Search Results

Search found 7987 results on 320 pages for 'profile provider'.

Page 261/320 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

  • Starting over and new to Ubuntu

    - by 2funnyyone
    We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

    Read the article

  • Open Source MariaDB, the MySQL fork to replace MySQL?

    - by Jenson
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Frankly speaking, I’ve been out of touch with the Open source world for quite some time. Until recently, after I’ve joined the new government agency, I managed to do some research while given time to learn new technologies and languages. I started reading tech blogs and tech news again (since I’m not as busy as before where I need to rush for project deadlines in and out), and I spotted this MariaDB that really attracts my attention, this is the link to ZDNet article - http://www.zdnet.com/open-source-mariadb-a-mysql-fork-challenges-oracle-7000008311/ Open-Source MariaDB, a MySQL fork, challenges Oracle Yes, you’re right, MariaDB is a MySQL fork, and as mentioned in the article, MariaDB is run by the founder of MySQL, Michael ‘Monty’ Widenius, and he claims MariaDB is faster, more secure and has more features than MySQL. I’m actually very excited to know that the code is maintained by the same dedicated core team of MySQL in the past 18 years. They even bother to form a foundation, the MariaDB Foundation, to promote MariaDB. Already, there’s a lot of open source software officially supporting MariaDB, such as  Drupal, Jelastic – Java in the cloud, Kajona, MediaWiki, phpMyAdmin, Plone, SaltOs, WordPress, and Zend Framework. But the hosting service provider might not be readily supporting MariaDB in their hosting solution. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Time will tell whether MariaDB would be the real replacement for MySQL, I’m sorry I don’t think I should use alternative here ;-) For more information, please visit MariaDB official site. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Web Services Example - Part 1: Declarative

    - by Denis T
    In this edition of the ADF Mobile blog we'll tackle part 1 of our Web Service examples. In this posting we'll take a look at using a declarative SOAP Web Service. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Defining our Web Service: First off, we should mention that this sample code is using a public web service provided free by CDYNE Corporation that provides weather forecasts by zipcode. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. Let's take a look at the web service.  We created this by using the "Web Service Data Control" from the New Gallery and using this link to this wsdl:  "http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL"   This web service has several methods but we're interested in GetCityForecastByZIP which takes a single string parameter for the zipcode and the second method, GetWeatherInformation that enumerates all possible forecast descriptions and associated image URLs.  The latter we'll use in the next edition but we included it here for completeness. Defing the Application: After adding a feature to the adfmf-feature.xml file, we added a taskflow to host the application flow.  This comprises of a home screen with a list with items for each method in the web service, "Forecast by Zip" and "Weather Info".  In this application we've also decided to hide the navigation bar since there is only one feature in the application. Forecast by Zip: The "Forecast By ZIP" option first presents the user with a screen where they can enter a zipcode and when the "Search" button is tapped, it executes the GetCityForecastByZIP method.  This is done by binding an Action binding to that method. The easiest way to accomplish this is to just drag & drop the method from the Data Control palette to the AMX page and drop it as a button and let the framework hook it up for you.  There is an inputText component on the page that is bound to a pageFlowScope variable called "zip".  This is used as the parameter to the Action binding when it is executed.  Because the actionListener attribute of the commandButton executes the Web Service each time, we ensure that the method is invoked every time the button is clicked. Weather Info: Unlike the previous method, this time instead of explictly executing the web service method we are using deferred invocation.  What this means is that we will bind to the results of the method and the framework will execute the method when it the data is required to be rendered.  We do this by simply doing a drag & drop of the results of the GetWeatherInformation to the AMX page.  When the page is rendered and the bindings are resolved the framework invokes the method.  This executes the method only when it is needed and fills the Data Control provider.  Because we never re-execute the method, you can click from Home to Weather Info and back many times and the web service is only ever invoked once. Issues and Possible Improvements: One thing you will quickly realize with this example is that the error handling is done by the framework for you. For simple examples this is fine but for real applications you'll want to customize these error messages.  With the declarative invocation of web services, this is difficult.  This is one aspect we'll address in the second installment of the web service examples where we will show you how to do programmatic invocation which allows you better error handling. Another issue you will notice with this example is that we can enumerate the weather information but there isn't an easy way to use that information to show the corresponding description and image as part of the forecast results.  We'll show you how to do this in the next example.

    Read the article

  • Fast Data - Big Data's achilles heel

    - by thegreeneman
    At OOW 2013 in Mark Hurd and Thomas Kurian's keynote, they discussed Oracle's Fast Data software solution stack and discussed a number of customers deploying Oracle's Big Data / Fast Data solutions and in particular Oracle's NoSQL Database.  Since that time, there have been a large number of request seeking clarification on how the Fast Data software stack works together to deliver on the promise of real-time Big Data solutions.   Fast Data is a software solution stack that deals with one aspect of Big Data, high velocity.   The software in the Fast Data solution stack involves 3 key pieces and their integration:  Oracle Event Processing, Oracle Coherence, Oracle NoSQL Database.   All three of these technologies address a high throughput, low latency data management requirement.   Oracle Event Processing enables continuous query to filter the Big Data fire hose, enable intelligent chained events to real-time service invocation and augments the data stream to provide Big Data enrichment. Extended SQL syntax allows the definition of sliding windows of time to allow SQL statements to look for triggers on events like breach of weighted moving average on a real-time data stream.    Oracle Coherence is a distributed, grid caching solution which is used to provide very low latency access to cached data when the data is too big to fit into a single process, so it is spread around in a grid architecture to provide memory latency speed access.  It also has some special capabilities to deploy remote behavioral execution for "near data" processing.   The Oracle NoSQL Database is designed to ingest simple key-value data at a controlled throughput rate while providing data redundancy in a cluster to facilitate highly concurrent low latency reads.  For example, when large sensor networks are generating data that need to be captured while analysts are simultaneously extracting the data using range based queries for upstream analytics.  Another example might be storing cookies from user web sessions for ultra low latency user profile management, also leveraging that data using holistic MapReduce operations with your Hadoop cluster to do segmented site analysis.  Understand how NoSQL plays a critical role in Big Data capture and enrichment while simultaneously providing a low latency and scalable data management infrastructure thru clustered, always on, parallel processing in a shared nothing architecture. Learn how easily a NoSQL cluster can be deployed to provide essential services in industry specific Fast Data solutions. See these technologies work together in a demonstration highlighting the salient features of these Fast Data enabling technologies in a location based personalization service. The question then becomes how do these things work together to deliver an end to end Fast Data solution.  The answer is that while different applications will exhibit unique requirements that may drive the need for one or the other of these technologies, often when it comes to Big Data you may need to use them together.   You may have the need for the memory latencies of the Coherence cache, but just have too much data to cache, so you use a combination of Coherence and Oracle NoSQL to handle extreme speed cache overflow and retrieval.   Here is a great reference to how these two technologies are integrated and work together.  Coherence & Oracle NoSQL Database.   On the stream processing side, it is similar as with the Coherence case.  As your sliding windows get larger, holding all the data in the stream can become difficult and out of band data may need to be offloaded into persistent storage.  OEP needs an extreme speed database like Oracle NoSQL Database to help it continue to perform for the real time loop while dealing with persistent spill in the data stream.  Here is a great resource to learn more about how OEP and Oracle NoSQL Database are integrated and work together.  OEP & Oracle NoSQL Database.

    Read the article

  • Top Three Reasons to Move to the Cloud Before Your Next Upgrade

    - by yaldahhakim
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} 1) Reduced Cost - During major upgrades, most organizations typically need to replace or invest in extra hardware and other IT resources to support the upgrade. With the Cloud, this can become more of an Op-ex discussion. The flexibility and scalability of the cloud also allows for new business solution to be set up more quickly with the ability to scale IT resources to closely map to changing business requirements. . This enables more and faster innovation because you are spending money to focus on core business initiatives instead of setting up complex environments. 2) Reduced Risk- This is especially true when you are working with a cloud provider that possesses substantial in-house expertise. Oracle Managed Cloud Services has been hosting and managing customer’s business applications for over a decade and has help hundreds of customers upgrade and adopt new technologies faster and better. Customer have access to over 15,000 Oracle experts in operation centers around the world that can work around the clock and have direct access Oracle Development to optimize our customers’ upgrade experience. 3) Reduced Downtime - Whether a customer is looking to upgrade their E-Business Suite, PeopleSoft, JD-Edwards, or Fusion applications, we’ve developed standardized best practices and tools across the technology stack to accelerate the upgrade and migration with substantially reduced timelines and risk. And because the process is repeatable, customer stay more current on the latest releases, continuously taking advantage of the newest innovations – without the headache.. By leveraging the economies and expertise of scale that belong to Oracle, you can sleep better at night knowing that your next major application upgrade is taken care of. Check out the video of this Managed Cloud Services customer to learn more about their experience.

    Read the article

  • XNA 2D Board game - trouble with the cursor

    - by Adorjan
    I just have started making a simple 2D board game using XNA, but I got stuck at the movement of the cursor. This is my problem: I have a 10x10 table on with I should use a cursor to navigate. I simply made that table with the spriteBatch.Draw() function because I couldn't do it on another way. So here is what I did with the cursor: public override void LoadContent() { ... mutato.Position = new Vector2(X, Y); //X=103, Y=107; mutato.Sebesseg = 45; ... mutato.Initialize(content.Load<Texture2D>("cursor"),mutato.Position,mutato.Sebesseg); ... } public override void HandleInput(InputState input) { if (input == null) throw new ArgumentNullException("input"); // Look up inputs for the active player profile. int playerIndex = (int)ControllingPlayer.Value; KeyboardState keyboardState = input.CurrentKeyboardStates[playerIndex]; if (input.IsPauseGame(ControllingPlayer) || gamePadDisconnected) { ScreenManager.AddScreen(new PauseMenuScreen(), ControllingPlayer); } else { // Otherwise move the player position. if (keyboardState.IsKeyDown(Keys.Down)) { Y = (int)mutato.Position.Y + mutato.Move; } if (keyboardState.IsKeyDown(Keys.Up)) { Y = (int)mutato.Position.Y - mutato.Move; } if (keyboardState.IsKeyDown(Keys.Left)) { X = (int)mutato.Position.X - mutato.Move; } if (keyboardState.IsKeyDown(Keys.Right)) { X = (int)mutato.Position.X + mutato.Move; } } } public override void Draw(GameTime gameTime) { mutato.Draw(spriteBatch); } Here's the cursor's (mutato) class: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; namespace Battleship.Components { class Cursor { public Texture2D Cursortexture; public Vector2 Position; public int Move; public void Initialize(Texture2D texture, Vector2 position,int move) { Cursortexture = texture; Position = position; Move = move; } public void Update() { } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw(Cursortexture, Position, Color.White); } } } And here is a part of the InputState class where I think I should change something: public bool IsNewKeyPress(Keys key, PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { if (controllingPlayer.HasValue) { // Read input from the specified player. playerIndex = controllingPlayer.Value; int i = (int)playerIndex; return (CurrentKeyboardStates[i].IsKeyDown(key) && LastKeyboardStates[i].IsKeyUp(key)); } } If I leave the movement operation like this it doesn't have any sense: X = (int)mutato.Position.X - mutato.Move; However if I modify it to this: X = (int)mutato.Position.X--; it moves smoothly. Instead of this I need to move the cursor by fields (45 pixels), but I don't have any idea how to manage it.

    Read the article

  • Internet of Things Becoming Reality

    - by kristin.jellison
    The Internet of Things is not just on the radar—it’s becoming a reality. A globally connected continuum of devices and objects will unleash untold possibilities for businesses and the people they touch. But the “things” are only a small part of a much larger, integrated architecture. A great example of this comes from the healthcare industry. Imagine an expectant mother who needs to watch her blood pressure. She lives in a mountain village 100 miles away from medical attention. Luckily, she can use a small “wearable” device to monitor her status and wirelessly transmit the information to a healthcare hub in her village. Now, say the healthcare hub identifies that the expectant mother’s blood pressure is dangerously high. It sends a real-time alert to the patient’s wearable device, advising her to contact her doctor. It also pushes an alert with the patient’s historical data to the doctor’s tablet PC. He inserts a smart security card into the tablet to verify his identity. This ensures that only the right people have access to the patient’s data. Then, comparing the new data with the patient’s medical history, the doctor decides she needs urgent medical attention. GPS tracking devices on ambulances in the field identify and dispatch the closest one available. An alert also goes to the closest hospital with the necessary facilities. It sends real-time information on her condition directly from the ambulance. So when she arrives, they already have a treatment plan in place to ensure she gets the right care. The Internet of Things makes a huge difference for the patient. She receives personalized and responsive healthcare. But this technology also helps the businesses involved. The healthcare provider achieves a competitive advantage in its services. The hospital benefits from cost savings through more accurate treatment and better application of services. All of this, in turn, translates into savings on insurance claims. This is an ideal scenario for the Internet of Things—when all the devices integrate easily and when the relevant organizations have all the right systems in place. But in reality, that can be difficult to achieve. Core design principles are required to make the whole system work. Open standards allow these systems to talk to each other. Integrated security protects personal, financial, commercial and regulatory information. A reliable and highly available systems infrastructure is necessary to keep these systems running 24/7. If this system were just made up of separate components, it would be prohibitively complex and expensive for almost any organization. The solution is integration, and Oracle is leading the way. We’re developing converged solutions, not just from device to datacenter, but across devices, utilizing the Java platform, and through data acquisition and management, integration, analytics, security and decision-making. The Internet of Things (IoT) requires the predictable action and interaction of a potentially endless number of components. It’s in that convergence that the true value of the Internet of Things emerges. Partners who take the comprehensive view and choose to engage with the Internet of Things as a fully integrated platform stand to gain the most from the Internet of Things’ many opportunities. To discover what else Oracle is doing to connect the world, read about Oracle’s Internet of Things Platform. Learn how you can get involved as a partner by checking out the Oracle Java Knowledge Zone. Best regards, David Hicks

    Read the article

  • Extreme Makeover, Phone Edition: Comcasts xfinity

    Mobile Makeover For many companies the first foray into Windows Phone 7 (WP7) may be in porting their existing mobile apps. It is tempting to simply transfer existing functionality, avoiding the additional design costs. Readdressing business needs and taking advantage of the WP7 platform can reduce cost and is essential to a successful re-launch. To better understand the advantage of new development lets examine a conceptual upgrade of Comcasts existing mobile app. Before Comcast has a great mobile app that provides several key features. The ability to browse the lineup using a guide, a client for Comcast email accounts, On Demand gallery, and much more. We will leverage these and build on them using some of the incredible WP7 features.   After With the proliferation of DVRs (Digital Video Recorders) and a variety of media devices (TV, PC, Mobile) content providers are challenged to find creative ways to build their brands. Every client touch point must provide both value added services as well as opportunities for marketing and up-sale; WP7 makes it easy to focus on those opportunities. The new app is an excellent vehicle for presenting Comcasts newly rebranded TV, Voice, and Internet services. These services now fly under the banner of xfinity and have been expanded to provide the best experience for Comcast customers. The Windows Phone 7 app will increase the surface area of this service revolution.   The home menu is simplified and highlights Comcasts Triple Play: Voice, TV, and Internet. The inbox has been replaced with a messages view, and message management is handled by a WP7 hub. The hub presents emails, tweets, and IMs from Comcast and other viewers the user follows on Twitter.  The popular view orders shows based on the users viewing history and current cable package. The first show Glee is both popular and participating in a conceptual co-marketing effort, so it receives prime positioning. The second spot goes to a hit show on a premium channel, in this example HBOs The Pacific, encouraging viewers to upgrade for this premium content. The remaining spots are ordered based on viewing history and popularity. Tapping the play button moves the user to the theatre where they can watch previews or full episodes streaming from Fancast. Tapping an extra presents the user with show details as well as interactive content that may be included as part of co-marketing efforts. Co-Marketing with Dynamic Content The success of Comcasts services are tied to the success of the networks and shows it purveys, making co-marketing efforts essential. In this concept FOX is co-marketing its popular show Glee. A customized panorama is updated with the latest gleeks tweets, streaming HD episodes, and extras featuring photos and video of the cast. If WP7 apps can be dynamically extended with web hosted .xap files, including sandboxed partner experiences would enable interactive features such as the Gleek Peek, in which a viewer can select a character from a panorama to view the actors profile. This dynamic inline experience has a tailored appeal to aspiring creatives and is technically possible with Windows Phone 7.   Summary The conceptual Comcast mobile app for Windows Phone 7 highlights just a few of the incredible experiences and business opportunities that can be unlocked with this latest mobile solution. It is critical that organizations recognize and take full advantage of these new capabilities. Simply porting existing mobile applications does not leverage these powerful tools; re-examining existing applications and upgrading them to Windows Phone 7 will prove essential to the continued growth and success of your brand.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Juggling with JDKs on Apple OS X

    - by Blueberry Coder
    I recently got a shiny new MacBook Pro to help me support our ADF Mobile customers. It is really a wonderful piece of hardware, although I am still adjusting to Apple's peculiar keyboard layout. Did you know, for example, that the « delete » key actually performs a « backspace »? But I disgress... As you may know, ADF Mobile development still requires JDeveloper 11gR2, which in turn runs on Java 6. On the other hand, JDeveloper 12c needs JDK 7. I wanted to install both versions, and wasn't sure how to do it.   If you remember, I explained in a previous blog entry how to install JDeveloper 11gR2 on Apple's OS X. The trick was to use the /usr/libexec/java_home command in order to invoke the proper JDK. In this case, I could have done the same thing; the two JDKs can coexist without any problems, since they install in completely different locations. But I wanted more than just installing JDeveloper. I wanted to be able to select my JDK when using the command line as well. On Windows, this is easy, since I keep all my JDKs in a central location. I simply have to move to the appropriate folder or type the folder name in the command I want to execute. Problem is, on OS X, the paths to the JDKs are... let's say convoluted.  Here is the one for Java 6. /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home The Java 7 path is not better, just different. /Library/Java/JavaVirtualMachines/jdk1.7.0_45.jdk/Contents/Home Intuitive, isn't it? Clearly, I needed something better... On OS X, the default command shell is bash. It is possible to configure the shell environment by creating a file named « .profile » in a user's home folder. Thus, I created such a file and put the following inside: export JAVA_7_HOME=$(/usr/libexec/java_home -v1.7) export JAVA_6_HOME=$(/usr/libexec/java_home -v1.6) export JAVA_HOME=$JAVA_7_HOME alias java6='export JAVA_HOME=$JAVA_6_HOME' alias java7='export JAVA_HOME=$JAVA_7_HOME'  The first two lines retrieve the current paths for Java 7 and Java 6 and store them in two environment variables. The third line marks Java 7 as the default. The last two lines create command aliases. Thus, when I type java6, the value for JAVA_HOME is set to JAVA_6_HOME, for example.  I now have an environment which works even better than the one I have on Windows, since I can change my active JDK on a whim. Here a sample, fresh from my terminal window. fdesbien-mac:~ fdesbien$ java6 fdesbien-mac:~ fdesbien$ java -version java version "1.6.0_65" Java(TM) SE Runtime Environment (build 1.6.0_65-b14-462-11M4609) Java HotSpot(TM) 64-Bit Server VM (build 20.65-b04-462, mixed mode) fdesbien-mac:~ fdesbien$ fdesbien-mac:~ fdesbien$ java7 fdesbien-mac:~ fdesbien$ java -version java version "1.7.0_45" Java(TM) SE Runtime Environment (build 1.7.0_45-b18) Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode) fdesbien-mac:~ fdesbien$ Et voilà! Maximum flexibility without downsides, just I like it. 

    Read the article

  • In the Firing Line: The impact of project and portfolio performance on the CEO

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} What are the primary measurements for rating CEO performance? For corporate boards, business analysts, investors, and the trade press the metrics they deploy are relatively binary in nature; what is being done to generate earnings, and what is being done to build and sustain high performance? As for the market, interest is primarily aroused when operational and financial performance falls outside planned commitments for the year. When organizations announce better than predicted results, they usually experience an immediate increase in share price. Likewise, poor results have an obviously negative impact on the share price and impact the role and tenure of the incumbent CEO. The danger for the CEO is that the risk of failure is ever present, ranging from manufacturing delays and supply chain issues to labor shortages and scope creep. This risk is enhanced by the involvement of secondary suppliers providing services critical to overall work schedules, and magnified further across a portfolio of programs and projects underway at any one time – and all set within a global context. All can impact planned return on investment and have an inevitable impact on the share price – the primary empirical measure of day-to-day performance. Read this complete complementary report, In the Firing Line and explore what is the direct link between the health of the portfolio and CEO performance. This report will provide an overview of the responsibility the CEO has for implementing and maintaining a culture of accountability, offer examples of some of the higher profile project failings in recent years, and detail the capabilities available to the CEO to mitigate the risks residing in their own portfolios. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Gnome-shell fails to load on 12.10

    - by Githlar
    I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

    Read the article

  • Wireless connection works but the internet is too slow to use in Ubuntu 11.04

    - by Garrin
    The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

    Read the article

  • Oracle Executive Strategy Brief: Enterprise-Grade Cloud Applications

    - by B Shashikumar
    Cloud Computing has clearly evolved into one of the dominant secular trends in the industry. Organizations are looking to the cloud to change how they buy and consume IT. And its no longer about just lower up-front costs. The cloud promises to deliver greater agility and free up resources to focus on innovation versus running and maintaining systems. But are organizations actually realizing these benefits? The full promise of cloud is not being realized by customers who entrust their business to multiple niche cloud providers. While almost 9 out of 10 companies  expect more IT agility with cloud, only 47% are actually getting it (Source: 2011 State of Cloud Survey by Symantec). These niche cloud customers have also seen the promises of lower costs, efficiency gains, improved security, and compliance go unfulfilled. Having one cloud provider for customer relationship management (CRM) and another for human capital management (HCM), and then trying to glue these proprietary systems together while integrating to a back-office financial system can add to complexity and long-term costs. Completing a business process or generating an integrated report is cumbersome, and leverages incomplete data. Why can’t niche cloud providers deliver on the full promise of cloud? It’s simple: you still need to complete business processes. You still need reporting that enables you to take action using data from multiple systems. You still have to comply with SOX and other industry regulations. These requirements don’t go away just because you deploy in the cloud. Delivering lower up-front costs by enabling customers to buy software as a service (SaaS) is the easy part. To get real value that lasts longer than your quarterly report, it’s important to realize the benefits of cloud without compromising on functionality and while having the right level of control and flexibility. This is the true promise of cloud. Oracle’s cloud strategy centers around delivering the benefits of cloud—without compromise. We uniquely empower our customers with complete solutions and choice. From the richest functionality to integrated reporting and great user experience. It’s all available in the cloud. And it works not just with other Oracle cloud applications, but with your existing Oracle and third-party systems as well. This helps protect your current investments and extend their value as you journey to the cloud. We’ve made the necessary investments not only in our applications but also in the underlying technology that makes it all run—from the platform down to the hardware and operating system. We make it all. And we’ve engineered it to work together and be highly optimized for our customers, in the cloud. With Oracle enterprise-grade cloud applications, you get the benefits of cloud plus more power, more choice, and more confidence. Read more about how you can realize the true advantage of Cloud with Oracle Enterprise-grade Cloud applications in the Oracle Executive Strategy Brief here.  You can also attend an Oracle Cloud Conference event at a city near you. Register here. 

    Read the article

  • Customer Loyalty vs. Customer Engagement: Who Cares?

    - by Jeb Dasteel-Oracle
    Have you read the recent Forbes OracleVoice blog titled Customer Loyalty is Dead. Long Live Engagement!? If you haven’t, take a look. This article prompted lots of conversation in the social realm. Many who read the article voiced their reactions to the headline and now I’m jumping in to add my view. Normal 0 false false false EN-US X-NONE X-NONE Customer loyalty is still key. It’s the effect and engagement is the cause. We at least know that to be true for our customers. We are in an age where customers are demanding to be heard. We need them to be actively involved – or engaged – as well. Greater levels of customer engagement, properly targeted, positively correlate with satisfaction. Our data has shown us this over and over. Satisfied customers are more loyal and more willing to vocalize their satisfaction through referencing, and are more likely to purchase again, all of which in turn drives incremental revenue – from the customer doing the referencing AND the customer on the receiving end of that reference. Turning this around completely, if we begin to see the level of a customer’s engagement start to wane, this is an indicator that their satisfaction, loyalty, and future revenue are likely at risk. At Oracle, we’ve put in place many programs to target, encourage, and then track engagement, allowing us to measure engagement as a determinant of loyalty. Some of these programs include our Key Accounts, solution design and architectural, Executive Sponsorship, as well as executive advisory boards. Specific programs allow us to engage specific contacts within specific customer organizations (based on role) and then systematically track their engagement activities over time, along side of tracking customer satisfaction, loyalty, referenceability, and incremental revenue contribution. Continuous measurement of engagement allows us to better understand customer views of what it means to partner with a provider and adjust program participation to better meet the needs of the partnership. We can also track across customer segments, and design new programs that are even more effective than the ones we have in place today. In case you missed any of my previous Forbes articles, I’ve included links below for easy access. Award-Winning Companies Put Customers First The Power of Peer Networks: 5 Reasons to Get (and Stay) Involved Technology At Work: Traveling In Style Customer Central: 8 Strategies for Putting Customers at the Core of Your Business Technology at Work: Five Companies Doing IT Right /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • OBI10g will be Non-Qualifying for OPN Specialisation in September 2013

    - by Mike.Hallett(at)Oracle-BI&EPM
    aboteste 12.00 Just to alert you, that OPN Specialisation is software version-specific: so as we bring out new product versions, so the specialisation crtiteria and exam needs to keep updated to the new version. Specifically for our analytics partners, be aware that your “OBI10g Specialisation” credentials will be Non-Qualifying for OPN Specialisation in September 2013. Therefore to keep your profile up to date please start now to take the latest OBI11g exams and apply to OPN to upgrade to “OBI11g Specialisation”. Find out more about the new version OBI11g Exams to update your OPN Specialisation @ OPN Exam for OBI Suite 11g is Now LIVE, and more generally the Update on BI & EPM Specializations and Knowledge Zones. aboteste 12.00 Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} And to help you pass, see the Oracle Business Intelligence Foundation Suite 11 Essentials Exam Study Guide. Also check the documents on OPN for Frequently Asked Questions for Product Version Specialization and the latest Specializations Catalog. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Using Content Analytics for More Effective Engagement

    - by Kellsey Ruppel
    Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

    Read the article

  • Profiling Startup Of VS2012 &ndash; JustTrace Profiler

    - by Alois Kraus
    JustTrace is made by Telerik which is mainly known for its collection of UI controls. The current version (2012.3.1127.0) does include a performance and memory profiler which does cost 614€ and is currently with a special offer for 306€ on sale. It does include one year of free upgrades. The uneven € numbers are calculated from the 799€ and 50% dicsount price. The UI is already in Metro style and simple to use. Multi process, attach, method recording filter are not supported. It looks like JustTrace is like Ants a Just My Code profiler. For stuff where you do not have the pdbs or you want to dig deeper into the BCL code you will not get far. After getting the profile data you get in the All Methods grid a plain list with hit count and own time. The method list for all methods is also suspiciously short which is a clear sign that you will not get far during the analysis of foreign code. But at least there is also a memory profiler included. For this I have to choose in the first window for Profiling Type “Memory Profiler” to check the memory consumption of VS.  There are some interesting number to see but I do really miss from YourKit the thread stack window. How am I supposed to get a clue when much memory is allocated and the CPU consumption is high in which places I should look? The Snapshot summary gives a rough overview which is ok for a first impression. Next is Assemblies? This gives you a list of all loaded assemblies. Not terribly useful.   The By Type view gives you exactly what it is supposed to do. You have to keep in mind that this list is filtered by the types you did check in the Assemblies list. The By Type instance list does only show types from assemblies which do not originate from Microsoft. By default mscorlib and System are not checked. That is the reason why for the first time my By Type window looked like The idea behind this feature is to show only your instances because you are ultimately responsible for the overall memory consumption. I am not sure if I do like this feature because by default it does hide too much. I do want to see at least how many strings and arrays are allocated. A simple namespace filter would also do it in my opinion. Now you can examine all string instances and look who in the object graph does keep a reference on them. That is nice but YourKit has the big plus that you can also look into the string contents.  I am also not sure how in the graph cycles are visualized and what will happen if you have thousands of objects referencing you. That's pretty much it about JustTrace. It can help the average developer to pinpoint performance and memory issues by just looking at his own code and instances. Showing them more will not help them because the sheer amount of information will overwhelm them. And you need to have a pretty good understanding how the GC and the CLR does work. When you have a performance issue at a customer machine it is sometimes very helpful to be able a bring a profiler onto the machine (no pdbs, …) and to get a full snapshot of all processes which are in the problematic use case involved. For these more advanced use cased JustTrace is certainly the wrong tool. Next: SpeedTrace

    Read the article

  • Integrating Amazon S3 in Java via NetBeans IDE

    - by Geertjan
    To continue from yesterday, let's set up a scenario that enables us to make use of this drag/drop service in NetBeans IDE: The above service is applicable to Amazon S3, an Amazon storage provider that is typically used to store large binary files. In Amazon S3, every object stored is contained in a bucket. Buckets partition the namespace of objects stored in Amazon S3. More on buckets here. Let's use the tools in NetBeans IDE to create a Java application that accesses our Amazon S3 buckets. Create a Java application named "AmazonBuckets" with a main class named "AmazonBuckets". Open the main class and then drag the above service into the main method of the class. Now, NetBeans IDE will create all the other classes and the properties file that you see in the screenshot below. The first thing to do is to open the properties file above and enter the access key and secret: access_key=SOMETHINGsecret=SOMETHINGELSE Now you're all set up. Make sure to, of course, actually have some buckets available: Then rewrite the Java class to parse the XML that is returned via the generated code: package amazonbuckets;import java.io.ByteArrayInputStream;import java.io.IOException;import javax.xml.parsers.DocumentBuilder;import javax.xml.parsers.DocumentBuilderFactory;import javax.xml.parsers.ParserConfigurationException;import org.netbeans.saas.amazon.AmazonS3Service;import org.netbeans.saas.RestResponse;import org.w3c.dom.DOMException;import org.w3c.dom.Document;import org.w3c.dom.Node;import org.w3c.dom.NodeList;import org.xml.sax.InputSource;import org.xml.sax.SAXException;public class AmazonBuckets {    public static void main(String[] args) {        try {            RestResponse result = AmazonS3Service.getBuckets();            String dataAsString = result.getDataAsString();            DocumentBuilderFactory dbFactory = DocumentBuilderFactory.newInstance();            DocumentBuilder dBuilder = dbFactory.newDocumentBuilder();            Document doc = dBuilder.parse(                    new InputSource(new ByteArrayInputStream(dataAsString.getBytes("utf-8"))));            NodeList bucketList = doc.getElementsByTagName("Bucket");            for (int i = 0; i < bucketList.getLength(); i++) {                Node node = bucketList.item(i);                System.out.println("Bucket Name: " + node.getFirstChild().getTextContent());            }        } catch (IOException | ParserConfigurationException | SAXException | DOMException ex) {        }    }}That's all. This is simpler to setup than the scenario described yesterday. Also notice that there are other Amazon S3 services you can interact with from your Java code, again after generating a heap of code after drag/drop into a Java source file: I tried the above, e.g., I created a new Amazon S3 bucket after dragging "createBucket", adding my credentials in the properties file, and then running the code that had been created. I.e., without adding a single line of code I was able to programmatically create new buckets. The above outlines a handy set of tools and techniques to use if you want to let your users store and access data in Amazon S3 buckets directly from the application you've created for them.

    Read the article

  • MySQL Server 5.6 default my.cnf and my.ini

    - by user12626240
    We've introduced a default my.cnf / my.ini file for MySQL Server that you can now see in the 5.6.8 release candidate: # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M   # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin   # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... # port = ..... # socket = ..... # server_id = .....   # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M   sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES    There is also a template file called my-default.cnf or my-default.ini that has these lines near the start: # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL.   On Linux systems, the mysql_install_db command will copy the template file to the final location, where the server will read and use the file, removing the extra three lines. On Windows, the installer will create extra settings based on the answers you gave during installation. Neither will overwrite an existing my.cnf or my.ini file. The only initially active setting here is to change the value of  sql_mode from the server default of NO_ENGINE_SUBSTITUTION to NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES. This strict mode changes warnings for some non-standard behaviour into errors. This can cause applications which rely on the non-standard things, like dates that aren't valid, to lose data. If we had just changed the server default, the new setting would affect all servers that lack an explicit sql_mode setting, including those where strict mode is harmful. So we did it in the default file instead because that will only affect new server installations. You should expect that in our next version after 5.6, the server default will include STRICT_TRANS_TABLES. Our Windows installer and some of our connectors already use STRICT_TRANS_TABLES by default. Strict has been our preferred setting for many years and it is good to see some development platforms are using it. If you need the old behaviour, just remove the STRICT_TRANS_TABLES setting. If you do this, please also ask your application provider to make it unnecessary. They can do that by setting the session sql_mode setting in their own connections, so the rest of the applications using the server don't have to have an undesirable default. We've kept this file as small as possible because we found that our old files were too big and confused people. We've also now removed the old my-huge and related example files. One key part of this is the link to the documentation, where we will provide an introduction to some key settings. We'd like to hear your feedback on settings that will benefit most users or are most important to call out for existing users. Please do that by commenting here or if you prefer by adding comments to this bug report.

    Read the article

  • Multichannel Digital Engagement: Find Out How Your Organization Measures Up

    - by Michael Snow
    This article was originally published in the September 2013 Edition of the Oracle Information InDepth Newsletter ORACLE WEBCENTER EDITION Thanks to mobile and social technologies, interactive online experiences are now commonplace. Not only that, they give consumers more choices, influence, and control than ever before. So how can you make your organization stand out? The key building blocks for delivering exceptional cross-channel digital experiences are outlined below. Also, a new assessment tool is available to help you measure your organization's ability to deliver such experiences. A clearly defined digital strategy. The customer journey is growing increasingly complex, encompassing multiple touchpoints and channels. It used to be easy to map marketing efforts to specific offline channels; for example, a direct mail piece with an offer to visit a store for a discounted purchase. Now it is more difficult to cultivate and track such clear cause-and-effect relationships. To deliver an integrated digital experience in this more complex world, organizations need a clearly defined and comprehensive digital marketing strategy that is backed up by an integrated set of software, middleware, and hardware solutions. Strong support for business agility and speed-to-market. As both IT and marketing executives know, speed-to-market and business agility are key to competitive advantage. That means marketers need solutions to support the rapid implementation of online marketing initiatives—plus the flexibility to adapt quickly to a changing marketplace. And IT needs tools with the performance, scalability, and ease of integration to support marketing efforts. Both teams benefit when business users are empowered to implement marketing initiatives on their own, with minimal IT intervention. The ability to deliver relevant, personalized content. Delivering a one-size-fits-all online customer experience is no longer acceptable. Customers expect you to know who they are, including their preferences and past relationship with your brand. That means delivering the most relevant content from the moment a visitor enters your site. To make that happen, you need a powerful rules engine so that marketers and business users can easily define site visitor segments and deliver content accordingly. That includes both implicit targeting that is based on the user’s behavior, and explicit targeting that takes a user’s profile information into account. Ideally, the rules engine can also intelligently weight recommendations when multiple segments apply to a specific customer. Support for social interactivity. With the advent of Facebook and LinkedIn, visitors expect to participate in and contribute to your web presence—and share their experience on their own social networks. That requires easy incorporation of user-generated content such as comments, ratings, reviews, polls, and blogs; seamless integration with third-party social networking sites; and support for social login, which helps to remove barriers to social participation. The ability to deliver connected, multichannel experiences that include powerful, flexible mobile capabilities. By 2015, mobile usage is projected to surpass that of PCs and other wired devices. In other words, mobile is an essential element in delivering exceptional online customer experiences. This requires the creation and management of mobile experiences that are optimized for delivery to the thousands of different devices that are in use today. Just as important, organizations must be able to easily extend their traditional web presence to the mobile channel and deliver highly personalized and relevant multichannel marketing initiatives while also managing to minimize the time and effort required to manage mobile sites. Are you curious to know how your organization measures up when it comes to delivering an engaging, multichannel digital experience? If so, take this brief, 15-question online assessment and see how your organization scores in the areas of digital strategy, digital agility, relevance and personalization, social interactivity, and multichannel experience.

    Read the article

  • ????????????????

    - by Yusuke.Yamamoto
    ????????? ????????? ????????? ????·???? ?????:Oracle???????·??????(????)??:?????????????? Pickup!:IT???????????!|????????:100???????!|???????????? ????????:?Oracle DB?????????????????????Windows?VMware?? ?????:Oracle OpenWorld Tokyo 2012|JavaOne Tokyo 2012|??????:151 ?OTN ???? ?????? ????????:???????100???????! ?????????????????Amazon????Get! ???? Oracle Technology Network, ????/????, ??IT???????·?????????????? ???????/???MySQL?????? ?????? ???????/???MySQL????? ?????????Oracle VM VirtualBox????Oracle Real Application Clusters (RAC) 11g Release 2????? ???????/??????????????????????????????? ???????/?????????????/????·????????Flashback Database with SSD? ????? ????? Oracle?????????????????????????!???????????? Oracle Enterprise Manager 12c(EM12c):????????? ~????????~ ???????????!??????·??????? Oracle Linux 5.8?????????? ???DB?????Oracle SQL Developer 3.1???????????? Oracle??????(OUI:Oracle Universal Installer)???? ????? ???? ????????? ????????????·???????? ????????????? ???????? 11gR2 ?????????? Oracle Database 11g R2 Oracle WebLogic Server 11g R1 Oracle Enterprise Manager 11g R1 ????? ????????? Oracle Database ????????????????·?? ???????/???????????????? ?????????(????????, ???, etc) ????????(???, ?????, REDO, ???·????, etc) ????·?????????????????(?????, ???, ??, ??, ??? etc) ????·?????????(??, etc) ????????????? ???????????????????·?????? ??????? ???? ????????·??|SQL Server Windows Server ??????????PL/SQL|Java|.NET|PHP ??/??? ORACLE MASTER ???? DWH(?????????)??·?? ????? ?????(SAN, NAS, SSD, etc) Oracle Database ??????? Amazon EC2 Microsoft Excel Microsoft Visual Studio MSFC/MSCS(Microsoft Cluster Service) SAP ??·??????? Oracle Database Oracle Database 11g Release 2(11gR2) Oracle Database Standard Edition ????????: Advanced Compression ?????????: Advanced Security Application Express(APEX) Automatic Storage Management(ASM) SSD???Oracle???: Database Smart Flash Cache ??????????: Data Guard/Active Data Guard Data Pump Oracle Data Provider for .NET(ODP.NET) ????: Oracle Text Partitioning(???????/?????????) DB????: Real Application Clusters(RAC) Real Application Testing Recovery Manager(RMAN) SQL*Loader|SQL*Plus|Statspack ??????|????????|???????? Database Appliance Database Firewall Exadata Database Machine SQL Developer ?????DB: TimesTen In-Memory Database Oracle Fusion Middleware Java Oracle Coherence Oracle Data Integrator(ODI) Oracle GoldenGate Oracle JRockit JVM Oracle WebLogic Server Oracle Enterprise Manager for Database|for Middleware ????????????: Oracle Application Testing Suite Oracle Linux Oracle Solaris DTrace|ZFS|???/???? Oracle VM Server for x86 ?????? ???????? ?????????Oracle???????????????·????????????????? ?????????(??·??????) OTN??????(??????) ???????(????????) Oracle University(??) ??????! ?????... ????? ?????? ????? ?????? ?????|?Sun?? ???????? OTN???????? OTN(????) ?????? ???? OTN???|???? OTN?????? ??????? ?????? ???????? ???? ???????

    Read the article

  • ?SPARC T4?????????????·???? : Netra SPARC T4-1

    - by user13138700
    ?SPARC T4???????????????·??????? Netra SPARC T4-1 ???? Netra SPARC T4-2 ?2012?1?10??????????3?15??????????????(????) ?????????? Netra SPARC T4-1 ? 4core ???( T4 ???????? 4core ???)(*)???????????????????????????(*)( Netra SPARC T4-1 ?????? 4core ???? 8core ????????) ??? prtdiag ????? pginfo ??????????????? 8????/1core ???? prtdiag ????????4core=32???????????????pginfo ?????????????????core ???????????????????? # ./prtdiag -v System Configuration: Oracle Corporation sun4v Netra SPARC T4-1 ???????: 130560 M ??? ================================ ?? CPU ================================ CPU ID Frequency Implementation Status ------ --------- ---------------------- ------- 0 2848 MHz SPARC-T4 on-line 1 2848 MHz SPARC-T4 on-line 2 2848 MHz SPARC-T4 on-line 3 2848 MHz SPARC-T4 on-line 4 2848 MHz SPARC-T4 on-line 5 2848 MHz SPARC-T4 on-line 6 2848 MHz SPARC-T4 on-line 7 2848 MHz SPARC-T4 on-line 8 2848 MHz SPARC-T4 on-line 9 2848 MHz SPARC-T4 on-line 10 2848 MHz SPARC-T4 on-line 11 2848 MHz SPARC-T4 on-line 12 2848 MHz SPARC-T4 on-line 13 2848 MHz SPARC-T4 on-line 14 2848 MHz SPARC-T4 on-line 15 2848 MHz SPARC-T4 on-line 16 2848 MHz SPARC-T4 on-line 17 2848 MHz SPARC-T4 on-line 18 2848 MHz SPARC-T4 on-line 19 2848 MHz SPARC-T4 on-line 20 2848 MHz SPARC-T4 on-line 21 2848 MHz SPARC-T4 on-line 22 2848 MHz SPARC-T4 on-line 23 2848 MHz SPARC-T4 on-line 24 2848 MHz SPARC-T4 on-line 25 2848 MHz SPARC-T4 on-line 26 2848 MHz SPARC-T4 on-line 27 2848 MHz SPARC-T4 on-line 28 2848 MHz SPARC-T4 on-line 29 2848 MHz SPARC-T4 on-line 30 2848 MHz SPARC-T4 on-line 31 2848 MHz SPARC-T4 on-line ======================= Physical Memory Configuration ======================== ???? # pginfo -p -T 0 (System [system,chip]) CPUs: 0-31 `-- 3 (Data_Pipe_to_memory [system,chip]) CPUs: 0-31 |-- 2 (Floating_Point_Unit [core]) CPUs: 0-7 | `-- 1 (Integer_Pipeline [core]) CPUs: 0-7 |-- 5 (Floating_Point_Unit [core]) CPUs: 8-15 | `-- 4 (Integer_Pipeline [core]) CPUs: 8-15 |-- 7 (Floating_Point_Unit [core]) CPUs: 16-23 | `-- 6 (Integer_Pipeline [core]) CPUs: 16-23 `-- 9 (Floating_Point_Unit [core]) CPUs: 24-31 `-- 8 (Integer_Pipeline [core]) CPUs: 24-31 T4 ????????????????????????????????????????????????? T3 ?????(S2 core)?????T4 ?????(S3 core)?????????????5???????????? T3 ?????(S2 core)?????????????????????????(????????)?????????????????????????????????????????????·???????????????????????????????????????? ????T4 ????????????????????????????T4 ??????????·??????? Netra SPARC T4-1 4core ????????????????????????????????????T3 ???????????????????????????? ?????????Netra SPARC T4-1 ??????????????? Netra SPARC T4-1 ?? Computing 1 x SPARC T4 4?? 32???? or 8 ?? 64 ???? 2.85GHz CPU (1?????8????) 16 x DDR3 DIMM (?? 256GB ?????16GB DIMM ???) I/O and Storage 3 x Low Profile PCI-Express Gen2 ???? (2 x 10Gb Ethernet XAUI ???????) 2 x Full-height Half-length PCI-Express Gen2 ???? 4 x 10/100/1000 Ethernet ???????? 4 x 2.5” SAS2 HDD 4 x USB ??? (?? 2, ?? 2) RAS and Management and Power Supply ???? (RAID????), ????PSU ?????????? ILOM?????????????? 2N (1+1) , AC ???? DC ?? Support OS Oracle Solaris 10 10/9, 9/10, 8/11, Oracle Solaris 11 11/11 Oracle VM Server for SPARC 2.1 (LDoms) ???? ??? NEBS Level3?? ??????21” 19”(EIA-310D),23”,24”,600mm????? ?????(?????)????????? ????SPARC T4 ????????SPARC T4 ?????????????????????????(4???)???????????? Oracle OpenWorld Tokyo 2012 ?3??(4/4(?)?4/5(?)?4/6(?))?????????????????????&?????????????????SPARC T4 ?????????????????????????????????·?????????????????SPARC T4 ???????????????????!? Oracle OpenWorld Tokyo 2012 http://www.oracle.com/openworld/jp-ja/index.html ????·???????????? 4/6(?) Develop D3-13 (14:00 - 14:45) ???????????49 ??? ?????? 7264 ???????????????

    Read the article

  • faster implementation of sum ( for Codility test )

    - by Oscar Reyes
    How can the following simple implementation of sum be faster? private long sum( int [] a, int begin, int end ) { if( a == null ) { return 0; } long r = 0; for( int i = begin ; i < end ; i++ ) { r+= a[i]; } return r; } EDIT Background is in order. Reading latest entry on coding horror, I came to this site: http://codility.com which has this interesting programming test. Anyway, I got 60 out of 100 in my submission, and basically ( I think ) is because this implementation of sum, because those parts where I failed are the performance parts. I'm getting TIME_OUT_ERROR's So, I was wondering if an optimization in the algorithm is possible. So, no built in functions or assembly would be allowed. This my be done in C, C++, C#, Java or pretty much in any other. EDIT As usual, mmyers was right. I did profile the code and I saw most of the time was spent on that function, but I didn't understand why. So what I did was to throw away my implementation and start with a new one. This time I've got an optimal solution [ according to San Jacinto O(n) -see comments to MSN below - ] This time I've got 81% on Codility which I think is good enough. The problem is that I didn't take the 30 mins. but around 2 hrs. but I guess that leaves me still as a good programmer, for I could work on the problem until I found an optimal solution: Here's my result. I never understood what is those "combinations of..." nor how to test "extreme_first"

    Read the article

  • Android - Querying the SMS ContentProvider?

    - by Donal Rafferty
    I currently register a content observer on the following URI "content://sms/" to listen out for incoming and outgoing messages being sent. This seems to work ok and I have also tried deleting from the sms database but I can only delete an entire thread from the following URI "content://sms/conversations/" Here is the code I use for that String url = "content://sms/"; Uri uri = Uri.parse(url); getContentResolver().registerContentObserver(uri, true, new MyContentObserver(handler)); } class MyContentObserver extends ContentObserver { public MyContentObserver(Handler handler) { super(handler); } @Override public boolean deliverSelfNotifications() { return false; } @Override public void onChange(boolean arg0) { super.onChange(arg0); Log.v("SMS", "Notification on SMS observer"); Message msg = new Message(); msg.obj = "xxxxxxxxxx"; handler.sendMessage(msg); Uri uriSMSURI = Uri.parse("content://sms/"); Cursor cur = getContentResolver().query(uriSMSURI, null, null, null, null); cur.moveToNext(); String protocol = cur.getString(cur.getColumnIndex("protocol")); if(protocol == null){ Log.d("SMS", "SMS SEND"); int threadId = cur.getInt(cur.getColumnIndex("thread_id")); Log.d("SMS", "SMS SEND ID = " + threadId); Cursor c = getContentResolver().query(Uri.parse("content://sms/outbox/" + threadId), null, null, null, null); c.moveToNext(); int p = cur.getInt(cur.getColumnIndex("person")); Log.d("SMS", "SMS SEND person= " + p); //getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadId), null, null); } else{ Log.d("SMS", "SMS RECIEVE"); int threadIdIn = cur.getInt(cur.getColumnIndex("thread_id")); getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadIdIn), null, null); } } } However I want to be able to get the recipricant and the message text from the SMS Content Provider, can anyone tell me how to do this? And also how to delete one message instead of an entire thread?

    Read the article

  • VSTS 2010 SGEN : error : Could not load file or assembly (Exception from HRESULT: 0x80131515)

    - by Developer IT
    Hi ! I am experiencing a strange issue with VS2010. We use TFS to build our API dlls and we used to reference them in our projects usign a mapped network drive that was fully trusted. We have been working like that for at least two years and everything worked perfectly. Today, I converted a webapp to vs2010 and when I compile it in Release, it's giving me: SGEN : error : Could not load file or assembly 'file:///L:\Api\Release API_20100521.1\Release\CS.API.Exceptions.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) The strange thing is that it's working when it's under the Debug profile... I tried adding the <runtime> <loadFromRemoteSources enabled="true" /> </runtime> into app.config and still no luck (See http://social.msdn.microsoft.com/Forums/en/msbuild/thread/d12f6301-85bf-4b9e-8e34-a06398a60df0 and http://msdn.microsoft.com/en-us/library/dd409252(VS.100).aspx) I am pretty sure that this issue is from visual studio or msbuild, as our code won't run from a network share when in prod because all the referenced dll's are copied into the bin folder. If anyone has an solution (or just an idea for a search path) please let me know !

    Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >