Search Results

Search found 10549 results on 422 pages for 'recovery console'.

Page 266/422 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

  • CentOS: eth0 not starting on boot

    - by Cameron Aziz
    Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

    Read the article

  • Starting Redmine at boot using upstart on Ubuntu

    - by joekr
    So after installing redmine from the repositories on Ubuntu 12.04, i've tried to create an upstart script (see below) so it would start up at boot time. While service redmine start does start redmine, it does not start automatically when booting. Also when i run service redmine stop it does stop redmine but simply hangs until i press ctrl+c Also, after stopping starting it again does not work (Also just hangs). From all the upstart examples and tutorials i have seen this should work, so i guess i'm overlooking something. Any hints ? #Redmine description "Redmine" start on started networking stop on stopping networking stop on starting shutdown console output expect daemon exec ruby /usr/share/redmine/script/server webrick -e production -b 188.40.184.155 -p 3000 -d respawn EDIT: Fixed "typo"

    Read the article

  • WINEHQ - wine_gecko won't init - HTML Rendering disabled

    - by Nick
    Hello Super Users, I'm currently trying to get a windows compiled program to work through Wine to run on Linux and MacOSX. When I run the program through wine, it prompts me to install Gecko which I do. Later on in the program, it attempts to use MSHTML to render HTML but I get these error messages on my console instead. err:mshtml:init_xpcom NS_InitXPCOM2 failed: 80004005 err:mshtml:HTMLDocument_Create Failed to init Gecko, returning CLASS_E_CLASSNOTAVAILABLE fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {25336920-03f9-11cf-8fd0-00aa00686f13}, hres is 0x80040111 I'm using Wine 1.1.34 and a similar bug was supposedly fixed in 1.1.33 http://bugs.winehq.org/show_bug.cgi?id=12578 I've been at this all afternoon, is there anything I'm missing? Thanks, Nick

    Read the article

  • KVM Virtual guest Paused on Reboot

    - by David Hamilton
    I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

    Read the article

  • Exchange 2007 - How to use export-mailbox function?

    - by Khalid Rahaman
    I am trying to use the Export-Mailbox cmdlet to export a mailbox to PST file but i get an error that i'm running on a 64bit machine and must use a 32 bit etc etc.. I have a Windows 7 Pro 32bit PC joined to the domain with the exchange server, and outlook 32bit installed. When i try to install Exchange 2007 32bit management console only, i'm told that i can't install the managemnet tools on a Windows 7 PC. Can someone please advise if this is correct setup to be able to run the export-mailbox function to dump the mailboxes into PST files. Thank you

    Read the article

  • cannot connect to MS FTP 7.5 on Windows 2008 on Amazon EC2 instance

    - by minerj
    I have just installed the MS FTP 7.5 upgrade on my Windows 2008 Server (Service Pack 2) running on an Amazon EC2 instance. In the FTP Firewall Support settings for the server in IIS Manager I have set up the passive port range 45001 - 45005 and also set the External Firewall IP address to match the assigned Amazon Elastic IP address. Using the AWS Console I changed the Security Group for the server to allow access to the server through ports 21 and 45001 through 45005. Using an FTP client (either the command line FTP client or Windows Explorer) on the Amazon server I can connect to the FTP server but I cannot connect with an external FTP client. When I checked to see which ports were open on the server using Shields Up it shows that port 21 is open but ports 45001 to 45005 are closed. I assume I'm missing something. Any help greatly appreciated.

    Read the article

  • HP ProLiant DL320e G8 v2 - USB2.0 during POST

    - by user3513346
    Initially my USB2.0 ports were working during POST (and boot). However, now they appear not to be. I first noticed this when I could not access the RBSU by pressing F9 during POST. Then found that I couldn't boot from USB either (I was able to do both of these initially). When performing the boot via iLo remote console I can access all of the setups (i.e., all of the F(X)'s) and can boot virtual media from a 'removable drive'. Keyboard works fine once the OS is booted. Not really sure what to try here. Any advice would be greatly appreciated. Thanks. Nick.

    Read the article

  • How to make cygwin shortcut stick to Windows 7 dock

    - by Frank Krueger
    I have recently installed cygwin on a Windows 7 beta machine. Everything works great, except one little annoyance: The cygwin shortcut (Start-All Programs-cygwin-cygwin Bash Shell) cannot be pinned to the Start menu. My guess as to why is that I already have a "Console" window pinned to the start menu. My guess is that Windows sees that the two EXEs are the same and won't let me pin it. This would be fine except I cannot pin the window to the Dock either. While cygwin is running, WIndows interprets it as just a Command Window and won't let me pin it either. How do you pin the cygwin shortcut to the dock?

    Read the article

  • Can't star SSH on Ubuntu 12.10 AWS EC2

    - by Conor H
    So i've just started playing around with Ubuntu on Amazon EC2. I've just issued the following command to restart ssh but it has now "killed" ssh. sudo /etc/init.d/ssh restart I can't seem to ssh to this instance anymore. Putty just gives me "connection refused". NOTE: In this case I just restarted SSH to see the result. I didn't change any settings. This was to confirm that it was the restart command was the problem and not any configs I made. What is the correct way to restart SSH? P.S. That usually works on other Ubuntu boxes. Thanks. EDIT: It is also worth noting that when I ran that command I was taken straight back to a prompt. I didn't get any output on the console.

    Read the article

  • MySQL taking a long time to start

    - by Dscoduc
    I'm running Windows Server 2008 with MySQL installed and every time I reboot the server the MySQL Service doesn't start right away. A look into the Windows Eventlog shows that the MySQL Service was hung at startup. Looking at the Services.msc console shows the service state at Starting... Eventually, like 10 minutes, the MySQL Service actually finishes the startup process and the database becomes available for my Wordpress server... I looked at the MySQL .err files and didn't find anything that would indicate a delay in the statup process... Can anyone suggest a way to determine what is causing the delay, and more importantly, how to prevent the delay in the MySQL Startup?

    Read the article

  • Find BIOS update for HP Pavilion xt966

    - by NitroxDM
    I installed FreeNAS on a HP Pavilion xt966. Every three seconds or so I message comes up on the console. acpi_tz0: _TMP value is absurd, ignored (-270.2C) From what I have been able to find this is because of a bug in the BIOS... but I have yet to find an update for it. HP's site only shows drivers. FreeNAS is build on BSD. Anyone know where to find a BIOS update for this unit?

    Read the article

  • Monitoring on java daemon on centos

    - by user111196
    I have a java application which I run using yasjw tool as a daemon. I need to monitor it in case it goes down I need some kind of alert or even restart it. Is there any tool can help me do this on centos environment? The results of ps -ef | grep java root 3109 1 0 Apr06 ? 00:04:35 /usr/java/jdk1.6.0_18/bin/java -Dwrapper.pidfile=/var/run/wrapper.commServer.pid -Dwrapper.service=true -Dwrapper.visible=false -jar /usr/local/yajsw-beta-10.2/wrapper.jar -c /usr/local/yajsw-beta-10.2/conf/wrapper.conf root 3132 3109 0 Apr06 ? 00:25:26 /usr/java/jdk1.6.0_18/bin/java -classpath /usr/local/yajsw-beta-10.2/./wrapperApp.jar:/usr/local -Xrs -Dwrapper.service=true -Dwrapper.console.visible=false -Dwrapper.visible=false -Dwrapper.pidfile=/var/run/wrapper.commServer.pid -Dwrapper.config=/usr/local/yajsw-beta-10.2/conf/wrapper.conf -Dwrapper.port=15003 -Dwrapper.key=4276015160565963367 -Dwrapper.teeName=4276015160565963367$1333699547154 -Dwrapper.tmpPath=/tmp org.rzo.yajsw.app.WrapperJVMMain root 23986 23945 0 16:53 pts/0 00:00:00 grep java pidof java 3132 3109

    Read the article

  • How to setup tomcat 7 as a server on windows 2008 server

    - by birdy
    I setup the tomcat7 as a service as below: c:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32\bin>service.bat install Installing the service 'Tomcat7' ... Using CATALINA_HOME: "C:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32" Using CATALINA_BASE: "C:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32" Using JAVA_HOME: "C:\Program Files (x86)\Java\jdk1.7.0_09" Using JRE_HOME: "C:\Program Files (x86)\Java\jdk1.7.0_09\jre" Using JVM: "C:\Program Files (x86)\Java\jdk1.7.0_09\jre\bin\server\ jvm.dll" However, when I try to start the service, I Get the error below: c:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32\bin>tomcat7.exe %1 is not a valid Win32 application. Failed to run service as console application This is the file I downloaded from apache: apache-tomcat-7.0.32-windows-x64.zip. I am able to successfully start tomcat on port 8080 as a standalong thing. Meaning I go to command prompt and type startup.bat and it starts up successfully. Question How can I resolve this and what are the things I should be troubleshooting for?

    Read the article

  • need to run command against multiple lines in file that start with ica-tcp

    - by Nick Parsells
    I want to run a command on each line of a file I have, however its a bit more complicated then I originally thought. The file contents look like this typically; however there are sometimes more connections: SESSIONNAME USERNAME ID STATE TYPE DEVICE services 0 Disc console 1 Conn t-rpal 48 Disc ica-tcp#0 bpofiretest 50 Active wdica rdp-tcp#2 a-nparsells 51 Active rdpwd ica-tcp 65536 Listen rdp-tcp 65537 Listen The command I want to run is reset session ica-tcp#0. I also want to run the same command on any additional connections that start with ica-tcp that the scripts finds in the file. How can I write a script like that in powershell? thanks!

    Read the article

  • Remote support via VPN without split tunnel

    - by Robe Eleckers
    my title might not be very clear, but I'll explain my setup in more detail now. We have several customers (companies) that need to be remotely supported. At these customers we have servers running with our software that needs to be serviced. These servers are (almost) never connected to the internet. For this we have multiple PC's running VPN clients. These PC's run a VNC server so our service engineers can login from their home laptop remotely to these PC's and connect from there to our customer via the VPN connection on the PC. The problem is however that several customers do not allow split tunneling. That means that when we connect via VPN to such a customer the VNC connection drops. Our current workaround is using a Citrix VM which we control via XenCenter console, but it's quite slow. Are there common solutions to handle this?

    Read the article

  • How to add/remove codecs in linux

    - by agg
    Friends, I'm new to Linux, I need to work on Linux. I have ported Linux to AT91SAM9261-EK board. Now i need to work on Codecs. I just know the definition of codec from wikipedia, Now i need add my own codec to the board. I want to know, Where codec will be preset in 1)File System, 2)Kernel or 3)Player And how to add codec while building entire source, please tell me the steps i need follow. And also how to remove the codec. How to play the video files from pendrive in console, now i can play audio by command 'mplayer "filename" '. Don't know how to play video. Please help me, How to do this. Regards AGG

    Read the article

  • ESXI ftpput fails Syntax problem

    - by Datapimp23
    I'm trying to ftpput my virtual machines dirs to our NAS. Which doesn't support NFS. Only FTP and samba. So I'm in the ESXi console and enter the followin command ftpput ipaddress /vmfs/volumes/4a1157e1-be81171a-1b39-001d09080124/VMNAME /Backup /Backup is a public share on the nas, I can access it through any ftp client. After I enter I get the following ftpput: can't open 'Backup': No such file or directory I'm kind of in the dark here. Any suggestions?

    Read the article

  • Set Users as chrooted for sftp, but allow user to login in SSH

    - by Eghes
    I have setup a ssh server on debian 7, to use sftp connection. I chrooted some user, with this config: Match Group sftpusers ChrootDirectory /sftp/%u ForceCommand internal-sftp But if i want login with one of this chrooted users in ssh console, they get logged, but autoclose the connection. In logs I see: Oct 17 13:39:32 xxxxxx sshd[31100]: Accepted password for yyyyyy from zzz.zzz.zzz.zzz port 7855 ssh2 Oct 17 13:39:32 xxxxxx[31100]: pam_unix(sshd:session): session opened for user yyyyyyyyyyyy by (uid=0) Oct 17 13:39:32 d00hyr-ea1 sshd[31100]: pam_unix(sshd:session): session closed for user yyyyyyyyyyyy How can I chroot a user only for sftp, and use it as a normal user for ssh?

    Read the article

  • GF 3.0.1 + Virtual Server: www.myhost.com:8080/projectname-war => www.myhost.com. How?

    - by Harry Pham
    I need to change www.myhost.com:8080/myproject-war to www.myhost.com. This is what I try. In admin console in Glassfish 3.0.1, I create a http-listener-3 with port 9090 and address 0.0.0.0 (I want to have port 80, but got access-denied or some sort). I then create a virtual server call scholar, with Id=scholar, Hosts=${com.sun.aas.hostName}, Network Listeners: http-listener-3, Default Web Module=project#project-war.war(it is the only option from the drop down list since I only deploy 1 app). Then under Applications, I set the virtual server of the application to be scholar. Save and restart. I try localhost:9090, and expecting that it will load my project like as if I type localhost:9090/project-war. But it does not. I already set the Default Web Module, to be the project, why doesnt it load the project by default?

    Read the article

  • Redhat 6 gui installation VS kickstart gives me different packages?

    - by jonaz
    If i do the graphical install and select basic server + aide and screen i get a system with 535 installed packages. If i look at the /root/anaconda-ks.cfg file in that freshly installed system i see: %packages @base @console-internet @core @debugging @directory-client @hardware-monitoring @java-platform @large-systems @network-file-system-client @performance @perl-runtime @security-tools @server-platform @server-policy @system-admin-tools pax python-dmidecode oddjob sgpio certmonger pam_krb5 krb5-workstation nscd pam_ldap nss-pam-ldapd perl-DBD-SQLite aide screen If i then install a NEW system using a kickstart only containing those packages i get 620 installed packages. So basicly my question is why does the system install almost 100 more packages when using kickstart compared to the GUI installation when the exact same packagegroups are selected?

    Read the article

  • Mac ASL: Unable to see my application's log messages

    - by trojanfoe
    I have just added ASL logging support to my application but I cannot see any log entries using Console.app. I am logging with facility 'com.mydomain.myapp' (that's not the actual value) and have even added an entry to /private/etc/asl.conf to tell syslogd to 'store' entries at this Facility (with any Level): ? [= Facility com.mydomain.myapp] store I HUP'd syslogd with no success so I restarted my MacBook Pro, which also made no difference. I know my application is logging OK as I have added the option ASL_OPT_STDERR when calling asl_open() and can see the entries on stderr. Any help would be must appreciated!

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • cannot connect to MS FTP 7.5 on Windows 2008 on Amazon EC2 instance

    - by minerj
    I have just installed the MS FTP 7.5 upgrade on my Windows 2008 Server (Service Pack 2) running on an Amazon EC2 instance. In the FTP Firewall Support settings for the server in IIS Manager I have set up the passive port range 45001 - 45005 and also set the External Firewall IP address to match the assigned Amazon Elastic IP address. Using the AWS Console I changed the Security Group for the server to allow access to the server through ports 21 and 45001 through 45005. Using an FTP client (either the command line FTP client or Windows Explorer) on the Amazon server I can connect to the FTP server but I cannot connect with an external FTP client. When I checked to see which ports were open on the server using Shields Up it shows that port 21 is open but ports 45001 to 45005 are closed. I assume I'm missing something. Any help greatly appreciated.

    Read the article

  • why does and EBS volumes mounted in an Ubuntu 12.04 EC2 instance as /dev/sdh1 appear as /dev/xvdh1?

    - by Andres
    When mounting an EBS volume on ubuntu specified as /dev/sdh1 it actually mounts it at /dev/xvdh1. The aws console still thinks it's mounted at /dev/sdh1 so it took a while to realize that it was actually mounted, just in the wrong place I ran into this problem a long time ago using ubuntu on ec2. I just ran into it again https://forums.aws.amazon.com/post!reply.jspa?messageID=351382 and it seems like I'm not alone: https://forums.aws.amazon.com/thread.jspa?threadID=68957&tstart=0 I haven't found a good answer as to why this happens or how to fix it. Any ideas?

    Read the article

  • Outgoing mail from linux not being delivered

    - by Jason
    I can't seem to send mail through my php scripts or through the linux console on my Centos 5.5 LAMP server, when the email is addressed to go to a domain that is hosted by my box. I think it is something to do with the email routing internally, or the DNS servers that the box uses not reporting the correct MX records. Basically my box doesn't host any mail, it's all hosted on google apps. My name servers are hosted by a 3rd party provider and I am using webmin. Webmin doesn't recognise the settings on the 3rd party provider. I'm unsure how to fix this. Previously when I had this problem on a cpanel server, I would edit the remotedomains and localdomains files, moving domains from one file to another and it would fix the problem. What information do I need to provide for anyone to work out what the issue is? Thanks

    Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >