Search Results

Search found 1931 results on 78 pages for 'sh'.

Page 26/78 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• 12.04.1 no audio through HDMI

  - by JoJo

  having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

  Read the article

• lower-case 'c' key not working in bash

  - by gavin

  This is a bit of a strange one. I'm running Ubuntu 12.04. It's been working well but today, I ran into a hell of strange phenomenon. I can no longer type a lower-case 'c' in bash. At first I thought it was a misconfiguration for the gnome terminal but I tried both a stock xterm and directly at the console (ctrl+alt+F1) and the issue was the same. I can type an upper-case C without any difficulty and I can type lower-case 'c' in any other terminal based program (vim, bash, less, etc.). The lower 'c' also works if I jump into plain old sh. I looked at all the configuration files I know of and haven't found anything incriminating in there. I suspect it's not going to be that simple anyway because if I run bash with the '--norc' option from within sh, the problem remains. I don't know what else to check. In fact, if I wanted to cause this problem on a given machine, I have no idea how it could be done. Total mystery.

  Read the article

• Why is sudo bash different from regular bash

  - by cyberjar09

  Problem description : I am using something called play framework in my development which requires me to make the python script play available in the path. Hence I create a symbolic link in /usr/local/bin ... Now I have written a shell script (call it status.sh) which calls this python script as follows : play status <some values here related to my app> &> /tmp/xyz.txt and this shell script then sends me the file via email. This works perfectly when I execute the script as follows ./script.sh. However when the script is executed as a cron expression everyday I get an output from stderr saying 'play: command not found'. Hence I did some digging on my own and here are my findings : echo $PATH when I am on the shell shows that I have /usr/local/bin available to me hence I can successfully execute the command play status however when I type in sudo bash and then echo $PATH I do not have the path /usr/local/bin anymore. It is a limited set of folders (one of them being /usr/bin). Q : Why this behavior ?! I fail to understand why the path is different. Also as a workaround would you suggest I do : new symbolic link from /usr/bin to /usr/local/bin (what are the side effects of this?) remove /usr/local/bin sym link altogether and only use /usr/bin is there a convention that I am not following here for linking new programs and executing them from $PATH ? Thanks.

  Read the article

• /tmp shows 690 Mb full, actual size 72 K, Why?

  - by Ankit

  Why is /tmp diretory on my system showing 690 Mb full, whereas du -sh /tmp shows only 72K full. drwxrwxrwt 2 lightdm lightdm 4096 Aug 29 21:49 at-spi2 drwx------ 2 ankit ankit 4096 Aug 29 21:50 keyring-0JTfoY drwx------ 2 ankit ankit 4096 Aug 29 21:44 keyring-rChLLL drwx------ 2 root root 16384 Jul 22 02:10 lost+found drwx------ 2 ankit ankit 4096 Jan 1 1970 orbit-ankit drwx------ 2 lightdm lightdm 4096 Aug 29 21:50 pulse-2L9K88eMlGn7 drwx------ 2 root root 4096 Aug 29 21:44 pulse-PKdhtXMmr18n drwx------ 2 ankit ankit 4096 Aug 29 21:50 pulse-zR1TZUAZfmQW drwx------ 2 ankit ankit 4096 Aug 29 21:44 ssh-dlslOXOq2203 drwx------ 2 ankit ankit 4096 Aug 29 21:50 ssh-MrQQVRyy3316 -rw------- 1 ankit ankit 0 Aug 29 21:45 tmp0qnNG4 -rw------- 1 ankit ankit 0 Aug 29 21:50 tmpVvSMt6 -rw------- 1 ankit ankit 0 Aug 29 21:49 tmpy9Gadz -rw-rw-r-- 1 lightdm lightdm 0 Aug 29 21:44 unity_support_test.0 ankit@duster:/tmp$ df -h df: `/home/ankit/.gvfs': Transport endpoint is not connected Filesystem Size Used Avail Use% Mounted on /dev/sda1 79G 11G 65G 14% / udev 2.9G 4.0K 2.9G 1% /dev tmpfs 1.2G 868K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 220K 2.9G 1% /run/shm /dev/sda7 38G 690M 35G 2% /tmp /dev/sda5 93G 26G 63G 30% /home /dev/sda6 93G 1.6G 87G 2% /boot /dev/sda3 154G 69G 78G 48% /home/mount_150 ankit@duster:/tmp$ ankit@duster:/tmp$ ankit@duster:/tmp$ sudo du -sh /tmp/ 72K

  Read the article

• Source-control your BI Publisher reports

  - by Dmitry Nefedkin

  Version control systems (VCS) like Subversion, Git and the others has been widely adopted and became the must-have tool in any software development project. Source artifacts and checked out, modified, checked in, all the history of changes is tracked by the VCS.  But what if the development tool stores the source/configuration artifacts not in your laptop's hard drive, but in some shared repository instead? Well, we definitely need a way for export/import our artifacts from/to this repository.   Oracle BI Publisher report development approach is based on such a shared repository model (catalog), and starting from BI Publisher 11.1.1.5 Oracle ships Catalog Utility, which can be utilized to export/import the reports from the command line.  To start using the BI Publisher Catalog Utility you should: Go to the file system of the server where BI Publisher binaries has been installed and locate the following file: <MW_HOME>/Oracle_BI1/clients/bipublisher/BIPCatalogUtil.zip Copy the file to your local filesystem and unzip it. I will refer to this unzipped directory as <BIP_CLIENT_DIR> below If you do not want to pass server BI Publisher server URL, username and password during each invocation, modify the corresponding values inside <BIP_CLIENT_DIR>/config/xmlp-client-config.xml Open the terminal window and go to <BIP_CLIENT_DIR>/bin Make sure that the following environment variables are set: JAVA_HOME, ORACLE_HOME Now it's time to run the utility: if you are on Linux - just run BIPCatalogUtil.sh and pass the parameters according to the utility documentation if you are on MS Windows the bad news are that the command script for MS Windows is missing, and support.oracle.com note 1333726.1 says that a temporary solution is "create a .cmd file by setting up a classpath and copying the same commands from the .sh script". The good news are that I've created this script already,  please download the it from GitHub Hope you will find this utility useful during you day-by-day BI Publisher development. 

  Read the article

• Can't start webcam for google video services

  - by wisemonkey

  I've got Ubuntu 11.10 64 bit and have installed the google video chat plugin. However webcam doesn't seem to work (black screen -- no video at all). For cheese it works but shows really bad (black and white kinda) image. Following some link I installed guvcview if I start it then image looks neat. Any suggestions on how can it be fixed? If it helps I've tried the solution: $ sudo mv /opt/google/talkplugin/GoogleTalkPlugin /opt/google/talkplugin/GoogleTalkPlugin.old $ sudo gedit /opt/google/talkplugin/GoogleTalkPlugin and putting following lines in: #!/bin/sh LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old OR #!/bin/sh LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old Cause I've both files. Finally $sudo chmod +x /opt/google/talkplugin/GoogleTalkPlugin.old I closed and reopened chrome then started gmail tried video call -- black screen :-/ Ok so today finally google+ provided me with trouble shoot link and advised me: The plug-in won't install If you're having trouble installing the plug-in, or are receiving a message asking you to reinstall it, you should check to make sure your configuration is right. To do so simply: Check to make sure the Google Talk Plugin Video Accelerator and Google Talk NPAPI Plugin are enabled. If you're using Chrome you can type about:plugins in your browser to display your plug-ins. Make sure you're not using Internet Explorer 64-bit (this is a browser version that is 64 bit as opposed to 32 bit). Ensure that you don't have any "click to run" extensions enabled. If you're still experiencing this issue after checking your configuration you can follow these steps: Refresh the browser page. Close any running Google Talk plug-in processes. Close all open and running browser processes. Restart your computer. Uninstall and then reinstall the plug-in. Try a different browser such as Google Chrome or Mozilla Firefox. I looked in about:plugins for chrome and firefox: I don't have Google Talk NPAPI Plugin, does that matter? and I thought its installed with google talk plugin or no?

  Read the article

• Is there any way to kill a zombie process without reboot?

  - by Pedram

  Is there any way to kill a zombie process without reboot?Here is how it happens: I wanted to download a 12GB torrent.After adding the .torrent file, transmission turned into a zombie process.I tried ktorrent too.Same behavior.Finally I could download the file using µTorrent but after closing the program, it turns into a zombie as well. I tried using kill skill and pkill with different options and -9 signal but no success. In some answers in web I found out killing the parent can kill the zombie, but killing wine didn't help either. Is there another way? Edit: ps -o pid,ppid,stat,comm PID PPID STAT COMMAND 7121 2692 Ss bash 7317 7121 R+ ps pstree output: init---GoogleTalkPlugi---4*[{GoogleTalkPlug}] +-NetworkManager---dhclient ¦ +-{NetworkManager} +-acpid +-apache2---5*[apache2] +-atd +-avahi-daemon---avahi-daemon +-bonobo-activati---{bonobo-activat} +-clock-applet +-console-kit-dae---63*[{console-kit-da}] +-cron +-cupsd +-2*[dbus-daemon] +-2*[dbus-launch] +-desktopcouch-se---desktopcouch-se +-explorer.exe +-firefox---run-mozilla.sh---firefox-bin---plugin-containe---8*[{plugin-contain}] ¦ +-14*[{firefox-bin}] +-gconfd-2 +-gdm-binary---gdm-simple-slav---Xorg ¦ ¦ +-gdm-session-wor---gnome-session---bluetooth-apple ¦ ¦ ¦ ¦ +-fusion-icon---compiz---sh---gtk-window-deco ¦ ¦ ¦ ¦ +-gdu-notificatio ¦ ¦ ¦ ¦ +-gnome-panel ¦ ¦ ¦ ¦ +-gnome-power-man ¦ ¦ ¦ ¦ +-gpg-agent ¦ ¦ ¦ ¦ +-nautilus---bash ¦ ¦ ¦ ¦ ¦ +-{nautilus} ¦ ¦ ¦ ¦ +-nm-applet ¦ ¦ ¦ ¦ +-polkit-gnome-au ¦ ¦ ¦ ¦ +-2*[python] ¦ ¦ ¦ ¦ +-qstardict---{qstardict} ¦ ¦ ¦ ¦ +-ssh-agent ¦ ¦ ¦ ¦ +-tracker-applet ¦ ¦ ¦ ¦ +-trackerd ¦ ¦ ¦ ¦ +-wakoopa---wakoopa ¦ ¦ ¦ ¦ ¦ +-3*[{wakoopa}] ¦ ¦ ¦ ¦ +-{gnome-session} ¦ ¦ ¦ +-{gdm-session-wo} ¦ ¦ +-{gdm-simple-sla} ¦ +-{gdm-binary} +-6*[getty] +-gnome-keyring-d---2*[{gnome-keyring-}] +-gnome-screensav +-gnome-settings- +-gnome-system-mo---{gnome-system-m} +-gnome-terminal---bash---ssh ¦ +-bash---pstree ¦ +-gnome-pty-helpe ¦ +-{gnome-terminal} +-gvfs-afc-volume---{gvfs-afc-volum} +-gvfs-fuse-daemo---3*[{gvfs-fuse-daem}] +-gvfs-gdu-volume +-gvfsd +-gvfsd-burn +-gvfsd-http +-gvfsd-metadata +-gvfsd-trash +-hald---hald-runner---hald-addon-acpi ¦ ¦ +-hald-addon-cpuf ¦ ¦ +-hald-addon-inpu ¦ ¦ +-hald-addon-stor ¦ +-{hald} +-hotot---xdg-open ¦ +-3*[{hotot}] +-indicator-apple +-indicator-me-se +-indicator-sessi +-irqbalance +-kded4 +-kdeinit4---kio_http_cache_ ¦ +-klauncher +-kglobalaccel +-knotify4 +-modem-manager +-multiload-apple +-mysqld---10*[{mysqld}] +-named---10*[{named}] +-nmbd +-notification-ar +-notify-osd +-pidgin---{pidgin} +-polkitd +-pulseaudio---gconf-helper ¦ +-2*[{pulseaudio}] +-rsyslogd---2*[{rsyslogd}] +-rtkit-daemon---2*[{rtkit-daemon}] +-services.exe---plugplay.exe---2*[{plugplay.exe}] ¦ +-winedevice.exe---3*[{winedevice.exe}] ¦ +-3*[{services.exe}] +-smbd---smbd +-snmpd +-sshd +-timidity +-trashapplet +-udevd---2*[udevd] +-udisks-daemon---udisks-daemon ¦ +-{udisks-daemon} +-upowerd +-upstart-udev-br +-utorrent.exe---8*[winemenubuilder] ¦ +-{utorrent.exe} +-vnstatd +-winbindd---2*[winbindd] +-2*[winemenubuilder] +-wineserver +-wnck-applet +-wpa_supplicant +-xinetd System monitor and top screenshots which show the zombie process is using resources:

  Read the article

• How do I source a shell script for Node Version Manager?

  - by Matthew Patrick Cashatt

  Hi and thanks for looking! I am new to Linux/Ubuntu, but I have set up an Ubuntu box on which to run Node.js. I have had moderate success, but now I need to be able to easily upgrade my version of Node. Many folks recommend using Node Version Manager. I followed the directions, but when I try to do something like this: nvm ls I get a messaging stating that No command NVM found I have gone back to check the steps I followed to install NVM, but there is one part that is tricky for may and I think to be the culprit: sourcing the file for bash. From the instructions: To activate nvm, you need to source it from your bash shell . ~/nvm/nvm.sh I always add this line to my ~/.bashrc or ~/.profile file to have it automatically sources upon login. Often I also put in a line to use a specific version of node. So which file should I add this to? I am guessing profile since it's ubuntu?? Also, where in the file do I add this line? After I have added this line, do I need to reboot or anything? Any help would be deeply appreciated--especially if you can show me an example profile file with . ~/nvm/nvm.sh integrated so that I can see usage. Thanks, Matt

  Read the article

• How can I use a script to control a VirtualBox guest?

  - by TheWickerman666

  Refer to : Launch an application in Windows from the Ubuntu desktop I was wondering if Takkat could elaborate on the actual execution i.e. howto in the script file. This will be greatly helpful. Thanks in advance my script file InternetExplorerVM.sh looks like this, execution is /path/to/InternetExplorerVM.sh "C:\Program Files\Internet Explorer\iexplore.exe" #!/bin/bash # start Internet Explorer inside of a Windows7 Ultimate VM echo "Starting 'Internet Explorer' browser inside Windows7 virtual machine" echo "" sleep 1 echo "Please be patient" VBoxManage startvm b307622e-6b5e-4e47-a427-84760cf2312b sleep 15 echo "" echo "Now starting 'Internet Explorer'" ##VBoxManage --nologo guestcontrol b307622e-6b5e-4e47-a427-84760cf2312b execute --image "$1" --username RailroadGuest --password bnsf1234 VBoxManage --nologo guestcontrol b307622e-6b5e-4e47-a427-84760cf2312b execute --image "C:\\Program/ Files\\Internet/ Explorer\\iexplore.exe" --username RailroadGuest --password bnsf1234 --wait-exit --wait-stdout echo "" echo "Saving the VM's state now" VBoxManage controlvm b307622e-6b5e-4e47-a427-84760cf2312b savestate sleep 2 #Check VM state echo "" echo "Check the VM state" VBoxManage showvminfo b307622e-6b5e-4e47-a427-84760cf2312b | grep State exit My apologies for any mistakes, this is my first time posting on askubuntu.Thanks a ton in advance. This has been very helpful. Need this for BNSF guests, their Mainframe emulator works exclusively on Java enabled Internet Explorer.

  Read the article

• What went wrong with my curl install?

  - by Danjah

  I'm fresher than the prince to Linux, I've been following the instructions here: http://chrisfulstow.com/running-node-js-on-windows-with-virtualbox-and-ubuntu (the link tells what I am generally trying to do). I'm all up and running in VBox, and am at the curl install part, I may have done the curl part a week ago I forget. So I ran this command anyway: danjah@danjah-VirtualBox:~$ sudo apt-get install curl Result: [sudo] password for danjah: Reading package lists... Done Building dependency tree Reading state information... Done curl is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Then: $ curl http://npmjs.org/install.sh | sudo npm_install=rc sh Result: fetching: { gzip: stdin: unexpected end of file /bin/tar: Child returned status 1 /bin/tar: Error is not recoverable: exiting now It failed Should I be concerned? How can I test curl? How can I avoid these situations? Perhaps there's a generic way of checking to see if I've already installed packages/etc? Case specific answers and general advice most appreciated. cheers, d

  Read the article

• JDK8 New Build Infrastructure

  - by kto

  I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

  Read the article

• How to start WebLogic Server using default scripts?

  - by Luz Mestre-Oracle

  There are a few common issues reported when starting weblogic server using scripts. 1. User is not able to access weblogic console. 2. After a few days/hours weblogic server stops abruptly. 3. When user closes putty, they are not able to connect to weblogic server anymore. 4. When user closes windows command prompt, they are not able to connect to weblogic server anymore. 5. Weblogic is started using startManagedWebLogic.cmd/startManagedWebLogic.sh. By default, WebLogic Server does not run in background mode, so after you close the window the process finishes as well. In Linux/Unix based platforms, you need to use: nohup ./startManagedWebLogic.sh <Server> <URL> & In Windows platforms, you need to start Managed Servers using Windows Services: How to Install MS Windows Services For FMW 11g WebLogic Domain Admin and Managed Servers (Doc ID 1060058.1) http://docs.oracle.com/cd/E23943_01/web.1111/e13708/winservice.htm There a few more reasons that could cause similar symptoms, like JVM crash, signals sent by the Operating System, and many other reasons.  But the above steps is the first one to start. Enjoy!

  Read the article

• SteamCMD can't add files to my home directory

  - by Angle O'Saxon

  I'm trying to clean up the administration of some game servers I run on a Ubuntu box, part of which has been finally setting permissions properly so I can run the Steam console tool that controls updates and such. I had been running it as root using sudo, but I changed the permissions so that I can start it as a regular user rather than root. That bit seems to work fine, but now when SteamCMD actually starts, it errors with the following output ./steam.sh: line 24: /home/angleosaxon/.steampid: Permission denied Installing breakpad exception handler for appid(steam)/version(1334262703) SteamUpdater: Error: Couldn't create directory /home/angleosaxon/Steam/package, got error 13 [ 0%] Download complete. [----] Verifying installation... unlinked 0 orphaned pipes [----] !!! Fatal Error: Steam failed to load: *SteamStartEngine(0xbfa7cfa0) failed with error 1: Failed to open logfile /home/angleosaxon/Steam/steam.log Leaving aside the question of why it wants to add this information to my home directory, why is it getting access denied errors? As I understand it, since it's being run by my account, it operates with my permissions, so it should be able to read/write from my home directory, shouldn't it? This is the command I'm using to run it: /opt/steamcmd/steam.sh "+login UserAccount \"This is not my actual password.\"" +force_install_dir $ServerDir "+app_update 215360 validate" +quit

  Read the article

• what other bash variables are available during execution such as $USER that can assist on my script?

  - by semi-newbie

  This is related to question 19245, in that one of the responders answered the question in an awesome way, and very VERY clear to any newbie. Now here is a question that i can't seem to figure. i wrote a script for starting the vmware firefox plugin (don't worry. i gave that up and now run vBox VERY happily. i left vmware for my servers :) ) I needed to start the plugin as sudo, but i also needed to pass an argument (password) to it, that happen to be the same. So, if my password was Hello123, the command would be: sudo ./myscript.sh hi other Hello123 running from command line, the script would ask for my sudo password and then run. i wanted to capture THAT password and pass it as well. i also wanted to run graphically, so i tried gksudo, and there is an option -p that returns the password for variable assignment. well, that was a nightmare, because i would still get prompted for the original sudo: see below Find UserName vUser=$USER Find password (and hopefully enable sudo) vP=gksudo -p -D somedescriptiontext echo Execute command gksudo ./myscript.sh hi $vUser $vP and i still get prompted twice. so my question is tri-fold: is there a variable i can use for the password, just like there is one for user, $USER? is there a different way i should be assigning the value resulting of the command i have in $vP? i am wondering if executing the way i have it, does it in an uninitiated session and not the current one, since i am getting some addtl warning type errors on some variables blah blah i tried using Zenity to just capture the text, but then of course, i couldn't pass that value to sudo, so i could only use as a parameter, which puts me back in 2 prompts. Thanksssssssssss!

  Read the article

• How to correctly write an installation or setup document

  - by UmNyobe

  I just joined a small start-up as a software engineer after graduation. The start-up is 4 year old, and I am working with the CEO and the COO, even if there are some people abroad. Basically they both used to do almost everything. I am currently on some kind of training phase. I have at my disposition architecture, setup and installation internal documentation. Architecture documentation is like a bible and should contain complete information. The rest are used to give directions in different processes. The issue is that these documents are more or less dated, as they just didn't have the time to change them. I will be in charge of training the next hires, and updating these documents is part of my training. In some there is a lot of hard-coded information like: Install this_module_which_still_exists cd this_dir_name_changed cp this_file_name_changed other_dir_name_changed ./config_script.sh ./execute_script.sh The issues i have faced : Either the module installation is completely different (for instance now there is an rpm, or a different OS) Either names changed, and i need to switch old names by new names Description of the purpose of the current step missing. Information about a whole topic is missing Fortunately these guys are around and I get all the information I want and all the explanations I need. I want to bring a design to the next documents so in the future people don't feel like they are completely rewriting a document each time they are updating it. Do you have suggestions? If there is a lightweight design methodology available online you can point me to it's nice too. One thing I will do for sure is set up a versioning repository for the documents alone. There is already one for the source code so I don't know why internal documents deserve a different treatment.

  Read the article

• Multisystem Script won't work! "Syntax error:redirection unexpected" Worked 2 days ago?

  - by user74005

  this is my first question. I use Multisystem all of the time and have installed it on both Kubuntu and Ubuntu and have used it with no issues. I wiped my hard drive to try some new OSs I'm now using the exact same OS (Ubuntu 12.05) I used to load my USB stick to begin with and now I'm getting this ridiculous syntax error. I know the script is correct, I'm following the exact same steps I used to get to this point and I'm getting different results ?!?! I'm very confused by this. I have no clue how to begin addressing this issue. I get the same syntax error on Kubuntu now too, which did have multisystem installed. I run "sh install-depot-multisystem.sh" and get "Syntax error:redirection unexpected", this worked literally 2 days ago. The only thing that has changed is my face has grown some more facial hair and my head hurts from bangin it against the wall over this issue. The OS is exactly the same, the script is the same; but now it won't install. I'm lost and really hoping someone can help. Append Just to append to this a bit https://lists.ubuntu.com/archives/ub...er/000264.html I needed to do a chmod 777 on the script, I'm still getting a syntax error on Kubuntu...but it did install successfully. I'll mark this as resovled! Thanks anyway, I'll try to spruse up on my Linux skills.

  Read the article

• ??OSW (OSWatcher Black Box) ????

  - by Feng

     OSWatcher Black Box, ??OSW,?oracle???????????????,?????OS??????????OS??????????,??CPU/Memory/Swap/Network IO/Disk IO?????? +++ ????????OSW? OSW?????????,????????????????,???mrtg, cacti, sar, nmon, enterprise manger grid control. ????OSW?????: 1. ???????,???????2. ???????,????CPU,???????????3. ???????,????????????????????????OS? ???????OS???,??OS?????,?????????????;??????????????????????,???????. ???????,????????:?????????,??????????,????????????(root cause),?????????????????????????,OSW??????,??????: 1. ??????????OS??????????????????????????OSW??,?????????OS??,??????DB/???? 2. ??ORACLE Database Performance???,?????????????OS??????OS?????????????Swapping,???????????????,?????????,???AWR?????????latch/mutex?????? 3. ??????????????AWR??????????,top5??????????;?CPU,??,Swap, Disk IO?????????????OSW??????????,????????????????????????OSW???,??????????????? 4. ?????ORA-04030?????CJQ0, P00X, J00X?????????,???????OSW,???????????????????OS????????? 5. ????server process??hung?,??????OSW????????????????suspend???,?????????CPU/Memory? 6. ??Listener hung???,?????OSW??????????????? 7. Login Storm??:????????????,????,????ASH,AWR????????????????OSW?ps?????,??????, oracle ?server process????????? ???,OSW????????????????????OS?????????????,??????DBA???OSW??????????????OSW,????DB Performance????,????????OSW???? +++ ?????OSW??????: 1. ??????????????,???????,???????? 2. OSW???????? OSW??????????????OS???????,??ps, vmstat, netstat, mpstat, top;????????????????? ?????????CPU, Disk IO, Disk Space, Memory;???????????????,??????????????????????????,??OSW????????:?????????,CPU????90%??;???free space???????????????????????????,??OSW????????? +++ ????????UNIX/LINUX???/??OSW: 1. ???301137.1???OSW 2. ????????(/tmp??),??????????root?? $ tar xvf osw.tar 3. ?? $ nohup ./startOSWbb.sh 60 48 gzip & ????????,??OSW,????60???????,???????48?????(??????????),???????gzip?????? 4. ????? $ ./stopOSWbb.sh ?????????archive???? ????????????????????OSW???????,???????

  Read the article

• Installing Catalyst 11.6 for an ATI HD 6970

  - by David Oliver

  Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

  Read the article

• RDA Health Checks for SOA

  - by ShawnBailey

  What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

  Read the article

• OpenVPN not connecting

  - by LandArch

  There have been a number of post similar to this, but none seem to satisfy my need. Plus I am a Ubuntu newbie. I followed this tutorial to completely set up OpenVPN on Ubuntu 12.04 server. Here is my server.conf file ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) local 192.168.13.8 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? proto tcp ;proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "/etc/openvpn/ca.crt" cert "/etc/openvpn/server.crt" key "/etc/openvpn/server.key" # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. ;server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. server-bridge 192.168.13.101 255.255.255.0 192.168.13.105 192.168.13.200 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.13.1 255.255.255.0" push "dhcp-option DNS 192.168.13.201" push "dhcp-option DOMAIN blahblah.dyndns-wiki.com" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. user nobody group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I am using Windows 7 as the Client and set that up accordingly using the OpenVPN GUI. That conf file is as follows: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. blahblah.dyndns-wiki.com 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) user nobody group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\OpenVPN\config\\ca.crt" cert "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.crt" key "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Not sure whats left to do.

  Read the article

• Flash 10 (AS3): Pass Parameters to fscommand (from Projector)?

  - by yar

  Here is my shell script (fscommand/blah.sh): open -a /Applications/TextMate.app/ $1 and here is my ActionScript 3.0: flash.system.fscommand("exec", "blah.sh blah.txt"); this does not work. If I get rid of the $1 from the shell script and the blah.txt it works fine. How can I pass parameters to the shell script? (yes, the shell script works fine with the parameter when called from the command line). Note: This is on OSX but I need this to work on Windows as well. Edit: "Doesn't work" also means no trace, no error :)

  Read the article

• SSL in tomcat with apr and Centos 6

  - by Jonathan

  I'm facing a problem setting up my tomcat with apr native lib, I have the following: Tomcat: 7.0.42 Java: 1.7.0_40-b43 OS: Centos 6.4 (2.6.32-358.18.1.el6.i686) APR: 1.3.9 Native lib: 1.1.27 OpenSSL: openssl-1.0.0-27.el6_4.2.i686 My server.xml looks like: ... <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> ... <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" SSLCertificateFile="/tmp/monitoringPortalCert.pem" SSLCertificateKeyFile="/tmp/monitoringPortalKey.pem" SSLPassword="hide" /> ... I compiled the native lib as follow: ./configure --with-apr=/usr/bin/apr-1-config --with-ssl=yes --prefix=$CATALINA_HOME make && make install The APR is loaded ok: Oct 06, 2013 7:55:14 PM org.apache.catalina.core.AprLifecycleListener init INFO: Loaded APR based Apache Tomcat Native library 1.1.27 using APR version 1.3.9. But I'm still having this error: SEVERE: Failed to initialize the SSLEngine. org.apache.tomcat.jni.Error: 70023: This function has not been implemented on this platform ./configure outcome [root@localhost native]# ./configure --with-apr=/usr/bin/apr-1-config --with-ssl=yes -- prefix=$CATALINA_HOME && make && make install checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking for working mkdir -p... yes Tomcat Native Version: 1.1.27 checking for chosen layout... tcnative checking for APR... yes setting CC to "gcc" setting CPP to "gcc -E" checking for JDK location (please wait)... /usr/java/jdk1.7.0_40 from environment checking Java platform... checking Java platform... checking for sablevm... NONE adding "-I/usr/java/jdk1.7.0_40/include" to TCNATIVE_PRIV_INCLUDES checking os_type directory... linux adding "-I/usr/java/jdk1.7.0_40/include/linux" to TCNATIVE_PRIV_INCLUDES checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for OpenSSL library... using openssl from /usr/lib and /usr/include checking OpenSSL library version... ok checking for OpenSSL DSA support... yes setting TCNATIVE_LDFLAGS to "-lssl -lcrypto" adding "-DHAVE_OPENSSL" to CFLAGS setting TCNATIVE_LIBS to "" setting TCNATIVE_LIBS to " /usr/lib/libapr-1.la -lpthread" configure: creating ./config.status config.status: creating tcnative.pc config.status: creating Makefile config.status: executing default commands make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' /usr/lib/apr-1/build/mkdir.sh /usr/apache-tomcat-7.0.42/include/apr-1 /usr/apache- tomcat-7.0.42/lib/pkgconfig \ /usr/apache-tomcat-7.0.42/lib /usr/apache-tomcat-7.0.42/bin /usr/bin/install -c -m 644 tcnative.pc /usr/apache-tomcat-7.0.42/lib/pkgconfig/tcnative- 1.pc list=''; for i in $list; do \ ( cd $i ; make DESTDIR= install ); \ done /bin/sh /usr/lib/apr-1/build/libtool --mode=install /usr/bin/install -c -m 755 libtcnative-1.la /usr/apache-tomcat-7.0.42/lib libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.so.0.1.27 /usr/apache- tomcat-7.0.42/lib/libtcnative-1.so.0.1.27 libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so.0 || { rm -f libtcnative-1.so.0 && ln -s libtcnative- 1.so.0.1.27 libtcnative-1.so.0; }; }) libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so || { rm -f libtcnative-1.so && ln -s libtcnative-1.so.0.1.27 libtcnative-1.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.lai /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.la libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.a /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.a libtool: install: chmod 644 /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: ranlib /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: warning: remember to run `libtool --finish /usr/local/apr/lib' make && make install outcome: make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' /usr/lib/apr-1/build/mkdir.sh /usr/apache-tomcat-7.0.42/include/apr-1 /usr/apache- tomcat-7.0.42/lib/pkgconfig \ /usr/apache-tomcat-7.0.42/lib /usr/apache-tomcat-7.0.42/bin /usr/bin/install -c -m 644 tcnative.pc /usr/apache-tomcat-7.0.42/lib/pkgconfig/tcnative- 1.pc list=''; for i in $list; do \ ( cd $i ; make DESTDIR= install ); \ done /bin/sh /usr/lib/apr-1/build/libtool --mode=install /usr/bin/install -c -m 755 libtcnative-1.la /usr/apache-tomcat-7.0.42/lib libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.so.0.1.27 /usr/apache- tomcat-7.0.42/lib/libtcnative-1.so.0.1.27 libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so.0 || { rm -f libtcnative-1.so.0 && ln -s libtcnative- 1.so.0.1.27 libtcnative-1.so.0; }; }) libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so || { rm -f libtcnative-1.so && ln -s libtcnative-1.so.0.1.27 libtcnative-1.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.lai /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.la libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.a /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.a libtool: install: chmod 644 /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: ranlib /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: warning: remember to run `libtool --finish /usr/local/apr/lib' It seems everything is fine, but the error is not self-explanatory Could you guys help to understand where my error is? What am I missing? Thanks in advance for your support.

  Read the article

• SAXException: bad envelope tag

  - by David Guzman

  I'm trying to connect to a webservice https protected through a webservice client. Eclipse generated a stub based webservice client and looks nice to me. The problem comes when I try to call a method from the webservice: String a = (String)webservice.userProfileServices(xml); I'm also using the following SOAP headers: esgGatewayPort = (new EsgGatewayLocator()).getesgGatewayPort(); //setting the authentication header PrefixedQName name = new PrefixedQName("http://schemas.xmlsoap.org/ws/2002/07/secext","Security","wsse"); System.out.println("Setting headers for authentication"); org.apache.axis.message.SOAPHeaderElement sh = new org.apache.axis.message.SOAPHeaderElement(name); SOAPElement sub; try { String clntUserName="myUser"; String clntPassword="myPassword"; sub = sh.addChildElement("UsernameToken"); SOAPElement element = sub.addChildElement("Username"); element.addTextNode(clntUserName); element = sub.addChildElement("Password"); element.addTextNode(clntPassword); ((org.apache.axis.client.Stub) esgGatewayPort).setHeader(sh); } catch (SOAPException e) { e.printStackTrace(); } I receive the following: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: faultString: org.xml.sax.SAXException: Bad envelope tag: HTML faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:org.xml.sax.SAXException: Bad envelope tag: HTML at org.apache.axis.message.EnvelopeBuilder.startElement(EnvelopeBuilder.java:71) at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1048) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDriver.scanRootElementHook(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source) at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:133) at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:153) at javax.xml.parsers.SAXParser.parse(Unknown Source) at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227) at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696) at org.apache.axis.Message.getSOAPEnvelope(Message.java:435) at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:796) at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165) at org.apache.axis.client.Call.invokeEngine(Call.java:2784) at org.apache.axis.client.Call.invoke(Call.java:2767) at org.apache.axis.client.Call.invoke(Call.java:2443) at org.apache.axis.client.Call.invoke(Call.java:2366) at org.apache.axis.client.Call.invoke(Call.java:1812) Any help will be truly appreciated David

  Read the article

• Crontab no error but doesn't execute script

  - by crontabOnFreebsd

  I'm trying to execute a shell script from cron on Freebsd. To test wether crontab is working at all, i wrote the line * * * * * echo "Hello" /home/myuser/logile and it work fine. But when trying to execute any script it doesn't do anything, not even an error. (In the script i tried to run is just the same echo command) Below is the output of crontab -l: SHELL=/bin/sh PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin HOME=/home/myuser MAILTO=myuser * * * * * /home/myuser/shellscript.sh /home/myuser/logfile why is the script not getting executed, although crontab is obviously running? permission for all files are set to rwxr-xr-x

  Read the article

• Python's subprocess.Popen object hangs gathering child output when child process does not exit

  - by Daniel Miles

  When a process exits abnormally or not at all, I still want to be able to gather what output it may have generated up until that point. The obvious solution to this example code is to kill the child process with an os.kill, but in my real code, the child is hung waiting for NFS and does not respond to a SIGKILL. #!/usr/bin/python import subprocess import os import time import signal import sys child_script = """ #!/bin/bash i=0 while [ 1 ]; do echo "output line $i" i=$(expr $i \+ 1) sleep 1 done """ childFile = open("/tmp/childProc.sh", 'w') childFile.write(child_script) childFile.close() cmd = ["bash", "/tmp/childProc.sh"] finish = time.time() + 3 p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE) while p.poll() is None: time.sleep(0.05) if finish < time.time(): print "timed out and killed child, collecting what output exists so far" out, err = p.communicate() print "got it" sys.exit(0) In this case, the print statement about timing out appears and the python script never exits or progresses. Does anybody know how I can do this differently and still get output from my child processe

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >