Search Results

Search found 8593 results on 344 pages for 'regular expression'.

Page 263/344 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

  • OSB unit testing, part 1 by Qualogy

    - by JuergenKress
    First you need to implement the simple bpel process like this : In my current project, I inherited a lot of OSB components that have been developed by (former) team members, but they all lack unit tests. This is a situation I really dislike, since this makes it much harder to refactor or bug-fix the existing code base. So, for all newly created components (and components I have to bug-fix) I strive to add unit tests. Of course, the unit tests will be created using my favourite testing tool: soapUI ! Unit of test The unit test should be created for the service composition, which in OSB terms should be the proxy service combination with its business service. Now, since you do not want to rely on any other services, you should provide mock services for all services invoked from your Component-Under-Test. In a previous article, I wrote about mocking your services in soapUI. While this approach would also be valid here, creating a mock service (and certainly deploying it on a separate WebServer) does violate one of the core principles of unit testing: to make your unit tests as self-contained as possible, i.e. not depending on any external components. In this article, I will show you how to achieve this by simply providing a mock response inside your unit test. Scenario The scenario I implement for testing is a simple currency converter; the external request consists of a from and a to currency, and an amount (in currency from). The service will perform an exchange rate lookup using the WebServiceX CurrencyConverter and return a response to the caller consisting of both the source and target currencies and amounts. For the purpose of unit testing, I will implement a mock response for the exchange rate lookup. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Qualogy,OSB,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • MVVM and Animations in Silverlight

    - by Aligned
    I wanted to spin an icon to show progress to my user while some content was downloading. I'm using MVVM (aren't you) and made a satisfactory Storyboard to spin the icon. However, it took longer than expected to trigger that animation from my ViewModel's property.I used a combination of the GoToState action and the DataTrigger from the Microsoft.Expression.Interactions dll as described here.Then I had problems getting it to start until I found this approach that saved the day. The DataTrigger didn't bind right away because "it doesn’t change visual state on load is because the StateTarget property of the GotoStateAction is null at the time the DataTrigger fires.". Here's my XAML, hopefully you can fill in the rest.<Image x:Name="StatusIcon" AutomationProperties.AutomationId="StatusIcon" Width="16" Height="16" Stretch="Fill" Source="inProgress.png" ToolTipService.ToolTip="{Binding StatusTooltip}"> <i:Interaction.Triggers> <utilitiesBehaviors:DataTriggerWhichFiresOnLoad Value="True" Binding="{Binding IsDownloading, Mode=OneWay, TargetNullValue=True}"> <ei:GoToStateAction StateName="Downloading" /> </utilitiesBehaviors:DataTriggerWhichFiresOnLoad> <utilitiesBehaviors:DataTriggerWhichFiresOnLoad Value="False" Binding="{Binding IsDownloading, Mode=OneWay, TargetNullValue=True}"> <ei:GoToStateAction StateName="Complete"/> </utilitiesBehaviors:DataTriggerWhichFiresOnLoad> </i:Interaction.Triggers> <Image.Projection> <PlaneProjection/> </Image.Projection> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="VisualStateGroup"> <VisualStateGroup.Transitions> <VisualTransition GeneratedDuration="0" To="Downloading"> <VisualTransition.GeneratedEasingFunction> <QuadraticEase EasingMode="EaseInOut"/> </VisualTransition.GeneratedEasingFunction> <Storyboard RepeatBehavior="Forever"> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationZ)" Storyboard.TargetName="StatusIcon"> <EasingDoubleKeyFrame KeyTime="0:0:1.5" Value="-360"/> <EasingDoubleKeyFrame KeyTime="0:0:2" Value="-360"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualTransition> <VisualTransition From="Downloading" GeneratedDuration="0"/> </VisualStateGroup.Transitions> <VisualState x:Name="Downloading"/> <VisualState x:Name="Complete"/> </VisualStateGroup> </VisualStateManager.VisualStateGroups></Image>MVVMAnimations.zip

    Read the article

  • How to configure a longer version Number in artifactory

    - by claudine
    The version-numbers for our jars have to be longer them x.x.x. We would rather need x.x.x.x to integrate some old-fashioned self-made mechanism. This is, because we tag our software with x.x.x and as soon as we have a delivery to a customer one specific jar has to be build exactly at this point of time to fit to another backend, which communicates with our program. For that reason this one jar has the version 2.3.4.1, when generated and in next delivery of the same Version it is build and named 2.3.4.2. Now artifactory cannot handle this an doesn't save more than x.x.x.2 in some cases. So we thought of maybe edit the regular expression in the maven repository layout (see attached Screenshot) Because testing the path in the field below shows, that it cannot handle the version number. Of course for the rest of our jars still x.x.x has to work.. For Example here is the maven-metadata.xml <?xml version="1.0" encoding="UTF-8"?> <metadata> <groupId>com.firm</groupId> <artifactId>someid</artifactId> <version>1.5.1</version> <versioning> <latest>1.5.1</latest> <release>1.5.1</release> <versions> <version>1.4.62</version> </versions> <lastUpdated>20120926073942</lastUpdated> </versioning> </metadata> The folder structure looks like: someid 1.4.62 1.4.62.1 1.4.62.2 1.4.62.3 If we deploy an new artifact version (1.4.62.1), the maven-metadata.xml contains the 1.4.62.1 version. But the artifactory overrides the version number (1.4.62.x) to (1.4.62) after an unspecified time. It seems that the artifactory only support major, minor and revision numbers, and deletes the buildnumber. Now we looking for a solution do disable this behavior. We use the JFrog Artifactory version 2.5.0 (rev. 13086). Any ideas, maybe? Thanks in andvance

    Read the article

  • JOB OF THE WEEK

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} My name is Pascaline and I am the EMEA Solution Response Manager. I currently have a role open for a Benelux Solution Response Representative to jump-start his/her career in my international team of six people from all across Europe. Key for this exciting role is that you are curious to learn, like networking and constantly want to develop yourself. To help you with that, you will get extensive product trainings and workshops on all Oracle product lines and you will receive sales training. Further, you have the opportunity to get certified on Oracle products through online trainings and workshops. Every month you will also benefit from 1-on-1 sales coaching and regular coaching from me to help you grow and develop your career at Oracle! The role will include the follow-up of marketing events and online marketing activities with current Key Accounts in the Benelux. It is truly a pioneering role at Oracle as it is the first time that an employee will engage in business conversations about all lines of businesses and products ranges with Key Accounts. So are you interested to work in between marketing and sales? Do you want to work for a big IT multinational? Do you want to work abroad after you graduate and do you want to develop yourself? Then please visit this link for more information.

    Read the article

  • Oracle Data Protection: How Do You Measure Up? - Part 1

    - by tichien
    This is the first installment in a blog series, which examines the results of a recent database protection survey conducted by Database Trends and Applications (DBTA) Magazine. All Oracle IT professionals know that a sound, well-tested backup and recovery strategy plays a foundational role in protecting their Oracle database investments, which in many cases, represent the lifeblood of business operations. But just how common are the data protection strategies used and the challenges faced across various enterprises? In January 2014, Database Trends and Applications Magazine (DBTA), in partnership with Oracle, released the results of its “Oracle Database Management and Data Protection Survey”. Two hundred Oracle IT professionals were interviewed on various aspects of their database backup and recovery strategies, in order to identify the top organizational and operational challenges for protecting Oracle assets. Here are some of the key findings from the survey: The majority of respondents manage backups for tens to hundreds of databases, representing total data volume of 5 to 50TB (14% manage 50 to 200 TB and some up to 5 PB or more). About half of the respondents (48%) use HA technologies such as RAC, Data Guard, or storage mirroring, however these technologies are deployed on only 25% of their databases (or less). This indicates that backups are still the predominant method for database protection among enterprises. Weekly full and daily incremental backups to disk were the most popular strategy, used by 27% of respondents, followed by daily full backups, which are used by 17%. Interestingly, over half of the respondents reported that 10% or less of their databases undergo regular backup testing.  A few key backup and recovery challenges resonated across many of the respondents: Poor performance and impact on productivity (see Figure 1) 38% of respondents indicated that backups are too slow, resulting in prolonged backup windows. In a similar vein, 23% complained that backups degrade the performance of production systems. Lack of continuous protection (see Figure 2) 35% revealed that less than 5% of Oracle data is protected in real-time.  Management complexity 25% stated that recovery operations are too complex. (see Figure 1)  31% reported that backups need constant management. (see Figure 1) 45% changed their backup tools as a result of growing data volumes, while 29% changed tools due to the complexity of the tools themselves. Figure 1: Current Challenges with Database Backup and Recovery Figure 2: Percentage of Organization’s Data Backed Up in Real-Time or Near Real-Time In future blogs, we will discuss each of these challenges in more detail and bring insight into how the backup technology industry has attempted to resolve them.

    Read the article

  • Differences between a retail and wholesale website, and how difficult would it be to integrate them? [closed]

    - by kmy
    I was told to come here for some guidance, I know that my questions can be quite broad, but I just really want some kind of direction to go towards (links, articles, etc). So here it goes: For the past month I have been planning and started implementing a wholesale website, but plans got changed on me and I need to allow both retail and wholesale orders which will also depend on whether the account is a regular customer or also has a seller account. There are various types of products and it has been decided that I would use subcategories as tables to organize them and allow various specific item fields. So here are some of my specific questions: How different is the database structure for each item to be available for both wholesale and retail? Will it just be adding a quantity column and have two different pricing, or much more complicated? I am unaware if there's any price tables but would that be more difficult? They use Quickbooks POS software, how difficult/inefficient will it be to update inventory quantities if they have like 2000-4000 products? And what would be the best ways to extract the information and update the system? I know it export an excel spreadsheet so maybe a suggested php plugin for it? How difficult is this project in your professional opinion, and how big should a team usually be? (At the moment it is just me.) Projected time for planning, implementation, and quality assurance in accordance to team size? I am an entry level developer and I know that I do not have enough knowledge to direct myself on this website...What kind of web developer skills will I need to find to help me? (My company is willing to hire people to get this website done as fast as possible.) Also, what would be some great questionnaires to ask the product stakeholder about what he wants from the website? (He has made it clear he is neither computer or internet savvy...) Sorry for the amount of questions, I'm an entry level web developer and do not have a senior to look up to for guidance. I have knowledge in HTML, CSS, Javascript, jQuery, PHP, MySQL, phpMyAdmin. I have never used any frameworks like Zend, Magento, etc, and is doing this all from scratch. So far the website is built in an object oriented way, MVC architecture to the best of my abilities, but I have many doubts because I would really want to have this done right. If I have been unclear on some parts please tell me and I'll add more detail. I'm sure I'll have more additional questions later on, if anyone is open to that please tell me. Thanks in advance!

    Read the article

  • ????Java EE????WebLogic Server???????????|WebLogic Channel|??????

    - by ???02
    20????????????????????????/???????????Java EE???WebLogic Server????????????????IT(????)?????????????????????????????????????/??????????????????????????????????????????/?????????????????????????2011?9?6???????????????????WebLogic & Java EE????????????????????????????Java EE?WebLogic Server????????????(???)?WebLogic Suite?????/?????????????????? ???Java????????????·?????????????????WebLogic & Java EE?????????????????????????? Fusion Middleware?????????????????Oracle WebLogic Server???????????????????????????WebLogic Server????????????????·?????????????????????? ???WebLogic Server??????????????Standard Edition?????????????Enterprise Edition??????????·??????·????????WebLogic Suite??3??????????????????????????WebLogic Suite??????????????WebLogic Server???????????/??????JRockit Flight Recorder????Mission Control???????·???·??????Oracle Coherence????????????????Java??????JRockit Real Time????????????????Oracle Enterprise Manager??????????????????????????????????????????????????????????·??????·??????????????????·???????? ????????????????????WebLogic Server?????????????????????????????·????????????????·??????2????????2??????????????IT???????????????????????????????????????·????????????????IT??????????????????????????????????·???????????????????IT??????????????????????????????????Java????????·????????????????????????????????????????????????????????? ??????????????????????????????????????????????"???"??????????????WebLogic Suite???????????????????????????????????????????????????????????????(???) ???????WebLogic Server?????????????????WebLogic Suite 11g?????????????????????????????????Oracle Database??????????????????4?????? ???????????????????Java EE 5????????????Java EE 6???????????????Eclipse????????????????FastSwap???????????????????????????????????????????????????????? ?????????????????????????JRockit Flight Recorder????????????·????????????????????????????????????????·??????????????????????????????????? Oracle Database?????????????Oracle Real Application Clusters(RAC)??????????Active GridLink for RAC?????????????????RAC???????????????????????·????????????????????????????·?????????????????????????????????RAC?????????WebLogic Server????????????????????????????????????????????????????????????????????????????????????????? ?????????????????·???????2011????????????????WebLogic Server 10.3.6???2012?????????????????WebLogic Server 12.1.1????????WebLogic Server 10.3.6???????·???????Oracle Exalogic Elastic Cloud???WebLogic Server 12.1.1?Java????????????????????????? WebLogic Server 10.3.6????????????Oracle Virtual Assembly Builder???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????WebLogic Server 10.3.6?????????????????InfiniBand????????Socket Direct Protocol??????????? ??????????·???????WebLogic Server 12.1.1???Java EE 6??????????????????Web?????????????????????Java EE 6?????????WebLogic Server????????????????????? ??????????????????????????????WebLogic Suite????????????????????????????????·??????·????????WebLogic Server????????????Java EE????6????????! ????????Java EE 6????-??????????????????????? Fusion Middleware?????? ???Java???????????????????Java??????????????????? ????????????????????????――?Java EE??????????????????????2000???????EJB??????Java EE?????????????????Web???????????????????Struts???Spring Framework??????????????????????????????????Java EE?"?"???????????????????????????????????????????????????????????????????????????????????XML??????????????????????????Java EE??????????(=??)??????? ??????????????????????????????????J2EE 1.4??????Java EE 5???????"??????"???????????????????????????Java EE 6??????????????"??????"???????????????????????????2009?12???????????????????????????(???) ?????????????????????????Java EE 6????????????????????????????????????????????????4?????? ?????????????Java EE???????????????????????????????????????????web.xml?????????????????Java EE 6??????????????????web.xml??????????????????????????????????????????????????????????????????????????????? ????Java EE????????????????????????????Java EE 6??????Web??????????????????Web????????????Java EE??????????????????????????????????????/????????Web???????????????????????? ????????????????????Java EE???????·??????????JavaServer Faces(JSF) 2.0???????????????????????????????????? JSF 2.0??????????????????·????????XHTML???????????????????????·???????(UI)??????????????JSF 1.2???Java Server Pages(JSP)????????????????????????????????????????JSF 2.0???Facelet??????XHTML?????????????????????????????????? ?????EJB??????????????????????????EJB 3.1?????????EJB???????????????????????????????????????·????????????????Java SE???EJB?????????????????????????? ??????????????????????????????????????????·???????????Java EE 5????????Java EE 6?????????Web??????????????????????·??????????Tomcat??????????????·??????????????(???)???????????????????Web?????????????Tomcat?????????????????????? ???????????????Tomcat???????Java Servlet?JSP?Expression Language?????????????????Struts???????????????Web????????????????????????????????????????Web??????????????????????????????????????????????????????????????Java EE 6????????????????????????????? ?Java EE 6?Web???????????Java EE?????????????????Web????????????????????Java EE 6???????WebLogic Server????????????????????????????????????????Web??????????????????????(???) ?????????????????????????????????????????????????????????Java EE 6?????????????????????Java EE 6???"??????"?????????????JRockit Flight Recorder/Mission Control?????????! ??????????????? Fusion Middleware?????????????????Oracle WebLogic Server 11g?????????-???????WebLogic??????!??????????????WebLogic Server?????????????????????????????????????????????????????????????????????????JRockit Flight Recorder?JRockit Mission Control????????????·??????????????? ????????JRockit Flight Recorder(JFR)??Java??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??JFR????????????????????SLA???????????????????????????????? ????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????JRockit?????????????JRockit Mission Control(JMC)?????JFR??????????JFR????????·???????????????????? JFR?????????????????????????????????????????????????????????????????????????·????????????????????????????????????????·?????????????????????????????????????????????????????4???????????????????????JFR???????????????????????????????????????? ???JMC?Eclipse??????????????????????????????????????????·?????????????????????????????????????Eclipse??????JMC????????????????·???????????????????·?????????????????????????????????????? ??????JMC?Eclipse?????????????????????????????????????????UI????????????????????????????????????????????????????????????????????????????????????????????????: ?????????! ?????????????????JRockit Flight Recorder?????*   *   * ???????WebLogic & Java EE??????????????????Java?WebLogic Server????3??????????????????????????????????·?????????????????????????

    Read the article

  • HAProxy reqrep remove URI on backend request

    - by Jim
    real quick question regarding HAProxy reqrep. I am trying to rewrite/replace the request that gets sent to the backend. I have the following example domain and URIs http://domain/web1 http://domain/web2 I want web1 to go to backend webfarm1, and web2 to go to webfarm2. Currently this does happen. However I want to strip off the web1 or web2 URI when the request is sent to the backend. Here is my haproxy.cfg frontend webVIP_80 mode http bind :80 #acl routing to backend acl web1_path path_beg /web1 acl web2_path path_beg /web2 #which backend use_backend webfarm1 if web1_path use_backend webfarm2 if web2_path default_backend webfarm1 backend webfarm1 mode http reqrep ^([^\ ]*)\ /web1/(.*) \1\ /\2 balance roundrobin option httpchk HEAD /index HTTP/1.1\r\nHost:\ example.com server webtest1 10.0.0.10:80 weight 5 check slowstart 5000ms server webtest2 10.0.0.20:80 weight 5 check slowstart 5000ms backend webfarm2 mode http reqrep ^([^\ ]*)\ /web2/(.*) \1\ /\2 balance roundrobin option httpchk HEAD /index HTTP/1.1\r\nHost:\ example.com server webtest1-farm2 10.0.0.110:80 weight 5 check slowstart 5000ms server webtest2-farm2 10.0.0.120:80 weight 5 check slowstart 5000ms If I go to http://domain/web1 or http://domain/web2 I see it in the error logs that the request on a server in each backend that the requst is for the resource /web1 or /web2 respectively. Therefore I believe there to be something wrong with my regular expression, even though I copied and pasted it from the Documentation. http://code.google.com/p/haproxy-docs/wiki/reqrep Summary: I'm trying to route traffic based on URI, however I want to strip the URI on the backend side. Go to http://domain/web1 -- backend request of / to webfarm1 Thank you! -Jim

    Read the article

  • Zabbix Log Monitoring - Duplicate alerts

    - by ArunS
    I am configured Zabbix to monitor my Jboss Server logs for Erros and exclude some know errors. This setup is working with one issue. Zabbix will send me alerts when there is a new "ERROR" entry in the log file. But sometimes I get multiple alerts for the same event. For example, I got 5 alerts with the same time stamp "2012-06-25 07:55:56,864 ERROR". The duplicate alerts count is not constant, sometimes I get 2 sometimes 5 or 11. I checked the Monitoring Latest data in the GUI, and found that there is no duplicate entries. I have given my configuration of the log monitoring below. I am using latest version of zabbix server(2.0) Item configuration: Description: Server Error Monitoring. Key: log["/SERVER/jboss/jboss-5/server/ps/log/server.log","ERROR",UTF-8,200,skip] Type: Zabbix Agent (Active) Type of information: Log Interval :30 Trigger configuration: Description: Found Error in Server Log. Expression: (({SERVER Error Monitoring - PS:log["/SERVER/jboss/jboss-5/server/ps/log/server.log","ERROR",UTF-8,200,skip].regexp("can not execute")})=0) & (({SERVER Error Monitoring - PS:log["/SERVER/jboss/jboss-5/server/ps/log/server.log","ERROR",UTF-8,200,skip].regexp("Unexpected redirect")})=0) Event generation: Normal + Multiple TRUE events Action configuration: Name: alert mail Event source: Trigger Enable escalations: Uncheck Default subject/message: Default Recovery message: Uncheck Action conditions: Trigger value = PROBLEM Action operations: Send message to User "Admin" Please help me fixing this issue.

    Read the article

  • WmiPrvSE memory leak on Windows 2008 *R2*

    - by MichaelGG
    I've seen references on Windows 2008 to WmiPrvSE leaks, but nothing about Windows 2008 R2. We're running R2 on top of Hyper-V (2008). We are also running NSClient++ for monitoring from opsview. Over time, WmiPrvSE.exe starts to use a lot of memory, causing memory alert issues (less than 10% free). VM has 2GB, WmiPrvSE consumes up to 500-600MB before I kill it. Killing the process doesn't seem to have any negative effect; it starts up again and I haven't noticed any problems. But after a day or two, it's back in the same situation. Any ideas on what to do? Resource Monitor doesn't show any Disk or Network IO by WmiPrvSE.exe. Just slowly climbing private memory... Edited to add: We aren't running clustering, or Windows System Resource Manager. The only regular WMI user I can guess is NSClient++, but we don't seem to have this problem on other servers.

    Read the article

  • How many bits for sequence number using Go-Back-N protocol.

    - by Mike
    Hi Everyone, I'm a regular over at Stack Overflow (Software developer) that is trying to get through a networking course. I got a homework problem I'd like to have a sanity check on. Here is what I got. Q: A 3000-km-long T1 trunk is used to transmit 64-byte frames using Go-Back-N protocol. If the propagation speed is 6 microseconds/km, how many bits should the sequence numbers be? My Answer: For this questions what we need to do is lay the base knowledge. What we are trying to find is the size of the largest sequence number we should us using Go-Back-N. To figure this out we need to figure out how many packets can fit into our link at a time and then subtract one from that number. This will ensure that we never have two packets with the same sequence number at the same time in the link. Length of link: 3,000km Speed: 6 microseconds / km Frame size: 64 bytes T1 transmission speed: 1544kb/s (http://ckp.made-it.com/t1234.html) Propagation time = 6 microseconds / km * 3000 km = 18,000 microseconds (18ms). Convert 1544kb to bytes = 1544 * 1024 = 1581056 bytes Transmission time = 64 bytes / 1581056bytes / second = 0.000040479 seconds (0.4ms) So then if we take the 18ms propagation time and divide it by the 0.4ms transmission time we will see that we are going to be able to stuff ( 18 / 0.4) 45 packets into the link at a time. That means that our sequence number should be 2 ^ 45 bits long! Am I going in the right direction with this? Thanks, Mike

    Read the article

  • i5 540M or i7 720QM for laptop running VMs and software development tools?

    - by Donald Hughes
    I'm a software developer that would primarily be running Windows 7 as the primary operating system. On a typical day, I might, at any given moment, be running Visual Studio, Expression Web, SQL Server developer (and Management Console), IIS, Photoshop, a dozen browser tabs in 2-3 different browsers, Skype video chat, streaming music, and a couple of VMs (WinXP and Ubuntu) for testing/experimentation. Obviously, RAM is a concern, which is why I plan to use 8 GB so I can devote enough to the VMs to be usable. I'm also tempted to use an ExpressCard SSD for storing the VM disks to ease disk contention. And I know that that is asking a lot from a laptop, and I should just use a desktop, but I need to be able to take my work with me between several locations. It seems that at a reasonable price point, it comes down to the i5 540M versus the i7 720QM. I'm leaning toward the i7 since it would allow me to dedicate a whole hyperthreaded core to each VM, and still have two cores left for the primary OS. I've heard that the i5 has better battery life, but I'm curious for my scenario if there would be a meaningful difference. I don't usually work without a plug, but I do occasionally ride the train or fly and it would be nice to have at least 3 hours of juice for unusual circumstances. And, finally, for this usage scenario, would a dedicated video option be preferred over the i5's integrated video? It sounds like Visual Studio 2010 (and Windows 7) can take advantage of the video card.

    Read the article

  • Configure Postfix to send/relay emails Gmail (smtp.gmail.com) via port 587

    - by tom smith
    Hi. Using Centos 5.4, with Postfix. I can do a mail [email protected] subject: blah test . Cc: and the msg gets sent to gmail, but it resides in the spam folder, which is to be expected. My goal is to be able to generate email msgs, and to have them appear in the regular Inbox! As I understand Postfix/Gmail, it's possible to configure Postfix to send/relay mail via the authenticated/valid user using port 587, which would no longer have the mail be seen as spam. I've tried a number of parameters based on different sites/articles from the 'net, with no luck. Some of the articles, actually seem to conflict with other articles! I've also looked over the stacflow postings on this, but i'm still missing something... Also talked to a few people on IRC (Centos/Postfix) and still have questions.. So, i'm turning to Serverfault, once again! If there's someone who's managed to accomplish this, would you mind posting your main.cf, sasl-passwd, and any other conf files that you use to get this working! If I can review your config files, I can hopefully see where I've screwed up, and figure out how to correct the issue. Thanks for reading this, and any help/pointers you provide! ps, If there is a stackflow posting that speaks to this that I may have missed, feel free to point it out to me! -tom

    Read the article

  • How do I host node.js apps with pm2 without running them as root?

    - by jishi
    I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

    Read the article

  • Over 200 active requests like "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)"

    - by Stefan Lasiewski
    Some details: Webserver: Apache/2.2.13 (FreeBSD) mod_ssl/2.2.13 OpenSSL/0.9.8e OS: FreeBSD 7.2-RELEASE This is a FreeBSD Jail. I believe I use the Apache 'prefork' MPM (I run the default for FreeBSD). I use the default values for MaxClients (256) I have enabled mod_status, with "ExtendedStatus On". When I view /server-status , I see a handful of regular requests. I also see over 230 requests from the 'localhost', like these: 37-0 - 0/0/1 . 0.00 1510 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 38-0 - 0/0/1 . 0.00 1509 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 39-0 - 0/0/3 . 0.00 1482 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 40-0 - 0/0/6 . 0.00 1445 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 I also see about 2417 requests yesterday from the localhost, like these: Apr 14 11:16:40 192.168.16.127 httpd[431]: www.example.gov 127.0.0.2 - - [15/Apr/2010:11:16:40 -0700] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The page at http://wiki.apache.org/httpd/InternalDummyConnection says "These requests are perfectly normal and you do not, in general, need to worry about them", but I'm not so sure. Why are there over 230 of these? Are these active connections? If I have "MaxClients 256", and over 230 of these connections, it seems that my webserver is dangerously close to running out of available connections. It also seems like Apache should only need a handful of these "internal dummy connections" We actually had two unexplained outages last night, and I am wondering if these "internal dummy connection" caused us to run out of available connections.

    Read the article

  • Apache+LDAP auth on Ubuntu says "Can't contact LDAP server" while ldapsearch is perfect

    - by tw79
    Hi Gurus, I'm migrating from an existing apache+LDAP+mysql+php server to a new hardware platform. Old server is running Debian Lenny, which I have no config documentation available (was done by previous sysadmin); New server is running Ubuntu 10.04.2 LTS 32bit. After installing Apache and configured LDAP client on the new server, ldapsearch to the LDAP master (another dedicated server) returns results just fine. However, when using apache with https, logs complain that "Can't contact LDAP server". I'm authenticating using ldaps and can confirm that 636 port is open on the LDAP master. I can't understand why apache would fail while regular ldapsearch is working! Below is part of the virtualhost config: <Directory /> Options FollowSymLinks AllowOverride None #AuthLDAPEnabled on AuthType Basic AuthBasicProvider ldap AuthName "Private" AuthLDAPURL ldaps://master.ldap.organisation.com:636/ou=people,dc=organisation,dc=com?uid AuthzLDAPAuthoritative off require valid-user AddType application/x-httpd-php .php .phtml <IfModule mod_php4.c> php_flag magic_quotes_gpc Off php_flag track_vars On php_value include_path . </IfModule> </Directory> Any help/suggestion is very much appreciated!

    Read the article

  • Avoiding DNS timeouts when a dns server fails

    - by user65124
    Hi there. We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

    Read the article

  • Nginx case-insensitive reverse proxy rewrites

    - by BrianM
    I'm looking to setup an nginx reverse proxy to make some upcoming server moves and load balanced implementations much easier within our apps. Since our servers are all IIS case sensitivity hasn't been an issue, but now with nginx it's becoming one for me. I am simply looking to do a rewrite regardless of case. Infrastructure notes: All backend servers are IIS Most services are WCF services I am trying to simplify the URLs so I can move services around as we continue to build out I can't set my location to case insensitive due to the following error: nginx: [emerg] "proxy_pass" cannot have URI part in location given by regular expression, or inside named location, or inside "if" statement, or inside "limit_except" block in /etc/nginx/sites-enabled/test.conf:101 The main part of my conf file where I am trying to handle the rewrite is as follows location /svc_test { proxy_set_header x-real-ip $remote_addr; proxy_set_header x-forwarded-for $proxy_add_x_forwarded_for; proxy_set_header host $http_host; proxy_pass http://backend/serviceSite/WFCService.svc; } location ~* /test { rewrite ^/(.*)/$ /svc_test/$1 last; } It's the /test location that I can't get figured out. If I call http://nginxserver/svc_test/help I get the WCF help page to display correctly and I can make all available REST calls. This HAS to be a boneheaded regex issue on my part, but I have tried several variations and all I can get are 404 or 500 errors from nginx. This is NOT rocket science so can someone point me in the right direction so I can look like an idiot and just move on?

    Read the article

  • Active RDP session over VPN getting disconnected

    - by Wandering Penguin
    I am having seemingly random disconnects of active RDP sessions (I am actively typing or otherwise interacting with the desktop) when connected over the VPN connection. The attempted to reconnect 1/20 pops up and proceeds all the way through 20 then drops. Once the session drops I can open a new session and connect again. This started happening about a week ago, The VPN connection is an IPSec VPN connection from a SonicWall NSA 2400. The NIC drivers are up to date. The VPN client is up to date. The firmware on the SonicWall is up to date (both regular and the early-release versions work the same). I have attempted to connect over three ISPs all with the same behavior. Two different workstations were used to test the VPN connection. The same behavior occurs when connecting to a domain workstation or server. If I am within the firewall I can connect to the same workstations and servers with the disconnect. The VPN connection has "enable fragmented packet handling" and "ignore DF (don't fragment) bit" set. Is there something I am missing in where I am looking for the problem?

    Read the article

  • What kind of “sysadmin stuff” should I show to students during a talk?

    - by Gregory Eric Sanderaon
    A teacher asked me If I could talk about my job as a linux sysadmin in his class. The course is called "Introduction to Operating systems" and i've been given 45 minutes to talk. The students are beginning their second year, so they've had a bit of experience with programming in different languages. What i'm like to do is show a series of hands-on examples of the kinds of things I do on a regular basis. I've already got a few ideas jotted down, but I'm afraid that they might be either too advanced or too simple for the students to appreciate. Another concern is that a topic might be too long to explain and use too much time overall. Here are a few ideas : Program deployment using version control (git in my case) filtering apache logs using grep, awk, uniq, tail A couple of bash scripts that i've made for various stuff on servers live montitoring (htop, iotop, iptraf) creating databases and assigning roles in mysql/postgresql So, are these ideas any good ? Do you have better ideas ? are the ideas too simple and should I go for more "advanced" stuff ?

    Read the article

  • OpenVpn Iptables Error

    - by Mook
    I mean real newbie - linux here.. Please help me configuring my openvpn through iptables. My main goal here is to open port for regular browsing (80, 443), email (110, 25), etc just like isp does but i want to block p2p traffic. So I will need to open only few port. Here are my iptables config # Flush all current rules from iptables # iptables -F iptables -t nat -F iptables -t mangle -F # # Allow SSH connections on tcp port 22 (or whatever port you want to use) # iptables -A INPUT -p tcp --dport 22 -j ACCEPT # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP #using DROP for INPUT is not always recommended. Change to ACCEPT if you prefer. iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept packets belonging to established and related connections # iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # #Accept connections on 1194 for vpn access from clients #Take note that the rule says "UDP", and ensure that your OpenVPN server.conf says UDP too # iptables -A INPUT -p udp --dport 1194 -j ACCEPT # #Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT #10.8.0.0 ? Check your OpenVPN server.conf to be sure iptables -A FORWARD -j REJECT iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source 100.200.255.256 #Use your OpenVPN server's real external IP here # #Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 26 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -L -v But when I connect to my vpn, i can't browsing and also got RTO on pinging yahoo, etc

    Read the article

  • Vista logs into black screen, "Application Error 0xc0000022" for explorer.exe

    - by IMAPC
    Whenever I attempt to log into a Windows Vista computer (the only account on it), I'm presented with a black screen & a cursor. I can open Task Manager, and from there I can launch applications. It seems to be using Aero Basic (instead of the full Aero which I had set as default before the problem started). When attempting to launch "explorer.exe" I get "explorer.exe - Application Error 'The application failed to initialize properly (0xc0000022). Click OK to terminate the application.'" Every now and then I get an error along the lines of "the application has failed to start because its side by side configuration is incorrect please see the application event log for more detail." I can boot into safe mode successfully, but I still get the black screen when I log into it in regular mode. I've tried most of the suggestions here, but did not work. I'm attempting to back up everything right now in case the only fix is to reinstall Windows. Has anyone seen this before?

    Read the article

  • Unconvert Text File from Binary Format

    - by Hammer Bro.
    I've got a rather large CSV file (~700MB) which I know to consist of lines of 27-character alpha-numeric hashes; no commas or anything fancy. Somehow, during its migration from Windows to Linux (via winSCP and then a few regular SCPs), it has converted into some kind of binary format I am unfamiliar with. If I open the file in vi, everything appears fine, and it says [converted] at the bottom, although I know it's not a line endings issue (and dos2unix doesn't help). If I 'head' the file, it looks proper except for a "ÿþ" at the beginning of the first line. If I open up the file in nano, however, I see the "ÿþ" at the start and then "^@" before every character (even newlines and EoF). If I try to re-save or copy the file (say via: head file.csv short.txt), this special encoding is preserved. I copied the first ten lines out of vi (which displays it properly) into my Windows clipboard via my SSH client, then pasted it into a new text file, test.txt. This file is visually identical when opened in vi (and similar through 'head', minus the "ÿþ"), although it's roughly half of the filesize. Additionally, file test.txt test.txt: ASCII text file short.txt short.txt: I have no idea what format this once-text file got converted to (it's notoriously hard to search the internet for symbols), but surely there must be some way to convert it back. Any ideas?

    Read the article

  • Configuration management in support of scientific computing

    - by Sharpie
    For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

    Read the article

  • Configuration management in support of scientific computing

    - by Sharpie
    For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

    Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >