Search Results

Search found 9318 results on 373 pages for 'rescue disk'.

Page 264/373 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• Computer Locks Up Completely When Resuming From Standby

  - by kcoppock

  Okay, so I'm having a strange issue lately with my desktop, and off the top of my head I'm not sure what the problem is, so I'm hoping for some ideas on how to track down the cause. First, my PC: AMD Phenom 9600 Quad-Core 2.4 GHz 4 GB DDR2 160 GB boot HDD 1 TB & 120 GB secondary HDD Nvidia GeForce 8600 GTS Windows 7 Professional 64-bit I have my power settings as follows: Turn off the display: 10 minutes Turn off hard disk: 20 minutes Sleep after: Never After a while, I'll come back to use my computer again, wiggle the mouse, and the screen comes back on like normal, but the desktop is unresponsive. I can move the cursor, but nothing responds to clicks or keyboard entry. If I click a few times with the mouse, the computer eventually locks up completely and the mouse cursor stops moving as well. After I restart, everything works just fine. Is there a log you recommend checking or really any suggestions would be welcome at this point. Thanks!

  Read the article

• Create a Windows 7 System Repair ISO?

  - by MaDMaD Mad

  According to the Microsoft website I can run "Create a system repair disc" from the start menu to burn a recovery Disc. However, there are many situations (including not having a disk drive) where this cannot be done. My goal is to create a bootable USB drive according to this guide but their method to do so without burning a physical disc includes downloading an ISO from "somebody's" website. I don't know who "somebody" is and I feel it is reasonable to not boot something I can't verify as being untampered with. To the best of my knowledge, Microsoft does not host a recovery disc ISO for download as this would be the easiest solution. So my problem is that I'd like to circumvent Microsofts "burn to disc" option with a "burn to ISO" through any reasonable means.

  Read the article

• Is this a valid backup strategy for MongoDB?

  - by James Simpson

  I've got a single dedicated server with a MongoDB database of around 10GB. I need to do daily backups, but I can't have downtime with the database. Is it possible to use a replica set on a single disk (with 2 instances of mongod running on different ports), and simply take the secondary one offline and backup the data files to an offsite storage such as S3 (journaling is turned on)? Or would using master/slave be better than a replica set? Is this viable, and if so, what potential problems could I have? If not, how do I conceptualize this to work?

  Read the article

• Pervasive database backup

  - by Steven

  I'm looking for the best way to backup my pervasive database. I've read the documentation but still have a few questions. It appears that Continuous Operations method only allows me to backup the entire database? So I'd do butil -startbu @filelist, then backup the entire database (copy, rsync, etc), then run butil -endbu @filelist. Looking through the documentation I don't see a way to get transaction logs out of this method; like I would do for MSSQL (BACKUP LOG ACCT TO DISK) or Postgres (archive_command). With rsync, it might be feasible to still do this every 15 minutes. The Archival Logging method means I would have to occasionally stop the database to get a full backup, which is acceptable for me. But can I copy the log files off of the server every 15 minutes, ie log shipping? Thank you.

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• Cloud based backup solutions based on open standards?

  - by Rick

  I am looking for a solution to backup and consolidate important media from a couple Windows laptops and Mac laptop. I would like a solutions that based on open standards, so my data isn't trapped by proprietary formats and proprietary protocols. I would like the ability to switch clients or change providers in the future. For example, something like Jungle Disk plus S3 sounds like a great option. However, I am having trouble confirming how or if this can be setup meeting this criteria. Are there any real or de-facto standards for treating S3 as a filesystem? If so, what Windows and Mac clients support these standards?

  Read the article

• how to troubleshoot shutdown problems in windows 7

  - by Ieyasu Sawada

  I have a desktop with windows 7 ultimate installed. Whenever I shut it down from the start button. The text that says that it is logging off and shutting down is present and the monitor blacks out and says no signal. But the lights in the RAM is still on and all the fans in the desktop is still spinning. Why is that? It seems like its not shutting down completely. I have also got disk problems lately. Event id 175 and 50. Which I think is caused by the computer not shutting down completely. How do I troubleshoot this one? Feel free to ask if you need more details, thanks.

  Read the article

• Shared volume for data (multiple MDF) and another shared volume for logs (multiple LDF)

  - by hagensoft

  I have 3 instances of SQL Server 2008, each on different machines with multiple databases on each instance. I have 2 separate LUNS on my SAN for MDF and LDF files. The NDX and TempDB files run on the local drive on each machine. Is it O.K. for the 3 instances to share a same volume for the data files and another volume for the log files? I don't have thin provisioning on the SAN so I would like to not constaint disk space creating multiple volumes because I was adviced that I should create a volume (drive letter) for each instance, if not for each database. I am aware that I should split my logs and data files at least. No instance would share the actual database files, just the space on drive. Any help is appretiated.

  Read the article

• Problem opening password encrypted .docx file on Word 2003

  - by molecule

  Hi all, I am having a problem opening a .docx file on my Word 2003. I have installed the Compatibility pack for 2007 but when i try to open this particular file, I receive the error "Word experienced an error trying to open the file. Try these suggestions. 1. Check the file permissions for the document, 2. Make sure there is sufficient free memory and disk space, 3. Open the file with the Text Recovery converter. I do not think it is any of the errors as I am able to open it on a different PC with Word 2003 as well. I also do not have any issues opening any non-password encrypted .docx files. Has anyone experienced the same issue? Most posts on the internet relate to "open and repair" but as mentioned, I am able to open this file on another PC without any problems. Any advice is greatly appreciated. Thanks, George

  Read the article

• How can I diagnose cache misses when using Apache as a reverse proxy?

  - by johnstok

  I have set up Apache 2.2 as a reverse proxy with the following configuration: # jBoss proxying ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /foo http://localhost:9080/foo ProxyPassReverse /foo http://localhost:9080/foo ProxyPassReverseCookiePath /foo /foo # Reverse proxy caching CacheEnable disk /foo # Compression SetOutputFilter DEFLATE BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE\s(7|8) !no-gzip !gzip-only-text/html DeflateCompressionLevel 9 Header append Vary User-Agent env=!dont-vary However, in a number of cases where I expect a cached response to be returned the request is sent through to the origin server at localhost:9080. Responses have a HTTP Vary header of 'Accept-Encoding,User-Agent' which is to be expected given the mod_deflate configuration. How can I determine why Apache is unable to serve a response from the cache?

  Read the article

• Windows 7 Public Documents Folder - how to move it to drive d:

  - by Bazza Formez

  Hi, I've just bought a new pc, and it is running Windows 7. I'm wanting to set up all of the documents folders such that they point to folders on a second drive partition (ie. disk D:) so that I have a nice separation of os from docs. I have managed to do this for each user on the machine (by opening up properties for documents folder and changing location). Hwoever, this procedure doesn't seem to work for the public documents folder. I cannot change the location for that one (even though I have administrator privileges). It is greyed out and cannot be changed. Any ideas ? Thanks!!

  Read the article

• Possible to use DRBD on two ESXi virtualized servers?

  - by chen

  I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

  Read the article

• Feeding the kernels entropy source from other machines and/or increasing its maximum size

  - by David Spillett

  We have has a little trouble with a small box that acts as a VPN end-point and mail relay for our network, caused by the available entropy for /dev/random being too low (which causes TLS connection attempts by exim to fail). The machine doesn't do anything else, so the normal feed into the entropy pool (interrupt timings from things like disk access) is not enough. As a quick hack I've set a looping script that reads from /dev/hda at a couple of Mbyte/sec which keeps it topped up. Other than buying a hardware RNG, is there a clean way of piping data for entry from elsewhere, such as a copy of the data our file server uses for its entropy source? I've spotted several tips for using rng-tools to feed it from /dev/urandom on the same machine but that "feels dirty". Also, is it possible to increase the maximum pool size? It currently seems to max out at 3585.

  Read the article

• How can I format a USB drive as FAT from a MacBook Pro?

  - by Edward Tanguay

  I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

  Read the article

• How to determine non-movable files in Windows 7?

  - by David

  Is there a way to determine which unmovable files are preventing Shrink Volume from releasing the full potential free space? Background: I have a 90 GB partition with Windows 7 on it, and 60 GB free space. I want to shrink it down to about 40 GB, and use the reclaimed 50 GB for a separate data partition. The Shrink Volume tool in Disk Management is only willing to give me 8 GB back. My understanding is that this is because of immovable files. I've followed the instructions found here, which involved disabling hibernation, pagefile, system restore, kernal dump, making sure all related files were deleted, and defrag'ing. I have successfully followed those same instructions before on this same drive, and partitoned the original 150 GB space into 90 GB and 60 GB, but I'm not so lucky this time.

  Read the article

• What are best monitoring tool customizable for cluster / distributed system?

  - by Adil

  I am working on a system having multiple servers. I am interested in monitoring some server specific data like CPU/memory usage, disk/filesystem usage, network traffic, system load etc. and some other my process specific data. What are available open source that can serve my purpose? If it provides to customize the parameter to be monitored and monitor your own data by creating plugin / agent. Any suggestions? I heard of Nagios, Zabbix and Pandora but not sure if they provide such interface.

  Read the article

• Which built-in account is used for Anonymous Authentication in IIS 7?

  - by smwikipedia

  We know that Microsoft IIS 7.0 offer a slew of authentication methods such as Anonymous Authentication, Form Based Authentication, Digest Authentication, etc. I read from Professional IIS 7 published by Wrox that: When we use Anonymous Authentication, the end-user does not supply credentials, effectively mak- ing an anonymous request. IIS 7.0 impersonates a fixed user account when attempting to process the request (for example, to read the file off the hard disk). So, what is the fixed user account impersonated by IIS? Where can I see it? If I don't know what this account is, how could I assign proper permissions for the clients who are authenticated as anonymous users? Thanks.

  Read the article

• Cloning a linux system from sdx to cciss

  - by churnd

  I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

  Read the article

• Does ZFS cache Compressed or Uncompressed data in a ZFS file-system with compression turned on?

  - by George Bailey

  ZFS supports file-system compression and it also caches frequently or recently accessed data. If a system has lots of CPU but the underlying data storage system is slow. It is possible that ZFS would perform better with compression turned on. This can be easily tested when writing files by measuring CPU and disk usage and throughput. (of course latency may exist,, but this would not be an issue for large files). But what about cache? If data will have to be decompressed every time it is read then this is probably less of a good idea. Is the cached data compressed?. Does anybody have some information on this?

  Read the article

• How long do uploaded files stay in the tmp folder in Linux Ubuntu?

  - by Jean-Nicolas Boulay Desjardins

  I am building a web application where my users will be able to upload files. After the files are uploaded I need to send the files to two other servers, and after they will be deleted from the server where they were just uploaded to. I am wandering is it a good I idea to keep the uploaded files in the tmp/ folder the time the uploaded files are sent to the other two servers or should I move them to another folder incase they get deleted? I am also wandering because I would like to know if I have to build a cron script to get rid of the files that have been transfered to the other servers so that I get my disk space back.

  Read the article

• How to resize root LVM partition in Fedora without LiveCD or Rebooting

  - by Cerin

  I have a virtual machine that recently had its disk image increased from 20GB to 50GB, and fdisk -l verifies that the VM can see this new size. Now I need to resize my root LVM partition to fill the extra 30GB. I've found several articles about resizing LVM, but the few that cover resizing the root partition all claim you need to boot from a LiveCD. Is there any way to do this without taking down the server? The server is critical, so I'd like to minimize downtime.

  Read the article

• Raid on ICH9R chip set

  - by user500982

  Hi Im looking at buyign this MB: http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm Im wondering though if the chipset will support the raid configuration I need. Im looking to configure the following arrays: raid array 1: 2 2TB Disks in Raid 0 raid array 2: 2 2TB Disks in Raid 0 raid array 3 (not actualy an array): 1 300GB Disk not in raid, to be used for OS and boot. So in total there would be 5 drives and the board supports 6. so im good when it comes to connections. However I have herd some chip sets only support one raid array (volume). so either all drives are individual, or are in the array. I must have 2 sperate raid arrays independent of each other, and a 5th drive not in any array. Anybody know if this setup will work? Thanks, -Stewart

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >