Search Results

Search found 1211 results on 49 pages for 'subversion'.

Page 26/49 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Windows service running under network credentials doesn't autostart

    - by David Alpert
    I have a Subversion Server running as a resident service on a Windows XP Pro machine. That service needs to access a secure network fileshare, so I used the Services-Properties-Log On tab to tell the service to run as a user who has access to the target fileshare. That works out fine until the machine restarts, when the service fails to autostart. I am able to start it manually by logging in, going back to that Services-Properties-Log On tab and reconfiming the explicit credentials. Do I have to manually start this service under alternate credentials every time the machine reboots? Is there something else I can do to make sure that my Subversion server service autostarts with proper access to authenticate against this network share?

    Read the article

  • How Do I Restrict Repository Access via WebSVN?

    - by kaybenleroll
    I have multiple subversion repositories which are served up through Apache 2.2 and WebDAV. They are all located in a central place, and I used this debian-administration.org article as the basis (I dropped the use of the database authentication for a simple htpasswd file though). Since then, I have also started using WebSVN. My issue is that not all users on the system should be able to access the different repositories, and the default setup of WebSVN is to allow anyone who can authenticate. According to the WebSVN documentation, the best way around this is to use subversion's path access system, so I looked to create this, using the AuthzSVNAccessFile directive. When I do this though, I keep getting "403 Forbidden" messages. My files look like the following: I have default policy settings in a file: <Location /svn/> DAV svn SVNParentPath /var/lib/svn/repository Order deny,allow Deny from all </Location> Each repository gets a policy file like below: <Location /svn/sysadmin/> Include /var/lib/svn/conf/default_auth.conf AuthName "Repository for sysadmin" require user joebloggs jimsmith mickmurphy </Location> The default_auth.conf file contains this: SVNParentPath /var/lib/svn/repository AuthType basic AuthUserFile /var/lib/svn/conf/.dav_svn.passwd AuthzSVNAccessFile /var/lib/svn/conf/svnaccess.conf I am not fully sure why I need the second SVNParentPath in default_auth.conf, but I just added that today as I was getting error messages as a result of adding the AuthzSVNAccessFile directive. With a totally permissive access file [/] joebloggs = rw the system worked fine (and was essentially unchanged), but as I soon as I start trying to add any kind of restrictions such as [sysadmin:/] joebloggs = rw instead, I get the 'Permission denied' errors again. The log file entries are: [Thu May 28 10:40:17 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET websvn:/ [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET svn:/sysadmin What do I need to do to get this to work? Have configured apache wrong, or is my understanding of the svnaccess.conf file incorrect? If I am going about this the wrong way, I have no particular attachment to my overall approach, so feel free to offer alternatives as well. UPDATE (20090528-1600): I attempted to implement this answer, but I still cannot get it to work properly. I know most of the configuration is correct, as I have added [/] joebloggs = rw at the start and 'joebloggs' then has all the correct access. When I try to go repository-specific though, doing something like [/] joebloggs = rw [sysadmin:/] mickmurphy = rw then I got a permission denied error for mickmurphy (joebloggs still works), with an error similar to what I already had previously [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'mickmurphy' GET svn:/sysadmin Also, I forgot to explain previously that all my repositories are underneath /var/lib/svn/repository UPDATE (20090529-1245): Still no luck getting this to work, but all the signs seem to be pointing to the issue being with path-access control in subversion not working properly. My assumption is that I have not conf

    Read the article

  • Routing and Remote access rule not being applied internally (Windows SBS)

    - by Tim Saunders
    Hi, I have a Microsoft Small Business Server. I have pointed an external domain name to the external fixed IP address for the server. In routing and remote access I have defined a service for our subversion server as follows: Incoming port: 8443 Private address: 192.168.10.5 Outgoing port: 8443 192.168.10.5 is our development server, not the SBS (which is at 192.168.10.1) This rule works correctly if I am not on our internal network. However if I am on the internal network this rule does not get applied. What can I do/set so this rule is applied both internally and externally (so users with laptops et, don't keep having to change the URL by which they access the subversion server) Not sure what other info you may need, so please let me know if more details are required. T

    Read the article

  • Where to obtain openssl-devel for SunOS 5.10

    - by user35949
    So I am having an issue that I have seen other people have on many different systems. I have to build Subversion on a SunOS 5.10 box and have run into issues. I have the openssl source code installed and in the subversion-1.6.9 folder, I run the following: ./configure --with-ssl --with-libs=/opt/exp/lib/openssl/lib and receive the error: checking for library containing RSA_new... not found configure: error: could not find library containing RSA_new configure failed for neon I have also tried running the command without the "lib" on the end of the --with-libs path. I read online that I need the openssl-devel packages, but I have been unable to find them for SunOS 5.10, and they do not show up already installed on my system when running pkginfo. I have looked online including http://www.sunfreeware.com/ which I was told was a good SunOS software source. Any help you can provide would be welcomed. Thanks, Sean

    Read the article

  • Converting Mercurial Repository To Sub Version (SVN)

    - by alexganose
    This may seem like a very strange situation. Initially we were using subversion (SVN) for version control... then we moved to mercurial and used a tool to convert our previous commits to a mercurial form. And now we want to move back to sub version however we can't seem to find anything that will allow us to keep out history from the mercurial commits and keep them in subversion form. Does anyone know if this is possible/ how to go about doing it? Thanks!!

    Read the article

  • Applications not installing due to unmet dependencies

    - by Vineet Sharma
    I was running Apache on Linode. I recently shifted to Lighttpd and removed apache, now whenever I try to install any application I get the following error. ivineet:~# apt-get install subversion Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: libapache2-mod-php5: Depends: apache2-mpm-prefork (> 2.0.52) but it is not going to be installed or apache2-mpm-itk but it is not going to be installed subversion: Depends: libsvn1 (= 1.6.12dfsg-6) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). ivineet:~#

    Read the article

  • Running Debian as a Virtual Machine Host

    - by Tone
    I have a need to run a linux server to host subversion, bugzilla over Apache and also act as a file and print server. I also have a need to host Windows Server 2008 virtual machines for development purposes (I'm a .NET guy). The machine I have is a dual core AMD 2.5 Ghz w/2GB RAM. So here are my questions: 1) Should I run Debian (or some other distro) as the base AND create a Debian VM to host subversion, bugzilla and be my file/print server? or is it ok to use Debian as both my VM host and for those other reasons? 2) VMWare has a free server edition, Virtual Box also is another free option. Which one of these is better suited for what I need to do? Are there any other free (or inexpensive) alternatives out there? 3) Will I need a GUI with Debian in order to manage my VMs? 4) Can I run VMs without a GUI to conserve system resources?

    Read the article

  • SVN Checkout error on large repositories

    - by Brian Mitchell
    I wonder if anyone can help me. We have recently migrated our Subversion repository from a VisualSVN Server on Windows to a subversion server on CentOS. The migration was succesfull however we are getting the following error message Error REPORT of svn'/svn/MangoRepository/!svn/vcc/default': Could not read chunk size: Error connection was closed by server (http://servername) Now the workaround for this is simply to perform a update on the repo and it will contine where is left off. Im just wondering if anyone was a permanent fix for this as it can be quite frustrating to repeat my self to 60-70 developers.

    Read the article

  • Auth failed running command from shell script

    - by CSchulz
    I try to run following command from shell script: svn checkout http://url/ --username user --password password --non-interactive --no-auth-cache . It fails always with following error: svn: OPTIONS of 'http://url/': authorization failed: Could not authenticate to server: rejected Basic challenge (http://url) Here the call out of my script: $(svn $command $url $auth --non-interactive --no-auth-cache .) Running the same command from the terminal works fine. What is the difference between running from shell script and terminal? EDIT: Here some version information: OS: Porteus 1.0 based on Slackware 13.3 Subversion: subversion-1.6.16-i486-1

    Read the article

  • Unavailable repository

    - by katrina
    I am new to Ubuntu and keep butting up against errors, such as this: Package libpng12-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: libpng12-0 E: Unable to locate package subversion E: Package 'git-core' has no installation candidate E: Package 'build-essential' has no installation candidate E: Package 'autoconf' has no installation candidate E: Package 'libtool' has no installation candidate E: Unable to locate package libxml2-dev E: Unable to locate package libgeos-dev E: Unable to locate package libpq-dev E: Unable to locate package libbz2-dev E: Package 'proj' has no installation candidate E: Unable to locate package munin-node E: Unable to locate package munin E: Unable to locate package libprotobuf-c0-dev E: Unable to locate package protobuf-c-compiler E: Unable to locate package libfreetype6-dev E: Package 'libpng12-dev' has no installation candidate E: Unable to locate package libtiff4-dev E: Unable to locate package libicu-dev E: Unable to locate package libboost-all-dev E: Unable to locate package libgdal-dev E: Unable to locate package libcairo-dev E: Unable to locate package libcairomm-1.0-dev E: Couldn't find any package by regex 'libcairomm-1.0-dev' E: Unable to locate package apache2 E: Unable to locate package apache2-dev E: Unable to locate package libagg-dev when I want to do this: sudo apt-get install subversion git-core tar unzip wget bzip2 build-essential autoconf libtool libxml2-dev libgeos-dev libpq-dev libbz2-dev proj munin-node munin libprotobuf-c0-dev protobuf-c-compiler libfreetype6-dev libpng12-dev libtiff4-dev libicu-dev libboost-all-dev libgdal-dev libcairo-dev libcairomm-1.0-dev apache2 apache2-dev libagg-dev. Any help or advice would be greatly appreciated. Or referrals to other questions...

    Read the article

  • Distributed Development Tools -- (Version control and Project Management)

    - by Macy Abbey
    Hello, I've recently become responsible for choosing which source control and project management software to use for a company that employs me. Currently it uses Jira (project management) and Subversion (version control). I know there are many other options out there -- the ones I know about are all in this article http://mashable.com/2010/07/14/distributed-developer-teams/ . I'm leaning towards recommending they just stay with what they have as it seems workable and any change would have to be worth the cost of switching to say github/basecamp or some other solution. Some details on the team: It's a distributed development shop. Meetings of the whole team in one room are rare. It's currently a very small development team (three developers). The project management software is used by developers and a product manager or two. What are you experiences with version control and project management web applications? Are there any you would recommend and you think are worth the switching cost of time to learn new services / implementing the change? Edit: After educating myself further on the options it appears DVCS offer powerful benefits that may be worth investing in now as opposed to later in the company's lifetime when the switching cost is higher: I'm a Subversion geek, why I should consider or not consider Mercurial or Git or any other DVCS?

    Read the article

  • Why I love NUnit, NCover, CC Nant and friends

    - by gregarobinson
    I have used these opensource tools on past projects in different stages, but never all of them at once. I am on a project now where there is a build server, Subversion, Nant, NUnit with 100% NCover required coverage, CrusieControl, CCTray and Rhino Mockc.I was extending an Interface and concrete class in a solution I had never worked on before today. Automatic builds were turned off for the day for a special case QA test. I added my new members to the Interface, implemented them in the concrete class, did a local build, tested, all looked good, so I did a Subversion Update then Commit.  Around 4:30PM the automatic builds were turned back on. Right away the build failed for less than 100% code coverage on my last Commit. Turns out there was a project in the solution I modified that had numerous NUnit tests on the Interface/Concrete class I modified, 3 of which now failed. Now that is cool..of course i was frustrated as i wanted to go home..but..I did a bad thing..I did not run nant on the source prior to my Commit. Lesson learned, and a great lesson at that!   

    Read the article

  • It's raining development VirtualBox images again!

    - by pieter.humphrey
                                                The cloud has burst.. forecast is looking like large amounts of VirtualBox images are coming down from OTN.   Are you finding the install for Database, WebLogic, SOA or WebCenter to be complicated when your goal is simply to setup a development sandbox?  Sick of giving your credit card info to cloud vendors, only to be stuck in a walled garden where you can't connect to your own internal systems?   Are you new to Java and just wanted something technical to sink your teeth into?  Or maybe you just want to put some stuff on that new terabyte drive you got? ;) Have no fear.  VirtualBox 4.0 is here.  We've have several development (read: don't use in production) images that were designed for use for in-person events, but we're posting them for your enjoyment.  Some of the images have step by step hands on labs baked into them too!  So get a freeware download manager like BitComet, install VirtualBox, an MD5 checksum utility (if you are on windows) and get wet!   del.icio.us Tags: java,development,java ee,java fx,virtualBox,virtualization,database,soa,weblogic,jdeveloper,eclipse,netbeans,sql developer,times ten,zend,php,SOA,SOA Suite,BPM,BAM,B2B,hudson,maven,subversion,Eclipse,Solaris,OTN Technorati Tags: java,development,java ee,java fx,virtualBox,virtualization,database,soa,weblogic,jdeveloper,eclipse,netbeans,sql developer,times ten,zend,php,SOA,SOA Suite,BPM,BAM,B2B,hudson,maven,subversion,Eclipse,Solaris,OTN

    Read the article

  • Where to find Hg/Git technical support?

    - by Rook
    Posting this as a kind of a favour for a former coleague, so I don't know the exact circumstances, but I'll try to provide as much info as I can ... A friend from my old place of employment (maritime research institute; half government/commercial funding) has asked me if I could find out who provides technical support (commercial) for two major DVCS's of today - Git and Mercurial. They have been using VCS for years now (Subversion while I was there, don't know what they're using now - probably the same), and now they're renewing their software licences (they have to give a plan some time in advance for everything ... then it goes "through the system") and although they will be keeping Subversion as well, they would like to justify beginning of DVCS as an alternative system (most people root for Mercurial since it seems simpler; mostly engineers and physicians there who are not that interested in checking Git repos for corruption and the finer workings of Git, but I believe any one of the two could "pass") - but it has to have a price (can be zero; no problem there) and some sort of official technical support. It is a pro forma matter, but it has to be specified. Most of the people there are using one of the two already, but this has to be specified to be official. So, I'm asking you - do you know where could one go for Git or Mercurial technical support (can be commercial)? Technical forums and the like are out of the question. It has to work on the principle: - I have a problem. - I post a question with the details. - I get an answer in specified time. It can be "we cannot do that." but it has to be an official answer and given in agreed time. I'm sure by now most of you understand what I'm asking, but if not - post a comment or similar. Also, if you think of any reasons which could decide justification of introducing Git/Hg from an technical and administrative viewpoint, feel free to write them down also.

    Read the article

  • Version control for game development - issues and solutions?

    - by Cyclops
    There are a lot of Version Control systems available, including open-source ones such as Subversion, Git, and Mercurial, plus commercial ones such as Perforce. How well do they support the process of game-development? What are the issues using VCS, with regard to non-text files (binary files), large projects, etc? What are solutions to these problems, if any? For organization of Answers, let's try on a per-package basis. Update each package/Answer with your results. Also, please list some brief details in your answer, about whether your VCS is free or commercial, distributed versus centralized, etc. Update: Found a nice article comparing two of the VCS below - apparently, Git is MacGyver and Mercurial is Bond. Well, I'm glad that's settled... And the author has a nice quote at the end: It’s OK to proselytize to those who have not switched to a distributed VCS yet, but trying to convert a Git user to Mercurial (or vice-versa) is a waste of everyone’s time and energy. Especially since Git and Mercurial's real enemy is Subversion. Dang, it's a code-eat-code world out there in FOSS-land...

    Read the article

  • Linux distro for software development support?

    - by Xie Jilei
    I've spent too much time on setup & maintain a development server, which contains following tools: Common services like SSH, BIND, rsync, etc. Subversion, Git. Apache server, which runs CGit, Trac, Webmin, phpmyadmin, phppgadmin, etc. Jetty, which runs Archiva and Hudson. Bugzilla. PostgresSQL server, MySQL server. I've created a lot of Debian packages, like my-trac-utils, my-bugzilla-utils, my-bind9-utils, my-mysql-utils, etc. to make my life more convenient. However, I still feel I need a lot more utils. And I've spent a lot of time to maintain these packages, too. I think there maybe many developers doing the same things. As tools like subversion, git, trac are so common today. It's not to hard to install and configure each of them, but it took a long time to install them all. And it's time consuming to maintain them. Like backup the data, plot the usage graph and generate web reports. (gitstat for example) So, I'd like to hear if there exist any pre-configured distro for Development Server purpose, i.e., something like BackTrack for hackers?

    Read the article

  • Jenkins Paramerized Trigger + Copy Artifact

    - by Josh Kelley
    I'm working on setting up Jenkins to handle our release builds. A release build consists of a Windows installer that includes some binaries that must be built on Linux. Here's what I have so far: The Windows portion and Linux portion are set up as separate Jenkins projects. The Windows project is parameterized, taking the Subversion tag to build and release. As part of its build, the Windows project triggers a build of that same Subversion tag for the Linux project (using the Parameterized Trigger plugin) then copies the artifacts from the Linux project (using the Copy Artifact plugin) to the Windows project's workspace so that they can be included in the Windows installer. Where I'm stuck: Right now, Copy Artifact is set up to copy the last successful build. It seems more robust to configure Copy Artifact to copy from the exact build that Parameterized Trigger triggered, but I'm having trouble figuring out how to make that work. There's an option for a "build selector" parameter that I think is intended to help with this, but I can't figure out how it's supposed to be set up (and blindly experimenting with different possibilities is somewhat painful when the build takes an hour or two to find success or failure). How should I set this up? How does build selector work?

    Read the article

  • Distributed Development Tools -- (Version control and Project Management)

    - by Macy Abbey
    I've recently become responsible for choosing which source control and project management software to use for a company that employs me. Currently it uses Jira (project management) and Subversion (version control). I know there are many other options out there -- the ones I know about are all in this article http://mashable.com/2010/07/14/distributed-developer-teams/ . I'm leaning towards recommending they just stay with what they have as it seems workable and any change would have to be worth the cost of switching to say github/basecamp or some other solution. Some details on the team: It's a distributed development shop. Meetings of the whole team in one room are rare. It's currently a very small development team (three developers). The project management software is used by developers and a product manager or two. What are you experiences with version control and project management web applications? Are there any you would recommend and you think are worth the switching cost of time to learn new services / implementing the change? Edit: After educating myself further on the options it appears DVCS offer powerful benefits that may be worth investing in now as opposed to later in the company's lifetime when the switching cost is higher: I'm a Subversion geek, why I should consider or not consider Mercurial or Git or any other DVCS?

    Read the article

  • What does SVN do better than git?

    - by doug
    No question that the majority of debates over programmer tools distill to either personal choice (by the user) or design emphasis, i.e., optimizing design according to particular uses cases (by the tool builder). Text Editors are probably the most prominent example--a coder who works on a Windows at work and codes in Haskell on the Mac at home, values cross-platform and compiler integration and so chooses Emacs over Textmate, etc. It's less common that a newly introduced technology is genuinely, demonstrably superior to the extant options. I wonder if this is in fact the case with version-control systems, in particular, centralized VCS (CVS, SVN) versus distributed VCS (git, hg)? I used SVN for about five years, and SVN is currently used where I work. A little less than three years ago, I switched to git (and gitHub) for all of my personal projects. I can think of a number of advantages of git over subversion (and which for the most part abstract to advantages of distributed over centralized VCS), but I cannot think of one contra example--some task (that's relevant and arises in a programmers usual workflow) that subversion does better than git. The only conclusion I have drawn from this is that I don't have any data--not that git is better, etc. My guess is that such counter-examples exist, hence this question.

    Read the article

  • Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

    - by Korakys
    Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

    Read the article

  • Installing Django on Windows

    - by Pranav
    Ever needed to install Django in a Microsoft Windows environment, here is a quick start guide to make that happen: Read through the official Django installation documentation, it might just save you a world of hut down the road. Download Python for your version of Windows. Install Python, my preference here is to put it into the Program Files folder under a folder named Python<Version> Add your chosen Python installation path into your Windows path environment variable. This is an optional step, however it allows you to just type python in the command line and have it fire up the Python interpreter. An easy way of adding it is going into Control Panel, System and into the Environment Variables section. Download Django, you can either download a compressed file or if you’re comfortable with using version control – check it out from the Django Subversion repository. Create a folder named django under your <Python installation directory>\Lib\site-packages\ folder. Using my example above that would have been C:\Program Files\Python25\Lib\site-packages\. If you chose to download the compressed file, open it and extract the contents of the django folder into your newly created folder. If you’d prefer to check it out from Subversion, the normal check out points are http://code.djangoproject.com/svn/django/trunk/ for the latest development copy or a named release which you’ll find under http://code.djangoproject.com/svn/django/tags/releases/. Done, you now have a working Django installation on Windows. At this point, it’d be pertinent to confirm that everything is working properly, which you can do by following the first Django tutorial. The tutorial will make mention of django-admin.py, which is a utility which offers some basic functionality to get you off the ground. The file is located in the bin folder under your Django installation directory. When you need to use it, you can either type in the full path to it or simply add that file path into your environment variables as well. Hope this helps!

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • Some help needed with setting up the PERFECT workflow for web development with 2-3 guys using subver

    - by Roeland
    Hey guys! I run a small web development company along side with my brother and friend. After doing extensive research I have decided on using subversion for version control. Here is how I currently plan on running typical development. Keep in mind there are 3 of us each in a separate location. I set up an account with springloops (springloops.com) subversion hosting. Each time I work on a new project, I create a repository for it. So lets say in this case I am working on site1. I want to have 3 versions of the site on the internet: Web Development - This is the server me and the other developers publish to. (site1.dev.bythepixel.com) Client Preview - This is the server that we update every few days with a good revision for the client to see. (site1.bythepixel.com) Live Site - The site I publish to when going live (site1.com) Each web development machine (at each location) will have a local copy of xamp running virtual host to allow multiple websites to be worked on. The root of the local copy is set up to be the same as the local copy of the subversion repository. This is set up so we can make small tweaks and preview them immediately. When some work has been done, a commit is made to the repository for the site. I will have the dev site automatically be pushed (its an option in springloops). Then, whenever I feel ready to push to the client site I will do so. Now, I have a few concerns with those work flow: I am using codeigniter currently, and in the config file I generally set the root of the site. Ex. http://www.site1.com. So, it looks like each time I publish to one of the internet servers, I will have to modify the config file? Is there any way to make it so certain files are set for each server? So when I hit publish to client preview it just uploads the config file for the client preview server. I don't want the live site , the client preview site and the dev site to share the same mysql server for a variety of reasons. So does this once again mean that I have to adjust the db server info each time I push to a different site? Does this workflow make sense? If you have any suggestion please let me know. I plan for this to be the work flow I use for the next few year. I just need to put a system in place that allows for future expansion! Thanks a bunch!!

    Read the article

  • dcommit to SVN in 1 commit after cherry-picking in git

    - by DJ
    I would like to know if there is a clean way to do git-svn dcommit of multiple local commits as 1 commit into subversion. The situation that I have is I am cherry picking some bug fixes changes from our trunk into the maintenance branch. The project preference is to have the bug fixes to be committed as 1 commit in subversion, but I would like to keep the history of changes that I had cherry-picked on my local git for references. Currently what I do is to do all cherry-picking on branch X and then do a squash merge into new branch Y. The dcommit will then be done from branch Y. Is there a better way to do it without using an intermediary branch?

    Read the article

  • Connect to SVN repository with Netbeans using SVN+SSH

    - by shuby_rocks
    Hello all, I am trying to connect to a SVN server in order to import my project into it with svn+ssh authentication method. I am using the NetBeans IDE (6.8) with subversion plugin installed on Windows XP SP2. I have plink installed with its path set in the Windows PATH env variable. When I use the similar looking repository URL (XXXX and YYYY replaced with sensible things) svn+ssh://XXXX@YYYY/home/dce/svn/trunk along with this external tunnel command plink -l <myUserName> -i C:\\privateKey.ppk I keep getting this error: org.tigris.subversion.javahl.ClientException: Network connection closed unexpectedly I searched about it on the Internet and tried many things but didn't work out. Please help if anybody has some idea what may be going wrong. Thanks a lot in advance.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >