Search Results

Search found 10482 results on 420 pages for 'virtual lab'.

Page 265/420 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

• OpenIndiana (illumos): vmxnet3 interface lost on reboot

  - by protomouse

  I want my VMware vmxnet3 interface to be brought up with DHCP on boot. I can manually configure the NIC with: # ifconfig vmxnet3s0 plumb # ipadm create-addr -T dhcp vmxnet3s0/v4dhcp But after creating /etc/dhcp.vmxnet3s0 and rebooting, the interface is down and the logs show: Aug 13 09:34:15 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:15 neumann vmxnet3s: [ID 715698 kern.notice] vmxnet3s:0: stop() Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:17 neumann vmxnet3s: [ID 920500 kern.notice] vmxnet3s:0: start() Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(TxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxBufPoolLimit) -> 512 Aug 13 09:34:17 neumann nwamd[491]: [ID 605049 daemon.error] 1: nwamd_set_unset_link_properties: dladm_set_linkprop failed: operation not supported Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x20000) -> no Aug 13 09:34:17 neumann nwamd[491]: [ID 751932 daemon.error] 1: nwamd_down_interface: ipadm_delete_addr failed on vmxnet3s0: Object not found Aug 13 09:34:17 neumann nwamd[491]: [ID 819019 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv4 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 160156 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv6 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 771489 daemon.error] 1: add_ip_address: ipadm_create_addr failed on vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 405346 daemon.error] 9: start_dhcp: ipadm_create_addr failed for vmxnet3s0: Operation not supported on disabled object I then tried disabling network/physical:nwam in favour of network/physical:default. This works, the interface is brought up but physical:default fails and my network services (e.g. NFS) refuse to start. # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vmxnet3s0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:1: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:2: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:3: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:4: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:5: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:6: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:7: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:8: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 vmxnet3s0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 2 inet6 ::/0 # cat /var/svc/log/network-physical\:default.log [ Aug 16 09:46:39 Enabled. ] [ Aug 16 09:46:41 Executing start method ("/lib/svc/method/net-physical"). ] [ Aug 16 09:46:41 Timeout override by svc.startd. Using infinite timeout. ] starting DHCP on primary interface vmxnet3s0 ifconfig: vmxnet3s0: DHCP is already running [ Aug 16 09:46:43 Method "start" exited with status 96. ] NFS server not running: # svcs -xv network/nfs/server svc:/network/nfs/server:default (NFS server) State: offline since August 16, 2012 09:46:40 AM UTC Reason: Service svc:/network/physical:default is not running because a method failed. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:default Reason: Service svc:/network/physical:nwam is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:nwam Reason: Service svc:/network/nfs/nlockmgr:default is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/network/nfs/nlockmgr:default See: man -M /usr/share/man -s 1M nfsd Impact: This service is not running. I'm new to the world of Solaris, so any help solving would be much appreciated. Thanks!

  Read the article

• Linux networking "jail" for a single process

  - by halp

  I need to tune up a networking app for network specific things like: make it use a DNS server different than the default one from /etc/resolv.conf make sure it does not try to connect to certain hosts/ports using tcp/udp connections I know I can get away with just modifying /etc/resolv.conf and writing some iptables rules, but going for a default DENY firewall policy for outgoing IP packets can trigger malfunctions in other services running on the server. I know I can set up a virtual machine with a whole OS and run my app there, but it seems a bit overkill. Is it possible to have a networking "jail" for a single app (think single Linux process) that could accept iptables-like rules for network traffic (think in terms of IP packets and above) allowed to and from this particular app? Maybe this is achievable through some dynamically loaded library that can deal with the networking layer, the same manner tsocks does, but more fine-grained?

  Read the article

• Redirect example.com to www.example.com VPS & Apache2

  - by Thomas Buckley

  I have a VPS and a domain name registered with the provider. When I enter www.example.com my site is displayed correctly, but entering example.com does not work. I am able to ping www.example.com. I added the following line to my apache2 default vhosts file: ServerName example.com ServerAlias www.example.com But this did not work. The VPS is a Debian5 OS. Any ideas? Note: There is no option via a provided control panel to add this, it's a basic package I purchased I know this post answers it but there are no extra comments and I'd like to know if it's the best way: way to redirect page to www using virtual host configuration in sites-available for apache2? Thanks

  Read the article

• Bluehost: 1 Minute Delays?

  - by feklee

  On Bluehost shared hosting (Apache 2.2 + FastCGI + APC), I have the problem that some requests take almost exactly one minute to respond. Yet time spent in PHP is only two seconds. To demonstrate the issue, I created a temporary test page. Sample output: When asking Bluehost support about the issue, I got the following reply: “the fastcgi process don't stay running they will only stay running for a certan period which would explain the timeouts you are seeing it traffic would spawn new ones. [...]” I understand that spawning new FastCGI processes takes some time. But almost exactly one minute? That must be some timeout. But which timeout may that be? What I want in the end: No request should take longer than five seconds to respond, even if it fails. When I asked Bluehost support to set the Apache TimeOut directive accordingly, they told me: “we do not modify the Apache Config File even on a virtual host level.”

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

• How to create a very simple external FastCGI configuration in apache?

  - by Thiado de Arruda

  I have an externally started FastCGI application that listens on socket '/tmp/foo.sock' and a directory of static files in '/srv/static'. Apache has all needed permissions on the socket and the directories. What I need : All requests starting with '/static' should be handled by apache using the contents of '/srv/static'. All other requests should be handled by the FastCGI application. Here is my current virtual host configuration: <VirtualHost *:80> ServerAdmin [email protected] ServerName www.foo.com ServerAlias foo.com Alias /static /srv/static FastCgiExternalServer /* -socket /tmp/foo.sock ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost> Even though this seems simple, its giving me quite the headache. According to http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html#FastCgiExternalServer the first parameter to 'FastCgiExternalServer' should be a 'filename' that when matched will cause apache to delegate the request to the external FastCGI app. What am I missing here?

  Read the article

• Apache 2.4.3 php-fpm mod_fast_cgi and mod_cache

  - by Anjia

  Did anybody successfully configured mod_cache in apache 2.4 with php-fpm and fastcgi? my cgi config: <IfModule mod_fastcgi.c> Alias /php5.fastcgi /var/www/fastcgi/php5.fastcgi AddHandler php-script .php FastCGIExternalServer /var/www/fastcgi/php5.fastcgi -socket /mnt/tmp/fast/php-fpm.sock -idle-timeout 1600 -pass-header Authorization Action php-script /php5.fastcgi virtual My php-fpm config is standard and I am loading mod_cache and mod_disk_cache in Apache. However the Apache does not seems to cache any content. The debug log file: Fri Sep 07 23:22:59.691333 2012] [cache:debug] [pid 35623:tid 123613201929984] mod_cache.c(161): [client 10.0.0.22:21938] AH00750: Adding CACHE_SAVE filter for /index.html [Fri Sep 07 23:22:59.691345 2012] [cache:debug] [pid 35623:tid 123613201929984] mod_cache.c(171): [client 10.0.0.22:21938] AH00751: Adding CACHE_REMOVE_URL filter for /index.html [Fri Sep 07 23:23:01.326598 2012] [cache:debug] [pid 35623:tid 123613185144576] cache_storage.c(626): [client 10.0.0.110:5414] AH00698: cache: Key for entity /index.html?(null) is `http://10.0.1.16:8080/index.html?`

  Read the article

• Where is Amazon Linux AMI Test Page EC2?

  - by fuzzybee

  I have set up my websites as directories directly under /var/www/html/ and they are working just fine (the websites are mapped to virtual hosts). So, this is mainly out of curiosity for the moment. Furthermore, being able to customise this might bring some benefits in the future e.g. branding the elastic IPs my computer use temporarily. Notes I can always create a index.html page under /var/www/html/ and modify it but that's not my goal here. I can also map the elastic IP address to a directory /var/www/html/default/ and do my stuffs there but that is not also my goal here My goal is the find the Amazon Linux AMI test page I've tried running Linux command to find it but it takes too long obviously

  Read the article

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• network issue ubuntu 8.04 in vmware esx

  - by hoberion

  ok, this is really pissing me off I have one ubuntu 8.04 instance running on vmware (esx) which decided after a reboot to stop resolving dns requests, I also cant connect to it using ssh although I can ping the server and its really that server (when I shutdown the server the ping also stops) stuff I tried: - reboot again :) - nslookup - serverip - setting networking to dhcp - offering some cute kittens to lucifer - removing the virtual nic and adding another (to get a different mac) - migrating the instance to another esx host - drinking 20 cups of espresso - stopped all services - running dnsmasq on another server and connecting to that dns - tcpdumping - disabling ip6 symptoms: cant resolve anything nslookup just says "no servers found..." although I can ping the servers traceroute to gateway doesnt work (even with traceroute -4 -n gatewayip) collegues laughing at me any thoughts

  Read the article

• Virtualhost pulling from the same site??

  - by Matt

  I have my httpd.conf on fedora 8 that I am setting the virtual host file. Here is what I have: DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> then below I am trying to setup a vhost to have multiple sites on the server: NameVirtualHost *:80 <VirtualHost *:80> ServerName kadence.tv DocumentRoot /var/www/html/ </VirtualHost> <VirtualHost *:80> ServerName nacc.biz DocumentRoot /var/www/html/nacc/ </VirtualHost> also in the /var/www/html/ directory I have the index.php file for the kadence site...when I do to either site I get the index for the kadence site...any ideas what I am doing wrong EDIT the full contents of my httpd configuration file are here.

  Read the article

• KVM online disk resize?

  - by Eil

  We're evaluting KVM for Linux virtualization on a few projects. All is going well so far. But one of our requirements is the ability to add disk space to a running guest without rebooting or taking it offline. Is this possible with KVM? The only thing I've found so far (but have not tested yet) is the ability to hotplug disks into the machine. If I go this route, then I could always add the new disk to an LVM volume group on the guest and then extend the chosen logical volume. The biggest downside to this approach is that over time we might end up with guests having variable numbers of virtual disks. The "real" disk space would be provided to the host over a SAN, so we can always add more space to the host whenever.

  Read the article

• Static route in conflict with a default route

  - by Ossan Sokiv

  Hi guys, I have a default route configured. 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.1 I'd like to add a static route to pass traffic destined for 192.168.1.51 via a load balancer's redundant virtual interface at 192.168.1.2. ip route add 192.168.1.51 mask 255.255.255.255 via 192.168.1.2 When I try to add the static route I get this error. Error: either "to" is duplicate or "default" is garbage." It doesn't want to add the static route because it's in conflict with the default route. Is there a way around this? Regards Ossan

  Read the article

• Wired and Wireless USB Network Adapter

  - by Evan M.

  Does anyone know if there are any USB network adapters out there that have both wired and wireless networking capability? Far-fetched, I know, but thought I'd ask. Background: Some of our users have locked down laptops that we also include unlocked virtual machines running on VMware Player. Sometimes the users have a need for network connectivity with their VMs where NAT and bridged networking from the host won't work. To supplement this, we want to supply them with adapters that they can use VMware USB pass through capabilities to provide appropriate connectivity. They will need both wired and wireless capability. Rather than carrying around 2 adapters, was hoping we could get a combination unit so that we can reduce it to 1. Thanks

  Read the article

• Core Audio sound driver has an error

  - by Raj More

  I have been using Virtual DJ on my machine. The setup is where I want audio to play over the headphones and use a USB sound card to play audio into my headphones so I can listen to music before I play it for everybody. However, the last time I tried, I got an error message saying "Error in the sound driver of Core Audio. Your sound card is probably not connected, or the settings are incorrect". If I use the headphone by themselves, the USB sound card by itself, or my speakers by themselves, they all work individually. How do I go about figuring out what's wrong here?

  Read the article

• Add linux user with restricted access

  - by Dominik Str

  I need to create a user on linux with access rights only to one folder. Background: I have installed git on my virtual server (Debian). I also created a user for the repository. There is a lot of private data on the server. But all folders have read-access for others, because it's needed for the applications which run on the server. So the git-user can see all the data. I would like to restrict the git user only to the folder where the repository is installed. I also tried ACL, but it didn't work. Is there a better way to do this? Thanks in advance!

  Read the article

• mkisofs - Floppy Image to Disk Image

  - by CommunistPancake

  I'm trying to compile MikeOS on windows. I've successfully (I think) created a floppy (.flp) image of the operating system. I want to convert it to a disk image (.iso) so I can run it in virtual box. I've tried mkisofs -quiet -V 'MIKEOS' -input-charset iso8859-1 -o disk_images/mikeos.iso -b mikeos.flp disk_images/ Which is the command in the Linux build script. It does create an ISO image, but when I try to run in in VirtualBox, I get a black screen. What am I doing wrong? Here's my build script.

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

  - by Filip Ekberg

  I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

  Read the article

• ESXi 4.1 CentOS 6.X eth0 unnavailable

  - by L.K.

  I don't usually ask for help so directly, usually google have all i need but this time i'm seriously lost. Hope you can help me .s The thing is, i have a server with Vmware ESXi 4.1 and 5 already running and configured virtual servers, but whenever i try to make a new one on CentOS 6.X it leaves me without eth0 to be activated in any way. When installing CentOS, in the screen of localhost.localdomain i try by the button in the left down corner of the screen to make eth0 connect automatically but it tells me a NetworkManager Error: cannot start eth0. So...in command line once the CentOS is already installed, i have configured ifcfg-eth0 and manually tried to take up the eth0 but when i restart network service "Bringing up eth0: Failed" and sometimes even "shutting down eth0: Failed" Thanks in advance

  Read the article

• Citrix XenServer iSCSI shared disk?

  - by chsguy

  I am running Citrix XenServer Essentials 5.5, with VMs stored on an EqualLogic iSCSI shelf, using XenServer's StorageLink. I would like to create a "virtual disk" that can be attached to multiple VMs. This would be used for a cluster file system like OCFS2 or GFS. This doesn't seem possible using the XenCenter GUI and I can't find anything online about how to do it. I realize I could simply expose the iSCSI network to the VM and have the VM initiate its own iSCSI, but that creates a lot of security challenges. This was pretty easy to do on Oracle VM Server, which is Xen based, so I know it's not a limitation of Xen itself. Maybe there is an "xe-" command for this? Thanks for any suggestions you can provide.

  Read the article

• Ethernet interface number changed, and old one does not exist, but does not leave IP address

  - by Sagar

  I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

  Read the article

• How to monitor CPU usage and performance on a Hyper-V server with several VM's

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >