Search Results

Search found 2403 results on 97 pages for 'snatch 02'.

Page 26/97 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• How do I get wireless and video working on a Sony Vaio vpc-z21x9r

  - by Alex

  OS: Ubuntu 11.10 Kernel: 2.6.37.6 Laptop: sony vaio vpc-z21x9r The problem: I can't change level of screen backlight; also can't enable wi-fi. While using 3.0 kernel everything is ok, but the laptop discharges too quickly. Results for lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 5f) VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) there is no wlan0 in ifconfig -a too. I've fount that kernel should already have drivers for this graphics controller, but when i load up in restore mode, it writes "fall" while trying to load up some video drivers. To change the level of backlight i've alrady tried: xbacklight -set XX , smartdimmer -s XX and got this init_ nvclock() failed! also sudo setpci -s 00:02.0 F4.B=XX with no results. As for wi-fi, i've found driver but i don't understand how to install it. Here it is How can I fix these problems? Thank you for your help and time! Also tried to fix problems with backlight writing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor Still no results. Is there any sense in recompiling kernel, I mean 2.6.37.6. Can it make any improvements in the situation?

  Read the article

• Need help installing the Intel VGA Driver [closed]

  - by Ary Catur Wicaksono

  Possible Duplicate: How do I install the Intel Graphics driver in my system? how to install intel VGA drive..?? I've been searching on google but did not see too I've been trying to ask the ubuntu forum in Indonesia. but they did not reply my post.. is there anything that can help me? *I am sorry my English is rather chaotic arthur@Chunx:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) arthur@Chunx:~$ sudo lshw -c display [sudo] password for arthur: *-display description: VGA compatible controller product: 82G33/G31 Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 10 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff arthur@Chunx:~$ sudo apt-get install xserver-xorg-video-intel Sedang membaca daftar paket... Selesai Membangun pohon ketergantungan Membaca informasi yang tersedia... Selesai xserver-xorg-video-intel telah berada dalam versi terbaru. 0 dimutakhirkan, 0 baru terinstal, 0 akan dihapus dan 190 tidak akan dimutakhirkan.

  Read the article

• Wifi - wireless network not working after installing Ubuntu 12.04

  - by Nilesh

  I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

  Read the article

• Trendnet tew-424ub wireless not working after update 12.10

  - by dwa

  I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• LIfebook lh531 inbuilt card reader not working

  - by chandrasekar

  Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

  Read the article

• How do I get 1366x768 resolution on 12.04?

  - by Megan

  I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

  Read the article

• Ubuntu 11.10 not starting in Graphical mode?

  - by iammilind

  I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• how to solve ArrayList outOfBoundsExeption?

  - by iQue

  Im getting: 09-02 17:15:39.140: E/AndroidRuntime(533): java.lang.IndexOutOfBoundsException: Invalid index 1, size is 1 09-02 17:15:39.140: E/AndroidRuntime(533): at java.util.ArrayList.throwIndexOutOfBoundsException(ArrayList.java:251) when Im killing enemies using this method: private void checkCollision() { Rect h1 = happy.getBounds(); for (int i = 0; i < enemies.size(); i++) { for (int j = 0; j < bullets.size(); j++) { Rect b1 = bullets.get(j).getBounds(); Rect e1 = enemies.get(i).getBounds(); if (b1.intersect(e1)) { enemies.get(i).damageHP(5); bullets.remove(j); Log.d("TAG", "HERE: LOLTHEYTOUCHED"); } if (h1.intersect(e1)){ happy.damageHP(5); } if(enemies.get(i).getHP() <= 0){ enemies.remove(i); } if(happy.getHP() <= 0){ //end-screen !!!!!!! } } } } using this ArrayList: private ArrayList<Enemy> enemies = new ArrayList<Enemy>(); and adding to array like this: public void createEnemies() { Bitmap bmp = BitmapFactory.decodeResource(getResources(), R.drawable.female); if (enemyCounter < 24) { enemies.add(new Enemy(bmp, this, controls)); } enemyCounter++; } I dont really understand what the problem is, Ive been looking around for a while but cant really find anything that helps me. If you know or if you can link me someplace where they have a solution for a similar problem Ill be a very happy camper! Thanks for ur time.

  Read the article

• WordPress mod_rewrite redirect specific folders

  - by Ps Cjef

  As a new user, I'm not allowed to post more than two hyperlinks here. So I have added a space after every http (ignore them and read as full URLs). System: Debian Etch, Apache 2.2 I have a WordPress instance with multiple blogs. I would like to redirect some of the folders based on the year and month, while leaving other folders go to the actual locations. Example: I have archives for a few years, like 2010, 2011 and 2012: http ://mydomain.com/wordpress/myblog/2010/02 http ://mydomain.com/wordpress/myblog/2011/01 http ://mydomain.com/wordpress/myblog/2012/01 I would like to redirect all 2010 and 2011 posts to another blog with the same folder structure: http ://mydomain.com/wordpress/myotherblog/2010/02 http ://mydomain.com/wordpress/myotherblog/2011/01 and so on. I would like to have 2012 and beyond to go to the actual site (http ://mydomain.com/wordpress/myblog/2012/01). I tried mod_rewrite with the following, one rule at a time to test redirection for just one year (and to expand later for other years), and none of them worked! * RewriteEngine is already on since there are some default WordPress rewrites. * RewriteBase is set to http://mydomain.com/wordpress/ . * I put my rule before all the other default WordPress rules are processed. Didn't work solution #1 RedirectMatch 301 /myblog/2010/(.*) /myotherblog/2010/$1 Didn't work solution #2 RewriteRule /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 [R=301] Didn't work solution #3 RedirectPermanent /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 I've also tried the above rules with and without a fully qualified URL for the new location. The rewrite log, with log level set to 9, did not provide any useful information. It shows that it looks at the pattern specified against the URL (as mentioned in the rule), but finally what happens is a passthrough to http ://mydomain.com/myblog/ for all URLs or a 500 Internal Server Error. Any ideas on where I could be going wrong or any alternative solutions?

  Read the article

• Can't get Unity 3D to work in 11.10

  - by pmoseph

  I recently upgraded to 11.10 on my Lenovo ThinkPad T520, and I'm not able to load Unity 3D (I'm not selecting 2D at login menu either). me@mycomp:~$ echo $DESKTOP_SESSION ubuntu-2d I ran the unity support test below as well. me@mycomp:~$ /usr/lib/nux/unity_support_test -p Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: unable to create the OpenGL context And it looks like I only have one graphics card: me@mycomp:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Also, Ubuntu lists nothing under the "Additional Drivers" window. Any help would be extremely appreciated as I'm somewhat of a noob. Thanks! Edit 1: Here is the output of lshw -C display me@mycomp:~$ sudo lshw -C display *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64)

  Read the article

• Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

  - by user100987

  When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

  Read the article

• Screen flickering / scrambling on an Asus UL30A

  - by user55059

  Recently my Laptop screen started to flicker. You can view the phenomena here: YouTube Sometimes the screen is totally scrambled, but most of the time it starts with the Title bar only. It happens inconsistently. My Laptop is Asus UL30A and I'm using Ubuntu 11.10. Output from command: sudo lshw -C display; lsb_release -a; uname -a; xrandr *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:dc00(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fe800000-fe8fffff LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric Linux steelke 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) I already rolled back the kernel to 3.0.0-14 instead of 3.0.0-17 as mentioned in this post, but without result. I guess the problem is related to the driver, because I don't see similar behaviour in the BIOS Setup. Any tips or help is welcome.

  Read the article

• Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

  - by Coen

  After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

  Read the article

• Battery Life in ubuntu 14.04

  - by user287466

  Today i had fresh installation of ubuntu 14.04 previously i had ubuntu 12.04 and had 5 to 6 hours of battery backup even at constant work, but in 14.04 getting 3 hrs only, tried with tlp but no use. lspci: 0:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

  Read the article

• How do I use LibreOffice's 3d transitions in Impress?

  - by Lvkz

  How can I get the 3D transitions working on Impress? I got a presentation coming soon, and as a requirement of the course the professor want us to use transitions on our "Power Point" chapter, obviously I have been using LibreOffice in every exercise but the native transitions are kind of lame, so when I install the newer version of Ubuntu, always install the extra package to the transitions - I had installed the 3D package: libreoffice-ogltrans 1:3.4.3-3ubuntu2 In previous versions of Ubuntu and worked perfectly, but for some reason is not working in this release. I got LibreOffice 3.4.3, Ubuntu Oneiric Ocelot (11.10) and my hardware is not relevant because I had it working before on previous releases. I know is not critical, but for my class is a pretty important deal, and can be a perfect opportunity to show the class that the cool stuff are not only in Windows. As a recomendation of one of Eliah Kagan, I'm putting the output of: sudo lshw -C video *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f6c00000-f6ffffff memory:e0000000-efffffff ioport:efe8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6b00000-f6bfffff And I'm not using Unity - it don't there anyways -, I'm using instead Gnome Shell.

  Read the article

• ubuntu precise high hard drive I/O

  - by pavolzetor

  on ubuntu precise, all apps starts slowly, and my hard drive is all time in use. What is the cause? it was never before, even nautilus takes a lot time to load, boot is also slower. top - 18:37:05 up 1:07, 1 user, load average: 2.03, 2.34, 2.25 Tasks: 182 total, 1 running, 180 sleeping, 0 stopped, 1 zombie Cpu(s): 30.2%us, 7.2%sy, 1.4%ni, 53.9%id, 7.1%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 3941576k total, 3522048k used, 419528k free, 50156k buffers Swap: 0k total, 0k used, 0k free, 1827640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 pk 20 0 1018m 189m 28m S 4 4.9 22:28.04 plugin-containe 1290 root 20 0 82336 16m 1492 S 2 0.4 0:04.41 landscape-clien 1305 root 20 0 97280 22m 5584 S 2 0.6 0:01.57 landscape-manag 4201 pk 20 0 17328 1312 924 R 2 0.0 0:00.02 top 1 root 20 0 24436 2364 1268 S 0 0.1 0:00.68 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.02 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.43 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset

  Read the article

• About output of vga_switcher

  - by zhangjie

  When IGD and DIS both exist in my pc,and I want to disable DIS,so I create a service to switch on and off the DIS.It works.Finally,I decide to add the service command into /etc/rc.local so that DIS will be powered off automatically.Unfortunately,it fails.There's only one command added by myself in the file /etc/rc.local,so I can affirm failure is caused by that added command. Before,I directly added the command "echo OFF /sys/kernel/debug..." into /etc/rc.local,and when I restarted,the system startup fails.So I thought maybe when the command is executed,the DIS hasn't been powered on or ready for work.So conflict occurs!It's just my prediction.Then I added one line command "sleep 1s" before the "echo OFF ...",it works nearly everytime when I start or restart pc,while fails sometimes. The output result of "cat /sys/kernel/debug..." is as following: 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 I want know 0000:00:02.0 means what?Time of first power on? If it was really time,I can set the command "sleep 2s" to wait for DIS powered on then "echo OFF ..." Thanks for your advice!

  Read the article

• PE Header Requirements

  - by Pindatjuh

  What are the requirements of a PE file (PE/COFF)? What fields should be set, which value, at a bare minimum for enabling it to "run" on Windows (i.e. executing "ret" instruction and then close, without error). The library I am building first is the linker: Now, the problem I have is the PE file (PE/COFF). I don't know what is "required" for a PE file before it can actually execute on my platform. My testing platform is Vista. I get an error message, saying "This is not a valid Win32 executable." when I execute it by double-clicking, and I get an "Access Denied." when executing it with CLI cmd. I have two sections, .text and .data. I've implemented the PE headers as provided by several online documents, i.e. MSDN and some other thirdparty documentation. If I use a hex-editor, it looks almost like a regular PE file. I don't use any imports, nor IAT, nor any directories in the PE header. Edit: I've added an import table, still not a valid .exe-file, says my Windows. I've tried to use values which are also mentioned at the smallest PE-file guide. No luck. Really the only thing I can't seem to figure out is what is required and what isn't. Some guides tell me everything is required, whilst others say about deprications: and it can be zero. I hope this is enough information. Thank you, in advance. Raw data (as requested) of current PE header: 4D 5A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 50 45 00 00 4C 01 02 00 C8 7A 55 4B 00 00 00 00 00 00 00 00 E0 00 82 01 0B 01 0D 25 00 10 00 00 00 10 00 00 00 00 00 00 00 10 00 00 00 10 00 00 00 20 00 00 00 00 40 00 00 10 00 00 00 02 00 00 01 00 0B 00 00 00 00 00 03 00 0A 00 00 00 00 00 00 22 00 00 38 01 00 00 00 00 00 00 03 00 00 00 00 40 00 00 00 40 00 00 00 40 00 00 00 40 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2E 74 65 78 74 00 00 00 00 00 00 00 00 10 00 00 00 02 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 60 2E 69 64 61 74 61 00 00 00 00 00 00 00 20 00 00 00 02 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3C 20 00 00 00 00 00 00 00 00 00 00 24 20 00 00 34 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4B 45 52 4E 45 4C 33 32 2E 64 6C 6C 00 00 00 00 01 00 00 80 00 00 00 00 01 00 00 80 00 00 00 00

  Read the article

• Upload Certificate and Key to RUEI in order to decrypt SSL traffic

  - by stefan.thieme(at)oracle.com

  So you want to monitor encrypted traffic with your RUEI collector ?Actually this is an easy thing if you follow the lines below...I will start out with creating a pair of snakeoil (so called self-signed) certificate and key with the make-ssl-cert tool which comes pre-packaged with apache only for the purpose of this example.$ sudo make-ssl-cert generate-default-snakeoil$ sudo ls -l /etc/ssl/certs/ssl-cert-snakeoil.pem /etc/ssl/private/ssl-cert-snakeoil.key-rw-r--r-- 1 root root     615 2010-06-07 10:03 /etc/ssl/certs/ssl-cert-snakeoil.pem-rw-r----- 1 root ssl-cert 891 2010-06-07 10:03 /etc/ssl/private/ssl-cert-snakeoil.keyRUEI Configuration of Security SSL Keys You will most likely get these two files from your Certificate Authority (CA) and/or your system administrators should be able to extract this from your WebServer or LoadBalancer handling SSL encryption for your infrastructure.Now let's look at the content of these two files, the certificate (apache assumes this is in PEM format) is called a public key and the private key is used by the apache server to encrypt traffic for a client using the certificate to initiate the SSL connection with the server.In case you already know that these two match, you simply have to paste them in one text file and upload this text file to your RUEI instance.$ sudo cat /etc/ssl/certs/ssl-cert-snakeoil.pem /etc/ssl/private/ssl-cert-snakeoil.key > /tmp/ruei.cert_and_key$ sudo cat /tmp/ruei.cert_and_key -----BEGIN CERTIFICATE----- MIIBmTCCAQICCQD7O3XXwVilWzANBgkqhkiG9w0BAQUFADARMQ8wDQYDVQQDEwZ1 YnVudHUwHhcNMTAwNjA3MDgwMzUzWhcNMjAwNjA0MDgwMzUzWjARMQ8wDQYDVQQD EwZ1YnVudHUwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALbs+JnI+p+K7Iqa SQZdnYBxOpdRH0/9jt1QKvmH68v81h9+f1Z2rVR7Zrd/l+ruE3H9VvuzxMlKuMH7 qBX/gmjDZTlj9WJM+zc0tSk+e2udy9he20lGzTxv0vaykJkuKcvSWNk4WE9NuAdg IHZvjKgoTSVmvM1ApMCg69nyOy97AgMBAAEwDQYJKoZIhvcNAQEFBQADgYEAk2rv VEkxR1qPSpJiudDuGUHtWKBKWiWbmSwI3REZT+0vG+YDG5a55NdxgRk3zhQntqF7 gNYjKxblBByBpY7W0ci00kf7kFgvXWMeU96NSQJdnid/YxzQYn0dGL2rSh1dwdPN NPQlNSfnEQ1yxFevR7aRdCqTbTXU3mxi8YaSscE= -----END CERTIFICATE----- -----BEGIN RSA PRIVATE KEY----- MIICXgIBAAKBgQC27PiZyPqfiuyKmkkGXZ2AcTqXUR9P/Y7dUCr5h+vL/NYffn9W dq1Ue2a3f5fq7hNx/Vb7s8TJSrjB+6gV/4Jow2U5Y/ViTPs3NLUpPntrncvYXttJ Rs08b9L2spCZLinL0ljZOFhPTbgHYCB2b4yoKE0lZrzNQKTAoOvZ8jsvewIDAQAB AoGBAJ7LCWeeUwnKNFqBYmD3RTFpmX4furnal3lBDX0945BZtJr0WZ/6N679zIYA aiVTdGfgjvDC9lHy3n3uctRd0Jqdh2QoSSxNBhq5elIApNIIYzu7w/XI/VhGcDlA b6uadURQEC2q+M8YYjw3mwR2omhCWlHIViOHe/9T8jfP/8pxAkEA7k39WRcQildH DFKcj7gurqlkElHysacMTFWf0ZDTEUS6bdkmNXwK6mH63BlmGLrYAP5AMgKgeDf8 D+WRfv8YKQJBAMSCQ7UGDN3ysyfIIrdc1RBEAk4BOrKHKtD5Ux0z5lcQkaCYrK8J DuSldreN2yOhS99/S4CRWmGkTj04wRSnjwMCQQCaR5mW3QzTU4/m1XEQxsBKSdZE 2hMSmsCmhuSyK13Kl0FPLr/C7qyuc4KSjksABa8kbXaoKfUz/6LLs+ePXZ2JAkAv +mIPk5+WnQgS4XFgdYDrzL8HTpOHPSs+BHG/goltnnT/0ebvgXWqa5+1pyPm6h29 PrYveM2pY1Va6z1xDowDAkEAttfzAwAHz+FUhWQCmOBpvBuW/KhYWKZTMpvxFMSY YD5PH6NNyLfBx0J4nGPN5n/f6il0s9pzt3ko++/eUtWSnQ== -----END RSA PRIVATE KEY----- Simply click on the add new key and browse for the cert_and_key file on your desktop which you concatenated earlier using any text editor. You may need to add a passphrase in order to decrypt the RSA key in some cases (it should tell you BEGIN ENCRYPTED PRIVATE KEY in the header line). I will show you the success screen after uploading the certificate to RUEI. You may want to restart your collector once you have uploaded all the certificate/key pairs you want to use in order to make sure they get picked up asap.You should be able to see the number of SSL Connections rising in the Collector statistics screen below. The figures for decrypt errors should slowly go down and the usage figures for your encryption algortihm on the subsequent SSL Encryption screen should go up. You should be 100% sure everything works fine by now, otherwise see below to distinguish the remaining 1% from your 99% certainty.Verify Certificate and Key are matchingYou can compare the modulus of private key and public certificate and they should match in order for the key to fit the lock. You only want to make sure they both fit each other.We are actually interested only in the following details of the two files, which can be determined by using the -subject, -dates and -modulus command line switches instead of the complete -text output of the x509 certificate/rsa key contents.$ sudo openssl x509 -noout -subject -in /etc/ssl/certs/ssl-cert-snakeoil.pemsubject= /CN=ubuntu$ sudo openssl x509 -noout -dates -in /etc/ssl/certs/ssl-cert-snakeoil.pemnotBefore=Jun  7 08:03:53 2010 GMTnotAfter=Jun  4 08:03:53 2020 GMT$ sudo openssl x509 -noout -modulus -in /etc/ssl/certs/ssl-cert-snakeoil.pem Modulus=B6ECF899C8FA9F8AEC8A9A49065D9D80713A97511F4FFD8EDD502AF987EBCBFCD61F7E7F5676AD547B66B77F97EAEE1371FD56FBB3C4C94AB8C1FBA815FF8268C3653963F5624CFB3734B5293E7B6B9DCBD85EDB4946CD3C6FD2F6B290992E29CBD258D938584F4DB8076020766F8CA8284D2566BCCD40A4C0A0EBD9F23B2F7B $ sudo openssl rsa -noout -modulus -in /etc/ssl/private/ssl-cert-snakeoil.keyModulus=B6ECF899C8FA9F8AEC8A9A49065D9D80713A97511F4FFD8EDD502AF987EBCBFCD61F7E7F5676AD547B66B77F97EAEE1371FD56FBB3C4C94AB8C1FBA815FF8268C3653963F5624CFB3734B5293E7B6B9DCBD85EDB4946CD3C6FD2F6B290992E29CBD258D938584F4DB8076020766F8CA8284D2566BCCD40A4C0A0EBD9F23B2F7BAs you can see the modulus matches exactly and we have the proof that the certificate has been created using the private key. OpenSSL Certificate and Key DetailsAs I already told you, you do not need all the greedy details, but in case you want to know it in depth what is actually in those hex-blocks can be made visible with the following commands which show you the actual content in a human readable format.Note: You may not want to post all the details of your private key =^) I told you I have been using a self-signed certificate only for showing you these details.$ sudo openssl rsa -noout -text -in /etc/ssl/private/ssl-cert-snakeoil.keyPrivate-Key: (1024 bit)modulus:    00:b6:ec:f8:99:c8:fa:9f:8a:ec:8a:9a:49:06:5d:    9d:80:71:3a:97:51:1f:4f:fd:8e:dd:50:2a:f9:87:    eb:cb:fc:d6:1f:7e:7f:56:76:ad:54:7b:66:b7:7f:    97:ea:ee:13:71:fd:56:fb:b3:c4:c9:4a:b8:c1:fb:    a8:15:ff:82:68:c3:65:39:63:f5:62:4c:fb:37:34:    b5:29:3e:7b:6b:9d:cb:d8:5e:db:49:46:cd:3c:6f:    d2:f6:b2:90:99:2e:29:cb:d2:58:d9:38:58:4f:4d:    b8:07:60:20:76:6f:8c:a8:28:4d:25:66:bc:cd:40:    a4:c0:a0:eb:d9:f2:3b:2f:7bpublicExponent: 65537 (0x10001)privateExponent:    00:9e:cb:09:67:9e:53:09:ca:34:5a:81:62:60:f7:    45:31:69:99:7e:1f:ba:b9:da:97:79:41:0d:7d:3d:    e3:90:59:b4:9a:f4:59:9f:fa:37:ae:fd:cc:86:00:    6a:25:53:74:67:e0:8e:f0:c2:f6:51:f2:de:7d:ee:    72:d4:5d:d0:9a:9d:87:64:28:49:2c:4d:06:1a:b9:    7a:52:00:a4:d2:08:63:3b:bb:c3:f5:c8:fd:58:46:    70:39:40:6f:ab:9a:75:44:50:10:2d:aa:f8:cf:18:    62:3c:37:9b:04:76:a2:68:42:5a:51:c8:56:23:87:    7b:ff:53:f2:37:cf:ff:ca:71prime1:    00:ee:4d:fd:59:17:10:8a:57:47:0c:52:9c:8f:b8:    2e:ae:a9:64:12:51:f2:b1:a7:0c:4c:55:9f:d1:90:    d3:11:44:ba:6d:d9:26:35:7c:0a:ea:61:fa:dc:19:    66:18:ba:d8:00:fe:40:32:02:a0:78:37:fc:0f:e5:    91:7e:ff:18:29prime2:    00:c4:82:43:b5:06:0c:dd:f2:b3:27:c8:22:b7:5c:    d5:10:44:02:4e:01:3a:b2:87:2a:d0:f9:53:1d:33:    e6:57:10:91:a0:98:ac:af:09:0e:e4:a5:76:b7:8d:    db:23:a1:4b:df:7f:4b:80:91:5a:61:a4:4e:3d:38:    c1:14:a7:8f:03exponent1:    00:9a:47:99:96:dd:0c:d3:53:8f:e6:d5:71:10:c6:    c0:4a:49:d6:44:da:13:12:9a:c0:a6:86:e4:b2:2b:    5d:ca:97:41:4f:2e:bf:c2:ee:ac:ae:73:82:92:8e:    4b:00:05:af:24:6d:76:a8:29:f5:33:ff:a2:cb:b3:    e7:8f:5d:9d:89exponent2:    2f:fa:62:0f:93:9f:96:9d:08:12:e1:71:60:75:80:    eb:cc:bf:07:4e:93:87:3d:2b:3e:04:71:bf:82:89:    6d:9e:74:ff:d1:e6:ef:81:75:aa:6b:9f:b5:a7:23:    e6:ea:1d:bd:3e:b6:2f:78:cd:a9:63:55:5a:eb:3d:    71:0e:8c:03coefficient:    00:b6:d7:f3:03:00:07:cf:e1:54:85:64:02:98:e0:    69:bc:1b:96:fc:a8:58:58:a6:53:32:9b:f1:14:c4:    98:60:3e:4f:1f:a3:4d:c8:b7:c1:c7:42:78:9c:63:    cd:e6:7f:df:ea:29:74:b3:da:73:b7:79:28:fb:ef:    de:52:d5:92:9d$ sudo openssl x509 -noout -text -in /etc/ssl/certs/ssl-cert-snakeoil.pemCertificate:    Data:        Version: 1 (0x0)        Serial Number:            fb:3b:75:d7:c1:58:a5:5b        Signature Algorithm: sha1WithRSAEncryption        Issuer: CN=ubuntu        Validity            Not Before: Jun  7 08:03:53 2010 GMT            Not After : Jun  4 08:03:53 2020 GMT        Subject: CN=ubuntu        Subject Public Key Info:            Public Key Algorithm: rsaEncryption            RSA Public Key: (1024 bit)                Modulus (1024 bit):                    00:b6:ec:f8:99:c8:fa:9f:8a:ec:8a:9a:49:06:5d:                    9d:80:71:3a:97:51:1f:4f:fd:8e:dd:50:2a:f9:87:                    eb:cb:fc:d6:1f:7e:7f:56:76:ad:54:7b:66:b7:7f:                    97:ea:ee:13:71:fd:56:fb:b3:c4:c9:4a:b8:c1:fb:                    a8:15:ff:82:68:c3:65:39:63:f5:62:4c:fb:37:34:                    b5:29:3e:7b:6b:9d:cb:d8:5e:db:49:46:cd:3c:6f:                    d2:f6:b2:90:99:2e:29:cb:d2:58:d9:38:58:4f:4d:                    b8:07:60:20:76:6f:8c:a8:28:4d:25:66:bc:cd:40:                    a4:c0:a0:eb:d9:f2:3b:2f:7b                Exponent: 65537 (0x10001)    Signature Algorithm: sha1WithRSAEncryption        93:6a:ef:54:49:31:47:5a:8f:4a:92:62:b9:d0:ee:19:41:ed:        58:a0:4a:5a:25:9b:99:2c:08:dd:11:19:4f:ed:2f:1b:e6:03:        1b:96:b9:e4:d7:71:81:19:37:ce:14:27:b6:a1:7b:80:d6:23:        2b:16:e5:04:1c:81:a5:8e:d6:d1:c8:b4:d2:47:fb:90:58:2f:        5d:63:1e:53:de:8d:49:02:5d:9e:27:7f:63:1c:d0:62:7d:1d:        18:bd:ab:4a:1d:5d:c1:d3:cd:34:f4:25:35:27:e7:11:0d:72:        c4:57:af:47:b6:91:74:2a:93:6d:35:d4:de:6c:62:f1:86:92:        b1:c1The above output can also be seen if you direct your browser client to your website and check the certificate sent by the server to your browser. You will be able to lookup all the details including the validity dates, subject common name and the public key modulus.Capture an SSL connection using WiresharkAnd as you would have expected, looking at the low-level tcp data that has been exchanged between the client and server with a tcp-diagnostics tool (i.e. wireshark/tcpdump) you can also see the modulus in there.These were the settings I used to capture all traffic on the local loopback interface, matching the filter expression: tcp and ip and host 127.0.0.1 and port 443. This tells Wireshark to leave out any other information, I may not have been interested in showing you.

  Read the article

• How to find and fix issue with Pound and HAProxy

  - by javano

  Pound sits in front of HAProxy (on the same box) to perform SSL off-load. Requests are passed to 127.0.0.1:80 where HAProxy then balances the requests across backend servers for a hosted ASP .NET web app. A user is getting HTTP error 500 (Internal Server Error) returned to their browser this morning and I can see it is comming from Pound. They see no log entry in their web app (IIS) server logs, so its not hitting the back end servers. I think the problem is possibly with HAProxy. Lets review the logs: Initialy the users (1.2.3.4) hits Pound on the load balancer: Nov 12 10:02:24 lb1 pound: a-website.com 1.2.3.4 - - [12/Nov/2012:10:02:23 +0000] "POST /eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d HTTP/1.1" 200 155721 "https://a-website.com/eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d" "Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.96 Safari/537.4" Nov 12 10:02:24 lb1 pound: a-website.com 1.2.3.4 - - [12/Nov/2012:10:02:24 +0000] "GET /Controls/ReferringOrganisationLogoImageHandler.ashx HTTP/1.1" 200 142 "https://a-website.com/eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d" "Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.96 Safari/537.4" Nov 12 10:02:24 lb1 pound: a-website.com 1.2.3.4 - - [12/Nov/2012:10:02:24 +0000] "GET /eventmanagement/WebCoreModule.ashx?__ac=1&__ac_wcmid=RAWCIL&__ac_lib=Radactive.WebControls.ILoad&__ac_key=RAWVCO_11&__ac_sid=fnoz2hmvirfivb2btbubbw45&__ac_cn=&__ac_cp=BVDXDWFLDWFMHDFJBOEGBDFLFOD5EEFD&__ac_fr=634883113445054092&__ac_ssid= HTTP/1.1" 200 11206 "https://a-website.com/eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d" "Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.96 Safari/537.4" Nov 12 10:02:24 lb1 pound: a-website.com 1.2.3.4 - - [12/Nov/2012:10:02:24 +0000] "GET /eventmanagement/WebCoreModule.ashx?__ac=1&__ac_wcmid=RAWCIL&__ac_lib=Radactive.WebControls.ILoad&__ac_key=RAWCCIL_11&__ac_sid=fnoz2hmvirfivb2btbubbw45&__ac_cn=&__ac_cp=BVDXDWFLDWFMHDFJBOEGBDFLFOD5EEFD&__ac_fr=634883113445054092 HTTP/1.1" 200 43496 "https://a-website.com/eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d" "Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.96 Safari/537.4" Nov 12 10:02:42 lb1 pound: (7f819fff8700) e500 for 1.2.3.4 response error read from 127.0.0.1:80/POST /eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d HTTP/1.1: Connection timed out (15.121 secs) Above we can see the request comming in from the user at IP address 1.2.3.4, eventually Pound returns error 500 with the message "Connection timed out (15.121 secs)". Running HAProxy in debug mode, we can see the request come in; user@box:/var/log$ sudo /etc/init.d/haproxy restart Restarting haproxy: haproxy[WARNING] 316/100042 (19218) : <debug> mode incompatible with <quiet> and <daemon>. Keeping <debug> only. Available polling systems : sepoll : pref=400, test result OK epoll : pref=300, test result OK poll : pref=200, test result OK select : pref=150, test result OK Total: 4 (4 usable), will use sepoll. Using sepoll() as the polling mechanism. ....... 00000008:iis-servers.srvrep[0008:0009]: HTTP/1.1 200 OK 00000008:iis-servers.srvhdr[0008:0009]: Cache-Control: private 00000008:iis-servers.srvhdr[0008:0009]: Pragma: no-cache 00000008:iis-servers.srvhdr[0008:0009]: Content-Length: 22211 00000008:iis-servers.srvhdr[0008:0009]: Content-Type: text/plain; charset=utf-8 00000008:iis-servers.srvhdr[0008:0009]: Server: Microsoft-IIS/7.0 00000008:iis-servers.srvhdr[0008:0009]: X-AspNet-Version: 2.0.50727 00000008:iis-servers.srvhdr[0008:0009]: X-Powered-By: ASP.NET 00000008:iis-servers.srvhdr[0008:0009]: Date: Mon, 12 Nov 2012 10:01:25 GMT 00000009:iis-servers.accept(0004)=000a from [127.0.0.1:53556] 00000009:iis-servers.clireq[000a:ffff]: GET /Logoff.aspx HTTP/1.1 00000009:iis-servers.clihdr[000a:ffff]: Host: a-website.com 00000009:iis-servers.clihdr[000a:ffff]: Connection: keep-alive 00000009:iis-servers.clihdr[000a:ffff]: User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.96 Safari/537.4 00000009:iis-servers.clihdr[000a:ffff]: Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 00000009:iis-servers.clihdr[000a:ffff]: Referer: https://a-website.com/eventmanagement/eventmanagement.aspx 00000009:iis-servers.clihdr[000a:ffff]: Accept-Encoding: gzip,deflate,sdch 00000009:iis-servers.clihdr[000a:ffff]: Accept-Language: en-GB,en;q=0.8,it;q=0.6 00000009:iis-servers.clihdr[000a:ffff]: Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 00000009:iis-servers.clihdr[000a:ffff]: Cookie: ASP.NET_SessionId=fnoz2hmvirfivb2btbubbw45; apps=apps2; AuthHint=true; __utma=190546871.552451749.1340295610.1352454675.1352711624.159; __utmb=190546871.2.10.1352711624; __utmc=190546871; __utmz=190546871.1349966519.143.3.utmcsr=en.wikipedia.org|utmccn=(referral)|utmcmd=referral|utmcct=/wiki/Single_transferable_vote; Sequence=162; SessionId=80e603f9-7e73-474b-8b7c-e198b2f11218; SecureSessionId=00000000-0000-0000-0000-000000000000; __utma=58336506.1016936529.1332752550.1352454680.1352711626.456; __utmb=58336506.28.10.1352711626; __utmc=58336506; __utmz=58336506.1352711626.456.155.utmcsr=a-website.com|utmccn=(referral)|utmcmd=referral|utmcct=/ 00000009:iis-servers.clihdr[000a:ffff]: X-SSL-cipher: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 00000009:iis-servers.clihdr[000a:ffff]: X-Forwarded-For: 1.2.3.4 00000008:iis-servers.srvcls[0008:0009] 00000008:iis-servers.clicls[0008:0009] 00000008:iis-servers.closed[0008:0009] ....... 0000000e:iis-servers.srvrep[0008:0009]: HTTP/1.1 200 OK 0000000e:iis-servers.srvhdr[0008:0009]: Cache-Control: no-cache 0000000e:iis-servers.srvhdr[0008:0009]: Pragma: no-cache 0000000e:iis-servers.srvhdr[0008:0009]: Content-Length: 12805 0000000e:iis-servers.srvhdr[0008:0009]: Content-Type: text/html; charset=utf-8 0000000e:iis-servers.srvhdr[0008:0009]: Server: Microsoft-IIS/7.0 0000000e:iis-servers.srvhdr[0008:0009]: X-AspNet-Version: 2.0.50727 0000000e:iis-servers.srvhdr[0008:0009]: X-Powered-By: ASP.NET 0000000e:iis-servers.srvhdr[0008:0009]: Date: Mon, 12 Nov 2012 10:02:22 GMT 0000000f:iis-servers.accept(0004)=000c from [127.0.0.1:53609] 0000000f:iis-servers.clireq[000c:ffff]: GET /Controls/ReferringOrganisationLogoImageHandler.ashx HTTP/1.1 0000000f:iis-servers.clihdr[000c:ffff]: Host: a-website.com 0000000f:iis-servers.clihdr[000c:ffff]: Connection: keep-alive 0000000f:iis-servers.clihdr[000c:ffff]: User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.96 Safari/537.4 0000000f:iis-servers.clihdr[000c:ffff]: Accept: */* 0000000f:iis-servers.clihdr[000c:ffff]: Referer: https://a-website.com/eventmanagement/EditEvent.aspx?eventOid=623fc423-2329-4cab-8be5-72a97709570d 0000000f:iis-servers.clihdr[000c:ffff]: Accept-Encoding: gzip,deflate,sdch 0000000f:iis-servers.clihdr[000c:ffff]: Accept-Language: en-GB,en;q=0.8,it;q=0.6 0000000f:iis-servers.clihdr[000c:ffff]: Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 0000000f:iis-servers.clihdr[000c:ffff]: Cookie: ASP.NET_SessionId=fnoz2hmvirfivb2btbubbw45; apps=apps2; __utma=190546871.552451749.1340295610.1352454675.1352711624.159; __utmb=190546871.2.10.1352711624; __utmc=190546871; __utmz=190546871.1349966519.143.3.utmcsr=en.wikipedia.org|utmccn=(referral)|utmcmd=referral|utmcct=/wiki/Single_transferable_vote; AuthHint=true; __utma=58336506.1016936529.1332752550.1352454680.1352711626.456; __utmb=58336506.33.10.1352711626; __utmc=58336506; __utmz=58336506.1352711626.456.155.utmcsr=a-website.com|utmccn=(referral)|utmcmd=referral|utmcct=/; SessionId=69cd415c-2f4e-4ace-b8f7-926d054f87c2; SecureSessionId=00000000-0000-0000-0000-000000000000; Sequence=170 0000000f:iis-servers.clihdr[000c:ffff]: X-SSL-cipher: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 0000000f:iis-servers.clihdr[000c:ffff]: X-Forwarded-For: 1.2.3.4 0000000f:iis-servers.srvrep[000c:000d]: HTTP/1.1 200 OK 0000000f:iis-servers.srvhdr[000c:000d]: Cache-Control: private 0000000f:iis-servers.srvhdr[000c:000d]: Content-Length: 142 0000000f:iis-servers.srvhdr[000c:000d]: Content-Type: image/png 0000000f:iis-servers.srvhdr[000c:000d]: Server: Microsoft-IIS/7.0 0000000f:iis-servers.srvhdr[000c:000d]: X-AspNet-Version: 2.0.50727 0000000f:iis-servers.srvhdr[000c:000d]: Set-Cookie: SessionId=69cd415c-2f4e-4ace-b8f7-926d054f87c2; path=/ 0000000f:iis-servers.srvhdr[000c:000d]: Set-Cookie: SecureSessionId=00000000-0000-0000-0000-000000000000; path=/; secure 0000000f:iis-servers.srvhdr[000c:000d]: X-Powered-By: ASP.NET 0000000f:iis-servers.srvhdr[000c:000d]: Date: Mon, 12 Nov 2012 10:02:25 GMT 0000000e:iis-servers.srvcls[0008:0009] 0000000e:iis-servers.clicls[0008:0009] 0000000e:iis-servers.closed[0008:0009] 0000000f:iis-servers.srvcls[000c:000d] 0000000f:iis-servers.clicls[000c:000d] 0000000f:iis-servers.closed[000c:000d] 00000009:iis-servers.srvcls[000a:000b] 00000009:iis-servers.clicls[000a:000b] 00000009:iis-servers.closed[000a:000b] Where in the chain is the issue here?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >