Search Results

Search found 28439 results on 1138 pages for '10'.

Page 266/1138 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• Copying large files from USB devices to the internal hard drive fails on Mac OS

  - by John M. P. Knox

  I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

  Read the article

• Can OpenVPN invoke DHCP Client?

  - by Ency

  I have got working VPN connection through openvpn, but I would like to use also my DHCP server and not openvpn's push feature. Currently everything works fine, but I have to manually start dhcp client, eg. dhclient tap0 and I get IP and other important stuff from my DHCP, is there any directive which start DHCP Client when connection is established? There is my client's config: remote there.is.server.com float dev tap tls-client #pull port 1194 proto tcp-client persist-tun dev tap0 #ifconfig 192.168.69.201 255.255.255.0 #route-up "dhclient tap0" #dhcp-renew ifconfig 0.0.0.0 255.255.255.0 ifconfig-noexec ifconfig-nowarn ca /etc/openvpn/ca.crt cert /etc/openvpn/encyNtb_openvpn_client.crt key /etc/openvpn/encyNtb_openvpn_client.key dh /etc/openvpn/dh-openvpn.dh ping 10 ping-restart 120 comp-lzo verb 5 log-append /var/log/openvpn.log Here comes server's config: mode server tls-server dev tap0 local servers.ip.here port 1194 proto tcp-server server-bridge # Allow comunication between clients client-to-client # Allowing duplicate users per one certificate duplicate-cn # CA Certificate, VPN Server Certificate, key, DH and Revocation list ca /etc/ssl/CA/certs/ca.crt cert /etc/ssl/CA/certs/openvpn_server.crt key /etc/ssl/CA/private/openvpn_server.key dh /etc/ssl/CA/dh/dh-openvpn.dh crl-verify /etc/ssl/CA/crl.pem # When no response is recieved within 120seconds, client is disconected keepalive 10 60 persist-tun persist-key user openvpn group openvpn # Log and Connected clients file log-append /var/log/openvpn verb 3 status /var/run/openvpn/vpn.status 10 # Compression comp-lzo #Push data to client push "route-gateway 192.168.69.1" push "redirect-gateway def1"

  Read the article

• Speeding up Outlook Express on Windows XP over satellite

  - by John

  My brother is in the field with Doctors Without Borders. I'm posting this question on his behalf. We use outlook express (on a pc running windows XP) and a 9600 baud dial up satellite phone modem to get our email direct from the server in Paris. As this is a very expensive way to communicate (our satellite bill is $50K a year, no joke), it seems like trying to streamline is a good idea. Here's the question- when we connect, the sequence goes: Send outbox mails. This goes pretty quickly, probably 10-15 seconds for each email, up to maybe a couple minutes for an email of 150k or so). The status bar moves pretty quickly, according to the emails sent. The system then says "Checking for new messages on (our account name), and "Receiving list of messages from server". This takes a long time. Like 10-15 minutes. The status bar crawls along. Then it receives the messages. "Receiving messages from server". Again, each message takes 10-15 seconds, and this part moves along reasonably fast. I'm curious as to what is going on in the second part. It takes forever, and doesn't seem to be part of the sending or receiving messages themselves. Is there a way to speed up the process by changing a preference with communicating with the server or something? Does anyone have any advice for him speeding up what Outlooks Express is doing? Obviously his software is ancient and adding more software is not realistic based on the connection speed. Thanks!

  Read the article

• Server 2008 NAT Internet Not Working

  - by Jack

  I'm trying to set up Routing and Remote Access on Windows Server 2008 R2, I have a network connection that I want to share the internet from to another private network. The server has two NICs which are configured as follows: External NIC (Dynamically assigned by ISP) IP:10.175.4.150 Subnet:255.255.192.0 Gateway:10.175.0.1 DNS:10.175.0.1 Internal NIC IP:172.16.254.1 Subnet:255.255.255.0 Gateway:None DNS:None I have set the external NIC to be the public interface and enabled NAT on it in the RRAS MMC and set the internal NIC to be a private interface. I have also set up the DNS forwarding or whatever it is in the NAT section. From a client (IP:172.16.254.2) I can ping the server and access files on it, when I try to browse the web with the default gateway set to the internal NIC ip I end up getting a 404 page which is returned from the ISPs default gateway. I'm guessing it's something to do with the double NAT possibly. Trying to ping the ISPs default gateway from a private network client just times out as does accessing it directly. I've disabled and reconfigured RRAS multiple times and that doesn't seem to have made a difference, so can anyone tell me what I'm doing wrong? Thanks.

  Read the article

• Apache httpd LDAP integration

  - by David W.

  I am configuring a CollabNet Subversion integration. I have the following collabnet_subversion.conf file: <Location /svn> DAV svn SVNParentPath /mnt/svn/new_repos SVNListParentPath on AuthName "VegiBanc Source Repository" AuthType basic AuthzLDAPAuthoritative off AuthBasicProvider ldap AuthLDAPURL ldap://ldap.vegibanc.com/dc=vegibanc,dc=com?sAMAccountName" NONE AuthLDAPBindDN "CN=SVN-Admin,OU=Service Accounts,OU=VegiBanc Users,OU=vegibanc,DC=vegibanc,DC=com" AuthLDAPBindPassword "swordfish" </Location> This works great. Any user in our Active Directory can access our Subversion repository. Now, I want to limit this to only people in the Active Directory group Development: <Location /svn> DAV svn SVNParentPath /mnt/svn/new_repos SVNListParentPath on AuthName "VegiBanc Source Repository" AuthType basic AuthzLDAPAuthoritative off AuthBasicProvider ldap AuthLDAPURL ldap://ldap.vegibanc.com/dc=vegibanc,dc=com?sAMAccountName" NONE AuthLDAPBindDN "CN=SVN-Admin,OU=Service Accounts,OU=VegiBanc Users,OU=VegiBanc,DC=vegibanc,DC=com" AuthLDAPBindPassword "swordfish" Require ldap-group CN=Development OU=Security Groups OU=VegiBanc, dc=vegibanc, dc=com </Location> I added Require ldap-group, but now no one can log in. I have LogLevel set to debug, but all I get is this in my error_log (Single line broken up for easier reading): [Thu Oct 11 13:09:28 2012] [info] [client 10.55.9.45] [6752] vauth_ldap authenticate: user dweintraub authentication failed; URI /svn/ [ldap_search_ext_s() for user failed][Bad search filter] And, I get this in my access_log: 10.55.9.45 - - [11/Oct/2012:13:09:27 -0500] "GET /svn/ HTTP/1.1" 401 401 10.55.9.45 - dweintraub [11/Oct/2012:13:09:28 -0500] "GET /svn/ HTTP/1.1" 500 535 Yes, I am in that group. (Or, at least how can I confirm that just to make sure that's not the issue. I have the SysinternalsSuite ADExplorer. It's where I'm getting all of my info.)

  Read the article

• Why my 2nd ip from traceroute is not answering the ping anymore?

  - by Pedro77

  My Internet is really laggy today, I did a tracerout and I realize that I'm having no answer from an ip at the beginning of the traceroute. see: Tracing route to 12.129.202.154 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.1 2 * * * Request timed out. 3 8 ms 8 ms 8 ms bd044008.virtua.com.br [189.4.64.8] 4 9 ms 8 ms 8 ms bd044009.virtua.com.br [189.4.64.9] 5 26 ms 26 ms 24 ms embratel-T0-1-5-0-tacc01.cas.embratel.net.br [200.174.243.21] 6 360 ms 15 ms 12 ms ebt-T0-15-0-12-tcore01.ctamc.embratel.net.br [200.244.140.218] 7 330 ms 349 ms 261 ms ebt-Bundle-POS11942-intl04.mianap.embratel.net.br [200.230.220.10] 8 139 ms 141 ms 139 ms sl-st30-mia-.sprintlink.net [144.223.64.221] Connection diagram: PC - Router configured as access point - Router (192.168.0.1) - Cable modem (192.168.100.1). Well, I think it is odd that the 2nd ip is not returning the ping. I looked some old tracerout logs to see what was the 2nd ip. The ip was: 10.19.0.1 So, what this 2nd ip stand for? How can I find why it is not answering the ping? I don't understand it, if does not answer the ping, how can the packets continue (yeah newbie question)? edit: well, because the hope 3 have a ping of 8 ms the hop 2 request time out should really not be a problem. But it is still odd that the 2nd hop stopped to answer ping request. So my doubts are: 1. Were the ip 10.19.0.1 is from? 2. Why it stopped to answer ping requests? 3. How can hop 7 be smaller than 6 and 8 smaller than 7 and 6!?? Shouldn't the pings be higher for each hop? Like: hop 3 time should be the sum of the hops before it plus its own time (hop 3 = 1+2+3) ??

  Read the article

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• openvpn& iptables -- portforwarding and gateway

  - by Smith.Lai

  The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

  Read the article

• Every minute incoming, rejected connections to SMTP

  - by joltmode

  I have a feeling my server is being lazily DDoS'ed, though, I have never experienced it before, so, I may be wrong. Every minute, my journal logs the following 3 entries: Nov 05 21:10:47 <host> postfix/smtpd[11220]: connect from webmail.onvoy.com[199.199.18.10] Nov 05 21:10:47 <host> postfix/smtpd[11220]: NOQUEUE: reject: RCPT from webmail.onvoy.com[199.199.18.10]: 454 4.7.1 <tg@<DOMAIN>>: Relay access denied; from=<> to=<tg@<DOMAIN>> proto=ESMTP helo=<webmail.onvoy.com> Nov 05 21:10:47 <host> postfix/smtpd[11220]: disconnect from webmail.onvoy.com[199.199.18.10] Where <host> and <DOMAIN> are hidden. <DOMAIN>, though, is a domain registered with my NS that resolves to my box. How do I get rid of the messages and the related connections?

  Read the article

• apache with php fastcgi keeps going down

  - by Josh Nankin

  I have an apache2 server configured with MPM worker and php fast cgi. Lately the apache logs have been telling me that MaxClients is being reached frequently, even though it's already pretty high. My server is now constantly going down, and I see a bunch of lines like this in the log: [Sun Mar 06 04:25:40 2011] [error] [client 50.16.83.115] FastCGI: comm with (dynamic) server "/var/local/fcgi/php-cgi-wrapper.fcgi" aborted: (first read) idle timeout (20 sec) [Sun Mar 06 04:25:40 2011] [error] [client 50.16.83.115] FastCGI: incomplete headers (0 bytes) received from server "/var/local/fcgi/php-cgi-wrapper.fcgi" I can see that my php-cgi processes are pretty large (about 70mb on average). Here's my apache configuration for MPM worker: KeepAlive ON KeepAliveTimeout 2 <IfModule mpm_worker_module> StartServers 5 MinSpareThreads 10 MaxSpareThreads 10 ThreadLimit 64 ThreadsPerChild 10 MaxClients 20 MaxRequestsPerChild 2000 </IfModule> Heres my fastcgi apache configuration: <IfModule mod_fastcgi.c> # One shared PHP-managed fastcgi for all sites Alias /fcgi /var/local/fcgi # IMPORTANT: without this we get more than one instance # of our wrapper, which itself spawns 20 PHP processes, so # that would be Bad (tm) FastCgiConfig -idle-timeout 20 -maxClassProcesses 1 <Directory /var/local/fcgi> # Use the + so we don't clobber other options that # may be needed. You might want FollowSymLinks here Options +ExecCGI </Directory> AddType application/x-httpd-php5 .php AddHandler fastcgi-script .fcgi Action application/x-httpd-php5 /fcgi/php-cgi-wrapper.fcgi </IfModule> Here's my fastcgi wrapper: #!/bin/sh PHPRC="/etc/php5/apache2" export PHPRC PHP_FCGI_CHILDREN=8 export PHP_FCGI_CHILDREN exec /usr/bin/php-cgi Any help would be very very much appreciated!

  Read the article

• VMware Server Host-Only Network Routing

  - by Chris

  I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

  Read the article

• Format & Fresh Install Mac OS X Snow Leopard on Mac mini.

  - by sagar

  Hello Every one. I have purchased a DVD of Snow Leopard (Mac OS X 10.6.2) I purchased a Mac mini with Leopard (Mac OS X 10.5.7) I tried to install Mac OS X 10.6.2 Everything went perfectly. System was installed successfully. But the problem that I faced is as follows. System was installed but my older data remained as it is. (means installation didn't format every thing - means installation was done on upgrade basis.) Now, my system works with very low speed. Previous performance of Mac mini was double as compare to current upgrade version. Now - my question are as follows. Does an upgrade installation causes the performance issues in Mac OS X? Or is Snow Leopard too demanding for the Mac mini? ( 2 Ghz Intel Core 2 Duo, 1GB RAM - is this configuration OK for Snow Leopard? ) Does a fresh install work better than an upgrade?

  Read the article

• SCM8014 to FVS338

  - by Jack

  I have a SMC8014 Router/Modem that Comcast provided me with their business class service. It was not filtering malicious traffic as aggressively as I had hoped, so I purchased a NetGear ProSafe FVS338, and put this behind the SMC8014, and all my machines behind that. After some brief configuration, all machines can see out to the internet. I also have a single web server, and I have not been able to configure things so that incoming requests can reach it. This is where I need help! I would like to have the FVS339 do NAT, so that I can assign a 192.168 address to my webserver. I've tried everything I know of, and I can't get things going. I set the SMC8014 to have a LAN facing IP of 10.0.0.1, and I assigned the FVS339 a WAN facing IP of 10.0.0.2. I would like to be able to tell the SMC8014 to just forward all traffic to 10.0.0.2, but I haven't had any success. In my (unfortunately limited) understanding, what I probably want here is a static route, but I don't know how to cofigure one, or if this is really what I want. The SMC8014 wants a Destination IP, a Subnet Mask and a Gateway IP. Any help would be appreciated.

  Read the article

• Cisco Pix 515 ip addressing

  - by Rickard

  I have just gotten my hands on a Cisco Pix 515 (not 515E) with 3 interfaces, and are just about to start some labs. In my lab, I am using a real life scenario from an actual setup at work. As I have no access to the device at work, I am simply trying to replicate the scenario by trial and error. At work, we are given two IP addresses from the provider, which is 1-to-1 nated addresses. The addresses we are allowed to use are: 10.131.35.4-5/29 Now, we have 3 servers on a DMZ, 192.168.2.2-4/24 and 17 client computers on 192.168.1.100-117/24 aswell as some static addressed devices on 192.168.1.8-18/27 My question is, how would I best set up so that the machines on the DMZ get's translated to 10.131.35.4 and the machines on 192.168.1.* will be translated to 10.131.35.5 I don't expect or want anyone to give me a fully functional config, I may learn from it, but I'd prefer to just have some advices or maybe a guide on how to set it up. I hope someone can shed some light over my situation, have been looking through google but I guess I don't the searchwords I'm using isn't too good as I can't find any good clues. THank you very much! PS. Maybe I should add, I am not unfamiliar with the Cisco CLI, as I prefer using that before any gui's. So not really looking for any solutions for the ASDM. DS.

  Read the article

• Dante (SOCKS server) not working

  - by gregmac

  I'm trying to set up a SOCKS proxy using dante for testing purposes. However, I can't even get it to work with a web browser, after looking at several tutorials on how to do that. I've tried in both IE and Firefox, in both cases, using "Manual proxy configuration", leave everything blank except for SOCKS host, and then put in the IP of my proxy and the port number (1080). I just get "Server not found" / "Problems loading this page" and don't see anything in danted, even running in debug mode. If I do a "telnet 10.0.0.40 1080" I do see the connection open in danted debug output, so I know that much is working. Here's my config: logoutput: stdout /var/log/danted/danted.log internal: eth0 port = 1080 external: eth0 method: username none #rfc931 user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody connecttimeout: 30 # on a lan, this should be enough if method is "none". client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client pass { from: 127.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } block { from: 0.0.0.0/0 to: 127.0.0.0/8 log: connect error } pass { from: 10.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } pass { from: 127.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } I'm sure I'm probably missing something simple, but I'm lost. I haven't even thought about SOCKS since the late 90's.

  Read the article

• Why am I getting blank error messages in my Apache error log?

  - by Jason Lamoreux

  I am running Apache 2.2 on 64bit Windows Server 2008 Std edition with ActivePerl 5.8.9. My error log is filling up with blank error messages like these: [Wed Mar 31 14:08:31 2010] [error] [client 10.6.1.164] [Wed Mar 31 14:10:32 2010] [error] [client 10.6.1.89] [Wed Mar 31 14:13:20 2010] [error] [client 10.6.1.131] By looking in the access log I can tell that it occurs when our client machines issue a GET to a very simple Perl script. #!perl.exe use strict; no warnings; $|=1; use CGI::Carp('fatalsToBrowser'); use CGI qw(:standard); print header; my $CRLF = "\r\n<br>"; my $Port = '10116'; print "Success!${CRLF}PollInterval=5${CRLF}LMProMode${CRLF}Version=7${CRLF}ConnectionPort=$Port"; exit; The weird thing is that it does not look like this error message is inserted every time a GET to this Perl script occurs. What could cause this error message to appear in the Apache error log?

  Read the article

• Haproxy not properly passing on X-Forwarded-For header

  - by JesseP

  I have backend web servers that receive requests by way of haproxy-nginx-fastcgi. The web app used to see multiple ip's coming through in the X-Forwarded-For header, chained together with commas (most original IP on the left). At some point in the recent past (just noticed, so not sure what caused it) something changed, and now I'm only seeing a single IP passed in the header to my web application. I've tried with haproxy 1.4.21 and 1.4.22 (recent upgrade) with the same behavior. Haproxy has the forwardfor header set: option forwardfor Nginx fastcgi_params config defines this header to be passed to the app: fastcgi_param HTTP_X_FORWARDED_FOR $http_x_forwarded_for; Anyone have any ideas on what might be going wrong here? EDIT: I just started logging the $http_x_forwarded_for variable in nginx logs, and nginx is only ever seeing a single IP, which shouldn't ever be the case, as we should always see our haproxy ip added in there, right? So, issue must either be in nginx handling of the variable coming in, or haproxy not building it properly. I'll keep digging... EDIT #2: I enabled request and response header logging in HAProxy, and it is not spitting anything out for X-Forwarded-For, which seems very odd: Oct 10 10:49:01 newark-lb1 haproxy[19989]: 66.87.95.74:47497 [10/Oct/2012:10:49:01.467] http service/newark2 0/0/0/16/40 301 574 - - ---- 4/4/3/0/0 0/0 {} {} "GET /2zi HTTP/1.1" O Here are the options i set for this in my frontend: mode http option httplog capture request header X-Forwarded-For len 25 capture response header X-Forwarded-For len 25 option httpclose option forwardfor EDIT #3: It really seems like haproxy is munging the header and just passing on a single one to the backend. This is fairly impacting to our production service, so if anyone has an ideas it would be greatly appreciated. I'm stumped... :(

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

• Apache2 slow serving static while healthy

  - by user45339

  My Apache status looks like; 201 requests/sec - 98.8 kB/second - 504 B/request 85 requests currently being processed, 345 idle workers _____CCW_C_____C__C__C_R____C_WC_________C__C____CW__C__CCC_____ __C____W______C___C___CW__C_C______C__W_C__C_____CCC____C______R CC_C_______C___C____C______________C______C__C________________C_ ___________________C______________________C_______C___C_____C___ CC____C__C___R_____C_C_CC__________C___C___________R____C_C_C___ ______C______W_W__W___C____________________C__WCC__R__R_C_______ R__RC________________________C___R____W__C____.................. .................................................... Server load is average 2 on a 4 core machine. IO utilization is 10-15% and doesn't have many jumps over 70%. Machine has almost 4 gb free and uses 0 swap. The site on the machine is a PHP site. All PHP code is optimized and fast mostly when it gets accessed, however sometimes requests get stuck. Stuck meaning; no response for at least 10 sec. We debugged the PHP code, but it is quite optimal and fast. We spend a lot of time on it until we decided to test the requesting of: <html><body>test</body></html> test.html page. This static resource also gets 'stuck' in the same manner the php pages get 'stuck'. How is the possible given the health of the system? I tested the network, but, when the PHP shows 'slowness' in the site monitoring, the html test files also take (far longer) than 10 sec to load using; time lynx -dump http://127.0.0.1/test.html We are kind of desperate to solve this problem, but we cannot seem to tackle it.

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• How do I compile DarWINE in PowerPC Mac OS X 10.4.11...?

  - by Craig W. Davis

  So far I've tried using MacPorts which gives me this error: /Error: Cannot install wine for the arch(s) 'powerpc' because Error: its dependency pkgconfig is only installed for the archs 'i386 ppc'. Error: Unable to execute port: architecture mismatch To report a bug, etc... (I'm not allowed to post two links due to being a new poster...)./ I've also tried using the build script I found in the DarWINE 0.9.12 SDK download that I found on the DarWINE SourceForge.net Project Page... I've also tried the build script that I found at http://code.google.com/p/osxwinebuilder/#Building_Wine_via_the_script... None of these attempts to build DarWINE have actually worked. Whenever I build using the DarWINE build script I run it as follows: /1. I decompress the WINE tarball into ~/Downloads/WINE 2. I cd into ~/Downloads/DarWINE. 3. I run ./winemaker ~/Downloads/WINE/wine-1.2.2 or ./winemaker ~/Downloads/WINE/wine-1.2-rc2 (the reason for trying WINE 1.2-rc2 is that some people managed to get it to build on PowerPC Macs running 10.5.8...)./ I made sure to install Xcode Tools 2.5 & all the SDKs too... The net result is either a syntax type error resulting from trying to run the checked out Google Code DarWINE build script or a bunch of make errors when trying to run the official DarWINE build script that I forcefully extracted from the DarWINE 0.9.12 SDK .dmg file by using Pacifist. I trying to build DarWINE on mid-April 2006 1.42 GHz eMac with DL SuperDrive with Bluetooth 2.0+EDR with 2 GBs of RAM running 10.4.11 as I mentioned earlier... (it came with 10.4.4 on the Mac's Restore DVD-ROM that I ordered from 1-800-SOS-APPL & coconutIdentityCard told me it was made on April 12th 2006 & I know that's right because when I reinstalled Mac OS X 10.4.4 it displayed that it was registered/previously owned by a Hawaiian school...): /make[1]: winegcc: Command not found make[1]: * [main.o] Error 127 make: * [dlls/acledit] Error 2./

  Read the article

• pptpd-logwtmp.so config wrong ip address

  - by rgc

  i have setup a pptp vpn on ubuntu 10.04, and i config local ip address , remote ip address as following: local IP address 10.0.30.100 remote IP address 192.168.13.100 after i use windows to connect to vpn server in windows , i only could send packets, can not receive any packets. i also check the pptp log in ubuntu server, and find this strange thing rcvd [IPCP ConfAck id=0x1 <compress VJ 0f 01> <addr 10.0.30.100>] rcvd [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 192.168.13.100> <ms-dns1 202.119.32.6> <ms-dns2 202.119.32.12>] sent [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 192.168.13.100> <ms-dns1 202.119.32.6> <ms-dns2 202.119.32.12>] Cannot determine ethernet address for proxy ARP local IP address 10.0.30.100 remote IP address 192.168.13.100 pptpd-logwtmp.so ip-up ppp0 **172.25.146.174** i did not set 172.25.146.174, it should be 192.168.13.100, can anyone tell me what should i do to fix this problem?

  Read the article

• VPN - local and remote networks IP collision

  - by Guido García

  I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

  Read the article

• Specific DNS sometimes resolves to wildcard, incorrectly

  - by Mojo

  I have an intermittent problem, and I'm not sure where to start trying to troubleshoot it. In our dev environment, we have two visible IP addresses on load balancers, one to the front-end, and one to a number of back-end service machines. The front-end is configured to take a wildcard DNS name to support generic "portals." dev.example.com A 10.1.1.1 *.dev.example.com CNAME dev.example.com The back-end servers are all specific names within the same space: core.dev.example.com A 10.1.1.2 cms.dev.example.com CNAME core.dev.example.com search.dev.example.com CNAME core.dev.example.com Here's the problem. Periodically a developer or a program trying to reach, say, cms.dev.example.com will get a result that points to the front-end, instead of the back-end load balancer: cms.dev.example.com is an alias to core.dev.example.com core.dev.example.com is an alias to dev.example.com (WRONG!) dev.example.com 10.1.1.1 The developers are all on Mac OS X machines, though I've seen the problem occur on an Ubuntu machine as well, using a local cloud host DNS resolver. Sometimes the developer is using a VPN, which directs the DNS to its own resolver, and sometimes he's on the local net using a DNS resolver assigned by the NAT router. Sometimes clearing the Mac OS X DNS cache, logging into the VPN, then logging out of the VPN, will make the problem go away. The origin authoritative server is on zerigo, and a dig directly to their name servers always seems to give the correct answer. The published DNS cache time for these records is 15 minutes, but the problem has been intermittent for about a week. Any troubleshooting suggestions?

  Read the article

• Can Xen be configured to dedicate only one port of a dual-port NIC to a domU?

  - by jamieb

  I'm using CentOS 5.4 on my dom0 with a stock Xen kernel. I'm attempting to use the pciback module to hide some of the Ethernet ports from the host and reserve them for a domU I intend to use for a firewall (process described here). However, when I launch the domU, I get the following error message: Using config file "/etc/xen/firewall". Error: pci: improper device assignment specified: pci: 0000:01:04.0 must be co-assigned to the same guest with 0000:01:06.0, but it is not owned by pciback. lspci gives me the following output: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) From the sound of the error message, it seems like I also need to dedicate eth0 (PCI ID 01:04.0) to the domU. Am I correct? If not, what am I doing wrong? Thanks!

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >