load slot 5, drive 0" command. 3305 Autochanger "load slot 5, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ335" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ335", Slot 5 successfully created. Sending label command for Volume "ACJ334" Slot 6 ... 3307 Issuing autochanger "unload slot 5, drive 0" command. 3304 Issuing autochanger "load slot 6, drive 0" command. 3305 Autochanger "load slot 6, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ334" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ334", Slot 6 successfully created. Sending label command for Volume "ACJ333" Slot 7 ... 3307 Issuing autochanger "unload slot 6, drive 0" command. 3304 Issuing autochanger "load slot 7, drive 0" command. 3305 Autochanger "load slot 7, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ333" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ333", Slot 7 successfully created. Sending label command for Volume "ACJ330" Slot 8 ... 3307 Issuing autochanger "unload slot 7, drive 0" command. Bacula-dir: # Definition of file storage device Storage { Name = TapeDevice # Do not use "localhost" here Address = ny-back01.... # N.B. Use a fully qualified name here SDPort = 9103 Password = "..." Device = ULTRIUM-HH4 Media Type = LTO-4 Media Type = File Autochanger = Yes } Bacula-sd: Autochanger { Name = StorageLoader1U Device = ULTRIUM-HH4 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg5 } Device { Name = ULTRIUM-HH4 Media Type = LTO-4 Archive Device = /dev/st0 AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes; RandomAccess = no; } Anyone knows what this means / why I am getting this?

  Read the article

• Exchange Server 2003 Drive Error

  - by Saif Khan

  My exchange box went offline this AM. The logs show The device, \Device\Harddisk1, has a bad block. I tried running chkdsk D: /x /r but that didn't help either. I went to the Exchange Manager and tried to move the .stm file from D: to C: but got Exchange System Manager The database files in this store are corrupted. ID no: c104173b Exchange System Manager What else is there to try just to get this online for a few hours until I can get onsite to change the drive. This is a Windows Server 2003 server.

  Read the article

• Why dd is not a reliable command to write bootable .iso files to USB thumb drive?

  - by Samik

  As the answers here indicate Ubuntu .iso s are not expected to boot if copied with dd to a USB thumb drive. Now my question is why is so that some Linux distributions have the option to directly write their bootable .iso file to a thumb drive with dd but some (read Ubuntu) have not(for Ubuntu I think it has to be converted to .img first). Is it for some architectural difference in .isos? Or is it due to any limitation of dd itself?I don't know if it is off-topic here. I can move it to a more proper place if the community thinks so or suggests one. Some explanation would be appreciable.

  Read the article

• How to change ext4 Hard drive partion to NTFS for installing Windows xp?

  - by Sina

  I have a ubuntu in Root directory with separated Home directory. This is all my hard partition. I inserted xp cd to install it but I can't find any hard drive suggestion ! I decided to boot it by Gparted and change the Root directory to NTFS, I formatted it and run xp cd again. I can't find any hard drive too. I don't want to change all partitions because I don't want to lose my data on them. What should I do ?

  Read the article

• System stuttering caused by hard drive

  - by LukLed

  My system keeps freezing for about 1-2 second every time I try to do something. For example, when I enter URL in browser, it freezes and starts working after few seconds. It is probably related to hard drive. I installed HD tune and when benchmark is in progress, causing constant disk use, everything works fine in background, there are no lags. What can be the reason of this issue? My hardware is Acer Aspire 7740G-6969 running on Windows 7.

  Read the article

• How do I access an external hard drive plugged into my router?

  - by Shawn

  I am running Ubuntu 11.10 and I own a Netgear N600 Wireless Dual Band Router with a USB port built into it. Naturally, the router came with instructions on how to mount and view this drive with both Windows and Mac, but nothing about Linux. I have an WD Elements 1 TB external HDD that I would like to plug into the router and share across my home network. However, when I plug it in, absolutely nothing happens on my desktop. I checked on two different machines and nothing seems to indicate that the drive has been mounted (or is even seen at all) on either machine. I am fully aware that it may not be possible to do this with a Linux system, but I was hoping someone might have a suggestion. Thanks!

  Read the article

• Data transfer is extrem slow after partitioning extern usb drive

  - by user125912

  I bought an extern usb 3.0 drive with 500 gb capacity. OS is Windows 7. I use it with an usb 2.0 slot, no prob. Initially I used it without making several partitions and it was fast as hell. Then I had the great idea to make partitions, one for programs, one for data and one for backup. I chose the free EASEUS Partition Master 9.1.1. and ended up with these partitions: F:Apps, primary, NTFS, 100gb H:Data, logic, NTFS, 250gb B:Backup, logic, NTFS, 150gb THE PROBLEM: When I copy files from C: to F: I get a transfer rate of about 100 KB/S ! When I copy files from C: to H: I get a transfer rate of about 4 MB/S ! thats all muuuch to slow, slower then before. What can I do to speed the shit up? Thanks in advance!

  Read the article

• How to force a hard drive to shut down

  - by Phenom

  I have a hard drive in my computer that I'm not using. I want Windows 7 to shut it down. I don't want to have to manually remove the cable. (The reason is that for some strange reason my computer will not boot if it's not connected. disk boot failure after upgrading power supply) I know that Windows 7 will shut it down after a certain period of time of it not being used. How can I force it to shut down without having to wait for this?

  Read the article

• Analyse frequencies of date ranges in Google Drive

  - by wnstnsmth

  I have a Google Drive spreadsheet where I would like to compute occurrences of date ranges. As you can see in my sheet, there is a column date_utc+1 which contains almost random date data. https://docs.google.com/spreadsheet/ccc?key=0AhqMXeYxWMD_dGRkVGRqbkR3c05mWUdhYkJWcFo2Mmc What I would like to do is 1) put the date values into bins of 6 hours each, i.e. 12/5/2012 23:57:04 until 12/6/2012 0:03:17 would be in the first bin, 12/6/2012 11:20:53 until 12/6/2012 17:17:07 in the second bin, and so forth. Then, I would like to count the occurrence of those bins, such as bin_from bin_to freq ----------------------------------------------- 12/5/2012 23:57:04 12/6/2012 0:03:17 2 12/6/2012 11:20:53 12/6/2012 17:17:07 19 ... ... ... Hope it is clear what I mean. Partial hints are very welcome as well since I am pretty new to spreadsheeting.

  Read the article

• Installed Ubuntu on usb drive, now it's read-only and can't be formatted

  - by weiszam

  I installed Ubuntu (ubuntu-13.04-desktop-amd64) on a 8 gb pendrive. Because it worked pretty slow, I wanted to change it back to a normal pendrive. But this is what happened. Windows7 can't open the usb drive, can't view files or anything, can't access attributes. When I select to format, it says it can't format it because it is write-protected. Tried the same running from an Ubuntu, and trying from a booted GParted thing. When I view the partitions, they can't be deleted either. What should I do to get it formatted?

  Read the article

• Missing hard drive total space in Windows

  - by bluedot951

  I have an HP Pavilion DM4 with a 750 GB hard drive. A few days ago, I installed Windows 8 on it, so I am now dual booting Win7 and Win8 (and I also have a 100 MB system reserved partition). I noticed that I am only able to see 700 GB of hard disk space (169 for Win 8 and 529 for Win 7). I booted of an Ubuntu 11.04 LiveCD and in the disk utility it said that my Win 8 partition is 182 GB and my Win 7 partition is 568 GB, correctly adding up to 750 GB. I would like to reclaim the missing space in its respective partitions. Any advice on how to go about doing this?

  Read the article

• Get HDD (and NOT Volume) Serial Number on Vista Ultimate 64 bit

  - by TheAgent

  Hi all. I was once looking for getting the HDD serial number without using WMI, and I found it. The code I found and posted on StackOverFlow.com works very well on 32 bit Windows, both XP and Vista. The trouble only begins when I try to get the serail number on 64 bit OSs (Vista Ultimate 64, specifically). The code returns String.Empty, or a Space all the time. Anyone got an idea how to fix this? EDIT: I used the tools Dave Cluderay suggested, with interesting results: Here is the output from DiskId32, on Windows XP SP2 32-bit: To get all details use "diskid32 /d" Trying to read the drive IDs using physical access with admin rights Drive 0 - Primary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Trying to read the drive IDs using the SCSI back door Drive 4 - Tertiary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Trying to read the drive IDs using physical access with zero rights **** STORAGE_DEVICE_DESCRIPTOR for drive 0 **** Vendor Id = [] Product Id = [MAXTOR STM3160215AS] Product Revision = [3.AAD] Serial Number = [] **** DISK_GEOMETRY_EX for drive 0 **** Disk is fixed DiskSize = 160041885696 Trying to read the drive IDs using Smart Drive 0 - Primary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Hard Drive Serial Number__________: 6RA26XK3 Hard Drive Model Number___________: MAXTOR STM3160215AS And DiskId32 run on Windows Vista Ultimate 64-bit: To get all details use "diskid32 /d" Trying to read the drive IDs using physical access with admin rights Trying to read the drive IDs using the SCSI back door Trying to read the drive IDs using physical access with zero rights **** STORAGE_DEVICE_DESCRIPTOR for drive 0 **** Vendor Id = [MAXTOR S] Product Id = [TM3160215AS] Product Revision = [3.AA] Serial Number = [] **** DISK_GEOMETRY_EX for drive 0 **** Disk is fixed DiskSize = 160041885696 Trying to read the drive IDs using Smart Hard Drive Serial Number__________: Hard Drive Model Number___________: Notice how much lesser the information is on Vista, and how the Serial Number is not returned. Also the other tool, EnumDisk, refers to my hard disks on Vista as "SCSI" as opposed to "ATA" on Windows XP. Any ideas? EDIT 2: I'm posting the results from EnumDisks: On Windows XP SP2 32-bit: Properties for Device 1 Device ID: IDE\DiskMAXTOR_STM3160215AS_____________________3.AAD___ Adapter Properties ------------------ Bus Type : ATA Max. Tr. Length: 0x20000 Max. Phy. Pages: 0xffffffff Alignment Mask : 0x1 Device Properties ----------------- Device Type : Direct Access Device (0x0) Removable Media : No Product ID : MAXTOR STM3160215AS Product Revision: 3.AAD Inquiry Data from Pass Through ------------------------------ Device Type: Direct Access Device (0x0) Vendor ID : MAXTOR S Product ID : TM3160215AS Product Rev: 3.AA Vendor Str : *** End of Device List

  Read the article

• How to format drive in FAT 16 format using VB.NET without user interaction

  - by amita

  How to format drive in FAT 16 format using VB.NET without user interaction

  Read the article

• Do eSATA HDD docking stations have a capacity limit?

  - by Michael Kjörling

  I'm looking at perhaps buying an eSATA docking station to be able to easily plug in and unplug hard disk drives, particularly but not necessarily only for backup purposes. Note: This is not a hardware shopping recommendation question. Please don't vote to close it as such. Looking at different models, I find for example this page detailing the Deltaco SI-7908SUS which specifically states "storage capacity: 1.5 TB" as well as "pictured hard disk not included, only for illustration". A customer review specifically mentions that it does not work with 3 TB drives, although does not go into any detail such as OS, drive model, etc. From a brief glance, the vendor's web site does not appear to say either way. Then there is the quite similar Deltaco SI-7908B3 which boasts on the box "all 2.5" and 3.5" HDD/SSD compatible". My question is: Why would what basically amounts to a SATA/eSATA adapter have any say in what storage capacity devices are supported? Does it? Assuming the OS supports the full capacity of the drive, why should introducing another (not even a different, really) connector change anything? Bonus question: Might it make a difference if the docking station exposes multiple interfaces (such as in the case of for example the SI-7908SUS exposing USB 2.0 and eSATA)? (I still think it shouldn't, but it'd be nice to have it confirmed.)

  Read the article

• How to prevent autoplay and run my own app when inserting an USB-Flash drive

  - by Thomas

  when inserting an USB-Flash drive, Windows normally opens the Autoplay dialog that offers to browse the drive or if there are multimedia files it offers to choose an app to open them. We developed a media player that is connected to the USB-Drive and registers itself as Mass Storage Device. What I need is, that when inserting the Player that this Dialog is not shown, but instead my own application is launched. Ideally the application would be on the Flash Drive itself, but as I understood is that Autorun is disabled for USB-Drives. It would be enough if a preinstalled application is launched. I already tried to catch the WM_DRIVE_CHANGE message, but this only works if my application is the top most window, otherwise the Autoplay Dialog is displayed. Best Tom

  Read the article

• Stop Windows 7 from accessing or writing to hard drive unless "told" to by me? (More info inside...)

  - by Jeff

  A confusing question, perhaps, but bear with me. I have two internal HDDs set up in a RAID0 array which I use as mass storage. I access the drive very infrequently (once a day at most) and so I have set up Windows 7's power options to turn off idle disks after only 1 minute. This is fine, and the disks are turned off most of the time. However, I notice that Windows sometimes spins up the drives when I really, really don't want or need it to. This causes a 30 second delay as both drives spin up and lock up my system. Some examples of when this happens: 1) When I'm installing something using Windows Installer or Installshield; it seems to me as if they're using the drive with most available free space as the installer cache location... so my big RAID drive has to spin up! Most annoying. 2) Apparently, when I open a Java-based program which resides on my system drive and has nothing to do with my RAID drive! 3) At boot-up and shut-down time. At shutdown the drive spin up only for the computer to immediately shut down! Incredibly frustrating! I've already tried changing the letter of the drive, and at some points have removed the drive letter entirely, which solves the first two issues above. So my question (FINALLY!) is this: is there any way I can mark this drive as being for "storage only", so Windows basically does not see it at all until I actually invoke it somehow? Or is there any way I could set it up so that only specific programs have write access to it? For example, download managers, TeraCopy, etc. etc.? Basically I want it to be a "ghost drive" until I'm ready to use it and to stop Windows from spinning it up all the damn time! Thank you. :)

  Read the article

• Toshiba laptop cd drive read causes OS to totally freeze

  - by Fujishiro

  Okay I'll try to write an understandable summary. Forgive me if I'll fail with that attempt though. So. There is a Toshiba Satellite notebook. Got Windows 7 x86 Professional (OEM) installed on it, everything is fine (okay.. somewhat). The problem. If you put an audio or any kind of disc into the drive, something starts to eat the PC. Back then when the owner told me about this, he put an audio disc into the lappy. Winamp caused the IO load, 100%. Tried taskkill, taskkill /T, tried powershell, EVERYTHING. You just can NOT kill winamp or anything which becomes the blocker at that time. Even if you kill almost everything, laptop won't do a clear shutdown. Also I tried to use the force switch at 'shutdown' from cmd, but no use. (So: At these times you can use the laptop, but the blocker/explorer/disc becomes gray as a non-responding app. You can try to kill them, but that won't work, nor you can shutdown the machine). (Also tried using PID, but no use. For the highest IO I used the "select columns" from Task Manager and enabled the IO columns.) My first hunch was the problematic disc, autoplay and it tries to read tries to read (still shouldn't kill the PC). Disabled autoplay, removed winamp. Tried other software, etc. Everything was ok. Few days later the owner tried to put a disc into the machine and it started to reproduce the same symptoms but with a totally different disc. Uhm what to know. Virus is not an option, protected by BitDefender (valid license) and Spybot. Thanks if you have ANY idea about this strange problem. ps.: For now, the owner uses Daemon tools + Blindwrite as an alternative for those apps which wouldnt start without the disc.

  Read the article

• Fedora 9 not reconizing hard drive

  - by Andrew Jones

  I am installing Fedora 9 to a PC (specifications at the bottom) and have had a lot of trouble with it recognising the hard drive. To get the Fedora installer to recognize it in the first place I had to pass "ata_generic.all_generic_ide=1 pci=nomsi" to the kernel, after which it installed OK. However, now when I boot the installed OS, I get a "could not find filesystem '/dev/root'" error. I tried passing the same arguments to the kernel at boot as I did when installing but to no avail. I have tried using the default LVM layout and defining manual ones but it made no difference. There is no option in the BIOS to enable AHCI or anything like that, in fact the BIOS is very limited in most respects. I can get into the system by using the installation CD in rescue mode (with those extra kernal parameters) but I'm not sure what to do once in there... Unfortunately using a more recent version of Fedora or even another Linux distribution altogether isn't an option becuase of outside constraints - which is annoying since I know for a fact Ubuntu works fine on this setup. I have not been using Linux that long, so treat me like an idiot - I am one. Any help would be greatly appreciated, thanks! System spec: Intel Atom Z530 CPU @ 1.6 GHz Intel US15W chipset 1 GB DDR2 160 GB SATA harddisk (Samsung HM16HI) 1000 Mbit/s Ethernet port Phoenix BIOS

  Read the article

• Using UDF on a USB flash drive

  - by CesarB

  After failing to copy a file bigger than 4G to my 8G USB flash drive, I formatted it as ext3. While this is working fine for me so far, it will cause problems if I want to use it to copy files to someone which does not use Linux. I am thinking of formatting it as UDF instead, which I hope would allow it to be read (and possibly even written) on the three most popular operating systems (Windows, MacOS, and Linux), without having to install any extra drivers. However, from what I found on the web already, there seem to be several small gotchas related to which parameters are used to create the filesystem, which can reduce the compability (but most of the pages I found are about optical media, not USB flash drives). I would like to know: Which utility should I use to create the filesystem? (So far I have found mkudffs and genisoimage, and mkudffs seems the best option.) Which parameters should I use with the chosen utility for maximum compability? How compatible with the most common versions of these three operating systems UDF actually is? Is using UDF actually the best idea? Is there another filesystem which would have better compatibility, with no problematic restrictions like the FAT32 4G file size limit, and without having to install special drivers in every single computer which touches it?

  Read the article

• Identifying Hard Drive as performance bottleneck for desktop machines

  - by Programming Hero

  I'm working in a development team where we all use laptops so we can work in multiple locations. These laptops are proving notoriously slow for development work, but at a glance they all look to have the specification for a much faster experience: CPU - Intel Core 2 Duo T7500 Memory - 2GB of RAM We all experience the biggest delays when the hard-drives are being accessed, particularly when swap-files are being thrashed. After doing a little bit of profile, a colleague discovered that our HDDs are seeing Read/Write speeds of about 10MB/sec. This seems abnormally low and we believe it the cause of the problem. Sensibly (though somewhat annoyingly) our business wont blow money on faster drives just to see if it fixes the problem; we need to illustrate this is definitely the problem and that buying some solid-state drives will make it go away. I need some way of showing how 90% of the system resources aren't being used over the course of a day, and that whenever there is utilization, it's all in HDD reads or writes. Are there any tools I could use to provide this information? Does it seem likely the problem is going to be fixed by a faster drive? Should I be looking for alternatives?

  Read the article

• Using UDF on a USB flash drive

  - by CesarB

  After failing to copy a file bigger than 4G to my 8G USB flash drive, I formatted it as ext3. While this is working fine for me so far, it will cause problems if I want to use it to copy files to someone which does not use Linux. I am thinking of formatting it as UDF instead, which I hope would allow it to be read (and possibly even written) on the three most popular operating systems (Windows, MacOS, and Linux), without having to install any extra drivers. However, from what I found on the web already, there seem to be several small gotchas related to which parameters are used to create the filesystem, which can reduce the compability (but most of the pages I found are about optical media, not USB flash drives). I would like to know: Which utility should I use to create the filesystem? (So far I have found mkudffs and genisoimage, and mkudffs seems the best option.) Which parameters should I use with the chosen utility for maximum compability? How compatible with the most common versions of these three operating systems UDF actually is? Is using UDF actually the best idea? Is there another filesystem which would have better compatibility, with no problematic restrictions like the FAT32 4G file size limit, and without having to install special drivers in every single computer which touches it?

  Read the article

• Problem Installing Ubuntu 12.04 - [Errno 5]

  - by Rob Barker

  I'm trying to intall Ubuntu 12.04 to my brand new eBay purchased hard drive. Only got the drive today and already it's causing me problems. The seller is a proper proffesional company with 99.9% positive feedback, so it seems unlikely they would have sold me something rubbish. My old hard drive packed up last Tuesday and so i bought a new one to replace it. Because this was an entirely new drive i decided to install Ubuntu as there was no current operating system. My computer is an eMachines EM250 netbook. There's no disc drive so i am installing from a USB stick. The new operating system loads beautifully, and the desktop appears just as it should. When i click install i am taken to the installer which copies the files to about 35% and then displays this: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. The hard drive can be heard constantly crackling. When i booted Ubuntu 12.04 from my old faulty hard drive as a test, i didn't even make it past the purple Ubuntu screen, so it can't be that bad. Any ideas? Message to the moderators. Please do not close this thread. I'm well aware there may be other threads on this, but i don't want it closing as the others do not provide the answer i am looking for. Thank you.

  Read the article

• USB drive errors after airport scan

  - by bobobobo

  Well, I just got a new PNY usb drive and it passed through an airport scanner yesterday. For some reason, I wrote to it and then tried to read from it today, and it gave me a corrupted error! chkdsk reports errors like: Bad links in lost chain at cluster 1179 corrected. Lost chain cross-linked at cluster 1200. Orphan truncated. Lost chain cross-linked at cluster 1228. Orphan truncated. Lost chain cross-linked at cluster 1236. Orphan truncated. Lost chain cross-linked at cluster 1237. Orphan truncated. Lost chain cross-linked at cluster 1244. Orphan truncated. Lost chain cross-linked at cluster 1250. Orphan truncated. Lost chain cross-linked at cluster 1266. Orphan truncated. Lost chain cross-linked at cluster 1278. Orphan truncated. etc. What is this from? Could it possibly be from the airport scanner, or is it likely a defective USB chip? How can I check the chip to see if I should just return/throw it away or continue to use it?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >