Search Results

Search found 14377 results on 576 pages for 'video card'.

Page 26/576 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • SLI Video Cards

    - by Scott
    I'm configuring a new desktop. I'm looking through all PCI Express 2.0 x16 video cards on NewEgg at the moment. All cards seem to be stating that they have SLI Support or CrossFireX support. I know that these 2 technologies enable you to connect more than one video card together to create more of a powerful video experience. These cards that have this support seem to be more expensive that other cards though. When I did a NewEgg search for cards that did NOT have these two supports, no matches came up for PCI Express 2.0 x16 (haven't checked other interfaces yet though). Can you run an SLI/CrossFireX card as a single card (and if you can is it efficient or even good?), or do you need to have more than one card to run them? Also, do they make cards without these two technologies anymore, and are they even cheaper at this point? I really have no need for SLI/CrossFireX at all, so I was wondering what I should look into. Do cards without this technology not run on the PCI Express 2.0 x16 interface? Thanks ahead of time for all your help.

    Read the article

  • SLI Video Cards

    - by Scott
    I'm configuring a new desktop. I'm looking through all PCI Express 2.0 x16 video cards on NewEgg at the moment. All cards seem to be stating that they have SLI Support or CrossFireX support. I know that these 2 technologies enable you to connect more than one video card together to create more of a powerful video experience. These cards that have this support seem to be more expensive that other cards though. When I did a NewEgg search for cards that did NOT have these two supports, no matches came up for PCI Express 2.0 x16 (haven't checked other interfaces yet though). Can you run an SLI/CrossFireX card as a single card (and if you can is it efficient or even good?), or do you need to have more than one card to run them? Also, do they make cards without these two technologies anymore, and are they even cheaper at this point? I really have no need for SLI/CrossFireX at all, so I was wondering what I should look into. Do cards without this technology not run on the PCI Express 2.0 x16 interface? Thanks ahead of time for all your help.

    Read the article

  • How to set TV-out options under Linux of an Geforce 9600 GT video card

    - by polemon
    I'm using the TV-out connector of my Geforce 9600 GT to connect it to an old TV set. It's obviously in Composite mode, the other two cables of Component video are dead, only Pb/VIDEO labeled one gives me a signal. The picture appears black/white on the TV, I presume it's because the video card gives me an NTSC signal, but it's a PAL tv set. How do I change the TV-out from NTSC to PAL? My Component to SCART adapter hasn't arrived yet, but I think I should be able to set manually, whether the signal should be Composite or Component. How do I switch modes of the TV-out, between Component and Composite? I'm running Linux, so it's probably some settings I need to make in xorg.conf. Edit: I got this far: I need to set in the "Device" section of my xorg.conf: Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" The whole section looks like this now: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9600 GT" Option "AddARGBGLXVisuals" "True" Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" EndSection How can I list all available settings for "TVStandard" and "TVOutFormat"?

    Read the article

  • asus smartdotctor "can not find graphics card information"

    - by Trimack
    Hi, I am not sure that this is the place I can ask questions like this, but I'll give it a try. I have a Windows 7 64bit, new graphic card ASUS ENGTX260 MATRIX, installed latest graphics drivers nv19045_Win7Vista64 and ASUS Smart Doctor version 5.44. Unfortunately, after the required reboot when the smartdoctor is starting, I get an error "can not find graphics card information". I tried google, but none of that "run as admin"/"use compatibility" doesn't help. Perhaps here can I find my answers? Thanks in advance.

    Read the article

  • Wireless not working on XP (with Intel® PRO/Wireless 2200BG Network Connection card and Zyxel router

    - by JohnIdol
    Hi all, I just got a new router, cant' get my old xp laptop (Toshiba Satellite) to connect to it, no matter if it's WPA-PSK or WEP (I was kind of thinking with WEP it would've worked but it doesn't). When I go connect and put in credentials the dialog stays up for a few minutes then disappears with no message and no connection is established. Here's the spec of router and wireless card: Wilreless card: Intel® PRO/Wireless 2200BG Network Connection Router: Zyxel P-660-HW-T1 v3 Everything works fine on my Vista machine (for once). Any help appreciated!

    Read the article

  • IOCTL call error when trying to format an SD card

    - by masfenix
    Found an SD card (1GB) lying around. Thought I might pop that into my card reader and see if anything is on it. Nothing. There isn't even a file system on it. I right-click and go "format" but nothing happens. So I try in command. > format f: Insert new disk for drive F: and press ENTER when ready... Error in IOCTL call. What does this mean?

    Read the article

  • Can I use a SD card as cache instead of a Solid State Drive

    - by user654628
    I just installed a solid state drive a few days ago and I have been reading about how to preserve the file of it. I am running Windows 8 and my SSD has 256G of storage. I am using a laptop and cannot carry an external hard drive connected to my laptop to hold cache, temp files etc. I was wondering if a SD card would work. So I would use the SD card to hold cache, temp files and maybe index files from Windows, would this work and be effective (since I believe sd cards will also wear out)?

    Read the article

  • ffmpeg hangs when creating a video

    - by FearUs
    I am trying to insert an audio channel with a video: first of all I extract the audio from the original video for processing: ffmpeg -i lotr.mp4 lotr.wav I then extract all frames for later processing too: ffmpeg -i lotr.mp4 -f image2 %d.jpg When done processing audio and video streams, I try to create the video ffmpeg -f image2 -r 15 -i %d.jpg new.mp4 then merge with the audio: ffmpeg -i new.mp4 -i lotr.wav -map 0:0 -map 1:0 new_w_audio.mp4 Result: CPU activity = 100%, the process hangs and never returns. PS: I even tried it without modifying the images or the audio (so just trying to unpack then repack the video) but still the same output FFmpeg version SVN-r26400, Copyright (c) 2000-2011 the FFmpeg developers built on Jan 18 2011 04:07:05 with gcc 4.4.2 configuration: --enable-gpl --enable-version3 --enable-libgsm --enable-libvorb is --enable-libtheora --enable-libspeex --enable-libmp3lame --enable-libopenjpeg --enable-libschroedinger --enable-libopencore_amrwb --enable-libopencore_amrnb --enable-libvpx --disable-decoder=libvpx --arch=x86 --enable-runtime-cpudetect - -enable-libxvid --enable-libx264 --enable-librtmp --extra-libs='-lrtmp -lpolarss l -lws2_32 -lwinmm' --target-os=mingw32 --enable-avisynth --enable-w32threads -- cross-prefix=i686-mingw32- --cc='ccache i686-mingw32-gcc' --enable-memalign-hack libavutil 50.36. 0 / 50.36. 0 libavcore 0.16. 1 / 0.16. 1 libavcodec 52.108. 0 / 52.108. 0 libavformat 52.93. 0 / 52.93. 0 libavdevice 52. 2. 3 / 52. 2. 3 libavfilter 1.74. 0 / 1.74. 0 libswscale 0.12. 0 / 0.12. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'new.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf52.93.0 Duration: 00:00:29.66, start: 0.000000, bitrate: 193 kb/s Stream #0.0(und): Video: mpeg4, yuv420p, 200x134 [PAR 1:1 DAR 100:67], 192 k b/s, 15 fps, 15 tbr, 15 tbn, 15 tbc Metadata: creation_time : 1970-01-01 00:00:00 [wav @ 01fed010] max_analyze_duration reached Input #1, wav, from 'lotr.wav': Duration: 00:00:29.90, bitrate: 176 kb/s Stream #1.0: Audio: pcm_s16le, 11025 Hz, 1 channels, s16, 176 kb/s File 'new_w_audio.mp4' already exists. Overwrite ? [y/N] y [buffer @ 01b03820] w:200 h:134 pixfmt:yuv420p Output #0, mp4, to 'new_w_audio.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf52.93.0 Stream #0.0(und): Video: mpeg4, yuv420p, 200x134 [PAR 1:1 DAR 100:67], q=2-3 1, 200 kb/s, 15 tbn, 15 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1: Audio: aac, 11025 Hz, 1 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding

    Read the article

  • Trying to find the life expectancy of an unused flash card like SD

    - by wsams
    I read in the What's the life expectancy of an SD card? post SD cards are rated to hold data at something like 10 years sitting idle. I recall reading (not sure where) about re-energizing cards by occasionally inserting into a reader. Everything I read rates in read/write cycles and not physical decay. I'm wonder if buying a new sd card for every photo shoot would be beneficial if I could store the cards in a lock box? I was hoping for something much longer. Does anyone else agree with 10 years or maybe something more?

    Read the article

  • Dual-headed graphics card choice: DVI & VGA with 512MB _or_ DVI & DVI with 256MB

    - by TimH
    Which would you choose? Some more detail: I can choose between: A dual-headed card with both heads DVI but only 256MB of memory A dual-headed card with one VGA and one DVI, with 512MB of memory. Both monitors are 1600x1200 I'll be doing mostly business app development on the computer. No gameplay or advanced graphics work. It's running Win7 and is a quad-core i5. I'm thinking of going with 256MB one, just so both displays are DVI and I don't have to shift between sharp & blurry when I look from one screen to the other. But I'm not sure if the additional RAM would be a huge boon for some reason (Win7 GPU acceleration, for example? But with a quad-core, who cares?).

    Read the article

  • recover lost files from sd card(digital camera)

    - by user23950
    How do I recover lost data from sd card? I already tried using: Photorec Recuva Tune up undelete Pareto data recovery chkdsk x: /F from here: http://superuser.com/questions/128259/how-to-recover-images-from-memory-card But none of them worked. I think I've only lost the data yesterday. And I haven't used the camera. So there's a possibility that it is still there. But the question is how I can recover the images? I think its lost when I tried to connect the digicam with the computer. But the camera froze so I tried to remove the batteries then try again.

    Read the article

  • Graphics card failure, anything I could try...

    - by ILMV
    My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

    Read the article

  • Hot video card in server

    - by DougN
    Not sure if this belongs here or Superuser (I looked at Superuser -- suspect there are more hardware gurus here). I have a server that sits in a cabinet. It's connected to a small screen that is normally off. However, the video card is running at about 210 F all the time. The rest of the PC is pretty cool (getting temps from SpeedFan). Any thoughts on a way to quiet/calm/cool the video card since it's never really doing anything anyway? I'm usually logged out on the server, and no screen saver defined. Windows is already set to turn off the screen for power saving at 5 minutes.

    Read the article

  • Computer not acknowledging sound card after move

    - by Angela
    We just got our computer back from having moved and when I tried to hook our speaker system, the computer keeps telling me that I don't have a sound system installed. It's a Dell computer with the original surround/subwoofer system that it came with and was working fine before the move. I tried buying a new speaker system (Logitech) to see if it would work, but still saying I have no audio device installed and it's not showing up in my device manager. I opened up the computer and unplugged the sound card, then plugged it back in, still nothing. I put the install disc from the sound card in the cd-rom, but it's saying that I have no sound device hardware in my system.

    Read the article

  • Windows Experience Index Dropped After Adding Dedicated Graphics Card

    - by Ludo
    I purchased a new PC with a Gigabye Z68X-UD3H-B3. I had a Radeon HD 5450 graphics card spare, so I've added that instead of using the onboard graphics as I just presumed it would be better. But, my windows experience index has gone down. From 5.4 to 5. Dekstop Performance has dropped from 5.4 to 5, although gaming graphics has gone up from 5.9 to 6.2. I'm not actually going to be using the machine for gaming, just audio production, but I added the card as I'll possibly be doing video editing in future too. Why would this be? Can I trust windows experience index scores? Or is it possible the onboard stuff is just better for general desktop stuff? Thanks! Ludo.

    Read the article

  • Rotate monitor to portrait on Windows Server 2003 with ATI card

    - by user10179
    Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

    Read the article

  • How much bandwidth do I really need (to stream video)?

    - by BCS
    I'm looking to get an internet connection for my place (I have been using work, school and coffee shops) and I'm wondering how much bandwidth I really need to do different kinds of things? Google turns up lots of stuff but more than 1/2 are for servers and none of the rest give a "To do A you need X Mb" list.

    Read the article

  • Sound card problem, no audio device detected

    - by Paul
    I bought a new sound card because my built in sound card did not function. When I open YouTube, Media Player or anything that can create a sound my computer will hang up and sometimes when I start my computer it will hang when the Windows XP sound will activate. Update: My computer has no audio. It says NO AUDIO DEVICE. I already installed Realtek AC97 and Realtek High Definition Audio Driver and I also pasted stream.dll to the Windows and system32 folders and I restarted my computer but it still says NO AUDIO DEVICE. Please help me. Thanks

    Read the article

  • Graphics Card Compatability

    - by Aaron
    I am a first time builder and while I have the basic understanding of how to put a computer together, one final thing eludes me. What are the requirements for instaling 2 or more graphics cards on a computer? Example: EVGA 015-P3-1589-AR GeForce GTX 580 (Fermi) FTW Hydro Copper 2 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card ECS NGTX580-1536PI-F GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I am not planning on buying either of these cards in the near future. I simply am using them as an example because of the number of differences. As I understand it these two cards will work together (given the proper motherboard) because the only thing that matters is that they are both GeForce GTX 580. Is my assumption correct? If not, why?

    Read the article

  • Restart my graphics card without rebooting?

    - by defaye
    Wondered if it is possible to use DevCon to restart a display device as a stop-gap solution to artifacts left over from a graphics card malfunction? In particular it leaves my cursor very un-user-friendly: I found out the hardware ID of my display adapter through device manager (below) [(windows key + pause break) - device manager - display adapters - right click your display adapter - properties - details - hardware ids.] I tried the commands (opened with admin privileges) devcon restart "PCI\VEN_1002" and devcon restart =display but it always come back with No devices restarted.. Is it even possible to restart the graphics card without a system reboot?

    Read the article

  • Sound card problem, no audio device detected

    - by Paul
    I bought a new sound card because my built in sound card did not function. When I open YouTube, Media Player or anything that can create a sound my computer will hang up and sometimes when I start my computer it will hang when the Windows XP sound will activate. Update: My computer has no audio. It says NO AUDIO DEVICE. I already installed Realtek AC97 and Realtek High Definition Audio Driver and I also pasted stream.dll to the Windows and system32 folders and I restarted my computer but it still says NO AUDIO DEVICE. Please help me. Thanks

    Read the article

  • Recover data from SD card

    - by Paul Tarjan
    I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

    Read the article

  • Removing integrated video card drivers broke other hardware?

    - by jsnlxndrlv
    I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

    Read the article

  • What video format(s) should be used to serve Macs, PCs, and Mobile Devices?

    - by Jeffrey Blake
    In 2007, I started a site based on streaming and downloading poker strategy videos. At that point in time, the best solution I came up with for supporting users of Macs and PCs was to provide the videos in both WMV and FLV formats. Later we added an M4V version to support iPhones/iPods. Obviously, things have changed a bit since that time. I would like to revisit our format decision to see if there is anything better that we could offer, preferrably with wider support among all devices (so that we can reduce the number of formats offered, if possible). Is FLV + WMV + M4V the best solution? Is there something else we should consider? What about Android devices?

    Read the article

  • How to display downloaded youtube annotations ( not captions) on offline video player?

    - by kowalsk
    i need to display the annotations for some of my downloaded youtube videos. It's also important to make them closeable. Making them clickable would also be nice. What i found out so far: From what i understand there there is a vlc plugin/extension that could also render the annotations but i'm having a hard time finding it. Mplayer might also be an option but i'd have to convert the xml files to .bmp and then use a bmov filter to play them. Any suggestions welcome. Edit: to further clarify i would like to display/overlay annotations from a youtube xml file (i'm willing to go through a conversion step if i have to) pretty much the same way i can display subtitles from a srt or sub file. Edit2: I'm open to using other players too ( if vlc is not a feasible option for what i want)

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >