Search Results

Search found 9349 results on 374 pages for 'rpg maker xp'.

Page 26/374 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• problem booting crusty old windows XP

  - by Carson Myers

  I have an acer aspire laptop running Windows XP home. I believe I have some virus on it, I'm not sure--I mostly just run linux in a VM on it so I wasn't too worried. I'm not sure if that virus caused this problem. The laptop wasn't recognizing my USB hard drive for some reason so I decided to restart it. When it started up, it got past the memory test, past the boot screen, (but it paused right here on a blank screen for awhile) and flashed the desktop once (like it does just before the login screen) and then crashed. I got a quick BSOD and then it restarted. Then it tried to boot again, etc etc infinite loop of failure. Well, before trying safe mode, I disabled automatic restart on system crash so I could read the blue screen. There wasn't anything important on it, it said *** STOP: 0x00000000 (0xC0000000 0x,.... ) beginning physical memory dump physical memory dump complete That's not verbatim (obviously) but it didn't help me. so I booted in safe mode, and it stopped on the driver gagp30kx.sys and then restarted (and infinite loop of failure again). I burned a recovery CD and tried that. It loaded it, and I went into repair mode. I ran chkdsk and then disabled the AGP driver. Same thing on booting in safe mode except it stopped at mup.sys instead. I enabled the AGP driver again, and ran chkdsk again from the CD. It said it found problems but didn't say it fixed them. So I ran it a second time, and it said "performing additional checking or recovery" lots of times (I can't tell how many, they went above the screen top). I tried booting again and no luck. Every time I run chkdsk after trying to boot again it says it found and fixed more errors. I think it might be whatever driver is after the AGP driver, but I don't know what it is or how to find out. Can anyone help me fix this?

  Read the article

• Cleaning a proxy/phishing trojan from Windows XP computer

  - by i-g

  I am trying to remove an interesting trojan from a Windows XP computer. It manifests itself as a phishing page (screenshot linked) that appears after the user tries to log on to eBay. So far, I haven't found any other web sites that are affected. As you can see, the trojan intercepts browser connections (all installed browsers are affected) and injects this phishing page. The address looks like it's ebay.com, but HTTPS verification doesn't work (no lock icon or green bar in Firefox.) At some point, Trojan.Dropper appeared on the computer. I removed it with Malwarebytes Anti-Malware. Although it reappeared several times, it seemed to be gone after I booted into Safe Mode and did a full system scan with MBAM. Now, however, a different trojan has appeared on the machine; I suspect it was installed by Trojan.Dropper. So far, MBAM, Ad-Aware, and Spybot S&D have been unable to remove it. I've looked for it in the HijackThis log but haven't found anything conclusive. Has anyone run across a trojan like this before? Where would I start looking for it to remove it manually? Thank you for reading.

  Read the article

• Windows XP consuming drive letters

  - by billdehaan

  This one's a bit of a stumper. I'm running XP SP3, current with all fixes, etc. My problem is that I can assign a drive letter to a container file (explained below), it works just fine. But once I close the container, the drive letter is no longer available until the next boot. I've got some confidential data that I've placed in a container volume. I've used TrueCrypt (www.truecrypt.com) and FreeOTFE (www.freeotfe.org), with both installed and portable versions for both, with the same result. I open the container file, assign it to a drive letter (say R:), and run some portable apps that are within the volume. When I'm done, I close the container, and the drive letter is released. Fine so far. However, when I attempt to re-open it, the previous drive letter (in this case R:) is no longer available. It's not mapped to anything, it's just unavailable. Even attempting something like "subst R: C:\" returns "Invalid Parameter - R:". I can use the S: drive, no problem, but the next day I have to use T:, then U:, etc. Eventually, I have to reboot to reclaim all of of the drive letters. Unfortunately, everything I've read about drive letters relates to USB assignments, which doesn't apply here. I've tried the "show hidden" command (set devmgr_show_nonpresent_devices=1) with no success. And the Disk Management tool doesn't apply either, since it's not a physical drive. Does anyone know where Windows keeps the list of drive letters? And is there anything short of a reboot that can be used to reset it?

  Read the article

• Why are folders disappearing in Windows XP?

  - by XenoFoxx

  I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the Windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and Windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

  Read the article

• Xp SP3 - Non-Functioning

  - by Josh

  Ok Here is a crazy problem, I have a HP dv6000 Laptop that can no longer hold a charge, so I hooked it up to my TV, bought a wireless mouse and keyboard and configured xp to run with the lid closed, It has medium to heavy usage mainly just streaming from sites like Netfilx, Hulu, ABC, etc. And playing movies I ripped of dvd. It ran fine for a while but recently it has been having some weird problems: Problem one: I used to use firefox but now when run it I can type but as soon as I click something it just shuts down, completely, I can't even close it unless I use taskmanager to do it. So I went and got google chrome which is better but still hit or miss, but never completely shuts down, I just can't click anything or type anything, or sometimes I just can't type anything or vice versa. Also when I open a new tab, and try to move back to my old one, it automatically closes the old tab when I click on it. Problem two: When using the internet I can't use any other application or anything windows (ie. Windows explorer) until I force quit all browsers with taskmanger. The reason I can't run anything is because I can't click on it. Problem three: When I try to play a movie (with vlc) Once it starts playing I can't click on anything, but I can use hotkeys, and once it stops everything is fine again. Well I hope somebody knows whats going on because I have no clue, If you need clarification or more info on something I would be happy to provide it...

  Read the article

• ping/ssh networking problem with server from 1 particular windows xp laptop

  - by user47650

  I am experiencing an odd problem with one specific server at my data centre connecting from my laptop. Basically the server is accessible from other machines in my house, but not from 1 particular laptop which is running windows XP. I have setup tcpdump on the server and wireshark on the laptop, and I can see ping echo request and reply packets that actually make it back to the wireshark on the laptop, but nothing shows in the ping console output like so; $ ping xxx.55.32.255 Pinging xxx.55.32.255 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for xxx.55.32.255: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), But I can see from the wireshark on my local laptop that the ping reply gets back... No. Time Source Destination Protocol Info 46 3.964474 192.168.1.64 xxx.55.32.255 ICMP Echo (ping) request Frame 46 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: Intel_31:d3:01 (00:19:d2:42:c3:01), Dst: ThomsonT_01:b8:2c (00:14:7f:02:b9:3c) Internet Protocol, Src: 192.168.1.64 (192.168.1.64), Dst: xxx.55.32.255 (xxx.55.32.255) Internet Control Message Protocol No. Time Source Destination Protocol Info 48 4.119060 xxx.55.32.255 192.168.1.64 ICMP Echo (ping) reply Frame 48 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: ThomsonT_01:b8:2c (00:14:7f:01:b8:2c), Dst: Intel_21:c3:01 (10:20:d2:31:c3:01) Internet Protocol, Src: xxx.55.32.255 (xxx.55.32.255), Dst: 192.168.1.64 (192.168.1.64) Internet Control Message Protocol obviously I have disabled the windows firewall and there is nothing in the windows event log. There is nothing else obviously strange about the server as it is the same build as other servers that I can connect to fine.

  Read the article

• Windows XP dual screen problems, user account related

  - by Chris

  I have had this issue with a few laptops now and it looks like it is some sort of user account problem. Specifics of the system are: Dell Laptop Windows XP Pro SP3 Non-domain member computer DLP Projector connected to laptop via VGA I use this setup almost daily to do presentations, always the mirrored display mode where I can see on the laptop monitor the same thing that is displayed on the projector. Today, when I boot up, I get the mirrored display at the login screen, but after I log in, it switches to Extended Desktop (like two desktops side-by-side). Fn+F8 just cycles through all the normal settings except the mirrored display. I created a new user account on the computer and it performs normally. Mirrored display works as normal. I have run into this about 4 times now and it always can be solved by creating a new user account on the computer, and then all is well. I would like to either: 1. Find a way to reset the customized settings for a specific user account which would hopefully make this go away, or 2. Find the specific setting that causes this so that I can easily fix it when the problem comes up. Creating new user accounts is kind of a pain and a easy fix must be out there somewhere.

  Read the article

• Windows 7 Can't Connect to Network Drive on Windows XP

  - by Alex Yan

  I have a Windows XP desktop and a Windows 7 laptop both connected to a TrendNET TEW-432BRP router, which is connected to the Internet. They both have static IPs. The desktop has an external hard drive connected to it. The laptop is wireless and the desktop is wired. I enabled sharing on the external hard drive about two years ago when I bought it. I mapped it as a network drive on the laptop. I think it was yesterday, the laptop just stopped recognizing any of the computers on my network (When I open network, my laptop's the only one on it). I also get an error message "An error occurred while connecting A: to \CERTIFIED-DATA\Expansion Microsoft Windows Network: The network path was not found. The connection has not been restored" when I try to connect to the network drive. Both computers run Avast, and there hasn't been any problems with it. This has happened before but I never figured out why and how to fix it. It's usually fixed when I reinstall the OS of the affected system. Edit: I can't navigate the computer using \\CERTIFIED-DATA. I get a message saying "Windows cannot access \CERTIFIED-DATA. Check the spelling of the name, Otherwise, there might be a problem with your network" I clicked diagnose on the message and it failed to find anything wrong I clicked diagnose on my wireless connection, and it just keeps trying to check if something is wrong with the connection I can ping it successfully

  Read the article

• Speeding up Outlook Express on Windows XP over satellite

  - by John

  My brother is in the field with Doctors Without Borders. I'm posting this question on his behalf. We use outlook express (on a pc running windows XP) and a 9600 baud dial up satellite phone modem to get our email direct from the server in Paris. As this is a very expensive way to communicate (our satellite bill is $50K a year, no joke), it seems like trying to streamline is a good idea. Here's the question- when we connect, the sequence goes: Send outbox mails. This goes pretty quickly, probably 10-15 seconds for each email, up to maybe a couple minutes for an email of 150k or so). The status bar moves pretty quickly, according to the emails sent. The system then says "Checking for new messages on (our account name), and "Receiving list of messages from server". This takes a long time. Like 10-15 minutes. The status bar crawls along. Then it receives the messages. "Receiving messages from server". Again, each message takes 10-15 seconds, and this part moves along reasonably fast. I'm curious as to what is going on in the second part. It takes forever, and doesn't seem to be part of the sending or receiving messages themselves. Is there a way to speed up the process by changing a preference with communicating with the server or something? Does anyone have any advice for him speeding up what Outlooks Express is doing? Obviously his software is ancient and adding more software is not realistic based on the connection speed. Thanks!

  Read the article

• Have local admin privileges on Windows XP, but getting "Error terminating process: Access is denied"

  - by Chris W. Rea

  On one of the Windows XP machines I use regularly, there is a process that starts up periodically. I'd like to be able to kill the process – sometimes – because it occasionally runs when I'm busy doing something machine-intensive. I've already tried dropping the process priority to "Idle" to mitigate the effects, but it isn't the CPU that's the problem. Rather, the process is very disk-intensive and no matter the process priority, it still causes significant disk thrashing when running, impacting everything else I'm doing at the time. Using Process Explorer, I can find the process, right-click, and choose Kill Process, but I always get the message "Error terminating process: Access is denied." This is not an operating system process, but third-party software. What might that process be doing to prevent itself from being terminated? How can I kill such a process? Is there a way for me to modify the process's security or access control list (ACL) somewhere, using Process Explorer or another tool, so that I can effectively kill it?

  Read the article

• Windows XP seemingly out of resources but plenty of free RAM and swap available

  - by Artem Russakovskii

  This one has been bothering me for years and so far I couldn't find an adequate solution. The problem occurs on pretty much every XP install I've done. After opening a variety of programs or the system running existing programs for a while, Windows seemingly runs out of resources, without telling me. There's ALWAYS free RAM. For example, it just happened to me and I had over a gig of free RAM. There are no viruses, spyware, or other nonsense - it is a Windows resource problem, but the question is which resource is it running out of, how does one pinpoint it, and how does one prevent it? Sometimes, this happens after running specific programs - for example, today it happened when I started Photoshop CS4 and Flash CS4 at the same time. I also noticed that restarting The Bat (email client by Ritlabs) seems to get rid of this problem for a while but again, this happens on machines that don't even have The Bat installed. So what does exactly happen? The symptoms are: pressing alt-tab doesn't bring up the list anymore - it just jumps to the next window instantly, very similar to the way Alt-Esc works, however in this case, it's due to not having enough resources to bring up the alt-tab menu random programs would randomly crash, citing random errors, out of memory errors, system resources, inabilities to do system calls, etc. random programs would start missing random parts - for example, Firefox top menus might disappear, pull up partial selections, or not pull up anymore altogether. IE might lose a few of its toolbars. Some programs might fail to redraw or would just plain go gray where the UI used to be. Windows itself never complains about running out of RAM, virtual memory, or anything at all, yet it's running out of something. The only clue I was able to find and apply the fix today was this Desktop Heap Limitation. I haven't confirmed the fix working as not enough time passed. In the meantime, what are everyone's thoughts?

  Read the article

• Windows XP restarting repeatedly after a fresh restore

  - by DWilliams

  I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

  Read the article

• Safe place to put an executable file on Windows 7 (and Windows XP)

  - by Ricket

  I'm working on a tweak to our logon script which will copy an executable file to the local hard drive and then, using the schtasks command, schedule a task to run that executable daily. It's a standalone executable file, and when run it creates a folder in the working directory (which would be the same directory as the executable in this case). In Windows XP, of course, it can be put anywhere - I'd probably just throw it in C:\SomeRandomFolder and let it be. But this logon script also runs on Windows 7 64-bit machines, and those are trickier with UAC and all that. The user is a local administrator but UAC is enabled, so I'm pretty sure that the executable would be blocked from copying to a location like C:\ or C:\Program Files (since those seem to be at least mildly protected by UAC). The scheduled task needs to run under the user's profile, so I can't just run it with SYSTEM and ignore the UAC boundaries; I need to find a path which the user can copy into. Where can I copy this standalone executable file, so that the copy operation succeeds without a UAC prompt on Windows 7, the path is either common to both WinXP and Win7 or uses environment variables, and the scheduled task running with user permissions is able to launch the executable?

  Read the article

• It takes a long time until Windows XP recognize I connected USB drive

  - by Pavol G

  I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

  Read the article

• `:Zone.Identifier` files keep on appearing in Windows XP virtual machine

  - by Jonathan Reno

  I have a Windows XP Home Edition guest and a Linux Mint 13 host. I use VirtualBox and the ~/Public directory is shared with the guest. It sometimes happens that I use IE on the guest system to download files (until I get a better Windows browser). All of the downloaded files go the the L:\ drive (the ~/Public directory). When they are finished downloading, Windows Explorer adds a :Zone.Identifier file for each file I download. When I extract a downloaded ZIP archive on the guest (on drive L:\), Windows creates a :Zone.Identifier file for every file in the extracted directory. This even occurs if I use the host to move a file to the ~/Public directory. The shared ~/Public directory is on an ext4 partition and the colon character is supposed to be illegal in file names in Windows, but not on the ext4 partition. Is there any way to stop Windows from putting all this rubbish on my filesystem? (I might have to create a shell script to clean up after Windows' act.) Here is what I see in Windows Explorer: By the way, if I were running a Mac OS X host (where colons are illegal file name characters) this would be even more horrendous.

  Read the article

• Broken filesystem on Windows XP / 7 virtual machine

  - by Pekka

  I created a virtual machine with Windows XP as the guest system in Microsoft's Virtual PC that ships along with Windows 7. I then installed Virtualbox and began running the MS machine in it. It worked fine. Then, I accidentally started the machine in Microsoft's Virtual PC again. The screen stayed blank, so after a while, realizing my mistake, I closed the Machine. Since then, the VM won't start any more, claiming massive file system problems. Starting Windows in normal mode results in a SOMETHING_FILESYSTEM blue screen; I can start in protected mode and run a checkdisk. That will fix something on every run, but every time I restart, it will start again. I tried re-booting the VM with the Windows CD and doing a repair install. I didn't watch whether that worked out, but I'm caught in the reset / check disk / reset cycle again. Is there anything VM specific that can still be done? On a physical machine, I would say reformat. Is there any way to get hold of the data on the virtual machine through either Virtual PC or Virtualbox? It was an experimental machine, but I had started entering some data on it that would be nice to recover.

  Read the article

• Windows XP can't connect to wireless network

  - by mikez302

  I have a desktop computer with a wireless card, running Windows XP SP3. For a little while, I had a remote network connection set up for my job, but I didn't need the remote connection so I deleted it. Now, I am unable to connect to the internet at all from that computer through my wireless router. I can connect through my router using my laptop, and I can connect through my neighbor's router using my desktop, but for some reason I can't connect through my own router using my desktop. I see the "Wireless Network Connection 5" icon in my system tray, but it tells me it is not connected. When I click on the icon, I see a list of wireless networks, including my own, which is set up to automatically connect, although it doesn't. When I try to connect to my network on my own (by clicking on it, then clicking "Connect"), it asks me for my network password like it usually does. I see a box come up saying "Waiting for network to be ready..." and it hangs there. On the list of wireless networks, my network says "Acquiring network address" but it doesn't actually connect. How can I fix this? I tried rebooting my computer, repairing my connection, and restarting my router, and I am still having this problem.

  Read the article

• Windows XP only loads in VGA mode, and crashes when raising resolution

  - by Harel

  My kid's computer (Windows XP, SP3) started to (what appears to be) crash on boot. It will only boot in Safe or VGA mode, and if I try to raise the resolution from 640x480 it just reboots itself, and a error appears in the Event Log. When it loads up not in VGA mode, the monitor shuts off just after the windows logo is shown. It seems like windows is actually running but I can't see anything on screen (monitor is off for lack of signal). Nothing was installed recently that I know of, short of the usual windows updates. Thanks, Harel Below is the event log error: Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 15/04/2012 Time: 16:27:11 User: N/A Computer: ----- Description: Error code 1000008e, parameter1 c0000005, parameter2 f745b0bf, parameter3 ede24f98, parameter4 00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 38 1000008 0020: 65 20 20 50 61 72 61 6d e Param 0028: 65 74 65 72 73 20 63 30 eters c0 0030: 30 30 30 30 30 35 2c 20 000005, 0038: 66 37 34 35 62 30 62 66 f745b0bf 0040: 2c 20 65 64 65 32 34 66 , ede24f 0048: 39 38 2c 20 30 30 30 30 98, 0000 0050: 30 30 30 30 0000

  Read the article

• Unable to remove Read-Only attribute from folder in Windows XP

  - by elcuco

  I have this directory which I cannot remove the read only attribute from. The computer is running XP SP2 (or SP3, not sure) and the directory sits in a NTFS file system. Looking into the web I found this: http://support.microsoft.com/kb/256614 which tells that if the directory is "customized" it's treated as a system folder and thus "read only". I don't think this is a scenario in my case, but anyway it's not helping, their recommendation is more or less: attr -r -s /d /s d:\data and this is not working for me. Any other ideas? More info: The directory is served to an HTTP server (wamp) and the directory is an SVN check out. What happens is that the web server cannot write files into the directory (imagechace from drupal is you are really interested). Edit 2: The original post claimed that the directory sits on a VFAT FS, however I booted Fedora 11 from livecd and the partition is marked as NTFS. Edit 3: I left the company which I worked on, on which this situation happened... so I cannot fully close this question. But things get even worse: I tested the "attr -r" answer I put, it did not work for me, and now the developer said that it worked for her. A nice WTF moment. Probably a reboot helped... Sorry for loosing details. If anyone has the same problem, and one of the answers helps him - please comment.

  Read the article

• replacing the default console emulator under Windows XP

  - by Gilles

  How can I replace the default program providing console windows under Windows XP? I know of alternative programs, and I have a shortcut to start cmd.exe in Console2. But now I want console applications to start in Console2 rather than the default console program, even when I have no control over the program that starts the console application. (I.e. a non-console program starts consoleapp.exe, and I can't change it to start Console2 instead, but I still want the application to be started inside a new instance of Console2.) (Note that I want to replace the console itself, that is, the window in which console (i.e. text mode) applications run. And I must be able to run arbitrary, unmodified console applications: a substitute for a specific console program such as Cmd won't do me any good.) EDIT: So what I'm after is a CSRSS replacement, which leads to OT: I want to know when Microsoft is going to make a decent CSRSS replacement. Not being able to adjust the width of a "terminal" by resizing the window is a complete joke. Go download the ISE already. (It's included in Win7/2008R2.) But as far as I understand this ISE is an environment for Powershell, not a general console emulator.

  Read the article

• Cannot log into Windows XP Embedded after changing computer name

  - by bignis

  Hi everyone, I purchased a tablet pc running Windows XP Embedded. The tablet was used in a medical clinic on a domain. For illustrative purposes, say the computer name was "COMPLEXCOMPUTERNAME". There was an administrator account, so I changed the password on account "COMPLEXCOMPUTERNAME\Administrator" to a blank password. I logged out and logged in successfully with the blank administrator password when the log-in dialog said "Log in to COMPLEXCOMPUTERNAME (this computer)". Next I renamed the computer from COMPLEXCOMPUTERNAME to SIMPLECOMPUTERNAME, which required a reboot. I did so, and I can't log in anymore. The log in screen still just says "Log in to COMPLEXCOMPUTERNAME (this computer)", but the account "COMPLEXCOMPUTERNAME\Administrator" no longer works. I suspect that this is because the computer has been renamed to SIMPLECOMPUTERNAME and it can no longer find the account. The "Log in to" dropdown can't be typed in, so I can't change the computer name Windows is trying to log into. I fear that I'm stuck. Is there a way I can get Windows to log into the computer name that I chose? Thanks! -Mike

  Read the article

• mshtml.dll latest version for Internet Explorer 8, Windows XP Service Pack 3

  - by AllSolutions

  Many applications in my system (Internet Explorer 8, Yahoo Messenger, Skype 10) are crashing and error details shows module name mshtml.dll. I checked the version of mshtml.dll in system32 folder. It is 8.0.6001.19170. My Internet Explorer version is 8.0.6001.18702. I am not concerned about crash of IE, because I generally use Firefox, but how do I solve the crashes in other applications, which are due to mshtml.dll? I have moved to Windows XP Service Pack 3 (32 bit). I have tried to update Internet Explorer 8 (from Tools-Windows Update), but again it crashes. I can not migrate to IE 9, as it requires Vista or Windows 7. I have applied Cumulative Security update for IE8, which has this file name: IE8-WindowsXP-KB2618444-x86-ENU.exe I could not get much info from Microsoft sites or Google. I do not want to use Automatic Updates feature of Windows. Can somebody give the download links for mshtml.dll and any associated files, which I can replace in system32 folder? Thanks.

  Read the article

• Xampp can't start apachem windows xp

  - by jribeiro

  I formatted my computer a week ago. Installed wampp on windows xp, git and everything I needed. When I run git for the first time it told me it had a problem with my user folder (because of the accents) so I created a new user and migrated everything to the new one. After this wampp wouldn't start anymore. I uninstalled it and installed xampp which is what I'm using now. My problem is that even though I requesed xampp to install Apache as a service it isn't installed. It doesn't show in windows services screen. Xampp control panel shows mysql service running ok. When I click to install apache as a service it returns no error. When I click start apache no error is outputed. No file and no errors under c:/xampp/apache/log/ If I restart computer it says that apache service is not installed. I tried to reinstall wampp and the same problem occurs. If I run netstat -a -no nothing is running on port 80! What can I do??

  Read the article

• Dual-monitor Windows XP, monitors are "identified wrong"

  - by Susan

  Trying to use a dual-monitor desktop system with Windows XP.... 1 graphics card... with digital/analog outputs. Picking: Desktop - Properties - Settings - Identify It shows "2" as my left monitor... and "1" as my right. How do I switch them around? Here's what I've tried so far: Switch the cables (I can't. I need the digital cable on the better monitor.) Switch the monitors (I can't. One has a few dead pixels.) Drag the 1+2 graphics around (That doesn't change the IDENTIFY numbers.) Pick "use as primary" or "extend" (That doesn't change the IDENTIFY numbers.) Anything else I can try? What exactly controls/switches the "IDENTIFY numbers" around? I know it can be done. For weeks I ran this exact set-up... with the CORRECT numbers appearing on the monitors.... then just recently... after a few reboots... they now appear "switched around".

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >