Search Results

Search found 17860 results on 715 pages for 'virtual pc'.

Page 261/715 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Changing the IP address with a name [closed]

  - by fede

  I have a web server (xampp) in a particular PC running on my LAN, and I added the following line in the 'hosts' file : 127.0.0.1 mysite. Then, in another PC connected to the LAN, I'm trying to acces the previous web server by typing 'http://mysite/index.php' on the web browser, with no luck. But if I type the IP from the server computer (http://192.168.2.87/index.php) I am able to access the web site. So, what should i configure so when i type 'http://mysite/index.php' I get the same result as http:// 192.168.2.87/index.php ?? Thanx!

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• IIS 7 Application Pools using a different amount of memory on multiple servers behind a load balancer

  - by Jim March

  We have 6 servers in a web farm behind an F5. There are approximately 25 AppPools on each of these servers. On servers 1 - 5 the apppools are consuming approx 500MB Private Bytes, and 5GB Virtual Bytes. On server 6 the apppools are consuming approx 800MB Private Bytes, and 8GB Virtual Bytes. I can not seem to figure out why we have this difference. The code is the exact same on each box. We replicate the apphost.config between the boxes, so the Appplication Configs are identical. The only difference seems to be that this box consumes more RAM, and in turn ends up using a lot more CPU. During Black Friday we observed the CPU on server 6 spiking to 100% and noticed that the % Memory Commit was also near 100%, while the rest of the farm was at closer to 50% utilization. Pulling the 6th server from the load balancer dropped CPU/Memory on the 6th server back to normal, and did not cause a noticeable strain on the other servers.

  Read the article

• Program for keeping encrypted files.

  - by Giorgi

  I am looking for a program which will encrypt files specified by me and allow me to view/edit/delete those files without creating a virtual disk. I do not want to have virtual disk as a domain administrator can access it so truecrypt is not the possibility. One possibility is to use winrar with password protected archive but winrar serves a different goal so it is not very user friendly for this purpose. If it's possible it would be nice if the program does not creates temp files while I open the files. Any suggestions?

  Read the article

• Windows 7: How to boot up in normal mode after improper shut down?

  - by Level1Coder

  I work in two different locations and whenever there is a power outage at one of the locations, Windows 7 detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows 7 enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows 7 always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• Sync content from my iPad to iTunes? i.e. "reverse" syncing

  - by Jim

  I recently had to reset my PC back to factory settings which lost my entire iTunes library. I still have my music and other files on my iPad and want to sync it back to the PC. Upon syncing it only gives me two options. "Erase and Sync" which replaces the contents of my iPad with the blank iTunes library, or, "Transfer Purchases" which reads like it will only transfer the purchases from iPad to iTunes. I would like to avoid re-burning my entire CD library to iTunes all over again. Is there a way for me to sync the iPad to the iTunes library (aka the computer)?

  Read the article

• Notebook display not working properly

  - by jfcfar

  I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

  Read the article

• basic help for Nat configuration needed

  - by Klaes S.

  I have a server with a IP 1.0.0.5/24. This is the main IP address of the server, and now I have two other IP addresses for the server, they are 1.0.2.30/24 and 1.0.2.31/24. I want to make a VirtualBox running another OS accessible through the Internet, and only allow the specified IP to reach the virtual box. I'm new to iptables and therefore I need some basic help and getting started information about this. The hosting provider does not allow more than on MAC address per switch port, which means that I'm not able to make bridge as far as I know. Futhermore I want the host, to reject the extra IPs so its only the VirtualBox / virtual machine that accepts the request's on the extra IPS.

  Read the article

• Can't copy files from network drive

  - by user630320

  I have weird problem with copying files. When I copy file from network drive into C drive nothing happens but when I copy file from network drive to desktop I can copy the file. Also if I copy files from desktop into C it works fine. I have full local admin permission on this PC and the network drive. I have try these things Created new profile Run Windows Update Run checkdisk I'm using Windows XP 32bit pro Update: Network path: \\server1\shared\folder PC: C:\ (this doesn't work) C:\Documents and settings\Userid\Desktop (This works fine)

  Read the article

• Fully Qualified Domain name on Ubuntu Server

  - by Fazal

  I've setup a LAMP server on Ubuntu 10.04 (lucid) and have also installed Virtualmin. This is my first attempt at setting up a server of any sort. I set up one virtual host using Virtualmin and so far so good. Some odd things are happening though, such as when I type in my primary domain into a browser, I see the contents of the virtual server instead of what should be in the default directory. I'm going to use 123.345.789 and example.co.uk instead of my actual ip and domain name's if thats ok. I checked my hostname by using hostname -f and got production1 as my response The contents of my /etc/hosts file is (ip's and domain changed to something generic for this post): 127.0.0.1 localhost localhost.localdomain 123.456.789 production1.example.co.uk 123.456.789 production1 shouldn't my FQD be production1.example.co.uk? How can I go about changing this?, a simple step by step instruction would be great! thanks in advance.

  Read the article

• In Process Explorer is it possible change scaling of activity graph the be able to further analyse graph?

  - by therobyouknow

  Is there any way to zoom in, in the System Internals Process Explorer graph? Background I'm trying to work out why my PC freezes/locks up for about a second (the pointer does not move) every so often. This has only been happening for the last 2 days. There is a very narrow spike associated with the freeze, but it's hard to hover over it an analyse what is causing it. My PC spec: ThinkPad X201S 1440x900 i7 2.0GHz 8Gb RAM, 256GB Samsung 840Pro SSD, Windows 8.1 Pro 64bit CalDigit USB 3.0 ExpressCard 34, Ultrabase X200 with DisplayPort to HDMI

  Read the article

• "Cannot allocate memory " error whle copying data from window to ubuntu

  - by John

  I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

  Read the article

• Windows backups to VM Esxi

  - by Martyn

  I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

  Read the article

• windows 8 on macbook locks after 2 mins despite high performance settings

  - by Mark

  I am running my Macbook Prop as a Windows 8 machine using bootcamp and for some reason, when I leave the keyboard/mouse alone for 2 mins it locks the PC (i.e. goes to the lock screen). I have (of course) checked the power settings and I can assure you that it is not set to these settings. I did notice that when I added my work's Mail Account the computer asked me to accept some group policy settings, which I did, so I suspect that this is a group policy setting, but I cannot find it. Can someone help? P.S. I have searched these forums first, and this is different to the PC going to sleep once locked, this is locking while logged in after 2 mins. Thanks.

  Read the article

• Hyper-V: determine the guest's name given the GUID

  - by syneticon-dj

  How would I go about determining the guest's name given its GUID or vice-versa, preferably with only the Hyper-V/Server Core stock install at hands? Rationale: I am in favor of having a repository of dirty tricks to revert to when in great need. To immediately quiesce all (storage) operations of a VM guest without losing the state, I used to run kill 17 <all VM's virtual processes> (signaling SIGSTOP) and resumed afterwards using kill 19 <all VM's virtual processes> (signaling SIGCONT) in ESXi/vSphere shell. I tried the same technique with Hyper-V using Process Explorer's "Suspend" functionality on the vmwp.exe processes and it seemed to work. I have yet to find a way for easily identifying the processes to suspend, though - the vmwp command line is only listing a GUID.

  Read the article

• Per-user vhost logging

  - by kojiro

  I have a working per-user virtual host configuration with Apache, but I would like each user to have access to the logs for his virtual hosts. Obviously the ErrorLog and CustomLog directives don't accept the wildcard syntax that VirtualDocumentRoot does, but is there a way to achieve logs in each user's directory? <VirtualHost *:80> ServerName *.example.com ServerAdmin [email protected] VirtualDocumentRoot /home/%2/projects/%1 <Directory /home/*/projects/> Options FollowSymlinks Indexes IndexOptions FancyIndexing FoldersFirst AllowOverride All Order Allow,Deny Allow From All Satisfy Any </Directory> Alias /favicon.ico /var/www/default/favicon.ico Alias /robots.txt /var/www/default/robots.txt LogLevel warn # ErrorLog /home/%2/logs/%1.error.log # CustomLog /home/%2/logs/%1.access.log combined </VirtualHost>

  Read the article

• How to prevent windows 7 shutdown/lock/logoff?

  - by user507993

  Hi, guys In my company staff have to check in after retch to company and check out before leave company on a internal site, sometimes I forget it totally...it's awful. Now i want a program which shows a prompt window when lock/logoff/shutdown, in this way i won't forget any more. Indeed i develop a program (some words and two buttons), and configure this program started when lock/logoff/shutdown in group policy, here is the question: how can i prevent my windows 7 shutdown/logoff/lock? it means i click the button "yes, i want" my pc still running and chrome or something showed up, if i click the button "no, thanks", my pc will shutdown/logoff/lock. please help, thx! i am looking forward to you. ps: i am not good in english, hope you understand. thx again!

  Read the article

• How to stop any dialog windows from showing when inserting a USB drive in Windows?

  - by jasondavis

  1) I just found a really interesting program that allows me to use a USB drive as a windows login key. It is called Rohos Logon Key. IF I remobve my USB drive/key from the PC then I can have the PC lock or hibernate or any other option, I have been looking for such a solution for many years but never knew one existed until this and it works much better then I imagined. I do have a couple minor issues though (im using Windows 7 pro). When I remove and then re-insert my USB key, windows prompts me with this dialog here... Generally when I get this I just click on "Continue without scanning" however I am looking for a solution to just make it not even show this at all, is it possible to disable it from showing? 2) I also get this dialog as well when I insert USB drives/key... Would it be possible to not show this as well or have it pick an option by default or anything really?

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• How to meet Windows 8 upgrade's 20 GB requirement on a 40 GB SSD with a 22 GB Windows 7 install?

  - by deryus

  A PC I have has Windows 7 installed on a 40 GB SSD, and I bought a Windows 8 upgrade for it. The current Windows folder on it however is 22 GB, that's after removing hibernation, turning off the pagefile and removing all extra programs/features. So even if I purge every other file and folder, the Windows folder itself takes more than half the disk. The PC also has a 1 TB HDD, but the upgrade installer didn't give me any options about choosing another drive. So, is my only option to reinstall Windows 7 on a larger drive, then proceed with the Windows 8 upgrade? Or is there anything I can remove from the Windows folder that while might be dangerous for long term usage, is fine for the few minutes I need to get Windows 8 installing?

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• getting started automating virtualization with powershell on windows

  - by fschwiet

  What are some good books or resources for learning automate virtual PCs on Windows DataCenter? I want to be able to build VPCs with both automated installs and from images, preferably via powershell. I would like to be able to setup an IIS environment for automated testing, and configure end user installs of different versions of Windows. I am not interested in corpnet type scenarios (active directory, domains, etc) so much for now. I'm comfortable with powershell and programming in general. I haven't yet installed Windows DataCenter, maybe once I install it will be clear enough. But looking for resources on how to managed virtual PCs programmatically I haven't found anything.

  Read the article

• Trying to figure Windows 2008 Server and Active Directory - complete novice!

  - by Simon E

  I am a novice in networking and I want to learn more about Windows Server 2008 and Active Directory. Basically I have serveral Windows 7 PC's in my home and an IBM server with Win Server 2008 installed. I have enabled Active Directory and set the server to have a static IP. Thats as far as I have got and I feel a little overwhelmed at the moment as I am not sure what to do next. What I eventually want to do is have the Windows 7 PC's to be able to be authenticated by the server - basically a mock up of what most large or medium sized businesses/organisations run. Sorry if I sound a bit sketchy, but I understand some things but not the whole picture, I guess I just need confirmation that I am sort of on the right track :) Also what are some good resources out there you can point me to, what are the absolute basics I need to to get started so I can further my learning?

  Read the article

• How to restrict access to the files outside document root in apache?

  - by Bakhtiyor

  I have virtual hosts in /var/www/site1 and /var/www/site2 folders. I want to restrict access to the files outside document root in apache virtual host, i.e. site1 could not access files of site2. Right now this scripts in /var/www/site1 works fine, which is not good: $filename = "/var/www/site2/somefile"; $handle = fopen($filename, "r"); $contents = fread($handle, filesize($filename)); echo $contents; How to solve this problem please? Thank you very much!

  Read the article

• Poor disk performance with high disk capacity usage

  - by GoldenNewby

  I've heard numerous times in the web hosting industry that using "too much" disk space on a drive is bad for performance. Is this just a myth? Can someone explain why this is an issue, even in a situation where the amount of IO done to the drive would be the same at 10% as it would be at 90%? I'm especially curious in the case of virtual servers. If I set up 10 Logical volumes as the virtual disks for some VMs, is it going to run better if I "waste" 20% of the disk space?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >