type coercion - Page 260

Wireless Problem on Acer Aspire 5610z

- by Ugur Can Yalaki

I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

Read the article

JQuery + WCF + HTTP 404 Error

- by hangar18

HI All, I've searched high and low and finally decided to post a query here. I'm writing a very basic HTML page from which I'm trying to call a WCF service using jQuery and parse it using JSON. Service: IMyDemo.cs [ServiceContract] public interface IMyDemo { [WebInvoke(Method = "POST", BodyStyle = WebMessageBodyStyle.WrappedRequest, ResponseFormat = WebMessageFormat.Json)] Employee DoWork(); [OperationContract] [WebInvoke(Method = "POST", BodyStyle = WebMessageBodyStyle.WrappedRequest, ResponseFormat = WebMessageFormat.Json)] Employee GetEmp(int age, string name); } [DataContract] public class Employee { [DataMember] public int EmpId { get; set; } [DataMember] public string EmpName { get; set; } [DataMember] public int EmpSalary { get; set; } } MyDemo.svc.cs public Employee DoWork() { // Add your operation implementation here Employee obj = new Employee() { EmpSalary = 12, EmpName = "SomeName" }; return obj; } public Employee GetEmp(int age, string name) { Employee emp = new Employee(); if (age > 0) emp.EmpSalary = 12 + age; if (!string.IsNullOrEmpty(name)) emp.EmpName = "Server" + name; return emp; } WEb.Config <system.serviceModel> <services> <service behaviorConfiguration="EmployeesBehavior" name="MySample.MyDemo"> <endpoint address="" binding="webHttpBinding" contract="MySample.IMyDemo" behaviorConfiguration="EmployeesBehavior"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="EmployeesBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> <endpointBehaviors> <behavior name="EmployeesBehavior"> <webHttp/> </behavior> </endpointBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> MyDemo.htm <head> <title></title> <script type="text/javascript" language="javascript" src="Scripts/jquery-1.4.1.js"></script> <script type="text/javascript" language="javascript" src="Scripts/json.js"></script> <script type="text/javascript"> //create a global javascript object for the AJAX defaults. debugger; var ajaxDefaults = {}; ajaxDefaults.base = { type: "POST", timeout : 1000, dataFilter: function (data) { //see http://encosia.com/2009/06/29/never-worry-about-asp-net-ajaxs-d-again/ data = JSON.parse(data); //use the JSON2 library if you aren’t using FF3+, IE8, Safari 3/Google Chrome return data.hasOwnProperty("d") ? data.d : data; }, error: function (xhr) { //see if (!xhr) return; if (xhr.responseText) { var response = JSON.parse(xhr.responseText); //console.log works in FF + Firebug only, replace this code if (response) alert(response); else alert("Unknown server error"); } } }; ajaxDefaults.json = $.extend(ajaxDefaults.base, { //see http://encosia.com/2008/03/27/using-jquery-to-consume-aspnet-json-web-services/ contentType: "application/json; charset=utf-8", dataType: "json" }); var ops = { baseUrl: "/MyService/MySample/MyDemo.svc/", doWork: function () { //see http://api.jquery.com/jQuery.extend/ var ajaxOptions = $.extend(ajaxDefaults.json, { url: ops.baseUrl + "DoWork", data: "{}", success: function (msg) { console.log("success"); console.log(typeof msg); if (typeof msg !== "undefined") { console.log(msg); } } }); $.ajax(ajaxOptions); return false; }, getEmp: function () { var ajaxOpts = $.extend(ajaxDefaults.json, { url: ops.baseUrl + "GetEmp", data: JSON.stringify({ age: 12, name: "NameName" }), success: function (msg) { $("span#lbl").html("age: " + msg.Age + "name:" + msg.Name); } }); $.ajax(ajaxOpts); return false; } } </script> </head> <body> <span id="lbl">abc</span> <br /><br /> <input type="button" value="GetEmployee" id="btnGetEmployee" onclick="javascript:ops.getEmp();" /> </body> I'm just not able to get this running. When I debug, I see the error being returned from the call is " Server Error in '/jQuerySample' Application. <h2> <i>HTTP Error 404 - Not Found.</i> </h2></span> " Looks like I'm missing something basic here. My sample is based on this I've been trying to fix the code for sometime now so I'd like you to take a look and see if you can figure out what is it that I'm doing wrong here. I'm able to see that the service is created when I browse the service in IE. I've also tried changing the setting as mentioned here Appreciate your help. I'm gonna blog about this as soon as the issue is resolved for the benefit of other devs Thanks -Soni

Read the article

Entity Framework 4.3.1 Code based Migrations and Connector/Net 6.6

- by GABMARTINEZ

Code-based migrations is a new feature as part of the Connector/Net support for Entity Framework 4.3.1. In this tutorial we'll see how we can use it so we can keep track of the changes done to our database creating a new application using the code first approach. If you don't have a clear idea about how code first works we highly recommend you to check this subject before going further with this tutorial. Creating our Model and Database with Code First From VS 2010 1. Create a new console application 2. Add the latest Entity Framework official package using Package Manager Console (Tools Menu, then Library Package Manager -> Package Manager Console). In the Package Manager Console we have to type Install-Package EntityFramework This will add the latest version of this library. We will also need to make some changes to your config file. A <configSections> was added which contains the version you have from EntityFramework. An <entityFramework> section was also added where you can set up some initialization. This section is optional and by default is generated to use SQL Express. Since we don't need it for now (we'll see more about it below) let's leave this section empty as shown below. 3. Create a new Model with a simple entity. 4. Enable Migrations to generate the our Configuration class. In the Package Manager Console we have to type Enable-Migrations; This will make some changes in our application. It will create a new folder called Migrations where all the migrations representing the changes we do to our model. It will also create a Configuration class that we'll be using to initialize our SQL Generator and some other values like if we want to enable Automatic Migrations. You can see that it already has the name of our DbContext. You can also create you Configuration class manually. 5. Specify our Model Provider. We need to specify in our Class Configuration that we'll be using MySQLClient since this is not part of the generated code. Also please make sure you have added the MySql.Data and the MySql.Data.Entity references to your project. using MySql.Data.Entity; // Add the MySQL.Data.Entity namespace public Configuration() { this.AutomaticMigrationsEnabled = false; SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator()); // This will add our MySQLClient as SQL Generator } 6. Add our Data Provider and set up our connection string <connectionStrings> <add name="PersonalContext" connectionString="server=localhost;User Id=root;database=Personal;" providerName="MySql.Data.MySqlClient" /> </connectionStrings> <system.data> <DbProviderFactories> <remove invariant="MySql.Data.MySqlClient" /> <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.6.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" /> </DbProviderFactories> </system.data> * The version recommended to use of Connector/Net is 6.6.2 or earlier. At this point we can create our database and then start working with Migrations. So let's do some data access so our database get's created. You can run your application and you'll get your database Personal as specified in our config file. Add our first migration Migrations are a great resource as we can have a record for all the changes done and will generate the MySQL statements required to apply these changes to the database. Let's add a new property to our Person class public string Email { get; set; } If you try to run your application it will throw an exception saying The model backing the 'PersonelContext' context has changed since the database was created. Consider using Code First Migrations to update the database (http://go.microsoft.com/fwlink/?LinkId=238269). So as suggested let's add our first migration for this change. In the Package Manager Console let's type Add-Migration AddEmailColumn Now we have the corresponding class which generate the necessary operations to update our database. namespace MigrationsFromScratch.Migrations { using System.Data.Entity.Migrations; public partial class AddEmailColumn : DbMigration { public override void Up(){ AddColumn("People", "Email", c => c.String(unicode: false)); } public override void Down() { DropColumn("People", "Email"); } } } In the Package Manager Console let's type Update-Database Now you can check your database to see all changes were succesfully applied. Now let's add a second change and generate our second migration public class Person { [Key] public int PersonId { get; set;} public string Name { get; set; } public string Address {get; set;} public string Email { get; set; } public List<Skill> Skills { get; set; } } public class Skill { [Key] public int SkillId { get; set; } public string Description { get; set; } } public class PersonelContext : DbContext { public DbSet<Person> Persons { get; set; } public DbSet<Skill> Skills { get; set; } } If you would like to customize any part of this code you can do that at this step. You can see there is the up method which can update your database and the down that can revert the changes done. If you customize any code you should make sure to customize in both methods. Now let's apply this change. Update-database -verbose I added the verbose flag so you can see all the SQL generated statements to be run. Downgrading changes So far we have always upgraded to the latest migration, but there may be times when you want downgrade to a specific migration. Let's say we want to return to the status we have before our last migration. We can use the -TargetMigration option to specify the migration we'd like to return. Also you can use the -verbose flag. If you like to go back to the Initial state you can do: Update-Database -TargetMigration:$InitialDatabase or equivalent: Update-Database -TargetMigration:0 Migrations doesn't allow by default a migration that would ocurr in a data loss. One case when you can got this message is for example in a DropColumn operation. You can override this configuration by setting AutomaticMigrationDataLossAllowed to true in the configuration class. Also you can set your Database Initializer in case you want that these Migrations can be applied automatically and you don't have to go all the way through creating a migration and updating later the changes. Let's see how. Database Initialization by Code We can specify an initialization strategy by using Database.SetInitializer (http://msdn.microsoft.com/en-us/library/gg679461(v=vs.103)). One of the strategies that I found very useful when you are at a development stage (I mean not for production) is the MigrateDatabaseToLatestVersion. This strategy will make all the necessary migrations each time there is a change in our model that needs a database replication, this also implies that we have to enable AutomaticMigrationsEnabled flag in our Configuration class. public Configuration() { AutomaticMigrationsEnabled = true; AutomaticMigrationDataLossAllowed = true; SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator()); // This will add our MySQLClient as SQL Generator } In the new EntityFramework section of your Config file we can set this at a context level basis. The syntax is as follows: <contexts> <context type="Custom DbContext name, Assembly name"> <databaseInitializer type="System.Data.Entity.MigrateDatabaseToLatestVersion`2[[ Custom DbContext name, Assembly name], [Configuration class name, Assembly name]], EntityFramework" /> </context> </contexts> In our example this would be: The syntax is kind of odd but very convenient. This way all changes will always be applied when we do any data access in our application. There are a lot of new things to explore in EF 4.3.1 and Migrations so we'll continue writing some more posts about it. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community. Hope you found this information useful. Happy MySQL/.Net Coding!

Read the article

Integrating Windows Form Click Once Application into SharePoint 2007 – Part 2 of 4

- by Kelly Jones

In my last post, I explained why we decided to use a Click Once application to solve our business problem. To quickly review, we needed a way for our business users to upload documents to a SharePoint 2007 document library in mass, set the meta data, set the permissions per document, and to do so easily. Let’s look at the pieces that make up our solution. First, we have the Windows Form application. This app is deployed using Click Once and calls SharePoint web services in order to upload files and then calls web services to set the meta data (SharePoint columns and permissions). Second, we have a custom action. The custom action is responsible for providing our users a link that will launch the Windows app, as well as passing values to it via the query string. And lastly, we have the web services that the Windows Form application calls. For our solution, we used both out of the box web services and a custom web service in order to set the column values in the document library as well as the permissions on the documents. Now, let’s look at the technical details of each of these pieces. (All of the code is downloadable from here: ) Windows Form application deployed via Click Once The Windows Form application, called “Custom Upload”, has just a few classes in it: Custom Upload -- the form FileList.xsd -- the dataset used to track the names of the files and their meta data values SharePointUpload -- this class handles uploading the file SharePointUpload uses an HttpWebRequest to transfer the file to the web server. We had to change this code from a WebClient object to the HttpWebRequest object, because we needed to be able to set the time out value. public bool UploadDocument(string localFilename, string remoteFilename) { bool result = true; //Need to use an HttpWebRequest object instead of a WebClient object // so we can set the timeout (WebClient doesn't allow you to set the timeout!) HttpWebRequest req = (HttpWebRequest)WebRequest.Create(remoteFilename); try { req.Method = "PUT"; req.Timeout = 60 * 1000; //convert seconds to milliseconds req.AllowWriteStreamBuffering = true; req.Credentials = System.Net.CredentialCache.DefaultCredentials; req.SendChunked = false; req.KeepAlive = true; Stream reqStream = req.GetRequestStream(); FileStream rdr = new FileStream(localFilename, FileMode.Open, FileAccess.Read); byte[] inData = new byte[4096]; int bytesRead = rdr.Read(inData, 0, inData.Length); while (bytesRead > 0) { reqStream.Write(inData, 0, bytesRead); bytesRead = rdr.Read(inData, 0, inData.Length); } reqStream.Close(); rdr.Close(); System.Net.HttpWebResponse response = (HttpWebResponse)req.GetResponse(); if (response.StatusCode != HttpStatusCode.OK && response.StatusCode != HttpStatusCode.Created) { String msg = String.Format("An error occurred while uploading this file: {0}\n\nError response code: {1}", System.IO.Path.GetFileName(localFilename), response.StatusCode.ToString()); LogWarning(msg, "2ACFFCCA-59BA-40c8-A9AB-05FA3331D223"); result = false; } } catch (Exception ex) { LogException(ex, "{E9D62A93-D298-470d-A6BA-19AAB237978A}"); result = false; } return result; } The class also contains the LogException() and LogWarning() methods. When the application is launched, it parses the query string for some initial values. The query string looks like this: string queryString = "Srv=clickonce&Sec=N&Doc=DMI&SiteName=&Speed=128000&Max=50"; This Srv is the path to the server (my Virtual Machine is name “clickonce”), the Sec is short for security – meaning HTTPS or HTTP, the Doc is the shortcut for which document library to use, and SiteName is the name of the SharePoint site. Speed is used to calculate an estimate for download speed for each file. We added this so our users uploading documents would realize how long it might take for clients in remote locations (using slow WAN connections) to download the documents. The last value, Max, is the maximum size that the SharePoint site will allow documents to be. This allowed us to give users a warning that a file is too large before we even attempt to upload it. Another critical piece is the meta data collection. We organized our site using SharePoint content types, so when the app loads, it gets a list of the document library’s content types. The user then select one of the content types from the drop down list, and then we query SharePoint to get a list of the fields that make up that content type. We used both an out of the box web service, and one that we custom built, in order to get these values. Once we have the content type fields, we then add controls to the form. Which type of control we add depends on the data type of the field. (DateTime pickers for date/time fields, etc) We didn’t write code to cover every data type, since we were working with a limited set of content types and field data types. Here’s a screen shot of the Form, before and after someone has selected the content types and our code has added the custom controls: The other piece of meta data we collect is the in the upper right corner of the app, “Users with access”. This box lists the different SharePoint Groups that we have set up and by checking the boxes, the user can set the permissions on the uploaded documents. All of this meta data is collected and submitted to our custom web service, which then sets the values on the documents on the list. We’ll look at these web services in a future post. In the next post, we’ll walk through the Custom Action we built.

Read the article

Using Delegates in C# (Part 1)

- by rajbk

This post provides a very basic introduction of delegates in C#. Part 2 of this post can be read here. A delegate is a class that is derived from System.Delegate. It contains a list of one or more methods called an invocation list. When a delegate instance is “invoked” with the arguments as defined in the signature of the delegate, each of the methods in the invocation list gets invoked with the arguments. The code below shows example with static and instance methods respectively: Static Methods 1: using System; 2: using System.Linq; 3: using System.Collections.Generic; 4: 5: public delegate void SayName(string name); 6: 7: public class Program 8: { 9: [STAThread] 10: static void Main(string[] args) 11: { 12: SayName englishDelegate = new SayName(SayNameInEnglish); 13: SayName frenchDelegate = new SayName(SayNameInFrench); 14: SayName combinedDelegate =(SayName)Delegate.Combine(englishDelegate, frenchDelegate); 15: 16: combinedDelegate.Invoke("Tom"); 17: Console.ReadLine(); 18: } 19: 20: static void SayNameInFrench(string name) { 21: Console.WriteLine("J'ai m'appelle " + name); 22: } 23: 24: static void SayNameInEnglish(string name) { 25: Console.WriteLine("My name is " + name); 26: } 27: } We have declared a delegate of type SayName with return type of void and taking an input parameter of name of type string. On line 12, we create a new instance of this delegate which refers to a static method - SayNameInEnglish. SayNameInEnglish has the same return type and parameter list as the delegate declaration. Once a delegate is instantiated, the instance will always refer to the same target. Delegates are immutable. On line 13, we create a new instance of the delegate but point to a different static method. As you may recall, a delegate instance encapsulates an invocation list. You create an invocation list by combining delegates using the Delegate.Combine method (there is an easier syntax as you will see later). When two non null delegate instances are combined, their invocation lists get combined to form a new invocation list. This is done in line 14. On line 16, we invoke the delegate with the Invoke method and pass in the required string parameter. Since the delegate has an invocation list with two entries, each of the method in the invocation list is invoked. If an unhandled exception occurs during the invocation of one of these methods, the exception gets bubbled up to the line where the invocation was made (line 16). If a delegate is null and you try to invoke it, you will get a System.NullReferenceException. We see the following output when the method is run: My name is TomJ'ai m'apelle Tom Instance Methods The code below outputs the same results as before. The only difference here is we are creating delegates that point to a target object (an instance of Translator) and instance methods which have the same signature as the delegate type. The target object can never be null. We also use the short cut syntax += to combine the delegates instead of Delegate.Combine. 1: public delegate void SayName(string name); 2: 3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: Translator translator = new Translator(); 9: SayName combinedDelegate = new SayName(translator.SayNameInEnglish); 10: combinedDelegate += new SayName(translator.SayNameInFrench); 11: 12: combinedDelegate.Invoke("Tom"); 13: Console.ReadLine(); 14: } 15: } 16: 17: public class Translator { 18: public void SayNameInFrench(string name) { 19: Console.WriteLine("J'ai m'appelle " + name); 20: } 21: 22: public void SayNameInEnglish(string name) { 23: Console.WriteLine("My name is " + name); 24: } 25: } A delegate can be removed from a combination of delegates by using the –= operator. Removing a delegate from an empty list or removing a delegate that does not exist in a non empty list will not result in an exception. Delegates are invoked synchronously using the Invoke method. We can also invoke them asynchronously using the BeginInvoke and EndInvoke methods which are compiler generated.

Read the article

Configuring Application/User Settings in WPF the easy way.

- by mbcrump

In this tutorial, we are going to configure the application/user settings in a WPF application the easy way. Most example that I’ve seen on the net involve the ConfigurationManager class and involve creating your own XML file from scratch. I am going to show you a easier way to do it. (in my humble opinion) First, the definitions: User Setting – is designed to be something specific to the user. For example, one user may have a requirement to see certain stocks, news articles or local weather. This can be set at run-time. Application Setting – is designed to store information such as a database connection string. These settings are read-only at run-time. 1) Lets create a new WPF Project and play with a few settings. Once you are inside VS, then paste the following code snippet inside the <Grid> tags. <Grid> <TextBox Height="23" HorizontalAlignment="Left" Margin="12,11,0,0" Name="textBox1" VerticalAlignment="Top" Width="285" Grid.ColumnSpan="2" /> <Button Content="Set Title" Name="button2" Click="button2_Click" Margin="108,40,96,114" /> <TextBlock Height="23" Name="textBlock1" Text="TextBlock" VerticalAlignment="Bottom" Width="377" /> </Grid> Basically, its just a Textbox, Button and TextBlock. The main Window should look like the following: 2) Now we are going to setup our Configuration Settings. Look in the Solution Explorer and double click on the Settings.settings file. Make sure that your settings file looks just like mine included below: What just happened was the designer created an XML file and created the Settings.Designer.cs file which looks like this: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace WPFExam.Properties { [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")] internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase { private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings()))); public static Settings Default { get { return defaultInstance; } } [global::System.Configuration.UserScopedSettingAttribute()] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Configuration.DefaultSettingValueAttribute("ApplicationName")] public string ApplicationName { get { return ((string)(this["ApplicationName"])); } set { this["ApplicationName"] = value; } } [global::System.Configuration.ApplicationScopedSettingAttribute()] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Configuration.DefaultSettingValueAttribute("SQL_SRV342")] public string DatabaseServerName { get { return ((string)(this["DatabaseServerName"])); } } } } The XML File is named app.config and looks like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="WPFExam.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false" /> </sectionGroup> <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="WPFExam.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" /> </sectionGroup> </configSections> <userSettings> <WPFExam.Properties.Settings> <setting name="ApplicationName" serializeAs="String"> <value>ApplicationName</value> </setting> </WPFExam.Properties.Settings> </userSettings> <applicationSettings> <WPFExam.Properties.Settings> <setting name="DatabaseServerName" serializeAs="String"> <value>SQL_SRV342</value> </setting> </WPFExam.Properties.Settings> </applicationSettings> </configuration> 3) The only left now is the code behind the button. Double click the button and replace the MainWindow() method with the following code snippet. public MainWindow() { InitializeComponent(); this.Title = Properties.Settings.Default.ApplicationName; textBox1.Text = Properties.Settings.Default.ApplicationName; textBlock1.Text = Properties.Settings.Default.DatabaseServerName; } private void button2_Click(object sender, RoutedEventArgs e) { Properties.Settings.Default.ApplicationName = textBox1.Text.ToString(); Properties.Settings.Default.Save(); } Run the application and type something in the textbox and hit the Set Title button. Now, restart the application and you should see the text that you entered earlier. If you look at the button2 click event, you will see that it was actually 2 lines of codes to save to the configuration file. I hope this helps, for more information consult MSDN.

Read the article

ASP.NET MVC 3 Hosting :: How to Deploy Web Apps Using ASP.NET MVC 3, Razor and EF Code First - Part II

- by mbridge

In previous post, I have discussed on how to work with ASP.NET MVC 3 and EF Code First for developing web apps. In this post, I will demonstrate on working with domain entity with deep object graph, Service Layer and View Models and will also complete the rest of the demo application. In the previous post, we have done CRUD operations against Category entity and this post will be focus on Expense entity those have an association with Category entity. Domain Model Category Entity public class Category { public int CategoryId { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public virtual ICollection<Expense> Expenses { get; set; } } Expense Entity public class Expense { public int ExpenseId { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } public int CategoryId { get; set; } public virtual Category Category { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. Repository class for Expense Transaction Let’s create repository class for handling CRUD operations for Expense entity public class ExpenseRepository : RepositoryBase<Expense>, IExpenseRepository { public ExpenseRepository(IDatabaseFactory databaseFactory) : base(databaseFactory) { } } public interface IExpenseRepository : IRepository<Expense> { } Service Layer If you are new to Service Layer, checkout Martin Fowler's article Service Layer . According to Martin Fowler, Service Layer defines an application's boundary and its set of available operations from the perspective of interfacing client layers. It encapsulates the application's business logic, controlling transactions and coordinating responses in the implementation of its operations. Controller classes should be lightweight and do not put much of business logic onto it. We can use the service layer as the business logic layer and can encapsulate the rules of the application. Let’s create a Service class for coordinates the transaction for Expense public interface IExpenseService { IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime ednDate); Expense GetExpense(int id); void CreateExpense(Expense expense); void DeleteExpense(int id); void SaveExpense(); } public class ExpenseService : IExpenseService { private readonly IExpenseRepository expenseRepository; private readonly IUnitOfWork unitOfWork; public ExpenseService(IExpenseRepository expenseRepository, IUnitOfWork unitOfWork) { this.expenseRepository = expenseRepository; this.unitOfWork = unitOfWork; } public IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime endDate) { var expenses = expenseRepository.GetMany(exp => exp.Date >= startDate && exp.Date <= endDate); return expenses; } public void CreateExpense(Expense expense) { expenseRepository.Add(expense); unitOfWork.Commit(); } public Expense GetExpense(int id) { var expense = expenseRepository.GetById(id); return expense; } public void DeleteExpense(int id) { var expense = expenseRepository.GetById(id); expenseRepository.Delete(expense); unitOfWork.Commit(); } public void SaveExpense() { unitOfWork.Commit(); } } View Model for Expense Transactions In real world ASP.NET MVC applications, we need to design model objects especially for our views. Our domain objects are mainly designed for the needs for domain model and it is representing the domain of our applications. On the other hand, View Model objects are designed for our needs for views. We have an Expense domain entity that has an association with Category. While we are creating a new Expense, we have to specify that in which Category belongs with the new Expense transaction. The user interface for Expense transaction will have form fields for representing the Expense entity and a CategoryId for representing the Category. So let's create view model for representing the need for Expense transactions. public class ExpenseViewModel { public int ExpenseId { get; set; } [Required(ErrorMessage = "Category Required")] public int CategoryId { get; set; } [Required(ErrorMessage = "Transaction Required")] public string Transaction { get; set; } [Required(ErrorMessage = "Date Required")] public DateTime Date { get; set; } [Required(ErrorMessage = "Amount Required")] public double Amount { get; set; } public IEnumerable<SelectListItem> Category { get; set; } } The ExpenseViewModel is designed for the purpose of View template and contains the all validation rules. It has properties for mapping values to Expense entity and a property Category for binding values to a drop-down for list values of Category. Create Expense transaction Let’s create action methods in the ExpenseController for creating expense transactions public ActionResult Create() { var expenseModel = new ExpenseViewModel(); var categories = categoryService.GetCategories(); expenseModel.Category = categories.ToSelectListItems(-1); expenseModel.Date = DateTime.Today; return View(expenseModel); } [HttpPost] public ActionResult Create(ExpenseViewModel expenseViewModel) { if (!ModelState.IsValid) { var categories = categoryService.GetCategories(); expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId); return View("Save", expenseViewModel); } Expense expense=new Expense(); ModelCopier.CopyModel(expenseViewModel,expense); expenseService.CreateExpense(expense); return RedirectToAction("Index"); } In the Create action method for HttpGet request, we have created an instance of our View Model ExpenseViewModel with Category information for the drop-down list and passing the Model object to View template. The extension method ToSelectListItems is shown below public static IEnumerable<SelectListItem> ToSelectListItems( this IEnumerable<Category> categories, int selectedId) { return categories.OrderBy(category => category.Name) .Select(category => new SelectListItem { Selected = (category.CategoryId == selectedId), Text = category.Name, Value = category.CategoryId.ToString() }); } In the Create action method for HttpPost, our view model object ExpenseViewModel will map with posted form input values. We need to create an instance of Expense for the persistence purpose. So we need to copy values from ExpenseViewModel object to Expense object. ASP.NET MVC futures assembly provides a static class ModelCopier that can use for copying values between Model objects. ModelCopier class has two static methods - CopyCollection and CopyModel.CopyCollection method will copy values between two collection objects and CopyModel will copy values between two model objects. We have used CopyModel method of ModelCopier class for copying values from expenseViewModel object to expense object. Finally we did a call to CreateExpense method of ExpenseService class for persisting new expense transaction. List Expense Transactions We want to list expense transactions based on a date range. So let’s create action method for filtering expense transactions with a specified date range. public ActionResult Index(DateTime? startDate, DateTime? endDate) { //If date is not passed, take current month's first and last dte DateTime dtNow; dtNow = DateTime.Today; if (!startDate.HasValue) { startDate = new DateTime(dtNow.Year, dtNow.Month, 1); endDate = startDate.Value.AddMonths(1).AddDays(-1); } //take last date of start date's month, if end date is not passed if (startDate.HasValue && !endDate.HasValue) { endDate = (new DateTime(startDate.Value.Year, startDate.Value.Month, 1)).AddMonths(1).AddDays(-1); } var expenses = expenseService.GetExpenses(startDate.Value ,endDate.Value); //if request is Ajax will return partial view if (Request.IsAjaxRequest()) { return PartialView("ExpenseList", expenses); } //set start date and end date to ViewBag dictionary ViewBag.StartDate = startDate.Value.ToShortDateString(); ViewBag.EndDate = endDate.Value.ToShortDateString(); //if request is not ajax return View(expenses); } We are using the above Index Action method for both Ajax requests and normal requests. If there is a request for Ajax, we will call the PartialView ExpenseList. Razor Views for listing Expense information Let’s create view templates in Razor for showing list of Expense information ExpenseList.cshtml @model IEnumerable<MyFinance.Domain.Expense> <table> <tr> <th>Actions</th> <th>Category</th> <th> Transaction </th> <th> Date </th> <th> Amount </th> </tr> @foreach (var item in Model) { <tr> <td> @Html.ActionLink("Edit", "Edit",new { id = item.ExpenseId }) @Ajax.ActionLink("Delete", "Delete", new { id = item.ExpenseId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divExpenseList" }) </td> <td> @item.Category.Name </td> <td> @item.Transaction </td> <td> @String.Format("{0:d}", item.Date) </td> <td> @String.Format("{0:F}", item.Amount) </td> </tr> } </table> <p> @Html.ActionLink("Create New Expense", "Create") | @Html.ActionLink("Create New Category", "Create","Category") </p> Index.cshtml @using MyFinance.Helpers; @model IEnumerable<MyFinance.Domain.Expense> @{ ViewBag.Title = "Index"; } <h2>Expense List</h2> <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-ui.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.ui.datepicker.js")" type="text/javascript"></script> <link href="@Url.Content("~/Content/jquery-ui-1.8.6.custom.css")" rel="stylesheet" type="text/css" /> @using (Ajax.BeginForm(new AjaxOptions{ UpdateTargetId="divExpenseList", HttpMethod="Get"})) { <table> <tr> <td> <div> Start Date: @Html.TextBox("StartDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["StartDate"].ToString())), new { @class = "ui-datepicker" }) </div> </td> <td><div> End Date: @Html.TextBox("EndDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["EndDate"].ToString())), new { @class = "ui-datepicker" }) </div></td> <td> <input type="submit" value="Search By TransactionDate" /></td> </tr> </table> } <div id="divExpenseList"> @Html.Partial("ExpenseList", Model) </div> <script type="text/javascript"> $().ready(function () { $('.ui-datepicker').datepicker({ dateFormat: 'mm/dd/yy', buttonImage: '@Url.Content("~/Content/calendar.gif")', buttonImageOnly: true, showOn: "button" }); }); </script> Ajax search functionality using Ajax.BeginForm The search functionality of Index view is providing Ajax functionality using Ajax.BeginForm. The Ajax.BeginForm() method writes an opening <form> tag to the response. You can use this method in a using block. In that case, the method renders the closing </form> tag at the end of the using block and the form is submitted asynchronously by using JavaScript. The search functionality will call the Index Action method and this will return partial view ExpenseList for updating the search result. We want to update the response UI for the Ajax request onto divExpenseList element. So we have specified the UpdateTargetId as "divExpenseList" in the Ajax.BeginForm method. Add jQuery DatePicker Our search functionality is using a date range so we are providing two date pickers using jQuery datepicker. You need to add reference to the following JavaScript files to working with jQuery datepicker. - jquery-ui.js - jquery.ui.datepicker.js For theme support for datepicker, we can use a customized CSS class. In our example we have used a CSS file “jquery-ui-1.8.6.custom.css”. For more details about the datepicker component, visit jquery UI website at http://jqueryui.com/demos/datepicker . In the jQuery ready event, we have used following JavaScript function to initialize the UI element to show date picker. <script type="text/javascript"> $().ready(function () { $('.ui-datepicker').datepicker({ dateFormat: 'mm/dd/yy', buttonImage: '@Url.Content("~/Content/calendar.gif")', buttonImageOnly: true, showOn: "button" }); }); </script> Summary In this two-part series, we have created a simple web application using ASP.NET MVC 3 RTM, Razor and EF Code First CTP 5. I have demonstrated patterns and practices such as Dependency Injection, Repository pattern, Unit of Work, ViewModel and Service Layer. My primary objective was to demonstrate different practices and options for developing web apps using ASP.NET MVC 3 and EF Code First. You can implement these approaches in your own way for building web apps using ASP.NET MVC 3. I will refactor this demo app on later time.

Read the article

A Basic Thread

- by Joe Mayo

Most of the programs written are single-threaded, meaning that they run on the main execution thread. For various reasons such as performance, scalability, and/or responsiveness additional threads can be useful. .NET has extensive threading support, from the basic threads introduced in v1.0 to the Task Parallel Library (TPL) introduced in v4.0. To get started with threads, it's helpful to begin with the basics; starting a Thread. Why Do I Care? The scenario I'll use for needing to use a thread is writing to a file. Sometimes, writing to a file takes a while and you don't want your user interface to lock up until the file write is done. In other words, you want the application to be responsive to the user. How Would I Go About It? The solution is to launch a new thread that performs the file write, allowing the main thread to return to the user right away. Whenever the file writing thread completes, it will let the user know. In the meantime, the user is free to interact with the program for other tasks. The following examples demonstrate how to do this. Show Me the Code? The code we'll use to work with threads is in the System.Threading namespace, so you'll need the following using directive at the top of the file: using System.Threading; When you run code on a thread, the code is specified via a method. Here's the code that will execute on the thread: private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written."); } The call to Thread.Sleep(1000) delays thread execution. The parameter is specified in milliseconds, and 1000 means that this will cause the program to sleep for approximately 1 second. This method happens to be static, but that's just part of this example, which you'll see is launched from the static Main method. A thread could be instance or static. Notice that the method does not have parameters and does not have a return type. As you know, the way to refer to a method is via a delegate. There is a delegate named ThreadStart in System.Threading that refers to a method without parameters or return type, shown below: ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); I'll show you the whole program below, but the ThreadStart instance above goes in the Main method. The thread uses the ThreadStart instance, fileWriterHandlerDelegate, to specify the method to execute on the thread: Thread fileWriter = new Thread(fileWriterHandlerDelegate); As shown above, the argument type for the Thread constructor is the ThreadStart delegate type. The fileWriterHandlerDelegate argument is an instance of the ThreadStart delegate type. This creates an instance of a thread and what code will execute, but the new thread instance, fileWriter, isn't running yet. You have to explicitly start it, like this: fileWriter.Start(); Now, the code in the WriteFile method is executing on a separate thread. Meanwhile, the main thread that started the fileWriter thread continues on it's own. You have two threads running at the same time. Okay, I'm Starting to Get Glassy Eyed. How Does it All Fit Together? The example below is the whole program, pulling all the previous bits together. It's followed by its output and an explanation. using System; using System.Threading; namespace BasicThread { class Program { static void Main() { ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); Thread fileWriter = new Thread(fileWriterHandlerDelegate); Console.WriteLine("Starting FileWriter"); fileWriter.Start(); Console.WriteLine("Called FileWriter"); Console.ReadKey(); } private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written"); } } } And here's the output: Starting FileWriter Called FileWriter File Written So, Why are the Printouts Backwards? The output above corresponds to Console.Writeline statements in the program, with the second and third seemingly reversed. In a single-threaded program, "File Written" would print before "Called FileWriter". However, this is a multi-threaded (2 or more threads) program. In multi-threading, you can't make any assumptions about when a given thread will run. In this case, I added the Sleep statement to the WriteFile method to greatly increase the chances that the message from the main thread will print first. Without the Thread.Sleep, you could run this on a system with multiple cores and/or multiple processors and potentially get different results each time. Interesting Tangent but What Should I Get Out of All This? Going back to the main point, launching the WriteFile method on a separate thread made the program more responsive. The file writing logic ran for a while, but the main thread returned to the user, as demonstrated by the print out of "Called FileWriter". When the file write finished, it let the user know via another print statement. This was a very efficient use of CPU resources that made for a more pleasant user experience. Joe

Read the article

ADF Business Components

- by Arda Eralp

ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive. ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application

Read the article

Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket - (TOTD #185)

- by arungupta

The WebSocket API defines different send(xxx) methods that can be used to send text and binary data. This Tip Of The Day (TOTD) will show how to send and receive text and binary data using WebSocket. TOTD #183 explains how to get started with a WebSocket endpoint using GlassFish 4. A simple endpoint from that blog looks like: @WebSocketEndpoint("/endpoint") public class MyEndpoint { public void receiveTextMessage(String message) { . . . } } A message with the first parameter of the type String is invoked when a text payload is received. The payload of the incoming WebSocket frame is mapped to this first parameter. An optional second parameter, Session, can be specified to map to the "other end" of this conversation. For example: public void receiveTextMessage(String message, Session session) { . . . } The return type is void and that means no response is returned to the client that invoked this endpoint. A response may be returned to the client in two different ways. First, set the return type to the expected type, such as: public String receiveTextMessage(String message) { String response = . . . . . . return response; } In this case a text payload is returned back to the invoking endpoint. The second way to send a response back is to use the mapped session to send response using one of the sendXXX methods in Session, when and if needed. public void receiveTextMessage(String message, Session session) { . . . RemoteEndpoint remote = session.getRemote(); remote.sendString(...); . . . remote.sendString(...); . . . remote.sendString(...); } This shows how duplex and asynchronous communication between the two endpoints can be achieved. This can be used to define different message exchange patterns between the client and server. The WebSocket client can send the message as: websocket.send(myTextField.value); where myTextField is a text field in the web page. Binary payload in the incoming WebSocket frame can be received if ByteBuffer is used as the first parameter of the method signature. The endpoint method signature in that case would look like: public void receiveBinaryMessage(ByteBuffer message) { . . . } From the client side, the binary data can be sent using Blob, ArrayBuffer, and ArrayBufferView. Blob is a just raw data and the actual interpretation is left to the application. ArrayBuffer and ArrayBufferView are defined in the TypedArray specification and are designed to send binary data using WebSocket. In short, ArrayBuffer is a fixed-length binary buffer with no format and no mechanism for accessing its contents. These buffers are manipulated using one of the views defined by one of the subclasses of ArrayBufferView listed below: Int8Array (signed 8-bit integer or char) Uint8Array (unsigned 8-bit integer or unsigned char) Int16Array (signed 16-bit integer or short) Uint16Array (unsigned 16-bit integer or unsigned short) Int32Array (signed 32-bit integer or int) Uint32Array (unsigned 16-bit integer or unsigned int) Float32Array (signed 32-bit float or float) Float64Array (signed 64-bit float or double) WebSocket can send binary data using ArrayBuffer with a view defined by a subclass of ArrayBufferView or a subclass of ArrayBufferView itself. The WebSocket client can send the message using Blob as: blob = new Blob([myField2.value]);websocket.send(blob); where myField2 is a text field in the web page. The WebSocket client can send the message using ArrayBuffer as: var buffer = new ArrayBuffer(10);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = i;}websocket.send(buffer); A concrete implementation of receiving the binary message may look like: @WebSocketMessagepublic void echoBinary(ByteBuffer data, Session session) throws IOException { System.out.println("echoBinary: " + data); for (byte b : data.array()) { System.out.print(b); } session.getRemote().sendBytes(data);} This method is just printing the binary data for verification but you may actually be storing it in a database or converting to an image or something more meaningful. Be aware of TYRUS-51 if you are trying to send binary data from server to client using method return type. Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish TOTD #184 - Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Custom payloads using encoder/decoder Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

Read the article

Mysql query does not update row [closed]

- by Gerculy Robert

// Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // get value of id that sent from address bar /*$id=$_GET['$usrid'];*/ // Retrieve data from database $sql="SELECT * FROM user WHERE id='$usrid'"; $result=mysql_query($sql); $rows=mysql_fetch_array($result); ?> <table width="400" border="0" cellspacing="1" cellpadding="0"> <tr> <form name="form1" method="post" action="update.php"> <td> <table width="100%" border="0" cellspacing="1" cellpadding="0"> <tr> <td> </td> <td colspan="3"><strong>Update site info</strong> </td> </tr> <tr> <td align="center"> </td> <td align="center"> </td> <td align="center"> </td> <td align="center"> </td> </tr> <tr> <td align="center"> </td> <td align="center"><strong>User Name</strong></td> <td align="center"><strong>Site url</strong></td> <td align="center"><strong>Url banner</strong></td> </tr> <tr> <td> </td> <td align="center"> <input name="username" type="text" id="username" value="<? echo $rows['username']; ?>"> </td> <td align="center"> <input name="siteurl" type="text" id="siteurl" value="<? echo $rows['siteurl']; ?>" size="40"> </td> <td> <input name="urlbanner" type="text" id="urlbanner" value="<? echo $rows['urlbanner']; ?>" size="40"> </td> </tr> <tr> <td> </td> <td> <input name="id" type="hidden" id="id" value="<? echo $rows['id']; ?>"> </td> <td align="center"> <input type="submit" name="Submit" value="Submit"> </td> <td> </td> </tr> </table> </td> </form> </tr> </table> <?php // close connection mysql_close(); ?> // Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // update data in mysql database $sql="update user SET siteurl='$siteurl', username='$username', urlbanner='$urlbanner' WHERE id=$usrid"; $result=mysql_query($sql); // if successfully updated. if($result){ echo "Successful"; echo "<BR>"; echo "<a href='edit.php'>View result</a>"; } else { echo "ERROR"; } Hello, I have this two pages wich should update 3 rows. The problem is it does not update all , only 2 . I tried over 1 hour to find the problem but nothing. The row , siteurl, is not being updated at all . The table is : varchar(255) Database and session is ok. Any idea ? It's just a simple update code , should work fine :(

Read the article

Viewing the NetBeans Central Registry (Part 2)

- by Geertjan

Jens Hofschröer, who has one of the very best NetBeans Platform blogs (if you more or less understand German), and who wrote, sometime ago, the initial version of the Import Statement Organizer, as well as being the main developer of a great gear design & manufacturing tool on the NetBeans Platform in Aachen, commented on my recent blog entry "Viewing the NetBeans Central Registry", where the root Node of the Central Registry is shown in a BeanTreeView, with the words: "I wrapped that Node in a FilterNode to provide the 'position' attribute and the 'file extension'. All Children are wrapped too. Then I used an OutlineView to show these two properties. Great tool to find wrong layer entries." I asked him for the code he describes above and he sent it to me. He discussed it here in his blog, while all the code involved can be read below. The result is as follows, where you can see that the OutlineView shows information that my simple implementation (via a BeanTreeView) kept hidden: And so here is the definition of the Node. class LayerPropertiesNode extends FilterNode { public LayerPropertiesNode(Node node) { super(node, isFolder(node) ? Children.create(new LayerPropertiesFactory(node), true) : Children.LEAF); } private static boolean isFolder(Node node) { return null != node.getLookup().lookup(DataFolder.class); } @Override public String getDisplayName() { return getLookup().lookup(FileObject.class).getName(); } @Override public Image getIcon(int type) { FileObject fo = getLookup().lookup(FileObject.class); try { DataObject data = DataObject.find(fo); return data.getNodeDelegate().getIcon(type); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } return super.getIcon(type); } @Override public Image getOpenedIcon(int type) { return getIcon(type); } @Override public PropertySet[] getPropertySets() { Set set = Sheet.createPropertiesSet(); set.put(new PropertySupport.ReadOnly<Integer>( "position", Integer.class, "Position", null) { @Override public Integer getValue() throws IllegalAccessException, InvocationTargetException { FileObject fileEntry = getLookup().lookup(FileObject.class); Integer posValue = (Integer) fileEntry.getAttribute("position"); return posValue != null ? posValue : Integer.valueOf(0); } }); set.put(new PropertySupport.ReadOnly<String>( "ext", String.class, "Extension", null) { @Override public String getValue() throws IllegalAccessException, InvocationTargetException { FileObject fileEntry = getLookup().lookup(FileObject.class); return fileEntry.getExt(); } }); PropertySet[] original = super.getPropertySets(); PropertySet[] withLayer = new PropertySet[original.length + 1]; System.arraycopy(original, 0, withLayer, 0, original.length); withLayer[withLayer.length - 1] = set; return withLayer; } private static class LayerPropertiesFactory extends ChildFactory<FileObject> { private final Node context; public LayerPropertiesFactory(Node context) { this.context = context; } @Override protected boolean createKeys(List<FileObject> list) { FileObject folder = context.getLookup().lookup(FileObject.class); FileObject[] children = folder.getChildren(); List<FileObject> ordered = FileUtil.getOrder(Arrays.asList(children), false); list.addAll(ordered); return true; } @Override protected Node createNodeForKey(FileObject key) { AbstractNode node = new AbstractNode(org.openide.nodes.Children.LEAF, key.isFolder() ? Lookups.fixed(key, DataFolder.findFolder(key)) : Lookups.singleton(key)); return new LayerPropertiesNode(node); } } } Then here is the definition of the Action, which pops up a JPanel, displaying an OutlineView: @ActionID(category = "Tools", id = "de.nigjo.nb.layerview.LayerViewAction") @ActionRegistration(displayName = "#CTL_LayerViewAction") @ActionReferences({ @ActionReference(path = "Menu/Tools", position = 1450, separatorBefore = 1425) }) @Messages("CTL_LayerViewAction=Display XML Layer") public final class LayerViewAction implements ActionListener { @Override public void actionPerformed(ActionEvent e) { try { Node node = DataObject.find(FileUtil.getConfigRoot()).getNodeDelegate(); node = new LayerPropertiesNode(node); node = new FilterNode(node) { @Override public Component getCustomizer() { LayerView view = new LayerView(); view.getExplorerManager().setRootContext(this); return view; } @Override public boolean hasCustomizer() { return true; } }; NodeOperation.getDefault().customize(node); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } } private static class LayerView extends JPanel implements ExplorerManager.Provider { private final ExplorerManager em; public LayerView() { super(new BorderLayout()); em = new ExplorerManager(); OutlineView view = new OutlineView("entry"); view.addPropertyColumn("position", "Position"); view.addPropertyColumn("ext", "Extension"); add(view); } @Override public ExplorerManager getExplorerManager() { return em; } } }

Read the article

?11gR2 RAC???ASM DISK Path????

- by Liu Maclean(???)

????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH?????????, ???????????????,????!

Read the article

?11gR2 RAC???ASM DISK Path????

- by Liu Maclean(???)

????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH??????????

Read the article

?Exadata??????DBFS

- by Liu Maclean(???)

?Exadata???DBFS ??????? 1. ??fuse RPM [root@dm01db01 ~]# yum install fuse Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse x86_64 2.7.4-8.0.1.el5 el5_latest 85 k Transaction Summary ======================================================================================================================================================================== Install 1 Package(s) Upgrade 0 Package(s) Total download size: 85 k Is this ok [y/N]: y Downloading Packages: fuse-2.7.4-8.0.1.el5.x86_64.rpm | 85 kB 00:00 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse 1/1 Installed: fuse.x86_64 0:2.7.4-8.0.1.el5 [root@dm01db01 ~]# yum install fuse-libs Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse-libs.i386 0:2.7.4-8.0.1.el5 set to be updated ---> Package fuse-libs.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse-libs i386 2.7.4-8.0.1.el5 el5_latest 71 k fuse-libs x86_64 2.7.4-8.0.1.el5 el5_latest 70 k Transaction Summary ======================================================================================================================================================================== Install 2 Package(s) Upgrade 0 Package(s) Total download size: 141 k Is this ok [y/N]: y Downloading Packages: (1/2): fuse-libs-2.7.4-8.0.1.el5.x86_64.rpm | 70 kB 00:00 (2/2): fuse-libs-2.7.4-8.0.1.el5.i386.rpm | 71 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 71 kB/s | 141 kB 00:01 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse-libs 1/2 Installing : fuse-libs 2/2 Installed: fuse-libs.i386 0:2.7.4-8.0.1.el5 fuse-libs.x86_64 0:2.7.4-8.0.1.el5 Complete! [root@dm01db01 ~]# yum install fuse-devel Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse-devel.i386 0:2.7.4-8.0.1.el5 set to be updated ---> Package fuse-devel.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse-devel i386 2.7.4-8.0.1.el5 el5_latest 28 k fuse-devel x86_64 2.7.4-8.0.1.el5 el5_latest 28 k Transaction Summary ======================================================================================================================================================================== Install 2 Package(s) Upgrade 0 Package(s) Total download size: 57 k Is this ok [y/N]: y Downloading Packages: (1/2): fuse-devel-2.7.4-8.0.1.el5.x86_64.rpm | 28 kB 00:00 (2/2): fuse-devel-2.7.4-8.0.1.el5.i386.rpm | 28 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 21 kB/s | 57 kB 00:02 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse-devel 1/2 Installing : fuse-devel 2/2 Installed: fuse-devel.i386 0:2.7.4-8.0.1.el5 fuse-devel.x86_64 0:2.7.4-8.0.1.el5 Complete! 2. ?? DBFS??? ?????? cd $ORACLE_HOME/rdbms/admin sqlplus / as sysdba Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> @prvtfspi.plb Package body created. No errors. Package body created. No errors. ?????dbms_dbfs_sfs package SQL> create tablespace dbfstbs datafile size 20g; Tablespace created. SQL> create user maclean_dbfs identified by oracle; User created. SQL> grant dba to maclean_dbfs; Grant succeeded. @@!!! SQL> grant dbfs_role to maclean_dbfs; Grant succeeded. 3. ??DBFS SQL> conn maclean_dbfs/oracle Connected. SQL> @?/rdbms/admin/dbfs_create_filesystem.sql dbfstbs mac_dbfs No errors. -------- CREATE STORE: begin dbms_dbfs_sfs.createFilesystem(store_name => 'FS_MAC_DBFS', tbl_name => 'T_MAC_DBFS', tbl_tbs => 'dbfstbs', lob_tbs => 'dbfstbs', do_partition => false, partition_key => 1, do_compress => false, compression => '', do_dedup => false, do_encrypt => false); end; -------- REGISTER STORE: begin dbms_dbfs_content.registerStore(store_name=> 'FS_MAC_DBFS', provider_name => 'sample1', provider_package => 'dbms_dbfs_sfs'); end; -------- MOUNT STORE: begin dbms_dbfs_content.mountStore(store_name=>'FS_MAC_DBFS', store_mount=>'mac_dbfs'); end; -------- CHMOD STORE: declare m integer; begin m := dbms_fuse.fs_chmod('/mac_dbfs', 16895); end; No errors. 4. ??mount point [root@dm01db01 ~]# mkdir /dbfs [root@dm01db01 ~]# chown oracle:oinstall /dbfs 5. ??library path ?OS # echo "/usr/local/lib" >> /etc/ld.so.conf.d/usr_local_lib.conf 6. ?????? export ORACLE_HOME=/s01/orabase/product/11.2.0/dbhome_1 [root@dm01db01 ~]# ln -s $ORACLE_HOME/lib/libclntsh.so.11.1 /usr/local/lib/libclntsh.so.11.1 [root@dm01db01 ~]# ln -s $ORACLE_HOME/lib/libnnz11.so /usr/local/lib/libnnz11.so [root@dm01db01 ~]# ln -s /lib64/libfuse.so.2 /usr/local/lib/libfuse.so.2 7. ??ldconfig [root@dm01db01 ~]# ldconfig [root@dm01db01 ~]# 8. ??fusermount??????? [root@dm01db01 ~]# chmod +x /usr/bin/fusermount [root@dm01db01 ~]# ls -l /usr/bin/fusermount lrwxrwxrwx 1 root root 15 Sep 7 03:06 /usr/bin/fusermount -> /bin/fusermount [root@dm01db01 ~]# ls -l /bin/fusermount -rwsr-x--x 1 root fuse 27072 Oct 17 2011 /bin/fusermount 9. ???????OS dbfs_client maclean_dbfs@dm01db01:1521/orcl /dbfs 10. ????nohup + &?????mount DBFS,???????????? [oracle@dm01db01 ~]$ echo "oracle" >> dbfs_pw [oracle@dm01db01 ~]$ nohup dbfs_client maclean_dbfs@dm01db01:1521/orcl /dbfs < dbfs_pw & [oracle@dm01db01 ~]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VGExaDb-LVDbSys1 30G 15G 14G 53% / /dev/sda1 502M 30M 447M 7% /boot /dev/mapper/VGExaDb-LVDbOra1 99G 20G 75G 21% /u01 tmpfs 81G 0 81G 0% /dev/shm dbfs-maclean_dbfs@orcl:/ 20G 120K 20G 1% /dbfs [oracle@dm01db01 ~]$ mount /dev/mapper/VGExaDb-LVDbSys1 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sda1 on /boot type ext3 (rw,nodev) /dev/mapper/VGExaDb-LVDbOra1 on /u01 type ext3 (rw,nodev) tmpfs on /dev/shm type tmpfs (rw,size=82052m) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) dbfs-maclean_dbfs@orcl:/ on /dbfs type fuse (rw,nosuid,nodev,max_read=1048576,default_permissions,user=oracle) [oracle@dm01db01 ~]$ ls -l /dbfs/ total 0 drwxrwxrwx 3 root root 0 Sep 14 05:11 mac_dbfs [oracle@nas ~]$ dbfs_client --------MOUNT mode: usage: dbfs_client <db_user>@<db_server> [options] <mountpoint> db_user: Name of Database user that owns DBFS content repository filesystem(s) db_server: A valid connect string for Oracle database server (for example, hrdb_host:1521/hrservice) mountpoint: Path to mount Database File System(s) All the file systems owned by the database user will be seen at the mountpoint. DBFS options: -o direct_io Bypass the Linux page cache. Gives much better performance for large files. Programs in the file system cannot be executed with this option. This option is recommended when DBFS is used as an ETL staging area. -o wallet Run dbfs_client in background. Wallet must be configured to get credentials. -o failover dbfs_client fails over to surviving database instance with no data loss. Some performance cost on writes, especially for small files. -o allow_root Allows root access to the filesystem. This option requires setting 'user_allow_other' parameter in '/etc/fuse.conf'. -o allow_other Allows other users access to the file system. This option requires setting 'user_allow_other' parameter in '/etc/fuse.conf'. -o rw Mount the filesystem read-write. [Default] -o ro Mount the filesystem read-only. Files cannot be modified. -o trace_file=STR Tracing <filename> | 'syslog' -o trace_level=N Trace Level: 1->DEBUG, 2->INFO, 3->WARNING, 4->ERROR, 5->CRITICAL [Default: 4] -h help -V version --------COMMAND mode: Usage: dbfs_client <db_user>@<db_server> --command command [switches] [arguments] command: Command to be executed, e.g., ls, cp, mkdir, rm switches: Switches are described below for each command. arguments: File names or directory names NOTE: All database pathnames must be absolute and preceded by dbfs:/ Commands ls dbfs_client <db_user>@<db_server> --command ls [switches] target Switches: -a Show all files including those starting with '.' -l Use a long listing format. In addition to the name of each file print the file type, permissions, size, user and group information -R List subdirectories recursively cp dbfs_client <db_user>@<db_server> --command cp [switches] source destination Switches: -r, -R Copy a directory and its contents recursively into the destination directory rm dbfs_client <db_user>@<db_server> --command rm [switches] target Switches: -r, -R Removes a directory and its contents recursively mkdir dbfs_client <db_user>@<db_server> --command mkdir directory_name Examples dbfs_client ETLUser@DBConnectString --command ls -l -a dbfs:/staging_area/directory1 dbfs_client ETLUser@DBConnectString --command cp -R /tmp/1-Jan-2009-dump dbfs:/staging_area dbfs_client ETLUser@DBConnectString --command rm dbfs:/staging_area/hello.txt dbfs_client ETLUser@DBConnectString --command mkdir dbfs:/staging_area/directory2 [oracle@dm01db01 ~]$ ls -lh /tmp/largefile -rw-r--r-- 1 oracle oinstall 2.0G Sep 14 08:50 /tmp/largefile [oracle@dm01db01 ~]$ time dbfs_client maclean_dbfs@dm01db01:1521/orcl --command cp /tmp/largefile dbfs:/mac_dbfs Password: /tmp/largefile -> dbfs:/mac_dbfs/largefile real 0m11.802s user 0m0.580s sys 0m2.375s ?Exadata?????2G?????? DBFS???11s => 200MB/s

Read the article

Why do I get a connection error / timeout when using python suds to connect to Microsoft CRM?

- by Chris R

When I try to connect to an MS CRM web service using suds/python-ntlm, I am getting a timeout on requests. However, the code that I'm trying to replace -- which calls out to the cURL command line app to do the same call -- succeeds. Clearly something is different in the way that cURL is sending the command data, but I'll be damned if I know what the difference is. Below are the full details of the various calls. Anyone got any tips? Here's the code that is making the request, followed by the output. The cURL command code is below that, and its response follows. Hosts, users, and passwords have been changed to protect the innocent, of course. wsdl_url = 'https://client.service.host/MSCrmServices/2007/MetadataService.asmx?WSDL' username = r'domain\user.name' password = 'userpass' from suds.transport.https import WindowsHttpAuthenticated from suds.client import Client import logging logging.basicConfig(level=logging.INFO) logging.getLogger('suds.client').setLevel(logging.DEBUG) logging.getLogger('suds.transport').setLevel(logging.DEBUG) ntlmTransport = WindowsHttpAuthenticated(username=username, password=password) metadata_client = Client(wsdl_url, transport=ntlmTransport) request = metadata_client.factory.create('RetrieveAttributeRequest') request.MetadataId = '00000000-0000-0000-0000-000000000000' request.EntityLogicalName = 'opportunity' request.LogicalName = 'new_typeofcontact' request.RetrieveAsIfPublished = 'false' attr = metadata_client.service.Execute(request) print attr Here's the output: DEBUG:suds.client:sending to (http://client.service.host/MSCrmServices/2007/MetadataService.asmx) message: <SOAP-ENV:Envelope xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://schemas.microsoft.com/crm/2007/WebServices" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Header/> <ns0:Body> <ns1:Execute> <ns1:Request xsi:type="ns1:RetrieveAttributeRequest"> <ns1:MetadataId>00000000-0000-0000-0000-000000000000</ns1:MetadataId> <ns1:EntityLogicalName>opportunity</ns1:EntityLogicalName> <ns1:LogicalName>new_typeofcontact</ns1:LogicalName> <ns1:RetrieveAsIfPublished>false</ns1:RetrieveAsIfPublished> </ns1:Request> </ns1:Execute> </ns0:Body> </SOAP-ENV:Envelope> DEBUG:suds.client:headers = {'SOAPAction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"', 'Content-Type': 'text/xml'} DEBUG:suds.transport.http:sending: URL:http://client.service.host/MSCrmServices/2007/MetadataService.asmx HEADERS: {'SOAPAction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"', 'Content-Type': 'text/xml', 'Content-type': 'text/xml', 'Soapaction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"'} MESSAGE: <SOAP-ENV:Envelope xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://schemas.microsoft.com/crm/2007/WebServices" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Header/> <ns0:Body> <ns1:Execute> <ns1:Request xsi:type="ns1:RetrieveAttributeRequest"> <ns1:MetadataId>00000000-0000-0000-0000-000000000000</ns1:MetadataId> <ns1:EntityLogicalName>opportunity</ns1:EntityLogicalName> <ns1:LogicalName>new_typeofcontact</ns1:LogicalName> <ns1:RetrieveAsIfPublished>false</ns1:RetrieveAsIfPublished> </ns1:Request> </ns1:Execute> </ns0:Body> </SOAP-ENV:Envelope> ERROR: An unexpected error occurred while tokenizing input The following traceback may be corrupted or invalid The error message is: ('EOF in multi-line statement', (16, 0)) --------------------------------------------------------------------------- URLError Traceback (most recent call last) /Users/crose/projects/2366/crm/<ipython console> in <module>() /var/folders/nb/nbJAzxR1HbOppPcs6xO+dE+++TY/-Tmp-/python-67186icm.py in <module>() 19 request.LogicalName = 'new_typeofcontact' 20 request.RetrieveAsIfPublished = 'false' 21 ---> 22 attr = metadata_client.service.Execute(request) 23 print attr /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in __call__(self, *args, **kwargs) 537 return (500, e) 538 else: --> 539 return client.invoke(args, kwargs) 540 541 def faults(self): /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in invoke(self, args, kwargs) 596 self.method.name, timer) 597 timer.start() --> 598 result = self.send(msg) 599 timer.stop() 600 metrics.log.debug( /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in send(self, msg) 621 request = Request(location, str(msg)) 622 request.headers = self.headers() --> 623 reply = transport.send(request) 624 if retxml: 625 result = reply.message /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/https.pyc in send(self, request) 62 def send(self, request): 63 self.addcredentials(request) ---> 64 return HttpTransport.send(self, request) 65 66 def addcredentials(self, request): /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/http.pyc in send(self, request) 75 request.headers.update(u2request.headers) 76 log.debug('sending:\n%s', request) ---> 77 fp = self.u2open(u2request) 78 self.getcookies(fp, u2request) 79 result = Reply(200, fp.headers.dict, fp.read()) /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/http.pyc in u2open(self, u2request) 116 return url.open(u2request) 117 else: --> 118 return url.open(u2request, timeout=tm) 119 120 def u2opener(self): /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in open(self, fullurl, data, timeout) 381 req = meth(req) 382 --> 383 response = self._open(req, data) 384 385 # post-process response /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in _open(self, req, data) 399 protocol = req.get_type() 400 result = self._call_chain(self.handle_open, protocol, protocol + --> 401 '_open', req) 402 if result: 403 return result /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in _call_chain(self, chain, kind, meth_name, *args) 359 func = getattr(handler, meth_name) 360 --> 361 result = func(*args) 362 if result is not None: 363 return result /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in http_open(self, req) 1128 1129 def http_open(self, req): -> 1130 return self.do_open(httplib.HTTPConnection, req) 1131 1132 http_request = AbstractHTTPHandler.do_request_ /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in do_open(self, http_class, req) 1103 r = h.getresponse() 1104 except socket.error, err: # XXX what error? -> 1105 raise URLError(err) 1106 1107 # Pick apart the HTTPResponse object to get the addinfourl URLError: <urlopen error [Errno 60] Operation timed out> The cURL command is: /opt/local/bin/curl --ntlm -u "domain\user.name:userpass" -k -d @- -A "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1)" -H "Connection: Keep-Alive" -H "Content-Type: text/xml; charset=utf-8" -H "SOAPAction: http://schemas.microsoft.com/crm/2007/WebServices/Execute" https://client.service.host/MSCrmServices/2007/MetadataService.asmx The data that is piped to that cURL command: <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Header> <CrmAuthenticationToken xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <AuthenticationType xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">0</AuthenticationType> <CrmTicket xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes"></CrmTicket> <OrganizationName xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">CMIFS</OrganizationName> <CallerId xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">00000000-0000-0000-0000-000000000000</CallerId> </CrmAuthenticationToken> </soap:Header> <soap:Body> <Execute xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <Request xsi:type="RetrieveAttributeRequest"> <MetadataId>00000000-0000-0000-0000-000000000000</MetadataId> <EntityLogicalName>opportunity</EntityLogicalName> <LogicalName>new_typeofcontact</LogicalName> <RetrieveAsIfPublished>false</RetrieveAsIfPublished> </Request> </Execute> </soap:Body> </soap:Envelope> Here's the response: <?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Body> <ExecuteResponse xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <Response xsi:type="RetrieveAttributeResponse"> <AttributeMetadata xsi:type="PicklistAttributeMetadata"> <MetadataId>101346cf-a6af-4eb4-a4bf-9c3c6bbd6582</MetadataId> <SchemaName>New_TypeofContact</SchemaName> <LogicalName>new_typeofcontact</LogicalName> <EntityLogicalName>opportunity</EntityLogicalName> <AttributeType> <Value>Picklist</Value> </AttributeType>  </AttributeMetadata> </Response> </ExecuteResponse> </soap:Body> </soap:Envelope>

Read the article

getting SIGSEGV in std::_List_const_iterator<Exiv2::Exifdatum>::operator++ whilst using jni

- by HJED

Hi I'm using jni to access the exiv2 API in my Java project and I'm getting a SIGSEGV error in std::_List_const_iterator::operator++. I'm uncertain how to fix this error. I've tried using high -Xmx values as well as running on both jdk1.6.0 (server and cacao JVMs) and 1.7.0 (server JVM). gdb traceback: #0 0x00007fffa36f2363 in std::_List_const_iterator<Exiv2::Exifdatum>::operator++ (this=0x7ffff7fd3500) at /usr/include/c++/4.4/bits/stl_list.h:223 #1 0x00007fffa36f2310 in std::__distance<std::_List_const_iterator<Exiv2::Exifdatum> > (__first=..., __last=...) at /usr/include/c++/4.4/bits/stl_iterator_base_funcs.h:79 #2 0x00007fffa36f224d in std::distance<std::_List_const_iterator<Exiv2::Exifdatum> > (__first=..., __last=...) at /usr/include/c++/4.4/bits/stl_iterator_base_funcs.h:114 #3 0x00007fffa36f1f27 in std::list<Exiv2::Exifdatum, std::allocator<Exiv2::Exifdatum> >::size (this=0x7fffa4030910) at /usr/include/c++/4.4/bits/stl_list.h:805 #4 0x00007fffa36f1d50 in Exiv2::ExifData::count (this=0x7fffa4030910) at /usr/local/include/exiv2/exif.hpp:518 #5 0x00007fffa36f1d30 in Exiv2::ExifData::empty (this=0x7fffa4030910) at /usr/local/include/exiv2/exif.hpp:516 #6 0x00007fffa36f1763 in getVars (path=0x7fffa401d2f0 "/home/hjed/PC100001.JPG", env=0x6131c8, obj=0x7ffff7fd37a8) at src/main.cpp:146 #7 0x00007fffa36f19d8 in Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv (env=0x6131c8, obj=0x7ffff7fd37a8, path=0x7ffff7fd37a0, obj2=0x7ffff7fd3798) at src/main.cpp:160 #8 0x00007ffff21d9cc8 in ?? () #9 0x00000000fffffffe in ?? () #10 0x00007ffff7fd3740 in ?? () #11 0x0000000000613000 in ?? () #12 0x00007ffff7fd3738 in ?? () #13 0x00007fffaa1076e0 in ?? () #14 0x00007ffff7fd37a8 in ?? () #15 0x00007fffaa108d10 in ?? () #16 0x0000000000000000 in ?? () Java error: # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007fac11223363, pid=11905, tid=140378349111040 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 ) # Derivative: IcedTea6 1.9.2 # Distribution: Ubuntu 10.10, package 6b20-1.9.2-0ubuntu2 # Problematic frame: # C [libExiff2-binding.so+0x4363] _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x0000000000dbf000): JavaThread "main" [_thread_in_native, id=11909, stack(0x00007fac61920000,0x00007fac61a21000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000 Registers: ... Register to memory mapping: RAX=0x6c8948f0245c8948 0x6c8948f0245c8948 is pointing to unknown location RBX=0x00007fac0c042c00 0x00007fac0c042c00 is pointing to unknown location RCX=0x0000000000000000 0x0000000000000000 is pointing to unknown location RDX=0x6c8948f0245c8948 0x6c8948f0245c8948 is pointing to unknown location RSP=0x00007fac61a1f4e0 0x00007fac61a1f4e0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RBP=0x00007fac61a1f4e0 0x00007fac61a1f4e0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RSI=0x00007fac61a1f4f0 0x00007fac61a1f4f0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RDI=0x00007fac61a1f500 0x00007fac61a1f500 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R8 =0x00007fac0c054630 0x00007fac0c054630 is pointing to unknown location R9 =0x00007fac61a1f358 0x00007fac61a1f358 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R10=0x00007fac61a1f270 0x00007fac61a1f270 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R11=0x00007fac11223354 0x00007fac11223354: _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0 in /home/hjed/libExiff2-binding.so at 0x00007fac1121f000 R12=0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R13=0x00007fac13ad1be8 {method} - klass: {other class} R14=0x00007fac61a1f7a8 0x00007fac61a1f7a8 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R15=0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE Top of Stack: (sp=0x00007fac61a1f4e0) ... Instructions: (pc=0x00007fac11223363) ... Stack: [0x00007fac61920000,0x00007fac61a21000], sp=0x00007fac61a1f4e0, free space=1021k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [libExiff2-binding.so+0x4363] _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf C [libExiff2-binding.so+0x4310] _ZSt10__distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_St18input_iterator_tag+0x26 C [libExiff2-binding.so+0x424d] _ZSt8distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_+0x36 C [libExiff2-binding.so+0x3f27] _ZNKSt4listIN5Exiv29ExifdatumESaIS1_EE4sizeEv+0x33 C [libExiff2-binding.so+0x3d50] _ZNK5Exiv28ExifData5countEv+0x18 C [libExiff2-binding.so+0x3d30] _ZNK5Exiv28ExifData5emptyEv+0x18 C [libExiff2-binding.so+0x3763] _Z7getVarsPKcP7JNIEnv_P8_jobject+0x3e3 C [libExiff2-binding.so+0x39d8] Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j photo.ImageFile.<init>(Ljava/lang/String;)V+11 j test.Main.main([Ljava/lang/String;)V+67 v ~StubRoutines::call_stub V [libjvm.so+0x428698] V [libjvm.so+0x4275c8] V [libjvm.so+0x432943] V [libjvm.so+0x447f91] C [java+0x3495] JavaMain+0xd75 Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j photo.ImageFile.<init>(Ljava/lang/String;)V+11 j test.Main.main([Ljava/lang/String;)V+67 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x00007fac0c028000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=11924, stack(0x00007fac11532000,0x00007fac11633000)] 0x00007fac0c025800 JavaThread "CompilerThread1" daemon [_thread_blocked, id=11923, stack(0x00007fac11633000,0x00007fac11734000)] 0x00007fac0c022000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=11922, stack(0x00007fac11734000,0x00007fac11835000)] 0x00007fac0c01f800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11921, stack(0x00007fac11835000,0x00007fac11936000)] 0x00007fac0c001000 JavaThread "Finalizer" daemon [_thread_blocked, id=11920, stack(0x00007fac11e2d000,0x00007fac11f2e000)] 0x0000000000e36000 JavaThread "Reference Handler" daemon [_thread_blocked, id=11919, stack(0x00007fac11f2e000,0x00007fac1202f000)] =>0x0000000000dbf000 JavaThread "main" [_thread_in_native, id=11909, stack(0x00007fac61920000,0x00007fac61a21000)] Other Threads: 0x0000000000e2f800 VMThread [stack: 0x00007fac1202f000,0x00007fac12130000] [id=11918] 0x00007fac0c02b000 WatcherThread [stack: 0x00007fac11431000,0x00007fac11532000] [id=11925] ... Heap PSYoungGen total 18432K, used 632K [0x00007fac47210000, 0x00007fac486a0000, 0x00007fac5bc10000) eden space 15808K, 4% used [0x00007fac47210000,0x00007fac472ae188,0x00007fac48180000) from space 2624K, 0% used [0x00007fac48410000,0x00007fac48410000,0x00007fac486a0000) to space 2624K, 0% used [0x00007fac48180000,0x00007fac48180000,0x00007fac48410000) PSOldGen total 42240K, used 0K [0x00007fac1de10000, 0x00007fac20750000, 0x00007fac47210000) object space 42240K, 0% used [0x00007fac1de10000,0x00007fac1de10000,0x00007fac20750000) PSPermGen total 21248K, used 2831K [0x00007fac13810000, 0x00007fac14cd0000, 0x00007fac1de10000) object space 21248K, 13% used [0x00007fac13810000,0x00007fac13ad3d80,0x00007fac14cd0000) Dynamic libraries: ... VM Arguments: jvm_args: -Dfile.encoding=UTF-8 java_command: test.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=hjed LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: ... --------------- S Y S T E M --------------- OS:Ubuntu 10.10 (maverick) uname:Linux 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.27 0.31 0.30 /proc/meminfo: MemTotal: 4048200 kB MemFree: 106552 kB Buffers: 838212 kB Cached: 1172496 kB SwapCached: 0 kB Active: 1801316 kB Inactive: 1774880 kB Active(anon): 1224708 kB Inactive(anon): 355012 kB Active(file): 576608 kB Inactive(file): 1419868 kB Unevictable: 64 kB Mlocked: 64 kB SwapTotal: 7065596 kB SwapFree: 7065596 kB Dirty: 20 kB Writeback: 0 kB AnonPages: 1565608 kB Mapped: 213424 kB Shmem: 14216 kB Slab: 164812 kB SReclaimable: 102576 kB SUnreclaim: 62236 kB KernelStack: 4784 kB PageTables: 44908 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 9089696 kB Committed_AS: 3676872 kB VmallocTotal: 34359738367 kB VmallocUsed: 332952 kB VmallocChunk: 34359397884 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 48704 kB DirectMap2M: 4136960 kB CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 26 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht Memory: 4k page, physical 4048200k(106552k free), swap 7065596k(7065596k free) vm_info: OpenJDK 64-Bit Server VM (19.0-b09) for linux-amd64 JRE (1.6.0_20-b20), built on Dec 10 2010 19:45:55 by "buildd" with gcc 4.4.5 main.cpp: jobject toJava(std::auto_ptr<Exiv2::Value> v, const char * type, JNIEnv * env) { jclass stringClass; jmethodID cid; jobject result; stringClass = env->FindClass("photo/exiv2/Value"); cid = env->GetMethodID(stringClass, "<init>", "(Ljava/lang/String;Ljava/lang/Object;)V"); jvalue val; if ((strcmp(type, "String") == 0) || (strcmp(type, "String") == 0)) { val.l = env->NewStringUTF(v->toString().c_str()); } else if (strcmp(type, "Short") == 0) { val.s = v->toLong(0); } else if (strcmp(type, "Long") == 0) { val.j = v->toLong(0); } result = env->NewObject(stringClass, cid, env->NewStringUTF(v->toString().c_str()), val); return result; } void inLoop(std::auto_ptr<MetadataContainer> md, JNIEnv * env, jmethodID mid, jobject obj) { jvalue values[2]; const char* key = md->key().c_str(); values[0].l = env->NewStringUTF(key); /** md->value().toString().c_str(); const char* value = md->typeName(); values[1].l = env->NewStringUTF(value); TODO: do type conversions */ //std::cout << md->typeName() << std::endl; /** const char* type = md->value().toString().c_str(); values[1].l = env->NewStringUTF(type);*/ values[1].l = toJava(md->getValue(), md->typeName(), env); env->CallVoidMethodA(obj, mid, values); } void getVars(const char* path, JNIEnv * env, jobject obj) { //Load image Exiv2::Image::AutoPtr image = Exiv2::ImageFactory::open(path); assert(image.get() != 0); image->readMetadata(); //load method jclass cls = env->GetObjectClass(obj); jmethodID mid = env->GetMethodID(cls, "exiv2_reciveElement", "(Ljava/lang/String;Lphoto/exiv2/Value;)V"); //Load IPTC data /**loadIPTC(image, path, env, obj, mid); loadEXIF(image, path, env, obj, mid);*/ Exiv2::IptcData &iptcData = image->iptcData(); if (mid != NULL) { //is there any IPTC data AND check that method exists if (iptcData.empty()) { std::string error(path); error += ": failed loading IPTC data, there may not be any data"; } else { Exiv2::IptcData::iterator end = iptcData.end(); for (Exiv2::IptcData::iterator md = iptcData.begin(); md != end; ++md) { std::auto_ptr<MetadataContainer> meta(new MetadataContainer(md)); inLoop(meta, env, mid, obj); } } Exiv2::ExifData &exifData = image->exifData(); //is there any Exif data AND check that method exists if (exifData.empty()) { //error occurs here (main.cpp:146) std::string error(path); error += ": failed loading Exif data, there may not be any data"; } else { Exiv2::ExifData::iterator end = exifData.end(); for (Exiv2::ExifData::iterator md = exifData.begin(); md != end; ++md) { std::auto_ptr<MetadataContainer> meta(new MetadataContainer(md)); inLoop(meta, env, mid, obj); } } } else { std::string error(path); error += ": failed to load method"; } } JNIEXPORT void JNICALL Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv(JNIEnv * env, jobject obj, jstring path, jobject obj2) { const char* path2 = env->GetStringUTFChars(path, NULL); getVars(path2, env, obj); env->ReleaseStringUTFChars(path, path2); } Thanks for any help, HJED EDIT This is the output when runing the jvm with the -cacao option: run: null:/usr/local/lib Error: Directory Olympus2 with 1536 entries considered invalid; not read. LOG: [0x00007ff005376700] We received a SIGSEGV and tried to handle it, but we were LOG: [0x00007ff005376700] unable to find a Java method at: LOG: [0x00007ff005376700] LOG: [0x00007ff005376700] PC=0x00007feffe4ee67d LOG: [0x00007ff005376700] LOG: [0x00007ff005376700] Dumping the current stacktrace: at photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V(Native Method) at photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V(Exiv2MetaDataStore.java:38) at photo.exiv2.Exiv2MetaDataStore.loadData()V(Exiv2MetaDataStore.java:29) at photo.exiv2.MetaDataStore.<init>(Lphoto/ImageFile;)V(MetaDataStore.java:33) at photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V(Exiv2MetaDataStore.java:20) at photo.ImageFile.<init>(Ljava/lang/String;)V(ImageFile.java:22) at test.Main.main([Ljava/lang/String;)V(Main.java:28) LOG: [0x00007ff005376700] vm_abort: WARNING, port me to C++ and use os::abort() instead. LOG: [0x00007ff005376700] Exiting... LOG: [0x00007ff005376700] Backtrace (15 stack frames): LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x4ff54) [0x7ff004306f54] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x5ac01) [0x7ff004311c01] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x66e9a) [0x7ff00431de9a] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x76408) [0x7ff00432d408] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x79a4c) [0x7ff004330a4c] LOG: [0x00007ff005376700] /lib/libpthread.so.0(+0xfb40) [0x7ff004d53b40] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf) [0x7feffe4ee67d] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZSt10__distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_St18input_iterator_tag+0x26) [0x7feffe4ee62a] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZSt8distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_+0x36) [0x7feffe4ee567] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNKSt4listIN5Exiv29ExifdatumESaIS1_EE4sizeEv+0x33) [0x7feffe4ee22b] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNK5Exiv28ExifData5countEv+0x18) [0x7feffe4ee054] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNK5Exiv28ExifData5emptyEv+0x18) [0x7feffe4ee034] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_Z7getVarsPKcP7JNIEnv_P8_jobject+0x3d7) [0x7feffe4ed947] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b) [0x7feffe4edcdc] LOG: [0x00007ff005376700] [0x7feffe701ccd] Java Result: 134 BUILD SUCCESSFUL (total time: 0 seconds)

Read the article

javascript to reference input IDs in php loop and pass values back to same input ID

- by Smudger

I have a form which is essentially an autocomplete input box. I can get this to work perfectly for a single text box. What I need to do is create unique input boxes by using a php for loop. This will use the counter $i to give each input box a unique name and id. The problem is that the unique value of the input box needs to be passed to the javascript. this will then pass the inputted data to the external php page and return the mysql results. As mentioned I have this working for a single input box but need assistance with passing the correct values to the javascript and returning it to correct input box. existing code for working solution (first row works only, all other rows update first row input box) <html> <head> <script type="text/javascript" src="jquery.js"></script> <script type="text/javascript"> function lookup(inputString) { if(inputString.length == 0) { // Hide the suggestion box. $('#suggestions').hide(); } else { $.post("autocompleteperson.php", {queryString: ""+inputString+""}, function(data){ if(data.length >0) { $('#suggestions').show(); $('#autoSuggestionsList').html(data); } }); } } // lookup function fill(thisValue) { $('#inputString').val(thisValue); setTimeout("$('#suggestions').hide();", 200); } </script> </head> <body> <form name="form1" id="form1" action="addepartment.php" method="post"> <table> <? for ( $i = 1; $i <=10; $i++ ) { ?> <tr> <td> <? echo $i; ?></td> <td> <div> <input type="text" size="30" value="" id="inputString" onkeyup="lookup(this.value);" onblur="fill();" /> </div> <div class="suggestionsBox" id="suggestions" style="display: none;"> <img src="upArrow.png" style="position: relative; top: -12px; left: 20px;" alt="upArrow" /> <div class="suggestionList" id="autoSuggestionsList">   </div> </div> </td> </tr> <? } ?> </table> </body> </html> code for autocompleteperson.php is: $query = $db->query("SELECT fullname FROM Persons WHERE fullname LIKE '$queryString%' LIMIT 10"); if($query) { while ($result = $query ->fetch_object()) { echo '<li onClick="fill(\''.$result->fullname.'\');">'.$result->fullname.'</li>'; } } in order to get it to work for all rows, I include the counter $i in each of the file names as below: <html> <head> <script type="text/javascript" src="jquery.js"></script> <script type="text/javascript"> function lookup(inputString<? echo $i; ?>) { if(inputString<? echo $i; ?>.length == 0) { // Hide the suggestion box. $('#suggestions<? echo $i; ?>').hide(); } else { $.post("autocompleteperson.php", {queryString: ""+inputString<? echo $i; ?>+""}, function(data){ if(data.length >0) { $('#suggestions<? echo $i; ?>').show(); $('#autoSuggestionsList<? echo $i; ?>').html(data); } }); } } // lookup function fill(thisValue) { $('#inputString<? echo $i; ?>').val(thisValue); setTimeout("$('#suggestions<? echo $i; ?>').hide();", 200); } </script> </head> <body> <form name="form1" id="form1" action="addepartment.php" method="post"> <table> <? for ( $i = 1; $i <=10; $i++ ) { ?> <tr> <td> <? echo $i; ?></td> <td> <div> <input type="text" size="30" value="" id="inputString<? echo $i; ?>" onkeyup="lookup(this.value);" onblur="fill();" /> </div> <div class="suggestionsBox" id="suggestions<? echo $i; ?>" style="display: none;"> <img src="upArrow.png" style="position: relative; top: -12px; left: 20px;" alt="upArrow" /> <div class="suggestionList" id="autoSuggestionsList<? echo $i; ?>">   </div> </div> </td> </tr> <? } ?> </table> </body> </html> The autocomplete suggestion works (although always shown on first row) but when selecting the data always returns to row 1, even if input was on row 5. I have a feeling this has to do with the fill() but not sure? is it due the the autocomplete page code? or does the fill referencing ThisValue have something to do with it. example of this page (as above) can be found here Thanks for the assistance, much appreciated. UPDATE - LOLO <html> <head> <script type="text/javascript" src="jquery.js"></script> <script type="text/javascript"> function lookup(i, inputString) { if(inputValue.length == 0) { // Hide the suggestion box. $('#suggestions' + i).hide(); } else { $.post("autocompleteperson.php", {queryString: ""+inputString+""}, function(data){ if(data.length >0) { $('#suggestions' + i).show(); $('#autoSuggestionsList' + i).html(data); } }); } } // lookup function fill(i, thisValue) { $('#inputString' + i).val(thisValue); setTimeout("$('#suggestions' + i).hide();", 200); } </script> </head> <body> <form name="form1" id="form1" action="addepartment.php" method="post"> <table> <? for ( $i = 1; $i <=10; $i++ ) { ?> <tr> <td> <? echo $i; ?></td> <td> <div> <input type="text" size="30" value="" id="inputString<?php echo $i; ?>" onkeyup="lookup(this.value);" onblur="fill();" /> </div> <div class="suggestionsBox" id="suggestions<? echo $i; ?>" style="display: none;"> <img src="upArrow.png" style="position: relative; top: -12px; left: 20px;" alt="upArrow" /> <div class="suggestionList" id="autoSuggestionsList<? echo $i; ?>">   </div> </div> </td> </tr> <? } ?> </table> </body> </html> google chrome catched the following errors: first line on input, second line on loosing focus

Read the article

Cache Class compilation error using parent-child relationships and cache sql storage

- by Fred Altman

I have the global listed below that I'm trying to create a couple of cache classes using sql stoarage for: ^WHEAIPP(1,26,1)=2 ^WHEAIPP(1,26,1,1)="58074^^SMSNARE^58311" 2)="58074^59128^MPHILLIPS^59135" ^WHEAIPP(1,29,1)=2 ^WHEAIPP(1,29,1,1)="58074^^SMSNARE^58311" 2)="58074^59128^MPHILLIPS^59135" ^WHEAIPP(1,93,1)=2 ^WHEAIPP(1,93,1,1)="58884^^SSNARE^58948" 2)="58884^59128^MPHILLIPS^59135" ^WHEAIPP(1,166,1)=2 ^WHEAIPP(1,166,1,1)="58407^^SMSNARE^58420" 2)="58407^59128^MPHILLIPS^59135" ^WHEAIPP(1,324,1)=2 ^WHEAIPP(1,324,1,1)="58884^^SSNARE^58948" 2)="58884^59128^MPHILLIPS^59135" ^WHEAIPP(1,419,1)=3 ^WHEAIPP(1,419,1,1)="59707^^SSNARE^59708" 2)="59707^^MPHILLIPS^59910,58000^^^^" 3)="59707^59981^SSNARE^60117,53241^^^^" The first two subscripts of the global (Hmo and Keen) make a unique entry. The third subscript (Seq) has a property (IppLineCount) which is the number of IppLines in the fourth subscript level (Seq2). I create the class WIppProv below which is the parent class: /// <PRE> /// ============================ /// Generated Class Definition /// Table: WMCA_B_IPP_PROV /// Generated by: FXALTMAN /// Generated on: 05/21/2012 13:46:41 /// Generator: XWESTblClsGenV2 /// ---------------------------- /// </PRE> Class XFXA.MCA.WIppProv Extends (%Persistent, %XML.Adaptor) [ ClassType = persistent, Inheritance = right, ProcedureBlock, StorageStrategy = SQLMapping ] { /// .HMO Property Hmo As %Integer; /// .KEEN Property Keen As %Integer; /// .SEQ Property Seq As %String; Property IppLineCount As %Integer; Index iMaster On (Hmo, Keen, Seq) [ IdKey, Unique ]; Relationship IppLines As XFXA.MCA.WIppProvLine [ Cardinality = many, Inverse = relWIppProv ]; <Storage name="SQLMapping"> <DataLocation>^WHEAIPP</DataLocation> <ExtentSize>1000000</ExtentSize> <SQLMap name="DBMS"> <Data name="IppLineCount"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>1</Piece> </Data> <Global>^WHEAIPP</Global> <PopulationType>full</PopulationType> <Subscript name="1"> <AccessType>Sub</AccessType> <Expression>{Hmo}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="2"> <AccessType>Sub</AccessType> <Expression>{Keen}</Expression> </Subscript> <Subscript name="3"> <AccessType>Sub</AccessType> <LoopInitValue>1</LoopInitValue> <Expression>{Seq}</Expression> </Subscript> <Type>data</Type> </SQLMap> <StreamLocation>^XFXA.MCA.WIppProvS</StreamLocation> <Type>%Library.CacheSQLStorage</Type> </Storage> } This class compiles fine. Next I created the WIppProvLine class listed below and made a parent-child relationship between the two: /// Used to represent a single line of IPP data Class XFXA.MCA.WIppProvLine Extends (%Persistent, %XML.Adaptor) [ ClassType = persistent, Inheritance = right, ProcedureBlock, StorageStrategy = SQLMapping ] { /// .CLM_AMT_ALLOWED node: 0 piece: 6<BR> /// This field should be used in conjunction with the Claim Operator field to /// define a whole claim dollar amount at which a particular claim should be /// flagged with a Pend status. Property ClmAmtAllowed As %String; /// .CLM_LINE_AMT_ALLOWED node: 0 piece: 8<BR> /// This field should be used in conjunction with the Clm Line Operator field to /// define a claim line dollar amount at which a particular claim should be flagged /// with a Pend status. Property ClmLineAmtAllowed As %String; /// .CLM_LINE_OP node: 0 piece: 7<BR> /// A new Table/Column Reference that gives the SIU (Special Investigative Unit) /// the ability to look for claim line dollars above, below, or equal to a set /// amount. Property ClmLineOp As %String; /// .CLM_OP node: 0 piece: 5<BR> /// A new Table/Column Reference that gives the SIU (Special Investigative Unit) /// the ability to look for claim dollars above, below, or equal to a set amount. Property ClmOp As %String; Property EffDt As %Date; Property Hmo As %Integer; /// .IPP_REASON node: 0 piece: 10<BR> /// IPP Reason Code Property IppCode As %Integer; Property Keen As %Integer; /// .LAST_CHG_DT node: 0 piece: 4<BR> /// Last Changed Date Property LastChgDt As %Date; /// .PX_DX_CDE_FLAG node: 0 piece: 9<BR> /// A Flag to indicate whether or not Procedure Codes or Diagnosis Codes are to be /// associated with this SIU Flag Type Entry. If the Flag = Y, then control would /// jump to a new screen where the user can enter the necessary codes. Property PxDxCdeFlag As %String; Property Seq As %String; Property Seq2 As %String; Index iMaster On (Hmo, Keen, Seq, Seq2) [ IdKey, PrimaryKey, Unique ]; /// .TERM_DT node: 0 piece: 2<BR> /// Term Date Property TermDt As %Date; /// .USER_INI node: 0 piece: 3 Property UserIni As %String; Relationship relWIppProv As XFXA.MCA.WIppProv [ Cardinality = one, Inverse = IppLines ]; Index relWIppProvIndex On relWIppProv; //Index NewIndex1 On (RelWIppProv, Seq2) [ IdKey, PrimaryKey, Unique ]; <Storage name="SQLMapping"> <ExtentSize>1000000</ExtentSize> <SQLMap name="DBMS"> <ConditionalWithHostVars></ConditionalWithHostVars> <Data name="ClmAmtAllowed"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>6</Piece> </Data> <Data name="ClmLineAmtAllowed"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>8</Piece> </Data> <Data name="ClmLineOp"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>7</Piece> </Data> <Data name="ClmOp"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>5</Piece> </Data> <Data name="EffDt"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>1</Piece> </Data> <Data name="Hmo"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>11</Piece> </Data> <Data name="IppCode"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>10</Piece> </Data> <Data name="LastChgDt"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>4</Piece> </Data> <Data name="PxDxCdeFlag"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>9</Piece> </Data> <Data name="TermDt"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>2</Piece> </Data> <Data name="UserIni"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>3</Piece> </Data> <Global>^WHEAIPP</Global> <Subscript name="1"> <AccessType>Sub</AccessType> <Expression>{Hmo}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="2"> <AccessType>Sub</AccessType> <Expression>{Keen}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="3"> <AccessType>Sub</AccessType> <Expression>{Seq}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="4"> <AccessType>Sub</AccessType> <Expression>{Seq2}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Type>data</Type> </SQLMap> <StreamLocation>^XFXA.MCA.WIppProvLineS</StreamLocation> <Type>%Library.CacheSQLStorage</Type> </Storage> } When I try to compile this one I get the following error: ERROR #5502: Error compiling SQL Table 'XFXA_MCA.WIppProvLine %msg: Table XFXA_MCA.WIppProvLine has the following unmapped (not defined on the data map) fields: relWIppProv' ERROR #5030: An error occurred while compiling class XFXA.MCA.WIppProvLine Detected 1 errors during compilation in 2.745s. What am I doing wrong? Thanks in Advance, Fred

Read the article

JQuery dynamic .load - works for 1 and not for the other??

- by Alvin

UPDATE: Site is online http://qwickqual.com/memorial/create/ under "Memoria Media" - Click on "Our Videos" and it loads the list of categories click on any sub category and it goes through the process below ---------------- end edit ---------------------------------- UPDATED DESCRIPTION OF ERROR: All code is based on <li> objects being linked If I click on an <li> from the Initial page load to load: section 1: I can click on an <li> to load sub-categories section 2: I then click on an <li>, the query is made server returns section 3, section is not loaded to screen / and callback function is skipped over perhaps someone has run into a similar issue before?? ---------------- end edit ---------------------------------- I've also added comments to the code I have a jquery function that is setup to load categorized lists of thumbnails. So far the function is in use in 3 location. Each of them generates HTML using the same template under django. The function works perfectly in 2 of the 3 locations, and I"m plain stumped as to why the 3rd won't work. Below is the complete set of relevant javascript, the page load HTML for the relevant section. And 2 examples of HTML that is loaded through the script, 1 of them works, 1 of them doesn't and both are loaded into the same page load HTML Any ideas what I'm missing here? Or information I need to add to help debug? Currently posting this to a live server to interact with, been local only till now... Error: Script works properly through all levels of title="our_photos" Script loads 1st level of title="our_videos" Script will not load sub-category of title="our_videos" Example: From HTML below: Click on Script will query the server properly: GET http://localhost%3A8000/memorial/media%5Ftype/our%5Fvideos/4/ Script will not load the returned HTML into the #select_media div scopeChain: [Call, Call multi=false uri=/memorial/media_type/our_videos/, Window # 0=Call 1=Call 2=window] relative vars: label = "our_videos" wrapper = "media" uri = "/memorial/media_type/our_videos/" multi = false Javascript <script type="text/javascript"> // this piece is where I'm having trouble in the grand scheme of things // label = piece of class tag // wrapper = tag to load everything inside of // uri = base of the page to load // multi = not relevant for this piece but needed to pass on to next function function img_thumb_loader(label, wrapper, uri, multi) { if(!(wrapper)) { wrapper = label } $('.'+label+'_category').click(function () { // show the loading animation $('div#'+wrapper+'_load').show(); // get var of current object type = $(this).attr('title') || ''; // load it into the screen - this is the error // when I click on an <li> from section 2 below it will query server // (Tamper data & server see it - & return section 3 below // But will not load into the screen on return // also skips over the callback function $('#select_'+label).load(uri+type+'/', '', function() { $('div#'+wrapper+'_load').hide(); $('input.img_'+label+'_field').each(function() { img = $(this).attr('value'); $('li#img_'+label+'-'+img).css('selected_thumb'); }); img_thumb_selected(label); window[label+'_loader'](); }); }); $('.img_'+label).click(function () { if($(this).hasClass('selected_thumb')) { $(this).removeClass('selected_thumb'); id = $(this).attr('title'); $('.img_'+label+'_selected[value="'+id+'"]').remove(); } else { if(!(multi)) { previous = $('.img_'+label+'_selected').val(); $('#img_'+label+'-'+previous).removeClass('selected_thumb'); $('.img_'+label+'_selected').remove(); } $(this).addClass('selected_thumb'); id = $(this).attr('title'); $('#select_'+wrapper).after('<input class="img_'+label+'_selected" id="img_'+label+'_field-'+id+'" type="hidden" name="imgs[]" value="'+id+'" />'); } }); img_thumb_selected(label); } function img_thumb_selected(label) { $('.img_'+label+'_selected').each(function() { current = $(this).val(); if(current) { $('#img_'+label+'-'+current).addClass('selected_thumb'); } }); } function media_type() { $('.media_type').click(function () { $('#media_load').show(); type = $(this).attr('title') || ''; $('#select_media').load('/memorial/media_type/'+type+'/', '', function() { $('#select_media').wrapInner('<div id="select_'+type+'"></div>'); $('#select_media').append('<ul class="root_link"><h3><a class="load_media" onclick="return false;" href="#">Return to Select Media Type</a></h3></ul>'); load_media_type(); $('#media_load').hide(); window[type+'_loader'](); }); }); } media_type(); function load_media_type() { $('.load_media').click(function () { $('#media_load').show(); $('#select_media').load('{% url mem_media_type %}', '', function() { $('#media_load').hide(); media_type(); }); }); } function our_photos_loader() { img_thumb_loader('our_photos', 'media', '{% url mem_our_photos %}', true); } function our_videos_loader() { img_thumb_loader('our_videos', 'media', '{% url mem_our_videos %}', false); } </script> HTML - Initial Page load <fieldset> <legend>Memorial Media</legend> <div style="display: none;" id="media_load" class="loading"/> <div id="select_media"> <ul style="width: 528px;" class="initial"> <li title="your_photos" class="media_type"><div class="photo_select_upload"><h3>Your Photos</h3></div></li> <li title="our_photos" class="media_type"><div class="photo_select"><h3>Our Photos</h3></div></li> <li title="our_videos" class="media_type"><div class="video_select"><h3>Our Videos</h3></div></li> </ul> </div> </fieldset> HTML - Returned from Click on section 1 this section can make calls to subcategories and it will work <br class="clear" /> <ul class="thumb_sub_category" style="width: 352px;"> <li id="our_photos_category-29" class="our_photos_category" title="29"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/stuff_004_thumbnail.jpg);" class="thumb"><span></span></span> <p>Birds 1</p> </div> </li> <li id="our_photos_category-25" class="our_photos_category" title="25"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/dsc_0035_thumbnail.jpg);" class="thumb"><span></span></span> <p>Dogs 1</p> </div> </li> </ul> HTML - Returned from click on Section 2 Having trouble with sub-categories from this area <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul> HTML that fails to load inside - Section 3 <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul>

Read the article

DotNetOpenAuth OpenID Provider "Sequence contains more than one element"

- by Matthew Johnson

Hello, all, I'm having trouble implementing my OpenID provider with DNOA 3.4.3. Everything was going absolutely peachy until I needed AX support as well. I set AXFetchAsSregTransform in the web config, as recommended by Andrew at http://groups.google.com/group/dotnetopenid/browse_thread/thread/5629a24c0a7e8d99. Doing this caused me to get the exception "Sequence Contains More Than One Element" on my decide.aspx page, however, and I haven't been able to get past it. The following line is throwing the exception: Edit: Strangely enough, this is not the line throwing the error anymore. The SendResponse() is now triggering the exception ClaimsRequest requestedFields = ProviderEndpoint.PendingRequest.GetExtension(); ProviderEndpoint.SendResponse() Any thoughts on why this may be? Any help would be greatly appreciated! The logs leading up to the error are as follows: 2010-04-28 12:38:20,247 (GMT-7) [5] INFO DotNetOpenAuth.Messaging.Channel - Scanning incoming request for messages: https://myprovider/provider.ashx?openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.claimed_id=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.identity=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.mode=checkid_setup&openid.ns.ext1=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ext1.mode=fetch_request&openid.ext1.type.email=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ext1.type.fullname=http%3A%2F%2Faxschema.org%2FnamePerson&openid.ext1.type.language=http%3A%2F%2Faxschema.org%2Fpref%2Flanguage&openid.ext1.required=email&openid.return_to=http%3A%2F%2Fmyrelyingparty%2Flogin.jsp%3Foidreturn%3D%252Fhome&openid.assoc_handle=%7B634080802953194640%7D%7BHxjFNw==%7D%7B20%7D&openid.realm=http%3A%2F%2Fmyrelyingparty 2010-04-28 12:38:20,285 (GMT-7) [5] INFO DotNetOpenAuth.Messaging.Channel - Processing incoming CheckIdRequest (2.0) message: openid.claimed_id: http://specs.openid.net/auth/2.0/identifier_select openid.identity: http://specs.openid.net/auth/2.0/identifier_select openid.assoc_handle: {634080802953194640}{HxjFNw==}{20} openid.return_to: http://myrelyingparty/login.jsp?oidreturn=%2Fhome openid.realm: http://myrelyingparty/ openid.mode: checkid_setup openid.ns: http://specs.openid.net/auth/2.0 openid.ns.ext1: http://openid.net/srv/ax/1.0 openid.ext1.mode: fetch_request openid.ext1.type.email: http://axschema.org/contact/email openid.ext1.type.fullname: http://axschema.org/namePerson openid.ext1.type.language: http://axschema.org/pref/language openid.ext1.required: email 2010-04-28 12:38:22,773 (GMT-7) [14] INFO DotNetOpenAuth.Messaging.Channel - Scanning incoming request for messages: https://myprovider/login.aspx?ReturnUrl=%2fdecide.aspx 2010-04-28 12:38:36,167 (GMT-7) [5] INFO DotNetOpenAuth.Messaging.Channel - Scanning incoming request for messages: https://myprovider/login.aspx?ReturnUrl=%2fdecide.aspx 2010-04-28 12:38:38,147 (GMT-7) [14] ERROR DotNetOpenAuth.Messaging - Protocol error: An HTTP request to the realm URL (http://myrelyingparty/) resulted in a redirect, which is not allowed during relying party discovery. at DotNetOpenAuth.Messaging.ErrorUtilities.VerifyProtocol(Boolean condition, String message, Object[] args) at DotNetOpenAuth.OpenId.Realm.Discover(IDirectWebRequestHandler requestHandler, Boolean allowRedirects) at DotNetOpenAuth.OpenId.Realm.DiscoverReturnToEndpoints(IDirectWebRequestHandler requestHandler, Boolean allowRedirects) at DotNetOpenAuth.OpenId.Provider.HostProcessedRequest.IsReturnUrlDiscoverableCore(OpenIdProvider provider) at DotNetOpenAuth.OpenId.Provider.HostProcessedRequest.IsReturnUrlDiscoverable(OpenIdProvider provider) at OpenIdProviderWebForms.decide.Page_Load(Object src, EventArgs e) at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.decide_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 2010-04-28 12:38:38,149 (GMT-7) [14] INFO DotNetOpenAuth.Yadis - Relying party discovery at URL http://myrelyingparty/ failed. DotNetOpenAuth.Messaging.ProtocolException: An HTTP request to the realm URL (http://myrelyingparty/) resulted in a redirect, which is not allowed during relying party discovery. at DotNetOpenAuth.Messaging.ErrorUtilities.VerifyProtocol(Boolean condition, String message, Object[] args) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\Messaging\ErrorUtilities.cs:line 235 at DotNetOpenAuth.OpenId.Realm.Discover(IDirectWebRequestHandler requestHandler, Boolean allowRedirects) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Realm.cs:line 446 at DotNetOpenAuth.OpenId.Realm.DiscoverReturnToEndpoints(IDirectWebRequestHandler requestHandler, Boolean allowRedirects) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Realm.cs:line 424 at DotNetOpenAuth.OpenId.Provider.HostProcessedRequest.IsReturnUrlDiscoverableCore(OpenIdProvider provider) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Provider\HostProcessedRequest.cs:line 142 2010-04-28 12:38:42,076 (GMT-7) [8] ERROR OpenIdProviderWebForms.Global - An unhandled exception was raised. Details follow: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.InvalidOperationException: Sequence contains more than one element at System.Linq.Enumerable.SingleOrDefault[TSource](IEnumerable`1 source) at DotNetOpenAuth.OpenId.Provider.Request.GetExtension[T]() in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Provider\Request.cs:line 176 at DotNetOpenAuth.OpenId.Extensions.ExtensionsInteropHelper.ConvertSregToMatchRequest(IHostProcessedRequest request) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Extensions\ExtensionsInteropHelper.cs:line 180 at DotNetOpenAuth.OpenId.Behaviors.AXFetchAsSregTransform.DotNetOpenAuth.OpenId.Provider.IProviderBehavior.OnOutgoingResponse(IAuthenticationRequest request) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Behaviors\AXFetchAsSregTransform.cs:line 139 at DotNetOpenAuth.OpenId.Provider.OpenIdProvider.ApplyBehaviorsToResponse(IRequest request) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Provider\OpenIdProvider.cs:line 482 at DotNetOpenAuth.OpenId.Provider.OpenIdProvider.SendResponse(IRequest request) in c:\TeamCity\buildAgent\work\bf9e2ca68b75a334\src\DotNetOpenAuth\OpenId\Provider\OpenIdProvider.cs:line 325 at OpenIdProviderWebForms.decide.Yes_Click(Object sender, EventArgs e) in C:\Projects\OpenIdProviderWebForms\decide.aspx.cs:line 130 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.decide_aspx.ProcessRequest(HttpContext context) in c:\Windows\Microsoft.NET\Framework64\v2.0.50727\Temporary ASP.NET Files\root\7f580b93\b3e4d917\App_Web_tulh9ymv.1.cs:line 0 at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Read the article

Unrecognized configuration section httpHandlers in Web.Config with Microsoft Visual Web Developer 20

- by FatboyFudge

Hi all, I am in need of some help with an error message I get with Microsoft Visual Web Developer 2010 Express. I would like to create a gallery for my site so I downloaded the NotesForGallery from codeplex. I have added the reference into the project like it told me to in the installation instructions. The instructions then say Register the ThumbnailHandler in the Web.Config file (httpHandlers section): <httpHandlers> … <add verb="*" path="ThumbnailHandler.ashx" type="NotesFor.ThumbnailHandler, NotesForGallery"/> … </httpHandlers> So I open the web.config file in my solution and I add it in. When I try and start the website (clicking the play button in Web Developer) I get the error message: Unrecognized configuration section httpHandlers. The complete list of errors I get are: Message 1 Could not find schema information for the element 'httpHandlers'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 38 4 C:...\FatBoyFudge\ Message 2 Could not find schema information for the element 'add'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 8 C:...\FatBoyFudge\ Message 3 Could not find schema information for the attribute 'verb'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 12 C:...\FatBoyFudge\ Message 4 Could not find schema information for the attribute 'path'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 21 C:...\FatBoyFudge\ Message 5 Could not find schema information for the attribute 'type'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 50 C:...\FatBoyFudge\ Error 6 Unrecognized configuration section httpHandlers. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 38 Warning 7 C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Gallery.aspx: ASP.NET runtime error: Unrecognized configuration section httpHandlers. (C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\web.config line 38) C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Gallery.aspx 1 1 C:...\FatBoyFudge\ The project I created was a website if that helps any. The complete web.config is as follows: <configuration> <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <compilation debug="true" targetFramework="4.0"/> <authentication mode="Forms"> <forms loginUrl="~/Account/Login.aspx" timeout="2880"/> </authentication> <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/"/> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/"/> </providers> </profile> <roleManager enabled="false"> <providers> <clear/> <add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/"/> <add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/"/> </providers> </roleManager> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> </system.webServer> <httpHandlers> <add verb="*" path="ThumbnailHandler.ashx" type="NotesFor.ThumbnailHandler, NotesForGallery"/> </httpHandlers> </configuration> Any help you could give me would be handy because I'm not sure what I am doing wrong

Read the article

C# ASP.NET AJAX CascadingDropDown Selected value propriety problem

- by Eyla

Greetings, I have a problem to use selected value propriety of CascadingDropDown. I have 3 asp dropdown controls with ajax CascadingDropDown for each one of them. I have no problem to bind data to the 3 CascadingDropDown but my problem is to rebind CascadingDropDown. simply what I want to do is to select a record from Gridview which has the selected values for the CascadingDropDown that I want to pass then rebind the CascadingDropDown with selected value. I'm posting my code down which include: 1-ASP.NET code. 2-Code behind to handle selected record from grid view. 3- web servisice that handle binding data to the 3 CascadingDropDown. please advice how to rebind data to CascadingDropDown with selected value. by the way I used selected value proprety as showning in my code but it is not working and there is no error. Thank you, ........................ ASP.NET code ........................ <%@ Page Title="" Language="C#" MasterPageFile="~/Master.Master" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="IMAM_APPLICATION.WebForm1" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="idcontact_info" DataSourceID="ObjectDataSource1" onselectedindexchanged="GridView1_SelectedIndexChanged"> <Columns> <asp:CommandField ShowSelectButton="True" /> <asp:BoundField DataField="idcontact_info" HeaderText="idcontact_info" InsertVisible="False" ReadOnly="True" SortExpression="idcontact_info" /> <asp:BoundField DataField="Work_Field" HeaderText="Work_Field" SortExpression="Work_Field" /> <asp:BoundField DataField="Occupation" HeaderText="Occupation" SortExpression="Occupation" /> <asp:BoundField DataField="sub_Occupation" HeaderText="sub_Occupation" SortExpression="sub_Occupation" /> </Columns> </asp:GridView> <asp:Label ID="lbl" runat="server" Text="Label"></asp:Label> <asp:ObjectDataSource ID="ObjectDataSource1" runat="server" DeleteMethod="Delete" InsertMethod="Insert" OldValuesParameterFormatString="original_{0}" SelectMethod="GetData" TypeName="IMAM_APPLICATION.DSContactTableAdapters.contact_infoTableAdapter" UpdateMethod="Update"> <DeleteParameters> <asp:Parameter Name="Original_idcontact_info" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="Work_Field" Type="String" /> <asp:Parameter Name="Occupation" Type="String" /> <asp:Parameter Name="sub_Occupation" Type="String" /> <asp:Parameter Name="Original_idcontact_info" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="Work_Field" Type="String" /> <asp:Parameter Name="Occupation" Type="String" /> <asp:Parameter Name="sub_Occupation" Type="String" /> </InsertParameters> </asp:ObjectDataSource> <asp:DropDownList ID="cmbWorkField" runat="server" Style="top: 715px; left: 180px; position: absolute; height: 22px; width: 126px"> </asp:DropDownList> <asp:DropDownList runat="server" ID="cmbOccupation" Style="top: 745px; left: 180px; position: absolute; height: 22px; width: 77px"> </asp:DropDownList> <asp:DropDownList ID="cmbSubOccup" runat="server" style="position:absolute; top: 775px; left: 180px;"> </asp:DropDownList> <cc1:CascadingDropDown ID="cmbWorkField_CascadingDropDown" runat="server" TargetControlID="cmbWorkField" Category="WorkField" LoadingText="Please Wait ..." PromptText="Select Wor kField ..." ServiceMethod="GetWorkField" ServicePath="ServiceTags.asmx"> </cc1:CascadingDropDown> <cc1:CascadingDropDown ID="cmbOccupation_CascadingDropDown" runat="server" TargetControlID="cmbOccupation" Category="Occup" LoadingText="Please wait..." PromptText="Select Occup ..." ServiceMethod="GetOccup" ServicePath="ServiceTags.asmx" ParentControlID="cmbWorkField"> </cc1:CascadingDropDown> <cc1:CascadingDropDown ID="cmbSubOccup_CascadingDropDown" runat="server" Category="SubOccup" Enabled="True" LoadingText="Please Wait..." ParentControlID="cmbOccupation" PromptText="Select Sub Occup" ServiceMethod="GetSubOccup" ServicePath="ServiceTags.asmx" TargetControlID="cmbSubOccup"> </cc1:CascadingDropDown> </asp:Content> ...................................................... C# code behind ...................................................... protected void GridView1_SelectedIndexChanged(object sender, EventArgs e) { string strg = GridView1.SelectedDataKey["idcontact_info"].ToString(); int index = Convert.ToInt32(GridView1.SelectedDataKey["idcontact_info"].ToString()); //txtSearch.Text = GridView1.SelectedIndex.ToString(); // txtSearch.Text = GridView1.SelectedDataKey["idcontact_info"].ToString(); DSContactTableAdapters.contact_infoTableAdapter GetByIDAdapter = new DSContactTableAdapters.contact_infoTableAdapter(); DSContact.contact_infoDataTable ByID = GetByIDAdapter.GetDataByID(index); //DSSearch.contact_infoDataTable FirstName = FirstNameAdapter.GetDataByFirstNameList(prefixText); foreach (DataRow dr in ByID.Rows) { lbl.Text = dr["Work_Field"].ToString() + "....." + dr["Occupation"].ToString() + "....." + dr["sub_Occupation"].ToString(); cmbWorkField_CascadingDropDown.SelectedValue = dr["Work_Field"].ToString(); cmbOccupation_CascadingDropDown.SelectedValue = dr["Occupation"].ToString(); cmbSubOccup_CascadingDropDown.SelectedValue = dr["sub_Occupation"].ToString(); } } ....................................................... web Service ....................................................... [WebMethod] public CascadingDropDownNameValue[] GetWorkField(string knownCategoryValues, string category) { //dsCarsTableAdapters.CarsTableAdapter makeAdapter = new dsCarsTableAdapters.CarsTableAdapter(); //dsCars.CarsDataTable makes = makeAdapter.GetAllCars(); DSContactTableAdapters.tag_work_fieldTableAdapter GetWorkFieldAdapter = new DSContactTableAdapters.tag_work_fieldTableAdapter(); DSContact.tag_work_fieldDataTable WorkFields = GetWorkFieldAdapter.GetDataByGetWorkField(); List<CascadingDropDownNameValue> values = new List<CascadingDropDownNameValue>(); foreach (DataRow dr in WorkFields) { string Work_Field = (string)dr["work_Field_name"]; int idtag_work_field = (int)dr["idtag_work_field"]; values.Add(new CascadingDropDownNameValue(Work_Field, idtag_work_field.ToString())); } return values.ToArray(); } [WebMethod] public CascadingDropDownNameValue[] GetOccup(string knownCategoryValues, string category) { StringDictionary kv = CascadingDropDown.ParseKnownCategoryValuesString(knownCategoryValues); int idtag_work_field; if (!kv.ContainsKey("WorkField") || !Int32.TryParse(kv["WorkField"], out idtag_work_field)) { return null; } //dsCarModelsTableAdapters.CarModelsTableAdapter modelAdapter = new dsCarModelsTableAdapters.CarModelsTableAdapter(); //dsCarModels.CarModelsDataTable models = modelAdapter.GetModelsByCarId(makeId); DSContactTableAdapters.tag_OccupTableAdapter GetOccupAdapter = new DSContactTableAdapters.tag_OccupTableAdapter(); DSContact.tag_OccupDataTable Occups = GetOccupAdapter.GetByOccup_ID(idtag_work_field); // List<CascadingDropDownNameValue> values = new List<CascadingDropDownNameValue>(); foreach (DataRow dr in Occups) { values.Add(new CascadingDropDownNameValue((string)dr["Occup_Name"], dr["idtag_Occup"].ToString())); } return values.ToArray(); } [WebMethod] public CascadingDropDownNameValue[] GetSubOccup(string knownCategoryValues, string category) { StringDictionary kv = CascadingDropDown.ParseKnownCategoryValuesString(knownCategoryValues); int idtag_Occup; if (!kv.ContainsKey("Occup") || !Int32.TryParse(kv["Occup"], out idtag_Occup)) { return null; } //dsModelColorsTableAdapters.ModelColorsTableAdapter adapter = new dsModelColorsTableAdapters.ModelColorsTableAdapter(); //dsModelColors.ModelColorsDataTable colors = adapter.GetColorsByModelId(colorId); DSContactTableAdapters.tag_Sub_OccupTableAdapter GetSubOccupAdapter = new DSContactTableAdapters.tag_Sub_OccupTableAdapter(); DSContact.tag_Sub_OccupDataTable SubOccups = GetSubOccupAdapter.GetDataBy_Sub_Occup_ID(idtag_Occup); List<CascadingDropDownNameValue> values = new List<CascadingDropDownNameValue>(); foreach (DataRow dr in SubOccups) { values.Add(new CascadingDropDownNameValue((string)dr["Sub_Occup_Name"], dr["idtag_Sub_Occup"].ToString())); } return values.ToArray(); }

Read the article

how to reload jqgrid in asp.net mvc when i change dropdownlist

- by sandeep

what is wrong in this code? when i change drop down list,the grid takes old value of ddl only, not taken newely selected values why? <%--<asp:Content ID="Content2script" ContentPlaceHolderID="HeadScript" runat="server"> <script type="text/javascript"> $(function() { $("#StateId").change(function() { $('#TheForm').submit(); }); }); $(function() { $("#CityId").change(function() { $('#TheForm').submit(); }); }); $(function() { $("#HospitalName").change(function() { $('#TheForm').submit(); }); }); </script > </asp:Content>--%> <asp:Content ID="Content3" ContentPlaceHolderID="HeadContent" runat="server"> <link rel="stylesheet" type="text/css" href="/scripts/themes/coffee/grid.css" title="coffee" media="screen" /> <script src="/Scripts/jquery-1.3.2.js" type="text/javascript"></script> <script src="/Scripts/jquery.jqGrid.js" type="text/javascript"></script> <script src="/Scripts/js/jqModal.js" type="text/javascript"></script> <script src="/Scripts/js/jqDnR.js" type="text/javascript"></script> <script type="text/javascript"> var gridimgpath = '/scripts/themes/coffee/images'; var gridDataUrl = '/Claim/DynamicGridData/'; jQuery(document).ready(function() { // $("#btnSearch").click(function() { var StateId = document.getElementById('StateId').value; var CityId = document.getElementById('CityId').value; var HName = document.getElementById('HospitalName').value; // alert(CityId); // alert(StateId); // alert(HName); if (StateId > 0 && CityId == '' && HName == '') { CityId = 0; HName = 'Default'.toString(); // alert("elseif0" + HName.toString()); } else if (CityId > 0 && StateId == '') { // alert("elseif1"); alert("Please Select State..") } else if (CityId > 0 && StateId > 0 && HName == '') { // alert("elseif2"); alert(CityId); alert(StateId); HName = "Default"; } else { // alert("else"); StateId = 0; CityId = 0; HName = "Default"; } jQuery("#list").jqGrid({ url: gridDataUrl + '?StateId=' + StateId + '&CityId=' + CityId + '&hospname=' + HName, datatype: 'json', mtype: 'GET', colNames: ['Id', 'HospitalName', 'Address', 'City', 'District', 'FaxNumber', 'PhoneNumber'], colModel: [{ name: 'HospitalId', index: 'HospitalId', width: 40, align: 'left' }, { name: 'HospitalName', index: 'HospitalName', width: 40, align: 'left' }, { name: 'Address1', Address: 'Address1', width: 300 }, { name: 'CityName', index: 'CityName', width: 100 }, { name: 'DistName', index: 'DistName', width: 100 }, { name: 'FaxNo', index: 'FaxNo', width: 100 }, { name: 'ContactNo1', index: 'PhoneNumber', width: 100 } ], pager: jQuery('#pager'), rowNum: 10, rowList: [5, 10, 20, 50], // sortname: 'Id,', sortname: '1', sortorder: "asc", viewrecords: true, //multiselect: true, //multikey: "ctrlKey", // imgpath: '/scripts/themes/coffee/images', imgpath: gridimgpath, caption: 'Hospital Search', width: 700, height: 250 }); $(function() { // $("#btnSearch").click(function() { $('#CityId').change(function() { alert("kjasd"); // Set the vars whenever the date range changes and then filter the results StateId = document.getElementById('StateId').value; CityId = document.getElementById('CityId').value; HName = 'default'; setGridUrl(); }); // Set the date range textbox values $('#StateId').val(StateId.toString()); $('#CityId').val(CityId.toString()); // Set the grid json url to get the data to display setGridUrl(); }); function setGridUrl() { alert(StateId); alert(CityId); alert("hi"); var newGridDataUrl = gridDataUrl + '?StateId=' + StateId + '&CityId=' + CityId + '&hospname=' + HName; jQuery('#list').jqGrid('setGridParam', { url: newGridDataUrl }).trigger("reloadGrid"); } // }); }); </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <%--<%using (Html.BeginForm("HospitalSearch", "Claim", FormMethod.Post, new { id = "TheForm" })) --%> <table cellspacing="0" cellpadding="2" width="100%" border="0" > <tr> <td class ="Heading1"> Hospital Search</td> <td class ="Heading1" align="right" width="50%" background="../images/homebg.gif">   </td> </tr> <tr> <td colspan="2" > <% Html.RenderPartial("InsuredDetails"); %> </td> </tr> <tr> <td colspan="2"> <table width="100%"> <tr> <td class="subline" valign="middle"> State : <% =Html.DropDownList("StateId", (SelectList)ViewData["States"], "--Select--", new { @class = "ddownmenu" })%>   City : <% =Html.DropDownList("CityId", (SelectList)ViewData["Cities"], "--Select--", new { @class = "ddownmenu" })%>   Hospital Name : <% =Html.TextBox("HospitalName")%>     <input id="btnSearch" type="submit" value="Search" /> </td> </tr> </table> </td> </tr> <tr> <td align="center" colspan="2">  </td> </tr> </table> <div id="jqGridContainer"> <table id="list" class="scroll" cellpadding="0" cellspacing="0"></table> <div id="pager" class="scroll" style="text-align:center;"></div> </div> </asp:Content>

Read the article

.NET file Decryption - Bad Data

- by Jon

I am in the process of rewriting an old application. The old app stored data in a scoreboard file that was encrypted with the following code: private const String SSecretKey = @"?B?n?Mj?"; public DataTable GetScoreboardFromFile() { FileInfo f = new FileInfo(scoreBoardLocation); if (!f.Exists) { return setupNewScoreBoard(); } DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); //A 64 bit key and IV is required for this provider. //Set secret key For DES algorithm. DES.Key = ASCIIEncoding.ASCII.GetBytes(SSecretKey); //Set initialization vector. DES.IV = ASCIIEncoding.ASCII.GetBytes(SSecretKey); //Create a file stream to read the encrypted file back. FileStream fsread = new FileStream(scoreBoardLocation, FileMode.Open, FileAccess.Read); //Create a DES decryptor from the DES instance. ICryptoTransform desdecrypt = DES.CreateDecryptor(); //Create crypto stream set to read and do a //DES decryption transform on incoming bytes. CryptoStream cryptostreamDecr = new CryptoStream(fsread, desdecrypt, CryptoStreamMode.Read); DataTable dTable = new DataTable("scoreboard"); dTable.ReadXml(new StreamReader(cryptostreamDecr)); cryptostreamDecr.Close(); fsread.Close(); return dTable; } This works fine. I have copied the code into my new app so that I can create a legacy loader and convert the data into the new format. The problem is I get a "Bad Data" error: System.Security.Cryptography.CryptographicException was unhandled Message="Bad Data.\r\n" Source="mscorlib" The error fires at this line: dTable.ReadXml(new StreamReader(cryptostreamDecr)); The encrypted file was created today on the same machine with the old code. I guess that maybe the encryption / decryption process uses the application name / file or something and therefore means I can not open it. Does anyone have an idea as to: A) Be able explain why this isn't working? B) Offer a solution that would allow me to be able to open files that were created with the legacy application and be able to convert them please? Here is the whole class that deals with loading and saving the scoreboard: using System; using System.Collections.Generic; using System.Text; using System.Security.Cryptography; using System.Runtime.InteropServices; using System.IO; using System.Data; using System.Xml; using System.Threading; namespace JawBreaker { [Serializable] class ScoreBoardLoader { private Jawbreaker jawbreaker; private String sSecretKey = @"?B?n?Mj?"; private String scoreBoardFileLocation = ""; private bool keepScoreBoardUpdated = true; private int intTimer = 180000; public ScoreBoardLoader(Jawbreaker jawbreaker, String scoreBoardFileLocation) { this.jawbreaker = jawbreaker; this.scoreBoardFileLocation = scoreBoardFileLocation; } // Call this function to remove the key from memory after use for security [System.Runtime.InteropServices.DllImport("KERNEL32.DLL", EntryPoint = "RtlZeroMemory")] public static extern bool ZeroMemory(IntPtr Destination, int Length); // Function to Generate a 64 bits Key. private string GenerateKey() { // Create an instance of Symetric Algorithm. Key and IV is generated automatically. DESCryptoServiceProvider desCrypto = (DESCryptoServiceProvider)DESCryptoServiceProvider.Create(); // Use the Automatically generated key for Encryption. return ASCIIEncoding.ASCII.GetString(desCrypto.Key); } public void writeScoreboardToFile() { DataTable tempScoreBoard = getScoreboardFromFile(); //add in the new scores to the end of the file. for (int i = 0; i < jawbreaker.Scoreboard.Rows.Count; i++) { DataRow row = tempScoreBoard.NewRow(); row.ItemArray = jawbreaker.Scoreboard.Rows[i].ItemArray; tempScoreBoard.Rows.Add(row); } //before it is written back to the file make sure we update the sync info if (jawbreaker.SyncScoreboard) { //connect to webservice, login and update all the scores that have not been synced. for (int i = 0; i < tempScoreBoard.Rows.Count; i++) { try { //check to see if that row has been synced to the server if (!Boolean.Parse(tempScoreBoard.Rows[i].ItemArray[7].ToString())) { //sync info to server //update the row to say that it has been updated object[] tempArray = tempScoreBoard.Rows[i].ItemArray; tempArray[7] = true; tempScoreBoard.Rows[i].ItemArray = tempArray; tempScoreBoard.AcceptChanges(); } } catch (Exception ex) { jawbreaker.writeErrorToLog("ERROR OCCURED DURING SYNC TO SERVER UPDATE: " + ex.Message); } } } FileStream fsEncrypted = new FileStream(scoreBoardFileLocation, FileMode.Create, FileAccess.Write); DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); DES.Key = ASCIIEncoding.ASCII.GetBytes(sSecretKey); DES.IV = ASCIIEncoding.ASCII.GetBytes(sSecretKey); ICryptoTransform desencrypt = DES.CreateEncryptor(); CryptoStream cryptostream = new CryptoStream(fsEncrypted, desencrypt, CryptoStreamMode.Write); MemoryStream ms = new MemoryStream(); tempScoreBoard.WriteXml(ms, XmlWriteMode.WriteSchema); ms.Position = 0; byte[] bitarray = new byte[ms.Length]; ms.Read(bitarray, 0, bitarray.Length); cryptostream.Write(bitarray, 0, bitarray.Length); cryptostream.Close(); ms.Close(); //now the scores have been added to the file remove them from the datatable jawbreaker.Scoreboard.Rows.Clear(); } public void startPeriodicScoreboardWriteToFile() { while (keepScoreBoardUpdated) { //three minute sleep. Thread.Sleep(intTimer); writeScoreboardToFile(); } } public void stopPeriodicScoreboardWriteToFile() { keepScoreBoardUpdated = false; } public int IntTimer { get { return intTimer; } set { intTimer = value; } } public DataTable getScoreboardFromFile() { FileInfo f = new FileInfo(scoreBoardFileLocation); if (!f.Exists) { jawbreaker.writeInfoToLog("Scoreboard not there so creating new one"); return setupNewScoreBoard(); } else { DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); //A 64 bit key and IV is required for this provider. //Set secret key For DES algorithm. DES.Key = ASCIIEncoding.ASCII.GetBytes(sSecretKey); //Set initialization vector. DES.IV = ASCIIEncoding.ASCII.GetBytes(sSecretKey); //Create a file stream to read the encrypted file back. FileStream fsread = new FileStream(scoreBoardFileLocation, FileMode.Open, FileAccess.Read); //Create a DES decryptor from the DES instance. ICryptoTransform desdecrypt = DES.CreateDecryptor(); //Create crypto stream set to read and do a //DES decryption transform on incoming bytes. CryptoStream cryptostreamDecr = new CryptoStream(fsread, desdecrypt, CryptoStreamMode.Read); DataTable dTable = new DataTable("scoreboard"); dTable.ReadXml(new StreamReader(cryptostreamDecr)); cryptostreamDecr.Close(); fsread.Close(); return dTable; } } public DataTable setupNewScoreBoard() { //scoreboard info into dataset DataTable scoreboard = new DataTable("scoreboard"); scoreboard.Columns.Add(new DataColumn("playername", System.Type.GetType("System.String"))); scoreboard.Columns.Add(new DataColumn("score", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("ballnumber", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("xsize", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("ysize", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("gametype", System.Type.GetType("System.String"))); scoreboard.Columns.Add(new DataColumn("date", System.Type.GetType("System.DateTime"))); scoreboard.Columns.Add(new DataColumn("synced", System.Type.GetType("System.Boolean"))); scoreboard.AcceptChanges(); return scoreboard; } private void Run() { // For additional security Pin the key. GCHandle gch = GCHandle.Alloc(sSecretKey, GCHandleType.Pinned); // Remove the Key from memory. ZeroMemory(gch.AddrOfPinnedObject(), sSecretKey.Length * 2); gch.Free(); } } }

Search Results

Search found 40738 results on 1630 pages for 'type coercion'.

Page 260/1630 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267 | Next Page >

- by Ugur Can Yalaki

- by hangar18

- by GABMARTINEZ

- by Kelly Jones

- by rajbk

- by mbcrump

- by mbridge

- by Joe Mayo

- by Arda Eralp

- by arungupta

- by Gerculy Robert

- by Geertjan

- by Liu Maclean(???)

- by Liu Maclean(???)

- by Liu Maclean(???)

- by Chris R

- by HJED

- by Smudger

- by Fred Altman

- by Alvin

- by Matthew Johnson

- by FatboyFudge

- by Eyla

- by sandeep

- by Jon

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267 | Next Page >