Search Results

Search found 26969 results on 1079 pages for 'prevent default'.

Page 261/1079 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

  • I can't get grub menu to show up during boot

    - by wim
    After trying (and failing) to install better ATI drivers in 11.10, I've somehow lost my grub menu at boot time. The screen does change to the familiar purple colour, but instead of a list of boot options it's just blank solid colour, and then disappears quickly and boots into the default entry normally. How can I get the bootloader back? I've tried sudo update-grub and also various different combinations of resolutions and colour depths in startupmanager application with no success (640x480, 1024x768, 1600x1200, 16 bits, 8 bits, 10 second delay, 7 second delay, 2 second delay...) edit: I have already tried holding down Shift during bootup and it does not seem to change the behaviour. I get the message "GRUB Loading" in the terminal, but then the place where the grub menu normally appears I get a solid blank magenta screen for a while. Here are the contents of /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX=" vga=798 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"

    Read the article

  • Xorg crashes ever since using Nvidia dual monitors

    - by legion
    Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Unidentified network: How to configure TCP/IPv4 for Win7?

    - by Zolomon
    When I try to connect to internet I keep getting the error "Unidentified network". I've tried numerous attempts at restoring access without success. IP release, flushing DNS cache, reinstalling NIC, reactivating NIC, resetting router and so on... I've read several times that it's my default gateway that's wrong. Currently I've had automatic IP/DNS configuration set without any problems, and then it stopped working for some reason. Anyone know how I specify the IP? My subnetmask is 255.255.255.0, default gateway is 192.168.0.1 but I have no idea how to determine what IP I should set. I use a D-Link DIR-655 and other computers on the network have IPs like 192.168.0.194, next is 192.168.0.197. (I'm completely lost and am trying to cool down after two weekends of debugging filled with despair.)

    Read the article

  • Can we save image slices in sub folders in Photoshop?

    - by bobo
    I am using Photoshop CS5, by default, Photoshop saves image slices in a folder named images. This is fine but there are lots of images, saving them all in a single folder becomes quite messy. What I would like to do in Photoshop is, it allows me to specify which sub-folder a slice should go under the default images folder. For example, a website template PSD file, I would like to save image slices that appear in the header under images\header\. Maybe for the images in the footer, they should go images\footer\. Of course, I can group them manually after the slices are extracted. If possible, I would like to define them in Photoshop, so that every time the image slices are extracted, they each go to the specified sub-folder automatically. Is this possible in Photoshop?

    Read the article

  • Is this iptables NAT exploitable from the external side?

    - by Karma Fusebox
    Could you please have a short look on this simple iptables/NAT-Setup, I believe it has a fairly serious security issue (due to being too simple). On this network there is one internet-connected machine (running Debian Squeeze/2.6.32-5 with iptables 1.4.8) acting as NAT/Gateway for the handful of clients in 192.168/24. The machine has two NICs: eth0: internet-faced eth1: LAN-faced, 192.168.0.1, the default GW for 192.168/24 Routing table is two-NICs-default without manual changes: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 (externalNet) 0.0.0.0 255.255.252.0 U 0 0 0 eth0 0.0.0.0 (externalGW) 0.0.0.0 UG 0 0 0 eth0 The NAT is then enabled only and merely by these actions, there are no more iptables rules: echo 1 > /proc/sys/net/ipv4/ip_forward /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # (all iptables policies are ACCEPT) This does the job, but I miss several things here which I believe could be a security issue: there is no restriction about allowed source interfaces or source networks at all there is no firewalling part such as: (set policies to DROP) /sbin/iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT /sbin/iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT And thus, the questions of my sleepless nights are: Is this NAT-service available to anyone in the world who sets this machine as his default gateway? I'd say yes it is, because there is nothing indicating that an incoming external connection (via eth0) should be handled any different than an incoming internal connection (via eth1) as long as the output-interface is eth0 - and routing-wise that holds true for both external und internal clients that want to access the internet. So if I am right, anyone could use this machine as open proxy by having his packets NATted here. So please tell me if that's right or why it is not. As a "hotfix" I have added a "-s 192.168.0.0/24" option to the NAT-starting command. I would like to know if not using this option was indeed a security issue or just irrelevant thanks to some mechanism I am not aware of. As the policies are all ACCEPT, there is currently no restriction on forwarding eth1 to eth0 (internal to external). But what are the effective implications of currently NOT having the restriction that only RELATED and ESTABLISHED states are forwarded from eth0 to eth1 (external to internal)? In other words, should I rather change the policies to DROP and apply the two "firewalling" rules I mentioned above or is the lack of them not affecting security? Thanks for clarification!

    Read the article

  • Cannot start IIS on XP64 Professional

    - by headsling
    I have enabled the iis components for the first time on this machine, from control panel-add software-windows components, and rebooted. When I attempt to start the "Default Web Site" (which shows as 'Default Web Site (Stopped)' ) from inetmgr nothing happens.. no errors, nothing in the event log. Regmon and Filemon show no obvious errors. I've confirmed that nothing is running on port 80 and have tried changing the local port (8080, 8081 etc.,) with no effect. Further info -- I have removed the install, rebooted, added it back in, rebooted ... still not working. I have visual studio 2008, SQLServer 2008 installed.

    Read the article

  • How to add a service to the S runlevel in Debian?

    - by MasterM
    I have the following script (what it does exactly is not important): #!/bin/sh -e ### BEGIN INIT INFO # Provides: watchdog_early # Required-Start: udev # Required-Stop: # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Start watchdog early. ### END INIT INFO # Do stuff here... I insert it into the S runlevel by invoking: insserv watchdog_early The aproriate link is created in /etc/rcS.d: S04watchdog_early -> ../init.d/watchdog_early and /etc/init.d/watchdog_early is executable (has mode 755). Despite all this, it is NOT being run at boot. Why?

    Read the article

  • Proper XAML for Windows 8 Applications [closed]

    - by Jaapjan
    Traditionally, my programs do their work in the background and when I do have to make an interface for some reason, they often do not need to be complex which means I can use a simple Windows Forms or console application. But lets be honest-- Windows Forms? That is so ... ancient! Instead I have been looking at Windows 8. A new interface, different, maybe better-- but fun to give a try. Which means XAML. Now, XAML isn't all that hard in concept. Panel here, button there-- A smattering of XML. My question in short: Where can I find resources that teach me how to write good XAML code for Windows 8 applications? The long version: How do I combine XAML constructs to achieve effects? Horizontal panels with multiple sections you can scroll through with your finger, the proper way? How should you use default style resources Windows 8 might give you by default? How do I properly create a panel with user info on the right? Left aligned stackpanels with embedded dockpanels? Yes? No? Why?

    Read the article

  • How to change defaulp pdf viewer for all users in command line

    - by dodecaplex
    I'm using Debian squeeze with Gnome Desktop for all my users. I have a group of machines to set up so that all users should use xpdf as a default viewer (rather than evince). I want this set up to be done by command line (even better, using puppet). I know about xpg-mime command, but the man page says that the default command should not be used as root. I could manually tweek the /etc/gnome/defaults.list files, but I'm looking for a single command I could run to perform the setting without an editor interaction. Any idea ?

    Read the article

  • Gentoo+urxvt+terminus: How do I change font version?

    - by gaidal
    In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

    Read the article

  • More NASM with GVim

    - by MarkPearl
    Today I am bashing around with nasm again… some useful things I found… Set the current working directory of gvim to the current file path I have found setting the current working directory of gvim to the file location is very useful, especially if you are wanting to use commands in gvim to run your compiled code. It can be done by typing in the following in the command mode in gvim… cd %:p:h Once you have set it, you can use the ! to run commands you would normally run in the dos shell.. e.g. !dir Compiling code to make an executable There are three thing you need to specify to compile a basic file in name, they are… The output file format The output file name The source file name An example of this would be the following (where you have a file called temp.asm which is the source file) nasm –f bin temp.asm –o temp.com Output file format The –f specifies the output file format (in this case a binary file). To get a list of the available output file formats you can type nasm –hf (for my installation bin is the default, in which case I can omit it) Output file name This is just the name you want the compiled file to be called. For windows machines I specify .com as my default format.

    Read the article

  • How do I make virtual host DirectoryIndex file appear in the url?

    - by Bob Flemming
    I have setup a virtual host which specifies a default file to load when the URL is called. The problem I have is that I need that default DirectoryIndex file to appear in the URL. So when I go to: www.mysite.co.uk, I want www.mysite.co.uk/app.php to appear in the URL. How can I achieve this using my virtual host configuration within my apache.conf file? Here is my current code: <VirtualHost *:80> ServerName *.mysite.co.uk DocumentRoot "/var/www/html/mysite/web/" DirectoryIndex app.php </VirtualHost>

    Read the article

  • WordPress mod_rewrite redirect specific folders

    - by Ps Cjef
    As a new user, I'm not allowed to post more than two hyperlinks here. So I have added a space after every http (ignore them and read as full URLs). System: Debian Etch, Apache 2.2 I have a WordPress instance with multiple blogs. I would like to redirect some of the folders based on the year and month, while leaving other folders go to the actual locations. Example: I have archives for a few years, like 2010, 2011 and 2012: http ://mydomain.com/wordpress/myblog/2010/02 http ://mydomain.com/wordpress/myblog/2011/01 http ://mydomain.com/wordpress/myblog/2012/01 I would like to redirect all 2010 and 2011 posts to another blog with the same folder structure: http ://mydomain.com/wordpress/myotherblog/2010/02 http ://mydomain.com/wordpress/myotherblog/2011/01 and so on. I would like to have 2012 and beyond to go to the actual site (http ://mydomain.com/wordpress/myblog/2012/01). I tried mod_rewrite with the following, one rule at a time to test redirection for just one year (and to expand later for other years), and none of them worked! * RewriteEngine is already on since there are some default WordPress rewrites. * RewriteBase is set to http://mydomain.com/wordpress/ . * I put my rule before all the other default WordPress rules are processed. Didn't work solution #1 RedirectMatch 301 /myblog/2010/(.*) /myotherblog/2010/$1 Didn't work solution #2 RewriteRule /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 [R=301] Didn't work solution #3 RedirectPermanent /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 I've also tried the above rules with and without a fully qualified URL for the new location. The rewrite log, with log level set to 9, did not provide any useful information. It shows that it looks at the pattern specified against the URL (as mentioned in the rule), but finally what happens is a passthrough to http ://mydomain.com/myblog/ for all URLs or a 500 Internal Server Error. Any ideas on where I could be going wrong or any alternative solutions?

    Read the article

  • Is there application which is fakes browser and allows to choose what real to use if url provided

    - by Dzmitry Lahoda
    Is there any Application for Windows to do next think: I click url in Skype or html file in Explorer. Application is default "fake" browser, i.e. registered as default browser. Application shows several buttons. Each button represents installed or running browser. I can choose real browser, click it and specific url opened in chosen real browser . Quick search not revealed such Application. Context: I work in environment where some sites work in specific browsers. I get clickable urls from different applications. Sometimes I want to launch specific browser to use specific addin of it against url provided. I have specific portable "secured" browser I want to launch only for trusted sites.

    Read the article

  • Conflicting ip routes with local table on attaching a virtual network interface

    - by user1071840
    I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

    Read the article

  • Make mod_wsgi use python2.7.2 instead of python2.6?

    - by guron
    i am running Ubuntu 10.04.1 LTS and it came pre-packed with python2.6 but i need to replace it with python2.7.2. (The reason is simple, 2.7 has a lot of features backported from 3 ) i had installed python2.7.2 using ./configure make make altinstall the altinstall option installed it, without touching the system default version, to /usr/local/lib/python2.7 and placed the interpreter in /usr/local/bin/python2.7 Then to help mod_wsgi find python2.7 i added the following to /etc/apache2/sites-available/wsgisite WSGIPythonHome /usr/local i start apache and run a test wsgi app BUT i am greeted by python 2.6.5 and not Python2.7 Later i replaced the default python simlink to point to python 2.7 ln -f /usr/local/bin/python2.7 /usr/bin/python Now typing 'python' on the console opens python2.7 but somehow mod_wsgi still picks up python2.6 Next i tried, PATH=/usr/local/bin:$PATH export PATH then do a quick restart apache, but yet again its python2.6 !! Here is my $PATH /usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games contents of /etc/apache2/sites-available/wsgisite WSGIPythonHome /usr/local <VirtualHost *:80> ServerName wsgitest.local DocumentRoot /home/wwwhost/pydocs/wsgi <Directory /home/wwwhost/pydocs/wsgi> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /home/wwwhost/pydocs/wsgi/app.wsgi </VirtualHost> app.wsgi import sys def application(environ, start_response): status = '200 OK' output = sys.version response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Apache error.log 'import site' failed; use -v for traceback [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23235): Initializing Python. [Sun Jun 19 00:27:21 2011] [notice] Apache/2.2.14 (Ubuntu) mod_wsgi/2.8 Python/2.6.5 configured -- resuming normal operations [Sun Jun 19 00:27:21 2011] [info] Server built: Nov 18 2010 21:20:56 [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23238): Attach interpreter ''. [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23239): Attach interpreter ''. [Sun Jun 19 00:27:31 2011] [info] mod_wsgi (pid=23238): Create interpreter 'wsgitest.local|'. [Sun Jun 19 00:27:31 2011] [info] [client 192.168.1.205] mod_wsgi (pid=23238, process='', application='wsgitest.local|'): Loading WSGI script '/home/wwwhost/pydocs/$ [Sun Jun 19 00:27:50 2011] [info] mod_wsgi (pid=23239): Create interpreter 'wsgitest.local|'. Has anybody ever managed to make mod_wsgi run on a non-system default version of python ?

    Read the article

  • How do I properly center Nifty GUI elements on screen?

    - by Jason Crosby
    I am new to JME3 game engine but I know Android XML GUI layouts pretty good. I have a simple layout here and I cant figure out what is wrong. Here is my XML code: <?xml version="1.0" encoding="UTF-8"?> <nifty xmlns="http://nifty-gui.sourceforge.net/nifty-1.3.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://nifty-gui.sourceforge.net/nifty-1.3.xsd http://nifty-gui.sourceforge.net/nifty-1.3.xsd"> <useControls filename="nifty-default-controls.xml" /> <useStyles filename="nifty-default-styles.xml" /> <screen id="start" controller="com.jasoncrosby.game.farkle.gui.MenuScreenGui"> <layer id="layer" backgroundColor="#66CD00" childLayout="center"> <panel id="panel" align="center" valign="center" childLayout="center" visibleToMouse="true"> <image filename="Textures/wood_floor.png" height="95%" width="95%"/> <panel id="panel" align="center" valign="center" childLayout="center" visibleToMouse="true"> <text text="test" font="Interface/Fonts/Eraser.fnt"></text> </panel> </panel> </layer> </screen> Everything works well until I get to displaying the text. I have tried different alignments and tried moving the text into different panels but no matter what I do the text is never in the center of the screen. It's always in the upper left corner, so far I can only see the lower right part of the text. How can I center the text element in the center of the screen?

    Read the article

  • Upgraded from 11.4 to 11.10, There was an error, now the system won't initiialize

    - by Eric
    This morning the system gave me a message that my Version (11.4) was no longer supported, and I took the 'upgrade' option (- 11.10). While installing the various components I encountered a message to the effect that the there was an error and the system may have become unusable. Among the messges: E:Sup-process /usr/bin/dpkg received a segmentation fault...returned an error code (1). I was given an option to do several things, one of which seemed to mean that it would attempt to roll back to the previous version (the default), which I took. After the process ran it said the upgrade process had finished, but there were errors. I attempted to initialize a console so I could enter ubuntu-bug update-manager /var/log/dist-upgrade, per the instructions I received when I received the error message, but the console failed during initialization. I restarted the machine, and the screen has stopped with the following contents: * Starting bluetooth * Stopping save kernel messages * Starting CUPS printing spooler/server * PulseAudio configured per-user sessions saned disabled: edit /etc/default/saned $starting up Cisco VPN daemon *Starting anac(h)ronistic cron *Stopping anac(h)ronistic cron Each of these steps followed by [ OK ] What are my options? Any help appreciated!

    Read the article

  • Suggestion: ALLFILES option for RESTORE

    - by Greg Low
    The default action when performing a backup is to append to the backup file yet the default action when restoring a backup is to restore just the first file.I constantly come across customer situations where they are puzzled that they seem to have lost data after they have completed a restore. Invariably, it's just that they haven't restored all the backups contained within a single OS file. This happens most commonly with log backups but also happens when they have not restored the most recent database backup file.It is not trivial to achieve this within simple T-SQL scripts, when the number of backup files within the OS file is unknown. It really should be.I'd like to see a FILES=ALLFILES option on the RESTORE command. For RESTORE DATABASE, it should restore the most recent database backup plus any subsequent log files. For RESTORE LOG (which is the most important missing option), it should just restore all relevant log backups that are contained.If you agree, you know what to do: please vote:  https://connect.microsoft.com/SQLServer/feedback/details/769204/option-to-restore-all-backups-files-within-a-media-setAlternately, how would you write a T-SQL command to restore all log backups within a single OS file where the number of files is unknown? Would love to hear creative solutions because all the ones that I think of are pretty messy and need dynamic SQL. 

    Read the article

  • Odd SVN Checkout failures occur frequenctly on VMWare virtual machines

    - by snowballhg
    We've recently been experiencing seemingly random SVN checkout failures on our Hudson build system. Google search has failed me; I'm hoping the super user community can help me out :-) We are occasionally receiving the following SVN error when our Hudson build jobs checkout source via the Hudson Subversion plug-in (which uses svn kit): ERROR: Failed to check out http://server/svnroot/trunk org.tmatesoft.svn.core.SVNException: svn: Processing REPORT request response failed: XML document structures must start and end within the same entity. (/svnroot/!svn/vcc/default) svn: REPORT request failed on '/svnroot/!svn/vcc/default' This issue seems to only occur when checking out from our Virtual Machines (Windows XP, Fedora 9, Fedora 12) using Hudson's SVN Plug-in. Systems that use the traditional SVN client seem to work. SVN Server version: 1.6.6 Hudson version: 1.377 Hudson SVN Plugin Version: 1.17 Has anyone dealt with this issue, or have any suggestions? Thanks

    Read the article

  • Wine causes twin view to break

    - by deanvz
    I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Is The Ease Of Windows Phone Development Ruining Its Image

    - by Tim Murphy
    I was reading an article on Mashable recently by a long time iPhone user who is living solely on a Lumia 920 at the moment and giving her assessment.  One thing that struck a nerve with me was her describing the Windows Phone ecosystem as immature.  She wasn’t saying this because of the number of apps or the big names like most people do.  She means the quality of the apps in the store. This hit a nerve with me.  I find it hard to believe that the majority of app on iOS are of any higher quality than any other platform.  I believe in any ecosystem you are going to find some high end, high quality apps, but the majority by default will be from people who are trying to solve a problem but do not have the resources to have top graphics and full blown testing.  There will also be a large number that are just there trying to trick you into giving up some cash. Does any of the mean that we shouldn’t take notice of this complaint?  Of course not!  We should always strive to publish the best quality apps possible.  Don’t do things like leaving default app icons and backgrounds.  Put a little effort into your design.  You should also spend as much time as possible ensuring against crashes and giving the user the best experience possible.  Think through your apps organization and navigation.  Go the extra step of putting it into beta and letting select people use it and give you feedback before going to full release. Remember, if we want people to appreciate the Windows Phone platform we have to make sure we give them apps that they are going to enjoy using. del.icio.us Tags: Windows Phone,iPhone,iOS,Nokia,Lumia 920,Mashable

    Read the article

  • Random compositing lag

    - by user1020567
    My laptop specs: 512 mb of RAM, out of which 64 mb are shared with an integrated GPU - ATI Radeon Xpress 200 M. Intel 1,6 Ghz Celeron M single-core processor. I've spent months trying to figure out why compositing and effects sometimes lag on any distro I try. Now I've come to realise that no matter what drivers I try (the default ones work for me on pretty much any linux) compositing lag is random. When I used Ubuntu 10.10, for example, sometimes window compositing would lag and sometimes it wouldn't. The PC is able to render those effects so hardware is not the problem. It's completely random and unpredictable - sometimes when I turn on the computer the effects lag horribly and sometimes it's completely smooth. I've also checked startup items and there doesn't seem to be any unnecessary entries. I also tried building my own OS with Arch Linux and the problem persists there, therefore I can only assume that it's a driver issue of some sort. By default there are lots of drivers supplied with linux distributions. Could it be that they're in the way? The ones that I need are ati/radeon (or both? What's the difference between them?) and there seem to be a lot of others... What should I do?

    Read the article

  • Multi-screen and Nvidia GT220

    - by Bohors
    Excuse me first for my broken English I have 3 monitors on two Nvidia GT220. Unity 2D works fine after using the proprietary drivers. But no way to use compiz effects. I'm on Ubuntu 11.10 (I also tested for curiosity 12.04 for the same result) I noticed in the "System Settings" / "details" that my graphics card is not recognized (graphics card "unknown") and "View" only returns me my first screen (with the correct resolution) also in unknown. $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 05:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) xorg.conf : Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Below "Screen0" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "LG Electronics L1920P" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 0 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60_0 +0+0; nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Have you any idea? thanks

    Read the article

  • Authenticate with Django 1.5

    - by gorjuce
    I'm currently testing django 1.5 and a custom User model, but I've some problems. I've created a User class in my account app, which looks like: class User(AbstractBaseUser): email = models.EmailField() activation_key = models.CharField(max_length=255) is_active = models.BooleanField(default=False) is_admin = models.BooleanField(default=False) USERNAME_FIELD = 'email' I can correctly register a user, who is stored in my account_user table. Now, how can I log in? I've tried with: def login(request): form = AuthenticationForm() if request.method == 'POST': form = AuthenticationForm(request.POST) email = request.POST['username'] password = request.POST['password'] user = authenticate(username=email, password=password) if user is not None: if user.is_active: login(user) else: message = 'disabled account, check validation email' return render( request, 'account-login-failed.html', {'message': message} ) return render(request, 'account-login.html', {'form': form}) I can correctly register a new User My forms.py which contains my register form class RegisterForm(forms.ModelForm): """ a form to create user""" password = forms.CharField( label="Password", widget=forms.PasswordInput() ) password_confirm = forms.CharField( label="Password Repeat", widget=forms.PasswordInput() ) class Meta: model = User exclude = ('last_login', 'activation_key') def clean_password_confirm(self): password = self.cleaned_data.get("password") password_confirm = self.cleaned_data.get("password_confirm") if password and password_confirm and password != password_confirm: raise forms.ValidationError("Password don't math") return password_confirm def clean_email(self): if User.objects.filter(email__iexact=self.cleaned_data.get("email")): raise forms.ValidationError("email already exists") return self.cleaned_data['email'] def save(self): user = super(RegisterForm, self).save(commit=False) user.password = self.cleaned_data['password'] user.activation_key = generate_sha1(user.email) user.save() return user My question is: Why does authenticate give me None? I know I'm trying to authenticate() with an email as username but is that not one of the reasons to use a custom User model?

    Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >