Search Results

Search found 24117 results on 965 pages for 'write through'.

Page 262/965 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Call For Papers Tips and Tricks

  - by speakjava

  This year's JavaOne session review has just been completed and by now everyone who submitted papers should know whether they were successful or not.  I had the pleasure again this year of leading the review of the 'JavaFX and Rich User Experiences' track.  I thought it would be useful to write up a few comments to help people in future when submitting session proposals, not just for JavaOne, but for any of the many developer conferences that run around the world throughout the year.  This also draws on conversations I recently had with various Java User Group leaders at the Oracle User Group summit in Riga.  Many of these leaders run some of the biggest and most successful Java conferences in Europe. Try to think of a title which will sound interesting.  For example, "Experiences of performance tuning embedded Java for an ARM architecture based single board computer" probably isn't going to get as much attention as "Do you like coffee with your dessert? Java on the Raspberry Pi".  When thinking of the subject and title for your talk try to steer clear of sessions that might be too generic (and so get lost in a group of similar sessions).  Introductory talks are great when the audience is new to a subject, but beware of providing sessions that are too basic when the technology has been around for a while and there are lots of tutorials already available on the web. JavaOne, like many other conferences has a number of fields that need to be filled in when submitting a paper.  Many of these are selected from pull-down lists (like which track the session is applicable to).  Check these lists carefully.  A number of sessions we had needed to be shuffled between tracks when it was thought that the one selected was not appropriate.  We didn't count this against any sessions, but it's always a good idea to try and get the right one from the start, just in case. JavaOne, again like many other conferences, has two fields that describe the session being submitted: abstract and summary.  These are the most critical to a successful submission.  The two fields have different names and that is significant; a frequent mistake people make is to write an abstract for a session and then duplicate it for the summary.  The abstract (at least in the case of JavaOne) is what gets printed in the show guide and is typically what will be used by attendees when deciding what sessions to attend.  This is where you need to sell your session, not just to the reviewers, but also the people who you want in your audience.  Submitting a one line abstract (unless it's a really good one line) is not usually enough to decide whether this is worth investing an hour of conference time.  The abstract typically has a limit of a few hundred characters.  Try to use as many of them as possible to get as much information about your session across.  The summary should be different from the abstract (and don't leave it blank as some people do).  This field is where you can give the reviewers more detail about things like the structure of the talk, possible demonstrations and so on.  As a reviewer I look to this section to help me decide whether the hard-sell of the title and abstract will actually be reflected in the final content.  Try to make this comprehensive, but don't make it excessively long.  When you have to review possibly hundreds of sessions a certain level of conciseness can make life easier for reviewers and help the cause of your session. If you've not made many submissions for talks in the past, or if this is your first, try to give reviewers places to find background on you as a presenter.  Having an active blog and Twitter handle can also help reviewers if they're not sure what your level of expertise is.  Many call-for-papers have places for you to include this type of information.  It's always good to have new and original presenters and presentations for conferences.  Hopefully these tips will help you be successful when you answer the next call-for-papers.

  Read the article

• How to automate a monitoring system for ETL runs

  - by Jeffrey McDaniel

  Upon completion of the Primavera ETL process there are a few ways to determine if the process finished successfully.  First, in the <installation directory>\log folder,  there is a staretlprocess.log and staretl.html files. These files will give the output results of the ETL run. The staretl.html file will give a detailed summary of each step of the process, its run time, and its status. The .log file, based on the logging level set in the Configuration tool, can give extensive information about the ETL process. The log file can be used as a validation for process completion.  To automate the monitoring of these log files, perform the following steps: 1. Write a custom application to parse through the log file and search for [ERROR] . In most cases,  a major [ERROR] could cause the ETL process to fail. Searching the log and finding this value is worthy of an alert. 2. Determine the total number of steps in the ETL process, and validate that the log file recorded and entry for the final step.  For example validate that your log file contains an entry for Step 39/39 (could be different based on the version you are running). If there is no Step 39/39, then either the process is taking longer than expected or it didn't make it to the end.  Either way this would be a good cause for an alert. 3. Check the last line in the log file. The last line of the log file should contain an indication that the ETL run completed successfully. For example, the last line of a log file will say (results could be different based on Reporting Database versions):   [INFO] (Message) Finished Writing Report 4. You could write an Ant script to execute the ETL process and have it set to - failonerror="true" - and from there send results to an external tool to monitor the jobs, send to email, or send to database. With each ETL run, the log file appends to the existing log file by default. Because of this behavior, I would recommend renaming the existing log files before running a new ETL process. By doing this,  only log entries for the currently running ETL process is recorded in the new log files. Based on these log entries, alerts can be setup to notify the administrator or DBA. Another way to determine if the ETL process has completed successfully is to monitor the etl_processmaster table.  Depending on the Reporting Database version this could be in the Stage or Star databases. As of Reporting Database 2.2 and higher this would be in the Star database.  The etl_processmaster table records entries for the ETL run along with a Start and Finish time.  If the ETl process has failed the Finish date should be null. This table can be queried at a time when ETL process is expected to be finished and if null send an alert.  These are just some options. There are additional ways this can be accomplished based around these two areas - log files or database. Here is an additional query to gather more information about your ETL run (connect as Staruser): SELECT SYSDATE,test_script,decode(loc, 0, PROCESSNAME, trim(SUBSTR(PROCESSNAME, loc+1))) PROCESSNAME ,duration duration from ( select (e.endtime - b.starttime) * 1440 duration, to_char(b.starttime, 'hh24:mi:ss') starttime, to_char(e.endtime, 'hh24:mi:ss') endtime,  b.PROCESSNAME, instr(b.PROCESSNAME, ']') loc, b.infotype test_script from ( select processid, infodate starttime, PROCESSNAME, INFOMSG, INFOTYPE from etl_processinfo  where processid = (select max(PROCESSID) from etl_processinfo) and infotype = 'BEGIN' ) b  inner Join ( select processid, infodate endtime, PROCESSNAME, INFOMSG, INFOTYPE from etl_processinfo  where processid = (select max(PROCESSID) from etl_processinfo) and infotype = 'END' ) e on b.processid = e.processid  and b.PROCESSNAME = e.PROCESSNAME order by b.starttime)

  Read the article

• How should I plan the inheritance structure for my game?

  - by Eric Thoma

  I am trying to write a platform shooter in C++ with a really good class structure for robustness. The game itself is secondary; it is the learning process of writing it that is primary. I am implementing an inheritance tree for all of the objects in my game, but I find myself unsure on some decisions. One specific issue that it bugging me is this: I have an Actor that is simply defined as anything in the game world. Under Actor is Character. Both of these classes are abstract. Under Character is the Philosopher, who is the main character that the user commands. Also under Character is NPC, which uses an AI module with stock routines for friendly, enemy and (maybe) neutral alignments. So under NPC I want to have three subclasses: FriendlyNPC, EnemyNPC and NeutralNPC. These classes are not abstract, and will often be subclassed in order to make different types of NPC's, like Engineer, Scientist and the most evil Programmer. Still, if I want to implement a generic NPC named Kevin, it would nice to be able to put him in without making a new class for him. I could just instantiate a FriendlyNPC and pass some values for the AI machine and for the dialogue; that would be ideal. But what if Kevin is the one benevolent Programmer in the whole world? Now we must make a class for him (but what should it be called?). Now we have a character that should inherit from Programmer (as Kevin has all the same abilities but just uses the friendly AI functions) but also should inherit from FriendlyNPC. Programmer and FriendlyNPC branched away from each other on the inheritance tree, so inheriting from both of them would have conflicts, because some of the same functions have been implemented in different ways on the two of them. 1) Is there a better way to order these classes to avoid these conflicts? Having three subclasses; Friendly, Enemy and Neutral; from each type of NPC; Engineer, Scientist, and Programmer; would amount to a huge number of classes. I would share specific implementation details, but I am writing the game slowly, piece by piece, and so I haven't implemented past Character yet. 2) Is there a place where I can learn these programming paradigms? I am already trying to take advantage of some good design patterns, like MVC architecture and Mediator objects. The whole point of this project is to write something in good style. It is difficult to tell what should become a subclass and what should become a state (i.e. Friendly boolean v. Friendly class). Having many states slows down code with if statements and makes classes long and unwieldy. On the other hand, having a class for everything isn't practical. 3) Are there good rules of thumb or resources to learn more about this? 4) Finally, where does templating come in to this? How should I coordinate templates into my class structure? I have never actually taken advantage of templating honestly, but I hear that it increases modularity, which means good code.

  Read the article

• Strings in .NET are Enumerable

  - by Scott Dorman

  It seems like there is always some confusion concerning strings in .NET. This is both from developers who are new to the Framework and those that have been working with it for quite some time. Strings in the .NET Framework are represented by the System.String class, which encapsulates the data manipulation, sorting, and searching methods you most commonly perform on string data. In the .NET Framework, you can use System.String (which is the actual type name or the language alias (for C#, string). They are equivalent so use whichever naming convention you prefer but be consistent. Common usage (and my preference) is to use the language alias (string) when referring to the data type and String (the actual type name) when accessing the static members of the class. Many mainstream programming languages (like C and C++) treat strings as a null terminated array of characters. The .NET Framework, however, treats strings as an immutable sequence of Unicode characters which cannot be modified after it has been created. Because strings are immutable, all operations which modify the string contents are actually creating new string instances and returning those. They never modify the original string data. There is one important word in the preceding paragraph which many people tend to miss: sequence. In .NET, strings are treated as a sequence…in fact, they are treated as an enumerable sequence. This can be verified if you look at the class declaration for System.String, as seen below: // Summary:// Represents text as a series of Unicode characters.public sealed class String : IEnumerable, IComparable, IComparable<string>, IEquatable<string> The first interface that String implements is IEnumerable, which has the following definition: // Summary:// Exposes the enumerator, which supports a simple iteration over a non-generic// collection.public interface IEnumerable{ // Summary: // Returns an enumerator that iterates through a collection. // // Returns: // An System.Collections.IEnumerator object that can be used to iterate through // the collection. IEnumerator GetEnumerator();} As a side note, System.Array also implements IEnumerable. Why is that important to know? Simply put, it means that any operation you can perform on an array can also be performed on a string. This allows you to write code such as the following: string s = "The quick brown fox";foreach (var c in s){ System.Diagnostics.Debug.WriteLine(c);}for (int i = 0; i < s.Length; i++){ System.Diagnostics.Debug.WriteLine(s[i]);} If you executed those lines of code in a running application, you would see the following output in the Visual Studio Output window: In the case of a string, these enumerable or array operations return a char (System.Char) rather than a string. That might lead you to believe that you can get around the string immutability restriction by simply treating strings as an array and assigning a new character to a specific index location inside the string, like this: string s = "The quick brown fox";s[2] = 'a';   However, if you were to write such code, the compiler will promptly tell you that you can’t do it: This preserves the notion that strings are immutable and cannot be changed once they are created. (Incidentally, there is no built in way to replace a single character like this. It can be done but it would require converting the string to a character array, changing the appropriate indexed location, and then creating a new string.)

  Read the article

• Running Powershell from within SharePoint

  - by Norgean

  Just because something is a daft idea, doesn't mean it can't be done. We sometimes need to do some housekeeping - like delete old files or list items or… yes, well, whatever you use Powershell for in a SharePoint world. Or it could be that your solution has "issues" for which you have Powershell solutions, but not the budget to transform into proper bug fixes. So you create a "how to" for the ITPro guys. Idea: What if we keep the scripts in a list, and have SharePoint execute the scripts on demand? An announcements list (because of the multiline body field). Warning! Let us be clear. This list needs to be locked down; if somebody creates a malicious script and you run it, I cannot help you. First; we need to figure out how to start Powershell scripts from C#. Hit teh interwebs and the Googlie, and you may find jpmik's post: http://www.codeproject.com/Articles/18229/How-to-run-PowerShell-scripts-from-C. (Or MS' official answer at http://msdn.microsoft.com/en-us/library/ee706563(v=vs.85).aspx) public string RunPowershell(string powershellText, SPWeb web, string param1, string param2) { // Powershell ~= RunspaceFactory - i.e. Create a powershell context var runspace = RunspaceFactory.CreateRunspace(); var resultString = new StringBuilder(); try { // load the SharePoint snapin - Note: you cannot do this in the script itself (i.e. add-pssnapin etc does not work) PSSnapInException snapInError; runspace.RunspaceConfiguration.AddPSSnapIn("Microsoft.SharePoint.PowerShell", out snapInError); runspace.Open(); // set a web variable. runspace.SessionStateProxy.SetVariable("webContext", web); // and some user defined parameters runspace.SessionStateProxy.SetVariable("param1", param1); runspace.SessionStateProxy.SetVariable("param2", param2); var pipeline = runspace.CreatePipeline(); pipeline.Commands.AddScript(powershellText); // add a "return" variable pipeline.Commands.Add("Out-String"); // execute! var results = pipeline.Invoke(); // convert the script result into a single string foreach (PSObject obj in results) { resultString.AppendLine(obj.ToString()); } } finally { // close the runspace runspace.Close(); } // consider logging the result. Or something. return resultString.ToString(); } Ok. We've written some code. Let us test it. var runner = new PowershellRunner(); runner.RunPowershellScript(@" $web = Get-SPWeb 'http://server/web' # or $webContext $web.Title = $param1 $web.Update() $web.Dispose() ", null, "New title", "not used"); Next step: Connect the code to the list, or more specifically, have the code execute on one (or several) list items. As there are more options than readers, I'll leave this as an exercise for the reader. Some alternatives: Create a ribbon button that calls RunPowershell with the body of the selected itemsAdd a layout pageSpecify list item from query string (possibly coupled with content editor webpart with html that links directly to this page with querystring)WebpartListing with an "execute" columnList with multiselect and an execute button Etc!Now that you have the code for executing powershell scripts, you can easily expand this into a timer job, which executes scripts at regular intervals. But if the previous solution was dangerous, this is even worse - the scripts will usually be run with one of the admin accounts, and can do pretty much anything...One more thing... Note that as this is running "consoleless" calls to Write-Host will fail. Two solutions; remove all output, or check if the script is run in a console-window or not.  if ($host.Name -eq "ConsoleHost") { Write-Host 'If I agreed with you we'd both be wrong' }

  Read the article

• Essbase BSO Data Fragmentation

  - by Ann Donahue

  Essbase BSO Data Fragmentation Data fragmentation naturally occurs in Essbase Block Storage (BSO) databases where there are a lot of end user data updates, incremental data loads, many lock and send, and/or many calculations executed.  If an Essbase database starts to experience performance slow-downs, this is an indication that there may be too much fragmentation.  See Chapter 54 Improving Essbase Performance in the Essbase DBA Guide for more details on measuring and eliminating fragmentation: http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/daprcset.html Fragmentation is likely to occur in the following situations: Read/write databases that users are constantly updating data Databases that execute calculations around the clock Databases that frequently update and recalculate dense members Data loads that are poorly designed Databases that contain a significant number of Dynamic Calc and Store members Databases that use an isolation level of uncommitted access with commit block set to zero There are two types of data block fragmentation Free space tracking, which is measured using the Average Fragmentation Quotient statistic. Block order on disk, which is measured using the Average Cluster Ratio statistic. Average Fragmentation Quotient The Average Fragmentation Quotient ratio measures free space in a given database.  As you update and calculate data, empty spaces occur when a block can no longer fit in its original space and will either append at the end of the file or fit in another empty space that is large enough.  These empty spaces take up space in the .PAG files.  The higher the number the more empty spaces you have, therefore, the bigger the .PAG file and the longer it takes to traverse through the .PAG file to get to a particular record.  An Average Fragmentation Quotient value of 3.174765 means the database is 3% fragmented with free space. Average Cluster Ratio Average Cluster Ratio describes the order the blocks actually exist in the database. An Average Cluster Ratio number of 1 means all the blocks are ordered in the correct sequence in the order of the Outline.  As you load data and calculate data blocks, the sequence can start to be out of order.  This is because when you write to a block it may not be able to place back in the exact same spot in the database that it existed before.  The lower this number the more out of order it becomes and the more it affects performance.  An Average Cluster Ratio value of 1 means no fragmentation.  Any value lower than 1 i.e. 0.01032828 means the data blocks are getting further out of order from the outline order. Eliminating Data Block Fragmentation Both types of data block fragmentation can be removed by doing a dense restructure or export/clear/import of the data.  There are two types of dense restructure: 1. Implicit Restructures Implicit dense restructure happens when outline changes are done using EAS Outline Editor or Dimension Build. Essbase restructures create new .PAG files restructuring the data blocks in the .PAG files. When Essbase restructures the data blocks, it regenerates the index automatically so that index entries point to the new data blocks. Empty blocks are NOT removed with implicit restructures. 2. Explicit Restructures Explicit dense restructure happens when a manual initiation of the database restructure is executed. An explicit dense restructure is a full restructure which comprises of a dense restructure as outlined above plus the removal of empty blocks Empty Blocks vs. Fragmentation The existence of empty blocks is not considered fragmentation.  Empty blocks can be created through calc scripts or formulas.  An empty block will add to an existing database block count and will be included in the block counts of the database properties.  There are no statistics for empty blocks.  The only way to determine if empty blocks exist in an Essbase database is to record your current block count, export the entire database, clear the database then import the exported data.  If the block count decreased, the difference is the number of empty blocks that had existed in the database.

  Read the article

• Deliberate Practice

  - by Jeff Foster

  It’s easy to assume, as software engineers, that there is little need to “practice” writing code. After all, we write code all day long! Just by writing a little each day, we’re constantly learning and getting better, right? Unfortunately, that’s just not true. Of course, developers do improve with experience. Each time we encounter a problem we’re more likely to avoid it next time. If we’re in a team that deploys software early and often, we hone and improve the deployment process each time we practice it. However, not all practice makes perfect. To develop true expertise requires a particular type of practice, deliberate practice, the only goal of which is to make us better programmers. Everyday software development has other constraints and goals, not least the pressure to deliver. We rarely get the chance in the course of a “sprint” to experiment with potential solutions that are outside our current comfort zone. However, if we believe that software is a craft then it’s our duty to strive continuously to raise the standard of software development. This requires specific and sustained efforts to get better at something we currently can’t do well (from Harvard Business Review July/August 2007). One interesting way to introduce deliberate practice, in a sustainable way, is the code kata. The term kata derives from martial arts and refers to a set of movements practiced either solo or in pairs. One of the better-known examples is the Bowling Game kata by Bob Martin, the goal of which is simply to write some code to do the scoring for 10-pin bowling. It sounds too easy, right? What could we possibly learn from such a simple example? Trust me, though, that it’s not as simple as five minutes of typing and a solution. Of course, we can reach a solution in a short time, but the important thing about code katas is that we explore each technique fully and in a controlled way. We tackle the same problem multiple times, using different techniques and making different decisions, understanding the ramifications of each one, and exploring edge cases. The short feedback loop optimizes opportunities to learn. Another good example is Conway’s Game of Life. It’s a simple problem to solve, but try solving it in a functional style. If you’re used to mutability, solving the problem without mutating state will push you outside of your comfort zone. Similarly, if you try to solve it with the focus of “tell-don’t-ask“, how will the responsibilities of each object change? As software engineers, we don’t get enough opportunities to explore new ideas. In the middle of a development cycle, we can’t suddenly start experimenting on the team’s code base. Code katas offer an opportunity to explore new techniques in a safe environment. If you’re still skeptical, my challenge to you is simply to try it out. Convince a willing colleague to pair with you and work through a kata or two. It only takes an hour and I’m willing to bet you learn a few new things each time. The next step is to make it a sustainable team practice. Start with an hour every Friday afternoon (after all who wants to commit code to production just before they leave for the weekend?) for month and see how that works out. Finally, consider signing up for the Global Day of Code Retreat. It’s like a daylong code kata, it’s on December 8th and there’s probably an event in your area!

  Read the article

• How much is a subscriber worth?

  - by Tom Lewin

  This year at Red Gate, we’ve started providing a way to back up SQL Azure databases and Azure storage. We decided to sell this as a service, instead of a product, which means customers only pay for what they use. Unfortunately for us, it makes figuring out revenue much trickier. With a product like SQL Compare, a customer pays for it, and it’s theirs for good. Sure, we offer support and upgrades, but, fundamentally, the sale is a simple, upfront transaction: we’ve made this product, you need this product, we swap product for money and everyone is happy. With software as a service, it isn’t that easy. The money and product don’t change hands up front. Instead, we provide a service in exchange for a recurring fee. We know someone buying SQL Compare will pay us $X, but we don’t know how long service customers will stay with us, or how much they will spend. How do we find this out? We use lifetime value analysis. What is lifetime value? Lifetime value, or LTV, is how much a customer is worth to the business. For Entrepreneurs has a brilliant write up that we followed to conduct our analysis. Basically, it all boils down to this equation: LTV = ARPU x ALC To make it a bit less of an alphabet-soup and a bit more understandable, we can write it out in full: The lifetime value of a customer equals the average revenue per customer per month, times the average time a customer spends with the service Simple, right? A customer is worth the average spend times the average stay. If customers pay on average $50/month, and stay on average for ten months, then a new customer will, on average, bring in $500 over the time they are a customer! Average spend is easy to work out; it’s revenue divided by customers. The problem comes when we realise that we don’t know exactly how long a customer will stay with us. How can we figure out the average lifetime of a customer, if we only have six months’ worth of data? The answer lies in the fact that: Average Lifetime of a Customer = 1 / Churn Rate The churn rate is the percentage of customers that cancel in a month. If half of your customers cancel each month, then your average customer lifetime is two months. The problem we faced was that we didn’t have enough data to make an estimate of one month’s cancellations reliable (because barely anybody cancels)! To deal with this data problem, we can take data from the last three months instead. This means we have more data to play with. We can still use the equation above, we just need to multiply the final result by three (as we worked out how many three month periods customers stay for, and we want our answer to be in months). Now these estimates are likely to be fairly unreliable; when there’s not a lot of data it pays to be cautious with inference. That said, the numbers we have look fairly consistent, and it’s super easy to revise our estimates when new data comes in. At the very least, these numbers give us a vague idea of whether a subscription business is viable. As far as Cloud Services goes, the business looks very viable indeed, and the low cancellation rates are much more than just data points in LTV equations; they show that the product is working out great for our customers, which is exactly what we’re looking for!

  Read the article

• Looking for a real-world example illustrating that composition can be superior to inheritance

  - by Job

  I watched a bunch of lectures on Clojure and functional programming by Rich Hickey as well as some of the SICP lectures, and I am sold on many concepts of functional programming. I incorporated some of them into my C# code at a previous job, and luckily it was easy to write C# code in a more functional style. At my new job we use Python and multiple inheritance is all the rage. My co-workers are very smart but they have to produce code fast given the nature of the company. I am learning both the tools and the codebase, but the architecture itself slows me down as well. I have not written the existing class hierarchy (neither would I be able to remember everything about it), and so, when I started adding a fairly small feature, I realized that I had to read a lot of code in the process. At the surface the code is neatly organized and split into small functions/methods and not copy-paste-repetitive, but the flip side of being not repetitive is that there is some magic functionality hidden somewhere in the hierarchy chain that magically glues things together and does work on my behalf, but it is very hard to find and follow. I had to fire up a profiler and run it through several examples and plot the execution graph as well as step through a debugger a few times, search the code for some substring and just read pages at the time. I am pretty sure that once I am done, my resulting code will be short and neatly organized, and yet not very readable. What I write feels declarative, as if I was writing an XML file that drives some other magic engine, except that there is no clear documentation on what the XML should look like and what the engine does except for the existing examples that I can read as well as the source code for the 'engine'. There has got to be a better way. IMO using composition over inheritance can help quite a bit. That way the computation will be linear rather than jumping all over the hierarchy tree. Whenever the functionality does not quite fit into an inheritance model, it will need to be mangled to fit in, or the entire inheritance hierarchy will need to be refactored/rebalanced, sort of like an unbalanced binary tree needs reshuffling from time to time in order to improve the average seek time. As I mentioned before, my co-workers are very smart; they just have been doing things a certain way and probably have an ability to hold a lot of unrelated crap in their head at once. I want to convince them to give composition and functional as opposed to OOP approach a try. To do that, I need to find some very good material. I do not think that a SCIP lecture or one by Rich Hickey will do - I am afraid it will be flagged down as too academic. Then, simple examples of Dog and Frog and AddressBook classes do not really connivence one way or the other - they show how inheritance can be converted to composition but not why it is truly and objectively better. What I am looking for is some real-world example of code that has been written with a lot of inheritance, then hit a wall and re-written in a different style that uses composition. Perhaps there is a blog or a chapter. I am looking for something that can summarize and illustrate the sort of pain that I am going through. I already have been throwing the phrase "composition over inheritance" around, but it was not received as enthusiastically as I had hoped. I do not want to be perceived as a new guy who likes to complain and bash existing code while looking for a perfect approach while not contributing fast enough. At the same time, my gut is convinced that inheritance is often the instrument of evil and I want to show a better way in a near future. Have you stumbled upon any great resources that can help me?

  Read the article

• Cleaner ClientID's with ASP.NET 4.0

  - by amaniar

  Normal 0 false false false EN-US X-NONE HI /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; mso-bidi-font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} A common complain we have had when using ASP.NET web forms is the inability to control the ID attributes being rendered in the HTML markup when using server controls. Our Interface Engineers want to be able to predict the ID’s of controls thereby having more control over their client side code for selecting/manipulating elements by ID or using CSS to target them. While playing with the just released VS2010 and .NET 4.0 I discovered some real cool improvements. One of them is the ability to now have full control over the ID being rendered for server controls. ASP.NET 4.0 controls now have a new ClientIDMode property which gives the developer complete control over the ID’s being rendered making it easy to write JavaScript and CSS against the rendered html. By default the ClientIDMode is set to Predictable which results in clean and predictable ID’s by concatenating the ID’s of the Parent and child controls. So the following markup: <asp:Content ID="ParentContainer" ContentPlaceHolderID="MainContentPlaceHolder" runat="server">     <asp:Label runat="server" ID="MyLabel">My Label</asp:Label> </asp:Content>                                                                                                                                                             Will render:   <span id="ParentContainer_MyLabel">My Label</span> Instead of something like this: (current) <span id="ct100_ParentContainer_MyLabel">My Label</span> Other modes include AutoID (renders ID’s like it currently does in .NET 3.5), Static (renders the ID exactly as specified in the code) and Inherit (defers the mode to the parent control). So now I can write my jQuery selector as: $(“ParentContainer_MyLabel”).text(“My new Text”); Instead of: $(‘<%=this. MyLabel.ClientID%>’).text(“My new Text”); Scott Mitchell has a great article about this new feature: http://bit.ly/ailEJ2 Am excited about this and some other improvements. Many thanks to the ASP.NET team for Listening!

  Read the article

• What are they buying &ndash; work or value?

  - by Jamie Kurtz

  When was the last time you ordered a pizza like this: “I want the high school kid in the back to do the following… make a big circle with some dough, curl up the edges, then put some sauce on it using a small ladle, then I want him to take a handful of shredded cheese from the metal container and spread it over the circle and sauce, then finally I want the kid to place 36 pieces of pepperoni over the top of the cheese” ?? Probably never. My typical pizza order usually goes more like this: “I want a large pepperoni pizza”. In the world of software development, we try so hard to be all things agile. We: Write lots of unit tests We refactor our code, then refactor it some more We avoid writing lengthy requirements documents We try to keep processes to a minimum, and give developers freedom And we are proud of our constantly shifting focus (i.e. we’re “responding to change”) Yet, after all this, we fail to really lean and capitalize on one of agile’s main differentiators (from the twelve principles behind the Agile Manifesto): “Working software is the primary measure of progress.” That is, we foolishly commit to delivering tasks instead of features and bug fixes. Like my pizza example above, we fall into the trap of signing contracts that bind us to doing tasks – rather than delivering working software. And the biggest problem here… by far the most troubling outcome… is that we don’t let working software be a major force in all the work we do. When teams manage to ruthlessly focus on the end product, it puts them on the path of true agile. It doesn’t let them accidentally write too much documentation, or spend lots of time and money on processes and fancy tools. It forces early testing that reveals problems in the feature or bug fix. And it forces lots and lots of customer interaction.  Without that focus on the end product as your deliverable… by committing to a list of tasks instead of a list features and bug fixes… you are doomed to NOT be agile. You will end up just doing stuff, spending time on the keyboard, burning time on timesheets. Doing tasks doesn’t force you to minimize documentation. It makes it much harder to respond to change. And it will eventually force you and the client into contract haggling. Because the customer isn’t really paying you to do stuff. He’s ultimately paying for features and bug fixes. And when the customer doesn’t get what they want, responding with “well, look at the contract - we did all the tasks we committed to” doesn’t typically generate referrals or callbacks. In short, if you’re trying to deliver real value to the customer by going agile, you will most certainly fail if all you commit to is a list of things you’re going to do. Give agile what it needs by committing to features and bug fixes – not a list of ToDo items. So the next time you are writing up a contract, remember that the customer should be buying this: Not this:

  Read the article

• Why Apple’s New SDK Limitation is So Offensive

  - by TStewartDev

  I am not an Apple fanboy, nor have I ever been. However, I have owned a Mac, an iPod, and an iPhone in my lifetime, and for more than a decade, I have defended Apple against the untruths that the haters so enjoy spewing. I encouraged my wife to buy a MacBook when she needed a new laptop two years ago, and I often recommend them to my friends and relatives. I have proudly and happily used my first generation iPhone for nearly three years. Now, for the first time in well over ten years, I find myself ready to swear off Apple and encourage everyone I know to do the same. I was disappointed when Apple wouldn't allow native apps, but I still bought the iPhone. I've stomached their ambiguous app approval process even though it's apparent that Steve may just reject your app because he doesn't like you or feels threatened by you (I'm still lamenting the rejection of the Google Voice app). But, as a developer, I can no longer tolerate Apple's terms and the kind of totalitarian control they indicate Apple wants. In case you are not already familiar, Apple has dictated in their OS 4.0 SDK license agreement (the now infamous Section 3.3.1) that all apps developed for the iPhone must be coded in C, C++, or Objective C, and moreover, that using any cross-compiling platforms is a violation of the agreement. For those of you who aren't developers, let me try to illustrate why this angers those of us who are. Imagine you're a professional writer. You've had articles published in some journals and magazines, and you've got a couple popular books out there, too. You've got an idea for a new book, and so you take it to your publisher. Your publisher agrees that it's a good idea. "But," says the publisher, "we want to hold our books to a tighter standard so that our readers get the experience we want them to have. Therefore, from now on, all our writers may only use words from this list of the 10,000 most common English words. Furthermore, if you cite any other works or quote anyone, they must comply with that same list, or you'll have to rewrite the entire work as well in case our readers want to look up your citation." What do you do? If your work is a children's book, this probably isn't a big deal to you. If it's an autobiography, textbook, or even a novel, though, you're going to have a lot of trouble describing your content with only common words. It's going to take you longer to complete your book, too, since you'll be looking up less common words frequently to see if you can use them. You could always go to another publisher, but this one has the best ability to distribute your book. The next largest distributor can only do a quarter as much. You could abandon the project altogether, but then everyone loses. Isn't this a silly scenario? Who would put such a limitation on writers? Yet this is very much what Apple is doing. They are using their dominant position in the market to coerce developers to write their apps exclusively for the iPhone OS by making it too expensive to write for multiple platforms. It is at least a threefold attack, striking at Adobe who is set to release a compiler that lets Flash source be compiled to iPhone binaries; striking at Google whose Android platform stands the best chance at the moment of providing serious competition to the iPhone; and reinforcing their own strong position by keeping popular apps exclusively to iPhone. And while developers are already very upset about this, the sad fact is that most of us will cave and give in to Apple because consumers don't know any better. They will continue to buy Apple's toy forcing developers to play Apple's maniacal game in order to make any money, at least until Steve Jobs decides he doesn't like them or he intends to release a competing application (bye-bye OpenFeint). Apple has been kept in check on the desktop front by a very dominant Microsoft, but I'm afraid that their success with iPods, iTunes, and iPhones has created a monster that we may have to bear until it is slain by an anti-trust suit or dies with the retirement of Steve Jobs.

  Read the article

• Some PowerShell goodness

  - by KyleBurns

  Ever work somewhere where processes dump files into folders to maintain an archive?  Me too and Windows Explorer hates it.  Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job.  These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp.  The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died.  So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it.  The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long.  Here's the code with discussion following: param(     [Parameter(         Mandatory = $false,         Position = 0,         HelpMessage = "Root of the folders or share to archive.  Be sure to end with appropriate path separator"     )]     [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\",       [Parameter(         Mandatory = $false,         Position = 1     )]     [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{     [string]$year=$([string]$_.lastwritetime.year)     [string]$month=$_.lastwritetime.month     [string]$day=$_.lastwritetime.day     $dir=$folderRoot+$year+"\"+$month+"\"+$day     if(!(test-path $dir)){         new-item -type container $dir     }     Write-output $_     move-item $_.fullname $dir } The script starts by declaring two parameters.  The first parameter holds the path to the folder that I am going to be sorting into subdirectories.  The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries.  The second parameter holds a minimum age in days for files to be removed from the root folder.  The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp.  For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist.  Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call.  In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

  Read the article

• What Counts For a DBA – Depth

  - by Louis Davidson

  SQL Server offers very simple interfaces to many of its features. Most people could open up SSMS, connect to a server, write a simple query and see the results. Even several of the core DBA tasks are deceptively straightforward. It doesn’t take a rocket scientist to perform a basic database backup or run a trace (even using the newfangled Extended Events!). However, appearances can be deceptive, and often times it is really important that a DBA understands not just the basics of how to perform a task, but why we do a task, and how that task works. As an analogy, consider a child walking into a darkened room. Most would know that they need to turn on the light, and how to do it, so they flick the switch. But what happens if light fails to shine forth. Most would immediately tell you that you need to consider changing the light bulb. So you hop in the car and take them to the local home store and instruct them to buy a replacement. Confronted with a 40 foot display of light bulbs, how will they decide which of the hundreds of types of bulbs, of different types, fittings, shapes, colors, power and efficiency ratings, is the right choice? Obviously the main lesson the child is going to learn this day is how to use their cell phone as a flashlight so they don’t have to ask for help the next time. Likewise, when the metaphorical toddlers who use your database server have issues, they will instinctively know something is wrong, and may even have some idea what caused it, but will have no depth of knowledge to figure out the right solution. That is where the DBA comes in and attempts to save the day. However, when one looks beneath the shiny UI, SQL Server has its own “40 foot display of light bulbs”, in the form of the tremendous number of tools and the often-bewildering amount of information they can present to the DBA, to help us find issues. Unfortunately, resorting to guesswork, to trying different “bulbs” over and over, hoping to stumble on the answer. This is where the right depth of knowledge goes a long way. If we need to write a SELECT statement, then knowing the syntax and where to find the data is not enough. Knowledge of indexes and query plans is essential. Without it, we might hit on a query that “works”, but we are basically still a user, not a programmer, because we have no real control over our platform. Is that level of knowledge deep enough? Probably not, since knowledge of the underlying metadata and structures would be very useful in helping us make sense of any query plan. Understanding the structure of an index makes the “key lookup” operator not sound like what you do when someone tapes your car key to the ceiling. So is even this level of understanding deep enough? Do we need to understand the memory architecture used to process the query? It might be a comforting level of knowledge, and will doubtless come in handy at some point, but is not strictly necessary in most cases. Beyond that lies (more or less) full knowledge of SQL language and the intricacies of every step the SQL Server engine takes to process our query. My personal theory is that, as a professional, our knowledge of a given task should extend, at a minimum, one level deeper than is strictly necessary to perform the task. Anything deeper can be left to the ridiculously smart, or obsessive, or both. As an example. tasked with storing an integer value between 0 and 99999999, it’s essential that I know that choosing an Integer over Decimal(8,0) will likely offer performance benefits. It is then useful that I also understand the value of adding a CHECK constraint, to make sure the values are valid to the desired range; and comforting that I know a little about the underlying processors, registers and computer math. Anything further, I leave to the likes of Joe Chang, whose recent blog post on the topic offers depth by the bucketful!  

  Read the article

• Can you/should you develop components for ASP.NET MVC?

  - by Vilx-

  Following from the previous question I've started to wonder - is it possible to implement "Components" in ASP.NET MVC (latest version)? And should you? Let's clarify what I mean with a "component". With that I mean a "control" (aka "widget"), similar to those that ASP.NET webforms is built upon. A gridview might be a good example. In webforms I can place on my form a datasource component (one line of code), a gridview component (another line of code) and bind them together (specify an attribute on the gridview). In the codebehind file I fill the datasource with data (a few lines of DB-querying code), and I'm all set. At this point the gridview is a fully functional standalone component. I can open the form, and I'll see all the data. I can sort it by clicking on the column headers; it is split into several pages; I can drag the column headers around and rearrange columns; I can turn on "grouping" mode; etc. And I don't need to write another line of code for any of it. The gridview, as a component, already has all the code tucked away in its classes and assemblies. I just place it on the form, initialize it, and it Just Works. At some times (like sorting or navigation to a different page) it will also perform ajax callbacks to the server, but those too will be handled internally, with my code having no knowledge at all about it. And then there are also events that I can attach if I want to get notified when something happens. In MVC I cannot see a way of doing this cleanly. Sure, there are the partial views, but those only handle half of the problem - they render the initial HTML. Some more can be achieved with client-side Javascript (like column re-arranging), but when the grid needs to do an ajax callback (say, to fetch the next page of data), my code will have to get involved and process that request. At best I guess I can provide some helper methods to process it, but I'll have to write the code that calls them, and also provide a controller method with signature matching the arguments of that callback. I guess that I could make some hacks with global events or special routes or something, but that just seems... hackish. Unelegant. Perhaps this is not the MVC way? Although I've completed one project in it, I'm still far from being an MVC expert. But then what is? In the intranet application that we're building there are dozens upon dozens of such grids. Naturally I want them all to have a unified look & behavior, and I don't want to repeat the same code all over the place. So what's the "MVC" approach to this problem?

  Read the article

• Loading jQuery Consistently in a .NET Web App

  - by Rick Strahl

  One thing that frequently comes up in discussions when using jQuery is how to best load the jQuery library (as well as other commonly used and updated libraries) in a Web application. Specifically the issue is the one of versioning and making sure that you can easily update and switch versions of script files with application wide settings in one place and having your script usage reflect those settings in the entire application on all pages that use the script. Although I use jQuery as an example here, the same concepts can be applied to any script library - for example in my Web libraries I use the same approach for jQuery.ui and my own internal jQuery support library. The concepts used here can be applied both in WebForms and MVC. Loading jQuery Properly From CDN Before we look at a generic way to load jQuery via some server logic, let me first point out my preferred way to embed jQuery into the page. I use the Google CDN to load jQuery and then use a fallback URL to handle the offline or no Internet connection scenario. Why use a CDN? CDN links tend to be loaded more quickly since they are very likely to be cached in user's browsers already as jQuery CDN is used by many, many sites on the Web. Using a CDN also removes load from your Web server and puts the load bearing on the CDN provider - in this case Google - rather than on your Web site. On the downside, CDN links gives the provider (Google, Microsoft) yet another way to track users through their Web usage. Here's how I use jQuery CDN plus a fallback link on my WebLog for example: <!DOCTYPE HTML> <html> <head> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> <script> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript " + "src='/Weblog/wwSC.axd?r=Westwind.Web.Controls.Resources.jquery.js' %3E%3C/script%3E")); </script> <title>Rick Strahl's Web Log</title> ... </head>   You can see that the CDN is referenced first, followed by a small script block that checks to see whether jQuery was loaded (jQuery object exists). If it didn't load another script reference is added to the document dynamically pointing to a backup URL. In this case my backup URL points at a WebResource in my Westwind.Web  assembly, but the URL can also be local script like src="/scripts/jquery.min.js". Important: Use the proper Protocol/Scheme for  for CDN Urls [updated based on comments] If you're using a CDN to load an external script resource you should always make sure that the script is loaded with the same protocol as the parent page to avoid mixed content warnings by the browser. You don't want to load a script link to an http:// resource when you're on an https:// page. The easiest way to use this is by using a protocol relative URL: <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> which is an easy way to load resources from other domains. This URL syntax will automatically use the parent page's protocol (or more correctly scheme). As long as the remote domains support both http:// and https:// access this should work. BTW this also works in CSS (with some limitations) and links. BTW, I didn't know about this until it was pointed out in the comments. This is a very useful feature for many things - ah the benefits of my blog to myself :-) Version Numbers When you use a CDN you notice that you have to reference a specific version of jQuery. When using local files you may not have to do this as you can rename your private copy of jQuery.js, but for CDN the references are always versioned. The version number is of course very important to ensure you getting the version you have tested with, but it's also important to the provider because it ensures that cached content is always correct. If an existing file was updated the updates might take a very long time to get past the locally cached content and won't refresh properly. The version number ensures you get the right version and not some cached content that has been changed but not updated in your cache. On the other hand version numbers also mean that once you decide to use a new version of the script you now have to change all your script references in your pages. Depending on whether you use some sort of master/layout page or not this may or may not be easy in your application. Even if you do use master/layout pages, chances are that you probably have a few of them and at the very least all of those have to be updated for the scripts. If you use individual pages for all content this issue then spreads to all of your pages. Search and Replace in Files will do the trick, but it's still something that's easy to forget and worry about. Personaly I think it makes sense to have a single place where you can specify common script libraries that you want to load and more importantly which versions thereof and where they are loaded from. Loading Scripts via Server Code Script loading has always been important to me and as long as I can remember I've always built some custom script loading routines into my Web frameworks. WebForms makes this fairly easy because it has a reasonably useful script manager (ClientScriptManager and the ScriptManager) which allow injecting script into the page easily from anywhere in the Page cycle. What's nice about these components is that they allow scripts to be injected by controls so components can wrap up complex script/resource dependencies more easily without having to require long lists of CSS/Scripts/Image includes. In MVC or pure script driven applications like Razor WebPages  the process is more raw, requiring you to embed script references in the right place. But its also more immediate - it lets you know exactly which versions of scripts to use because you have to manually embed them. In WebForms with different controls loading resources this often can get confusing because it's quite possible to load multiple versions of the same script library into a page, the results of which are less than optimal… In this post I look a simple routine that embeds jQuery into the page based on a few application wide configuration settings. It returns only a string of the script tags that can be manually embedded into a Page template. It's a small function that merely a string of the script tags shown at the begging of this post along with some options on how that string is comprised. You'll be able to specify in one place which version loads and then all places where the help function is used will automatically reflect this selection. Options allow specification of the jQuery CDN Url, the fallback Url and where jQuery should be loaded from (script folder, Resource or CDN in my case). While this is specific to jQuery you can apply this to other resources as well. For example I use a similar approach with jQuery.ui as well using practically the same semantics. Providing Resources in ControlResources In my Westwind.Web Web utility library I have a class called ControlResources which is responsible for holding resource Urls, resource IDs and string contants that reference those resource IDs. The library also provides a few helper methods for loading common scriptscripts into a Web page. There are specific versions for WebForms which use the ClientScriptManager/ScriptManager and script link methods that can be used in any .NET technology that can embed an expression into the output template (or code for that matter). The ControlResources class contains mostly static content - references to resources mostly. But it also contains a few static properties that configure script loading: A Script LoadMode (CDN, Resource, or script url) A default CDN Url A fallback url They are  static properties in the ControlResources class: public class ControlResources { /// <summary> /// Determines what location jQuery is loaded from /// </summary> public static JQueryLoadModes jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryCdnUrl = "//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryUiCdnUrl = "//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"; /// <summary> /// jQuery UI fallback Url if CDN is unavailable or WebResource is used /// Note: The file needs to exist and hold the minimized version of jQuery ui /// </summary> public static string jQueryUiLocalFallbackUrl = "~/scripts/jquery-ui.min.js"; } These static properties are fixed values that can be changed at application startup to reflect your preferences. Since they're static they are application wide settings and respected across the entire Web application running. It's best to set these default in Application_Init or similar startup code if you need to change them for your application: protected void Application_Start(object sender, EventArgs e) { // Force jQuery to be loaded off Google Content Network ControlResources.jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; // Allow overriding of the Cdn url ControlResources.jQueryCdnUrl = "http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"; // Route to our own internal handler App.OnApplicationStart(); } With these basic settings in place you can then embed expressions into a page easily. In WebForms use: <!DOCTYPE html> <html> <head runat="server"> <%= ControlResources.jQueryLink() %> <script src="scripts/ww.jquery.min.js"></script> </head> In Razor use: <!DOCTYPE html> <html> <head> @Html.Raw(ControlResources.jQueryLink()) <script src="scripts/ww.jquery.min.js"></script> </head> Note that in Razor you need to use @Html.Raw() to force the string NOT to escape. Razor by default escapes string results and this ensures that the HTML content is properly expanded as raw HTML text. Both the WebForms and Razor output produce: <!DOCTYPE html> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript src='/WestWindWebToolkitWeb/WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634535391996872492' type='text/javascript'%3E%3C/script%3E"));</script> <script src="scripts/ww.jquery.min.js"></script> </head> which produces the desired effect for both CDN load and fallback URL. The implementation of jQueryLink is pretty basic of course: /// <summary> /// Inserts a script link to load jQuery into the page based on the jQueryLoadModes settings /// of this class. Default load is by CDN plus WebResource fallback /// </summary> /// <param name="url"> /// An optional explicit URL to load jQuery from. Url is resolved. /// When specified no fallback is applied /// </param> /// <returns>full script tag and fallback script for jQuery to load</returns> public static string jQueryLink(JQueryLoadModes jQueryLoadMode = JQueryLoadModes.Default, string url = null) { string jQueryUrl = string.Empty; string fallbackScript = string.Empty; if (jQueryLoadMode == JQueryLoadModes.Default) jQueryLoadMode = ControlResources.jQueryLoadMode; if (!string.IsNullOrEmpty(url)) jQueryUrl = WebUtils.ResolveUrl(url); else if (jQueryLoadMode == JQueryLoadModes.WebResource) { Page page = new Page(); jQueryUrl = page.ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); } else if (jQueryLoadMode == JQueryLoadModes.ContentDeliveryNetwork) { jQueryUrl = ControlResources.jQueryCdnUrl; if (!string.IsNullOrEmpty(jQueryCdnUrl)) { // check if jquery loaded - if it didn't we're not online and use WebResource fallbackScript = @"<script type=""text/javascript"">if (typeof(jQuery) == 'undefined') document.write(unescape(""%3Cscript src='{0}' type='text/javascript'%3E%3C/script%3E""));</script>"; fallbackScript = string.Format(fallbackScript, WebUtils.ResolveUrl(ControlResources.jQueryCdnFallbackUrl)); } } string output = "<script src=\"" + jQueryUrl + "\" type=\"text/javascript\"></script>"; // add in the CDN fallback script code if (!string.IsNullOrEmpty(fallbackScript)) output += "\r\n" + fallbackScript + "\r\n"; return output; } There's one dependency here on WebUtils.ResolveUrl() which resolves Urls without access to a Page/Control (another one of those features that should be in the runtime, not in the WebForms or MVC engine). You can see there's only a little bit of logic in this code that deals with potentially different load modes. I can load scripts from a Url, WebResources or - my preferred way - from CDN. Based on the static settings the scripts to embed are composed to be returned as simple string <script> tag(s). I find this extremely useful especially when I'm not connected to the internet so that I can quickly swap in a local jQuery resource instead of loading from CDN. While CDN loading with the fallback works it can be a bit slow as the CDN is probed first before the fallback kicks in. Switching quickly in one place makes this trivial. It also makes it very easy once a new version of jQuery rolls around to move up to the new version and ensure that all pages are using the new version immediately. I'm not trying to make this out as 'the' definite way to load your resources, but rather provide it here as a pointer so you can maybe apply your own logic to determine where scripts come from and how they load. You could even automate this some more by using configuration settings or reading the locations/preferences out of some sort of data/metadata store that can be dynamically updated instead via recompilation. FWIW, I use a very similar approach for loading jQuery UI and my own ww.jquery library - the same concept can be applied to any kind of script you might be loading from different locations. Hopefully some of you find this a useful addition to your toolset. Resources Google CDN for jQuery Full ControlResources Source Code ControlResource Documentation Westwind.Web NuGet This method is part of the Westwind.Web library of the West Wind Web Toolkit or you can grab the Web library from NuGet and add to your Visual Studio project. This package includes a host of Web related utilities and script support features. © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  jQuery   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Announcing the Release of Visual Studio 2013 and Great Improvements to ASP.NET and Entity Framework

  - by ScottGu

  Today we released VS 2013 and .NET 4.5.1. These releases include a ton of great improvements, and include some fantastic enhancements to ASP.NET and the Entity Framework.  You can download and start using them now. Below are details on a few of the great ASP.NET, Web Development, and Entity Framework improvements you can take advantage of with this release.  Please visit http://www.asp.net/vnext for additional release notes, documentation, and tutorials. One ASP.NET With the release of Visual Studio 2013, we have taken a step towards unifying the experience of using the different ASP.NET sub-frameworks (Web Forms, MVC, Web API, SignalR, etc), and you can now easily mix and match the different ASP.NET technologies you want to use within a single application. When you do a File-New Project with VS 2013 you’ll now see a single ASP.NET Project option: Selecting this project will bring up an additional dialog that allows you to start with a base project template, and then optionally add/remove the technologies you want to use in it.  For example, you could start with a Web Forms template and add Web API or Web Forms support for it, or create a MVC project and also enable Web Forms pages within it: This makes it easy for you to use any ASP.NET technology you want within your apps, and take advantage of any feature across the entire ASP.NET technology span. Richer Authentication Support The new “One ASP.NET” project dialog also includes a new Change Authentication button that, when pushed, enables you to easily change the authentication approach used by your applications – and makes it much easier to build secure applications that enable SSO from a variety of identity providers.  For example, when you start with the ASP.NET Web Forms or MVC templates you can easily add any of the following authentication options to the application: No Authentication Individual User Accounts (Single Sign-On support with FaceBook, Twitter, Google, and Microsoft ID – or Forms Auth with ASP.NET Membership) Organizational Accounts (Single Sign-On support with Windows Azure Active Directory ) Windows Authentication (Active Directory in an intranet application) The Windows Azure Active Directory support is particularly cool.  Last month we updated Windows Azure Active Directory so that developers can now easily create any number of Directories using it (for free and deployed within seconds).  It now takes only a few moments to enable single-sign-on support within your ASP.NET applications against these Windows Azure Active Directories.  Simply choose the “Organizational Accounts” radio button within the Change Authentication dialog and enter the name of your Windows Azure Active Directory to do this: This will automatically configure your ASP.NET application to use Windows Azure Active Directory and register the application with it.  Now when you run the app your users can easily and securely sign-in using their Active Directory credentials within it – regardless of where the application is hosted on the Internet. For more information about the new process for creating web projects, see Creating ASP.NET Web Projects in Visual Studio 2013. Responsive Project Templates with Bootstrap The new default project templates for ASP.NET Web Forms, MVC, Web API and SPA are built using Bootstrap. Bootstrap is an open source CSS framework that helps you build responsive websites which look great on different form factors such as mobile phones, tables and desktops. For example in a browser window the home page created by the MVC template looks like the following: When you resize the browser to a narrow window to see how it would like on a phone, you can notice how the contents gracefully wrap around and the horizontal top menu turns into an icon: When you click the menu-icon above it expands into a vertical menu – which enables a good navigation experience for small screen real-estate devices: We think Bootstrap will enable developers to build web applications that work even better on phones, tablets and other mobile devices – and enable you to easily build applications that can leverage the rich ecosystem of Bootstrap CSS templates already out there.  You can learn more about Bootstrap here. Visual Studio Web Tooling Improvements Visual Studio 2013 includes a new, much richer, HTML editor for Razor files and HTML files in web applications. The new HTML editor provides a single unified schema based on HTML5. It has automatic brace completion, jQuery UI and AngularJS attribute IntelliSense, attribute IntelliSense Grouping, and other great improvements. For example, typing “ng-“ on an HTML element will show the intellisense for AngularJS: This support for AngularJS, Knockout.js, Handlebars and other SPA technologies in this release of ASP.NET and VS 2013 makes it even easier to build rich client web applications: The screen shot below demonstrates how the HTML editor can also now inspect your page at design-time to determine all of the CSS classes that are available. In this case, the auto-completion list contains classes from Bootstrap’s CSS file. No more guessing at which Bootstrap element names you need to use: Visual Studio 2013 also comes with built-in support for both CoffeeScript and LESS editing support. The LESS editor comes with all the cool features from the CSS editor and has specific Intellisense for variables and mixins across all the LESS documents in the @import chain. Browser Link – SignalR channel between browser and Visual Studio The new Browser Link feature in VS 2013 lets you run your app within multiple browsers on your dev machine, connect them to Visual Studio, and simultaneously refresh all of them just by clicking a button in the toolbar. You can connect multiple browsers (including IE, FireFox, Chrome) to your development site, including mobile emulators, and click refresh to refresh all the browsers all at the same time.  This makes it much easier to easily develop/test against multiple browsers in parallel. Browser Link also exposes an API to enable developers to write Browser Link extensions.  By enabling developers to take advantage of the Browser Link API, it becomes possible to create very advanced scenarios that crosses boundaries between Visual Studio and any browser that’s connected to it. Web Essentials takes advantage of the API to create an integrated experience between Visual Studio and the browser’s developer tools, remote controlling mobile emulators and a lot more. You will see us take advantage of this support even more to enable really cool scenarios going forward. ASP.NET Scaffolding ASP.NET Scaffolding is a new code generation framework for ASP.NET Web applications. It makes it easy to add boilerplate code to your project that interacts with a data model. In previous versions of Visual Studio, scaffolding was limited to ASP.NET MVC projects. With Visual Studio 2013, you can now use scaffolding for any ASP.NET project, including Web Forms. When using scaffolding, we ensure that all required dependencies are automatically installed for you in the project. For example, if you start with an ASP.NET Web Forms project and then use scaffolding to add a Web API Controller, the required NuGet packages and references to enable Web API are added to your project automatically.  To do this, just choose the Add->New Scaffold Item context menu: Support for scaffolding async controllers uses the new async features from Entity Framework 6. ASP.NET Identity ASP.NET Identity is a new membership system for ASP.NET applications that we are introducing with this release. ASP.NET Identity makes it easy to integrate user-specific profile data with application data. ASP.NET Identity also allows you to choose the persistence model for user profiles in your application. You can store the data in a SQL Server database or another data store, including NoSQL data stores such as Windows Azure Storage Tables. ASP.NET Identity also supports Claims-based authentication, where the user’s identity is represented as a set of claims from a trusted issuer. Users can login by creating an account on the website using username and password, or they can login using social identity providers (such as Microsoft Account, Twitter, Facebook, Google) or using organizational accounts through Windows Azure Active Directory or Active Directory Federation Services (ADFS). To learn more about how to use ASP.NET Identity visit http://www.asp.net/identity.  ASP.NET Web API 2 ASP.NET Web API 2 has a bunch of great improvements including: Attribute routing ASP.NET Web API now supports attribute routing, thanks to a contribution by Tim McCall, the author of http://attributerouting.net. With attribute routing you can specify your Web API routes by annotating your actions and controllers like this: OAuth 2.0 support The Web API and Single Page Application project templates now support authorization using OAuth 2.0. OAuth 2.0 is a framework for authorizing client access to protected resources. It works for a variety of clients including browsers and mobile devices. OData Improvements ASP.NET Web API also now provides support for OData endpoints and enables support for both ATOM and JSON-light formats. With OData you get support for rich query semantics, paging, $metadata, CRUD operations, and custom actions over any data source. Below are some of the specific enhancements in ASP.NET Web API 2 OData. Support for $select, $expand, $batch, and $value Improved extensibility Type-less support Reuse an existing model OWIN Integration ASP.NET Web API now fully supports OWIN and can be run on any OWIN capable host. With OWIN integration, you can self-host Web API in your own process alongside other OWIN middleware, such as SignalR. For more information, see Use OWIN to Self-Host ASP.NET Web API. More Web API Improvements In addition to the features above there have been a host of other features in ASP.NET Web API, including CORS support Authentication Filters Filter Overrides Improved Unit Testability Portable ASP.NET Web API Client To learn more go to http://www.asp.net/web-api/ ASP.NET SignalR 2 ASP.NET SignalR is library for ASP.NET developers that dramatically simplifies the process of adding real-time web functionality to your applications. Real-time web functionality is the ability to have server-side code push content to connected clients instantly as it becomes available. SignalR 2.0 introduces a ton of great improvements. We’ve added support for Cross-Origin Resource Sharing (CORS) to SignalR 2.0. iOS and Android support for SignalR have also been added using the MonoTouch and MonoDroid components from the Xamarin library (for more information on how to use these additions, see the article Using Xamarin Components from the SignalR wiki). We’ve also added support for the Portable .NET Client in SignalR 2.0 and created a new self-hosting package. This change makes the setup process for SignalR much more consistent between web-hosted and self-hosted SignalR applications. To learn more go to http://www.asp.net/signalr. ASP.NET MVC 5 The ASP.NET MVC project templates integrate seamlessly with the new One ASP.NET experience and enable you to integrate all of the above ASP.NET Web API, SignalR and Identity improvements. You can also customize your MVC project and configure authentication using the One ASP.NET project creation wizard. The MVC templates have also been updated to use ASP.NET Identity and Bootstrap as well. An introductory tutorial to ASP.NET MVC 5 can be found at Getting Started with ASP.NET MVC 5. This release of ASP.NET MVC also supports several nice new MVC-specific features including: Authentication filters: These filters allow you to specify authentication logic per-action, per-controller or globally for all controllers. Attribute Routing: Attribute Routing allows you to define your routes on actions or controllers. To learn more go to http://www.asp.net/mvc Entity Framework 6 Improvements Visual Studio 2013 ships with Entity Framework 6, which bring a lot of great new features to the data access space: Async and Task<T> Support EF6’s new Async Query and Save support enables you to perform asynchronous data access and take advantage of the Task<T> support introduced in .NET 4.5 within data access scenarios.  This allows you to free up threads that might otherwise by blocked on data access requests, and enable them to be used to process other requests whilst you wait for the database engine to process operations. When the database server responds the thread will be re-queued within your ASP.NET application and execution will continue.  This enables you to easily write significantly more scalable server code. Here is an example ASP.NET WebAPI action that makes use of the new EF6 async query methods: Interception and Logging Interception and SQL logging allows you to view – or even change – every command that is sent to the database by Entity Framework. This includes a simple, human readable log – which is great for debugging – as well as some lower level building blocks that give you access to the command and results. Here is an example of wiring up the simple log to Debug in the constructor of an MVC controller: Custom Code-First Conventions The new Custom Code-First Conventions enable bulk configuration of a Code First model – reducing the amount of code you need to write and maintain. Conventions are great when your domain classes don’t match the Code First conventions. For example, the following convention configures all properties that are called ‘Key’ to be the primary key of the entity they belong to. This is different than the default Code First convention that expects Id or <type name>Id. Connection Resiliency The new Connection Resiliency feature in EF6 enables you to register an execution strategy to handle – and potentially retry – failed database operations. This is especially useful when deploying to cloud environments where dropped connections become more common as you traverse load balancers and distributed networks. EF6 includes a built-in execution strategy for SQL Azure that knows about retryable exception types and has some sensible – but overridable – defaults for the number of retries and time between retries when errors occur. Registering it is simple using the new Code-Based Configuration support: These are just some of the new features in EF6. You can visit the release notes section of the Entity Framework site for a complete list of new features. Microsoft OWIN Components Open Web Interface for .NET (OWIN) defines an open abstraction between .NET web servers and web applications, and the ASP.NET “Katana” project brings this abstraction to ASP.NET. OWIN decouples the web application from the server, making web applications host-agnostic. For example, you can host an OWIN-based web application in IIS or self-host it in a custom process. For more information about OWIN and Katana, see What's new in OWIN and Katana. Summary Today’s Visual Studio 2013, ASP.NET and Entity Framework release delivers some fantastic new features that streamline your web development lifecycle. These feature span from server framework to data access to tooling to client-side HTML development.  They also integrate some great open-source technology and contributions from our developer community. Download and start using them today! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Announcing Entity Framework Code-First (CTP5 release)

  - by ScottGu

  This week the data team released the CTP5 build of the new Entity Framework Code-First library.  EF Code-First enables a pretty sweet code-centric development workflow for working with data.  It enables you to: Develop without ever having to open a designer or define an XML mapping file Define model objects by simply writing “plain old classes” with no base classes required Use a “convention over configuration” approach that enables database persistence without explicitly configuring anything Optionally override the convention-based persistence and use a fluent code API to fully customize the persistence mapping I’m a big fan of the EF Code-First approach, and wrote several blog posts about it this summer: Code-First Development with Entity Framework 4 (July 16th) EF Code-First: Custom Database Schema Mapping (July 23rd) Using EF Code-First with an Existing Database (August 3rd) Today’s new CTP5 release delivers several nice improvements over the CTP4 build, and will be the last preview build of Code First before the final release of it.  We will ship the final EF Code First release in the first quarter of next year (Q1 of 2011).  It works with all .NET application types (including both ASP.NET Web Forms and ASP.NET MVC projects). Installing EF Code First You can install and use EF Code First CTP5 using one of two ways: Approach 1) By downloading and running a setup program.  Once installed you can reference the EntityFramework.dll assembly it provides within your projects.      or: Approach 2) By using the NuGet Package Manager within Visual Studio to download and install EF Code First within a project.  To do this, simply bring up the NuGet Package Manager Console within Visual Studio (View->Other Windows->Package Manager Console) and type “Install-Package EFCodeFirst”: Typing “Install-Package EFCodeFirst” within the Package Manager Console will cause NuGet to download the EF Code First package, and add it to your current project: Doing this will automatically add a reference to the EntityFramework.dll assembly to your project:   NuGet enables you to have EF Code First setup and ready to use within seconds.  When the final release of EF Code First ships you’ll also be able to just type “Update-Package EFCodeFirst” to update your existing projects to use the final release. EF Code First Assembly and Namespace The CTP5 release of EF Code First has an updated assembly name, and new .NET namespace: Assembly Name: EntityFramework.dll Namespace: System.Data.Entity These names match what we plan to use for the final release of the library. Nice New CTP5 Improvements The new CTP5 release of EF Code First contains a bunch of nice improvements and refinements. Some of the highlights include: Better support for Existing Databases Built-in Model-Level Validation and DataAnnotation Support Fluent API Improvements Pluggable Conventions Support New Change Tracking API Improved Concurrency Conflict Resolution Raw SQL Query/Command Support The rest of this blog post contains some more details about a few of the above changes. Better Support for Existing Databases EF Code First makes it really easy to create model layers that work against existing databases.  CTP5 includes some refinements that further streamline the developer workflow for this scenario. Below are the steps to use EF Code First to create a model layer for the Northwind sample database: Step 1: Create Model Classes and a DbContext class Below is all of the code necessary to implement a simple model layer using EF Code First that goes against the Northwind database: EF Code First enables you to use “POCO” – Plain Old CLR Objects – to represent entities within a database.  This means that you do not need to derive model classes from a base class, nor implement any interfaces or data persistence attributes on them.  This enables the model classes to be kept clean, easily testable, and “persistence ignorant”.  The Product and Category classes above are examples of POCO model classes. EF Code First enables you to easily connect your POCO model classes to a database by creating a “DbContext” class that exposes public properties that map to the tables within a database.  The Northwind class above illustrates how this can be done.  It is mapping our Product and Category classes to the “Products” and “Categories” tables within the database.  The properties within the Product and Category classes in turn map to the columns within the Products and Categories tables – and each instance of a Product/Category object maps to a row within the tables. The above code is all of the code required to create our model and data access layer!  Previous CTPs of EF Code First required an additional step to work against existing databases (a call to Database.Initializer<Northwind>(null) to tell EF Code First to not create the database) – this step is no longer required with the CTP5 release.  Step 2: Configure the Database Connection String We’ve written all of the code we need to write to define our model layer.  Our last step before we use it will be to setup a connection-string that connects it with our database.  To do this we’ll add a “Northwind” connection-string to our web.config file (or App.Config for client apps) like so:   <connectionStrings>          <add name="Northwind"          connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\northwind.mdf;User Instance=true"          providerName="System.Data.SqlClient" />   </connectionStrings> EF “code first” uses a convention where DbContext classes by default look for a connection-string that has the same name as the context class.  Because our DbContext class is called “Northwind” it by default looks for a “Northwind” connection-string to use.  Above our Northwind connection-string is configured to use a local SQL Express database (stored within the \App_Data directory of our project).  You can alternatively point it at a remote SQL Server. Step 3: Using our Northwind Model Layer We can now easily query and update our database using the strongly-typed model layer we just built with EF Code First. The code example below demonstrates how to use LINQ to query for products within a specific product category.  This query returns back a sequence of strongly-typed Product objects that match the search criteria: The code example below demonstrates how we can retrieve a specific Product object, update two of its properties, and then save the changes back to the database: EF Code First handles all of the change-tracking and data persistence work for us, and allows us to focus on our application and business logic as opposed to having to worry about data access plumbing. Built-in Model Validation EF Code First allows you to use any validation approach you want when implementing business rules with your model layer.  This enables a great deal of flexibility and power. Starting with this week’s CTP5 release, EF Code First also now includes built-in support for both the DataAnnotation and IValidatorObject validation support built-into .NET 4.  This enables you to easily implement validation rules on your models, and have these rules automatically be enforced by EF Code First whenever you save your model layer.  It provides a very convenient “out of the box” way to enable validation within your applications. Applying DataAnnotations to our Northwind Model The code example below demonstrates how we could add some declarative validation rules to two of the properties of our “Product” model: We are using the [Required] and [Range] attributes above.  These validation attributes live within the System.ComponentModel.DataAnnotations namespace that is built-into .NET 4, and can be used independently of EF.  The error messages specified on them can either be explicitly defined (like above) – or retrieved from resource files (which makes localizing applications easy). Validation Enforcement on SaveChanges() EF Code-First (starting with CTP5) now automatically applies and enforces DataAnnotation rules when a model object is updated or saved.  You do not need to write any code to enforce this – this support is now enabled by default.  This new support means that the below code – which violates our above rules – will automatically throw an exception when we call the “SaveChanges()” method on our Northwind DbContext: The DbEntityValidationException that is raised when the SaveChanges() method is invoked contains a “EntityValidationErrors” property that you can use to retrieve the list of all validation errors that occurred when the model was trying to save.  This enables you to easily guide the user on how to fix them.  Note that EF Code-First will abort the entire transaction of changes if a validation rule is violated – ensuring that our database is always kept in a valid, consistent state. EF Code First’s validation enforcement works both for the built-in .NET DataAnnotation attributes (like Required, Range, RegularExpression, StringLength, etc), as well as for any custom validation rule you create by sub-classing the System.ComponentModel.DataAnnotations.ValidationAttribute base class. UI Validation Support A lot of our UI frameworks in .NET also provide support for DataAnnotation-based validation rules. For example, ASP.NET MVC, ASP.NET Dynamic Data, and Silverlight (via WCF RIA Services) all provide support for displaying client-side validation UI that honor the DataAnnotation rules applied to model objects. The screen-shot below demonstrates how using the default “Add-View” scaffold template within an ASP.NET MVC 3 application will cause appropriate validation error messages to be displayed if appropriate values are not provided: ASP.NET MVC 3 supports both client-side and server-side enforcement of these validation rules.  The error messages displayed are automatically picked up from the declarative validation attributes – eliminating the need for you to write any custom code to display them. Keeping things DRY The “DRY Principle” stands for “Do Not Repeat Yourself”, and is a best practice that recommends that you avoid duplicating logic/configuration/code in multiple places across your application, and instead specify it only once and have it apply everywhere. EF Code First CTP5 now enables you to apply declarative DataAnnotation validations on your model classes (and specify them only once) and then have the validation logic be enforced (and corresponding error messages displayed) across all applications scenarios – including within controllers, views, client-side scripts, and for any custom code that updates and manipulates model classes. This makes it much easier to build good applications with clean code, and to build applications that can rapidly iterate and evolve. Other EF Code First Improvements New to CTP5 EF Code First CTP5 includes a bunch of other improvements as well.  Below are a few short descriptions of some of them: Fluent API Improvements EF Code First allows you to override an “OnModelCreating()” method on the DbContext class to further refine/override the schema mapping rules used to map model classes to underlying database schema.  CTP5 includes some refinements to the ModelBuilder class that is passed to this method which can make defining mapping rules cleaner and more concise.  The ADO.NET Team blogged some samples of how to do this here. Pluggable Conventions Support EF Code First CTP5 provides new support that allows you to override the “default conventions” that EF Code First honors, and optionally replace them with your own set of conventions. New Change Tracking API EF Code First CTP5 exposes a new set of change tracking information that enables you to access Original, Current & Stored values, and State (e.g. Added, Unchanged, Modified, Deleted).  This support is useful in a variety of scenarios. Improved Concurrency Conflict Resolution EF Code First CTP5 provides better exception messages that allow access to the affected object instance and the ability to resolve conflicts using current, original and database values.  Raw SQL Query/Command Support EF Code First CTP5 now allows raw SQL queries and commands (including SPROCs) to be executed via the SqlQuery and SqlCommand methods exposed off of the DbContext.Database property.  The results of these method calls can be materialized into object instances that can be optionally change-tracked by the DbContext.  This is useful for a variety of advanced scenarios. Full Data Annotations Support EF Code First CTP5 now supports all standard DataAnnotations within .NET, and can use them both to perform validation as well as to automatically create the appropriate database schema when EF Code First is used in a database creation scenario.  Summary EF Code First provides an elegant and powerful way to work with data.  I really like it because it is extremely clean and supports best practices, while also enabling solutions to be implemented very, very rapidly.  The code-only approach of the library means that model layers end up being flexible and easy to customize. This week’s CTP5 release further refines EF Code First and helps ensure that it will be really sweet when it ships early next year.  I recommend using NuGet to install and give it a try today.  I think you’ll be pleasantly surprised by how awesome it is. Hope this helps, Scott

  Read the article

• 10 Essential Tools for building ASP.NET Websites

  - by Stephen Walther

  I recently put together a simple public website created with ASP.NET for my company at Superexpert.com. I was surprised by the number of free tools that I ended up using to put together the website. Therefore, I thought it would be interesting to create a list of essential tools for building ASP.NET websites. These tools work equally well with both ASP.NET Web Forms and ASP.NET MVC. Performance Tools After reading Steve Souders two (very excellent) books on front-end website performance High Performance Web Sites and Even Faster Web Sites, I have been super sensitive to front-end website performance. According to Souders’ Performance Golden Rule: “Optimize front-end performance first, that's where 80% or more of the end-user response time is spent” You can use the tools below to reduce the size of the images, JavaScript files, and CSS files used by an ASP.NET application. 1. Sprite and Image Optimization Framework CSS sprites were first described in an article written for A List Apart entitled CSS sprites: Image Slicing’s Kiss of Death. When you use sprites, you combine multiple images used by a website into a single image. Next, you use CSS trickery to display particular sub-images from the combined image in a webpage. The primary advantage of sprites is that they reduce the number of requests required to display a webpage. Requesting a single large image is faster than requesting multiple small images. In general, the more resources – images, JavaScript files, CSS files – that must be moved across the wire, the slower your website. However, most people avoid using sprites because they require a lot of work. You need to combine all of the images and write just the right CSS rules to display the sub-images. The Microsoft Sprite and Image Optimization Framework enables you to avoid all of this work. The framework combines the images for you automatically. Furthermore, the framework includes an ASP.NET Web Forms control and an ASP.NET MVC helper that makes it easy to display the sub-images. You can download the Sprite and Image Optimization Framework from CodePlex at http://aspnet.codeplex.com/releases/view/50869. The Sprite and Image Optimization Framework was written by Morgan McClean who worked in the office next to mine at Microsoft. Morgan was a scary smart Intern from Canada and we discussed the Framework while he was building it (I was really excited to learn that he was working on it). Morgan added some great advanced features to this framework. For example, the Sprite and Image Optimization Framework supports something called image inlining. When you use image inlining, the actual image is stored in the CSS file. Here’s an example of what image inlining looks like: .Home_StephenWalther_small-jpg { width:75px; height:100px; background: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAEsAAABkCAIAAABB1lpeAAAAB GdBTUEAALGOfPtRkwAAACBjSFJNAACHDwAAjA8AAP1SAACBQAAAfXkAAOmLAAA85QAAGcxzPIV3AAAKL s+zNfREAAAAASUVORK5CYII=) no-repeat 0% 0%; } The actual image (in this case a picture of me that is displayed on the home page of the Superexpert.com website) is stored in the CSS file. If you visit the Superexpert.com website then very few separate images are downloaded. For example, all of the images with a red border in the screenshot below take advantage of CSS sprites: Unfortunately, there are some significant Gotchas that you need to be aware of when using the Sprite and Image Optimization Framework. There are workarounds for these Gotchas. I plan to write about these Gotchas and workarounds in a future blog entry. 2. Microsoft Ajax Minifier Whenever possible you should combine, minify, compress, and cache with a far future header all of your JavaScript and CSS files. The Microsoft Ajax Minifier makes it easy to minify JavaScript and CSS files. Don’t confuse minification and compression. You need to do both. According to Souders, you can reduce the size of a JavaScript file by an additional 20% (on average) by minifying a JavaScript file after you compress the file. When you minify a JavaScript or CSS file, you use various tricks to reduce the size of the file before you compress the file. For example, you can minify a JavaScript file by replacing long JavaScript variables names with short variables names and removing unnecessary white space and comments. You can minify a CSS file by doing such things as replacing long color names such as #ffffff with shorter equivalents such as #fff. The Microsoft Ajax Minifier was created by Microsoft employee Ron Logan. Internally, this tool was being used by several large Microsoft websites. We also used the tool heavily on the ASP.NET team. I convinced Ron to publish the tool on CodePlex so that everyone in the world could take advantage of it. You can download the tool from the ASP.NET Ajax website and read documentation for the tool here. I created the installer for the Microsoft Ajax Minifier. When creating the installer, I also created a Visual Studio build task to make it easy to minify all of your JavaScript and CSS files whenever you do a build within Visual Studio automatically. Read the Ajax Minifier Quick Start to learn how to configure the build task. 3. ySlow The ySlow tool is a free add-on for Firefox created by Yahoo that enables you to test the front-end of your website. For example, here are the current test results for the Superexpert.com website: The Superexpert.com website has an overall score of B (not perfect but not bad). The ySlow tool is not perfect. For example, the Superexpert.com website received a failing grade of F for not using a Content Delivery Network even though the website using the Microsoft Ajax Content Delivery Network for JavaScript files such as jQuery. Uptime After publishing a website live to the world, you want to ensure that the website does not encounter any issues and that it stays live. I use the following tools to monitor the Superexpert.com website now that it is live. 4. ELMAH ELMAH stands for Error Logging Modules and Handlers for ASP.NET. ELMAH enables you to record any errors that happen at your website so you can review them in the future. You can download ELMAH for free from the ELMAH project website. ELMAH works great with both ASP.NET Web Forms and ASP.NET MVC. You can configure ELMAH to store errors in a number of different stores including XML files, the Event Log, an Access database, a SQL database, an Oracle database, or in computer RAM. You also can configure ELMAH to email error messages to you when they happen. By default, you can access ELMAH by requesting the elmah.axd page from a website with ELMAH installed. Here’s what the elmah page looks like from the Superexpert.com website (this page is password-protected because secret information can be revealed in an error message): If you click on a particular error message, you can view the original Yellow Screen ASP.NET error message (even when the error message was never displayed to the actual user). I installed ELMAH by taking advantage of the new package manager for ASP.NET named NuGet (originally named NuPack). You can read the details about NuGet in the following blog entry by Scott Guthrie. You can download NuGet from CodePlex. 5. Pingdom I use Pingdom to verify that the Superexpert.com website is always up. You can sign up for Pingdom by visiting Pingdom.com. You can use Pingdom to monitor a single website for free. At the Pingdom website, you configure the frequency that your website gets pinged. I verify that the Superexpert.com website is up every 5 minutes. I have the Pingdom service verify that it can retrieve the string “Contact Us” from the website homepage. If your website goes down, you can configure Pingdom so that it sends an email, Twitter, SMS, or iPhone alert. I use the Pingdom iPhone app which looks like this: 6. Host Tracker If your website does go down then you need some way of determining whether it is a problem with your local network or if your website is down for everyone. I use a website named Host-Tracker.com to check how badly a website is down. Here’s what the Host-Tracker website displays for the Superexpert.com website when the website can be successfully pinged from everywhere in the world: Notice that Host-Tracker pinged the Superexpert.com website from 68 locations including Roubaix, France and Scranton, PA. Debugging I mean debugging in the broadest possible sense. I use the following tools when building a website to verify that I have not made a mistake. 7. HTML Spell Checker Why doesn’t Visual Studio have a built-in spell checker? Don’t know – I’ve always found this mysterious. Fortunately, however, a former member of the ASP.NET team wrote a free spell checker that you can use with your ASP.NET pages. I find a spell checker indispensible. It is easy to delude yourself that you are capable of perfect spelling. I’m always super embarrassed when I actually run the spell checking tool and discover all of my spelling mistakes. The fastest way to add the HTML Spell Checker extension to Visual Studio is to select the menu option Tools, Extension Manager within Visual Studio. Click on Online Gallery and search for HTML Spell Checker: 8. IIS SEO Toolkit If people cannot find your website through Google then you should not even bother to create it. Microsoft has a great extension for IIS named the IIS Search Engine Optimization Toolkit that you can use to identify issue with your website that would hurt its page rank. You also can use this tool to quickly create a sitemap for your website that you can submit to Google or Bing. You can even generate the sitemap for an ASP.NET MVC website. Here’s what the report overview for the Superexpert.com website looks like: Notice that the Sueprexpert.com website had plenty of violations. For example, there are 65 cases in which a page has a broken hyperlink. You can drill into these violations to identity the exact page and location where these violations occur. 9. LinqPad If your ASP.NET website accesses a database then you should be using LINQ to Entities with the Entity Framework. Using LINQ involves some magic. LINQ queries written in C# get converted into SQL queries for you. If you are not careful about how you write your LINQ queries, you could unintentionally build a really badly performing website. LinqPad is a free tool that enables you to experiment with your LINQ queries. It even works with Microsoft SQL CE 4 and Azure. You can use LinqPad to execute a LINQ to Entities query and see the results. You also can use it to see the resulting SQL that gets executed against the database: 10. .NET Reflector I use .NET Reflector daily. The .NET Reflector tool enables you to take any assembly and disassemble the assembly into C# or VB.NET code. You can use .NET Reflector to see the “Source Code” of an assembly even when you do not have the actual source code. You can download a free version of .NET Reflector from the Redgate website. I use .NET Reflector primarily to help me understand what code is doing internally. For example, I used .NET Reflector with the Sprite and Image Optimization Framework to better understand how the MVC Image helper works. Here’s part of the disassembled code from the Image helper class: Summary In this blog entry, I’ve discussed several of the tools that I used to create the Superexpert.com website. These are tools that I use to improve the performance, improve the SEO, verify the uptime, or debug the Superexpert.com website. All of the tools discussed in this blog entry are free. Furthermore, all of these tools work with both ASP.NET Web Forms and ASP.NET MVC. Let me know if there are any tools that you use daily when building ASP.NET websites.

  Read the article

• Building The Right SharePoint Team For Your Organization

  - by Mark Rackley

  I see the question posted fairly often asking what kind SharePoint team an organization should have. How many people do I need? What roles do I need to fill? What is best for my organization? Well, just like every other answer in SharePoint, the correct answer is “it depends”. Do you ever get sick of hearing that??? I know I do… So, let me give you my thoughts and opinions based upon my experience and what I’ve seen and let you come to your own conclusions. What are the possible SharePoint roles? I guess the first thing you need to understand are the different roles that exist in SharePoint (and their are LOTS). Remember, SharePoint is a massive beast and you will NOT find one person who can do it all. If you are hoping to find that person you will be sorely disappointed. For the most part this is true in SharePoint 2007 and 2010. However, generally things are improved in 2010 and easier for junior individuals to grasp. SharePoint Administrator The absolutely positively only role that you should not be without no matter the size of your organization or SharePoint deployment is a SharePoint administrator. These guys are essential to keeping things running and figuring out what’s wrong when things aren’t running well. These unsung heroes do more before 10 am than I do all day. The bad thing is, when these guys are awesome, you don’t even know they exist because everything is running so smoothly. You should definitely invest some time and money here to make sure you have some competent if not rockstar help. You need an admin who truly loves SharePoint and will go that extra mile when necessary. Let me give you a real world example of what I’m talking about: We have a rockstar admin… and I’m sure she’s sick of my throwing her name around so she’ll just have to live with remaining anonymous in this post… sorry Lori… Anyway! A couple of weeks ago our Server teams came to us and said Hi Lori, I’m finalizing the MOSS servers and doing updates that require a restart; can I restart them? Seems like a harmless request from your server team does it not? Sure, go ahead and apply the patches and reboot during our scheduled maintenance window. No problem? right? Sounded fair to me… but no…. not to our fearless SharePoint admin… I need a complete list of patches that will be applied. There is an update that is out there that will break SharePoint… KB973917 is the patch that has been shown to cause issues. What? You mean Microsoft released a patch that would actually adversely affect SharePoint? If we did NOT have a rockstar admin, our server team would have applied these patches and then when some problem occurred in SharePoint we’d have to go through the fun task of tracking down exactly what caused the issue and resolve it. How much time would that have taken? If you have a junior SharePoint admin or an admin who’s not out there staying on top of what’s going on you could have spent days tracking down something so simple as applying a patch you should not have applied. I will even go as far to say the only SharePoint rockstar you NEED in your organization is a SharePoint admin. You can always outsource really complicated development projects or bring in a rockstar contractor every now and then to make sure you aren’t way off track in other areas. For your day-to-day sanity and to keep SharePoint running smoothly, you need an awesome Admin. Some rockstars in this category are: Ben Curry, Mike Watson, Joel Oleson, Todd Klindt, Shane Young, John Ferringer, Sean McDonough, and of course Lori Gowin. SharePoint Developer Another essential role for your SharePoint deployment is a SharePoint developer. Things do start to get a little hazy here and there are many flavors of “developers”. Are you writing custom code? using SharePoint Designer? What about SharePoint Branding?  Are all of these considered developers? I would say yes. Are they interchangeable? I’d say no. Development in SharePoint is such a large beast in itself. I would say that it’s not so large that you can’t know it all well, but it is so large that there are many people who specialize in one particular category. If you are lucky enough to have someone on staff who knows it all well, you better make sure they are well taken care of because those guys are ready-made to move over to a consulting role and charge you 3 times what you are probably paying them. :) Some of the all-around rockstars are Eric Shupps, Andrew Connell (go Razorbacks), Rob Foster, Paul Schaeflein, and Todd Bleeker SharePoint Power User/No-Code Solutions Developer These SharePoint Swiss Army Knives are essential for quick wins in your organization. These people can twist the out-of-the-box functionality to make it do things you would not even imagine. Give these guys SharePoint Designer, jQuery, InfoPath, and a little time and they will create views, dashboards, and KPI’s that will blow your mind away and give your execs the “wow” they are looking for. Not only can they deliver that wow factor, but they can mashup, merge, and really help make your SharePoint application usable and deliver an overall better user experience. Before you hand off a project to your SharePoint Custom Code developer, let one of these rockstars look at it and show you what they can do (in probably less time). I would say the second most important role you can fill in your organization is one of these guys. Rockstars in this category are Christina Wheeler, Laura Rogers, Jennifer Mason, and Mark Miller SharePoint Developer – Custom Code If you want to really integrate SharePoint into your legacy systems, or really twist it and make it bend to your will, you are going to have to open up Visual Studio and write some custom code.  Remember, SharePoint is essentially just a big, huge, ginormous .NET application, so you CAN write code to make it do ANYTHING, but do you really want to spend the time and effort to do so? At some point with every other form of SharePoint development you are going to run into SOME limitation (SPD Workflows is the big one that comes to mind). If you truly want to knock down all the walls then custom development is the way to go. PLEASE keep in mind when you are looking for a custom code developer that a .NET developer does NOT equal a SharePoint developer. Just SOME of the things these guys write are: Custom Workflows Custom Web Parts Web Service functionality Import data from legacy systems Export data to legacy systems Custom Actions Event Receivers Service Applications (2010) These guys are also the ones generally responsible for packaging everything up into solution packages (you are doing that, right?). Rockstars in this category are Phil Wicklund, Christina Wheeler, Geoff Varosky, and Brian Jackett. SharePoint Branding “But it LOOKS like SharePoint!” Somebody call the WAAAAAAAAAAAAHMbulance…   Themes, Master Pages, Page Layouts, Zones, and over 2000 styles in CSS.. these guys not only have to be comfortable with all of SharePoint’s quirks and pain points when branding, but they have to know it TWICE for publishing and non-publishing sites.  Not only that, but these guys really need to have an eye for graphic design and be able to translate the ramblings of business into something visually stunning. They also have to be comfortable with XSLT, XML, and be able to hand off what they do to your custom developers for them to package as solutions (which you are doing, right?). These rockstars include Heater Waterman, Cathy Dew, and Marcy Kellar SharePoint Architect SharePoint Architects are generally SharePoint Admins or Developers who have moved into more of a BA role? Is that fair to say? These guys really have a grasp and understanding for what SharePoint IS and what it can do. These guys help you structure your farms to meet your needs and help you design your applications the correct way. It’s always a good idea to bring in a rockstar SharePoint Architect to do a sanity check and make sure you aren’t doing anything stupid.  Most organizations probably do not have a rockstar architect on staff. These guys are generally brought in at the deployment of a farm, upgrade of a farm, or for large development projects. I personally also find architects very useful for sitting down with the business to translate their needs into what SharePoint can do. A good architect will be able to pick out what can be done out-of-the-box and what has to be custom built and hand those requirements to the development Staff. Architects can generally fill in as an admin or a developer when needed. Some rockstar architects are Rick Taylor, Dan Usher, Bill English, Spence Harbar, Neil Hodgkins, Eric Harlan, and Bjørn Furuknap. Other Roles / Specialties On top of all these other roles you also get these people who specialize in things like Reporting, BDC (BCS in 2010), Search, Performance, Security, Project Management, etc... etc... etc... Again, most organizations will not have one of these gurus on staff, they’ll just pay out the nose for them when they need them. :) SharePoint End User Everyone else in your organization that touches SharePoint falls into this category. What they actually DO in SharePoint is determined by your governance and what permissions you give these guys. Hopefully you have these guys on a fairly short leash and are NOT giving them access to tools like SharePoint Designer. Sadly end users are the ones who truly make your deployment a success by using it, but are also your biggest enemy in breaking it.  :)  We love you guys… really!!! Okay, all that’s fine and dandy, but what should MY SharePoint team look like? It depends! Okay… Are you just doing out of the box team sites with no custom development? Then you are probably fine with a great Admin team and a great No-Code Solution Development team. How many people do you need? Depends on how busy you can keep them. Sorry, can’t answer the question about numbers without knowing your specific needs. I can just tell you who you MIGHT need and what they will do for you. I’ll leave you with what my ideal SharePoint Team would look like for a particular scenario: Farm / Organization Structure Dev, QA, and 2 Production Farms. 5000 – 10000 Users Custom Development and Integration with legacy systems Team Sites, My Sites, Intranet, Document libraries and overall company collaboration Team Rockstar SharePoint Administrator 2-3 junior SharePoint Administrators SharePoint Architect / Lead Developer 2 Power User / No-Code Solution Developers 2-3 Custom Code developers Branding expert With a team of that size and skill set, they should be able to keep a substantial SharePoint deployment running smoothly and meet your business needs. This does NOT mean that you would not need to bring in contract help from time to time when you need an uber specialist in one area. Also, this team assumes there will be ongoing development for the life of your SharePoint farm. If you are just going to be doing sporadic custom development, it might make sense to partner with an awesome firm that specializes in that sort of work (I can give you the name of a couple if you are interested).  Again though, the size of your team depends on the number of requests you are receiving and how much active deployment you are doing. So, don’t bring in a team that looks like this and then yell at me because they are sitting around with nothing to do or are so overwhelmed that nothing is getting done. I do URGE you to take the proper time to asses your needs and determine what team is BEST for your organization. Also, PLEASE PLEASE PLEASE do not skimp on the talent. When it comes to SharePoint you really do get what you pay for when it comes to employees, contractors, and software.  SharePoint can become absolutely critical to your business and because you skimped on hiring a developer he created a web part that brings down the farm because he doesn’t know what he’s doing, or you hire an admin who thinks it’s fine to stick everything in the same Content Database and then can’t figure out why people are complaining. SharePoint can be an enormous blessing to an organization or it’s biggest curse. Spend the time and money to do it right, or be prepared to spending even more time and money later to fix it.

  Read the article

• C++ reading and writing and writing files

  - by user320950

  Write a program that processes a list of items purchased with a receipt List in itemlist.txt just items different numbers Prices in pricelist.txt have items and prices in them, different # Make file output file that has receipt Print message saying program ran- have not done If item not in pricelist, report error, count errors display at end Don't know how many items or prices Close file and clear because of running many these files many times This program wont write to the files like so the above is what i have to do #include<iostream>`enter code here` #include<fstream> #include<cstdlib> #include<iomanip> using namespace std; int main() { ifstream in_stream; // reads itemlist.txt ofstream out_stream1; // writes in items.txt ifstream in_stream2; // reads pricelist.txt ofstream out_stream3;// writes in plist.txt ifstream in_stream4;// read recipt.txt ofstream out_stream5;// write display.txt double price=' ',curr_total=0.0; int wrong=0; int itemnum=' '; char next; in_stream.open("ITEMLIST.txt", ios::in); // list of avaliable items out_stream1.open("listWititems.txt", ios::out); // list of avaliable items in_stream2.open("PRICELIST.txt", ios::in); out_stream3.open("listWitdollars.txt", ios::out); in_stream4.open("display.txt", ios::in); out_stream5.open("showitems.txt", ios::out); in_stream.setf(ios::fixed); while(!in_stream.eof()) { in_stream >> itemnum; cin.clear(); cin >> next; } out_stream1.setf(ios::fixed); while (!out_stream1.eof()) { out_stream1 << itemnum; cin.clear(); cin >> next; } in_stream2.setf(ios::fixed); in_stream2.setf(ios::showpoint); in_stream2.precision(2); while (!in_stream2.eof()) // reads file to end of file { while((price== (price*1.00)) && (itemnum == (itemnum*1))) { in_stream2 >> itemnum >> price; itemnum++; price++; curr_total= price++; in_stream2 >> curr_total; cin.clear(); // allows more reading cin >> next; return itemnum, price; } } out_stream3.setf(ios::fixed); out_stream3.setf(ios::showpoint); out_stream3.precision(2); while (!out_stream3.eof()) // reads file to end of file { while((price== (price*1.00)) && (itemnum == (itemnum*1))) { out_stream3 << itemnum << price; itemnum++; price++; curr_total= price++; out_stream3 << curr_total; cin.clear(); // allows more reading cin >> next; return itemnum, price; } } in_stream4.setf(ios::fixed); in_stream4.setf(ios::showpoint); in_stream4.precision(2); while (!in_stream4.eof()) { in_stream4 >> itemnum >> price >> curr_total; cin.clear(); cin >> next; } out_stream5.setf(ios::fixed); out_stream5.setf(ios::showpoint); out_stream5.precision(2); out_stream5 <<setw(5)<< " itemnum " <<setw(5)<<" price "<<setw(5)<<" curr_total " <<endl; // sends items and prices to receipt.txt out_stream5 << setw(5) << itemnum << setw(5) <<price << setw(5)<< curr_total; // sends items and prices to receipt.txt out_stream5 << " You have a total of " << wrong++ << " errors " << endl; in_stream.close(); // closing files. out_stream1.close(); in_stream2.close(); out_stream3.close(); in_stream4.close(); out_stream5.close(); system("pause"); }

  Read the article

• The Inkremental Architect&acute;s Napkin - #4 - Make increments tangible

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/12/the-inkremental-architectacutes-napkin---4---make-increments-tangible.aspxThe driver of software development are increments, small increments, tiny increments. With an increment being a slice of the overall requirement scope thin enough to implement and get feedback from a product owner within 2 days max. Such an increment might concern Functionality or Quality.[1] To make such high frequency delivery of increments possible, the transition from talking to coding needs to be as easy as possible. A user story or some other documentation of what´s supposed to get implemented until tomorrow evening at latest is one side of the medal. The other is where to put the logic in all of the code base. To implement an increment, only logic statements are needed. Functionality like Quality are just about expressions and control flow statements. Think of Assembler code without the CALL/RET instructions. That´s all is needed. Forget about functions, forget about classes. To make a user happy none of that is really needed. It´s just about the right expressions and conditional executions paths plus some memory allocation. Automatic function inlining of compilers which makes it clear how unimportant functions are for delivering value to users at runtime. But why then are there functions? Because they were invented for optimization purposes. We need them for better Evolvability and Production Efficiency. Nothing more, nothing less. No software has become faster, more secure, more scalable, more functional because we gathered logic under the roof of a function or two or a thousand. Functions make logic easier to understand. Functions make us faster in producing logic. Functions make it easier to keep logic consistent. Functions help to conserve memory. That said, functions are important. They are even the pivotal element of software development. We can´t code without them - whether you write a function yourself or not. Because there´s always at least one function in play: the Entry Point of a program. In Ruby the simplest program looks like this:puts "Hello, world!" In C# more is necessary:class Program { public static void Main () { System.Console.Write("Hello, world!"); } } C# makes the Entry Point function explicit, not so Ruby. But still it´s there. So you can think of logic always running in some function. Which brings me back to increments: In order to make the transition from talking to code as easy as possible, it has to be crystal clear into which function you should put the logic. Product owners might be content once there is a sticky note a user story on the Scrum or Kanban board. But developers need an idea of what that sticky note means in term of functions. Because with a function in hand, with a signature to run tests against, they have something to focus on. All´s well once there is a function behind whose signature logic can be piled up. Then testing frameworks can be used to check if the logic is correct. Then practices like TDD can help to drive the implementation. That´s why most code katas define exactly how the API of a solution should look like. It´s a function, maybe two or three, not more. A requirement like “Write a function f which takes this as parameters and produces such and such output by doing x” makes a developer comfortable. Yes, there are all kinds of details to think about, like which algorithm or technology to use, or what kind of state and side effects to consider. Even a single function not only must deliver on Functionality, but also on Quality and Evolvability. Nevertheless, once it´s clear which function to put logic in, you have a tangible starting point. So, yes, what I´m suggesting is to find a single function to put all the logic in that´s necessary to deliver on a the requirements of an increment. Or to put it the other way around: Slice requirements in a way that each increment´s logic can be located under the roof of a single function. Entry points Of course, the logic of a software will always be spread across many, many functions. But there´s always an Entry Point. That´s the most important function for each increment, because that´s the root to put integration or even acceptance tests on. A batch program like the above hello-world application only has a single Entry Point. All logic is reached from there, regardless how deep it´s nested in classes. But a program with a user interface like this has at least two Entry Points: One is the main function called upon startup. The other is the button click event handler for “Show my score”. But maybe there are even more, like another Entry Point being a handler for the event fired when one of the choices gets selected; because then some logic could check if the button should be enabled because all questions got answered. Or another Entry Point for the logic to be executed when the program is close; because then the choices made should be persisted. You see, an Entry Point to me is a function which gets triggered by the user of a software. With batch programs that´s the main function. With GUI programs on the desktop that´s event handlers. With web programs that´s handlers for URL routes. And my basic suggestion to help you with slicing requirements for Spinning is: Slice them in a way so that each increment is related to only one Entry Point function.[2] Entry Points are the “outer functions” of a program. That´s where the environment triggers behavior. That´s where hardware meets software. Entry points always get called because something happened to hardware state, e.g. a key was pressed, a mouse button clicked, the system timer ticked, data arrived over a wire.[3] Viewed from the outside, software is just a collection of Entry Point functions made accessible via buttons to press, menu items to click, gestures, URLs to open, keys to enter. Collections of batch processors I´d thus say, we haven´t moved forward since the early days of software development. We´re still writing batch programs. Forget about “event-driven programming” with its fancy GUI applications. Software is just a collection of batch processors. Earlier it was just one per program, today it´s hundreds we bundle up into applications. Each batch processor is represented by an Entry Point as its root that works on a number of resources from which it reads data to process and to which it writes results. These resources can be the keyboard or main memory or a hard disk or a communication line or a display. Together many batch processors - large and small - form applications the user perceives as a single whole: Software development that way becomes quite simple: just implement one batch processor after another. Well, at least in principle ;-) Features Each batch processor entered through an Entry Point delivers value to the user. It´s an increment. Sometimes its logic is trivial, sometimes it´s very complex. Regardless, each Entry Point represents an increment. An Entry Point implemented thus is a step forward in terms of Agility. At the same time it´s a tangible unit for developers. Therefore, identifying the more or less numerous batch processors in a software system is a rewarding task for product owners and developers alike. That´s where user stories meet code. In this example the user story translates to the Entry Point triggered by clicking the login button on a dialog like this: The batch then retrieves what has been entered via keyboard, loads data from a user store, and finally outputs some kind of response on the screen, e.g. by displaying an error message or showing the next dialog. This is all very simple, but you see, there is not just one thing happening, but several. Get input (email address, password) Load user for email address If user not found report error Check password Hash password Compare hash to hash stored in user Show next dialog Viewed from 10,000 feet it´s all done by the Entry Point function. And of course that´s technically possible. It´s just a bunch of logic and calling a couple of API functions. However, I suggest to take these steps as distinct aspects of the overall requirement described by the user story. Such aspects of requirements I call Features. Features too are increments. Each provides some (small) value of its own to the user. Each can be checked individually by a product owner. Instead of implementing all the logic behind the Login() entry point at once you can move forward increment by increment, e.g. First implement the dialog, let the user enter any credentials, and log him/her in without any checks. Features 1 and 4. Then hard code a single user and check the email address. Features 2 and 2.1. Then check password without hashing it (or use a very simple hash like the length of the password). Features 3. and 3.2 Replace hard coded user with a persistent user directoy, but a very simple one, e.g. a CSV file. Refinement of feature 2. Calculate the real hash for the password. Feature 3.1. Switch to the final user directory technology. Each feature provides an opportunity to deliver results in a short amount of time and get feedback. If you´re in doubt whether you can implement the whole entry point function until tomorrow night, then just go for a couple of features or even just one. That´s also why I think, you should strive for wrapping feature logic into a function of its own. It´s a matter of Evolvability and Production Efficiency. A function per feature makes the code more readable, since the language of requirements analysis and design is carried over into implementation. It makes it easier to apply changes to features because it´s clear where their logic is located. And finally, of course, it lets you re-use features in different context (read: increments). Feature functions make it easier for you to think of features as Spinning increments, to implement them independently, to let the product owner check them for acceptance individually. Increments consist of features, entry point functions consist of feature functions. So you can view software as a hierarchy of requirements from broad to thin which map to a hierarchy of functions - with entry points at the top.   I like this image of software as a self-similar structure on many levels of abstraction where requirements and code match each other. That to me is true agile design: the core tenet of Agility to move forward in increments is carried over into implementation. Increments on paper are retained in code. This way developers can easily relate to product owners. Elusive and fuzzy requirements are not tangible. Software production is moving forward through requirements one increment at a time, and one function at a time. In closing Product owners and developers are different - but they need to work together towards a shared goal: working software. So their notions of software need to be made compatible, they need to be connected. The increments of the product owner - user stories and features - need to be mapped straightforwardly to something which is relevant to developers. To me that´s functions. Yes, functions, not classes nor components nor micro services. We´re talking about behavior, actions, activities, processes. Their natural representation is a function. Something has to be done. Logic has to be executed. That´s the purpose of functions. Later, classes and other containers are needed to stay on top of a growing amount of logic. But to connect developers and product owners functions are the appropriate glue. Functions which represent increments. Can there always be such a small increment be found to deliver until tomorrow evening? I boldly say yes. Yes, it´s always possible. But maybe you´ve to start thinking differently. Maybe the product owner needs to start thinking differently. Completion is not the goal anymore. Neither is checking the delivery of an increment through the user interface of a software. Product owners need to become comfortable using test beds for certain features. If it´s hard to slice requirements thin enough for Spinning the reason is too little knowledge of something. Maybe you don´t yet understand the problem domain well enough? Maybe you don´t yet feel comfortable with some tool or technology? Then it´s time to acknowledge this fact. Be honest about your not knowing. And instead of trying to deliver as a craftsman officially become a researcher. Research an check back with the product owner every day - until your understanding has grown to a level where you are able to define the next Spinning increment. ? Sometimes even thin requirement slices will cover several Entry Points, like “Add validation of email addresses to all relevant dialogs.” Validation then will it put into a dozen functons. Still, though, it´s important to determine which Entry Points exactly get affected. That´s much easier, if strive for keeping the number of Entry Points per increment to 1. ? If you like call Entry Point functions event handlers, because that´s what they are. They all handle events of some kind, whether that´s palpable in your code or note. A public void btnSave_Click(object sender, EventArgs e) {…} might look like an event handler to you, but public static void Main() {…} is one also - for then event “program started”. ?

  Read the article

• When I shutdown the computer, it restarts

  - by Prabu

  I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

  Read the article

• Curious about IObservable? Here’s a quick example to get you started!

  - by Roman Schindlauer

  Have you heard about IObservable/IObserver support in Microsoft StreamInsight 1.1? Then you probably want to try it out. If this is your first incursion into the IObservable/IObserver pattern, this blog post is for you! StreamInsight 1.1 introduced the ability to use IEnumerable and IObservable objects as event sources and sinks. The IEnumerable case is pretty straightforward, since many data collections are already surfacing as this type. This was already covered by Colin in his blog. Creating your own IObservable event source is a little more involved but no less exciting – here is a primer: First, let’s look at a very simple Observable data source. All it does is publish an integer in regular time periods to its registered observers. (For more information on IObservable, see http://msdn.microsoft.com/en-us/library/dd990377.aspx ). sealed class RandomSubject : IObservable<int>, IDisposable {     private bool _done;     private readonly List<IObserver<int>> _observers;     private readonly Random _random;     private readonly object _sync;     private readonly Timer _timer;     private readonly int _timerPeriod;       /// <summary>     /// Random observable subject. It produces an integer in regular time periods.     /// </summary>     /// <param name="timerPeriod">Timer period (in milliseconds)</param>     public RandomSubject(int timerPeriod)     {         _done = false;         _observers = new List<IObserver<int>>();         _random = new Random();         _sync = new object();         _timer = new Timer(EmitRandomValue);         _timerPeriod = timerPeriod;         Schedule();     }       public IDisposable Subscribe(IObserver<int> observer)     {         lock (_sync)         {             _observers.Add(observer);         }         return new Subscription(this, observer);     }       public void OnNext(int value)     {         lock (_sync)         {             if (!_done)             {                 foreach (var observer in _observers)                 {                     observer.OnNext(value);                 }             }         }     }       public void OnError(Exception e)     {         lock (_sync)         {             foreach (var observer in _observers)             {                 observer.OnError(e);             }             _done = true;         }     }       public void OnCompleted()     {         lock (_sync)         {             foreach (var observer in _observers)             {                 observer.OnCompleted();             }             _done = true;         }     }       void IDisposable.Dispose()     {         _timer.Dispose();     }       private void Schedule()     {         lock (_sync)         {             if (!_done)             {                 _timer.Change(_timerPeriod, Timeout.Infinite);             }         }     }       private void EmitRandomValue(object _)     {         var value = (int)(_random.NextDouble() * 100);         Console.WriteLine("[Observable]\t" + value);         OnNext(value);         Schedule();     }       private sealed class Subscription : IDisposable     {         private readonly RandomSubject _subject;         private IObserver<int> _observer;           public Subscription(RandomSubject subject, IObserver<int> observer)         {             _subject = subject;             _observer = observer;         }           public void Dispose()         {             IObserver<int> observer = _observer;             if (null != observer)             {                 lock (_subject._sync)                 {                     _subject._observers.Remove(observer);                 }                 _observer = null;             }         }     } }   So far, so good. Now let’s write a program that consumes data emitted by the observable as a stream of point events in a Streaminsight query. First, let’s define our payload type: class Payload {     public int Value { get; set; }       public override string ToString()     {         return "[StreamInsight]\tValue: " + Value.ToString();     } }   Now, let’s write the program. First, we will instantiate the observable subject. Then we’ll use the ToPointStream() method to consume it as a stream. We can now write any query over the source - here, a simple pass-through query. class Program {     static void Main(string[] args)     {         Console.WriteLine("Starting observable source...");         using (var source = new RandomSubject(500))         {             Console.WriteLine("Started observable source.");             using (var server = Server.Create("Default"))             {                 var application = server.CreateApplication("My Application");                   var stream = source.ToPointStream(application,                     e => PointEvent.CreateInsert(DateTime.Now, new Payload { Value = e }),                     AdvanceTimeSettings.StrictlyIncreasingStartTime,                     "Observable Stream");                   var query = from e in stream                             select e;                   [...]   We’re done with consuming input and querying it! But you probably want to see the output of the query. Did you know you can turn a query into an observable subject as well? Let’s do precisely that, and exploit the Reactive Extensions for .NET (http://msdn.microsoft.com/en-us/devlabs/ee794896.aspx) to quickly visualize the output. Notice we’re subscribing “Console.WriteLine()” to the query, a pattern you may find useful for quick debugging of your queries. Reminder: you’ll need to install the Reactive Extensions for .NET (Rx for .NET Framework 4.0), and reference System.CoreEx and System.Reactive in your project.                 [...]                   Console.ReadLine();                 Console.WriteLine("Starting query...");                 using (query.ToObservable().Subscribe(Console.WriteLine))                 {                     Console.WriteLine("Started query.");                     Console.ReadLine();                     Console.WriteLine("Stopping query...");                 }                 Console.WriteLine("Stopped query.");             }             Console.ReadLine();             Console.WriteLine("Stopping observable source...");             source.OnCompleted();         }         Console.WriteLine("Stopped observable source.");     } }   We hope this blog post gets you started. And for bonus points, you can go ahead and rewrite the observable source (the RandomSubject class) using the Reactive Extensions for .NET! The entire sample project is attached to this article. Happy querying! Regards, The StreamInsight Team

  Read the article

• Unable to connect to Samba printer

  - by user127236

  I have a headless Ubuntu 12.04 server for files and printers. It shares files via Samba just fine. However, the HP PSC-750xi connected to the server via USB is not accessible from my Ubuntu 12.04 laptop. I can browse for it in the Printing control panel, but any attempt to authenticate my ID to the printer with my user credentials results in the error "This print share is not accessible". I have included the Samba smb.conf file below. Any help appreciated. Thanks... JGB # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with ";", the proposed setting # differs from the default Samba behaviour # - When commented with "#", the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. # A well-established practice is to name the original file # "smb.conf.master" and create the "real" config file with # testparm -s smb.conf.master >smb.conf # This minimizes the size of the really used smb.conf file # which, according to the Samba Team, impacts performance # However, use this with caution if your smb.conf file contains nested # "include" statements. See Debian bug #483187 for a case # where using a master file is not a good idea. # #======================= Global Settings ======================= [global] log file = /var/log/samba/log.%m passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . obey pam restrictions = yes map to guest = bad user encrypt passwords = true passwd program = /usr/bin/passwd %u passdb backend = tdbsam dns proxy = no writeable = yes server string = %h server (Samba, Ubuntu) unix password sync = yes workgroup = WORKGROUP syslog = 0 panic action = /usr/share/samba/panic-action %d usershare allow guests = yes max log size = 1000 pam password change = yes ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of # server string is the equivalent of the NT Description field # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects # Cap the size of the individual log files (in KiB). # If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. # Do something sensible when Samba crashes: mail the admin a backtrace ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. # security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. # If you are using encrypted passwords, Samba will need to know what # password database type you are using. # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username ;[homes] ; comment = Home Directories ; browseable = no # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. ; read only = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0700 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes ; valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers browseable = yes writeable = no path = /var/lib/samba/printers # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom [mediafiles] path = /media/multimedia/

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >