Search Results

Search found 15780 results on 632 pages for 'pass board elections 2011'.

Page 266/632 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

  • Installing OEM Windows Server 2008 under KVM

    - by rancidfishbreath
    Issue I have an HP server that came with an OEM copy of Windows Server 2008. I have installed CentOS 5.4 on the hardware and am trying to install Windows Server 2008 as a KVM guest. When I attempt to install Windows Server 2008 it complains that I am trying to install on unsupported hardware. This issue is caused because the hardware SMBIOS information is not being passed to the KVM guest. Background Before I go any further I want to state that what I am trying to do is within the license. HP offers a supported solution for VMWare but does not have an official solution for KVM. After much research the platform I am going to use is CentOS and KVM so please do not suggest other platforms. I emailed the KVM developers mailing list and was told that this is possible and was given the advice that: "You can dump SLIC table of your host bios and provide it to guest bios using -acpitable parameter." I used dmidecode and got the parameters that need to be passed, but I do not know where to pass the parameters into. Update Looks like CentOS 5.4 uses virt-install instead of qemu. Qemu is in the package manager and I was able to install it after uninstalling qemu-img (they conflict and qemu contains the packages in qemu-img). So now I know how to pass the acpitable parameters, but I am having trouble mapping what came out of dmidecode into -acpitable.

    Read the article

  • SFTP only works occasionally

    - by 82din
    I suddenly get this error using SFTP: Status: Connecting to example.com... Response: fzSftp started Command: open "[email protected]" 22 Command: Pass: ********* Status: Connected to example.com Status: Retrieving directory listing... Command: pwd Response: Current directory is: "/root" Command: ls Status: Listing directory /root Error: Connection timed out Error: Failed to retrieve directory listing I tried using FileZila, Cyberduck, Shell (Terminal), same result. However, it worked fine today (just a few seconds) in Passive mode. I guess something changed in my network, so I have tried both: Active and Passive mode: Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.6.0.2 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from http://checkip.dyndns.org:8245/ Checking for correct external IP address IP <external IP> big-bf-ccc-f Response: 200 OK PREP 49565 Response: 200 Using port 49565, data token 380352881 PORT 186,15,222,5,193,157 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed Because I'm working behind a router, I get my external IP from http://checkip.dyndns.org:8245/ I also tested different range of ports.

    Read the article

  • NATing IPv4 while routing IPv6

    - by Hugo
    I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

    Read the article

  • Configure nginx for multiple node.js apps with own domains

    - by udo
    I have a node webapp up and running with my nginx on debian squeeze. Now I want to add another one with an own domain but when I do so, only the first app is served and even if I go to the second domain I simply get redirected to the first webapp. Hope you see what I did wrong here: example1.conf: upstream example1.com { server 127.0.0.1:3000; } server { listen 80; server_name www.example1.com; rewrite ^/(.*) http://example1.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example1.com; access_log /var/log/nginx/example1.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example1.com; proxy_redirect off; } } example2.conf: upstream example2.com { server 127.0.0.1:1111; } server { listen 80; server_name www.example2.com; rewrite ^/(.*) http://example2.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example2.com; access_log /var/log/nginx/example2.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example2.com; proxy_redirect off; } } curl simply does this: zazzl:Desktop udo$ curl -I http://example2.com/ HTTP/1.1 301 Moved Permanently Server: nginx/1.2.2 Date: Sat, 04 Aug 2012 13:46:30 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: http://example1.com/ Thanks :)

    Read the article

  • Copying email with qmail and Plesk

    - by Greg
    I need to keep a copy of all outgoing and incoming email (for a single domain if possible) using qmail or Plesk. I can't recompile qmail, so qmailtap is out of the question, as is setting QUEUE_EXTRA in extra.h. I'm pretty sure it should be possible with Plesk's mailmng utility, aka Mail Handlers but I'm having trouble getting them to work. I've registered 2 hooks: incoming hook ./mailmng --add-handler --handler-name=incoming --recipient-domain=example.com --executable=/xxx/incoming.sh --context=/xxx/incoming/ --hook=before-local incoming.sh #!/bin/bash # The email is passed on stdin - grab it to a variable e=`cat -` # $1 = context (/xxx/incoming) # $3 = recipient ([email protected]) # Create /xxx/incoming/[email protected] mkdir -p $1$3 # Save the email to /xxx/incoming/[email protected]/0123456789.txt echo "$e" > $1$3/`date +%s%N`.txt # Echo PASS to stderr echo 'PASS' >&2 # Echo the email to stdout echo "$e" outgoing hook # ./mailmng --add-handler --handler-name=outgoing --sender-domain=holidaysplease.com --executable=/xxx/outgoing.sh --context=/xxx/outgoing/ --hook=before-remote The outgoing.sh file is the same as incoming.sh, except replace $3 (recipient) with $2 (sender). The incoming hook does work, but saves 2 copies of each email - one before and one after SpamAssassin has run. The outgoing hook doesn't seem to get called at all. So finally, my questions are: How can I make the incoming hook save only a single copy (preferably after SpamAssassin has run)? How can I get the outgoing hook to work?

    Read the article

  • htaccess rewrite rules in Nginx: setting the rewrite path

    - by ct2k7
    I have a htaccess file I'm trying to convert into an nignx config file. Here's my htaccess file. RewriteEngine on RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule !\.(jpg|css|js|gif|png)$ public/ [L] RewriteRule !\.(jpg|css|js|gif|png)$ public/index.php?url=$1 And the rules I have in my nginx config file: location / { if ($request_uri !~ "-f"){ rewrite !\.(jpg|css|js|gif|png)$ public/ break; } rewrite !\.(jpg|css|js|gif|png)$ public/index.php?url=$1; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { # Move to the @missing part when the file doesn't exist try_files $uri @missing; # Fix for server variables that behave differently under nginx/$ fastcgi_split_path_info ^(.+\.php)(/.+)$; # Include the standard fastcgi_params file included with ngingx include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_index index.php; # Pass to upstream PHP-FPM; This must match whater you name you$ #fastcgi_pass phpfpm; fastcgi_pass 127.0.0.1:9000; } location @missing { rewrite ^(.*)$ public/index.php?url=$1 break; } However, when I hit /, I get a 403 Forbidden, but I can get to /public/index.php, thus the rewrite isn't working. Any ideas on what I'm doing wrong?

    Read the article

  • java.lang.OutOfMemoryError: unable to create new native thread

    - by Brad
    I consistently get this exception when trying to run my Junit tests on my mac: java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:658) at java.util.concurrent.ThreadPoolExecutor.addIfUnderMaximumPoolSize(ThreadPoolExecutor.java:727) at java.util.concurrent.ThreadPoolExecutor.execute(ThreadPoolExecutor.java:657) at java.util.concurrent.AbstractExecutorService.submit(AbstractExecutorService.java:92) at com.google.appengine.tools.development.ApiProxyLocalImpl$PrivilegedApiAction.run(ApiProxyLocalImpl.java:197) at com.google.appengine.tools.development.ApiProxyLocalImpl$PrivilegedApiAction.run(ApiProxyLocalImpl.java:184) at java.security.AccessController.doPrivileged(Native Method) at com.google.appengine.tools.development.ApiProxyLocalImpl.doAsyncCall(ApiProxyLocalImpl.java:172) at com.google.appengine.tools.development.ApiProxyLocalImpl.makeAsyncCall(ApiProxyLocalImpl.java:138) The same set of unit tests pass perfectly fine on ubuntu and windows. Some information about my system resources on the mac: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 266 virtual memory (kbytes, -v) unlimited $ java -version java version "1.6.0_24" Java(TM) SE Runtime Environment (build 1.6.0_24-b07-334-10M3326) Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02-334, mixed mode) The reason I dont think this is an application issue is because the same tests pass in different environments. I have tried setting heap to 1024m, 512m and setting the stack to 64k and 128k (and each of these combinations) with no luck. My open files was originally 256 and I have bumped this to 1024. I have been googling around for a bit and all posts say to decrease heap size and increase stack size but that doesnt seem to help. Anyone have anymore ideas? EDIT: Here are is some environment information on my ubuntu box: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 20 file size (blocks, -f) unlimited pending signals (-i) 16382 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited $ java -version java version "1.6.0_24" Java(TM) SE Runtime Environment (build 1.6.0_24-b07) Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)

    Read the article

  • Usage of putty in command line from Hudson

    - by kij
    Hi, I'm trying to use putty in command line from an hudson job. The command is the following one: putty -ssh -2 -P 22 USERNAME@SERVER_ADDR -pw PASS -m command.txt Where 'command.txt' is a shell script to execute in the server through SSH. If i launch this command from the Window command prompt, it works, the shell script is executed on the server machine. If i launch a build of the hudson job configured with this batch command, it doesn't work. The build is running... and running... and running.. without doing anything, and i have to stop it manually. So my question is: Is it possible to launch an external programm (i.e. putty) from an hudson job ? ps: i tried SSH plugin but... not a really good plugin (pre/post build, fail status of the commands launched not caught by hudson, etc.) Thanks in advance for your help. Best regards. kij EDIT: These are the build logs: [workspace] $ cmd /c call C:\WINDOWS\TEMP\hudson7429256014041663539.bat C:\Hudson\jobs\Artifact deployer\workspace>putty -ssh -2 -P 22 USER@SERV_ADD -pw PASS -m com.txt Le build a été annulé Finished: ABORTED And the Hudson.err.log file at the same time (after a stop): 3 juin 2010 18:27:28 hudson.model.Run run INFO: Artifact deployer #6 aborted java.lang.InterruptedException at java.lang.ProcessImpl.waitFor(Native Method) at hudson.Proc$LocalProc.join(Proc.java:179) at hudson.Launcher$ProcStarter.join(Launcher.java:278) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:83) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:601) at hudson.model.Build$RunnerImpl.build(Build.java:174) at hudson.model.Build$RunnerImpl.doRun(Build.java:138) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:416) at hudson.model.Run.run(Run.java:1241) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:124) My shell script only write "hello" in a "hello.txt" file on the server, and nothing is done.

    Read the article

  • OpenVPN bad source address from client

    - by Bogdan
    I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

    Read the article

  • Is encryption really needed for having network security? [closed]

    - by Cawas
    I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. So, what do you think?

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • RPM issues after signing JDK 1.6 64-bit

    - by organicveggie
    I'm trying to sign the Java JDK 1.6u21 64-bit RPM on CentOS 5.5 for use with Spacewalk and I'm running into problems. It seems to sign okay, but then when I check the signature it seems to be missing the key I just used to sign it. Yet RPM shows the key in it's list... # rpm --addsign jdk-6u21-linux-amd64.rpm Enter pass phrase: Pass phrase is good. jdk-6u21-linux-amd64.rpm: gpg: WARNING: standard input reopened gpg: WARNING: standard input reopened # rpm --checksig -v jdk-6u21-linux-amd64.rpm jdk-6u21-linux-amd64.rpm: Header V3 DSA signature: NOKEY, key ID ecfd98a5 MD5 digest: OK (650e0961e20d4a44169b68e8f4a1691b) V3 DSA signature: OK, key ID ecfd98a5 Yet I have the key imported (edited for privacy): # rpm -qa gpg-pubkey* |grep ecfd98a5 gpg-pubkey-ecfd98a5-4caa4a4c # rpm -qi gpg-pubkey-ecfd98a5-4caa4a4c Name : gpg-pubkey Relocations: (not relocatable) Version : ecfd98a5 Vendor: (none) Release : 4caa4a4c Build Date: Mon 04 Oct 2010 10:20:49 PM CDT Install Date: Mon 04 Oct 2010 10:20:49 PM CDT Build Host: localhost Group : Public Keys Source RPM: (none) Size : 0 License: pubkey Signature : (none) Summary : gpg(FirstName LastName <[email protected]>) Description : -----BEGIN PGP PUBLIC KEY BLOCK----- Version: rpm-4.4.2.3 (NSS-3) ...key goes here... =gKjN-----END PGP PUBLIC KEY BLOCK----- And I'm definitely running a 64-bit version of CentOS: # uname -a Linux spacewalk.mycompany.corp 2.6.18-194.11.4.el5 #1 SMP Tue Sep 21 05:04:09 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux Without a valid signature, Spacewalk refuses to install the RPM unless I completely disable signature checking. I have tried this with two different keys and two different users on the same machine without any success. Any bright ideas?

    Read the article

  • PostgreSQL user authentication against PAM

    - by elmuerte
    I am trying to set up authentication via PAM for PostgreSQL 9.3. I already managed to get this working on an Ubuntu 12.04 server, but I am unable to get this working on a Centos-6 install. The relevant pg_hba.conf line: host all all 0.0.0.0/0 pam pamservice=postgresql93 The pam.d/postgressql93 is the default config shipped with the official postgresql 9.3 package: #%PAM-1.0 auth include password-auth account include password-auth When a user tries to authenticate the following is reported in secure log: hostname unix_chkpwd[31807]: check pass; user unknown hostname unix_chkpwd[31808]: check pass; user unknown hostname unix_chkpwd[31808]: password check failed for user (myuser) hostname postgres 10.1.0.1(61459) authentication: pam_unix(postgresql93:auth): authentication failure; logname= uid=26 euid=26 tty= ruser= rhost= user=myuser The relevant content of password-auth config is: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so The problem is with the pam_unix.so. It is unable to validate the password, and unable to retrieve the user info (when I remove the auth entry of pam_unix.so). The Centos-6 install is only 5 days old, so it does not have a lot of baggage. The unix_chkpwd is suid and has execute rights for everybody, so it should be able to check the shadow file (which has no privileges at all?).

    Read the article

  • Linux authentication via ADS -- allowing only specific groups in PAM

    - by Kenaniah
    I'm taking the samba / winbind / PAM route to authenticate users on our linux servers from our Active Directory domain. Everything works, but I want to limit what AD groups are allowed to authenticate. Winbind / PAM currently allows any enabled user account in the active directory, and pam_winbind.so doesn't seem to heed the require_membership_of=MYDOMAIN\\mygroup parameter. Doesn't matter if I set it in the /etc/pam.d/system-auth or /etc/security/pam_winbind.conf files. How can I force winbind to honor the require_membership_of setting? Using CentOS 5.5 with up-to-date packages. Update: turns out that PAM always allows root to pass through auth, by virtue of the fact that it's root. So as long as the account exists, root will pass auth. Any other account is subjected to the auth constraints. Update 2: require_membership_of seems to be working, except for when the requesting user has the root uid. In that case, the login succeeds regardless of the require_membership_of setting. This is not an issue for any other account. How can I configure PAM to force the require_membership_of check even when the current user is root? Current PAM config is below: auth sufficient pam_winbind.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account sufficient pam_winbind.so account sufficient pam_localuser.so account required pam_unix.so broken_shadow password ..... (excluded for brevity) session required pam_winbind.so session required pam_mkhomedir.so skel=/etc/skel umask=0077 session required pam_limits.so session required pam_unix.so require_memebership_of is currently set in the /etc/security/pam_winbind.conf file, and is working (except for the root case outlined above).

    Read the article

  • Why is my Drupal Registration email considered spam by gmail? (headers included)

    - by Jasper
    I just created a Drupal website on a uni.cc subdomain that is brand-new also (it has barely had the 24 hours to propagate). However, when signing up for a test account, the confirmation email was marked as spam by gmail. Below are the headers of the email, which may provide some clues. Delivered-To: *my_email*@gmail.com Received: by 10.213.20.84 with SMTP id e20cs81420ebb; Mon, 19 Apr 2010 08:07:33 -0700 (PDT) Received: by 10.115.65.19 with SMTP id s19mr3930949wak.203.1271689651710; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Return-Path: <[email protected]> Received: from bat.unixbsd.info (bat.unixbsd.info [208.87.242.79]) by mx.google.com with ESMTP id 12si14637941iwn.9.2010.04.19.08.07.31; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) client-ip=208.87.242.79; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) [email protected] Received: from nobody by bat.unixbsd.info with local (Exim 4.69) (envelope-from <[email protected]>) id 1O3sZP-0004mH-Ra for *my_email*@gmail.com; Mon, 19 Apr 2010 08:07:32 -0700 To: *my_email*@gmail.com Subject: Account details for Test at YuGiOh Rebirth MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=yes Content-Transfer-Encoding: 8Bit X-Mailer: Drupal Errors-To: info -A T- yugiohrebirth.uni.cc From: info -A T- yugiohrebirth.uni.cc Message-Id: <[email protected]> Date: Mon, 19 Apr 2010 08:07:31 -0700 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - bat.unixbsd.info X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [99 500] / [47 12] X-AntiAbuse: Sender Address Domain - bat.unixbsd.info X-Source: X-Source-Args: /usr/local/apache/bin/httpd -DSSL X-Source-Dir: gmh.ugtech.net:/public_html/YuGiOhRebirth

    Read the article

  • What does this diagnostic output mean?

    - by ChrisF
    I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

    Read the article

  • Using a named pipe to simulate a serial port on a VMware virtual machine (linux host and client)

    - by Dave M
    Trying to write a python program to create a simulated data stream and feed it, through a named pipe, to a VMware virtual machine. The host is running Ubuntu 11.10 and VMware player 5.0.0. The Vm is running Ubuntu netbook 10.04. I am able to get the pipe working on the local machine but I am not able to get the pipe to pass data through the virtual serial port to the programs running on the virtual machine. #!/usr/bin/python import os # # Create a named pipe that will be used as the serial port on a VMware virtual machine SerialPipe = '/tmp/gpsd2NMEA' try: os.unlink(SerialPipe) except: pass os.mkfifo(SerialPipe) # # Open the named pipe NMEApipe = os.open(SerialPipe, os.O_RDWR|os.O_NONBLOCK) # # Write a string to the named pipe NMEAtime = "235959" os.write(NMEApipe, str( '%s\n' % NMEAtime )) Test to see if the python program is working on the host machine (displays 235959 if data is passing through the pipe) $ cat /tmp/gpsd2NMEA 235959 Serial port as defined in the VMware .vmx file: serial0.present = "TRUE" serial0.startConnected = "TRUE" serial0.fileType = "pipe" serial0.fileName = "/tmp/gpsd2NMEA" serial0.pipe.endPoint = "client" serial0.autodetect = "FALSE" serial0.tryNoRxLoss = "TRUE" serial0.yieldOnMsrRead = "TRUE" Test to see if the serial port in the VM is receiving data $ cat /dev/ttyS0 or $ minicom -D /dev/ttyS0 or $ stty -F /dev/ttyS0 cs8 -parenb -cstopb 115200 $ echo < /dev/ttyS0 None of these display any data from the python program.

    Read the article

  • Bridging my laptop's wireless and wired adaptors

    - by stacey.richards
    I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

    Read the article

  • PHP cannot connect to MySQL

    - by yogal
    Hello, I recently installed Apache 2 + PHP 5.3.1 + MySQL 5.1.44 on my Windows 7 64bit machine following this guide: http://sleeplessgeek.blogspot.com/2010/01/setting-up-apache-php-mysql-phpmyadmin.html It all went fine, php is working great (even with XDebug) but I cannot connect to mysql server. A simple script I wrote to test connection (yes, root has no pass): $username = "root"; $password = ""; $database = "test"; $hostname = "localhost"; $conn = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL Database!!"); It prints this error after 60sec of timeout: Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I can connect to mysql using cmdmysql -h localhost -u root Services are working properly. There also seems to be a problem with PhpMyAdmin (using 3.2.5). As soon as I type user and pass the page loads and turns blank (content-lenght in headers is 0 but status code is 302 Found). Looks like something wrong with cookies (my auth method). I hope someone has a clue, it has to be something dumb simple I missed. Thanks in advance.

    Read the article

  • Moving my OpenID from Livejournal to... something else.

    - by T-Boy
    I've actually been an early user of OpenID, although there are still some questions that I've had with OpenID that I've never really had satisfactorily answered. Now, I understand that if I have full control over my domain, I can set it up so that I can delegate the task of authenticating to another OpenID service provider. The problem is, what I'd like to do is to get the Livejournal server to pass the authentication to someone else, instead of having LJ doing it. Preferably what I'd like to do is get Livejournal, when asked by a authenticating provider, say, "No, I don't do it anymore -- go to this address". The plan was that this address would then be in a domain I fully control, which then would pass it on to whichever service provider I choose. I don't even know if I've gotten my understanding of OpenID right, if all this shenanigans are necessary, if my question makes sense, or if it's even possible with a service provider like Livejournal. (tried tagging this with livejournal, and it told me I couldn't, because I don't have enough reputation. Oh well; one must start somewhere. Sorry for the inconvenience!)

    Read the article

  • Apache: redirect to https before AUTH for server-status

    - by Putnik
    I want to force https and basic auth for server-status output (mod_status). If I enable auth and user asks for http://site/server-status apache first asks for pass, then redirects to httpS, then asks for pass again. This question is similar to Apache - Redirect to https before AUTH and force https with apache before .htpasswd but I cannot get it work because we are speaking not about generic folder but Location structure. My config (shortly) is as follows: <Location /server-status> SSLRequireSSL <IfModule mod_rewrite.c> RewriteEngine on RewriteBase /server-status RewriteCond %{HTTPS} off RewriteCond %{SERVER_PORT} 80 RewriteRule ^ - [E=nossl] RewriteRule (.*) https://site/server-status} [R=301,L] </IfModule> SetHandler server-status Order deny,allow Deny from all Allow from localhost ip6-localhost Allow from 1.2.3.0/24 Allow from env=nossl AuthUserFile /etc/httpd/status-htpasswd AuthName "Password protected" AuthType Basic Require valid-user Satisfy any </Location> I assume Allow from env=nossl should allow everyone with RewriteCond %{HTTPS} off and server port 80, then force it to redirect but it does not work. Please note, I do not want force to SSL the whole site but /server-status only. If it matters the server has several sites. What am I doing wrong? Thank you.

    Read the article

  • Preventing h/w RAID cards from dropping slow JBOD disks

    - by Kevin
    I'm considering buying a used SAS h/w RAID card for externally attaching HDDs to an HP ProLiant I'm setting up. However, I only require RAID functionality on some of the drives. Theoretically it should be simple to JBOD the other drives, but some of them are inexpensive SATA disks and probably cannot have TLER disabled. I'd like to know, prior to actually ordering a RAID card, whether typically RAID cards would still enforce dropping of disks that do not respond within a few seconds, even if the disk is in a JBOD, and whether there is any way to disable this. Ideally it would be nice to be able to select certain SAS ports that will be pass-through, bypassing the RAID engine entirely and just acting as an HBA for those ports. I know I could buy a separate SAS HBA but that seems like a waste of $ and is also impractical as it's a 1U server so space is extremely limited. My question then is whether the functionality I'm looking for (pass-through on certain ports or at least JBOD drives not getting themselves dropped due to slow response) is typical of proper h/w RAID cards such as PERC 5/E etc. I've browsed through the latter's manual but unfortunately, as with most user manuals, it states the obvious and doesn't state the unobvious. Thanks for any info, Kevin

    Read the article

  • Windows 2008 R2 RDS - Double Login

    - by colo_joe
    Issue: Double logins when connecting to RemoteApps or Remote Desktop Environment: Gateway = 1 server 2008 R2 - Roles = Gateway, Session Broker, Connection Mgr, Session Host Configuration server Session hosts = 2 servers 2008 R2 - Roles = App Manager and Session host configuration Testing: I can get to the url http://RDS.domain.com/rdweb - I get prompted for authentication (1) Pass authentication, get list of remote apps. Click on remoteapps or remote desktop, get prompted for authentication again (2). Pass authentication, I get access to app or RDP. Done so far. On session host Signed rdp files with cert. Added the following to the custom RDP settings: Authenticaton level:i:0 = If server authentication fails, connect to the computer without warning (Connect and don’t warn me). prompt for credentials on client:i:1 = RDC will prompt for credentials when connecting to a server that does not support server authentication. enablecredsspsupport:i:1 = RDP will use CredSSP, if the operating system supports CredSSP. Edited the javascript file as found in http://support.microsoft.com/kb/977507 Added Connection ID, and added Web Access server to TS Web Access Computers group on the Session host servers, and Signed apps as found in hxxp://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx Note: This double login happens internally and externally.

    Read the article

  • esx5 debian VM vlan setup

    - by Kstro21
    i have a server with ESX5, have a switch with about 20 vlans, this is how setup the trunk port interface GigabitEthernet0/1/1 description ToOper port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 2 to 14 stp disable ntdp enable ndp enable bpdu enable then, i created a standar switch(sw1) using the vSphere Client, the VLAN ID is set to All (4095), i also created a VM with Debian 6, with a NIC connected to sw1, now, i want to configure this NIC for a selected group of vlans auto vlan10 iface vlan10 inet static address 11.10.1.0 netmask 255.255.255.224 mtu 1500 vlan_raw_device eth0 auto vlan14 iface vlan14 inet static address 11.10.1.65 netmask 255.255.255.248 mtu 1500 vlan_raw_device eth0 so, when i restart the network using /etc/init.d/networking restart, i got this error Reconfiguring network interfaces...SIOCSIFADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFMTU: No such device vlan14: ERROR while getting interface flags: No such device Failed to bring up vlan14. done. this is just part of the error, so, my questions is: is this possible?, i mean, what i'm trying to achieve using ESX Virtual Machines, VLANS, etc is this a Debian problem? can be solved? i've read about a file named z25_persistent-net.rules in Debian but it doesn't exist in my installation. in the In the vSphere Networking for ESX5 guide, you can read: If you enter 0 or leave the option blank, the port group can see only untagged (non-VLAN) traffic. If you enter 4095, the port group can see traffic on any VLAN while leaving the VLAN tags intact. So, in theory, it should work, right? Hope you can help me up with this one Thanks

    Read the article

  • SFTP, SCP, Secure Webdav: which is the most suitable ?

    - by Xavier Maillard
    Hi, currently, I am hosting a webdav share setup in order to store files I need anywhere I am. It is available via HTTPS. Things are that I do not need all the HTTP machinery -i.e. my nginx http server is only there for this webdav folder. I am not sure I made the best choice. My requirements on the client side are: secured transfers mountable as a network drive at work with 'near realtime sync' usable for any OS I could use (including my mobile (android)) At first, I chose webdav since it would pass through my work proxy (which refuses all that is not on HTTP/S (port 80 or 443)). Today, I am not satisfied with the setup and even if nginx memory footprint is pretty small, its webdav support is not really "clean" and full. What would you recommend between SFTP, SCP and the current webdav solution ? I think SFTP is the closest solution but I still have to find out how to pass through my proxy ;) SCP seems quite limited as I read about it (only file transfers if I read right). Cheers

    Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >