Search Results

Search found 32130 results on 1286 pages for 'local search'.

Page 262/1286 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

  • How does browser search tool work on web page?

    - by GTM
    I am trying to figure out how the search tool in a web browser is being able to parse through the entire web page(assuming huge content on a page) and highlight the result as we type. Does it pre-cache the page while loading in a map or use regex to get a quick result on the fly?

    Read the article

  • Active directory 1355 0x54b ERROR_NO_SUCH_DOMAIN

    - by Elgreco08
    Hi! I have 3 domain controlers 2x 2008 1x 2003 server When i use the nltest /server:dcN.domain.local /sc_verify:domain.local i get: on the 2 of them OK status on one of them i get I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN i did some tests and when i moved the role "Domain Role Owner" from the server i had the error to another DC the error moved also is there any connection with the Domain role owner role? and the 1355 error? //// To be more clear about: dc1 server FMSO role "domain owner role" testing nltest /sc_verify:domain.local error: I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN dc2 server no FMSO role testing nltest /sc_verify:domain.local success now i move fmso domain owner rule to server DC2 dc1 server FMSO none testing nltest /sc_verify:domain.local sucess dc2 server FMSO role "domain owner role" testing nltest /sc_verify:domain.local error: I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

    Read the article

  • SCVMM 2012 R2 - Installing Virtual Switch Fails with Error 2916

    - by Brian M.
    So I've been attempting to teach myself SCVMM 2012 and Hyper-V Server 2012 R2, and I seem to have hit a snag. I've connected my Hyper-V Host to SCVMM 2012 successfully, and created a logical network, logical switch, and uplink port profile (which I essentially blew through with the default settings). However when I attempt to create a virtual switch on my Hyper-V host, I run into an issue. The job will use my logical network settings I created to configure the virtual switch, but when it tries to apply it to the host, it stalls and eventually fails with the following error: Error (2916) VMM is unable to complete the request. The connection to the agent vmhost1.test.loc was lost. WinRM: URL: [h**p://vmhost1.test.loc:5985], Verb: [GET], Resource: [h**p://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Msvm_ConcreteJob?InstanceID=2F401A71-14A2-4636-9B3E-10C0EE942D33] Unknown error (0x80338126) Recommended Action Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with econ-hyperv2.econ.loc over WinRM by successfully running the following command: winrm id –r:vmhost1.test.loc This problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (h**p://support.microsoft.com/kb/982293) is installed on it. If the error persists, restart vmhost1.test.loc and then try the operation again. Refer to h**p://support.microsoft.com/kb/2742275 for more details. I restarted the server, and upon booting am greeted with a message stating "No active network adapters found." I load up powershell and run "Get-NetAdapter -IncludeHidden" to see what's going on, and get the following: Name InterfaceDescription ifIndex Status ---- -------------------- ------- ----- Local Area Connection* 5 WAN Miniport (PPPOE) 6 Di... Ethernet Microsoft Hyper-V Network Switch Def... 10 Local Area Connection* 1 WAN Miniport (L2TP) 2 Di... Local Area Connection* 8 WAN Miniport (Network Monitor) 9 Up Local Area Connection* 4 WAN Miniport (PPTP) 5 Di... Ethernet 2 Broadcom NetXtreme Gigabit Ethernet 13 Up Local Area Connection* 7 WAN Miniport (IPv6) 8 Up Local Area Connection* 9 Microsoft Kernel Debug Network Adapter 11 No... Local Area Connection* 3 WAN Miniport (IKEv2) 4 Di... Local Area Connection* 2 WAN Miniport (SSTP) 3 Di... vSwitch (TEST Test Swi... Hyper-V Virtual Switch Extension Ada... 17 Up Local Area Connection* 6 WAN Miniport (IP) 7 Up Now the machine is no longer visible on the network, and I don't have the slightest idea what went wrong, and more importantly how to undo the damage I caused in order to get back to where I was (save for re-installing Hyper-V Server, but I really would rather know what's going on and how to fix it)! Does anybody have any ideas? Much appreciated!

    Read the article

  • Twitter gem - undefined method `stringify_keys’

    - by Piet
    Have you been getting the following errors when running the Twitter gem lately ? /usr/local/lib/ruby/gems/1.8/gems/httparty-0.4.3/lib/httparty/response.rb:15:in `send': undefined method `stringify_keys' for # (NoMethodError) from /usr/local/lib/ruby/gems/1.8/gems/httparty-0.4.3/lib/httparty/response.rb:15:in `method_missing’ from /usr/local/lib/ruby/gems/1.8/gems/mash-0.0.3/lib/mash.rb:131:in `deep_update’ from /usr/local/lib/ruby/gems/1.8/gems/mash-0.0.3/lib/mash.rb:50:in `initialize’ from /usr/local/lib/ruby/gems/1.8/gems/twitter-0.6.13/lib/twitter/search.rb:101:in `new’ from /usr/local/lib/ruby/gems/1.8/gems/twitter-0.6.13/lib/twitter/search.rb:101:in `fetch’ from test.rb:26 It’s because Twitter has been sending back plain text errors that are treated as a string instead of json and can’t be properly ‘Mashed’ by the Twitter gem. Also check http://github.com/jnunemaker/twitter/issues#issue/6. Without diving into the bowels of the Twitter gem or HTTParty, you could ‘begin…rescue’ this error and try again in 5 minutes. I fixed it by overriding the offending code to return nil and checking for a nil response as follows: module Twitter class Search def fetch(force=false) if @fetch.nil? || force query = @query.dup query[:q] = query[:q].join(' ') query[:format] = 'json' #This line is the hack and whole reason we're monkey-patching at all. response = self.class.get('http://search.twitter.com/search', :query => query, :format => :json) #Our patch: response should be a Hash. If it isnt, return nil. return nil if response.class != Hash @fetch = Mash.new(response) end @fetch end end end (adapted from http://github.com/jnunemaker/twitter/issues#issue/9) If you have a better solution: speak up!

    Read the article

  • Why do I get "unsupported architecture" errors trying to install a Python library in OSX?

    - by Emma518
    I am trying to install a Python library in the Presto package, source http://www.cv.nrao.edu/~sransom/presto/ Using 'gmake fftfit' I get the following error: cd fftfit_src ; f2py-2.7 -c fftfit.pyf *.f running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "fftfit" sources creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 f2py options: [] f2py: fftfit.pyf Reading fortran codes... Reading file 'fftfit.pyf' (format:free) Post-processing... Block: fftfit Block: cprof Block: fftfit Post-processing (stage 2)... Building modules... Building module "fftfit"... Constructing wrapper function "cprof"... c,amp,pha = cprof(y,[nmax,nh]) Constructing wrapper function "fftfit"... shift,eshift,snr,esnr,b,errb,ngood = fftfit(prof,s,phi,[nmax]) Wrote C/API module "fftfit" to file "/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64- 2.7/fftfitmodule.c" adding '/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fortranobject.c' to sources. adding '/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7' to include_dirs. copying /Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/f2py/src/fortranobject.c -> /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 copying /Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9-intel.egg/numpy/f2py/src/fortranobject.h -> /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Found executable /usr/local/bin/gfortran customize Gnu95FCompiler customize Gnu95FCompiler using build_ext building 'fftfit' extension compiling C sources C compiler: /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch ppc -arch i386 -arch x86_64 -g -O2 creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8 creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 compile options: '-I/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9- x86_64-2.7 -I/Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/core/include - I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c' clang: /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64- 2.7/fftfitmodule.c In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:63: /usr/include/sys/cdefs.h:658:2: error: Unsupported architecture #error Unsupported architecture ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:64: /usr/include/machine/limits.h:8:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: In file included from /usr/include/sys/_types.h:33: /usr/include/machine/_types.h:34:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: /usr/include/sys/_types.h:94:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_blkcnt_t; /* total blocks */ ^ /usr/include/sys/_types.h:95:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_blksize_t; /* preferred block size */ ^ /usr/include/sys/_types.h:96:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_dev_t; /* dev_t */ ^ /usr/include/sys/_types.h:99:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_gid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:100:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_id_t; /* [XSI] pid_t, uid_t, or gid_t*/ ^ /usr/include/sys/_types.h:101:9: error: unknown type name '__uint64_t' typedef __uint64_t __darwin_ino64_t; /* [???] Used for 64 bit inodes */ ^ /usr/include/sys/_types.h:107:9: error: unknown type name '__darwin_natural_t' typedef __darwin_natural_t __darwin_mach_port_name_t; /* Used by mach */ ^ /usr/include/sys/_types.h:109:9: error: unknown type name '__uint16_t' typedef __uint16_t __darwin_mode_t; /* [???] Some file attributes */ ^ /usr/include/sys/_types.h:110:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_off_t; /* [???] Used for file sizes */ ^ /usr/include/sys/_types.h:111:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_pid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:131:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_sigset_t; /* [???] signal set */ ^ /usr/include/sys/_types.h:132:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_suseconds_t; /* [???] microseconds */ ^ /usr/include/sys/_types.h:133:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_uid_t; /* [???] user IDs */ ^ /usr/include/sys/_types.h:134:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */ ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:71: /usr/include/sys/_types/_va_list.h:31:9: error: unknown type name '__darwin_va_list'; did you mean '__builtin_va_list'? typedef __darwin_va_list va_list; ^ note: '__builtin_va_list' declared here In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:72: /usr/include/sys/_types/_size_t.h:30:9: error: unknown type name '__darwin_size_t'; did you mean '__darwin_ino_t'? typedef __darwin_size_t size_t; ^ /usr/include/sys/_types.h:103:26: note: '__darwin_ino_t' declared here typedef __darwin_ino64_t __darwin_ino_t; /* [???] Used for inodes */ ^ fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/5.1/include/limits.h:38: In file included from /usr/include/limits.h:63: /usr/include/sys/cdefs.h:658:2: error: Unsupported architecture #error Unsupported architecture ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:64: /usr/include/machine/limits.h:8:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: In file included from /usr/include/sys/_types.h:33: /usr/include/machine/_types.h:34:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: /usr/include/sys/_types.h:94:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_blkcnt_t; /* total blocks */ ^ /usr/include/sys/_types.h:95:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_blksize_t; /* preferred block size */ ^ /usr/include/sys/_types.h:96:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_dev_t; /* dev_t */ ^ /usr/include/sys/_types.h:99:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_gid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:100:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_id_t; /* [XSI] pid_t, uid_t, or gid_t*/ ^ /usr/include/sys/_types.h:101:9: error: unknown type name '__uint64_t' typedef __uint64_t __darwin_ino64_t; /* [???] Used for 64 bit inodes */ ^ /usr/include/sys/_types.h:107:9: error: unknown type name '__darwin_natural_t' typedef __darwin_natural_t __darwin_mach_port_name_t; /* Used by mach */ ^ /usr/include/sys/_types.h:109:9: error: unknown type name '__uint16_t' typedef __uint16_t __darwin_mode_t; /* [???] Some file attributes */ ^ /usr/include/sys/_types.h:110:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_off_t; /* [???] Used for file sizes */ ^ /usr/include/sys/_types.h:111:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_pid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:131:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_sigset_t; /* [???] signal set */ ^ /usr/include/sys/_types.h:132:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_suseconds_t; /* [???] microseconds */ ^ /usr/include/sys/_types.h:133:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_uid_t; /* [???] user IDs */ ^ /usr/include/sys/_types.h:134:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */ ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:71: /usr/include/sys/_types/_va_list.h:31:9: error: unknown type name '__darwin_va_list'; did you mean '__builtin_va_list'? typedef __darwin_va_list va_list; ^ note: '__builtin_va_list' declared here In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:72: /usr/include/sys/_types/_size_t.h:30:9: error: unknown type name '__darwin_size_t'; did you mean '__darwin_ino_t'? typedef __darwin_size_t size_t; ^ /usr/include/sys/_types.h:103:26: note: '__darwin_ino_t' declared here typedef __darwin_ino64_t __darwin_ino_t; /* [???] Used for inodes */ ^ fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. error: Command "/usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch ppc -arch i386 -arch x86_64 -g -O2 -I/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7 -I/Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/core/include - I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c -o /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.o" failed with exit status 1 Makefile:5: recipe for target 'fftfit' failed gmake: *** [fftfit] Error 1 How can I solve this architecture problem?

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • nginx can't load images,css,js

    - by EquinoX
    When I point to a URL in nginx where it has images extension such as: http://50.56.81.42/phpMyAdmin/themes/original/img/logo_right.png (as example) it gives me the 404 error as it can't find the file, but the file is actually there. What is potentially wrong? UPDATE: Here's the error log that I was able to pull out: 2011/02/27 05:53:29 [error] 18679#0: *225 open() "/usr/local/nginx/html/phpMyAdmin/js/mooRainbow/mooRainbow.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/js/mooRainbow/mooRainbow.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *226 open() "/usr/local/nginx/html/phpMyAdmin/print.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/print.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *228 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/logo_right.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/logo_right.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *223 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/b_help.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/b_help.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *227 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/s_warn.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/s_warn.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *227 open() "/usr/local/nginx/html/phpMyAdmin/favicon.ico" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/favicon.ico HTTP/1.1", host: "50.56.81.42" 2011/02/27 05:54:39 [error] 18679#0: *237 open() "/usr/local/nginx/html/phpMyAdmin/print.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/print.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *235 open() "/usr/local/nginx/html/phpMyAdmin/js/mooRainbow/mooRainbow.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/js/mooRainbow/mooRainbow.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *238 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/logo_right.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/logo_right.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *239 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/b_help.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/b_help.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *233 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/s_warn.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/s_warn.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *233 open() "/usr/local/nginx/html/phpMyAdmin/favicon.ico" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/favicon.ico HTTP/1.1", host: "50.56.81.42" Here's my nginx.conf file, in case I am missing something: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.(js|css|png|jpg|jpeg|gif|ico|html)$ { expires max; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root /usr/share/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one location ~ /\.ht { deny all; } } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } What does this mean? It can't pull out the .css, etc....

    Read the article

  • plesk 9 spamassassin server wide blacklist via cron?

    - by Kqk
    we're running ubuntu 8.04 LTS and plesk 9.2 our simple task is to set up a periodic black list for spamassassin, e.g. using this script .. #!/bin/sh #! Script by AJR to update local spamassassin rules cd /tmp wget -c http://www.stearns.org/sa-blacklist/sa-blacklist.current mv sa-blacklist.current local.cf -f mv local.cf /etc/mail/spamassassin -f rm local.cf -f /etc/init.d/psa-spamassassin restart now, this script runs fine, but plesk doesn't seem to recognize the blacklist in its GUI. which is annoying, especially because plesk itself writes to /etc/mail/spamassassin/local.cf. i wasn't able to find out the secret place, where plesk distinguishes between entries in local.cf added via GUI and command line. any help is appreciated! thanks.

    Read the article

  • Microsoft Channel 9 Interviews Mei Liang to Introduce Sample Browser Extension for Visual Studio 2012 and 2010

    - by Jialiang
    This morning, Microsoft Channel 9 interviewed Mei Liang - Group Manager of Microsoft All-In-One Code Framework - to introduce the newest Sample Browser extension for Visual Studio 2012 &2010.   This extension provides a way for developers to search and download more than 4500 code samples from within Visual Studio, including over 700 Windows 8 samples and more than 1000 All-In-One Code Framework customer-driven code samples. Mei shows us not only the extension, but also the standalone version of the Sample Browser.   http://channel9.msdn.com/Shows/Visual-Studio-Toolbox/Sample-Browser-Visual-Studio-Extension   Microsoft All-In-One Code Framework, working in close partnership with the Visual Studio product team and MSDN Samples Gallery, developed the Sample Browser extension for both Visual Studio 2012 and Visual Studio 2010.  As an effort to evolve the code sample use experience and improve developers' productivity, the Sample Browser allows programmers to search, download and open over 4500 code samples from within Visual Studio with just a few simple clicks.  If no existing code sample can meet the needs, developers can even request a code sample easily from Microsoft thanks to the free “Sample Request Service” offered by Microsoft All-In-One Code Framework.  Through innovations, the teams hope to put the power of tens of thousands of code samples at developers’ fingertips. In short 3 months, the Sample Browser Visual Studio Extension has been installed by 100K global users.  It is also selected as one of the six most highly regarded and commonly used tools for Visual Studio that will make your programming experience feel like never before.   Got to love the All-In-One Code Framework team! You guys know this is THE go to source for code samples. Get this extension and you'll never need to leave VS2012 (well except for bathroom trips, but that's TMI anyway... ;) Read More... From: Greg Duncan (Author of CoolThingOfTheDay) 9/6/2011 12:00 AM The one software design pattern that I have used in just about every application I’ve written is “cut-and-paste,” so the new “Sample Browser” – read sample as a noun not an adjective – is a great boon to my productivity. Read More... From: Jim O'Neil (Microsoft Developer Evangelist) 9/28/2011 12:00 AM Install: http://aka.ms/samplebrowservsx Microsoft All-In-One Code Framework also offers the standalone version of Sample Browser.   The standalone version is particularly useful to Visual Studio Express edition or Visual Studio 2008 users, who cannot install the Sample Browser Visual Studio extension.   From Grassroots’ Passion for Developers to the Innovation of Sample Browser This Sample Browser has come a very long way improving the code sample use experience.  The history can be traced back to a grass-root innovation three years ago.   In early 2009, a few MSDN forum support engineers observed that lots of developers were struggling to work in Visual Studio without adequate code samples. Programming tasks seem harder than they should be when you only read through the documentation.  Just a couple of lines of sample code could answer a lot of questions.   They had a brilliant idea: What if we produce code samples based on developers’ frequently asked programming tasks in forums, social networks and support incidents, and then aggregate all our sample code in a one-stop library to benefit developers?  And what if developers can request code samples directly from Microsoft, free of charge?  This small group of grassroots at Microsoft devoted their nights and weekends to prototyping such a customer-driven code sample library.  This simple idea eventually turned into “Microsoft All-In-One Code Framework”, aka. OneCode.  With the support from more and more passionate developers at Microsoft and the leaders in the Community and Online Support team and Microsoft Commercial Technical Services (CTS), the idea has become a continually growing library with over 1000 customer-driven code samples covering almost all Microsoft development technologies.  These code samples originated from developers’ common pains and needs should be able to help many developers.  However, if developers cannot easily discover the code samples, the effort would still be in vain.  So in early 2010, the team started the idea of Sample Browser to ease the discovery and access of these samples.  In just two months, the first version of Sample Browser was finished and released by a passionate developer.  It was a very simple application, only supporting the basic sample offline search.  Users had to download the whole 100MB sample package containing all samples first, and run the Sample Browser to search locally.   Though developers could not search and download samples on-demand, this simple application laid a solid foundation for the team’s continuous innovations of Sample Browsing experience. In 2011, MSDN Samples Gallery had a big refresh.  The online sample experience was brought to a new level thanks to its PM Steven Wilssens and the gallery team’s effort.  Microsoft All-In-One Code Framework Team saw the opportunity to realize the “on-demand” sample search and download feature with the new gallery.  The two teams formed a strong partnership to upload all the customer-driven code samples to MSDN Samples Gallery, and released the new version of Sample Browser to support “on-demand” sample downloading in April, 2011.  Mei Liang, the Group Manager of Microsoft All-In-One Code Framework, was interviewed by Channel 9 to demo the Sample Browser.  Customers love the effort and the innovation!!  This can be clearly seen from the user comments in the publishing page.   It was very encouraging to the team of All-In-One Code Framework. The team continues innovating and evolving the Sample Browser.  They found the Visual Studio product team this time, and integrated the Sample Browsing experience into the latest Visual Studio 2012.  The newly released Sample Browser Visual Studio extension makes good use of Visual Studio 2012 IDE such as the new Quick Launch bar, the code editor, the toolbar and menus to offer easy access to thousands of code samples from within the development environment.   The Visual Studio Senior Program Manager Lead - Anthony Cangialosi, the Program Manager - Murali Krishna Hosabettu Kamalesha, the MSDN Samples Gallery PM – Steven Wilssens, and the Visual Studio Senior Escalation Engineer - Ed Dore shared lots of insightful suggestions with the team.  Thanks to the brilliant cross-group collaboration inside Microsoft, tens of new features including “Local Language Support” and “Favorite Samples”, as well as a face-lifted user interface, were added to further enhance the user experience. Since the new Sample Browser Visual Studio extension was released, it has received over 100 thousand downloads and five-star ratings.  A customer told the team that he officially falls in LOVE with Microsoft All-In-One Code Framework.   The Sample Browser Innovation for Developers Never Stops! The teams would never stop improving the Sample Browser for developers’ easier lives.   The Microsoft All-In-One Code Framework, Visual Studio and MSDN Samples Gallery teams are working closely to develop the next version of Sample Browser.  Here are the key functions in development or in discussion.  We hope to learn your feedback of the effort.  You can submit your suggestions to the official Visual Studio UserVoice site.  We look forward to hearing from you! 1) Offline Sample Search This is one of the top feature requests that we have received for Sample Browser.   The Sample Browser will support the offline search mode so that developers can search downloaded code samples when they do not have internet access.  This is particularly useful to developers in Enterprises with strict proxy settings. 2) Code Snippet Support and Visual Studio Editor Integration Today, the Sample Browser supports downloading and opening sample project.   However, when developers are searching for code samples, a better user experience would be to see the code snippets in the search result first.  Developers can quickly decide if the code snippet is relevant.   They can also drag and drop the code snippet into the Visual Studio Editor to solve some simple programming tasks.  If developers want to learn more about the sample, they can then choose to download the sample project and open it in Visual Studio. 3) Enterprise Sample Sharing and Searching Large enterprises have many code samples for their own internal tools and APIs that are not appropriate to be shared publicly in MSDN Samples Gallery.   In that case, today’s Sample Browser and MSDN Samples Gallery cannot help these Enterprise developers.  The idea is to create a Code Sample Repository in TFS, and provide an additional Visual Studio extension for Enterprise developers to quickly share code samples to TFS.  The Sample Browser can be configured to connect to the TFS Code Sample Repository to search for and download code samples.  This would potentially enable the Enterprise developers to be more productive. 4) Windows Store Sample Browser With the upcoming release of Windows RT and Microsoft Surface, developers are facing a completely new world of application platform.   Not like laptop, people would often use Microsoft Surface in commute and in travel.  Internet may not be available.  Today’s Visual Studio cannot be installed and run on Windows RT, however, our enthusiastic developers would hope to spend every minute on code.  They love code!   The idea is to create a Windows Store version of Sample Browser. Search and download samples from the online Samples Gallery when the user has internet access. Browse the sample code files and learn the sample documentation of downloaded samples with or without internet access.   In addition to the "browse” function, the Sample Browser could further support “bookmark”, “learning notes”, “code review”, and “quick social sharing". Make full use of the new touch and Windows Store App UI to give developers a new “relaxing” code browsing and learning experience, anytime, anywhere. With Windows Store Sample Browser, developers can enjoy A new relaxing and enjoyable experience for developers to learn code samples You do not have to sit in front of desk and formally open Visual Studio to read code samples.  Many developers get sub-health due to staying in front of desk for a very long time.  With Windows RT, Microsoft Surface and this Windows Store Sample Browser combining with the online MSDN Samples Gallery, developers can sit in a sofa, relaxingly hold the tablet and enjoy to learn their beloved sample code with detailed documentation. Anytime, anywhere Whether you have internet access or not, whether you are at home, in office, or in commute/airplane, developers can always easily access and browse the sample code. Lightweight and fast Particularly for learning a small sample project, the Windows Store Sample Browser would be more lightweight and faster to open and browse the sample code. Please submit your feedback and suggestion to Visual Studio UserVoice.  We look forward to hearing from you and deliver a better and better sample use experience.  Happy Coding!   Special Thanks to People working behind the latest release of Sample Browser Visual Studio Extension and the great partnerships!

    Read the article

  • how to use iis 6.0 redirects?

    - by payling
    I'm attempting to use the below reference to create a re-direct for my local site with no luck. http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/6b855a7a-0884-4508-ba95-079f38c77017.mspx?mfr=true I want absolute links on my local site that point online to point to my local site instead. example absolute link [http://online.com/products] when I click the local version I'd like it to redirect to: [http://offline/products] I want to preserve everything after the domain name and append it to the server (local) name so that when I click a link it will redirect to the local site and not the online version. I've tried [http://offline$S] but that doesn't append the "suffix" /products the way I thought it should. What's going on here?

    Read the article

  • Problems starting MySQL on Mac OS X

    - by Jon
    I am not able to start MySQL server on Mac OS X 10.4.11. MySQL was installed using Macports. MySQL was running fine until it suddenly died without any obvious reason. When running "mysql", I get the error message: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/opt/local/var/run/mysql5/mysqld.sock' (2) If I try to start MySQL manually, I get the following error message: sudo /opt/local/share/mysql5/mysql/mysql.server start Starting MySQL/opt/local/share/mysql5/mysql/mysql.server: line 159: kill: (636) - No such process ERROR! In /etc/mysql/my.cnf I have: socket = __PREFIX/var/run/mysqld/mysqld.sock But the path "opt/local/var/run/mysqld/" does not exist on my system. I tried to change the socket path to "__PREFIX/var/run/mysql5/ mysqld.sock" (which is where the socket is located). Unfortunately, this did not help either. Owner and Permissions for /opt/local/var/run/mysql5/ are correctly set. Any suggestions on how to start MySQL again? Thanks for your advice.

    Read the article

  • Am I correctly handling duplicate URLs for my homepage?

    - by Rob Goldstein
    I own a Job Search site named www.conservationjobboard.com and have a concern about how the domain is viewed by search engines. The issue is that when the site was first designed, the default page was left as default.php, but the homepage was actually JobBoard.php. To handle this, the default.php page performed a redirect to the JobBoard.php file when www.conservationjobboard.com/ was requested. The main problem resulted because the redirect was a temporary redirect causing search engines to index conservationjobboard.com/ and conservationjobboard.com/JobBoard.php as 2 separate pages. This has since been corrected to use the .htaccess file so that JobBoard.php is now the default file for the root directory eliminating the need for the redirect. Problem is that search engines still show both URL's in search results (one including JobBoard.php and one that ends with /). Another potential problem is that some of my early backlinks are to conservationjobboard.com/JobBoard.php while the rest are to conservationjobboard.com The 2 outstanding questions are as follows: 1. Is my domain still being penalized by search engines like Google for having duplicate homepage URL's? 2. Are all of the back links to my homepage being considered as the same now or is the total number of back links being split between the 2 different URL's? If you think there are still issues with how we have this set-up, I was wondering if you could give me advice on what we should do differently. Thanks.

    Read the article

  • Snow Leopard: MySQL doesn't start

    - by brainfck
    Hi, I have updated to Snow Leopard and I removed mysql by following this post: http://forums.mysql.com/read.php?11,75256,255853#msg-255853 After that I have installed the mysql 64 bit community edition, but using the prefpane MySQL doesn't start. Using the terminal gives us some more informations, but I don't know how to interpret them: stefansmac:~ stefan$ cd /usr/local/mysql-5.1.42-osx10.5-x86_64/bin/ stefansmac:bin stefan$ sudo ./mysqld_safe 100105 13:56:35 mysqld_safe Logging to '/usr/local/mysql-5.0.51b-osx10.5-x86//stefansmac.local.err'. 100105 13:56:35 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql-5.0.51b-osx10.5-x86/ 100105 13:56:35 mysqld_safe mysqld from pid file /usr/local/mysql-5.0.51b-osx10.5-x86//stefansmac.local.pid ended Best regards

    Read the article

  • Multiple SSL Certificates Running on Mac OS X 10.6

    - by frodosghost.mp
    I have been running into walls with this for a while, so I posted at stackoverflow, and I was pointed over here... I am attempting to setup multiple IP addresses on Snow Leopard so that I can develop with SSL certificates. I am running XAMPP - I don't know if that is the problem, but I guess I would run into the same problems, considering the built in apache is turned off. So first up I looked into starting up the IPs on start up. I got up an running with a new StartupItem that runs correctly, because I can ping the ip address: ping 127.0.0.2 ping 127.0.0.1 And both of them work. So now I have IP addresses, which as you may know are not standard on OSx. I edited the /etc/hosts file to include the new sites too: 127.0.0.1 site1.local 127.0.0.2 site2.local I had already changed the httpd.conf to use the httpd-vhosts.conf - because I had a few sites running on the one IP address. I have edited the vhosts file so a site looks like this: <VirtualHost 127.0.0.1:80> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> <VirtualHost 127.0.0.1:443> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local SSLEngine On SSLCertificateFile "/Applications/XAMPP/etc/ssl-certs/myssl.crt" SSLCertificateKeyFile "/Applications/XAMPP/etc/ssl-certs/myssl.key" SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> In the above code, you can change the 1's to 2's and it is the setup for the second site. They do use the same certificate, which is why they are on different IP addresses. I also included the NameVirtualHost information at the top of the file: NameVirtualHost 127.0.0.1:80 NameVirtualHost 127.0.0.2:80 NameVirtualHost 127.0.0.1:443 NameVirtualHost 127.0.0.2:443 I can ping site1.local and site2.local. I can use telnet ( telnet site2.local 80 ) to get into both sites. But in Safari I can only get to the first site1.local - navigating to site2.local gives me either the localhost main page (which is included in the vhosts) or gives me a Access forbidden!. I am usure what to do, any suggestions would be awesome.

    Read the article

  • How to use the unit of work and repository patterns in a service oriented enviroment

    - by A. Karimi
    I've created an application framework using the unit of work and repository patterns for it's data layer. Data consumer layers such as presentation depend on the data layer design. For example a CRUD abstract form has a dependency to a repository (IRepository). This architecture works like a charm in client/server environments (Ex. a WPF application and a SQL Server). But I'm looking for a good pattern to change or reuse this architecture for a service oriented environment. Of course I have some ideas: Idea 1: The "Adapter" design pattern Keep the current architecture and create a new unit of work and repository implementation which can work with a service instead of the ORM. Data layer consumers are loosely coupled to the data layer so it's possible but the problem is about the unit of work; I have to create a context which tracks the objects state at the client side and sends the changes to the server side on calling the "Commit" (Something that I think the RIA has done for Silverlight). Here the diagram: ----------- CLIENT----------- | ------------------ SERVER ---------------------- [ UI ] -> [ UoW/Repository ] ---> [ Web Services ] -> [ UoW/Repository ] -> [DB] Idea 2: Add another layer Add another layer (let say "local services" or "data provider"), then put it between the data layer (unit of work and repository) and the data consumer layers (like UI). Then I have to rewrite the consumer classes (CRUD and other classes which are dependent to IRepository) to depend on another interface. And the diagram: ----------------- CLIENT ------------------ | ------------------- SERVER --------------------- [ UI ] -> [ Local Services/Data Provider ] ---> [ Web Services ] -> [ UoW/Repository ] -> [DB] Please note that I have the local services layer on the current architecture but it doesn't expose the data layer functionality. In another word the UI layer can communicate with both of the data and local services layers whereas the local services layer also uses the data layer. | | | | | | | | ---> | Local Services | ---> | | | UI | | | | Data | | | | | | | ----------------------------> | |

    Read the article

  • plesk 9 spamassassin server wide blacklist via cron?

    - by Kqk
    hi, we're running ubuntu 8.04 LTS and plesk 9.2 our simple task is to set up a periodic black list for spamassassin, e.g. using this script .. #!/bin/sh #! Script by AJR to update local spamassassin rules cd /tmp wget -c http://www.stearns.org/sa-blacklist/sa-blacklist.current mv sa-blacklist.current local.cf -f mv local.cf /etc/mail/spamassassin -f rm local.cf -f /etc/init.d/psa-spamassassin restart now, this script runs fine, but plesk doesn't seem to recognize the blacklist in its GUI. which is annoying, especially because plesk itself writes to /etc/mail/spamassassin/local.cf. i wasn't able to find out the secret place, where plesk distinguishes between entries in local.cf added via GUI and command line. any help is appreciated! thanks.

    Read the article

  • How to restart RoR services after server has been rebooted

    - by Alan DeLonga
    Update I have been searching around to see what services would possibly need to be restarted in my project after reboot. One of them was thinking sphinx, which I finally got to the point where it logs: [Fri Nov 16 19:34:29.820 2012] [29623] accepting connections But I still cant run searchd or searchd --stop because there was no generated sphinx.conf file in the etc/sphinxsearch for more info refer to this open thread on thinking_sphinx after reboot I then turned to looking into restarting unicorn or thin based on some insight I got. The issue is when I check my gems I see one for thin AND unicorn. But when I try to start either one of them they have no file residing in etc/init.d/ where the nginx and sphinxsearch files reside... Would rebooting totally erase the files for an app server like thin or unicorn? We are hosted on Rackspace running ruby 1.9.2p290 rails (3.2.8, 3.2.7, 3.2.0) nginx/1.1.19 notice that there are gems for unicorn and thin but there is no unicorn.rb or thin.rb in my config folder for my app... I am still super lost if any one can give me some insight on some steps to take to figure this out I would really appreciate it. Anything would help, thanks for reading. thin 1.4.1 unicorn 4.3.1 When I run unicorn I get the same issue as referenced here : > /usr/local/bin/unicorn start /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:610:in `parse_rackup_file': rackup file (start) not readable (ArgumentError) from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:76:in `reload' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/configurator.rb:67:in `initialize' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:104:in `new' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/lib/unicorn/http_server.rb:104:in `initialize' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `new' from /usr/local/lib/ruby/gems/1.9.1/gems/unicorn-4.3.1/bin/unicorn:121:in `<top (required)>' from /usr/local/bin/unicorn:19:in `load' from /usr/local/bin/unicorn:19:in `<main>' When I run thin it just opens a command line prompt... /usr/local/bin/thin start >> Using rack adapter Other gems: * LOCAL GEMS * actionmailer (3.2.8, 3.2.7, 3.2.0) actionpack (3.2.8, 3.2.7, 3.2.0) activemodel (3.2.8, 3.2.7, 3.2.0) activerecord (3.2.8, 3.2.7, 3.2.0) activeresource (3.2.8, 3.2.7, 3.2.0) activesupport (3.2.8, 3.2.7, 3.2.0) arel (3.0.2) builder (3.0.0) bundler (1.1.5) carmen (1.0.0.beta2) carmen-rails (1.0.0.beta3) cocaine (0.2.1) coffee-rails (3.2.2) coffee-script (2.2.0) coffee-script-source (1.3.3) daemons (1.1.9) erubis (2.7.0) eventmachine (0.12.10) execjs (1.4.0) faraday (0.8.4) faraday_middleware (0.8.8) foursquare2 (1.8.2) geokit (1.6.5) hashie (1.2.0) hike (1.2.1) httparty (0.8.3) httpauth (0.1) i18n (0.6.0) journey (1.0.4) jquery-rails (2.0.2) json (1.7.4, 1.7.3) jwt (0.1.5) kgio (2.7.4) lastfm (1.8.0) libv8 (3.3.10.4 x86_64-linux) mail (2.4.4) mime-types (1.19, 1.18) minitest (1.6.0) multi_json (1.3.6) multi_xml (0.5.1) multipart-post (1.1.5) mysql2 (0.3.11) oauth2 (0.8.0) paperclip (3.1.1) polyglot (0.3.3) rack (1.4.1) rack-cache (1.2) rack-ssl (1.3.2) rack-test (0.6.1) rails (3.2.8, 3.2.7, 3.2.0) railties (3.2.8, 3.2.7, 3.2.0) raindrops (0.10.0, 0.9.0) rake (0.9.2.2, 0.8.7) rdoc (3.12, 2.5.8) riddle (1.5.3) sass (3.2.0, 3.1.19) sass-rails (3.2.5) sprockets (2.1.3) sqlite3 (1.3.6) sqlite3-ruby (1.3.3) therubyracer (0.10.2, 0.10.1) thin (1.4.1) thinking-sphinx (2.0.10) thor (0.16.0, 0.15.4, 0.14.6) tilt (1.3.3) treetop (1.4.10) tzinfo (0.3.33) uglifier (1.2.7, 1.2.4) unicorn (4.3.1) xml-simple (1.1.1) I am working on a project that was built by another group. I made some modifications to a constants file in the config folder (changing some values for arrays that populated some drop down fields), but the app had to be rebooted before those changes would be recognized. The hosting is through Rackspace, we rebooted through the option on their site. I contacted them and checked the status of our server, the port is open and operational. The problem is the app is not running when you go to the address for the site. Then when I put in the ip address of the server it just says "Welcome to Nginx". But in a log files I see: [Thu Nov 15 02:34:37.945 2012] [15916] caught SIGTERM, shutting down [Thu Nov 15 02:34:37.996 2012] [15916] shutdown complete I am not very versed in server side set up. I have also never worked on a Rails project that had to have specific services started before the application will start. Any insight as to how to figure out what services need to be restarted and how to go about restarting them would be greatly appreciated. I feel kind of dead in the water at this point... Thanks, Alan

    Read the article

  • 500 Internal Server Error when setting up Apache on Ubuntu+Django

    - by ApacheQ
    I tried with Apache on ubuntu 9.04 and get the same error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. And my apache/error.log is: [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] ServerName: 'sapint2' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] DocumentRoot: '/etc/apache2/htdocs' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] URI: '/' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Location: '/' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Directory: None [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Filename: '/etc/apache2/htdocs' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] PathInfo: '/' [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] Traceback (most recent call last): [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/lib/python2.7/dist-packages/mod_python/importer.py", line 1537, in HandlerDispatch\n default=default_handler, arg=req, silent=hlist.silent) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/lib/python2.7/dist-packages/mod_python/importer.py", line 1229, in _process_target\n result = _execute_target(config, req, object, arg) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/lib/python2.7/dist-packages/mod_python/importer.py", line 1128, in _execute_target\n result = object(arg) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/modpython.py", line 180, in handler\n return ModPythonHandler()(req) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/modpython.py", line 142, in call\n self.load_middleware() [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py", line 45, in load_middleware\n mod = import_module(mw_module) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/utils/importlib.py", line 35, in import_module\n import(name) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/contrib/sessions/middleware.py", line 4, in \n from django.utils.cache import patch_vary_headers [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/utils/cache.py", line 25, in \n from django.core.cache import get_cache [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/cache/init.py", line 187, in \n cache = get_cache(DEFAULT_CACHE_ALIAS) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/cache/init.py", line 179, in get_cache\n cache = backend_cls(location, params) [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] File "/usr/local/lib/python2.7/dist-packages/django/core/cache/backends/memcached.py", line 139, in init\n "Memcached cache backend requires either the 'memcache' or 'cmemcache' library" [Sat Oct 06 09:32:04 2012] [error] [client 10.0.64.10] InvalidCacheBackendError: Memcached cache backend requires either the 'memcache' or 'cmemcache' library [Sat Oct 06 09:51:30 2012] [notice] caught SIGTERM, shutting down [Sat Oct 06 09:51:31 2012] [notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads. [Sat Oct 06 09:51:31 2012] [notice] mod_python: using mutex_directory /tmp [Sat Oct 06 09:51:31 2012] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.5-1ubuntu7.11 with Suhosin-Patch mod_python/3.3.1 Python/2.7.1+ mod_wsgi/3.3 configured -- resuming normal operations I need some help Thanks

    Read the article

  • Cannot authenticate to SBS 2003

    - by Lerp
    I am trying to connect my machine to my work's entirely windows network and I am having a few issues: Whenever I try to access the server, the authentication dialog just keeps popping back up. I cannot connect to the printers (it says connecting to device failed) I have tried setting up samba, winbind, kerberos, likewise open all to no avail. I have a feeling I am just setting them up wrong. My nautilus shows this when I go to Network Windows Network MASTERMAGNETS I can ping both MASTERMAGNETS.LOCAL and 192.168.0.2 after modifying my /etc/hosts james@jamesmaddison:~$ cat /etc/hosts 127.0.0.1 localhost jamesmaddison 192.168.0.2 MASTERMAGNETS.LOCAL 192.168.0.50 Sharp-Printer # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters I believe that's the correct domain (not sure if that's the correct term) as when I do nslookup MASTERMAGNETS.LOCAL I get the following: james@jamesmaddison:~$ nslookup MASTERMAGNETS.LOCAL Server: 192.168.0.2 Address: 192.168.0.2#53 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.3 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.2 It all worked fine before I reinstalled Ubuntu and now I just cannot get access to the server. All help is appreciated, I need to get this working or I fear I will be forced to develop in a windows environment :(

    Read the article

  • In Exim, is RBL spam rejected prior to being scanned by SpamAssassin?

    - by user955664
    I've recently been battling spam issues on our mail server. One account in particular was getting hammered with incoming spam. SpamAssassin's memory use is one of our concerns. What I've done is enable RBLs in Exim. I now see many rejection notices in the Exim log based on the various RBLs, which is good. However, when I run Eximstats, the numbers seem to be the same as they were prior to the enabling of the RBLs. I am assuming because the email is still logged in some way prior to the rejection. Is that what's happening, or am I missing something else? Does anyone know if these emails are rejected prior to being processed by SpamAssassin? Or does anyone know how I'd be able to find out? Is there a standard way to generate SpamAssassin stats, similar to Eximstats, so that I could compare the numbers? Thank you for your time and any advice. Edit: Here is the ACL section of my Exim configuration file ###################################################################### # ACLs # ###################################################################### begin acl # ACL that is used after the RCPT command check_recipient: # to block certain wellknown exploits, Deny for local domains if # local parts begin with a dot or contain @ % ! / | deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] # to restrict port 587 to authenticated users only # see also daemon_smtp_ports above accept hosts = +auth_relay_hosts condition = ${if eq {$interface_port}{587} {yes}{no}} endpass message = relay not permitted, authentication required authenticated = * # allow local users to send outgoing messages using slashes # and vertical bars in their local parts. # Block outgoing local parts that begin with a dot, slash, or vertical # bar but allows them within the local part. # The sequence \..\ is barred. The usage of @ % and ! is barred as # before. The motivation is to prevent your users (or their virii) # from mounting certain kinds of attacks on remote sites. deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ # local source whitelist # accept if the source is local SMTP (i.e. not over TCP/IP). # Test for this by testing for an empty sending host field. accept hosts = : # sender domains whitelist # accept if sender domain is in whitelist accept sender_domains = +whitelist_domains # sender hosts whitelist # accept if sender host is in whitelist accept hosts = +whitelist_hosts accept hosts = +whitelist_hosts_ip # envelope senders whitelist # accept if envelope sender is in whitelist accept senders = +whitelist_senders # accept mail to postmaster in any local domain, regardless of source accept local_parts = postmaster domains = +local_domains # accept mail to abuse in any local domain, regardless of source accept local_parts = abuse domains = +local_domains # accept mail to hostmaster in any local domain, regardless of source accept local_parts = hostmaster domains =+local_domains # OPTIONAL MODIFICATIONS: # If the page you're using to notify senders of blocked email of how # to get their address unblocked will use a web form to send you email so # you'll know to unblock those senders, then you may leave these lines # commented out. However, if you'll be telling your senders of blocked # email to send an email to [email protected], then you should # replace "errors" with the left side of the email address you'll be # using, and "example.com" with the right side of the email address and # then uncomment the second two lines, leaving the first one commented. # Doing this will mean anyone can send email to this specific address, # even if they're at a blocked domain, and even if your domain is using # blocklists. # accept mail to [email protected], regardless of source # accept local_parts = errors # domains = example.com # deny so-called "legal" spammers" deny message = Email blocked by LBL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains sender_domains = +blacklist_domains # deny using hostname in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts # deny using IP in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts_ip # deny using email address in blacklist_senders deny message = Email blocked by BSAL - to unblock see http://www.example.com/ domains = +use_rbl_domains senders = +blacklist_senders # By default we do NOT require sender verification. # Sender verification denies unless sender address can be verified: # If you want to require sender verification, i.e., that the sending # address is routable and mail can be delivered to it, then # uncomment the next line. If you do not want to require sender # verification, leave the line commented out #require verify = sender # deny using .spamhaus deny message = Email blocked by SPAMHAUS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = sbl.spamhaus.org # deny using ordb # deny message = Email blocked by ORDB - to unblock see http://www.example.com/ # # only for domains that do want to be tested against RBLs # domains = +use_rbl_domains # dnslists = relays.ordb.org # deny using sorbs smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = dnsbl.sorbs.net=127.0.0.5 # Next deny stuff from more "fuzzy" blacklists # but do bypass all checking for whitelisted host names # and for authenticated users # deny using spamcop deny message = Email blocked by SPAMCOP - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = bl.spamcop.net # deny using njabl deny message = Email blocked by NJABL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.njabl.org # deny using cbl deny message = Email blocked by CBL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = cbl.abuseat.org # deny using all other sorbs ip-based blocklist besides smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.sorbs.net!=127.0.0.6 # deny using sorbs name based list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ domains =+use_rbl_domains # rhsbl list is name based dnslists = rhsbl.sorbs.net/$sender_address_domain # accept if address is in a local domain as long as recipient can be verified accept domains = +local_domains endpass message = "Unknown User" verify = recipient # accept if address is in a domain for which we relay as long as recipient # can be verified accept domains = +relay_domains endpass verify=recipient # accept if message comes for a host for which we are an outgoing relay # recipient verification is omitted because many MUA clients don't cope # well with SMTP error responses. If you are actually relaying from MTAs # then you should probably add recipient verify here accept hosts = +relay_hosts accept hosts = +auth_relay_hosts endpass message = authentication required authenticated = * deny message = relay not permitted # default at end of acl causes a "deny", but line below will give # an explicit error message: deny message = relay not permitted # ACL that is used after the DATA command check_message: accept

    Read the article

  • why can't macports find make

    - by GeoffreyF67
    I am trying to run macports like thus: port install php5 When I do so, however, I get this error: Error: Unable to open port: can't read "build.cmd": Failed to locate 'make' in path: '/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin' or at its MacPorts configuration time location, did you move it? So I looked at my path: declare -x PATH="/Developer/usr/bin:/opt/subversion/bin:/opt/local/bin:/opt/local/sbin:/usr/local/php5/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin" and then looked to make sure make was in one of those dirs: ls -l /Developer/usr/bin/make $ lrwxr-xr-x 1 root admin 7 Aug 7 16:47 /Developer/usr/bin/make -> gnumake And typing: make produces: make: *** No targets specified and no makefile found. Stop. So I know that it's there. But macports can't find it. Any ideas? G-Man

    Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >